This document provides information on various automation equipment solutions for LCD, TP, FPD and other industrial automation industries. It lists several pieces of equipment for processes such as laminating, bonding, assembly, and testing. The equipment listed include laminators, polarizer laminators, bonding machines, assembly machines, and backlight film laminating machines. For each piece of equipment, the document provides information on its usage, product dimensions, accuracy, capacity, dimensions, and processes.
Constellium has unveiled a sustainability roadmap that will guide the Company’s broad range of sustainability initiatives, including active energy saving and recycling programs. The roadmap formalizes and defines the company’s long-standing commitment to sustainability and sets ambitious goals and targets to enhance the sustainability of Constellium’s operations and business practices. The roadmap defines four main priorities of the Company’s sustainability efforts:
- reaching the highest standards of safety and skill development of Constellium employees;
- ensuring the highest level of transparency with respect to Constellium’s governance and its partnerships throughout the supply chain including suppliers, customers and other stakeholders;
- minimizing the environmental impact of the company’s operations; and
- designing, developing and manufacturing sustainable products based on a thorough life cycle analysis that increases, in particular, resource efficiency across the value chain.
Constellium has defined a comprehensive set of targets for each of these priorities, including:
- a further drop in the number of accidents, with a target of zero serious injury incidents in 2015 and a 60% reduction in recordable cases in 2014 versus 2010;
- a continued increase in energy efficiency (10% improvement from 2010 to 2015); and
- a systematic usage of Life Cycle Assessments in the company’s innovation projects.
Constellium has unveiled a sustainability roadmap that will guide the Company’s broad range of sustainability initiatives, including active energy saving and recycling programs. The roadmap formalizes and defines the company’s long-standing commitment to sustainability and sets ambitious goals and targets to enhance the sustainability of Constellium’s operations and business practices. The roadmap defines four main priorities of the Company’s sustainability efforts:
- reaching the highest standards of safety and skill development of Constellium employees;
- ensuring the highest level of transparency with respect to Constellium’s governance and its partnerships throughout the supply chain including suppliers, customers and other stakeholders;
- minimizing the environmental impact of the company’s operations; and
- designing, developing and manufacturing sustainable products based on a thorough life cycle analysis that increases, in particular, resource efficiency across the value chain.
Constellium has defined a comprehensive set of targets for each of these priorities, including:
- a further drop in the number of accidents, with a target of zero serious injury incidents in 2015 and a 60% reduction in recordable cases in 2014 versus 2010;
- a continued increase in energy efficiency (10% improvement from 2010 to 2015); and
- a systematic usage of Life Cycle Assessments in the company’s innovation projects.
Automotive NVH (in co-operation with Bentley Motors Limited)Torben Haagh
VISIT THE CONFERENCE WEBSITE HERE - http://bit.ly/NVH_Slideshare_Website
With contributions from 10 international OEM companies!
The advent of electrical, electronic and mechatronic fields have demonstrated the potential of not just reducing noise and vibration in vehicle using active technologies, but has also generated the scope of introducing sounds and vibrations that could drive positive emotional response. This is a major requirement for high performance cars and is also growing its importance in the field of mass-produced vehicles.
This conference will seek to explore the latest challenges in this area and unique solutions that industry leaders are employing to move things forward.
We hope that you can join us in Crewe, the home of Bentley Motors Limited and help us make this event successful and regular in the automotive NVH calendar.
• Explore advanced passive and active NVH control-solutions, to save weight and
costs while optimising CO2 efficiency and passenger comfort
• Gain insight into advanced measuring, testing and simulation tools in a
virtual reality context for definition and development of integrated solutions that
meet passengers´perception and needs
• Explore psychoacoustics, sound branding and personalised acoustic options to
differentiate from competitors and ensure a unique acoustic driving experience
• Hear about advanced technologies and sound synthesis for Noise Optimisation
in EV/HEVs and high performance cars
• Find out about powertrain and vehicle refinement with smart materials and
innovative measuring systems that ensure low cost
Deep analysis of the 400Gb optical transceiver from a leading Chinese company.
More information: https://www.systemplus.fr/reverse-costing-reports/innolights-400g-qsfp-dd-optical-transceiver/
Vibro Equipments India, are engaged in the manufacture, export and supply of a wide range of hi-tech finishing machines such as Vibratory Finishing Machine, Centrifugal Planetary Finishing Machine, Screening Machine with Essential Technology, Mass Finishing System, etc.
Get more details visit us : http://www.vibrogroup.com/
Grain Storage Silos and Handling Equipments Producer
Grain Storage Silos, Feed Silos and Equipments, Grain Conditioning, Grain Handling Equipments, Catwalks and Support Towers, Grain Cleaning Systems, Control Panels and Automation Systems
JDR is a leading provider of custom-designed and manufactured subsea power cables, umbilical systems and reeler packages for a broad range of applications.
JDR's significant portfolio of product design, manufacture and delivery extends throughout the oil and gas sector and the offshore renewables market. JDR's subsea wellhead, production and workover umbilicals are installed and used around the world, with turnkey systems and reeler packages engineered and manufactured to exacting standards for operation in the most challenging of environments.
An accomplished track record of meeting client expectations and a commitment to lifecycle customer service makes JDR the offshore energy industry's global Partner of Choice.
