Designed elements SIS100
•
0 likes•85 views
This document provides brief descriptions of various components that make up the SIS100 system including a connection box, sliding support, power line, busbar compensation, and helium line. The document outlines several key elements of the SIS100 setup across 3 pages but does not go into detail about the purpose or function of each component.
Report
Share
Report
Share
Download to read offline
Recommended
123
This document lists various items including moto, bicicleta, casa, llanta, carro, pantalon, saco, patineta, computador, and atari. It provides the tariff rate in Spanish and dollar, euro, colon, yen, and pound values for each item with moto having the highest tariff rate at 25% and saco the lowest at 3%.
Moving Lids Direction Effects on MHD Mixed Convection in a Two-Sided Lid-Driv...
Magnetohydrodynamic (MHD) mixed convection flow of Cu–water nanofluid inside a two-sided lid-driven square enclosure with adiabatic horizontal walls and differentially heated sidewalls has been investigated numerically. The effects of moving lids direction, variations of Richardson number, Hartmann number, and volume fraction of nanoparticles on flow and temperature fields have been studied. The obtained results show that for a constant Grashof number (), the rate of heat transfer increases with a decrease in the Richardson and Hartmann numbers. Furthermore, an increase of the volume fraction of nanoparticles may result in enhancement or deterioration of the heat transfer performance depending on the value of the Hartmann and Richardson numbers and the configuration of the moving lids. Also, it is found that in the presence of magnetic field, the nanoparticles have their maximum positive effect when the top lid moves rightward and the bottom one moves leftward.
Natural Convection and Entropy Generation in Γ-Shaped Enclosure Using Lattice...
This work presents a numerical analysis of entropy generation in Γ-Shaped enclosure that was submitted to the natural convection process using a simple thermal lattice Boltzmann method (TLBM) with the Boussinesq approximation. A 2D thermal lattice Boltzmann method with 9 velocities, D2Q9, is used to solve the thermal flow problem. The simulations are performed at a constant Prandtl number (Pr = 0.71) and Rayleigh numbers ranging from 103 to 106 at the macroscopic scale (Kn = 10-4). In every case, an appropriate value of the characteristic velocity is chosen using a simple model based on the kinetic theory. By considering the obtained dimensionless velocity and temperature values, the distributions of entropy generation due to heat transfer and fluid friction are determined. It is found that for an enclosure with high value of Rayleigh number (i.e., Ra=105), the total entropy generation due to fluid friction and total Nu number increases with decreasing the aspect ratio.
Numerical Analysis of Inlet Gas-Mixture Flow Rate Effects on Carbon Nanotube ...
The growth rate and uniformity of Carbon Nano Tubes (CNTs) based on Chemical Vapor Deposition (CVD)
technique is investigated by using a numerical model. In this reactor, inlet gas mixture, including xylene as
carbon source and mixture of argon and hydrogen as carrier gas enters into a horizontal CVD reactor at
atmospheric pressure. Based on the gas phase and surface reactions, released carbon atoms are grown as CNTs on the iron catalysts at the reactor hot walls. The effect of inlet gas-mixture flow rate, on CNTs growth rate and its uniformity is discussed. In addition the velocity and temperature profile and also species concentrations throughout the reactor are presented.
Investigation of the Effect of Nanoparticles Mean Diameter on Turbulent Mixed...
Abstract
Turbulent mixed convection of a nanofluid (water/Al2O3, Φ=.02) has been studied numerically. Two-phase
mixture model has been used to investigate the effects of nanoparticles mean diameter on the flow parameters. Nanoparticles distribution at the tube cross section shows that the particles are uniformly dispersed. The non-uniformity of the particles distribution occurs in the case of large nanoparticles and/or high value of the Grashof numbers. The study of particle size effect showed that the effective Nusselt number and turbulent intensity increases with the decreased of particle size.
Advertising and-promotion
This document provides guidelines for small businesses on planning and managing advertising and promotion activities. It discusses [1] choosing from various advertising methods based on their cost-effectiveness for the business's goals, [2] using data from past campaigns to inform decisions on where to focus advertising spending, and [3] the importance of clear communication that customers can understand.
MHD Nanofluid Flow Analysis in a Semi-Porous Channel by a Combined Series Sol...
In this paper, Least Square Method (LSM) and Differential Transformation Method (DTM) are used to solve the problem of laminar nanofluid flow in a semi-porous channel in the presence of transverse magnetic field. Due to existence some shortcomings in each method, a novel and efficient method named LS-DTM is introduced which omitted those defects and has an excellent agreement with numerical solution. In the present study, the effective thermal conductivity and viscosity of nanofluid are calculated by Maxwell–Garnetts (MG) and Brinkman models, respectively. The influence of the three dimensionless numbers: the nanofluid volume friction, Hartmann number and Reynolds number on non-dimensional velocity profile are considered. The results show that velocity boundary layer thickness decrease with increase of Reynolds number and nanoparticle volume friction and it increases as Hartmann number increases.
