Explain the benefit of designing a foundation with LRFD as opposed to.pdf
•
0 likes•2 views
Explain the benefit of designing a foundation with LRFD as opposed to ASD Solution The LRFD is certainly an improvement over the ASD. It takes better account of variability in both loading and resistance. LRFD is a reliability based design. Even before taking my reliability based design class, I always had my doubt in applying a single factor of safety for an output derived from inputs of varying reliability. The one disadvantage of LRFD is the lack of sufficient statistical data to select appropriate factors in certain specific cases, but still better than ASD..
Report
Share
Report
Share
Download to read offline
Recommended
If a protein is destined to be a part of the cell membrane or to lea.pdf
If a protein is destined to be a part of the cell membrane or to leave a cell, describe how the
protein is processed and transported to the cell membrane.
Solution
The cellmembrane is chemically made of phospholipoprotein that is combination of
phospholipid and protein. Though protein is an integral part of plasma membrane, it allows
certain protein to enter into the cell through p.m.. The protein is known as membrane transport
protein..which is of two types that\'s carrier protein and channel protein. Carrier protein may be
open or closed to both external environment or extracellular fluid and internal environment or
intra cellular fluid but channel protein is always open to both the environment allowing entery of
ions, molecules and solutes and solvent. Due to this reason p.m. is selectively permeable
allowing some proteins in to the cell and restricting others. The carrier protein is either open or
closed to both external environment and internal environment. Active transport is done by
sodium potassium transport mechanism. ATP (adenosine tri phosphate) is needed for active
transport. Active transport occurs against the concentration gradient. Lipid bilayer is generally
not permeable. So active transport occurs with utilisation of ATP against concentration gradient.
Another type of transportation is facilitated diffusion. It doesn\'t require any energy. Generally
the polar bodies, the charged bodies and dissolve molecules pass through the membrane by this
mechanism. The hydrophobic tail of lipid molecules opposes the movement of soluble
molecules..
How do angiosperms increase the likelihood that their embryos arc mov.pdf
How do angiosperms increase the likelihood that their embryos arc moved away from the parent
plant? Why does moving the embryos away from the parent plant increase the success of the
embryo?
Solution
Ans:
Angiosperms are the flowering plants and most are terrestrial and all lack locomotion. Gametes
are delicate single cells. For two plants to cross fertilize, there must be a mechanism for the two
gametes to reach each other safely. There must also be a mechanism to disperse their offspring
far enough away from the parent so that they do not have to compete with the parent for light,
water, and soil minerals.
Seeds from the parent plant need to be dispersed away from the plant to allow the seedlings a
chance at survival without having to compete with the parent plant for space, nutrients and
sunlight. Dispersion also allows the species to spread its population across a wider territory to
ensure its continued survival.
Explanation: When too many seeds are planted in the same pot or area, the seedlings tend to be
weaker and more fragile because they have to compete with the other seedlings for resources.
There are several ways in which seeds are dispersed naturally in plants. Gravity is sometimes
sufficient to pull down heavy seeds from tall plants. The seeds then roll away from the parent
plant and begin to grow. Animals also help with seed dispersion. The seeds can have surfaces
that facilitate their sticking to the fur or skin of the animals so they can be transported as the
animal moves around. When animals eat fruit containing seeds, the seeds pass through the
animals\' gastrointestinal tracts unaffected and are excreted at different locations along with
some fertilizer nutrients to help them grow. Some seeds are light enough or have special wing-
like adaptations to allow for dispersal by wind. Other seeds can float in water and move along
with streams to a new location where there are sufficient nutrients and no plants to compete with
for water and sun. Sometimes, seed pods burst with enough force that the seeds get thrown over
a distance to allow the seedlings to grow away from the parent plants. The numerous different
ways in which plants have evolved to perfect their technique of seed dispersion is a telltale sign
of how important it is for seedlings to grow away from the parent plants..
How is FOIL used in factoring polynomialsSolutionFOIL method .pdf
How is FOIL used in factoring polynomials?
Solution
FOIL method is used for multiplying binomials. For example
F irst Terms
O utside Terms
I nside Terms
L ast Terms
(3x - 4)(2x + 1)
(3x)(2x) + (3x)(1) + (-4)(2x) + (-4)(1)
6x2 + 3x - 8x - 4
6x2 - 5x - 4 (combine like terms)
Remember FOIL works only when you multiply two binomials.
How did social revolution relate to warfare developmentSolution.pdf
How did social revolution relate to warfare development?
Solution
Warfare has built up and devastated nations, it has molded and destroyed cultures, since the
beginning of civilization, warfare has left its impact on humanity, and it affects every aspect of
human culture and life. Some historians and psychologists argue that humans naturally engage in
warfare. Therefore, as long as the human race continues to exist, so will the art of warfare.
Others have different views, claiming that warfare arose as human civilizations developed, the
politics involved between towns, states, and countries created the conflicts that raged into war.
Although the origin and future of warfare remains uncertain, history shows that many changes
took place throughout the existence of war. From the small tribal conflicts of primitive man to
the global threat of nuclear warfare, warfare has drastically changed. This paper will discuss the
evolution of warfare, as well as the impact that technology has on it.
Defining warfare is a very difficult task. A simple definition is the use of physical force to settle
disputes between organized groups. On the other hand, a more complex idea states that war is an
organized struggle between groups in which each side seeks to displace or dispel, to dominate or
to punish, or simply to be rid of the other, by inflicting what we call defeat. Gallie defines two
eras of warfare: the classic and problematic stages. The classic phase of warfare lasted from the
establishment of war until about two hundred years ago. During this period, war affected every
day life. Many years were spent fighting wars. Even in times of peace, war was still anticipated,
and thus kept everyone prepared for war. The opposing sides gathered to fight and display their
army skills, resources, and bravery in order to overcome the enemy. The classic wars ended with
the collapse of the Napoleonic Age.
a social revolution is a bottom-up, as opposed to a vanguard party–led or purely political,
revolution aiming to reorganize all of society. In the words of Alexander Berkman, social
revolution means the reorganization of the industrial, economic life of the country and
consequently also of the entire structure of society. More generally, the term \"social revolution\"
may be used to refer to a massive change in society, for instance the French Revolution, the
American Civil Rights Movement and the 1960 hippie or counterculture reformation on religious
belief, personal identity, freedom of speech, music and the arts, fashion, alternative technology
or environmentalism and decentralised media.
Social revolution is contrasted with purely a political revolution in which the government is
replaced, or the form of government altered, but in which property relations are predominantly
left intact. Social revolutions do not imply necessarily that the working class as a whole has
control over the production and distribution of capital and goods - in many countries this control.
For the following I have finished most of this question but am havin.pdf
For the following I have finished most of this question but am having problem with on method. I
just need the void copyNumbers method filled out. The commented out sections describe what it
needs to do. I have it started. Just need it finished.
package reading_with_exceptions;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.PrintStream;
import java.util.InputMismatchException;
import java.util.Scanner;
public class Reading_With_Exceptions {
// 1.) Create a Scanner from the inputFilename. Catch exceptions from errors.
// 2.) Read the first String from the file and use it to create a PrintStream
// catching appropriate exceptions
// 3.) Using hasNextInt and nextInt, carefully read the count integer.
// I recommend -1 for a count value if it is bad to indicate reading ALL
// 4.) Use copyNumbers method described below to complete the job
// 5.) Close Scanner and PrintStream objects
// 6.) Call printToScreen to copy the output file to the screen
void process(String inputFilename) {
int number_to_read = 0;
try {
Scanner input = new Scanner(inputFilename);
String outputFilename = input.next();
PrintStream os = new PrintStream(new FileOutputStream(outputFilename));
if ( input.hasNextInt()) {
number_to_read = input.nextInt();
}else {
number_to_read = -1;
}
copyNumbers(input, os, number_to_read);
input.close();
os.close();
printToScreen(outputFilename);
}catch (FileNotFoundException e) {
System.out.println(\"Cannot find file: \" + e);
return;
}
}
// The following routine is called to complete the job of copying integers to
// the output file:
// scan - a Scanner object to copy integers from
// ps - A PrintStream to write the integers to
// numIntsToRead - number of integers to read. A value of -1 ==> read all integers
void copyNumbers(Scanner scan, PrintStream ps, int numIntsToRead) {
// hasNext() can be used to see if the scan object still has data
// Note that hasNextInt() can be used to see if an integer is present
// nextInt() will read an integer
// next() can be used to skip over bad integers
while (scan.hasNext()) {
if (numIntsToRead < 0) {
//print out a complaint message and then read as many integers as you find.
scan.nextInt();
}
if (!scan.hasNextInt()) {
// print a complaint message and skip over the data
scan.next();
}
if ( scan < numIntsToRead) {
// complain but do not abort
}
}
}
public static void main(String[] args) {
Reading_With_Exceptions rwe = new Reading_With_Exceptions();
for (int i=0; i < args.length; i++) {
System.out.println(\"\ \ =========== Processing \"+ args[i] + \" ==========\ \");
rwe.process(args[i]);
}
}
// For the last step, we Copy the contents of the file to the screen
private void printToScreen(String filename) {
Scanner scan = null;
try {
FileInputStream fis = new FileInputStream(filename);
scan = new Scanner(fis);
while (scan.hasNextLine()) {
System.out.println(scan.nextLine());
}
}
catch (FileNotFoundException e) {
System.out.println(\"printToS.
Does native Con A exist as a monomer, dimer, trimer, or tetramer.pdf
Does native Con A exist as a monomer, dimer, trimer, or tetramer?
Does native Con A exist as a monomer, dimer, trimer, or tetramer?