IQRA Portable Systems, are efficiently meeting the needs of our clients. We commenced our operations with an objective to supply quality Portable Cabin at the most competitive prices. Our complete array comprises Bunk House, Factory Shed, Mobile Toilet, Portable Cabin, Security Cabin, Toll Booth, Portable Security Cabin, Porta Security Cabin and more.
Get more details visit us : http://www.iqraportablecabin.com/
KING-METER founded in 2004 is a professional enterprise, specialized in R&D, production and sales of displays, sensor and rental system for public E-bikes.
KING-METER is national grade High-tech enterprise. We own 96 patents and get many design awards. All the products are exported to Europe and own35% market share in Europe. All products have passed EN15194, CE, RoHs and REACH.
Machine range: We are a one-stop SMT solution company, providing all SMT production, inspection and rework machines, spare-parts, consumables etc. All main-line manufacturing production equipment like wave solder, reflow ovens, printers, p&p, PCB conveyors/handling, AOI, SPI, Conformal coating, dispensing, selective soldering, PCBA cleaner etc. Replacement parts like conveyor fingers for different wave solder systems, p&p feeders and nozzles etc, consumable material like glues, solder wire etc. This will save customers a significant amount of time. Three different suppliers for one single item would be compared, as opposed to capitalizing on the mass investigation into the market completed before we present our machines and recommend to our customers.50% cost saving for your current purchasing .If you have any need.please feel free to contact me .email:shaoyong@smthelp.com whatsapp:+86 13760481664 Skype:sy332366
Labor costs are getting higher and higher;
General labor force continued to decline;
Lack of skilled workers, training costs have been rising;
Quality is not stable and consistent;
The problems of capacity and reliability;
Take up a lot of production space ...etc.
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
Automotive NVH (in co-operation with Bentley Motors Limited)Torben Haagh
VISIT THE CONFERENCE WEBSITE HERE - http://bit.ly/NVH_Slideshare_Website
With contributions from 10 international OEM companies!
The advent of electrical, electronic and mechatronic fields have demonstrated the potential of not just reducing noise and vibration in vehicle using active technologies, but has also generated the scope of introducing sounds and vibrations that could drive positive emotional response. This is a major requirement for high performance cars and is also growing its importance in the field of mass-produced vehicles.
This conference will seek to explore the latest challenges in this area and unique solutions that industry leaders are employing to move things forward.
We hope that you can join us in Crewe, the home of Bentley Motors Limited and help us make this event successful and regular in the automotive NVH calendar.
• Explore advanced passive and active NVH control-solutions, to save weight and
costs while optimising CO2 efficiency and passenger comfort
• Gain insight into advanced measuring, testing and simulation tools in a
virtual reality context for definition and development of integrated solutions that
meet passengers´perception and needs
• Explore psychoacoustics, sound branding and personalised acoustic options to
differentiate from competitors and ensure a unique acoustic driving experience
• Hear about advanced technologies and sound synthesis for Noise Optimisation
in EV/HEVs and high performance cars
• Find out about powertrain and vehicle refinement with smart materials and
innovative measuring systems that ensure low cost
Deep analysis of the 400Gb optical transceiver from a leading Chinese company.
More information: https://www.systemplus.fr/reverse-costing-reports/innolights-400g-qsfp-dd-optical-transceiver/
Vibro Equipments India, are engaged in the manufacture, export and supply of a wide range of hi-tech finishing machines such as Vibratory Finishing Machine, Centrifugal Planetary Finishing Machine, Screening Machine with Essential Technology, Mass Finishing System, etc.
Get more details visit us : http://www.vibrogroup.com/
Grain Storage Silos and Handling Equipments Producer
Grain Storage Silos, Feed Silos and Equipments, Grain Conditioning, Grain Handling Equipments, Catwalks and Support Towers, Grain Cleaning Systems, Control Panels and Automation Systems
JDR is a leading provider of custom-designed and manufactured subsea power cables, umbilical systems and reeler packages for a broad range of applications.
JDR's significant portfolio of product design, manufacture and delivery extends throughout the oil and gas sector and the offshore renewables market. JDR's subsea wellhead, production and workover umbilicals are installed and used around the world, with turnkey systems and reeler packages engineered and manufactured to exacting standards for operation in the most challenging of environments.
An accomplished track record of meeting client expectations and a commitment to lifecycle customer service makes JDR the offshore energy industry's global Partner of Choice.
IQRA Portable Systems, are efficiently meeting the needs of our clients. We commenced our operations with an objective to supply quality Portable Cabin at the most competitive prices. Our complete array comprises Bunk House, Factory Shed, Mobile Toilet, Portable Cabin, Security Cabin, Toll Booth, Portable Security Cabin, Porta Security Cabin and more.
Get more details visit us : http://www.iqraportablecabin.com/
KING-METER founded in 2004 is a professional enterprise, specialized in R&D, production and sales of displays, sensor and rental system for public E-bikes.
KING-METER is national grade High-tech enterprise. We own 96 patents and get many design awards. All the products are exported to Europe and own35% market share in Europe. All products have passed EN15194, CE, RoHs and REACH.
