The document discusses various technologies used in a research and filmmaking process. A scanner was used to scan documents for a blog and to share research with remote group members. A PC was used primarily for research, which helped broaden the authors' knowledge of how difficult research can be. A tripod was used to keep the camera stable during filming to avoid unprofessional, unbelievable shakes and allowed for different shot types and angles. A flip cam was useful for interviews and questionnaires because videos could be uploaded directly from the camera, making it quicker than a standard camera. A Mac was used for post-production to cut, add effects, and edit the film into an opening, allowing for more creativity than editing on a PC.

1. The scanner was used in our researching process TYPE THE SIDEBAR CONTENT. Aalmost all IS A
The PC was involved in SIDEBAR of STANDALONE
and it came in handy as we needed to scan some
SUPPLEMENT TO THE MAIN We used the PC IS
our pre-production. DOCUMENT. IT OFTEN ALIGNED ON THE
documents to put on our blog but it was also helpful
in showing other group members some research we LEFT ORfor research mostly and from doing AT THE
RIGHT OF THE PAGE, OR LOCATED The tripod was used to keep the camera TOP OR BOTTOM. you need a
To make a film USE
had made if they were not close to us but had a THE DRAWING TOOLS TAB TO CHANGE THE
this we have broadened our
stable because if there were a lot of FORMATTING OF THE that this
camera and I believe
computer. SIDEBAR TEXT BOX.of how hard researchers
shakes in our film then it would look isn’t the best camera because the
knowledge very unprofessional and not believable visual quality isn’t very good but
in film must work. at all. The tripod also helped with a
it did its job and it also has some
range of shot that would have been a lot
harder without it for example with the features that I like for example
tripod we could tilt it up and down for the flap on the side can rotate
low angle and high angle shots. 360 degrees around so the person
who is acting can see if they are
placed in the sot right.
Evaluation Question 6 (Part 1): What have you learnt
about technologies from the process of constructing this
product?
The flip cam was very useful for interviews We used the MAC for almost all of our
and questionnaires and compared to the post - production. With the Mac we were
camera we used for filming, it was a lot able to cut and add effects to our film, and
quicker to upload videos because the videos make into the opening we wanted
could be uploaded straight from the camera. because I believe if we had edited our film
with the programs on a PC it would not
have been as good because with the MAC
you are allowed to be a lot more creative.