Solution
At pH=5, the Concanavalin exists as dimer. At pH= 5, Con A exists as three dimeric types are
possible: Homologous dimers of either 2 intact or 2 fragmented monomer units and a hybrid
dimer consisting of one monomer of each form. Binding results indicate:
a. That a mixture of dimeric types must bind at pH=5, some types having one binding sites per
molecule;
b. That species must have similar affinity for ligand..
Explain role ambiguity in terms of supportive leader behavior.So.pdf
Explain role ambiguity in terms of supportive leader behavior.
Solution
Role ambiguity is the lack of clarity about expected behavior from a position
Supportive leaders provide emotional support to employees, threat employees well and care
about them.
Role ambiguity in terms of supportive leader behavior is when the leader does not know how to
provide such emotional support to his team members, he does not know how to support them
when they are under stress or when they are unpleasent with their jobs..
Expand upon selectionSortType so that you are no longer bound to a l.pdf
Expand upon selectionSortType so that you are no longer bound to a list of 1000 elements. Thus,
you\'ll be using pointers to create dynamic arrays.
template
void selectionSortType::setUnsortedList (const elemType list[], int size)
{
elementsInList = size;
for (int i=0; i
void selectionSortType::getUnsortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
void selectionSortType::getSortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
int selectionSortType::getLargestElement() const
{
return sortedList[elementsInList-1];
}
template
int selectionSortType::getSmallestElement() const
{
return sortedList[0];
}
template
float selectionSortType::getAverage() const
{
float sum = 0;
for (int i=0; i
void selectionSortType::printUnsortedList(std::ostream& output) const
{
for (int i=0; i
void selectionSortType::printSortedList(std::ostream& output) const
{
for (int i=0; i
bool selectionSortType::equalList(const selectionSortType& otherList) const
{
if (otherList.elementsInList != elementsInList)
return false;
for (int i=0; i
selectionSortType::selectionSortType(const elemType list[], int size)
{
setUnsortedList(list,size);
}
template
selectionSortType::selectionSortType() //default constructor
{
elementsInList = 0;
}
template
void selectionSortType::sortList()
{
for (int i=0; i
Solution
template
void selectionSortType::setUnsortedList (const elemType list[], int size)
{
elementsInList = size;
for (int i=0; i
void selectionSortType::getUnsortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
void selectionSortType::getSortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
int selectionSortType::getLargestElement() const
{
return sortedList[elementsInList-1];
}
template
int selectionSortType::getSmallestElement() const
{
return sortedList[0];
}
template
float selectionSortType::getAverage() const
{
float sum = 0;
for (int i=0; i
void selectionSortType::printUnsortedList(std::ostream& output) const
{
for (int i=0; i
void selectionSortType::printSortedList(std::ostream& output) const
{
for (int i=0; i
bool selectionSortType::equalList(const selectionSortType& otherList) const
{
if (otherList.elementsInList != elementsInList)
return false;
for (int i=0; i
selectionSortType::selectionSortType(const elemType list[], int size)
{
setUnsortedList(list,size);
}
template
selectionSortType::selectionSortType() //default constructor
{
elementsInList = 0;
}
template
void selectionSortType::sortList()
{
for (int i=0; i.
Recommended
If a protein is destined to be a part of the cell membrane or to lea.pdf
If a protein is destined to be a part of the cell membrane or to leave a cell, describe how the
protein is processed and transported to the cell membrane.
Solution
The cellmembrane is chemically made of phospholipoprotein that is combination of
phospholipid and protein. Though protein is an integral part of plasma membrane, it allows
certain protein to enter into the cell through p.m.. The protein is known as membrane transport
protein..which is of two types that\'s carrier protein and channel protein. Carrier protein may be
open or closed to both external environment or extracellular fluid and internal environment or
intra cellular fluid but channel protein is always open to both the environment allowing entery of
ions, molecules and solutes and solvent. Due to this reason p.m. is selectively permeable
allowing some proteins in to the cell and restricting others. The carrier protein is either open or
closed to both external environment and internal environment. Active transport is done by
sodium potassium transport mechanism. ATP (adenosine tri phosphate) is needed for active
transport. Active transport occurs against the concentration gradient. Lipid bilayer is generally
not permeable. So active transport occurs with utilisation of ATP against concentration gradient.
Another type of transportation is facilitated diffusion. It doesn\'t require any energy. Generally
the polar bodies, the charged bodies and dissolve molecules pass through the membrane by this
mechanism. The hydrophobic tail of lipid molecules opposes the movement of soluble
molecules..
How do angiosperms increase the likelihood that their embryos arc mov.pdf
How do angiosperms increase the likelihood that their embryos arc moved away from the parent
plant? Why does moving the embryos away from the parent plant increase the success of the
embryo?
Solution
Ans:
Angiosperms are the flowering plants and most are terrestrial and all lack locomotion. Gametes
are delicate single cells. For two plants to cross fertilize, there must be a mechanism for the two
gametes to reach each other safely. There must also be a mechanism to disperse their offspring
far enough away from the parent so that they do not have to compete with the parent for light,
water, and soil minerals.
Seeds from the parent plant need to be dispersed away from the plant to allow the seedlings a
chance at survival without having to compete with the parent plant for space, nutrients and
sunlight. Dispersion also allows the species to spread its population across a wider territory to
ensure its continued survival.
Explanation: When too many seeds are planted in the same pot or area, the seedlings tend to be
weaker and more fragile because they have to compete with the other seedlings for resources.
There are several ways in which seeds are dispersed naturally in plants. Gravity is sometimes
sufficient to pull down heavy seeds from tall plants. The seeds then roll away from the parent
plant and begin to grow. Animals also help with seed dispersion. The seeds can have surfaces
that facilitate their sticking to the fur or skin of the animals so they can be transported as the
animal moves around. When animals eat fruit containing seeds, the seeds pass through the
animals\' gastrointestinal tracts unaffected and are excreted at different locations along with
some fertilizer nutrients to help them grow. Some seeds are light enough or have special wing-
like adaptations to allow for dispersal by wind. Other seeds can float in water and move along
with streams to a new location where there are sufficient nutrients and no plants to compete with
for water and sun. Sometimes, seed pods burst with enough force that the seeds get thrown over
a distance to allow the seedlings to grow away from the parent plants. The numerous different
ways in which plants have evolved to perfect their technique of seed dispersion is a telltale sign
of how important it is for seedlings to grow away from the parent plants..
How is FOIL used in factoring polynomialsSolutionFOIL method .pdf
How is FOIL used in factoring polynomials?
Solution
FOIL method is used for multiplying binomials. For example
F irst Terms
O utside Terms
I nside Terms
L ast Terms
(3x - 4)(2x + 1)
(3x)(2x) + (3x)(1) + (-4)(2x) + (-4)(1)
6x2 + 3x - 8x - 4
6x2 - 5x - 4 (combine like terms)
Remember FOIL works only when you multiply two binomials.
How did social revolution relate to warfare developmentSolution.pdf
How did social revolution relate to warfare development?
Solution
Warfare has built up and devastated nations, it has molded and destroyed cultures, since the
beginning of civilization, warfare has left its impact on humanity, and it affects every aspect of
human culture and life. Some historians and psychologists argue that humans naturally engage in
warfare. Therefore, as long as the human race continues to exist, so will the art of warfare.
Others have different views, claiming that warfare arose as human civilizations developed, the
politics involved between towns, states, and countries created the conflicts that raged into war.
Although the origin and future of warfare remains uncertain, history shows that many changes
took place throughout the existence of war. From the small tribal conflicts of primitive man to
the global threat of nuclear warfare, warfare has drastically changed. This paper will discuss the
evolution of warfare, as well as the impact that technology has on it.
Defining warfare is a very difficult task. A simple definition is the use of physical force to settle
disputes between organized groups. On the other hand, a more complex idea states that war is an
organized struggle between groups in which each side seeks to displace or dispel, to dominate or
to punish, or simply to be rid of the other, by inflicting what we call defeat. Gallie defines two
eras of warfare: the classic and problematic stages. The classic phase of warfare lasted from the
establishment of war until about two hundred years ago. During this period, war affected every
day life. Many years were spent fighting wars. Even in times of peace, war was still anticipated,
and thus kept everyone prepared for war. The opposing sides gathered to fight and display their
army skills, resources, and bravery in order to overcome the enemy. The classic wars ended with
the collapse of the Napoleonic Age.
a social revolution is a bottom-up, as opposed to a vanguard party–led or purely political,
revolution aiming to reorganize all of society. In the words of Alexander Berkman, social
revolution means the reorganization of the industrial, economic life of the country and
consequently also of the entire structure of society. More generally, the term \"social revolution\"
may be used to refer to a massive change in society, for instance the French Revolution, the
American Civil Rights Movement and the 1960 hippie or counterculture reformation on religious
belief, personal identity, freedom of speech, music and the arts, fashion, alternative technology
or environmentalism and decentralised media.
Social revolution is contrasted with purely a political revolution in which the government is
replaced, or the form of government altered, but in which property relations are predominantly
left intact. Social revolutions do not imply necessarily that the working class as a whole has
control over the production and distribution of capital and goods - in many countries this control.
For the following I have finished most of this question but am havin.pdf
For the following I have finished most of this question but am having problem with on method. I
just need the void copyNumbers method filled out. The commented out sections describe what it
needs to do. I have it started. Just need it finished.
package reading_with_exceptions;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.PrintStream;
import java.util.InputMismatchException;
import java.util.Scanner;
public class Reading_With_Exceptions {
// 1.) Create a Scanner from the inputFilename. Catch exceptions from errors.
