This document provides specifications for an embedded controller type LED called the EC 15. It is a 1.5x1.5x0.65mm LED that contains an integrated control circuit. The document outlines its product overview, main features, pin configuration, mechanical dimensions, electrical characteristics, reliability testing standards, and cautions for use regarding dust, cleaning, moisture and ESD protection.
This document provides specifications for the SK6812RGB-P8 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, pin configurations, electrical parameters, timing diagrams, data transmission methods, and typical application circuits. The LED has integrated control circuitry, supports 256 level grayscaling, and can be cascaded with data transmission speeds up to 800 Kbps. Proper use requires keeping the LED free of dust and avoiding organic solvents.
The document describes the specifications of the SK6812-RGBXP8-XX integrated light source LED chip. It is a 5.5x5.0x1.6mm top SMD type LED with 0.2 watts power. It has an integrated control circuit and light emitting circuit that allows each lighting element to act as a pixel controlled by a digital interface. The LED has low driving voltage, high brightness, scattering angle, good consistency, low power and long life. Main applications include full color LED strings, modules, lighting and electronic displays.
This document provides the specifications for the SK6812-P6 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, data transmission methods, and packaging standards. The LED has integrated control circuitry and RGB chips in a single SMD package to provide intelligent control of pixels with uniform color mixing. It is suitable for applications such as full color LED strips and modules.
This document provides specifications for the SK6812 integrated light source LED. It includes details on the product such as its dimensions, pin configuration, electrical parameters, typical application circuit, and packaging standard. The SK6812 features an integrated control circuit and RGB chips in a single SMD package. It uses a uni-polar NRZ data protocol for cascading multiple pixels in a line. Precautions are provided for storage, cleaning, and reflow soldering to protect the LED.
This document provides specifications for the SK6805 integrated light source LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, data transmission methods, and packaging standards. The SK6805 is an LED with an integrated control circuit that allows for intelligent control of individual pixels in applications such as full color LED strips and screens. It has a 5.5x5.0x1.6mm package and operates from 3.5-5.5V while providing high brightness, scattering angle, consistency, and long life.
This document specifies the SK6812RGBX-XX integrated light source LED. It includes:
1. Details on the LED's construction as a top SMD chip with integrated control circuit and pixel-level control of color and brightness.
2. Application examples including string lights, pixel screens, and more.
3. Specifications covering electrical characteristics, timing, data transmission, and color properties.
This document provides specifications for the SK6822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, timing diagrams, data transmission methods, and packaging standards. The SK6822 is an LED control circuit and light emitting circuit integrated into a single controlled LED source. It uses patented PWM technology to guarantee high consistency in pixel color output.
Sk6812 datasheet Digital programmable strip with magic colorJason Gong
This document provides specifications for the SK6812 integrated light source intelligent control chip-on-top SMD type LED. Key details include:
- It is a 0.2W top SMD type LED with integrated control circuit and RGB chips.
- Each LED acts as a pixel that can be individually controlled for color and intensity via a digital interface.
- It uses a 24-bit data protocol for signal transmission between LEDs connected in a chain.
- Specifications include electrical parameters, timing diagrams, data structures, and packaging.
This document provides specifications for the SK6812RGB-P8 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, pin configurations, electrical parameters, timing diagrams, data transmission methods, and typical application circuits. The LED has integrated control circuitry, supports 256 level grayscaling, and can be cascaded with data transmission speeds up to 800 Kbps. Proper use requires keeping the LED free of dust and avoiding organic solvents.
The document describes the specifications of the SK6812-RGBXP8-XX integrated light source LED chip. It is a 5.5x5.0x1.6mm top SMD type LED with 0.2 watts power. It has an integrated control circuit and light emitting circuit that allows each lighting element to act as a pixel controlled by a digital interface. The LED has low driving voltage, high brightness, scattering angle, good consistency, low power and long life. Main applications include full color LED strings, modules, lighting and electronic displays.
This document provides the specifications for the SK6812-P6 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, data transmission methods, and packaging standards. The LED has integrated control circuitry and RGB chips in a single SMD package to provide intelligent control of pixels with uniform color mixing. It is suitable for applications such as full color LED strips and modules.
This document provides specifications for the SK6812 integrated light source LED. It includes details on the product such as its dimensions, pin configuration, electrical parameters, typical application circuit, and packaging standard. The SK6812 features an integrated control circuit and RGB chips in a single SMD package. It uses a uni-polar NRZ data protocol for cascading multiple pixels in a line. Precautions are provided for storage, cleaning, and reflow soldering to protect the LED.
This document provides specifications for the SK6805 integrated light source LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, data transmission methods, and packaging standards. The SK6805 is an LED with an integrated control circuit that allows for intelligent control of individual pixels in applications such as full color LED strips and screens. It has a 5.5x5.0x1.6mm package and operates from 3.5-5.5V while providing high brightness, scattering angle, consistency, and long life.
This document specifies the SK6812RGBX-XX integrated light source LED. It includes:
1. Details on the LED's construction as a top SMD chip with integrated control circuit and pixel-level control of color and brightness.