Recommended
123
This document lists various items including moto, bicicleta, casa, llanta, carro, pantalon, saco, patineta, computador, and atari. It provides the tariff rate in Spanish and dollar, euro, colon, yen, and pound values for each item with moto having the highest tariff rate at 25% and saco the lowest at 3%.
Moving Lids Direction Effects on MHD Mixed Convection in a Two-Sided Lid-Driv...
Magnetohydrodynamic (MHD) mixed convection flow of Cu–water nanofluid inside a two-sided lid-driven square enclosure with adiabatic horizontal walls and differentially heated sidewalls has been investigated numerically. The effects of moving lids direction, variations of Richardson number, Hartmann number, and volume fraction of nanoparticles on flow and temperature fields have been studied. The obtained results show that for a constant Grashof number (), the rate of heat transfer increases with a decrease in the Richardson and Hartmann numbers. Furthermore, an increase of the volume fraction of nanoparticles may result in enhancement or deterioration of the heat transfer performance depending on the value of the Hartmann and Richardson numbers and the configuration of the moving lids. Also, it is found that in the presence of magnetic field, the nanoparticles have their maximum positive effect when the top lid moves rightward and the bottom one moves leftward.
Natural Convection and Entropy Generation in Γ-Shaped Enclosure Using Lattice...
This work presents a numerical analysis of entropy generation in Γ-Shaped enclosure that was submitted to the natural convection process using a simple thermal lattice Boltzmann method (TLBM) with the Boussinesq approximation. A 2D thermal lattice Boltzmann method with 9 velocities, D2Q9, is used to solve the thermal flow problem. The simulations are performed at a constant Prandtl number (Pr = 0.71) and Rayleigh numbers ranging from 103 to 106 at the macroscopic scale (Kn = 10-4). In every case, an appropriate value of the characteristic velocity is chosen using a simple model based on the kinetic theory. By considering the obtained dimensionless velocity and temperature values, the distributions of entropy generation due to heat transfer and fluid friction are determined. It is found that for an enclosure with high value of Rayleigh number (i.e., Ra=105), the total entropy generation due to fluid friction and total Nu number increases with decreasing the aspect ratio.
Numerical Analysis of Inlet Gas-Mixture Flow Rate Effects on Carbon Nanotube ...
The growth rate and uniformity of Carbon Nano Tubes (CNTs) based on Chemical Vapor Deposition (CVD)
technique is investigated by using a numerical model. In this reactor, inlet gas mixture, including xylene as
carbon source and mixture of argon and hydrogen as carrier gas enters into a horizontal CVD reactor at
atmospheric pressure. Based on the gas phase and surface reactions, released carbon atoms are grown as CNTs on the iron catalysts at the reactor hot walls. The effect of inlet gas-mixture flow rate, on CNTs growth rate and its uniformity is discussed. In addition the velocity and temperature profile and also species concentrations throughout the reactor are presented.
Investigation of the Effect of Nanoparticles Mean Diameter on Turbulent Mixed...
Abstract
Turbulent mixed convection of a nanofluid (water/Al2O3, Φ=.02) has been studied numerically. Two-phase
mixture model has been used to investigate the effects of nanoparticles mean diameter on the flow parameters. Nanoparticles distribution at the tube cross section shows that the particles are uniformly dispersed. The non-uniformity of the particles distribution occurs in the case of large nanoparticles and/or high value of the Grashof numbers. The study of particle size effect showed that the effective Nusselt number and turbulent intensity increases with the decreased of particle size.
Advertising and-promotion
This document provides guidelines for small businesses on planning and managing advertising and promotion activities. It discusses [1] choosing from various advertising methods based on their cost-effectiveness for the business's goals, [2] using data from past campaigns to inform decisions on where to focus advertising spending, and [3] the importance of clear communication that customers can understand.
MHD Nanofluid Flow Analysis in a Semi-Porous Channel by a Combined Series Sol...
In this paper, Least Square Method (LSM) and Differential Transformation Method (DTM) are used to solve the problem of laminar nanofluid flow in a semi-porous channel in the presence of transverse magnetic field. Due to existence some shortcomings in each method, a novel and efficient method named LS-DTM is introduced which omitted those defects and has an excellent agreement with numerical solution. In the present study, the effective thermal conductivity and viscosity of nanofluid are calculated by Maxwell–Garnetts (MG) and Brinkman models, respectively. The influence of the three dimensionless numbers: the nanofluid volume friction, Hartmann number and Reynolds number on non-dimensional velocity profile are considered. The results show that velocity boundary layer thickness decrease with increase of Reynolds number and nanoparticle volume friction and it increases as Hartmann number increases.