// 2.) Read the first String from the file and use it to create a PrintStream
// catching appropriate exceptions
// 3.) Using hasNextInt and nextInt, carefully read the count integer.
// I recommend -1 for a count value if it is bad to indicate reading ALL
// 4.) Use copyNumbers method described below to complete the job
// 5.) Close Scanner and PrintStream objects
// 6.) Call printToScreen to copy the output file to the screen
void process(String inputFilename) {
int number_to_read = 0;
try {
Scanner input = new Scanner(inputFilename);
String outputFilename = input.next();
PrintStream os = new PrintStream(new FileOutputStream(outputFilename));
if ( input.hasNextInt()) {
number_to_read = input.nextInt();
}else {
number_to_read = -1;
}
copyNumbers(input, os, number_to_read);
input.close();
os.close();
printToScreen(outputFilename);
}catch (FileNotFoundException e) {
System.out.println(\"Cannot find file: \" + e);
return;
}
}
// The following routine is called to complete the job of copying integers to
// the output file:
// scan - a Scanner object to copy integers from
// ps - A PrintStream to write the integers to
// numIntsToRead - number of integers to read. A value of -1 ==> read all integers
void copyNumbers(Scanner scan, PrintStream ps, int numIntsToRead) {
// hasNext() can be used to see if the scan object still has data
// Note that hasNextInt() can be used to see if an integer is present
// nextInt() will read an integer
// next() can be used to skip over bad integers
while (scan.hasNext()) {
if (numIntsToRead < 0) {
//print out a complaint message and then read as many integers as you find.
scan.nextInt();
}
if (!scan.hasNextInt()) {
// print a complaint message and skip over the data
scan.next();
}
if ( scan < numIntsToRead) {
// complain but do not abort
}
}
}
public static void main(String[] args) {
Reading_With_Exceptions rwe = new Reading_With_Exceptions();
for (int i=0; i < args.length; i++) {
System.out.println(\"\ \ =========== Processing \"+ args[i] + \" ==========\ \");
rwe.process(args[i]);
}
}
// For the last step, we Copy the contents of the file to the screen
private void printToScreen(String filename) {
Scanner scan = null;
try {
FileInputStream fis = new FileInputStream(filename);
scan = new Scanner(fis);
while (scan.hasNextLine()) {
System.out.println(scan.nextLine());
}
}
catch (FileNotFoundException e) {
System.out.println(\"printToS.
Does native Con A exist as a monomer, dimer, trimer, or tetramer.pdf
Does native Con A exist as a monomer, dimer, trimer, or tetramer?
Does native Con A exist as a monomer, dimer, trimer, or tetramer?
Solution
At pH=5, the Concanavalin exists as dimer. At pH= 5, Con A exists as three dimeric types are
possible: Homologous dimers of either 2 intact or 2 fragmented monomer units and a hybrid
dimer consisting of one monomer of each form. Binding results indicate:
a. That a mixture of dimeric types must bind at pH=5, some types having one binding sites per
molecule;
b. That species must have similar affinity for ligand..
Explain role ambiguity in terms of supportive leader behavior.So.pdf
Explain role ambiguity in terms of supportive leader behavior.
Solution
Role ambiguity is the lack of clarity about expected behavior from a position
Supportive leaders provide emotional support to employees, threat employees well and care
about them.
Role ambiguity in terms of supportive leader behavior is when the leader does not know how to
provide such emotional support to his team members, he does not know how to support them
when they are under stress or when they are unpleasent with their jobs..
Expand upon selectionSortType so that you are no longer bound to a l.pdf
Expand upon selectionSortType so that you are no longer bound to a list of 1000 elements. Thus,
you\'ll be using pointers to create dynamic arrays.
template
void selectionSortType::setUnsortedList (const elemType list[], int size)
{
elementsInList = size;
for (int i=0; i
void selectionSortType::getUnsortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
void selectionSortType::getSortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
int selectionSortType::getLargestElement() const
{
return sortedList[elementsInList-1];
}
template
int selectionSortType::getSmallestElement() const
{
return sortedList[0];
}
template
float selectionSortType::getAverage() const
{
float sum = 0;
for (int i=0; i
void selectionSortType::printUnsortedList(std::ostream& output) const
{
for (int i=0; i
void selectionSortType::printSortedList(std::ostream& output) const
{
for (int i=0; i
bool selectionSortType::equalList(const selectionSortType& otherList) const
{
if (otherList.elementsInList != elementsInList)
return false;
for (int i=0; i
selectionSortType::selectionSortType(const elemType list[], int size)
{
setUnsortedList(list,size);
}
template
selectionSortType::selectionSortType() //default constructor
{
elementsInList = 0;
}
template
void selectionSortType::sortList()
{
for (int i=0; i
Solution
template
void selectionSortType::setUnsortedList (const elemType list[], int size)
{
elementsInList = size;
for (int i=0; i
void selectionSortType::getUnsortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
void selectionSortType::getSortedList(elemType list[], int& size) const
{
size = elementsInList;
for (int i=0; i
int selectionSortType::getLargestElement() const
{
return sortedList[elementsInList-1];
}
template
int selectionSortType::getSmallestElement() const
{
return sortedList[0];
}
template
float selectionSortType::getAverage() const
{
float sum = 0;
for (int i=0; i
void selectionSortType::printUnsortedList(std::ostream& output) const
{
for (int i=0; i
void selectionSortType::printSortedList(std::ostream& output) const
{
for (int i=0; i
bool selectionSortType::equalList(const selectionSortType& otherList) const
{
if (otherList.elementsInList != elementsInList)
return false;
for (int i=0; i
selectionSortType::selectionSortType(const elemType list[], int size)
{
setUnsortedList(list,size);
}
template
selectionSortType::selectionSortType() //default constructor
{
elementsInList = 0;
}
template
void selectionSortType::sortList()
{
for (int i=0; i.
describe the three major categorical theories of language developmen.pdf
describe the three major categorical theories of language development,as listed below .consider
the emphasis each places on innate abilities versus environment influences.also attribute key
terms and theorist with one if the following categories. write a one page report on a language
theorist or researcher who asserts a position that is different from your own preferred notion.
.Behaviorist
.Nativist
.Interactionist
Solution
1). Behaviourist: This is proposed by the behavioural theorists Skinner. As per his theory,
children imitate what they see and hear and all behaviour is acquired by learning, so it can be
unlearned by either the positive reinforcement or negative reinforcement. Skinner proposed that
the speech of children is shaped by adults by reinforcing the babbling of infants.
2). Nativist: Nativist Noam Chomsky proposed a “LAD”, Language Acquisition Device, and
believed that children are born with certain innate skills of language learning, which determines
their speed of learning. They can learn the native language at a high speed and can improve their
grammatical skills without much effort. The same inheritance factor is responsible for the skill of
learning multiple languages in certain people.
3). Interactionist: Lev Vygotsky described the concept of “zone of proximal development,”
which explains how the children learn better from the other children, i.e. collaborative learning.
School environment play an important role in improving the intellectual skills of the children by
means of classroom teachings and also learning from the other children. Interaction with the
other school children also influences the development of communication skills in the society.
Children learn from the other children in a better way than do from the adults..
Compare the capabilities of the Microsoft Access, Microsoft SQL Serv.pdf
Compare the capabilities of the Microsoft Access, Microsoft SQL Server, Oracle’s MySQL, and
Oracle relational database management systems (RDBMSs). Your paper should discuss the
processing speeds, data storage capabilities, maximum users supported, platforms supported,
user interfaces, development tools, vendor support, and cost. Discuss and cite at least two
references in addition to our textbook. Your paper should be 3-5 pages in length (excluding title
and References pages)
Solution
Microsoft Access
Overview:
Microsoft Access is a part of Microsoft Office,
it is commercially available database in the market
Inexpensive/standard on most computers
users can create complex databases
database professionalas can use construct a database
customers of MS-Access:
It is mainly used in small corporate companies or IT Sectors with 1-80 endusers.
Features of MS-Access:
1.It is having GUI Interface for creating databases
2. A databae contains tables, forms, reports, queries, macros.
3. It facilitates autocontent wizards to build tables or forms or reports.
4. It acts as an interface to other DBMS using ODBC
5. It is used for small business companies
6. Provides security like password protection
7. Provides a Data dictionary
8. We can repair the database
9. We can create different views
10. External data can be imported into Access
11. We can create web pages based using the database
12. It has as built in Macro functions
13. It uses Structurered Query Language
14. We can create forms, reports etc by using Visual Basic Application programming
15. Provides Add in controls like calendars
16. It can merged into word and analysed with Excel etc.
Issues:
Security:
User level security is very difficult
Tuning:
It does not have the ability to split over multiple Hard Drives, multiple CPUs or to place tables
into memory.
Locking:
Basic handling of concurrent users Backup and recovery at basic level.
ANSI SQL standard often doesn\'t work,MS-Access has it\'s own modified version of ANSI
SQL.
MySQL
Overview
MySQL is a database engine. It has a command line interface that allows the creation of
database. It Requires Front-end applications to access it for end users. EX:- C#, PHP, Microsoft
ASP.Net.
Typical users
Small companies or workgroups, through to very large Internet databases with large numbers of
users
Ex:wikipedia,Moodle.
