Ground Effects Energy (GEE) manufactures an advanced wastewater treatment system called the ElectroPure Technology (EPT) that uses electrocoagulation to remove contaminants from wastewater. The EPT can treat a variety of industrial wastewaters in a compact, automated system. It has a small footprint, is mobile, easy to operate, and more effective at treating difficult wastewaters than traditional chemical treatment. GEE seeks partners to provide wastewater treatment services to industries using the EPT system.
Thermoelectric generators convert heat directly into electricity using a fuel source for heat, a hermetically sealed thermopile, and cooling fins. These generators are a positive and cost effective solution for remote power requirements, having operational and cost benefits over batteries and solar sources for many applications.
4C Technologies provides renewable energy and project management services globally. They have expertise in wind, solar, and a new technology called Searl Effect Generator (SEG) which uses rotating magnets to generate electricity without fuel. 4C Technologies has exclusive rights to manufacture, sell, and maintain SEG products in partnership with its inventors. The SEG can power homes and larger megawatt scale projects, producing unlimited renewable energy on-site.
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and RegulationsKeith D. Patch
2nd Meeting of the ASME IGTI ORC Power Systems Committee; Technical Subcommittee on Standards and Regulations; ASME Turbo Expo 2014; CCD Congress Center; Dusseldorf, Germany; Tuesday June 13, 2014; 5 - 8 PM CET
PVSyst is a standard tool for determining the generation from a solar plant, however there is little standardisation over the losses to be assumed.
Based on Gensol's experience, every loss has been analysed & through this document we are indicating on the loss percentage to be assumed.
Gensol provides detailed design services for solar power plants, including electrical, structural, and civil engineering. The objective is to ensure plant equipment is compatible and capable of meeting functional requirements. The design must comply with standards and regulations while optimizing aspects like plant layout, equipment selection, and operability. Gensol's experienced engineers check parameters like module configuration, cable sizing, and mounting structure design to deliver robust, cost-effective solar plant designs.
This document discusses Potential Induced Degradation (PID), its causes and effects on photovoltaic systems. It introduces Pidbull, a patented technology developed by Edison Energy to prevent, detect, and cure PID issues. Pidbull units have been successfully tested on Edison Energy's solar plants and for other developers and investors, improving performance ratios by up to 20% for affected systems. The document provides technical specifications for the Pidbull system and case studies of its successful implementation.
The document describes the Palomar Technologies 6500 Die Bonder, which is a precision assembly machine for semiconductor packaging. It can achieve placement accuracy of +/- 1.5 microns and has features like a 6 position tool turret, programmable eutectic pulse heating, and large work area. The die bonder is versatile and can be used for applications like hybrid modules, MEMS components, and optoelectronic packaging. Palomar also offers related equipment and automated assembly lines integrating die bonders, fluid dispensers, and other tools.
Thermoelectric generators convert heat directly into electricity using a fuel source for heat, a hermetically sealed thermopile, and cooling fins. These generators are a positive and cost effective solution for remote power requirements, having operational and cost benefits over batteries and solar sources for many applications.
4C Technologies provides renewable energy and project management services globally. They have expertise in wind, solar, and a new technology called Searl Effect Generator (SEG) which uses rotating magnets to generate electricity without fuel. 4C Technologies has exclusive rights to manufacture, sell, and maintain SEG products in partnership with its inventors. The SEG can power homes and larger megawatt scale projects, producing unlimited renewable energy on-site.
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and RegulationsKeith D. Patch
2nd Meeting of the ASME IGTI ORC Power Systems Committee; Technical Subcommittee on Standards and Regulations; ASME Turbo Expo 2014; CCD Congress Center; Dusseldorf, Germany; Tuesday June 13, 2014; 5 - 8 PM CET
PVSyst is a standard tool for determining the generation from a solar plant, however there is little standardisation over the losses to be assumed.
Based on Gensol's experience, every loss has been analysed & through this document we are indicating on the loss percentage to be assumed.
Gensol provides detailed design services for solar power plants, including electrical, structural, and civil engineering. The objective is to ensure plant equipment is compatible and capable of meeting functional requirements. The design must comply with standards and regulations while optimizing aspects like plant layout, equipment selection, and operability. Gensol's experienced engineers check parameters like module configuration, cable sizing, and mounting structure design to deliver robust, cost-effective solar plant designs.