2. Application examples including string lights, pixel screens, and more.
3. Specifications covering electrical characteristics, timing, data transmission, and color properties.
This document provides specifications for the SK6822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, dimensions, pin configurations, electrical parameters, timing diagrams, data transmission methods, and packaging standards. The SK6822 is an LED control circuit and light emitting circuit integrated into a single controlled LED source. It uses patented PWM technology to guarantee high consistency in pixel color output.
Sk6812 datasheet Digital programmable strip with magic colorJason Gong
This document provides specifications for the SK6812 integrated light source intelligent control chip-on-top SMD type LED. Key details include:
- It is a 0.2W top SMD type LED with integrated control circuit and RGB chips.
- Each LED acts as a pixel that can be individually controlled for color and intensity via a digital interface.
- It uses a 24-bit data protocol for signal transmission between LEDs connected in a chain.
- Specifications include electrical parameters, timing diagrams, data structures, and packaging.
The document provides specifications for an LED product. It includes 3-4 sentences summarizing key details:
The SK6812-3535RGBX-XX-P6 is a top SMD LED with integrated control circuit that provides RGBW color and dimming control. It measures 3.5x3.7x1.9mm and operates from 3.7-5.5V with a maximum power of 0.25W. The document provides details on its electrical parameters, timing diagrams, data transmission method, and application examples.
This document provides specifications for the XT1511 integrated light source LED, including:
- Product overview of the XT1511 smart LED that integrates a control circuit and light emitting circuit.
- Main applications are full color LED lights and displays.
- Mechanical dimensions and pin configurations are provided, along with electrical parameters, timing waveforms, and data transmission methods for controlling multiple LEDs.
The document provides specifications for the XT1511-5mA integrated light source LED, including:
1) The LED has integrated control circuitry and RGB chips in a single package to form pixels with uniform color mixing.
2) It is suitable for applications like string lights, full color modules, and scene lighting.
3) Key parameters include a maximum forward voltage of 3.5-5.5V, static power consumption under 1mA, and data transmission speed up to 800Kbps.
The document provides specifications for the XT1511RGB-P8 integrated light source intelligent control chip-on-top SMD type LED. It is a 5.5x5.0x1.6mm top SMD type 0.2Watt power LED with an integrated control circuit and light emitting circuit that controls each lighting element as a pixel. The document outlines its main applications, descriptions, pin configurations, electrical parameters, timing diagrams and typical application circuits.
This document provides specifications for the SK6812MINI integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, dimensions, pin configurations, electrical parameters, timing diagrams, data transmission methods and structure, application circuits, performance graphs, and packaging standards. The LED has integrated control circuitry and RGB chips to allow for intelligent control of color and brightness at the pixel level through a digital interface.
The document provides specifications for the SK6812-XX integrated light source LED. It describes the LED as a 5.5x5.0x1.6mm top SMD type with 0.2 watts of power and integrated control circuitry. The LED uses pulse width modulation and data forwarding to control color and brightness across cascaded pixels with transmission distances over 10 meters. It provides pinouts, electrical parameters, timing diagrams, application examples, and color temperature ratings.
This document provides specifications for the XT1511RGBX-XX integrated light source LED. Some key details:
- It is a 5.5x5.0x1.6mm top SMD chip-on-top LED with a 0.25 watt power and integrated control circuit.
- The LED has red, green, blue and white color elements that can each be independently controlled through a 32-bit data protocol to mix colors.
- It is designed for applications like full color lights, modules, and displays through its ability to intelligently control individual pixel intensities.
XT1506 have 6pin, which is similar with sk6812, and also very suitable for magic color led project.
Like use in led strip, led project.
bill_xt@Jercio.com
APA107 Pixel LED, white and RGB color, APA107 5050 version is available, APA107 3535 will be present next year.
APA107 is a really cool product to replace APA102, but with more nice characteristic, much more great than SK9822, SK9822 just one clone product.
APA107 white color 3000k 4000k 6000k pixel LED SMD ChipJason Gong
APA102/APA102C white LED has already stopped producing, but SK9822 with lower PWM frequency,so APA107W White is the best choice with higher PWM frequency, the cheapest LED than APA102/APA102C/SK9822.
APA107W is a type ic for the three-colour White Dimming control strip and
string, This ic using the CMOS process to provide three-colour White LED output
driver to adjust the output with 256 grayscale and 32 brightness adjustment, APA107 with 2 signal output way, one is the clock, another is data, the clock and data are synchronized, so that the crystal cascade piece of output movement is synchronized.
The document compares the WS2815 and GS8208 12V pixel LEDs. The WS2815 was one of the earlier 12V pixel LEDs and has undergone several updates to improve stability. The GS8208 is a clone of the WS2815 but with additional features. Both LEDs use a single data line for signal transmission between pixels and can support an unlimited number of cascaded pixels. The main differences are the WS2815 has a refresh rate of 2KHz while the GS8208 has a higher refresh rate of 8KHz and also includes gamma correction.
This document provides the specifications for the SK9822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, applications, description, dimensions, pin configurations, parameters, features and application notes. The SK9822 is a two-wire transmission LED with integrated control circuit and RGB chips that provides 256 level grayscale and 32 brightness levels of adjustment. Precautions for use include ESD sensitivity, cleaning, moisture protection, storage conditions and heat management during reflow soldering.