Features
1. Speed:One of the fastest databases available
2. Ease of use: when compared to larger databases such as Oracle Uses standard SQL
3. Capability: A multi-threaded server allowing many clients to connect at the same time Fully
networked for the Internet with built in security
4.Portability: Runs on a many operating systems and different hardware
5. Small size: when compared to other large databases e.g. Oracle
6. Availabliity and Cost: Open Source ,Free in most situations to use
7. Open distribution and source code: You can check how it works – if you have the knowledge.
8. interface to other DBMS’s using Open Database Connectivit.
case study of a female with a parasitic disease Here is a Microbiolog.pdf
case study of a female with a parasitic disease Here is a Microbiology student\'s story from her
point of view and in her own words. Some words were changed to aid in understanding, but the
context was not changed. This is an actual illness that happened to me whenIwas 18 years old
lving in Freetown, Sierra Leone, on the west coast of Africa. Here is some background
information tounderstand our living situation: My family and moved to the city as displaced
refugees due to several rebel attacks in my home town during the war. We rented afour bedroom
apartment for a family of over fifteen and shared two pot- hole toilets with over seventy people.
The house llved in was on top of asteep hilandat the bottom of the hill was a runni down the hill,
but ng stream of water where people in the neighborhood did laundry,inever went there were
many monitor lizards by the stream that would come up the hill sunny days to bask on the rocks.
My family and lused to dry our clothes on the rocks after washing them. My cook helped with
the laundry and a few times, my older sister bought snail meat from the market to because it was
cheap and I helped her prepare the food. on the last day of school holiday, had a sight headache
way home. When got home my mum gave me Tylenol (500mg) and I went to bed, but headache
did not stop That evening had a slight fever and some body aches. The headache continued and
was constant, with high fevers in the evenings and nights, and accompanied by chills. I have a
brother who is a doctor and was working in a private hospital. After a week of constant
headaches, and fevers my brother didamala test which was positive. I was gven since symptoms
got worse even after reatment for malaria, I was vomiting a lot, anemic, had abdominal pain.
received a blood transtusion with was very weak, could not walk and was dizzy all the time. One
day, was unconscious for a couple of hours and my family thought Iwas dying. This was after
my My to a stool found out another parastic disease along with malaria. I was given Braziguantel
for a day and after a days was feeling better and back my feet.ido not remember the exact three
months, submitted another stool sample for testing and it was negative.I was free from the
second parasite. Below is a picture of the eggs that the doctor would have seen upon microscopic
examination of the patient\'s stool. Distribution of this parasite is throughout Africa, but can also
be foundins America, the Caribbean, and Puerto Rico. what are the possible diagnoses for this
patient? What are your clues? What is the most likely diagnosis? Why? What are the sens and
symptoms? How is this disease transmitted? What are the causal agents? Which species s most
likely the causal agent in this case? wtyr what is the causal agent of malarla? what is the vector?
of the pathogen that causes this parastic disease? What is the classification the pathogen that
causes malaria? what is the classatication of the vector for malaria?
Solutio.
are marine multicellular protists belonging to the larger brown alg.pdf
are marine multicellular protists belonging to the larger brown algae. They are responsible for
most of the food production through the photosynthesis in regions where they occur. The cell
walls of fungi are made up of polysaccharides and In hornworts and liverworts which are non-
vascular plants help anchor the minute plant. All plants exhibit of generations of diploid
sporophytes with haploid gametophytes. 88. In plants the sporophyte generation does not
produce as a result of melosis. Circulatory pathway between the lungs and the heart Most
flatworms are meaning each individual containing both male and female sexual structures. solid
worms that lack a body caity Members of the class octopuses, squids, and nautilus are the most
intelligent of the invertebrates. Leeches along with other oligochaetes possess an organ called a
which secretes a cocoon specialized to receive the eggs. The respiratory organ in the Arachinid,
spider is called Breaking up of fat globules into smaller droplets by the action of bile salts in
addition to containing two pairs antennae, also have legs on their abdomen and thorax,
Echinoderms are symmetrical animals with a five-part body plan. Lymphatic vessels that aids
the absorption of lipids Birds like mammals are meaning that they can regulate their body
temperatures within close limits. All vertebrates have a heart and a(n) circulatory system of
blood vessels.
Solution
Answer:
84). Stramenopiles
A subgroup of chromalveolates, the stramenopiles, also referred to as heterokonts, includes
photosynthetic marine algae and heterotrophic protists. The unifying feature of this group is the
presence of a textured, or \"hairy,\" flagellum.
85). Chitin
86). Rhizoids
Rhizoids are the colorless rootlike projections of mosses, liverworts, and hornworts that anchor
them to the substrate.
87). Alternation
The multicellular haploid plant structure is called the gametophyte, which is formed from the
spore and give rise to the haploid gametes. The fluctuation between these diploid and haploid
stages that occurs in plants is called the alternation of generations.
89). Pulmonary circulation
Pulmonary circulation is the portion of the cardiovascular system which carries deoxygenated
blood away from the heart, to the lungs, and returns oxygenated (oxygen-rich) blood back to the
heart. The term pulmonary circulation is readily paired and contrasted with the systemic
circulation.
90). Hermaphrodites
Many flatworms are \"hermaphroditic\". It means that each individual has both male and female
\"gonads\", structures producing the \"gametes\" (sex cells, each with half the normal number of
chromosomes)
91). Acelomates
Acoelomate: an invertebrate lacking a coelom; especially : one belonging to the group
comprising the flatworms and nemerteans and characterized by bilateral symmetry and a
digestive cavity that is the only internal cavity..
8-9 Which gene (C or D) is downstream in the pathway based on the ep.pdf
8-9 Which gene (C or D) is downstream in the pathway based on the epistatic class for feeding
behavior? Gene C gene D Feeding Experiment: If methionine is added to the growth media of
these mutant strains, all of them can grow. Some of them can intermediates in the synthesis of
methionine are added. The intermediates include homocysteine, cysteine and cystathionine. In
the table below the growth behavior (+ or -) of the methionine auxotrophs are shown when each
strain is fed different compounds. Using this table, order the synthesis of intermediates from first
to last in the synthesis of methionine Order of intermediates: ---- rightarrow _________ ----
rightarrow _________ ---- rightarrow _________ methionine Above each arrow indicate where
each mutant (met A, B or Cor D) belongs. ---- rightarrow _________ ---- rightarrow
_________ ---- rightarrow _________ methionine What intermediate builds up in the met A
strain? _________ what intermediate builds up in the met C strain? __________ What
intermediate builds up in the met D strain?
Solution
1.The gene D is downstream in the process.
2.cysteine - cystathionine - homocysteine - methionine.
3.The first arrow represent strain B, the second arrow represent strain C, the third arrow
represent strain D and fourth arrow represent strain A..
4. Belief in God Religion Studies researchers were interested in ma.pdf
4. Belief in God: Religion Studies researchers were interested in making in- ferences about the
true proportion of Canadians who believe in some form of God. They randomly surveyed 100
Canadians and asked them whether or not they believed in God (‘Yes’ or ‘No’). 61 answered
‘Yes’. Below is the R output:
0.61
Solution
a) 61 [ANSWER]
b)
Ho: u = 0.5
Ha: u=/= 0.5 [ANSWER]
c) chi^2 = 4.84 [ANSWER]
d) chi^2(df = 1)
e)
(0.514403, 0.705597) [ANSWER]
f)
As this one is one tailed, then we divide the two tailed probability by 2,
P = 0.028/2 = 0.014 [ANSWER]
As P < 0.05, Reject Ho. [ANSWER]
g)
There is significant evidence that majority of Canadians believe in some form of God with P
value of 0.014..
18. Identify (at least 5) and explain their meanings of reducing ble.pdf
18. Identify (at least 5) and explain their meanings of reducing bleeding in concrete? 19. Identify
and explain the early year of Portland cement. When was it first produced in the US?
20. Aggregates are usually divided into how many groups?
21. Name and describe three chemical admixtures in concrete?
22. What are the major reasons for using chemical admixtures in concrete mixtures?
23. Why is concrete so widely used?
24. How can we produce air-entraining concrete?
25. What are concrete components?
26. What are footings? Name two types and show how they relate to the building?
27. What are two types of Concrete Buildings Systems?
28. What are the six categories of concrete wall systems in current use?
Solution
18) Bleeding in fresh concrete refers to the process where free water in the mix is pushed upward
to the surface due to the settlement of heavier solid particles such as cement and water. Some
bleeding is normal but excessive bleeding can be problematic. The way you work that bleed
water can affect the durability of your products.
The biggest factor in bleed water rates is the water-to-cement ratio. A higher ratio can lead to
excessive bleeding. The cement type and fine aggregates can play a role in determining the bleed
rate. The fewer fines you have in your mix, the more bleeding will occur. Factors also include
concrete height and pressure. The relationship between bleed water and concrete heights starts
off as linear, but eventually becomes nonlinear at increased heights.
Ways to reduce bleeding in concrete include:
19) Portland cement is a basic cement mixture and a fundamental ingredient for many common
cement applications. Because Portland cement is very common, it is also often called “Ordinary
Portland Cement” or simply “OPC.” Since the early 20th century, Portland cement has been used
internationally for a wide variety of applications including concrete projects, mortar pastes,
stucco decorations, and grout fillings
Roman cement was the predecessor to ordinary Portland cement. A crude form of Roman cement
was rediscovered by English engineer John Smeaton in 1756. The formula for Roman cement
was refined and patented in 1796 by James Parker.
Around 1811, James Frost developed British cement: a new way of processing cement that
became instrumental in making Portland cement. In 1824, the first form of Portland cement was
patented by English cement manufacturer Joseph Aspdin. Aspdin’s version of Portland cement
was further refined by his son, William, in 1843, and it closely resembled the ordinary Portland
cement we know today.
The United States imported Portland cement from Germany and England as early as 1868.
Between the 1970s and 1980s, the United States began manufacturing their Portland cement in
Michigan and Pennsylvania. Within a few years, most of the Portland cement used in the United
States was produced locally.