This document discusses Potential Induced Degradation (PID), its causes and effects on photovoltaic systems. It introduces Pidbull, a patented technology developed by Edison Energy to prevent, detect, and cure PID issues. Pidbull units have been successfully tested on Edison Energy's solar plants and for other developers and investors, improving performance ratios by up to 20% for affected systems. The document provides technical specifications for the Pidbull system and case studies of its successful implementation.
The document describes the Palomar Technologies 6500 Die Bonder, which is a precision assembly machine for semiconductor packaging. It can achieve placement accuracy of +/- 1.5 microns and has features like a 6 position tool turret, programmable eutectic pulse heating, and large work area. The die bonder is versatile and can be used for applications like hybrid modules, MEMS components, and optoelectronic packaging. Palomar also offers related equipment and automated assembly lines integrating die bonders, fluid dispensers, and other tools.
The ESC (Electro Separation Cell) is a system developed by Ground Effects Clean Mud Solutions Inc. that uses proprietary electrode technology and an applied electric field to remove ultrafine solids smaller than 6 microns from drilling mud. The ESC is a highly effective system that is compact, mobile, and easy to operate. It provides significant cost savings for customers by consistently and reliably removing colloidal solids without using heat, chemicals, or producing waste.
PATENTED AND PROVEN ENERGY OPTIMIZATION SYSTEM WITH 8-12 % IMMEDIATE ENER...Andrew Dmitrev
The transition to a sustainable future starts with energy efficiency. Our product – Smart-Optimizer ECOD – is a proven, patented and scalable system for energy optimization. With a fast payoff time, normally 12-24 months, and electricity savings in the range of 8-12 %; ECOD is a simultaneously profitable and scalable product.
ECOD is keeping the power at the minimum of tolerance range, reduces harmonic distortion, and reduces reactive power. The end-result is an innovative, yet highly effective, system to optimize and save on the electricity consumption.
ECOD’s patented technology – proven effective by numerous successful installations – controls the voltage to the actual loads and keeps the current within optimal range for efficiency. At every moment the network will operate with the smallest possible energy consumption.
BENEFITS FROM ECOD:
Average of 8-12 % savings on the electricity bills
Pro-longs the life-span of electrical equipment
Short payoff period 12-24 months
Scalable and dynamic for property portfolios
Compatible for indoors/outdoors installations
Simple and fast installation
Completely self-sufficient
10-years warranty
Light and small, easy to find room for
Remote monitoring and analysis by app
Overvoltage protection
Bảng giá máy cắt không khí ACB Easypact EVS schneider
Long Nguyễn đại lý phân phối máy cắt không khí Schneider tại Việt Nam
http://longnguyenvn.com/category/acb-evs-schneider
The Austrian market leader for timing and monitoring relays.With a wide range of timing relay products and monitoring devices
Providing high-quality industrial switching devices and power electronics.
Ensures safety and energy efficiency!
We, JIS Electric is the authorized sole distributors and stockiest for Tele Haase products in the Middle East Region, and we can supply any products for any industrial applications.
Contact us for more details,
Call: 04 4277207
Email: info@jiselectric.com
Visit: www.jiselectric.com
Pure Water Group is specialized in High Purity and Ultra Pure Water applications. Since more than 20 years the development of membrane filtration and Electro Deionization systems is our main focus. Based on our knowledge and experience, equipment is manufactured for water system integrators across the world. Our clients implement the equipment in the process and power industry, the pharmaceutical industry and at hemodialysis centers. As Ionpure 'Master Service Provider' we distribute CEDI modules and accessories direct from our European warehouse. The branch and product knowledge enable us to guarantee qualitative high-end solutions which meet your expectations on every level.
Elohim Industrial Sales, Inc. (EISI), an ISO 9001:2008 Certified, Exclusive Distributor of Hager and Euromate in the Philippines.
EISI is a leading Solutions Provider and Systems Integrator of Schneider Electric Automation in the Philippines. EISI also carry the SCHNEIDER ELECTRIC POWER METERS and HARMONICS filter products.
EISI is committed to total quality service. We offer business operations with innovative solutions through conceptualization, design and engineering, project management, testing and implementation, training, calibration and after sales support.