APA102/APA102C has already stopped producing, but SK9822 with lower PWM frequency,so APA107 is the best choice with higher PWM frequency, the cheapest LED than APA102/APA102C/SK9822.
General Description
APA107 pixel LED SMD is a type ic for the three-color RGB Diming control strip and string ,This ic using the CMOS process to provide three-color RGB LED output driver to adjust the output with 256 gray scale and 32 brightness adjustment ,APA107 with 2 signal output way , one is clock ,another is data, the clock and data is synchronizated ,so that the crystal cascade piece of output movement is sychronizated .
Feature
CMOS process,low voltage ,low consumption
Synchronization of two-lane
Choose positive output or negative RGB three-color LED output
8 bit(256 level) color set ,5bit(32 level) brightness adjustment
Build-20ma constant current output
With self-detection signal build in support for continuous oscillation PWM
output ,can be maintained static screen
This document provides the specifications for the XT9822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, description, mechanical dimensions, pin configuration, general information, maximum ratings, electrical parameters, feature descriptions, typical application circuit, LED performance graphs, and packaging standard. It also provides application notes on dust and cleaning, moisture proof packaging, storage, reflow soldering characteristics, heat generation, and electrostatic discharge.
This 12 page document provides specifications for the SK6812 SIDE integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, pin configurations, dimensions, electrical characteristics, typical performance graphs, packaging standards, and application notes. The document aims to clearly communicate the technical specifications and proper usage of this LED to customers and users.
Available with diameter 16, 19, 22 or 25mm bushing, CP series sensory switches are extremely easy to use and ideal for repetitive applications (no operating force). Their IK10 robustness and unlimited life are perfect for self-service applications.
WS2813 is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a DC5V voltage programmable constant current control part, which achieves highly consistent color effect.
pixel SK6812 rgb led specification datasheet from hanron lightingHanronLighting
This document provides specifications for the SK6812 5.4x5.0x1.6mm 0.2W intelligent external control surface mount SMD LED. It describes the product overview, main application fields, pin configuration, electrical parameters, reliability testing standards, and typical application circuit. The document contains specifications for 16 items regarding the LED in 3 or less sentences.
The document provides specifications for an LED product. It includes 3-4 sentences summarizing key details:
The SK6812-3535RGBX-XX-P6 is a top SMD LED with integrated control circuit that provides RGBW color and dimming control. It measures 3.5x3.7x1.9mm and operates from 3.7-5.5V with a maximum power of 0.25W. The document provides details on its electrical parameters, timing diagrams, data transmission method, and application examples.
This document provides specifications for the XT1511 integrated light source LED, including:
- Product overview of the XT1511 smart LED that integrates a control circuit and light emitting circuit.
- Main applications are full color LED lights and displays.
- Mechanical dimensions and pin configurations are provided, along with electrical parameters, timing waveforms, and data transmission methods for controlling multiple LEDs.
The document provides specifications for the XT1511-5mA integrated light source LED, including:
1) The LED has integrated control circuitry and RGB chips in a single package to form pixels with uniform color mixing.
2) It is suitable for applications like string lights, full color modules, and scene lighting.
3) Key parameters include a maximum forward voltage of 3.5-5.5V, static power consumption under 1mA, and data transmission speed up to 800Kbps.
The document provides specifications for the XT1511RGB-P8 integrated light source intelligent control chip-on-top SMD type LED. It is a 5.5x5.0x1.6mm top SMD type 0.2Watt power LED with an integrated control circuit and light emitting circuit that controls each lighting element as a pixel. The document outlines its main applications, descriptions, pin configurations, electrical parameters, timing diagrams and typical application circuits.
This document provides specifications for the SK6812MINI integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, dimensions, pin configurations, electrical parameters, timing diagrams, data transmission methods and structure, application circuits, performance graphs, and packaging standards. The LED has integrated control circuitry and RGB chips to allow for intelligent control of color and brightness at the pixel level through a digital interface.
The document provides specifications for the SK6812-XX integrated light source LED. It describes the LED as a 5.5x5.0x1.6mm top SMD type with 0.2 watts of power and integrated control circuitry. The LED uses pulse width modulation and data forwarding to control color and brightness across cascaded pixels with transmission distances over 10 meters. It provides pinouts, electrical parameters, timing diagrams, application examples, and color temperature ratings.
This document provides specifications for the XT1511RGBX-XX integrated light source LED. Some key details:
- It is a 5.5x5.0x1.6mm top SMD chip-on-top LED with a 0.25 watt power and integrated control circuit.
- The LED has red, green, blue and white color elements that can each be independently controlled through a 32-bit data protocol to mix colors.
- It is designed for applications like full color lights, modules, and displays through its ability to intelligently control individual pixel intensities.
XT1506 have 6pin, which is similar with sk6812, and also very suitable for magic color led project.
Like use in led strip, led project.
bill_xt@Jercio.com
APA107 Pixel LED, white and RGB color, APA107 5050 version is available, APA107 3535 will be present next year.