20) For a good concrete mix, aggregates need to be clean, hard, strong particles free of absorbed
chemicals o.
With enough money, energy, and political will, the nations of the wo.pdf
With enough money, energy, and political will, the nations of the world could build and launch a
space ship that will reach the nearest star, Alpha Centauri, and bring back news of life there:
A. Before this decade is over.
B. In about 50 years.
C. With current technology the trip would take a hundred thousand years.
D. With current technology we cannot get out of the Solar system, no matter how much time.
This question is rather difficult. I think it would take over 50 years because it may have to go to
each planet to look for life.
Solution
Its distance of 4.3 light-years equals 25.6 trillion miles away – nearly 300,000 times the distance
from the Earth to the sun. It would take over 100,000 years using conventional technology.
So the answer is C..
Which members of the truss are zero-force members Solutionass.pdf
Which members of the truss are zero-force members?
Solution
assuming all members to be weightless.
at the joint E, the only force possible in the vertical direction is due to DE. so the vertical
component of force in DE should be zero, because the joint E is at equilibrium. If the vertical
component is zero means there is no force in that member; it is a pin jointed member and force
will be along the bar and it is an inclined bar. if there is a horizontal component, there will be a
vertical component.
EF is a zero force member, because there is no force in x direction at E as discussed before.
at joint D sum of forces along x direction should be zero. Since the DE is a zero force member,
CD should also be a zero force member
DF should also be a zero force member because at D both others are zero force members and
there will be no member to offer reaction force.
CF will have some force since it will have to compensate the vertical 10KN. and all other
members will havesome force from there onwards. the values of force will depend on the lengths
of the members.
so the zero force members are CD, DE, DF, and FE.
Which THREE of the following statements about autotrophs and heterot.pdf
Which THREE of the following statements about autotrophs and heterotrophs on Earth are
TRUE?
Question 10 options: The answer is NOT 2, 6, 7 or 3, 5, 4
Heterotrophs that do not eat autotrophs every day will die in a short time.
Autotrophs depend on heterotrophs to oxidize sugar and release CO2 into the atmosphere.
The majority of heterotrophs on Earth do not use aerobic respiration as a form of energy
conversion.
Heterotrophs evolved on Earth before autotrophs.
The majority of autotrophs on Earth require aerobic respiration in order to survive.
Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support aerobic
respiration.
Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
There are no metabolic differences between autotrophs and heterotrophs.
Heterotrophs that do not eat autotrophs every day will die in a short time.
Autotrophs depend on heterotrophs to oxidize sugar and release CO2 into the atmosphere.
The majority of heterotrophs on Earth do not use aerobic respiration as a form of energy
conversion.
Heterotrophs evolved on Earth before autotrophs.
The majority of autotrophs on Earth require aerobic respiration in order to survive.
Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support aerobic
respiration.
Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
There are no metabolic differences between autotrophs and heterotrophs.
Solution
the correct statement would be :
4: because autotrophy is more complex than heterotrophy , the very first organisms were
heterotrophs because they could feed on the molecules surrounding them.
6: Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support
aerobic respiration.
because if the autotrophs do not produce oxygen then heterotrophs can\'t live. infact the earth\'s
atmosphere before autotrophs was without oxygen
7: Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
similarly, heterotrophs never had the ability to convert sunlight into chemical energy. they only
depended on autotrophs to produce food when the moleclar food was scarce..
What type of biometric error signifies that an authorized user has b.pdf
What type of biometric error signifies that an authorized user has been denied legitimate access?
A. Type I
B. Type II
C. Type III
D. Type IV
Solution
answer is a.type1
usually type 1 error raised when the autherized user with his credinals is rejected because of the
system fault are high accurate device,in this senario the authorized user is denied to legitimate
acces that meand user is declined to access the resources because of type 1 error.
What is an unintended medical consequences What is an example of on.pdf
What is an unintended medical consequences? What is an example of one?
Solution
Unintended medical consequences are those outcomes which were unforeseen and not intended
from a set of medical actions. Unintended medical consequences are threat to heath care and are
required to be given close attention and deep examination of the causes.
One of the example of unintended medical consequences is someone goes on diet and he eats
fruits only. Instead of lessening his weight, his weight actually increased..
What is the best explanation for large smooth regions on Saturns m.pdf
What is the best explanation for large smooth regions on Saturn\'s moon Enceladus?
A. Enceladus is so small that it never gets hit by meteors.
B. Water from sub-surface oceans can escape through geysers to refresh the surface.
C. Orbital resonances with Titan and Mimas prevent meteors from hitting Enceladus.
D. Saturn\'s magnetic field prevents meteors from hitting Enceladus.
E. Saturn\'s rings protect the moon from impacts.
Solution
answer is E.
Thirty students recorded the colors of their eyes, choosing from the.pdf
Thirty students recorded the colors of their eyes, choosing from the colors brown, blue, green,
hazel, and black. This data can be appropriately summarized in a Scatter plot Categorical
frequency distribution Ordinal frequency distribution Stem and leaf plot
Solution
Categorical frequency distribution because one variable is categorical (eye color).
The probability that a randomly selected adult owns an e-reader is 0..pdf
The probability that a randomly selected adult owns an e-reader is 0.26. The probability that a
randomly selected adult owns a tablet computer is 0.31. The probability that a randomly
selected adult owns both kinds of devices is 0.17.
The events E: a randomly selected adult owns an e-reader and T: a randomly selected adult
owns a tablet computer areAIndependent because P(E) x P(T) = P(E and T)BIndependent
because P(E) x P(T) P(E and T)CDependent because P(E) x P(T) = P(E and T)DDependent
because P(E) x P(T) P(E and T)Eimpossible to tell if independent or not due to insufficient
information
Solution
P(E) = P( e - reader) = 0.26
P(T) = P( tablet computer) = 0.31
P( E n T) = P(e -reader and tablet) = 0.17
P(E) x P(T) = 0.26*0.31 = 0.0806
[ANSWER] D. Dependent because P(E) x P(T) P(E and T).
The following tables relates degree of interest in political electio.pdf
The following tables relates degree of interest in political elections to education and age:
Test two hypotheses,
H1: given educational level, age and degree of interest are unrelated, and
H2: given age, educational level and degree of interest are unrelated.No high school
educationDegree of InterestUnder 45Over 45Great71217Little305652
Solution
Df = 3,4
p value = 0.1469
As p >0.05, accept null hypothesis that H0: given educational level, age and degree of interest
are unrelated, and.
1. Baking a potato takes a long time, even when cooking uses differe.pdf
1. Baking a potato takes a long time, even when cooking uses different forms of
thermodynamics. Even in a hot oven, the inside of a potato warms up very slowly.
a. What makes it hard for conduction to transfer heat to the center of the potato?
b. What makes it hard for convection to transfer heat to the center of the potato?
c. What makes it hard for radiation to transfer heat to the center of the potato?
d. Why does inserting a metal skewer through the potato help it to cook quickly
e. Why Can a Microwave do this job more efficiently and quicker?
f. What is a potato clock and why does it work?
2. An electric hot water heater takes cold water at its inlet pipe and delivers hot water at its outlet
pipe. Between these two pipes is a large water container. Many electric hot water heaters have
two separate heating elements: one near the top of the water container and one near the bottom.
Both heating elements project into the same hot water container inside the water heater. When
the top element is heating water at the top of the container, why doesn’t convection occur and
cause water at the bottom of the container to also become hot?
Convection dictates where the water pipes attach to the container. Where hot water should be
extracted from the container, and where should cold water be introduced into the container to
replace that hot water?
Why does the water heater’s bottom heating element operate more often and age more quickly
than its top heating element?
Why is it important to thermally insulate the hot water heater’s container?
Energy flows into the hot water heater as electricity. Since energy is conserved and can’t
accumulate forever inside the heater, it must leave somehow. At a time when the hot water is
being used, how does most of the energy leave the hot water heater?
How does “Instant Hot” water in a water cooler work differently?
g. After a new water heater is installed in the basement, the bathroom sink in a 2 story home
keeps banging and shooting out water. What might have cause this and what can be done to fix
this yourself?
3. Friction in starting fires
a. If you press a wooden peg against another piece of wood and spin the peg rapidly, it can
become hot enough to ignite. The peg produces thermal energy no matter how fast it spins, so
why is it important that it spin rapidly?
b. If you strike a piece of flint against a piece of steel, you can shave a red-hot spark off the steel.
However, moments later the surface of the steel itself barely feels warm. What happens to the
thermal energy in that surface?
c. When you rub a match on a matchbook, it suddenly bursts into flames. The principal source of
heat here is a chemical reaction in the match head. What purpose does the initial thermal energy
serve in starting this reaction?
d. What is a safety match? How does it work?
e. You might see a “cowboy match” in a movie light a match by rubbing it on the heel of their
boot. How does a match light that way.
4. Glass transmits the visib.
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane .pdf
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane is too small to fill the
need for prolonged signaling. What is an alternative source of diacylglycerol? Question 29
options: A. Acetyl CoA B. Cardiolipin C. Intracellular IP2 D. Phosphatidyl choline and
ethanolamine E. Triacylglycerols
Solution
D. Phosphatidyl choline and ethanolamine ..... there is a pthway called phosphatidylcholine
pathway of diacyglycerol formation...
memory based question no explination.
Steps Involved in documenting patient records efficiently in EHR. Yo.pdf
Steps Involved in documenting patient records efficiently in EHR. You can use process
diagrams, flow charts, etc. to support your description
Solution
Create an implementation team Configure the software Identify hardware needs Transfer data
Optimize pre-launch workflows Consider the room layout Initiate training Decide the launch
approach: “big bang” vs incremental Develop procedures for when hardware is down Develop a
mechanism for ongoing learning and improvement.