تستخدم هذه الوحدات للمعالجة و التطهير فى تطبيقات مياه الشرب, عمليات إعادة تدوير المياه, صناعات الأغذية و المشروبات, المزارع السمكية و حمامات السباحة و بصفة أشمل تصلح للتطبيقات الصناعية و المختبرات و المحطات التجريبية, تنتج هذه الأنظمة حتى 400 جم/ساعة من الأوزون عالى التركيز بأقل استهلاك للطاقة و الأكسجين نظرا للإنتاجية عالية التركيز
يتم مراقبة و عرض معاملات العملية التشغيلية فى هذه الوحدات بصفة مستمرة لضمان موثوقية سير التشغيل, وتتضمن الوحدة العديد من المكونات الأساسية مثل مولدى غاز الأوزون و الأكسجين, وحدات تحكم كهربائية مرفقة بمبادلات إشارات, الأسلاك و الأنابيب المثبتة على إطار من الإستانليس ستيل و مكونات أخرى إضافية حسب حاجة التشغيل
http://rheoserve.com/index.html#portfolio
(B) pepco energy solutions overview document emailsgraham007
Pepco Solutions specializes in reducing the energy consumption and costs of industrial and commercial facilities through the installation of passive technologies. They can produce average savings of 10-20% on energy bills while electrical loads are in operation, reducing operating costs. Pepco Solutions utilizes proven technologies like motorized liners and lighting controllers to improve power quality and factor, increase electrical system capacity, and reduce unnecessary heat and kWh consumption. Their guaranteed savings percentages are backed by insurance to provide confidence in projected savings.
Catalog Biến tần Frenic Aqua Fuji-Beeteco.comBeeteco
The document discusses Fuji Electric's FRENIC-AQUA series of inverters. It provides high-performance control of pumps and blowers for water and wastewater applications through energy saving functions and dedicated control features. These inverters contribute to cost reduction by optimizing processes and cutting power consumption for water treatment facilities. The inverters have a slim body design and user-friendly interface to allow independent installation and easy operation and maintenance.
EcoTec EcoSBR design, process, performance and treatment values comparison with technologies such as conventional sequence batch reactor, johkasou, MBBR. Comparison is done with 50 KLD sewage treatment plant as example. EocSBR is a sequence batch reactor technology with airlift pumps used for sewage transfer and decantation of clear water.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Elgen Tech - next generation Waste Heat to Power plantRussianCarbonFund
Next generation Waste Heat to Power plant seeks for investment.
About 50% of generated industrial energy is lost via waste heat streams. Our team developed next generation organic Rankine cycle power generation unit which converts 100 – 500 C° temperature heat into electrical energy with record efficiency – 28% and lowest installed costs on the market – 1500 USD per 1 kW. Our team seeks for investment which will be matched by Skolkovo Foundation grant.
Omnik-solar-inverter-manufacturer-catalogOmnik Solar
Omnik New Energy Co., Ltd. is a Sino-German joint venture that specializes in developing, manufacturing, and marketing photovoltaic inverters. The company aims to provide high-efficiency, reliable, and cost-effective solar inverters. Omnik produces single phase and three phase string inverters, as well as hybrid and micro inverters. The document provides details on Omnik's company profile, philosophy, history, product lines, staff, and international marketing network.
Omnik solar inverter manufacturer catalogOmnik Solar
Omnik New Energy Co., Ltd. is a Sino-German joint venture that specializes in developing, manufacturing, and marketing photovoltaic inverters. The company aims to provide high-efficiency, reliable, and cost-effective solar inverters. Omnik produces single phase and three phase string inverters, as well as hybrid and micro inverters. The document provides details on Omnik's company profile, philosophy, history, product lines, staff, and international marketing network.
