Energy Saver F6 is an additive designed to improve the efficiency of central heating systems by reducing nucleated boiling bubbles and smoothing flow surfaces. It works by laying down long chain molecules in the system. While it improves efficiency, it does not provide antifreeze or corrosion protection like Fernox's heat transfer fluids, so it must be used with a Fernox Protector F1 inhibitor. Energy Saver F6 can save up to 1.2% of energy consumption annually on a scaled boiler and 0.8% on an unscaled boiler.
Method Statement for Powerflushing Domestic Systems
Energy Saver F6
1. Energy Saver F6
Questions and answers
What is Energy Saver F6?
Fernox Central Heating Energy Saver F6 is an
innovative new chemical water treatment product.
Independently tested, Energy Saver F6 has been
developed to improve heat transfer efficiency and
contribute to lower energy usage within traditional
central heating systems.
Is it available in other formats such as
Superconcentrate gels or aerosols?
The Energy Saver F6 is currently available as a
500 ml liquid product only.
Does it differ from a renewable heat transfer
fluid such as Solar S1, or the HP range? If so,
how does it differ?
Energy saver is a 500 ml additive product which
treats 100 litre system. It is specifically designed
to improve the efficiency of heating systems
and does NOT provide antifreeze and system
protection like Solar S1 or HP Heat Transfer
products.
How does Energy Saver F6 work?
The performance improvement arises as a result
of laying down long chain molecules within the
heating system. This has a dual effect of reducing
the size of nucleated boiling bubbles that form
on the heat exchanger (which add an additional
insulation layer to the heat exchanger surface)
and smoothing the internal flow surfaces of the
heating system, thereby reducing drag.
www.fernox.com
2. Do I need to use an inhibitor with Energy Saver F6? Can Energy Saver F6 be left in the system permanently?
Yes, a Fernox Protector F1 should be used with the Yes, the product is designed to be left in the system.
Energy Saver F6 as the product is not designed for
system protection. Does Energy Saver F6 need to be topped up annually to
maintain the fuel saving?
What differentiates it from other products on the market? It is advisable to top up the system annually if the system
As Energy Saver F6 is a pioneering product there are no has been drained or has required topping up in the last
comparable products. twelve months.
How much fuel consumption is likely to be saved over Is it possible to overdose the system with Energy Saver
the course of a year? F6?
Energy Saver F6 can save up to 1.2% of energy No.
consumption on a scaled boiler and 0.8% on an
un-scaled boiler. Is Energy Saver F6 a non hazardous product and is it
as environmentally friendly as other products in the
What is the pay back period if Energy Saver F6 is ‘F’ range?
used in the system? Yes, it is phosphate, nitrate/nitrite and EDTA free and has
For a typical household the payback period could be a non hazardous classification.
one year.
What size of system does Energy Saver F6 treat?
What does this saving equate to at today’s energy 100 litre system or up to 10 single panel radiators.
prices?
The energy consumption savings equate to £14.18 saving Is it compatible with all metals and materials commonly
per annum for a scaled boiler and £9.45 per annum for found in central heating systems including aluminium?
an un-scaled boiler, based on typical energy consumption Yes, as with all Fernox products Energy Saver F6 is suitable
figures1 and typical unit gas price of 7.16p/kWh. for use with all makes and brands of boiler.
1
Ofgem Typical Energy Consumption Figures 2011 Factsheet 96 – ofgem.gov.co.uk
www.fernox.com
Fernox, Cookson Electronics, Forsyth Road, Sheerwater, Woking, Surrey GU21 5RZ Technical Helpline: +44 (0)870 870 0362 Email: sales@fernox.com