Using Lattice Boltzmann Method to Investigate the Effects of Porous Media on ...
1) The document describes a numerical study using the lattice Boltzmann method to investigate heat transfer from a solid block inside a porous media-filled channel.
2) The effects of porosity and thermal conductivity ratio on fluid flow patterns and temperature fields were examined.
3) Higher porosity and lower thermal conductivity ratio resulted in lower fluid temperatures, as increased porosity reduces the effective thermal conductivity and thus heat transfer between the fluid and solid block.
Bloque 01. tema 02.- Un mundo desigual
Este documento describe las características demográficas del mundo, España y Andalucía. Explica que la población mundial ha crecido rápidamente en los últimos siglos, pero que actualmente existe una gran desigualdad entre países desarrollados y subdesarrollados. Mientras los países desarrollados tienen bajas tasas de natalidad y mortalidad, los países pobres tienen altas tasas de natalidad que conducen a un rápido crecimiento poblacional. También analiza las migraciones globales y sus consecuencias. En cuanto a
Mesoscopic simulation of incompressible fluid flow in porous media
Abstract
Lattice Boltzmann method is used to simulate cavity driven fluid flow in porous media. A square cavity is considered with the top
lid moving with uniform velocity and other sides kept stationary. Simulation is carried out for values of Darcy number ranging
from 10-6 to10-2 at Reynolds number 10 and 100. Influence of Darcy number and Reynolds number is investigated on velocity
profiles and the streamline plots. Half-way bounce back boundary conditions are employed in the numerical simulation. The
numerical code is first verified with the results available in the literature and then used to simulate the Newtonian fluid flow in
porous media. The Darcy number and the Reynolds number were observed to have great influence on the flow properties and the
location of the primary vortex. Simulation was carried out for a 100100 mesh grid and a fine agreement is established theories
in incompressible fluid flow.
Keywords: Lattice Boltzmann method, incompressible flow, porous media
Neisseria m.
This document discusses the epidemiology of Neisseria meningitidis, the bacteria that causes meningococcal disease. It outlines that epidemiology studies the frequency and distribution of diseases in populations and can help identify at-risk groups and devise prevention strategies. The document notes that N. meningitidis carriers are usually asymptomatic but that in some cases it can invade the bloodstream and cause meningitis. It discusses factors like season, geography, and serogroup that influence meningococcal disease outbreaks worldwide. The highest incidence is in sub-Saharan Africa due to environmental factors like dust storms. Vaccination programs have reduced rates of some serogroups in countries like the US and UK.
Quest for Progress (GDC Europe 2016)
Anthony Pecorella's talk at GDC Europe covering the math and design of idle games. This talk goes into details about formulas and progression systems as well as tools available for balancing these systems. Bonus sections include a quick look at stupidly-large numbers and a summary of some recent notable additions to the idle game genre.
You can try the spreadsheet models out at http://kon.gg/idle-math-spreadsheets.
GPC presentation
GP Consulting assists medical device startups in commercializing in Europe. Led by Morten Gunvad with 20 years experience in sales and marketing with international organizations, GP Consulting delivers customized sales strategies and helps clients address challenges and opportunities in commercialization. They work with clients in pre-launch, launch, and post-launch phases to choose the right sales channels, find partners, understand local markets, build value propositions, and expand successfully into new territories.
GDC 2014 Core Games, Real Numbers: Going Cross-Platform
Kongregate has been sharing great data on web games for years - now they're launching mobile games and are ready to start sharing iOS and Android numbers as well. Learn how monetization differs by platform, country, and device, what type of CPIs to expect for different kinds of games, and what's most important in making your free-to-play mobile game a success.
Bloque 02. tema 02. LOS FACTORES FÍSICOS DE LOS ESPACIOS NATURALES
Este documento trata sobre los factores físicos de los espacios naturales. Explica las principales formas del relieve como las llanuras, mesetas y montañas, y cómo se modifican lentamente debido a agentes externos como el agua y el viento. También describe la distribución de los océanos y continentes en la Tierra, así como la atmósfera y sus capas. Por último, define el tiempo, clima y zonas climáticas, señalando cómo la temperatura y precipitaciones varían según la cantidad de sol que recibe cada región
More Related Content
Viewers also liked
Using Lattice Boltzmann Method to Investigate the Effects of Porous Media on ...
1) The document describes a numerical study using the lattice Boltzmann method to investigate heat transfer from a solid block inside a porous media-filled channel.