Machine range: We are a one-stop SMT solution company, providing all SMT production, inspection and rework machines, spare-parts, consumables etc. All main-line manufacturing production equipment like wave solder, reflow ovens, printers, p&p, PCB conveyors/handling, AOI, SPI, Conformal coating, dispensing, selective soldering, PCBA cleaner etc. Replacement parts like conveyor fingers for different wave solder systems, p&p feeders and nozzles etc, consumable material like glues, solder wire etc. This will save customers a significant amount of time. Three different suppliers for one single item would be compared, as opposed to capitalizing on the mass investigation into the market completed before we present our machines and recommend to our customers.50% cost saving for your current purchasing .If you have any need.please feel free to contact me .email:shaoyong@smthelp.com whatsapp:+86 13760481664 Skype:sy332366
Labor costs are getting higher and higher;
General labor force continued to decline;
Lack of skilled workers, training costs have been rising;
Quality is not stable and consistent;
The problems of capacity and reliability;
Take up a lot of production space ...etc.
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
Cm602 pick and place machine introductionLucy Xiao
pick and place,pick and place machine,smt line,smt pick and place machine,smt equipment,pick n place,chip shooter,smd line,smt assembly line,pcb pick and place,pnp machine,mydata pick and place,fuji smt machine,pick n place machine,best pick and place machine,yamaha smt machines,panasonic smt machine,pcb pick and place machine,smt placement machine,smd mounting machine,desktop smt pick and place machine,samsung pick and place machine,smd equipment,panasonic pick and place,siemens smt machine,smd placer,pick and place equipment,smd led pick and place machine,led pick and place,smd placement,pcb mounting machine,chip shooter machine,fuji smt pick and place machine,universal smt machines,smt chip mounter,smt pick and place equipment,smd component mounting machine,smt mounter machine
ETA provide professional solution of SMT and SMT peripheral equipment.
Main euqipment include Reflow Oven, SMT Printer, AOI, Loader and Conveyor etc.
More detail plz contact us directly.
email : eta2@eta-ele.com
whatsapp/skype/wechat:+86 138 2653 4318
Cm602 pick and place machine introductionCarrie Zhang
The automatic placement machine is a device used to realize high-speed and high-precision automatic placement of components. It is the most critical and complex device in the entire SMT production. The placement machine has developed from an early low-speed mechanical placement machine to a high-speed optical centering placement machine, and has developed into a multi-functional, flexible connection and modularization.
Mounter: also known as "Surface Mount System", "Surface Mount System", in the production line, it is configured in the dispenser or screen printing machine, is by moving the Mount head Surface Mount components accurately placed on the PCB solder pad. Divided into manual and automatic two.
Automatic SMT mounter is used to realize high speed, high precision and automatic placement of components, is the most critical and complex equipment in the entire SMT production. SMT mounter is the main equipment in the SMT production line. The mounter has developed from the early low-speed mechanical mounter to the high-speed optical mounter, and to the multi-function, flexible connection modular development.
This SMT line can pick & place LED light and LED drive, if you want to build new LED Light and tube factory, please contact me to get good SMT line solutions. My Email address: angela_kuo@126.com or angelaguo1688@gmail.com Or Skype ID: angela7140.
ETA PCBA Coating Line Solution
More Information Plz Contact at smt6@smt11.com
Mobile : +8613828802354 (WhatsApp / Skype / Wechat)
Website: www.smt11.com
This is an overview of Gigalight's products and solutions. Gigalgiht provides customized passive optical components for both metro area network and 5G wireless optical transport network applications.
providing LED SMT total solutions, Auto Insertion machine and service support. Now we are working with Mr Supasak to handle one PIN auto insertion solutions.
Similar to Future Industrial Equipments profile-Partial (20)
1.
1 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Future Industrial,
Liande Shenzhen
Machine Catalog
2.
Provide sets s
non‐standard
FPD products
Automati
Automati
Automati
Non-stan
Professio
• LPL-070
Usage: a
Product D
Accuracy
Capacity:
Outline D
Process:
Panel loa
POL load
• LPL-050
Usage: ap
Product D
Accuracy
Capacity:
Outline D
Process:
Panel loa
POL load
• LCOG-0
Usage: It’s
app
Product D
Accuracy
Capacity:
Outline D
Process:
Panel loa
contrapos
• FLOG-0
Usage: it’
(1
Product D
Main Bu
solutions of autom
d automation equ
s & other industria
ion equipments
ion equipments
ion production
ndard automati
onal autom
02A Automati
pplicable to lami
Dimension: 1~5”
y: ±0.1 mm
: 900pcs/h
Dimension *4 (m
ding contrapos
ing film removi
00S Semiauto
plicable to lamin
Dimension: 1~5”
y: ±0.1 mm
: 900pcs/h
Dimension (mm)
ding contrapos
ing film removi
0500S COG B
s a semiautomati
plicable to bond
Dimension: 1~5
y: Pre-bonding±
: 650pcs/h
Dimension (mm)
ading mechanic
sition automatica
0502S FOG Bo
’s a semiautoma
1”~5.3”) bond wit
Dimension: 1~5
usiness Sc
mation equipment
ipment etc for LCD
al automation ind
s for FPD, LCD
s for TP
line & logistics
on customized
mation equ
ic Polarizer L
nation between p
”
mm):1650X800X1
sition cleaning
ng correction
omatic Polari
ation between pa
”
):1150X800X170
sition cleaning
ng correction
Bonding Mach
c bonding mach
IC on LCD lamin
.3”
2.5µm, final bond
):2760X1200X18
cal contraposition
ally and correctio
onding Mach
tic FOG bonding
th LCD/TP
.3”
cope
t,
D, TP,
ustry
D/LCM
s line,
d equipment & f
uipments f
Laminator
panel etc and PO
750 (exclude FF
zer Laminato
anel etc and PO
0 (including FFU
hine
ine with pre-bond
nated with ACF
ding±4µm
00
n IC loading aut
n pre-bonding
ine
g machine, applic
Laminat
Lamina
2 / 16
fixture
for LCD/F
OL;
FU)
or
L;
U)
ding & final bond
tomatically CCD
final bonding
cable to FPC
ting and unloadin
ting and unloadin
PD
ding function,
D
unloading autom
ng
ng
matically
3.
