Groschopp 02000 specsheet
•
0 likes•16 views
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque/speed curve. Key details are the motor runs at 2350 rpm and 2 poles on a continuous duty cycle with 70.4% efficiency and can output 3.9lb-in of torque at 12.44 amps of current. Performance curves show torque and efficiency across a range of speeds.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 01000 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications are a no-load speed of 2400 rpm, maximum torque of 1.7 lb-in, maximum current of 5.9 amps, continuous duty cycle, and peak efficiency of 68.2%. Performance curves show torque and efficiency at varying speeds from 0 to 3600 rpm.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Performance charts show torque and efficiency across various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Groschopp 01001 specsheet
This document provides specifications for a PM 6015 motor that operates at 24V DC with a maximum speed of 2400 rpm. The motor produces 2.0 lb-in of torque at its rated speed of 2378 rpm, has a continuous duty cycle, and a maximum efficiency of 76.1%. It requires 3.1 amps of current and can produce start/stall torque of 9.38 lb-in while drawing 14.69 amps of current. Charts show the motor's torque and efficiency characteristics across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor that runs at 2500 rpm, produces 0.1012 HP (75W) of power at 2452 rpm, and has a maximum efficiency of 63.6%. Charts show its torque and efficiency output across a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Recommended
Groschopp 01000 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications are a no-load speed of 2400 rpm, maximum torque of 1.7 lb-in, maximum current of 5.9 amps, continuous duty cycle, and peak efficiency of 68.2%. Performance curves show torque and efficiency at varying speeds from 0 to 3600 rpm.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Performance charts show torque and efficiency across various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Groschopp 01001 specsheet
This document provides specifications for a PM 6015 motor that operates at 24V DC with a maximum speed of 2400 rpm. The motor produces 2.0 lb-in of torque at its rated speed of 2378 rpm, has a continuous duty cycle, and a maximum efficiency of 76.1%. It requires 3.1 amps of current and can produce start/stall torque of 9.38 lb-in while drawing 14.69 amps of current. Charts show the motor's torque and efficiency characteristics across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor that runs at 2500 rpm, produces 0.1012 HP (75W) of power at 2452 rpm, and has a maximum efficiency of 63.6%. Charts show its torque and efficiency output across a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2350 RPM with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2351.9 rpm with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds. The motor has a 75.5% efficiency rating and was manufactured by Groschopp.com.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output up to 28.49 lb-in of torque when drawing 11.37 amps of current during start/stall conditions. Charts show the motor's torque and efficiency performance at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power, produces 108 watts of power, and has a continuous duty cycle and efficiency of 71.7%. Charts show the motor's torque and efficiency output across different speed ranges.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are a 115V motor running at 2500 rpm that produces 0.1012 HP (75W) of power at 63.6% efficiency. Startup draws 7.18A of current and produces 25 lb-in of torque. Charts also show the motor's torque and efficiency at varying speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor running at 2500 rpm that produces 0.1012 HP (75 watts) of power at 2452 rpm with a maximum torque of 2.6 lb-in and current of 1.18 amps, and has a continuous duty cycle and efficiency of 63.6%.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02011 specsheet
This document provides specifications for a PM 8014 motor with a rating of 0.1354 HP that operates at 3878 RPM. The motor has a torque of 2.2 lb-in, current of 1.56 amps, and power output of 101 watts. It has a continuous duty cycle and efficiency of 64.7% for both the motor and system alone. Under start or stall conditions, the motor draws 12.29 amps and produces 27.7 lb-in of torque. A graph shows torque and efficiency over a range of speeds from 0 to 4500 RPM.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 02000 specsheet
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2350 RPM with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2351.9 rpm with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds. The motor has a 75.5% efficiency rating and was manufactured by Groschopp.com.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output up to 28.49 lb-in of torque when drawing 11.37 amps of current during start/stall conditions. Charts show the motor's torque and efficiency performance at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power, produces 108 watts of power, and has a continuous duty cycle and efficiency of 71.7%. Charts show the motor's torque and efficiency output across different speed ranges.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are a 115V motor running at 2500 rpm that produces 0.1012 HP (75W) of power at 63.6% efficiency. Startup draws 7.18A of current and produces 25 lb-in of torque. Charts also show the motor's torque and efficiency at varying speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor running at 2500 rpm that produces 0.1012 HP (75 watts) of power at 2452 rpm with a maximum torque of 2.6 lb-in and current of 1.18 amps, and has a continuous duty cycle and efficiency of 63.6%.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02011 specsheet
This document provides specifications for a PM 8014 motor with a rating of 0.1354 HP that operates at 3878 RPM. The motor has a torque of 2.2 lb-in, current of 1.56 amps, and power output of 101 watts. It has a continuous duty cycle and efficiency of 64.7% for both the motor and system alone. Under start or stall conditions, the motor draws 12.29 amps and produces 27.7 lb-in of torque. A graph shows torque and efficiency over a range of speeds from 0 to 4500 RPM.
Similar to Groschopp 02000 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Recently uploaded (20)
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Groschopp 02000 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 12 v DC 2350 rpm 2 Poles None Product ID: 2000 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 2330.0 rpm 3.9lb-in 12.44 amps 108 watts 0.1442 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 70.4 % 70.4 % Start/Stall Conditions: Current: Torque: 61.82 amps 22.00 lb-in Constants: Ke: 4.34 v/krpm Kt: 0.37 lb-in/amp Torque (lb-in) Speed RPM Efficiency 300 0 0.0 2.5 600 5.0 900 7.5 1200 10.0 1500 12.5 1800 15.0 2100 17.5 2400 20.0 2700 22.5 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com