1. FRANCISCO B. ESPEDILLA II
161 Kalabasa Street
Evergreen Homes, Pulanglupa 1
Las Piñas City, Philippines 1740
Home Phone: +63 4716455
Mobile Phone: +974 66194705 (Qatar)
Email: kalikot_012183@yahoo.com
OBJECTIVE: To be part of an institution where I can utilize my skills and
capability to its full potential and where responsibility and
duty as based upon the experience that I will gain which lead to
the company’s goal and objectives.
AREAS OF INTERESTS:
 Maintenance
 Manufacturing
 Engineering (Mechanical and Electrical)
 Facilities
 Research and Development
 Heating ventilation and Air-conditioning
WORK EXPERIENCES:
Name of Company: QATAR PHARMA
Address: Industrial Area, Doha, QATAR
Department: PRODUCTION / MAINTENANCE
Inclusive Dates: JUNE 5, 2014 UP TO PRESENT
Position: Production Engineer
Tool handled: Rommelag ( Plastic Bottle Blowing Machine for Bottles and
Ampoules ) , Plumat ( Plastic Film for Liquid ) , Vial ( Glass Bottle Liquid )
Key Responsibilities and Accountabilities:
 Responsible for daily production of machines
 Responsible in set – up / change size or parts of machines.
 Responsible in repair, troubleshoot and preventive maintenance of machines.
 Responsible in operation / control of machines during production.
 Responsible for CIP / SIP of machines after 24 hours running or change product
 Responsible for documentation of every batch finished

2.  Reports and coordinates to the Maintenance Department and Production
Supervisor
Name of Company: TRADEWIND ESTATES INC. (EMEPERADOR DISTILLERS INC.)
Address: Greenfield Auto Park Don Jose, Sta Rosa, Laguna
Department: MAINTENANCE / ENGINEERING
Inclusive Dates: DEC. 17, 2012 UP TO MAY 10, 2014
Position: Mechanical Maintenance / Boiler Tender
Tool handled: Bottling Machines, Boiler, Genset, Compressor, Auxillary
Equipment ( Pumps and Motors )
Key Responsibilities and Accountabilities:
 Implement equipment preventive maintenance and instrument calibration
schedules every production stop.
 Responsible for sustaining Line Maintenance of machines and downtime
troubleshooting and also repair and fabrication of worn-out parts.
 Responsible for Boiler maintence, repair, calibration and operation.
 Responsible for weekly dry run of genset
 Knowledgeable in some auxillary equipment like compressor and fire pump
 Document all downtime encountered in bottling lines for reference
 Continuous improve machine performances through equipment modification
and upgrades.
 Reports and coordinates to the Maintenance Department and Mechanical
Supervisor
Name of Company: SUNPOWER PHILS. MANUFACTURING LIMITED
Address: First Philippine Industrial Park, Sto. Tomas , Batangas
Department: EQUIPMENT ENGINEERING
Inclusive Dates: March 3, 2007 up to OCT 18, 2012
Process: ROLLPROCT
Position: Equipment Technician
Tool handled: ROLLPROCT/EDGECOAT ( Printing ) & APCVD (Deposition)
Key Responsibilities and Accountabilities:
 Implement equipment preventive maintenance and instrument calibration
schedules , ensures availability of supplies and spare parts.
 Monitors process and equipment operating conditions; report and attend to
process abnormalities and/or equipment troubles as encountered with in
tour of duty.
 Maintain full documentation and file records of all PM and repair works,
including results of root-cause analysis and investigation made on

3. encountered equipment troubles; maintain an updated file of equipment
operating manuals and engineering standards.
 Continuous improve machine performances through equipment or process
modification and upgrades.
 Actively participate in the root cause analysis and investigation process.
 Reports and coordinates to the Equipment Engineering Department and
Equipment Engineers.
 Rollproct Tool Availability owner
 Knowledgeable of basic PLC programs for tool automation
 Takes the lead role in sustaining the key initiatives in production operations
like SPC, TPM, 5S, and ISO-9001; actively participates in team activities for
continuous process improvement, equipment reliability and optimization
program.
Name of Company: EURO – MED LABORATORIES PHILS, INC.
Address: 102 Madison St., E. Delos Santos, EDSA, Mandaluyong City
Inclusive Dates: February 06, 2006 to July 2006
Department: PHARMACEUTICAL PRODUCT DIVISION and
BEVIDA DISTILLED WATER LINE DIVISION
Position: Production Engineer / Maintenance Support
Tools handled: Fillematic machine, Compression machine, Stripping machine,
Blister machine, Capping machine, Labelling machine, Shrinking Machine, Bottle
washer, Ink jet, Steam generator, Bry-air units, Chiller, Mixer, Pumps, Steam tank,
Ozonator
Key Responsibilities and Accountabilities:
 Responsible in steaming up to 121°C temperature of distilled water
pipelines, compounding tanks, utensils and machines before the production
for sterility purposes.
 Responsible in clearance of machines before and after production to avoid
contaminations.
 Responsible in cleaning of machines parts before and after production.
 Responsible in set – up / change size or parts of machines.
 Responsible in repair, troubleshoot and preventive maintenance of machines.
 Responsible in operation / control of machines during production.
 Responsible in set – up of AHU / BRY – AIR UNITS to maintain room
temperature and relative humidity during tablet production.
 Always check the valves and clamps of pipelines for leak – free and well –
tightened before the production.
 Always check the electrical, water and air supply are stable before the
operation.