1. Let R be the event that it is a rainy day and let U be the event t.pdf
1. Let R be the event that it is a rainy day and let U be the event that I brought my umbrella to
the office. We know that P(R^c) = 19/20, P(U) = 3/40 and P(U | R) = 3/4. What is the probability
that it is a rainy day if you see my umbrella in the office? Write your answer in the box provided
and show any working below. [2 marks]
Solution.
Introduction to Quality Improvement Essentials
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
More Related Content
More from arihantplastictanksh
describe the three major categorical theories of language developmen.pdf
describe the three major categorical theories of language development,as listed below .consider
the emphasis each places on innate abilities versus environment influences.also attribute key
terms and theorist with one if the following categories. write a one page report on a language
theorist or researcher who asserts a position that is different from your own preferred notion.
.Behaviorist
.Nativist
.Interactionist
Solution
1). Behaviourist: This is proposed by the behavioural theorists Skinner. As per his theory,
children imitate what they see and hear and all behaviour is acquired by learning, so it can be
unlearned by either the positive reinforcement or negative reinforcement. Skinner proposed that
the speech of children is shaped by adults by reinforcing the babbling of infants.
2). Nativist: Nativist Noam Chomsky proposed a “LAD”, Language Acquisition Device, and
believed that children are born with certain innate skills of language learning, which determines
their speed of learning. They can learn the native language at a high speed and can improve their
grammatical skills without much effort. The same inheritance factor is responsible for the skill of
learning multiple languages in certain people.
3). Interactionist: Lev Vygotsky described the concept of “zone of proximal development,”
which explains how the children learn better from the other children, i.e. collaborative learning.
School environment play an important role in improving the intellectual skills of the children by
means of classroom teachings and also learning from the other children. Interaction with the
other school children also influences the development of communication skills in the society.
Children learn from the other children in a better way than do from the adults..
Compare the capabilities of the Microsoft Access, Microsoft SQL Serv.pdf
Compare the capabilities of the Microsoft Access, Microsoft SQL Server, Oracle’s MySQL, and
Oracle relational database management systems (RDBMSs). Your paper should discuss the
processing speeds, data storage capabilities, maximum users supported, platforms supported,
user interfaces, development tools, vendor support, and cost. Discuss and cite at least two
references in addition to our textbook. Your paper should be 3-5 pages in length (excluding title
and References pages)
Solution
Microsoft Access
Overview:
Microsoft Access is a part of Microsoft Office,
it is commercially available database in the market
Inexpensive/standard on most computers
users can create complex databases
database professionalas can use construct a database
customers of MS-Access:
It is mainly used in small corporate companies or IT Sectors with 1-80 endusers.
Features of MS-Access:
1.It is having GUI Interface for creating databases
2. A databae contains tables, forms, reports, queries, macros.
3. It facilitates autocontent wizards to build tables or forms or reports.
4. It acts as an interface to other DBMS using ODBC
5. It is used for small business companies
6. Provides security like password protection
7. Provides a Data dictionary
8. We can repair the database
9. We can create different views
10. External data can be imported into Access
11. We can create web pages based using the database
12. It has as built in Macro functions
13. It uses Structurered Query Language
14. We can create forms, reports etc by using Visual Basic Application programming
15. Provides Add in controls like calendars
16. It can merged into word and analysed with Excel etc.
Issues:
Security:
User level security is very difficult
Tuning:
It does not have the ability to split over multiple Hard Drives, multiple CPUs or to place tables
into memory.
Locking:
Basic handling of concurrent users Backup and recovery at basic level.
ANSI SQL standard often doesn\'t work,MS-Access has it\'s own modified version of ANSI
SQL.
MySQL
Overview
MySQL is a database engine. It has a command line interface that allows the creation of
database. It Requires Front-end applications to access it for end users. EX:- C#, PHP, Microsoft
ASP.Net.
Typical users
Small companies or workgroups, through to very large Internet databases with large numbers of
users
Ex:wikipedia,Moodle.
Features
1. Speed:One of the fastest databases available
2. Ease of use: when compared to larger databases such as Oracle Uses standard SQL
3. Capability: A multi-threaded server allowing many clients to connect at the same time Fully
networked for the Internet with built in security
4.Portability: Runs on a many operating systems and different hardware
5. Small size: when compared to other large databases e.g. Oracle
6. Availabliity and Cost: Open Source ,Free in most situations to use
7. Open distribution and source code: You can check how it works – if you have the knowledge.
8. interface to other DBMS’s using Open Database Connectivit.
case study of a female with a parasitic disease Here is a Microbiolog.pdf
case study of a female with a parasitic disease Here is a Microbiology student\'s story from her
point of view and in her own words. Some words were changed to aid in understanding, but the
context was not changed. This is an actual illness that happened to me whenIwas 18 years old
lving in Freetown, Sierra Leone, on the west coast of Africa. Here is some background
information tounderstand our living situation: My family and moved to the city as displaced
refugees due to several rebel attacks in my home town during the war. We rented afour bedroom
apartment for a family of over fifteen and shared two pot- hole toilets with over seventy people.
The house llved in was on top of asteep hilandat the bottom of the hill was a runni down the hill,
but ng stream of water where people in the neighborhood did laundry,inever went there were
many monitor lizards by the stream that would come up the hill sunny days to bask on the rocks.
My family and lused to dry our clothes on the rocks after washing them. My cook helped with
the laundry and a few times, my older sister bought snail meat from the market to because it was
cheap and I helped her prepare the food. on the last day of school holiday, had a sight headache
way home. When got home my mum gave me Tylenol (500mg) and I went to bed, but headache
did not stop That evening had a slight fever and some body aches. The headache continued and
was constant, with high fevers in the evenings and nights, and accompanied by chills. I have a
brother who is a doctor and was working in a private hospital. After a week of constant
headaches, and fevers my brother didamala test which was positive. I was gven since symptoms
got worse even after reatment for malaria, I was vomiting a lot, anemic, had abdominal pain.
received a blood transtusion with was very weak, could not walk and was dizzy all the time. One
day, was unconscious for a couple of hours and my family thought Iwas dying. This was after
my My to a stool found out another parastic disease along with malaria. I was given Braziguantel
for a day and after a days was feeling better and back my feet.ido not remember the exact three
months, submitted another stool sample for testing and it was negative.I was free from the
second parasite. Below is a picture of the eggs that the doctor would have seen upon microscopic
examination of the patient\'s stool. Distribution of this parasite is throughout Africa, but can also
be foundins America, the Caribbean, and Puerto Rico. what are the possible diagnoses for this
patient? What are your clues? What is the most likely diagnosis? Why? What are the sens and
symptoms? How is this disease transmitted? What are the causal agents? Which species s most
likely the causal agent in this case? wtyr what is the causal agent of malarla? what is the vector?
of the pathogen that causes this parastic disease? What is the classification the pathogen that
causes malaria? what is the classatication of the vector for malaria?
Solutio.
are marine multicellular protists belonging to the larger brown alg.pdf
are marine multicellular protists belonging to the larger brown algae. They are responsible for
most of the food production through the photosynthesis in regions where they occur. The cell
walls of fungi are made up of polysaccharides and In hornworts and liverworts which are non-
vascular plants help anchor the minute plant. All plants exhibit of generations of diploid
sporophytes with haploid gametophytes. 88. In plants the sporophyte generation does not
produce as a result of melosis. Circulatory pathway between the lungs and the heart Most
flatworms are meaning each individual containing both male and female sexual structures. solid
worms that lack a body caity Members of the class octopuses, squids, and nautilus are the most
intelligent of the invertebrates. Leeches along with other oligochaetes possess an organ called a
which secretes a cocoon specialized to receive the eggs. The respiratory organ in the Arachinid,
spider is called Breaking up of fat globules into smaller droplets by the action of bile salts in
addition to containing two pairs antennae, also have legs on their abdomen and thorax,
Echinoderms are symmetrical animals with a five-part body plan. Lymphatic vessels that aids
the absorption of lipids Birds like mammals are meaning that they can regulate their body
temperatures within close limits. All vertebrates have a heart and a(n) circulatory system of
blood vessels.
Solution
Answer:
84). Stramenopiles
A subgroup of chromalveolates, the stramenopiles, also referred to as heterokonts, includes
photosynthetic marine algae and heterotrophic protists. The unifying feature of this group is the
presence of a textured, or \"hairy,\" flagellum.
85). Chitin
86). Rhizoids
Rhizoids are the colorless rootlike projections of mosses, liverworts, and hornworts that anchor
them to the substrate.
87). Alternation
The multicellular haploid plant structure is called the gametophyte, which is formed from the
spore and give rise to the haploid gametes. The fluctuation between these diploid and haploid
stages that occurs in plants is called the alternation of generations.
89). Pulmonary circulation
Pulmonary circulation is the portion of the cardiovascular system which carries deoxygenated
blood away from the heart, to the lungs, and returns oxygenated (oxygen-rich) blood back to the
heart. The term pulmonary circulation is readily paired and contrasted with the systemic
circulation.
90). Hermaphrodites
Many flatworms are \"hermaphroditic\". It means that each individual has both male and female
\"gonads\", structures producing the \"gametes\" (sex cells, each with half the normal number of
chromosomes)
91). Acelomates
Acoelomate: an invertebrate lacking a coelom; especially : one belonging to the group
comprising the flatworms and nemerteans and characterized by bilateral symmetry and a
digestive cavity that is the only internal cavity..