APA107 is a really cool product to replace APA102, but with more nice characteristic, much more great than SK9822, SK9822 just one clone product.
APA107 white color 3000k 4000k 6000k pixel LED SMD ChipJason Gong
APA102/APA102C white LED has already stopped producing, but SK9822 with lower PWM frequency,so APA107W White is the best choice with higher PWM frequency, the cheapest LED than APA102/APA102C/SK9822.
APA107W is a type ic for the three-colour White Dimming control strip and
string, This ic using the CMOS process to provide three-colour White LED output
driver to adjust the output with 256 grayscale and 32 brightness adjustment, APA107 with 2 signal output way, one is the clock, another is data, the clock and data are synchronized, so that the crystal cascade piece of output movement is synchronized.
The document compares the WS2815 and GS8208 12V pixel LEDs. The WS2815 was one of the earlier 12V pixel LEDs and has undergone several updates to improve stability. The GS8208 is a clone of the WS2815 but with additional features. Both LEDs use a single data line for signal transmission between pixels and can support an unlimited number of cascaded pixels. The main differences are the WS2815 has a refresh rate of 2KHz while the GS8208 has a higher refresh rate of 8KHz and also includes gamma correction.
This document provides the specifications for the SK9822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, applications, description, dimensions, pin configurations, parameters, features and application notes. The SK9822 is a two-wire transmission LED with integrated control circuit and RGB chips that provides 256 level grayscale and 32 brightness levels of adjustment. Precautions for use include ESD sensitivity, cleaning, moisture protection, storage conditions and heat management during reflow soldering.
APA102/APA102C has already stopped producing, but SK9822 with lower PWM frequency,so APA107 is the best choice with higher PWM frequency, the cheapest LED than APA102/APA102C/SK9822.
General Description
APA107 pixel LED SMD is a type ic for the three-color RGB Diming control strip and string ,This ic using the CMOS process to provide three-color RGB LED output driver to adjust the output with 256 gray scale and 32 brightness adjustment ,APA107 with 2 signal output way , one is clock ,another is data, the clock and data is synchronizated ,so that the crystal cascade piece of output movement is sychronizated .
Feature
CMOS process,low voltage ,low consumption
Synchronization of two-lane
Choose positive output or negative RGB three-color LED output
8 bit(256 level) color set ,5bit(32 level) brightness adjustment
Build-20ma constant current output
With self-detection signal build in support for continuous oscillation PWM
output ,can be maintained static screen
This document provides the specifications for the XT9822 integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, description, mechanical dimensions, pin configuration, general information, maximum ratings, electrical parameters, feature descriptions, typical application circuit, LED performance graphs, and packaging standard. It also provides application notes on dust and cleaning, moisture proof packaging, storage, reflow soldering characteristics, heat generation, and electrostatic discharge.
This 12 page document provides specifications for the SK6812 SIDE integrated light source intelligent control chip-on-top SMD type LED. It includes details on the product overview, main applications, descriptions, pin configurations, dimensions, electrical characteristics, typical performance graphs, packaging standards, and application notes. The document aims to clearly communicate the technical specifications and proper usage of this LED to customers and users.
Available with diameter 16, 19, 22 or 25mm bushing, CP series sensory switches are extremely easy to use and ideal for repetitive applications (no operating force). Their IK10 robustness and unlimited life are perfect for self-service applications.
WS2813 is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a DC5V voltage programmable constant current control part, which achieves highly consistent color effect.
pixel SK6812 rgb led specification datasheet from hanron lightingHanronLighting
This document provides specifications for the SK6812 5.4x5.0x1.6mm 0.2W intelligent external control surface mount SMD LED. It describes the product overview, main application fields, pin configuration, electrical parameters, reliability testing standards, and typical application circuit. The document contains specifications for 16 items regarding the LED in 3 or less sentences.
pixel rgb SK6812 MINI 3535 led specification datasheet from hanron lightingHanronLighting
This is the specification & datasheet of pixel rgb SK6812 MINI 3535 led, please download to see all detail.
You can also contact Hanron expert at: www.ledstriplightings.com .
Now there is a new ic built-in SK6812 side 4020 led,SK6812 IC 4020RGB SMD side firing Led,it can achieve single pixel control,point by point scanning,reach magic rgb chase,horse racing,gradual change and other effect.It has 5MA(SK6805 SIDE) and 12MA(SK6812 SIDE).
LC8812B MINI3535 is a smart LED control circuit and light emitting circuit in one controlled LED source,which has the shape of a 3535 LED chip. Each lighting element is a pixel.
The document describes an intelligent LED component called the LC8805B-2020. It is a 2.0x2.0mm SMD LED with control and light emitting circuits integrated into a single chip. Each LED acts as a pixel that can be controlled individually. The LED uses a data protocol for cascading and transmitting signals between pixels without limiting the number of cascaded pixels. It has features such as low power consumption and a long lifespan.
This document provides specifications for the SK6805-2427 integrated light source intelligent control chip-on-top SMD type LED. Key details include:
1. It is a 2.4x2.7x1.1mm top SMD LED with 0.1 watt power and integrated control circuit.
2. The control circuit uses PWM technology to guarantee consistent color across pixels. It can cascade multiple pixels through its data shaping and forwarding circuit.