WTR Tec has developed an electrocoagulation technology to treat and recycle wastewater from metal coating processes. They implemented a system at Galvanomata, a metal coating company, that treats wastewater from rinsing baths in-situ. The system reduces chromium levels from over 3000 ppm to less than 1 ppm, allowing 90% of the water to be recycled back into the rinsing process. The system has a small footprint, uses 40 kW of energy per cubic meter of water treated, and produces a dry sludge that is 85% iron and 15% chromium and can be recycled. WTR Tec's technology optimizes electrocoagulation through statistical and engineering methods
EcoStruxure, IIoT-enabled architecture, delivering value in key segments.Schneider Electric
The document provides an overview of Schneider Electric's value propositions for key segments including water and wastewater, mining and metals, and food and beverage. It discusses the market trends in these industries and highlights how EcoStruxure solutions can help deliver operational excellence, develop the digital supply chain, and empower the next generation workforce. Specific areas that EcoStruxure addresses are highlighted such as smart manufacturing, smart facilities, smart food safety, and smart supply chain optimization. Partnerships and a focus on strategic accounts are emphasized as important for success.
solar inverter, solar lantern, solar light, hybrid inverter, off grid, on grid, net metering, solar refrigerator, solar fridge,, solar pump, solar panel, solar roof top, solar power, solar energy, solar solutions.
Environmental Engineers International is a global environmental consulting firm established in 2001 in Western Australia. They provide consulting, engineering, and management services related to water, energy, resources, land development, and sustainability. Their expertise includes wastewater treatment, waste management, bioenergy, and environmental impact assessment. They have developed innovative technologies like ANRUP, HART, and SSBC to provide cost-effective solutions to clients in industries like meat processing, wineries, and land development.
The ESC (Electro Separation Cell) is a system developed by Ground Effects Clean Mud Solutions Inc. that uses proprietary electrode technology and an applied electric field to remove ultrafine solids smaller than 6 microns from drilling mud. The ESC is a highly effective system that is compact, mobile, and easy to operate. It provides significant cost savings for customers by consistently and reliably removing colloidal solids without using heat, chemicals, or producing waste.
PATENTED AND PROVEN ENERGY OPTIMIZATION SYSTEM WITH 8-12 % IMMEDIATE ENER...Andrew Dmitrev
The transition to a sustainable future starts with energy efficiency. Our product – Smart-Optimizer ECOD – is a proven, patented and scalable system for energy optimization. With a fast payoff time, normally 12-24 months, and electricity savings in the range of 8-12 %; ECOD is a simultaneously profitable and scalable product.
ECOD is keeping the power at the minimum of tolerance range, reduces harmonic distortion, and reduces reactive power. The end-result is an innovative, yet highly effective, system to optimize and save on the electricity consumption.
ECOD’s patented technology – proven effective by numerous successful installations – controls the voltage to the actual loads and keeps the current within optimal range for efficiency. At every moment the network will operate with the smallest possible energy consumption.
BENEFITS FROM ECOD:
Average of 8-12 % savings on the electricity bills
Pro-longs the life-span of electrical equipment
Short payoff period 12-24 months
Scalable and dynamic for property portfolios
Compatible for indoors/outdoors installations
Simple and fast installation
Completely self-sufficient
10-years warranty
Light and small, easy to find room for
Remote monitoring and analysis by app
Overvoltage protection
Bảng giá máy cắt không khí ACB Easypact EVS schneider
Long Nguyễn đại lý phân phối máy cắt không khí Schneider tại Việt Nam
http://longnguyenvn.com/category/acb-evs-schneider
The Austrian market leader for timing and monitoring relays.With a wide range of timing relay products and monitoring devices
Providing high-quality industrial switching devices and power electronics.
Ensures safety and energy efficiency!
We, JIS Electric is the authorized sole distributors and stockiest for Tele Haase products in the Middle East Region, and we can supply any products for any industrial applications.
Contact us for more details,
Call: 04 4277207
Email: info@jiselectric.com
Visit: www.jiselectric.com
Pure Water Group is specialized in High Purity and Ultra Pure Water applications. Since more than 20 years the development of membrane filtration and Electro Deionization systems is our main focus. Based on our knowledge and experience, equipment is manufactured for water system integrators across the world. Our clients implement the equipment in the process and power industry, the pharmaceutical industry and at hemodialysis centers. As Ionpure 'Master Service Provider' we distribute CEDI modules and accessories direct from our European warehouse. The branch and product knowledge enable us to guarantee qualitative high-end solutions which meet your expectations on every level.
Elohim Industrial Sales, Inc. (EISI), an ISO 9001:2008 Certified, Exclusive Distributor of Hager and Euromate in the Philippines.
