DOOSAN reserves the right to improve products and recommends contacting distributors for documentation on purchased equipment, as optional equipment may not be included. Illustrations are representational and may vary from actual items. This shop manual covers safety, specifications, maintenance procedures, and component repair for the DX300LCA excavator from serial number 5001 and up.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Daewoo doosan dx300 lca excavator service repair manual (serial number 5001 and up)
1. 950106-00075E Shop Manual
Copyright 2010 DOOSAN
DOOSAN reserves the right to improve our products in a continuing process to provide the best possible
product to the market place. These improvements can be implemented at any time with no obligation to
change materials on previously sold products. It is recommended that consumers periodically contact their
distributors for recent documentation on purchased equipment.
This documentation may include attachments and optional equipment that is not available in your
machine's package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Shop Manual
950106-00075E
Serial Number 5001 and Up
DX300LCA
2. Table of Contents
Page I
1Table of Contents
Safety
Track Excavator Safety......................................................................... SP002025
Specifications
Specification for DX300LCA ................................................................. SP002026
General Maintenance
General Maintenance Procedures........................................................ SP000016
Standard Torques................................................................................. SP000813
Upper Structure
Cabin .................................................................................................... SP001737
Counterweight....................................................................................... SP001748
Fuel Tank.............................................................................................. SP002027
Fuel Transfer Pump (Opt)..................................................................... SP000021
Swing Bearing....................................................................................... SP001856
Swing Reduction Gear.......................................................................... SP002028
Lower Structure and Chassis
Track Assembly .................................................................................... SP001741
Engine and Drive Train
Drive Coupling (Main Pump)................................................................. SP002029
Hydraulics
Hydraulic System Troubleshooting, Testing and Adjustment ............... SP001751
Accumulator.......................................................................................... SP000028
Center Joint (Swivel)............................................................................. SP001620
Cylinders............................................................................................... SP000030
3. Table of Contents
Page II
Swing Motor.......................................................................................... SP000031
Travel Motor.......................................................................................... SP000032
Travel Reduction Gear.......................................................................... SP000071
Axial Piston Pump................................................................................. SP000068
Gear Pump ........................................................................................... SP000033
Main Control Valve ............................................................................... SP000034
Remote Control Valve (Work Lever / Joystick)..................................... SP000069
Travel Control Valve (With Damper)..................................................... SP001743
Solenoid Valve Assembly ..................................................................... SP001622
Breaker EPPR Valve (Opt) ................................................................... SP000192
Hydraulic Schematic DX300LC/DX300LCA ......................................... SP001752
Electrical System
Electrical System .................................................................................. SP002030
Electrical Schematic DX300/340/350LC/DX300LCA............................ SP002031
Attachments
Boom and Arm...................................................................................... SP001851
Bucket................................................................................................... SP001852
5. SP002025
Page 5
Track Excavator Safety
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling load.
Remember, that ultimately safety is your own personal
responsibility.
MODEL SERIAL NUMBER RANGE
DX300LCA 5001 and Up
6. SP002025Track Excavator Safety
Page 6
TO THE OPERATOR OF A
DOOSAN EXCAVATOR
Please respect the importance of taking responsibility for your
own safety, and that of other people who may be affected by
your actions.
The safety information on the following pages is organized into
the following sections:
1. “General Safety Essentials” on page 1-9
2. “Location of Safety Labels” on page 1-10
3. “Summary of Safety Precautions for Lifting in Digging
Mode” on page 1-10
4. “Unauthorized Modifications” on page 1-11
5. “General Hazard Information” on page 1-11
6. “Before Starting Engine” on page 1-20
7. “Machine Operation” on page 1-24
8. “Maintenance” on page 1-31
9. “Battery” on page 1-39
10. “Towing” on page 1-41
11. “Shipping and Transportation” on page 1-42
12. “Lifting With Sling” on page 1-42
DANGER
Unsafe use of the excavator could lead to serious injury or
death. Operating procedures, maintenance and equipment
practices or traveling or shipping methods that do not
follow the safety guidelines on the following pages could
cause serious, potentially fatal injuries or extensive
damage to the machine or nearby property.
7. SP002025
Page 7
Track Excavator Safety
WARNING
Improper operation and maintenance of this machine can
be hazardous and could result in serious injury or death.
Operator and maintenance personnel should read this
manual thoroughly before beginning operation or
maintenance.
Keep this manual in the storage compartment to the rear of
the operator's seat, and have all personnel involved in
working on the machine read the manual periodically.
Some actions involved in operation and maintenance of the
machine can cause a serious accident, if they are not done
in a manner described in this manual.
The procedures and precautions given in this manual apply
only to intended uses of the machine.
If you use your machine for any unintended uses that are
not specifically prohibited, you must be sure that it is safe
for any others. In no event should you or others engage in
prohibited uses or actions as described in this manual.
DOOSAN delivers machines that comply with all applicable
regulations and standards of the country to which it has
been sent. If this machine has been purchased in another
country or purchased from someone in another country, it
may lack certain safety devices and specifications that are
necessary for use in your country. If there is any question
about whether your product complies with the applicable
standards and regulations of your country, consult
DOOSAN or your DOOSAN distributor before operating the
machine.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions.
This is the Safety Alert Symbol. Wherever it appears in this
manual or on safety signs on the machine you should be
alert to the potential for personal injury or accidents.
Always observe safety precautions and follow
recommended procedures.