Provide sets s
non‐standard
FPD products
Accuracy
Capacity:
Outline D
Process:
Loading a
loading
• LGP-050
Usage: ap
Product D
Accuracy
Capacity:
Outline D
Process:
Panel con
• LGP-050
Usage: ap
Product D
Accuracy
Capacity:
Outline D
Process:
Panel con
• LAL-070
Usage: it
it
Product D
Accuracy
Capacity:
Outline D
Process:
Loading m
• LAL-130
Usage: it c
als
Product D
solutions of autom
d automation equ
s & other industria
y: X:±0.01 mm Y
: 1000pcs/h
Dimension (mm)
automatically(con
FPC&PANEL co
00A Automat
plicable to LCD a
Dimension: 1.5~
y: ±0.075 mm
: 900pcs/h
Dimension (mm)
nveyer loading c
B
01A Automat
plicable to LCD a
Dimension: 2.8~
y: ±0.075 mm
: 1000pcs/h
Dimension (mm)
nveyer loading e
00F ACF Lam
put ACF laminat
can also put AC
Dimension: spec
with
y: X:±0.15 mm Y
: 700pcs/h
Dimension (mm)
manually vacuu
00L ACF Lam
can put ACF lami
o put ACF lamin
Dimension: pane
mation equipment
ipment etc for LCD
al automation ind
Y: ±0.01 mm
):2800X1320X18
nveyer) mecha
ontraposition by m
tic Assembly
and BLU assemb
~5”
):2300X1300X22
contraposition f
BLU loading co
tic Assembly
and BLU assemb
~5”
):2500X1550X22
early contraposit
BLU loading e
minator
te on Panel and
F laminate on FP
cially applied to A
h size less than 7
Y: ±0.1 mm
):700X7000X140
um suction star
minator
inate on Panel an
ate on FPC and
el less than 13”
Contrapo
Contrapo
t,
D, TP,
ustry
00
nical contraposit
manually FPC p
Machine
bly
50
film removing C
ntraposition C
Machine
bly
50
tion film removi
arly contrapositio
Film, with specia
PC and PCB
ACF lamination o
7”, max laminatin
0
rt laminating
nd Film, with spe
PCB, it can also
sition laminating
osition laminating
3 / 16
ion ACF lamina
pre-bonding FP
CCD image capt
CD image captu
ng CCD image
on CCD image
al position fixture
on Touch Panel p
g length is 100 m
unloading
ecial position fixtu
be multi-segme
and unloading
g and unloading
ating automatica
PC final bonding
ture
re
e capture
e capture
,
product
mm
ure, it can
nt laminated
lly inspecting a
unloading auto
automatically FP
omatically
PC
4.
4 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Accuracy: X:±0.2 mm Y: ±0.2 mm
Capacity: 600pcs/h
Outline Dimension (mm):820X820X1500
Process:
Loading manually vacuum suction start laminating unloading
• LHS-0725G Heat Bonding Machine
Usage: applicable to hot bond panel with FPC, TAB
Product Dimension: less than 7”
Accuracy: X:±0.015 mm Y: ±0.015mm
Capacity: 400pcs/h
Outline Dimension (mm):900X750X1400
Process:
Panel loading vacuum suction FPC loading vacuum suction
contraposition adjustment start hot bonding unloading
• LHS-1031L Heat Bonding Machine
Usage: applicable to hot bond panel with FPC, TAB etc, it can be multi-segment
laminated with pre-bonding function
Product Dimension: panel less than 10.4”
Accuracy: X:±0.015 mm Y: ±0.015mm
Capacity: 320pcs/h (contraposition time is 3s)
Outline Dimension (mm):1200X1040X1610
Process:
Panel loading vacuum suction FPC loading vacuum suction pre-bonding
displacement FPC loading vacuum suction pre-bonding……displacement final
bonding return unloading
• LHS-1511F FOG Heat Bonding Machine
Usage: applicable to final bond between pre-bonded panel & FPC
Product Dimension: panel less than 16”
Accuracy: X:±0.01mm Y: ±0.01 mm
Capacity: 200pcs/h (bonding time is 8 seconds)
Outline Dimension (mm):1000X1120X1500
Process:
Panel loading vacuum suction displacement final bonding return unloading
LHS-151AF FOB Heat Bonding Machine
Usage: applicable to bonding between PCB and FPC with ACF as media
Product Dimension: panel less than 16”
Accuracy: X:±0.015mm Y: ±0.015 mm
Capacity: 200pcs/h (bonding time is 8 s)
Outline Dimension (mm):1000X1120X1500
5.