EISI is a leading Solutions Provider and Systems Integrator of Schneider Electric Automation in the Philippines. EISI also carry the SCHNEIDER ELECTRIC POWER METERS and HARMONICS filter products.
EISI is committed to total quality service. We offer business operations with innovative solutions through conceptualization, design and engineering, project management, testing and implementation, training, calibration and after sales support.
تستخدم هذه الوحدات للمعالجة و التطهير فى تطبيقات مياه الشرب, عمليات إعادة تدوير المياه, صناعات الأغذية و المشروبات, المزارع السمكية و حمامات السباحة و بصفة أشمل تصلح للتطبيقات الصناعية و المختبرات و المحطات التجريبية, تنتج هذه الأنظمة حتى 400 جم/ساعة من الأوزون عالى التركيز بأقل استهلاك للطاقة و الأكسجين نظرا للإنتاجية عالية التركيز
يتم مراقبة و عرض معاملات العملية التشغيلية فى هذه الوحدات بصفة مستمرة لضمان موثوقية سير التشغيل, وتتضمن الوحدة العديد من المكونات الأساسية مثل مولدى غاز الأوزون و الأكسجين, وحدات تحكم كهربائية مرفقة بمبادلات إشارات, الأسلاك و الأنابيب المثبتة على إطار من الإستانليس ستيل و مكونات أخرى إضافية حسب حاجة التشغيل
http://rheoserve.com/index.html#portfolio
(B) pepco energy solutions overview document emailsgraham007
Pepco Solutions specializes in reducing the energy consumption and costs of industrial and commercial facilities through the installation of passive technologies. They can produce average savings of 10-20% on energy bills while electrical loads are in operation, reducing operating costs. Pepco Solutions utilizes proven technologies like motorized liners and lighting controllers to improve power quality and factor, increase electrical system capacity, and reduce unnecessary heat and kWh consumption. Their guaranteed savings percentages are backed by insurance to provide confidence in projected savings.
Catalog Biến tần Frenic Aqua Fuji-Beeteco.comBeeteco
The document discusses Fuji Electric's FRENIC-AQUA series of inverters. It provides high-performance control of pumps and blowers for water and wastewater applications through energy saving functions and dedicated control features. These inverters contribute to cost reduction by optimizing processes and cutting power consumption for water treatment facilities. The inverters have a slim body design and user-friendly interface to allow independent installation and easy operation and maintenance.
EcoTec EcoSBR design, process, performance and treatment values comparison with technologies such as conventional sequence batch reactor, johkasou, MBBR. Comparison is done with 50 KLD sewage treatment plant as example. EocSBR is a sequence batch reactor technology with airlift pumps used for sewage transfer and decantation of clear water.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Elgen Tech - next generation Waste Heat to Power plantRussianCarbonFund
Next generation Waste Heat to Power plant seeks for investment.
About 50% of generated industrial energy is lost via waste heat streams. Our team developed next generation organic Rankine cycle power generation unit which converts 100 – 500 C° temperature heat into electrical energy with record efficiency – 28% and lowest installed costs on the market – 1500 USD per 1 kW. Our team seeks for investment which will be matched by Skolkovo Foundation grant.
Omnik-solar-inverter-manufacturer-catalogOmnik Solar
Omnik New Energy Co., Ltd. is a Sino-German joint venture that specializes in developing, manufacturing, and marketing photovoltaic inverters. The company aims to provide high-efficiency, reliable, and cost-effective solar inverters. Omnik produces single phase and three phase string inverters, as well as hybrid and micro inverters. The document provides details on Omnik's company profile, philosophy, history, product lines, staff, and international marketing network.
Omnik solar inverter manufacturer catalogOmnik Solar
Omnik New Energy Co., Ltd. is a Sino-German joint venture that specializes in developing, manufacturing, and marketing photovoltaic inverters. The company aims to provide high-efficiency, reliable, and cost-effective solar inverters. Omnik produces single phase and three phase string inverters, as well as hybrid and micro inverters. The document provides details on Omnik's company profile, philosophy, history, product lines, staff, and international marketing network.