3. Electrical parameters, timing diagrams, data transmission protocols, application examples, and packaging standards are provided. Maximum ratings, pin functions, and mechanical dimensions are also specified.
LC8808B have 2 data signal , which have Breakpoint continued function . when one led is broken , the signal can be transported the next led without lost .unless 2 consecutive led is broken .this Technology Ensure the quality of the overall project is guaranteed.
NS107S pixel led, the upgrade of APA107ssuser7b8607
This document provides specifications and usage notes for the NS107S RGB LED. Key details include:
- The LED is used in SMD RGB strips and can be controlled for color and brightness levels.
- To prevent moisture damage, the LEDs are packed in aluminum bags with desiccant and should be stored in dry conditions. They should be soldered within an hour of opening the bag.
- The silicone coating provides optical and reliability benefits but can attract dust, so the LEDs should be kept dust-free before and after installation. Only isopropyl alcohol should be used for cleaning.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
1. Document No.: SPC / EC 15 Rev. No.: 021 / 18
ELECTROSTATIC
SENSITIVE DEVICES
EC 15
SPECIFICATION
EMBEDDED CONTROLLER TYPE LED
Document No.: SPC/ EC 15
Model No.: EC 15
Description: 1.5x1.5x0.65mm Type 0.1Watt Power Embedded
Controller LED
Rev. No.: 02
Date: 2018-09-18
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
2. Document No.: SPC / EC 15 Rev. No.: 022 / 18
EMBEDDED CONTROLLER TYPE LED
Model: EC 15
1. Product Overview :
EC 15 is an embedded control type LED light source integrating control circuit and light-emitting
circuit. It contains intelligent digital interface data latch signal shaping and amplifying drive circuit,
power supply voltage regulator circuit, built-in constant current circuit and high precision RC
oscillator. The output driver adopts the patented PWM technology, which effectively ensures the high
color consistency of the light in the pixel.
The data protocol being used is unipolar RZ communication mode. The 24-bit data is transmitted
from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an
internal data latch, the remaining data is passed through the internal amplification circuit and sent out
on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic
shaping forwarding technology makes the number of cascaded pixels without signal transmission only
limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving),
high brightness, scattering angle, good consistency, low power, and long life. The control circuit is
integrated in the LED above.
2. Main Features :
● Easy To Design
● Easy To Build
● Easy To Program
3. Description:
● EC LED internal integrated high quality external control line serial cascade constant current IC;
●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform
distortion will not guarantee a line;
●The built-in power on reset and reset circuit, the power does not work;
●gray level adjusting circuit (256 level gray scale adjustable);
● red drive special treatment, color balance;
● line data transmission;
● plastic forward strengthening technology, the transmission distance between two points over 10M;
●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
3. Document No.: SPC / EC 15 Rev. No.: 023 / 18
6. Product welding plate size
5. PIN configuration
NO. Symbol Function description
1 DIN Control data signal input
2 VDD Power supply LED
3 DOUT Control data signal output
4 GND Ground
4. Mechanical Dimensions:
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted
IC
IC
IC
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
4. Document No.: SPC / EC 15 Rev. No.: 024 / 18
EC 15-XX
EC 15: The default is RGB chips with IC integration
7. General Information
XX: Refers to the internal special
code to distinguish different
8. Absolute Maximum Ratings(Ta=25℃,VSS=0V) :
Parameter Symbol Range Unit
Power supply voltage VDD +3.5~+5.5 V
Logic input voltage VIN -0.5~VDD+0.5 V
Working temperature Topt -40~+85 ℃
Storage temperature Tstg -50~+150 ℃
ESD pressure(HBM) VESD 4K V
ESD pressure(DM) VESD 200 V
9. Electrical/Optical Characteristics:
Color
EC 15
Dominate wavelength(nm) Luminance(mcd) luminous flux(lm)
Red 620-630 200-350 0.7-1.5
Green 515-530 500-700 1.5-3.0
Blue 460-475 100-200 0.3-0.7
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
5. Document No.: SPC / EC 15 Rev. No.: 025 / 18
10. The electrical parameters (unless otherwise specified, TA=-20 ~ +70 ℃, VDD=4.5 ~ 5.5V,
VSS=0V):
Parmeter
Symb
ol
Min
Typic
al
Max Unit Test conditions
The chip
supply voltage
VDD --- 5.2 --- V ---
The signal
input flip
threshold
VIH 0.7*VDD --- --- V
VDD=5.0V
VIL --- --- 0.3*VDD V
The frequency
of PWM
FPWM --- 1.2 --- KHZ ---
Static power
consumption
IDD --- 1 --- mA ---
11. The dynamic parameters (Ta=25 ℃):
Parameter Symbol Min Typical Max Unit Test conditions
The speed of data
transmission
fDIN --- 800 --- KHZ
The duty ratio of 67%
(data 1)
DOUT transmission
delay
TPLH --- --- 500 ns
DIN→DOUT
TPHL --- --- 500 ns
IOUT Rise/Drop
Time
Tr --- 100 --- ns VDS=1.5
IOUT=5mATf --- 100 --- ns
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
6. Document No.: SPC / EC 15 Rev. No.: 026 / 18
12. The data transmission time :
13. Timing waveform:
Connection mode:
Input code:
Name Min.