5 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Process:
Panel loading vacuum suction PCB loading vacuum suction
contraposition & adjustment hot bonding return unloading
• LHS-1231L Heat Bonding Machine
Usage: with pre-bonding & multi-segment FPC main bonding function, Applicable to
FPC to PCB and FPC to glass’s contraposition, pre-bonding and final bonding.
Product Dimension: panel product less than 12.1”
Accuracy: X:±0.015 mm Y: ±0.015mm
Capacity: 70pcs/h (as example of 3 piece of FPC’s contraposition & pre-bonding,
3 times pre-bonding, 1 time final bonding)
Outline Dimension (mm):1700X985X2211 (including FFU)
Process:
Panel loading vacuum suction FPC loading vacuum suction contraposition &
adjustment pre-bonding displacement FPC loading vacuum suction contraposition
& adjustment pre-bonding……displacement final bonding return unloading
• LBZD-5 Backlight Film Laminating Machine
Usage: applicable to automatic combination backlight multi-ties of polarizer
in display module
Product Dimension: 2.0”~5.0”
Accuracy:±0.1 mm
Capacity: 1000pcs/h
Outline Dimension (mm):2800X1920X2200
Process:
Put in backlight plastic box artificially, the equipment will assemble diffuser, down prism
sheet, up prism sheet and shading film automatically, conveyer unloading automatically.
•
Automation equipments for TP
• LFOG-0530S Semiautomatic FOG Connection Machine
Usage: applicable to double-side FPC hot bonding of DITO CTP
Product Dimension: 1.5”~5.3”
Accuracy: X:±0.015 mm Y: ±0.015mm
Capacity: 450pcs/h
Outline Dimension (mm): 6400X1280X1860
Process:
Loading automatically(loader) optional unit mechanical
contraposition ACF laminating automatically inspecting
automatically FPC loading & contraposition manually
FPC pre-bonding final bonding panel turning mechanical
6.
Provide sets s
non‐standard
FPD products
contrapos
automatic
final bo
• LFOG-0
Usage: a
Product D
Accuracy
Capacity:
Outline D
Process:
Loading m
inspecting
adjustme
final bond
turning 60
• LFOG-0
Usage: ap
pro
Product D
Accuracy
Capacity:
Outline D
Process:
Loading a
laminatin
FPC co
unloading
• LOL-120
Usage: a
Product D
Accuracy
Capacity:
Outline D
Process:
SG/CG lo
OCA lo
solutions of autom
d automation equ
s & other industria
Laminating
sition ACF lam
cally FPC turnin
onding unloadin
0500R Automa
pplicable to G+F
Dimension: 1.5”~
y: X:±0.02 mm
: 600pcs/h
Dimension (mm)
manually turnta
g automatically
nt automatically,
ding automaticall
00
unloading au
0702A OGS A
plicable to FPC h
ocessing of OGS
Dimension: 2.5”~
y: X:±0.01 mm
: 600pcs/h
Dimension (mm)
automatically (Co
ng automatically
ontraposition aut
g automatically
00S Flex to R
pplicable to OCA
Dimension: 4.3~
y: ±0.1 mm
: 150pcs/h
Dimension (mm)
oading manually
oading automatic
mation equipment
ipment etc for LCD
al automation ind
g and unloading
minating automat
ng automatically
ng automatically (
atic G+F+F F
F+F FPC bonding
~5.3”
Y: ±0.02mm
): 2800X1840X18
able turning 600
turntable turnin
FPC pre-bondin
y 1 turntable tu
utomatically by ro
utomatic Bon
hot bonding on O
S (panel) industry
~7”
Y: ±0.01mm
): 4650X1380X18
onveyer) mecha
inspecting auto
tomatically FPC
Rigid Laminat
A laminate on SG
~12”
):1630X1390X22
film removing m
cally film remov
t,
D, TP,
ustry
tically inspectin
FPC pre-bondi
(unloader) option
OG Bonding
g in ACF process
800
ACF laminating
ng 600
CCD co
ng automatically
urning 600
fina
obot
nding Machin
OGS or panel pro
y
800
anical contrapos
omatically FPC
C pre-bonding
tor
G or CG (adapt sc
00
manually cleani
ving automatically
6 / 16
ng
ing
nal unit
Machine
sing of CTP pane
g automatically
ontraposition &
turntable turnin
al bonding 2 tu
ne
oducts in ACF
ition ACF
C loading manua
final bonding
creen laminating
ng CCD imagi
y CCD imaging
el
ng 600
urntable
ally
g)
ng
g
7.