WTR Tec has developed an electrocoagulation technology to treat and recycle wastewater from metal coating processes. They implemented a system at Galvanomata, a metal coating company, that treats wastewater from rinsing baths in-situ. The system reduces chromium levels from over 3000 ppm to less than 1 ppm, allowing 90% of the water to be recycled back into the rinsing process. The system has a small footprint, uses 40 kW of energy per cubic meter of water treated, and produces a dry sludge that is 85% iron and 15% chromium and can be recycled. WTR Tec's technology optimizes electrocoagulation through statistical and engineering methods
EcoStruxure, IIoT-enabled architecture, delivering value in key segments.Schneider Electric
The document provides an overview of Schneider Electric's value propositions for key segments including water and wastewater, mining and metals, and food and beverage. It discusses the market trends in these industries and highlights how EcoStruxure solutions can help deliver operational excellence, develop the digital supply chain, and empower the next generation workforce. Specific areas that EcoStruxure addresses are highlighted such as smart manufacturing, smart facilities, smart food safety, and smart supply chain optimization. Partnerships and a focus on strategic accounts are emphasized as important for success.
solar inverter, solar lantern, solar light, hybrid inverter, off grid, on grid, net metering, solar refrigerator, solar fridge,, solar pump, solar panel, solar roof top, solar power, solar energy, solar solutions.
Environmental Engineers International is a global environmental consulting firm established in 2001 in Western Australia. They provide consulting, engineering, and management services related to water, energy, resources, land development, and sustainability. Their expertise includes wastewater treatment, waste management, bioenergy, and environmental impact assessment. They have developed innovative technologies like ANRUP, HART, and SSBC to provide cost-effective solutions to clients in industries like meat processing, wineries, and land development.
Similar to GEE Water Treatment brochure final2 (20)
2. “We are leaders in advanced
wastewater
treatment
technologyusing electrocoagulation.”
Sean Frisky, Founder and CEO
Ground Effects Energy Inc.
3. Company
Profile
Ground Effects Energy (GEE) leads the way by offering the most effective wastewater
treatment process available in the world. Exceeding the ever-changing needs of the oil and gas,
mining, and manufacturing industries since 1998, Ground Effects Energy is shaping the direction of
wastewater treatment through leading edge technology.
We are a dedicated technology manufacturer that provides specialized products for innovative and
effective wastewater treatment.
4. our approach
Our commitment is to be a global provider of innovative, high performance wastewater treatment
technologies backed up by world-class training and technical support that exceeds our clients’ needs.
We are currently looking to work with strategic partners globally to be service providers. Our
partnership approach is to bring together senior leadership teams with the experience and depth for
both strategic vision and strong day-to-day operations.
5. Buy one.
Buy all four.
Buy individual components or the entire integrated package
We can manufacture any of the four individual components of our Wastewater Treatment Technology
or the entire integrated pre-packaged ElectroPure Technology (EPT). It’s your choice. Each component
can be integrated into your existing wastewater process easily depending on what you need.
The complete pre-packaged integrated system has a compact footprint and is easily deployed or
incorporated into your existing system or process. The following four components make up the EPT.
1. Electrocoagulation Unit
2. Advanced Oxidation Process
3. Dissolved Gas Flotation Unit
4. Filtration Unit
Electrocoagulation Unit
Dissolved Gas Flotation Unit
Advanced Oxidation Process
Filtration Unit
6. The Science
Behind the Ept
The ept works on the principle of electrokinetics.
Via proprietary coated electrodes, the EPT applies a high current electrical field to the wastewater.
The electrical field destabilizes the molecular bonds between the waste and the water. Through the
destabilization process, the waste separates from the water and is skimmed off, leaving the clean
water. The process does not use heat or chemicals and has very low energy use.
Variable Cell Configuration (VCC) allows
changes such as electrode material and
thickness, total surface area, electrical
current density, and electrode gap thickness,
which allow system optimization and
adaptability. Advanced oxidation processes
(AOP) like electro catalytic oxidation, ozone,
and hydrogen peroxide can be incorporated
for a combined and more powerful effect on
hard-to-treat wastewater.
anode (+) cathode (-)
ph gradient (acidic) ph gradient (alkaline)
dissolution
hydrolysation
coagulation
flocculation
flotation
7. industries
we serve
No matter the industry. We have the solution.