2) The effects of porosity and thermal conductivity ratio on fluid flow patterns and temperature fields were examined.
3) Higher porosity and lower thermal conductivity ratio resulted in lower fluid temperatures, as increased porosity reduces the effective thermal conductivity and thus heat transfer between the fluid and solid block.
Bloque 01. tema 02.- Un mundo desigual
Este documento describe las características demográficas del mundo, España y Andalucía. Explica que la población mundial ha crecido rápidamente en los últimos siglos, pero que actualmente existe una gran desigualdad entre países desarrollados y subdesarrollados. Mientras los países desarrollados tienen bajas tasas de natalidad y mortalidad, los países pobres tienen altas tasas de natalidad que conducen a un rápido crecimiento poblacional. También analiza las migraciones globales y sus consecuencias. En cuanto a
Mesoscopic simulation of incompressible fluid flow in porous media
Abstract
Lattice Boltzmann method is used to simulate cavity driven fluid flow in porous media. A square cavity is considered with the top
lid moving with uniform velocity and other sides kept stationary. Simulation is carried out for values of Darcy number ranging
from 10-6 to10-2 at Reynolds number 10 and 100. Influence of Darcy number and Reynolds number is investigated on velocity
profiles and the streamline plots. Half-way bounce back boundary conditions are employed in the numerical simulation. The
numerical code is first verified with the results available in the literature and then used to simulate the Newtonian fluid flow in
porous media. The Darcy number and the Reynolds number were observed to have great influence on the flow properties and the
location of the primary vortex. Simulation was carried out for a 100100 mesh grid and a fine agreement is established theories
in incompressible fluid flow.
Keywords: Lattice Boltzmann method, incompressible flow, porous media
Neisseria m.
This document discusses the epidemiology of Neisseria meningitidis, the bacteria that causes meningococcal disease. It outlines that epidemiology studies the frequency and distribution of diseases in populations and can help identify at-risk groups and devise prevention strategies. The document notes that N. meningitidis carriers are usually asymptomatic but that in some cases it can invade the bloodstream and cause meningitis. It discusses factors like season, geography, and serogroup that influence meningococcal disease outbreaks worldwide. The highest incidence is in sub-Saharan Africa due to environmental factors like dust storms. Vaccination programs have reduced rates of some serogroups in countries like the US and UK.
Quest for Progress (GDC Europe 2016)
Anthony Pecorella's talk at GDC Europe covering the math and design of idle games. This talk goes into details about formulas and progression systems as well as tools available for balancing these systems. Bonus sections include a quick look at stupidly-large numbers and a summary of some recent notable additions to the idle game genre.
You can try the spreadsheet models out at http://kon.gg/idle-math-spreadsheets.
GPC presentation
GP Consulting assists medical device startups in commercializing in Europe. Led by Morten Gunvad with 20 years experience in sales and marketing with international organizations, GP Consulting delivers customized sales strategies and helps clients address challenges and opportunities in commercialization. They work with clients in pre-launch, launch, and post-launch phases to choose the right sales channels, find partners, understand local markets, build value propositions, and expand successfully into new territories.
GDC 2014 Core Games, Real Numbers: Going Cross-Platform
Kongregate has been sharing great data on web games for years - now they're launching mobile games and are ready to start sharing iOS and Android numbers as well. Learn how monetization differs by platform, country, and device, what type of CPIs to expect for different kinds of games, and what's most important in making your free-to-play mobile game a success.
Bloque 02. tema 02. LOS FACTORES FÍSICOS DE LOS ESPACIOS NATURALES
Este documento trata sobre los factores físicos de los espacios naturales. Explica las principales formas del relieve como las llanuras, mesetas y montañas, y cómo se modifican lentamente debido a agentes externos como el agua y el viento. También describe la distribución de los océanos y continentes en la Tierra, así como la atmósfera y sus capas. Por último, define el tiempo, clima y zonas climáticas, señalando cómo la temperatura y precipitaciones varían según la cantidad de sol que recibe cada región
Viewers also liked (9)
Using Lattice Boltzmann Method to Investigate the Effects of Porous Media on ...
Using Lattice Boltzmann Method to Investigate the Effects of Porous Media on ...
Mesoscopic simulation of incompressible fluid flow in porous media
Mesoscopic simulation of incompressible fluid flow in porous media
GDC 2014 Core Games, Real Numbers: Going Cross-Platform
GDC 2014 Core Games, Real Numbers: Going Cross-Platform
Bloque 02. tema 02. LOS FACTORES FÍSICOS DE LOS ESPACIOS NATURALES
Bloque 02. tema 02. LOS FACTORES FÍSICOS DE LOS ESPACIOS NATURALES