Provide sets s
non‐standard
FPD products
Co
la
• LOCA-1
Usage: ap
Product D
Accuracy
Capacity:
Outline D
Process:
SG/TP loa
CG/LCM
• LOCR-0
Usage: a
p
Product D
Accuracy
Capacity:
Outline D
Process:
Big piece
Small piec
• LOCR-1
Usage: ap
Product D
Accuracy:
Capacity:
Outline Di
Process:
1. put
va
2. put
3. lam
4. lam
5. Lev
solutions of autom
d automation equ
s & other industria
Contraposition
vacuum cham
breaking vacuum
ontraposition & a
aminating UV p
200S Rigid to
plicable to lamin
Dimension: 4.3~
y: ±0.1 mm
: 150pcs/h
Dimension (mm)
ading manually
loading manually
0500B Automa
pplicable to put s
rocess (water glu
Dimension: 3~5”
y: ±0.03 mm
: 80pcs/h
Dimension (mm)
of glass loading
ce of glass loadin
101S UV Glu
plicable to TP UV
Dimension: 2~1
: ±0.15 mm
90Pcs/h (based
mension(mm)
CG on the board
acuum, start to d
ITO glass in spe
minating platform
mination platform
veled fixture put i
mation equipment
ipment etc for LCD
al automation ind
& adjustment
ber vacuum s
m opening vacu
adjustment autom
pre-solidifying u
o Rigid Autom
ate TP with LCM
~12”
):1400X1600X230
film removing m
y film removing
atic UV Glue
small glass lamin
ue as media)
”
):1500X1200X200
manually CCD
ng manually dis
ue Laminator
V glue process la
1”
d on 7” product)
:4000Х1200Х1
d up flipping plat
dispense, flip the
ecial fixture and t
support the fixtu
declining, fixture
nto UV oven afte
t,
D, TP,
ustry
automatically
suction laminat
uum return loa
matically
unloading
matic Vacuum
M or SG with CG
00
manually CCD i
manually CCD
Laminator (L
nate with big glas
00
D imaging
spensing turnin
(LOCA Lamin
amination (cover
1600 (exclude FF
form, PIN contra
platform after dis
transmit to lamin
re to lamination
e flowing into IR h
er pre-inspection
7 / 16
close
ting
ading
m Laminator
(OCA as media)
maging
D imaging
LOCA Lamina
ss in OGS
ng CCD imaging
nator)
r glass+ ITO glas
FU)
aposition, press to
spensing.
ating position wit
position to comp
high speed strea
for pre-solidifyin
ator)
g
ss)
o start
th conveyer.
plete lamination
m open hearth w
ng, unloading.
with belt line.
8.
Provide sets s
non‐standard
FPD products
6. Rep
• LVLM-0
Usage: ap
Product D
Accuracy
Capacity:
Outline D
Process:
SG feedin
chamber
• LFL-050
Usage: a
Product D
Accuracy
Capacity:
Outline D
Process:
Film feedi
Glass feed
adjustmen
• LFL-100
Usage: a
F
Product D
Accuracy
Capacity:
Outline D
Process:
Film feedi
Glass feed
CCD imag
solutions of autom
d automation equ
s & other industria
peat step from 1~
503R Hard to
plicable to TP OC
Dimension: 2~7”
y: ±0.10 mm
: 400Pcs/h
Dimension(mm):
ng manually CG
vacuum suction
00S Soft to Ha
pplicable to lami
Dimension: 2~5
y: ±0.1 mm
: 240Pcs/h
Dimension(mm):
ng manually film
ding manually
nt automatically
02S Soft Film
pplicable to lami
(Film) process
Dimension: 2.8~
y: ±0.1 mm
: 180Pcs/h
Dimension(mm):
ng manually film
ding manually
ging and adjustm
mation equipment
ipment etc for LCD
al automation ind
~5 for massive p
o Hard Vacuu
CA process lami
1140Х900Х170
G feeding manua
n laminating b
ard Laminato
nate Film on CG
5”
1000Х750Х160
m removing man
film removing m
laminating ret
Laminator
nate OCA or film
~10.4”
1450Х820Х180
m removing man
film removing m
ment laminating
t,
D, TP,
ustry
production.
m Laminator
nation(cover glas
00
ally start turnin
break vacuum r
or
G (Cover Glass) in
00
nually, cleaning
manually, cleaning
turn unloading
m on CG (Cover G
00
nually, cleaning
manually, cleaning
return unload
8 / 16
r
ss+ ITO glass)
ng close vacuu
return unloading
n G(Glass)+ F(F
CCD imaging
g CCD imagin
Glass) in G (Glas
g
ding
um
g
ilm) process
ng
ss) +
9.
9 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
• LAL-0701F ACF Laminator
Usage: applicable to laminate ACF on panel
Product Dimension: panel below 7”
Accuracy: X: ±0.5 mm Y: ±0.1 mm
Capacity: 700Pcs/h
Outline Dimension(mm): 730Х680Х1450
Process:
Feeding manually vacuum suction start laminating unloading
• LAL-1300L ACF Laminator
Usage: applicable to laminate ACF on panel
Product Dimension: panel below 13”
Accuracy: X: ±0.2 mm Y: ±0.2 mm
Capacity: 600Pcs/h
Outline Dimension(mm): 820Х820Х1500
Process:
Feeding manually vacuum suction start laminating unloading
• LHS-0721F Heat Bonding Machine
Usage: applicable to hot bonding panel with FPC (media ACF)
Product Dimension: panel below 7”
Accuracy: X: ±0.015 mm Y: ±0.015mm
Capacity: 320Pcs/h (bonding time is 8s)
Outline Dimension(mm): 1000Х800Х1500
Process:
Panel feeding vacuum suction FPC feeding vacuum suction
contraposition & adjustment start bonding unloading
• LHS-1229L Heat Bonding Machine
Usage: applicable to hot bond panel with FPC (media ACF)
Product Dimension: panel below 12.4”
Accuracy: X: ±0.015 mm Y: ±0.015mm
Capacity: 320Pcs/h (bonding time is 8s)
Outline Dimension(mm): 1300Х780Х1480
Process:
Panel feeding vacuum suction FPC feeding vacuum suction pre-bonding
displacement FPC feeding vacuum suction pre-bonding…… displacement
final bonding return unloading
10.