Standard
value
Max. Unit
T Code period 1.20 -- -- µs
T0H 0 code, high level time 0.2 0.3 0.4 µs
T0L 0 code, low level time 0.8 -- -- µs
T1H 1 code, high level time 0.58 0.6 1.0 µs
T1L 1 code, low level time 0.2 -- -- µs
Trst
Reset code,low level
time
>80 -- -- µs
1. The protocol uses a unipolar zeroing code. Each symbol must have a low level. Each
symbol in this protocol starts with a high level. The high time width determines the "0" or
"1" code. .
2. When writing programs, the minimum symbol period is 1.2μs.
3. The high time of “0” code and “1” code should be in accordance with the
stipulated range in the above table. The low time requirement of “0” code and “1”
code is less than 20μs.
DIN DIN DINDO DO DO
PIX1
D1 D2 D3 D4
PIX2 PIX3
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
7. Document No.: SPC / EC 15 Rev. No.: 027 / 18
14. The method of data transmission:
Note: the D1 sends data for MCU, D2, D3, D4 for data forwarding automatic shaping cascade circuit.
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
8. Document No.: SPC / EC 15 Rev. No.: 028 / 18
15. The data structure of 24bit:
G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4
R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0
Note: high starting, in order to send data (G7 - G6 - ...... ..B0)
16. The typical application circuit:
Product signal input and output must be connected in series Protection resistor R1, R1 depends on the size of the cascade
lamp beads, the greater the number of cascade, the smaller R1, the general recommended value between 200-2KΩ,
usually recommended Worth about 500 euros;
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
9. Document No.: SPC / EC 15 Rev. No.: 029 / 18
16. Standard LED Performance Graph:
200 40 60 80 100
20%
0.00
40%
60%
80%
100%
120%
Thermal Pad Temperature(T=25°C)
NormalizedLuminousFlux
Thermal PadTemperaturevs. RelativeLight Output
120
450400 500 550 600 650
20%
0.00
40%
60%
80%
100%
Wavelength(nm)
RelativeEmissionDistribution
WavelengthCharacteristics
700 750 800
7590 60 45 30 15 0 0.40.2 0.6 0.8 1.0
0
30°
60°
90°
Typical RadiationPattern 120°
RadiationAngle
RED
GREENBLUE
BLUE/GREEN
RED
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
10. Document No.: SPC / EC 15 Rev. No.: 0210 / 18
17. Packaging Standard:
The reel pack is applied in SMD LED. The LEDs are packed in cardboard boxes after packaging in normal or anti-
electrostatic bags. cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The
boxes are not water resistant and therefore must be kept away from water and moisture.
1.75
2 .0 4 .0
8.0
3.5
4 .0
C A T H O D E ID E N T IF IC A T IO N
C O V E R T A P E
C A R R IE R T A P E
R E E L (1 7 8 x 1 2 m m )
E S D P O L Y E T H Y L E N E B A G
E L E C T R O S TA TIC
D E V IC E S
O B S E R V E P R E C A U T IO N S
S E N S I TIV E
T A P E F E E D D IR E C T IO N
L A B E L S K E T C H IN G
P R O D U C T N O .: E C 1 5
Q U A N T IT Y .: 5 0 0 0 P C S
Lot No.: N S 20180 6 2 1 001 -1
DATE:2018-06 - 21
C A R D B O A R D (IN N E R 4 0 B A G M A X .)
? 1 .5
E C 1 5
(IN N E R 5 0 0 0 p c s L E D M A X )
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
NEWSTAR
11. Document No.: SPC / EC 15 Rev. No.: 0211 / 18
19. Reliability Test :
NO. Test item Test Conditions Reference Criterion
1 Thermal Shock
100 ± 5°C ~ -40°C ±
5°C
30min~30min 300 cycles
MIL-STD-202G 0/22
2
High Temperature
Storage
Ta= +100ºC 1000hrs
JEITA ED-4701
200 201
0/22
3
Low Temperature
Storage
Ta= -40ºC 1000hrs
JEITA ED-4701
200 202
0/22
4
High Temperature
High Humidity
Storage
Ta=60ºC RH=90% 1000hrs
JEITA ED-4701
100 103
0/22
5
Temperature
Cycle
-55ºC~25ºC~100ºC~25ºC
30min~5min~30min~5mi
n
100 cycles
JEITA ED-4701
100 105
0/22
6
Resistance to
Soldering Heat
Tsld = 260°C, 10sec. 3
times
JEITA ED-4701
300 301
0/22
7
Room temp Life
Test
25°C, IF: Typical
current , 1000hrs
JESD22-A
108D
0/22
Criteria for Judging the Damage:
Item Symbol Test Condition
Limit
Min Max
Luminous
Intensity
IV
DC=5V, Typical
current
Init. Value*0.7 ---
Resistance to
Soldering Heat
---
DC=5V, Typical
current
No dead lights or obvious
damage
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
12. Document No.: SPC / EC 15 Rev. No.: 0212 / 18
EC LED Application Notes
1. Features
The Purposes of making Newstar’s customers and users to have a clear understanding on the ways how to
use the LED.