8-9 Which gene (C or D) is downstream in the pathway based on the ep.pdf
8-9 Which gene (C or D) is downstream in the pathway based on the epistatic class for feeding
behavior? Gene C gene D Feeding Experiment: If methionine is added to the growth media of
these mutant strains, all of them can grow. Some of them can intermediates in the synthesis of
methionine are added. The intermediates include homocysteine, cysteine and cystathionine. In
the table below the growth behavior (+ or -) of the methionine auxotrophs are shown when each
strain is fed different compounds. Using this table, order the synthesis of intermediates from first
to last in the synthesis of methionine Order of intermediates: ---- rightarrow _________ ----
rightarrow _________ ---- rightarrow _________ methionine Above each arrow indicate where
each mutant (met A, B or Cor D) belongs. ---- rightarrow _________ ---- rightarrow
_________ ---- rightarrow _________ methionine What intermediate builds up in the met A
strain? _________ what intermediate builds up in the met C strain? __________ What
intermediate builds up in the met D strain?
Solution
1.The gene D is downstream in the process.
2.cysteine - cystathionine - homocysteine - methionine.
3.The first arrow represent strain B, the second arrow represent strain C, the third arrow
represent strain D and fourth arrow represent strain A..
4. Belief in God Religion Studies researchers were interested in ma.pdf
4. Belief in God: Religion Studies researchers were interested in making in- ferences about the
true proportion of Canadians who believe in some form of God. They randomly surveyed 100
Canadians and asked them whether or not they believed in God (‘Yes’ or ‘No’). 61 answered
‘Yes’. Below is the R output:
0.61
Solution
a) 61 [ANSWER]
b)
Ho: u = 0.5
Ha: u=/= 0.5 [ANSWER]
c) chi^2 = 4.84 [ANSWER]
d) chi^2(df = 1)
e)
(0.514403, 0.705597) [ANSWER]
f)
As this one is one tailed, then we divide the two tailed probability by 2,
P = 0.028/2 = 0.014 [ANSWER]
As P < 0.05, Reject Ho. [ANSWER]
g)
There is significant evidence that majority of Canadians believe in some form of God with P
value of 0.014..
18. Identify (at least 5) and explain their meanings of reducing ble.pdf
18. Identify (at least 5) and explain their meanings of reducing bleeding in concrete? 19. Identify
and explain the early year of Portland cement. When was it first produced in the US?
20. Aggregates are usually divided into how many groups?
21. Name and describe three chemical admixtures in concrete?
22. What are the major reasons for using chemical admixtures in concrete mixtures?
23. Why is concrete so widely used?
24. How can we produce air-entraining concrete?
25. What are concrete components?
26. What are footings? Name two types and show how they relate to the building?
27. What are two types of Concrete Buildings Systems?
28. What are the six categories of concrete wall systems in current use?
Solution
18) Bleeding in fresh concrete refers to the process where free water in the mix is pushed upward
to the surface due to the settlement of heavier solid particles such as cement and water. Some
bleeding is normal but excessive bleeding can be problematic. The way you work that bleed
water can affect the durability of your products.
The biggest factor in bleed water rates is the water-to-cement ratio. A higher ratio can lead to
excessive bleeding. The cement type and fine aggregates can play a role in determining the bleed
rate. The fewer fines you have in your mix, the more bleeding will occur. Factors also include
concrete height and pressure. The relationship between bleed water and concrete heights starts
off as linear, but eventually becomes nonlinear at increased heights.
Ways to reduce bleeding in concrete include:
19) Portland cement is a basic cement mixture and a fundamental ingredient for many common
cement applications. Because Portland cement is very common, it is also often called “Ordinary
Portland Cement” or simply “OPC.” Since the early 20th century, Portland cement has been used
internationally for a wide variety of applications including concrete projects, mortar pastes,
stucco decorations, and grout fillings
Roman cement was the predecessor to ordinary Portland cement. A crude form of Roman cement
was rediscovered by English engineer John Smeaton in 1756. The formula for Roman cement
was refined and patented in 1796 by James Parker.
Around 1811, James Frost developed British cement: a new way of processing cement that
became instrumental in making Portland cement. In 1824, the first form of Portland cement was
patented by English cement manufacturer Joseph Aspdin. Aspdin’s version of Portland cement
was further refined by his son, William, in 1843, and it closely resembled the ordinary Portland
cement we know today.
The United States imported Portland cement from Germany and England as early as 1868.
Between the 1970s and 1980s, the United States began manufacturing their Portland cement in
Michigan and Pennsylvania. Within a few years, most of the Portland cement used in the United
States was produced locally.
20) For a good concrete mix, aggregates need to be clean, hard, strong particles free of absorbed
chemicals o.
With enough money, energy, and political will, the nations of the wo.pdf
With enough money, energy, and political will, the nations of the world could build and launch a
space ship that will reach the nearest star, Alpha Centauri, and bring back news of life there:
A. Before this decade is over.
B. In about 50 years.
C. With current technology the trip would take a hundred thousand years.
D. With current technology we cannot get out of the Solar system, no matter how much time.
This question is rather difficult. I think it would take over 50 years because it may have to go to
each planet to look for life.
Solution
Its distance of 4.3 light-years equals 25.6 trillion miles away – nearly 300,000 times the distance
from the Earth to the sun. It would take over 100,000 years using conventional technology.
So the answer is C..
Which members of the truss are zero-force members Solutionass.pdf
Which members of the truss are zero-force members?
Solution
assuming all members to be weightless.
at the joint E, the only force possible in the vertical direction is due to DE. so the vertical
component of force in DE should be zero, because the joint E is at equilibrium. If the vertical
component is zero means there is no force in that member; it is a pin jointed member and force
will be along the bar and it is an inclined bar. if there is a horizontal component, there will be a
vertical component.
EF is a zero force member, because there is no force in x direction at E as discussed before.
at joint D sum of forces along x direction should be zero. Since the DE is a zero force member,
CD should also be a zero force member
DF should also be a zero force member because at D both others are zero force members and
there will be no member to offer reaction force.
CF will have some force since it will have to compensate the vertical 10KN. and all other
members will havesome force from there onwards. the values of force will depend on the lengths
of the members.
so the zero force members are CD, DE, DF, and FE.
Which THREE of the following statements about autotrophs and heterot.pdf
Which THREE of the following statements about autotrophs and heterotrophs on Earth are
TRUE?
Question 10 options: The answer is NOT 2, 6, 7 or 3, 5, 4
Heterotrophs that do not eat autotrophs every day will die in a short time.
Autotrophs depend on heterotrophs to oxidize sugar and release CO2 into the atmosphere.
The majority of heterotrophs on Earth do not use aerobic respiration as a form of energy
conversion.
Heterotrophs evolved on Earth before autotrophs.
The majority of autotrophs on Earth require aerobic respiration in order to survive.
Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support aerobic
respiration.
Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
There are no metabolic differences between autotrophs and heterotrophs.
Heterotrophs that do not eat autotrophs every day will die in a short time.
Autotrophs depend on heterotrophs to oxidize sugar and release CO2 into the atmosphere.
The majority of heterotrophs on Earth do not use aerobic respiration as a form of energy
conversion.
Heterotrophs evolved on Earth before autotrophs.
The majority of autotrophs on Earth require aerobic respiration in order to survive.
Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support aerobic
respiration.
Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
There are no metabolic differences between autotrophs and heterotrophs.
Solution
the correct statement would be :
4: because autotrophy is more complex than heterotrophy , the very first organisms were
heterotrophs because they could feed on the molecules surrounding them.
6: Heterotrophs are dependent on autotrophs to generate O2 from H2O in order to support
aerobic respiration.
because if the autotrophs do not produce oxygen then heterotrophs can\'t live. infact the earth\'s
atmosphere before autotrophs was without oxygen
7: Heterotrophs depend on autotrophs for conversion of light energy to chemical energy.
similarly, heterotrophs never had the ability to convert sunlight into chemical energy. they only
depended on autotrophs to produce food when the moleclar food was scarce..
What type of biometric error signifies that an authorized user has b.pdf
What type of biometric error signifies that an authorized user has been denied legitimate access?
A. Type I
B. Type II
C. Type III
D. Type IV
Solution
answer is a.type1
usually type 1 error raised when the autherized user with his credinals is rejected because of the
system fault are high accurate device,in this senario the authorized user is denied to legitimate
acces that meand user is declined to access the resources because of type 1 error.
What is an unintended medical consequences What is an example of on.pdf
What is an unintended medical consequences? What is an example of one?
Solution
Unintended medical consequences are those outcomes which were unforeseen and not intended
from a set of medical actions. Unintended medical consequences are threat to heath care and are
required to be given close attention and deep examination of the causes.
One of the example of unintended medical consequences is someone goes on diet and he eats
fruits only. Instead of lessening his weight, his weight actually increased..
What is the best explanation for large smooth regions on Saturns m.pdf
What is the best explanation for large smooth regions on Saturn\'s moon Enceladus?
A. Enceladus is so small that it never gets hit by meteors.
B. Water from sub-surface oceans can escape through geysers to refresh the surface.
C. Orbital resonances with Titan and Mimas prevent meteors from hitting Enceladus.
D. Saturn\'s magnetic field prevents meteors from hitting Enceladus.
E. Saturn\'s rings protect the moon from impacts.
Solution
answer is E.
Thirty students recorded the colors of their eyes, choosing from the.pdf
Thirty students recorded the colors of their eyes, choosing from the colors brown, blue, green,
hazel, and black. This data can be appropriately summarized in a Scatter plot Categorical
frequency distribution Ordinal frequency distribution Stem and leaf plot
Solution
Categorical frequency distribution because one variable is categorical (eye color).