10 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
• LHS-0526F OGS manual FOG bonding machine,
Usage: applicable to hot bond panel with FPC (media ACF)
Product Dimension: panel below 5.5”
Accuracy: X: ±0.015 mm Y: ±0.015mm
Capacity: 320Pcs/h (bonding time is 8S)
Outline Dimension (mm): 900Х830Х1500
Process:
Up CCD contraposition, adapt image temporary storage technology,
complete OGS product contraposition, dual platform move front & rear
independently to complete bonding process
• LHS-1320 OGS Manual FOG Bonding Machine
Usage: applicable to hot bonding panel with FPC (media ACF)
Product Dimension: panel below 13”
Accuracy: X: ±0.015 mm Y: ±0.015mm
Capacity: 320Pcs/h (bonding time is 8S)
Outline Dimension (mm): 1300Х1040Х1580
Process:
Up CCD contraposition, adapt image temporary storage technology,
complete OGS product contraposition, dual platform move left & right
independently to complete bonding process
• LPHM-0720F Pulse Heat Bonding Machine
Usage: applicable to bonding between FPC & panel or FPC &
PCB (media: ACF or Tin)
Product Dimension: panel below 7”
Accuracy: X: ±0.015 mm Y: ±0.015mm
Capacity: 360Pcs/h (bonding time is 8S)
Outline Dimension (mm): 1000Х850Х1520
Process:
Down (up) CCD contraposition, dual platform move front & rear
independently, adapt pulsed heating to complete bonding process
• LPHM-1210F Pulse Heat Bonding Machine
Usage: applicable to bonding between FPC & panel or FPC &
PCB (media: ACF or Tin)
Product Dimension: panel below 12”
Accuracy: X/Y: ±0.015 mm
Capacity: 130Pcs/h (contraposition time is 3s, hot holding time is 12s)
Outline Dimension (mm): 800Х780Х1450
Process:
Down (up) CCD contraposition, dual platform move front & rear independently,
adapt pulsed heating to complete bonding process
11.
11 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
• LPHM-0520G Double-side Pulse Heat Bonding Machine
Usage: applicable to double-side bonding process with ACF media, double-side
main bonding between panel (double-side pre-bonding completed) and FPC
Product Dimension: panel below 7”
Accuracy: X: ±0.01 mm Y: ±0.01mm
Capacity: 360Pcs/h
Outline Dimension (mm): 1100Х770Х1460
Process:
Pulsed heating, upper and lower pressure head can be heating
simultaneously, fixed platform.
• LMP-0500S Film Laminating Machine
Usage: applicable to laminate protective film on lens
Product Dimension: 1.5~5”
Accuracy:±0.01 mm
Capacity: 600Pcs/h (exclude loading and unloading time)
Outline Dimension (mm): 1150Х680Х1775
Process:
Put LENS on workbench manually, tear film using synchronous mood,
protective film absorbed on attached head, it will conduct x, y adjustment
via optical fiber, protective film will be laminated on LENS.
• LMP-1201S Film Laminating Machine
Usage: applicable to laminate protective film on lens
Product Dimension: 5~12”
Accuracy:±0.15mm
Capacity: 600Pcs/h (exclude loading and unloading time)
Outline Dimension (mm): 1300Х1150Х1900
Process:
Put LENS on workbench manually, protective film will be positioned
via ultrasonic optical fiber, protective film will be laminated on LENS
after machine conduct x, y, θ adjustment via optical fiber,.
• LAM-0700S Mouth-Type Glue Laminating Machine
Usage: applicable to lamination between TP & mouth-type glue and
lamination between TP laminated with mouth-type glue & LCM.
Product Dimension: 1.5~7”
Accuracy:±0.1mm
Outline Dimension (mm): 1300Х1150Х1900
12.
12 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Process:
1. Put TP on material stage and start vacuum suction manually,
tear film and clean it manually.
2. Put mouth-type glue & LCM on material stage and start vacuum
suction manually, tear film and clean it manually.
3. Visual system capture product MARK and display on monitor,
conduct X.,Y. Φ fine turning to adjust and position.
4. Press start button, the rotation mechanism will transfer and turn
TP to the above the position where the mouth-type glue & LCM
will be laminated
5. Place mouth-type glue & LCM on jacking mechanism and raise
them, then start laminate mouth-type glue with LCM
6. Release vacuum automatically, respective mechanism return
• LDX-0901S Double Station Engraving Machine
Usage: applicable to precision machining for glass panel in LCD, TP industry
Working stroke (X,Y.Z): 310x420x80 (mm)
Motion accuracy: 0.01/300 mm repeating contraposition accuracy: 0.008 mm
Outline Dimension (mm): 1850X1280X1600
Max traverse speed: 12m/min
Max processing speed: 9m/min
Spindle speed: 0~60000RPM
Feature:
Marble machine body, X.Y.Z triaxial adapt high precision THK linear
guide, high precision THK grinding ball screw, preload nut, precision
couplings, high precision & sensitivity on the knife; machine has
independent lubrication system, high speed and multi-axis motion
controller, internal cooling the spindle device, outer tool cooling
device, cooling system configuring high speed spindle, special cooling
device etc to prevent dust into it. The processing platform made of
hard aluminum alloy material, fully sealed water circulation system in
the control cabinet to ensure multi-stage filtration of water, open software
interface for easy use, wide range of applications.
