5. Procedures
Step 1: Get four 4x6 strips of paper
and tape it using the double sided
tape on both side (back to back) and
do it with the other 4.
4/7/2013 5
6. Step 2: Make the X part using the 2
thin strips on the top of the 4x6
paper.
4/7/2013 6
7. Step 3: Hold the entire thing, flip it
and tape the small pieces of thin
strips of paper.
4/7/2013 7
8. Step 4: Lay the other 4x6 paper on
the top of the thin strips. Tape it.
4/7/2013 8
9. Step 5: Get the other 2 strips and lay
it horizontally above the 4x6 paper
and do Step 3.
4/7/2013 9
10. Step 6: Put the excess strips
underneath the 4x6 paper and Tape
it. Make sure it is attached.
4/7/2013 10