2. Description
Generally. The LED can be used the same way as other general purposed semiconductors. When using
Newstar’s EC LED, the following precautions must be taken to protect the LED.
3. Cautions
3.1. Dust & Cleaning
3.2. Shipment and storage
EC LED is a humidity sensor, the LED packaging in the aluminum bag is to avoid the LED in the transport
and storage of moisture absorption, in the bag with a desiccant to absorb the moisture inside the bag. If
the LED absorbs water vapor, then in the LED over reflow, in the high temperature state, into which the
rapid expansion of gas vaporization and produce a greater internal stress, so that the material crack,
layered or damaged bonding wire , Resulting in product failure.
TOP SMD LED with a moisture-proof anti-static aluminum foil bag packaging, handling should avoid the
process of squeezing, piercing the case of bags, and do the necessary anti-static protective measures;
promise products on the line before the leak or broken, Please stop the use of direct use of the product; ,
Resulting in product failure;
Such as before the material has been found to prevent moisture-proof aluminum foil bags have been
opened, damaged, perforated can be returned to the original re-dehumidification, must not be on-line use;
The humidity level of this product is LEVEL 4.
This emitter has a silicone surface, There are many benefits to the silicone surface in terms of optical
properties and improved reliability. However, silicone is a softer material and prone to attract dust. While a
minimal amount of dust and debris on the LED will not cause significant reduction in illumination, steps
should be taken to keep the emitter free of dust.
These include keeping the LEDs in the manufacturer’s package prior to assembly and storing assemblies in
an enclosed area after installing the emitters.
Surface condition of this device may change when organic solvents such as trichloroethylene or acetone
were applied.
Avoid using organic solvent, it is recommended that isopropyl be used as a solvent for cleaning the LEDs.
When using other solvents, it should be confirmed beforehand whether the solvents will dissolve the
package and the resin of not.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence as ultrasonic
cleaning on the LEDs depends on factors such as ultrasonic power. Baking time and assembled condition.
Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will occur.
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
13. Document No.: SPC / EC 15 Rev. No.: 0213 / 18
3.3. Storage before unsealing
In order to avoid the moisture barrier caused by the reliability of the failure problem, need to do LED products SMT pre-
storage and moisture-proof measures;
If the moisture-proof bag is not open, the EC LED element will be stored for less than 4 months at <30 ° C / 60% RH;
(Note: The label date is the same and the packing is not leaked. Discoloration under the premise of use; for different
moisture-proof grade materials or packaging to save the time there is a certain difference, the specific preservation time
to the specification book or packaging tips prevail); recommended in the unassembled do not open the moisture before
the bag;
Moisture proof
Workshop lifespan after open the packaging
Time condition
LEVEL1 unlimited ≦30℃/85 % RH
LEVEL2 1 year ≦30℃/60 % RH
LEVEL2a 4 Weeks ≦30℃/60 % RH
LEVEL3 168 Hours ≦30℃/60 % RH
LEVEL4 72 Hours ≦30℃/60 % RH
LEVEL5 48 Hours ≦30℃/60 % RH
LEVEL5a 24 Hours ≦30℃/60 % RH
LEVEL6 Take off and use immediately ≦30℃/60 % RH
Chart 1:Definition of material’s MSL prescribed by IPC/JEDECJ-STD-020
3.4. Control after the packing bag is opened
After opening the moisture-proof bag, please read the moisture-proof bag inside the humidity indicator card in the
moisture-proof beads into pink to confirm moisture in the moisture bag is too much, according to the color of the ball to
determine whether the bag material on-line operation; And the material after opening the package should be strictly
controlled in the table 1 as specified by the maximum temperature and humidity and operating time allowed, as long as
the material exposed in the environment described in Table 1, the need to accumulate its use in the workshop time.
