2. Identify basic electrical components such as:
Lamps, motors and buzzers.
Resistors, LDRS, capacitors and inductors.
Diodes.
Understand the applications of each
component.
Understanding components’ coding.
Eng. Rose Hasan
3. Introduction
Basic Electrical Components
Components Coding
Class and Lab Activities
Eng. Rose Hasan
4. Have you ever opened your personal
computer (PC) or your radio from the inside?
Eng. Rose Hasan
10. Resistance Coding:
Resistors are specified by their:
▪ Resistance Value
▪ Tolerance
It is indicated by: color code method.
Resistance is measured in _____ ?_____.
Eng. Rose Hasan
11. Most resistors have 4 bands:
▪ The 1st band gives the first digit.
▪ The 2nd band gives the second
digit.
▪ The 3rd band indicates the
number of zeros.
▪ The 4th band gives the tolerance
Eng. Rose Hasan
16. http://samengstrom.com/nxl/3660/4_band_r
esistor_color_code_page.en.html
Search the net for resistor color code
calculator and post it on my Wiki….
http://mywork-iat.wikispaces.com
Eng. Rose Hasan
17. Capacitor Coding: Capacitors are usually specified by
three quantities:
_______________________
_______________________
_______________________
A number code is often used on small capacitors where
printing is difficult.
The 1st number ______________________
The 2nd number ______________________
The 3rd number is _______________________
The code gives the capacitance in _________________
Remark: Ignore any letters - they just indicate tolerance and
voltage rating.
Eng. Rose Hasan
18. You have a capacitor with "104" stamped on
it.
The first two digits are: ______
The third digit is: _______
The forth digit is:__________
So, C=__________________
Eng. Rose Hasan
19. State the capacitance value for the following
capacitors:
Eng. Rose Hasan
30. First Band Second Band Third band Forth band Resistance
color and color and color and color and
value value value value
Value stamped on the Capacitance
capacitor
Eng. Rose Hasan
32. Connect the following circuit:
Eng. Rose Hasan
33. Rotate the spindle of the potentiometer.
What do you observe on the light brightness?
----------------------------------------------------------
----------------------------------------------------------
State an application of potentiometers?
-----------------------------------------------------------
-------------------------------------------------------
How can you know the resistance range of
the potentiometer ???
Eng. Rose Hasan
35. Connect the following circuit:
Eng. Rose Hasan
36. Expose the LDR to light. What happen to the
brightness of the lamp?
---------------------------------------------------------------------
------------------------ ------------------------------------------
Put the LDR in the dark. What happen to the
brightness of the lamp?
---------------------------------------------------------------------
------------------------------------------------------------------
State some applications of LDRs.
---------------------------------------------------------------------
------------------------------------------------------------------
Eng. Rose Hasan
37. Write your opinion about today’s class on
my Wiki …
Be prepared to a Quiz next Class in module
#3.
Next Class: Start with Module #4
Eng. Rose Hasan