4. Name of Company: DANLEX RESEARCH LABORATORIES, INC.
Address: Real Street.., Calamba, Laguna
Inclusive Dates: May 03, 2005 to February 01, 2006
Department: LIQUID - ORAL SECTION
Position: Production engineer / Liquid Section Supervisor
Tools handled: Compression machine, Capping machine, Incapsulation
machine, Stripping machine, Blister machine, Compounding tank,
Compressor, Filling machine, Shrinking machine, Mixer, Pumps, Coating machine
Key Responsibilities and Accountabilities:
 Responsible in withdrawals of the raw materials use in compounding.
 Knowledgeable in compounding liquid – type of drugs.
 Responsible in handling people especially in compounding area and liquid –
filling/capping area.
 Responsible in Set – Up of machines.
 Responsible in repair, troubleshoot and preventive maintenance of machines.
 Check – Up the cleaning of machines before and after daily operations.
 Always check that the finished product is filled – right, well – capped, and
bacteria – free.
 Responsible in turn – over of the finish product.
 Responsible in Water Purification System use in compounding area.
 Maintains a clean work area by following the GM, 5S and personal Hygiene
 Accomplishes the checklist required for the shift and prepares corresponding
reports
SKILLS and ATTRIBUTES:
 Good oral and written communication skills.
 Ability to work well in all levels.
 Computer literate.
 Have basic knowledge in creating Purchasing Requisition (iProcurement).
 Have basic knowledge in Programmable Logic Circuit (PLC).
 Knowledgeable in minor and major troubleshooting on Mechanical and
Electrical system of the machine.
 Knowledgeable in basic Electro Pneumatics, Automation, and Sensors.
 Knowledgeable in Calibration of process instrumentation.
ACCOMPLISHMENT
 Promoted as Senior Equipment Technician/Technical Specialist.

5.  Promotes projects for Yield improvements, tool availability, cost reduction,
attaining tool design UPH and OEE and Reliability.
 Implements and insure of spare availability to minimize tool downtime.
 Upgraded spare parts for fast moving components of the machine regarding
the applied force and torque on the motor and encoder to maximizing its life
span by software modification through PLC.
EDUCATION:
College: MAPUA INSTITUTE OF TECHNOLOGY (1999-2004)
Muralla st., Intramuros, Manila
Graduate of Bachelor of Science in Mechanical Engineering
Government Exam Taken:
October 2004 Board Passer
Licensure Exam in Mechanical Engineering
License No. 0064575
High School: Bernardo College (1995-1999)
Las Piñas City
Elementary: Pulanglupa Elementary School (1989-1995)
Las Piñas City
ACTIVITIES: PSME member, Campus Chapter
February – May 2004
SEMINARS Fire Protection System – July 25, 2003, MAPUA
ATTENDED: Boilers by: Boiler Technology – Aug. 8, 2003, MAPUA
Air – Conditioning by: Fedders – Koppel – Aug. 15, 2003,
MAPUA
Instrumentation and Controls – Aug. 29, 2003, MAPUA
Pneumatics – Sept. 5, 2003, MAPUA
HONDA engine parts familiarization – June 2003, MAPUA
Building File Protection Program – Sept. 2003, MAPUA
SPC Trainings: Sunpower Phil Manufacturing Lmtd
 SPC Level 1 Trainings (Basic/Introduction to SPC, 7 QC Tools, Process Nodal
Flow, GUI, IVM, FMEA, Process Mapping)
 SPC Level 2 Trainings (JMP, Box plot and multi vary charts, Cluster Analysis,
COV, Hypothesis Testing)
 Measurement System Analysis and P/T Study
 Components of Variance and Tool Lock Down

6.  8D workshop and Why Why Analysis
 Bolts & Nuts
 Basic laser safety
 Compressed gas
 Equipment Sign-off
 Hazard communication
 Tool decomposition/decommisioning
 Lubrication
 Safety
 LOTO ( lock out tag out )
 Chemical handling
 Code of Business Conduct and Ethics
 Incident Injury Free (IIF)
 Reliability Centered-Maintenance (RCM)
 Environment, Health and Safety (EHS)
 Lean Manufacturing and Kaizen Training
PERSONAL DATA:
Date of Birth: January 21, 1983
Place of Birth: Pildera II, Pasay city
Sex: Male
Nationality: Filipino
Civil Status: Single
Height: 5’5 1/2”
Weight: 163 lbs.
Religion: Roman Catholic
Mother’s Name: Melicita B. Espedilla
Occupation: Plain Housewife
Father’s Name: Francisco S. Espedilla
Occupation: Heavy Equipment Forklift operator ( abroad – Jubail, KSA )
TIN number: 305-955-707
SSS number: 3395804617
PASSPORT number: EB1506588
Philhealth number: 08-050657935-3
Pag-Ibig number: 1020-0354-5605
PLANT VISIT: MAK-BAN geothermal power plant
Laguna
Plastic Injection Molding Plant
Laguna
Cosmos Bottling Plant
Laguna

7. ________________________
Francisco B. Espedilla II