After opening the packaging bag and attaching it to the PCB board, the welding work should be completed as soon as
possible. It is not recommended to stick the material on the PCB. It will not be placed in the workshop for a long time
without SMT furnace operation Bad lead;
3.5. Definition of humidity card
Open the package after the EC LED bag inside the humidity card color instructions are as follows:
A. If the moisture card 10% of the moisture-proof beads into pink, other files for the blue, this situation, LED can be used
directly;
B. If the humidity card moisture-proof beads 10%, 20% at all become pink, in fact, the file is blue, this situation, the need
for low-temperature components dehumidification;
C. If the humidity card moisture-proof beads 10%, 20%, 30% more than three are turned pink, in this case, the customer
needs to return the material to our company for high humidity dehumidification, re-packaging before use;
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
14. Document No.: SPC / EC 15 Rev. No.: 0214 / 18
3.6. Unwanted material moisture-proof storage and moisture-proof control of finished material
Humidity indicator DO not change color
Humidity indicator tums pink in 10% 20%
Humidity indicator tums pink in 10% 20% 30%
If a roll of SMDs is not used at once and the plant temperature and humidity are within the defined conditions (<30 ° C /
60% RH), the exposure time of the element in the air does not exceed 24H, the remaining material should be carried
out together with the desiccant Vacuum sealed, otherwise, the material must be low-wet baking dehumidification;
dehumidified material can be re-packaged to re-start the calculation time;
Perform moisture control on SMDs components that have been assembled
A. After the components have been assembled to the PCB board no longer need to go through the high temperature
process or reflow process, it will not be special treatment;
B. Do not need to do the necessary dehumidification work before making the appropriate protection process, bake in 70
℃ ± 5 ℃ oven baking for less than 24 hours, To remove the product in the detection and aging process exposed to
moisture in the air to avoid the product in the protective treatment, the package in the material surface of the moisture
will slowly invade the product, will cause product failure;
C. For products that require secondary SMT process or high temperature, they should be subjected to the necessary
moisture treatment before secondary welding, after exposure to (<30 ° C / 60% RH) , The maximum length of not more
than 24H, Connaught second high temperature process separated by a long time, then a welding material must be
necessary dehumidification work (70 ℃ ± 5 ℃ oven baking no less than 24 hours), and then pumping Vacuum storage;
or the first product stored in the oven or with a desiccant container, the second high-temperature process before doing
dehumidification work (70 ℃ ± 5 ℃ in the oven baking no less than 24 hours) , To ensure that products in the high
temperature before the process is not damp;
Low-temperature baking conditions: 70 ° C ± 5 ° C baking not less than 24 hours high temperature baking conditions:
130 ° C ± 5 ° C baking not less than 6 hours (lamp beads must be split into particles)
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
15. Document No.: SPC / EC 15 Rev. No.: 0215 / 18
3.7. Reflow Soldering Characteristics
In testing,Newstar has found EC LEDs to be compatible with JEDEC J -STD-020C,using the parameters listed below. As a
general guideline Newstar recommends that users follow the recommended soldering profile provided by the manufacturer
of solder paste used.
Note that this general guideline is offered as a starting point and may require adjustment for certain PCB designs and
Configurations of reflow soldering equipment.
Temperature(°C)
Times
ts
(Preheat)
LL
s max
MIN
T 25°C to Peak
amp-up
Critical Zone TL to TP
Ramp down
Profile Feature Lead-Based Solder Lead-Free Solder
Average Ramp-Up Rate (Ts max to Tp ) 3℃/second max. 3℃/second max.
Preheat: Temperature Min (Ts min) 100℃ 150℃
Preheat: Temperature Min (Ts max) 150℃ 200℃
Preheat: Time ( ts min to ts max ) 60-120 seconds 60-180 seconds
Time Maintained Above: Temperature (TL) 183 ℃ 217 ℃
Time Maintained Above: Time (t L) 60-150 seconds 60-150 seconds
Peak/Classification Temperature (T P) 215 ℃ 240 ℃
Time Within 5℃ of Actual Peak Temperature ( tp) <10 seconds <10 seconds
Ramp-Down Rate 6℃/second max. 6℃/second max.
Time 25 ℃ to Peak Temperature <6 minutes max. <6 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
16. Document No.: SPC / EC 15 Rev. No.: 0216 / 18
Thermal design of the end product is of paramount importance. Please consider the heat generation of the
LED when making the system design. The coefficient of temperature increase per input electric power is
affected by the thermal resistance of the circuit board and density of LED placement on the board, as well as
components. It is necessary to avoid in tense heat generation and operate within the maximum rating given in
this specification. The operating current should be decided after considering the ambient maximum
temperature of LEDs
The maximum working humidity of the product is not easy to exceed 40 ° C ( ≤ 40 ° C, refers to the product
pin at the operating temperature)
3.8 Heat Generation:
4.0 Moisture Proof Package
3.9 Electrostatic Discharge & Surge Current :
Electrostatic discharge (ESD) or surge current (EOS) may damage LED.
Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of
LED.
IC device signal input and output ports must be connected in series protection resistor to prevent surge or
static shock port caused by product failure;
All devices, equipment and machinery must be properly grounded.
It is recommended to perform electrical test to screen out ESD failures at final inspection.
It is important to eliminate the possibility of surge current during circuitry design.
Cannot take any responsibility for any trouble that are caused by using the LEDs at conditions exceeding
our specifications.
The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking
directly at the LEDs with unaided eyes for more than a few seconds.
The formal specification must be exchanged and signed by both parties before large volume purchase begins.
The appearance and specifications of the product may be modified for improvement without notice.
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR
17. Document No.: SPC / EC 15 Rev. No.: 0217 / 18
Change History
FCN No. Date Rev. No. Changes/Reason of changes
2018-06-21 01 Initial Document
2018-09-18 02 Correction of bead parameters
Items Signatures Date
Note
02Correction of bead parameters
Prepared by Alice Wu 2018-09-18
Checked by
Approved by
FCN#
Address : 7/ F, Bl l ock A YuShan Industrial Park ,Songb ai Road,ShiYan Town,B ao'An | CN-5 1810 8 Shenz hen
Tel: 0755-29405686 www.newstar-ledstrip.com info@ newstarleds.com
NEW STAR LED CO., LIMITED
NEWSTAR