The probability that a randomly selected adult owns an e-reader is 0..pdf
The probability that a randomly selected adult owns an e-reader is 0.26. The probability that a
randomly selected adult owns a tablet computer is 0.31. The probability that a randomly
selected adult owns both kinds of devices is 0.17.
The events E: a randomly selected adult owns an e-reader and T: a randomly selected adult
owns a tablet computer areAIndependent because P(E) x P(T) = P(E and T)BIndependent
because P(E) x P(T) P(E and T)CDependent because P(E) x P(T) = P(E and T)DDependent
because P(E) x P(T) P(E and T)Eimpossible to tell if independent or not due to insufficient
information
Solution
P(E) = P( e - reader) = 0.26
P(T) = P( tablet computer) = 0.31
P( E n T) = P(e -reader and tablet) = 0.17
P(E) x P(T) = 0.26*0.31 = 0.0806
[ANSWER] D. Dependent because P(E) x P(T) P(E and T).
The following tables relates degree of interest in political electio.pdf
The following tables relates degree of interest in political elections to education and age:
Test two hypotheses,
H1: given educational level, age and degree of interest are unrelated, and
H2: given age, educational level and degree of interest are unrelated.No high school
educationDegree of InterestUnder 45Over 45Great71217Little305652
Solution
Df = 3,4
p value = 0.1469
As p >0.05, accept null hypothesis that H0: given educational level, age and degree of interest
are unrelated, and.
1. Baking a potato takes a long time, even when cooking uses differe.pdf
1. Baking a potato takes a long time, even when cooking uses different forms of
thermodynamics. Even in a hot oven, the inside of a potato warms up very slowly.
a. What makes it hard for conduction to transfer heat to the center of the potato?
b. What makes it hard for convection to transfer heat to the center of the potato?
c. What makes it hard for radiation to transfer heat to the center of the potato?
d. Why does inserting a metal skewer through the potato help it to cook quickly
e. Why Can a Microwave do this job more efficiently and quicker?
f. What is a potato clock and why does it work?
2. An electric hot water heater takes cold water at its inlet pipe and delivers hot water at its outlet
pipe. Between these two pipes is a large water container. Many electric hot water heaters have
two separate heating elements: one near the top of the water container and one near the bottom.
Both heating elements project into the same hot water container inside the water heater. When
the top element is heating water at the top of the container, why doesn’t convection occur and
cause water at the bottom of the container to also become hot?
Convection dictates where the water pipes attach to the container. Where hot water should be
extracted from the container, and where should cold water be introduced into the container to
replace that hot water?
Why does the water heater’s bottom heating element operate more often and age more quickly
than its top heating element?
Why is it important to thermally insulate the hot water heater’s container?
Energy flows into the hot water heater as electricity. Since energy is conserved and can’t
accumulate forever inside the heater, it must leave somehow. At a time when the hot water is
being used, how does most of the energy leave the hot water heater?
How does “Instant Hot” water in a water cooler work differently?
g. After a new water heater is installed in the basement, the bathroom sink in a 2 story home
keeps banging and shooting out water. What might have cause this and what can be done to fix
this yourself?
3. Friction in starting fires
a. If you press a wooden peg against another piece of wood and spin the peg rapidly, it can
become hot enough to ignite. The peg produces thermal energy no matter how fast it spins, so
why is it important that it spin rapidly?
b. If you strike a piece of flint against a piece of steel, you can shave a red-hot spark off the steel.
However, moments later the surface of the steel itself barely feels warm. What happens to the
thermal energy in that surface?
c. When you rub a match on a matchbook, it suddenly bursts into flames. The principal source of
heat here is a chemical reaction in the match head. What purpose does the initial thermal energy
serve in starting this reaction?
d. What is a safety match? How does it work?
e. You might see a “cowboy match” in a movie light a match by rubbing it on the heel of their
boot. How does a match light that way.
4. Glass transmits the visib.
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane .pdf
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane is too small to fill the
need for prolonged signaling. What is an alternative source of diacylglycerol? Question 29
options: A. Acetyl CoA B. Cardiolipin C. Intracellular IP2 D. Phosphatidyl choline and
ethanolamine E. Triacylglycerols
Solution
D. Phosphatidyl choline and ethanolamine ..... there is a pthway called phosphatidylcholine
pathway of diacyglycerol formation...
memory based question no explination.
Steps Involved in documenting patient records efficiently in EHR. Yo.pdf
Steps Involved in documenting patient records efficiently in EHR. You can use process
diagrams, flow charts, etc. to support your description
Solution
Create an implementation team Configure the software Identify hardware needs Transfer data
Optimize pre-launch workflows Consider the room layout Initiate training Decide the launch
approach: “big bang” vs incremental Develop procedures for when hardware is down Develop a
mechanism for ongoing learning and improvement.
1. Let R be the event that it is a rainy day and let U be the event t.pdf
1. Let R be the event that it is a rainy day and let U be the event that I brought my umbrella to
the office. We know that P(R^c) = 19/20, P(U) = 3/40 and P(U | R) = 3/4. What is the probability
that it is a rainy day if you see my umbrella in the office? Write your answer in the box provided
and show any working below. [2 marks]
Solution.
More from arihantplastictanksh (20)
describe the three major categorical theories of language developmen.pdf
describe the three major categorical theories of language developmen.pdf
Compare the capabilities of the Microsoft Access, Microsoft SQL Serv.pdf
Compare the capabilities of the Microsoft Access, Microsoft SQL Serv.pdf
case study of a female with a parasitic disease Here is a Microbiolog.pdf
case study of a female with a parasitic disease Here is a Microbiolog.pdf
are marine multicellular protists belonging to the larger brown alg.pdf
are marine multicellular protists belonging to the larger brown alg.pdf
8-9 Which gene (C or D) is downstream in the pathway based on the ep.pdf
8-9 Which gene (C or D) is downstream in the pathway based on the ep.pdf
4. Belief in God Religion Studies researchers were interested in ma.pdf
4. Belief in God Religion Studies researchers were interested in ma.pdf
18. Identify (at least 5) and explain their meanings of reducing ble.pdf
18. Identify (at least 5) and explain their meanings of reducing ble.pdf
With enough money, energy, and political will, the nations of the wo.pdf
With enough money, energy, and political will, the nations of the wo.pdf
Which members of the truss are zero-force members Solutionass.pdf
Which members of the truss are zero-force members Solutionass.pdf
Which THREE of the following statements about autotrophs and heterot.pdf
Which THREE of the following statements about autotrophs and heterot.pdf
What type of biometric error signifies that an authorized user has b.pdf
What type of biometric error signifies that an authorized user has b.pdf
What is an unintended medical consequences What is an example of on.pdf
What is an unintended medical consequences What is an example of on.pdf
What is the best explanation for large smooth regions on Saturns m.pdf
What is the best explanation for large smooth regions on Saturns m.pdf
Thirty students recorded the colors of their eyes, choosing from the.pdf
Thirty students recorded the colors of their eyes, choosing from the.pdf
The probability that a randomly selected adult owns an e-reader is 0..pdf
The probability that a randomly selected adult owns an e-reader is 0..pdf
The following tables relates degree of interest in political electio.pdf
The following tables relates degree of interest in political electio.pdf
1. Baking a potato takes a long time, even when cooking uses differe.pdf
1. Baking a potato takes a long time, even when cooking uses differe.pdf
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane .pdf
The amount of phospahtidylinositol-4,5-bisphosphate in the membrane .pdf
Steps Involved in documenting patient records efficiently in EHR. Yo.pdf
Steps Involved in documenting patient records efficiently in EHR. Yo.pdf
1. Let R be the event that it is a rainy day and let U be the event t.pdf
1. Let R be the event that it is a rainy day and let U be the event t.pdf
Recently uploaded
Introduction to Quality Improvement Essentials
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
The Art Pastor's Guide to Sabbath | Steve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Instructions for Submissions thorugh G- Classroom.pptx
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
Template Jadual Bertugas Kelas (Boleh Edit)
Jadual Bertugas kelas dalam bentuk softcopy PowerPoint. Cikgu boleh download >> edit >> print >> laminate. Semoga bermanfaat.
Polish students' mobility in the Czech Republic
Polish students mobility to the Czech Republic within eTwinning project "Medieval adventures with Marco Polo"
Palestine last event orientationfvgnh .pptx
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
Operation Blue Star - Saka Neela Tara
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Ethnobotany and Ethnopharmacology ......
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
2024.06.01 Introducing a competency framework for languag learning materials ...
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Recently uploaded (20)
The Art Pastor's Guide to Sabbath | Steve Thomason
The Art Pastor's Guide to Sabbath | Steve Thomason
Instructions for Submissions thorugh G- Classroom.pptx
Instructions for Submissions thorugh G- Classroom.pptx
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
Basic phrases for greeting and assisting costumers
Basic phrases for greeting and assisting costumers
Home assignment II on Spectroscopy 2024 Answers.pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
2024.06.01 Introducing a competency framework for languag learning materials ...
2024.06.01 Introducing a competency framework for languag learning materials ...
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptx
Explain the benefit of designing a foundation with LRFD as opposed to.pdf
- 1. Explain the benefit of designing a foundation with LRFD as opposed to ASD Solution The LRFD is certainly an improvement over the ASD. It takes better account of variability in both loading and resistance. LRFD is a reliability based design. Even before taking my reliability based design class, I always had my doubt in applying a single factor of safety for an output derived from inputs of varying reliability. The one disadvantage of LRFD is the lack of sufficient statistical data to select appropriate factors in certain specific cases, but still better than ASD.