• LDX-2211S Singly Station Engraving Machine(with CCD)
Usage: applicable to precision machining for glass panel in OGS process
for LCD, TP industry, the machine can integrate motion control and
image recognition effectively with CCD image processing function to
achieve automatic positioning and automatic machining.
Working stroke (X,Y.Z): 470x420x80 (mm), CCD effective stroke is 350X420 (mm)
Motion accuracy: 0.01/300 mm repeating contraposition accuracy: 0.008 mm
CCD contraposition accuracy: ±0.005mm
CCD camera: 130 pixel CMOS camera, light source is a point light source
and the ring light, object distance is 70 mm
Outline Dimension (mm): 1850X1280X1600
13.
13 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Feature:
The machine has all functions and features of LDX-0901S CNC double-stations
engraving machine, it can integrate motion control and image recognition
effectively with CCD image processing function to achieve automatic positioning
and automatic machining, this will help to increase stability and yield in OGS production process.
• LOCA -0501R Vacuum Laminating Machine (rigid to rigid lamination)
Equipment profile
1.1 The device is a vacuum lamination machine suits for lamination
between sensor glass & cover lens with OCA as media, and OCA
laminated on sensor glass already.
1.2 The device is applicable for product size 2"~5", the vacuum
chamber size is 320*240mm.
1.3 Device precision:
(1) Fixture(template) precision: ±0.02mm(relative position between
sensor glass & cover lens tank’s template)
(2) Lamination precision: ±0.1mm(according to specified testing
standard, distance deviation between specified outer outline of glass & lens)
1.3 Device efficiency: device empty operation cycle≤25S/chamber(not including
loading and unloading time), 3 pieces of products at most once each chamber,
set 3.5” product size as example.
(1) If loading and unloading time exceed empty operation time, the efficiency
of each piece of product is: loading unloading time/products number each
chamber
(2) If loading and unloading time less than empty operation time, the efficiency of
each piece of product is: 25S/products number each chamber.
• S74 Laminating Machine (flex to rigid lamination)
Equipment profile
1.1 Application area: soft film laminated on hard board, and soft film laminated
on soft film(G+F/G+F+F process);
1.2 Corresponding raw material: Film, OCA and other soft film, Glass(LCD) and
other hard board;
1.3 Function description: mainly used in large and mid-size CG(cover glass)
lamination, also applicable to OCA+TP & SENSOR+ CG lamination, effective
Stage size is 500×700mm.
Product Dimension: 32” or below
Accuracy:±0.1mm
Outline Dimension (mm): 1940X1210X2380
• LOCA -1207S Vacuum Lamination machine(rigid to rigid lamination)
Project Profile:
1.1 Application area:Suits for lamination between sensor glass laminated with
OCA already & cover lens(or TP & LCM) in TP industry.
1.2 Corresponding raw material: Sensor Glass,Cover Lens (or TP & LCM),
OCA may laminated on the back of TP and LCM.
1.3 Function description: mainly used in lamination between sensor glass laminated
with OCA already & cover lens (or TP & LCM) , product size is 4”~12”(size shall
prevail with length*width specified in specification).
Accuracy:±0.1mm
Outline Dimension (mm): 1350X1600X2400
14.
14 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
We provide good tailor-made equipments service to our customers, customer’s equipment will be developed based on it’s
specific product requirements, manufacturing process etc, above only are our partial equipments specifications, more
equipments specifications will be provided upon customer’s inquiry.
Our equipments are used to manufacture TP (Touch Panel), LCD screen of Apple, Samsung, Amazon, Huawei, Lenovo etc
Automation production line & logistics line
•
SMT group transmission line Parallel transfer machine
•
•
•
•
Intelligent logistics and distribution system LCM antistatic assembling line
FOG antistatic belt production line FFU clean desk and LCM assembly line
Double aging Display multilayer aging test
15.
15 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Non-standard customized automation equipment & fixture--partial
FPC hardening device PSI inspection machine High voltage tester
Thermoforming machine Hot melt machine 3 points soldering machine
LMP-6050A shading tape laminator Automatic bead filling machine Car antenna automatic punching M/C
Tensile testing machine XYZ adjustable contraposition fixture BL testing fixture
G for 4 Half module tester IC heavy machine Electrical test stand
16.
16 / 16
Provide sets solutions of automation equipment,
non‐standard automation equipment etc for LCD, TP,
FPD products & other industrial automation industry
Half module tester Triangular prism measurement fixture Module tester (lot 3)
LCD testing standard Cut gate fixture BMW test carrier
Module 50 FVT tester Gemini flash I/O FVT tester Manual test fixture Manual test fixture
Company Add: Unit 2508A,25F bank of America Tower 12 Harcourt Road Central Hong Kong
Factory Add: No. 68 Tongfucun Industrial Park, Dalang Street, Bao'an District, Shenzhen, PRC
Contact person: David Zhang
Position: Sales & Marketing Director
Mobile: +86 13613051580
E-mail: Davidzhanggy@hotmail.com
Davidzhanggy@gmail.com
Skype: Davidzhanggy
Facebook: Davidzhanggy
Twitter: Davidzhanggy
Contact Information