The EPT can be used to treat a variety of produced water for any industry that requires
reliable and effective wastewater treatment , including oil gas, industrial, mining,
and agriculture. The EPT uses high current densities which means it can remove difficult
contaminants, like H2
S. The unit is installed on a compact, portable skid for easy set up.
The EPT is:
• Designed with a small footprint for minimal space usage
• Highly mobile and rugged
• Easy to install and operate
• Certified DNV 2.7.1 – with crash frame option available
• UL, CSA, ATEX, IECEx, Class 1, Zone 1 certified
8. easy
operation
The control panel is designed for ease of operation.
The EPT system has few moving parts and is highly automated, which reduces training,
downtime, maintenance, and operating costs.
The EPT’s Human-Machine Interface (HMI) is intuitive and loaded with system information for
‘just in time’ learning and can be remotely monitored by the customer and supported by GEE.
A mobile app is now available for all smartphones, including Android. For safety, all systems are
pre-wired for all appropriate safety shutdowns for the oil and gas industry specifications.
9. System Characteristics
Certified explosion proof for hazardous environments like oil gas industry•
More power to treat complex and hard-to-treat wastewater when combined with advanced•
oxidative processes (AOP) like electrochemical oxidation, ozone, hydrogen peroxide.
Innovative bus bar design allows delivery of very high current densities but is also easy to•
replace electrode cells
Electrodes: Proprietary Coated Electrodes
Safety: Lid open shut off
Low cell pressure shut off safety switch
High tank level shut off
Low oil level shut off
High oil temperature shut off
DC Rectifier
Phase loss
Thermal
Over voltage trip
Over current trip
Cleared fuse
Excessive program voltage
Run dry protection
High pressure shutdown
Technical specs
EPT XP series
EPT H2S series
Model Height Width Length Weight Capacity
XP 600 9’6” 8’ 50’ 59,000 lbs 600 gpm
XP 450 9’6” 8” 50’ 48,000 lbs 450 gpm
XP 300 9’6” 8” 40” 39,000 lbs 300 gpm
XP 100 9’6” 8” 20” 29,000 lbs 100 gpm
XP 50 9’6” 8” 10” 21,000 lbs 50 gpm
Model Height Width Length Weight Capacity
H2S 600 9’6” 8’ 50’ 26,000 lbs 600 gpm
H2S 450 9’6” 8” 50’ 21,000 lbs 450 gpm
H2S 300 9’6” 8” 40” 16,000 lbs 300 gpm
H2S 100 9’6” 8” 20” 9,000 lbs 100 gpm
H2S 50 9’6” 8” 10” 8,000 lbs 50 gpm
10. diagnostics
Trouble shooting before trouble begins.
The EPT has an integrated 24-hour diagnostics program that
provides the operator with critical status information that can
be accessed online or from our proprietary smartphone app.
Real-time trends of main data can be seen at any time, from
anywhere around the world. Continuous monitoring ensures a
consistent and reliable runtime and advanced troubleshooting
access and control.
Ept Advantages
• Effective treatment of hard-to-treat wastewater
• Low operating costs: Non-sacrificial electrodes with proprietary coating
• Compact footprint
• Easy one-man operation
• Mobile
• Two-stage, variable cell configuration (VCC) allows optimization and adaptability of the system
• Accelerated electrochemical reactions resulting in small overall footprint
• Simple to operate and highly automated
• Generates less sludge than chemical flocculation and doesn’t add unnecessary anions
• Low energy usage
• Consistent and reliable
• Easy to use: Integrated pumps built into skid
• Low Maintenance
Options
• Integrated air compressor
• Electrical configurations: 380/460/575 VAC – 50/60 Hz
• Class 1, Zone 1
• IECEX
, UL, CSA, CE/ATEX certification
• Full electric drive
• Controls/compressor/N2/HYD Pack – containerized in NEMA 3R or purged DNV.2.7.1 rated container
• Remote telemetry
• DNV.2.7.1 rated skid or crash frame
11. For more information about the EPT,
or for wastewater partnership opportunities, please contact:
Ground Effects Energy
Box 1605
2251 Industrial Drive
Regina, Saskatchewan, Canada
S4P 3C4
Tel: +1 306 352 1400
Email: gee@groundeffects.org
www.GroundEffectsEnergy.com
GROUND EFFECTS
ENERGY INC.