8. SP002025Track Excavator Safety
Page 8
Learn the Signal Words Used with the
Safety Alert Symbol
The words "CAUTION," "WARNING," and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle," no
matter which signal word appears next to the "Exclamation
Point" symbol.
Safety precautions are described in SAFETY from page -10 on.
DOOSAN cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of any procedures,
contact a DOOSAN distributor.
CAUTION
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING
This word is used on safety messages and safety labels and
indicates potential theat of a hazardous situation that, if not
avoided, could result in serious injury or death. It may also
be used to alert against highly unsafe practice.
DANGER
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may detonate or explode if handled or treated carelessly.
9. SP002025
Page 9
Track Excavator Safety
GENERAL SAFETY ESSENTIALS
Accessory Applications
The excavator has been primarily designed for moving earth
with a bucket. For use as a grapple or for other object handling,
contact DOOSAN for proper installation and application. Lifting-
work applications (unless restricted or prohibited by local
regulations) are permitted in approved lift configuration, to rated
capacity only, with no side-loading. DO NOT use the machine
for activities for which it was not intended. DO NOT use the
bucket for lifting work, unless lift slings are used in the approved
configuration.
Use of an accessory hydraulic hammer (breaker), work in rough
terrain, demolition applications or other hazardous operation
may require installation of additional protective structures to
safeguard the operator.
Lifting Capacity Rating Configuration
Lifting capacity ratings that are printed at the end of this safety
section are based on the machine being level, on a firm
supporting surface, with hooks and slings attached in approved
configuration. Loads must be balanced and supported evenly.
Use tag lines to keep the load steady if wind conditions and
large surface area are a problem. Work crew hand signals,
individual tasks and safe procedures should all be universally
understood before the lift is made.
IMPORTANT
Before using the excavator to make lifts check municipal
and regional regulations or statutes that could apply.
Governing ordinances may require that all heavy lifting be
done with single purpose equipment specifically designed
for making lifts, or other local restrictions may apply.
Making heavy lifts with a general purpose excavator that
can be used for digging, loading, grading or other work may
be expressly forbidden by a regional injunction or other
legal prohibition. Always follow all of the other instructions,
guidelines and restrictions for Safe Lifting in the Operation
and Maintenance Manuals.
11. SP002028
Page 5
Swing Reduction Gear
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling load.
Remember, that ultimately safety is your own personal
responsibility.
MODEL SERIAL NUMBER RANGE
DX300LCA 5001 and Up
12. SP002028
Page 7
Swing Reduction Gear
GENERAL DESCRIPTION
Theory of Operation
The swing motor final drive is a two-stage planetary gearbox
with two planet gears, two sun gears and two-stage output
reduction. The planetary gear engages the ring gear. The pinion
gear is connected to the output shaft and spline.
The final drive reduces swing motor rpm in order to increase
swing motor output torque. The available maximum swing speed
provides a fast turning rate for efficient, rapid work cycling with
more than adequate power for good acceleration.
14. SP002028
Page 9
Swing Reduction Gear
Specifications
Reference
Number
Description
1 Shaft
2 Gear Case
3 No. 2 Carrier
4 No. 2 Sun Gear
5 No. 2 Planetary Gear
6 No. 2 Thrust Plate
7 No. 2 Shaft
8 No. 2 Bushing
9 No. 1 Carrier
10 No. 1 Sun Gear
11 No. 1 Planetary Gear
12 No. 1 Thrust Plate
13 No. 1 Shaft
14 Ring Gear
15 Thrust Plate
17 Lock Pin
18 Spacer
19 Collar
20 Plate
21 Lock Ring
22 Spherical Roller Bearing
23 Spherical Roller Bearing
24 Oil Seal
25 Spring Pin
26 Plug
27 Plug
28 Pinion
29 Socket Head Bolt
30 Pipe
31 Level Gauge
32 No. 3 Thrust Plate
33 Retaining Ring
34 Socket Head Bolt
35 Cover
36 Wire
37 Retaining Ring
38 Case Cover
39 Socket Head Bolt
Reference
Number
Description
Swing Reduction Gearbox Specification
Drive Type Two-stage Planetary Gear
Reduction Ratio 21.968
Maximum Output Speed 59 rpm
Maximum Output Torque
1,870 kg•m
(13,525 ft lb)
Weight
400 kg
(882 lb)
Pinion Gear Specification
Type Spur Gear
Gear P.C.D
196 mm
(7.72 in)
No. of Teeth 14
Module 14
15. SP002028
Page 11
Swing Reduction Gear
REMOVAL
1. Park on firm and level ground.
2. Lower front attachment (bucket) to ground.
3. Shut down engine.
4. Set safety lever on "RELEASED" position.
5. Turn starter switch to "I" (ON) position.
6. Fully stroke work levers (joysticks) in all directions to
relieve any pressure from accumulators.
7. Set safety lever on "LOCK" position.
8. Turn key to "O" (OFF) position and remove from starter
switch.
9. Hang a maintenance warning tag on controls.
10. Disconnect negative (-) battery cable leading to frame from
battery.
11. Tag and disconnect hoses from swing motor (1, Figure 3).
Plug and cap hoses and ports to prevent contamination
from entering hydraulic system or component.
12. Remove drain plug (3, Figure 3) from reducer (8) and drain
oil from reduction gearbox (5, Figure 3).
13. Reassemble drain plug (3) to reducer (8) and disconnect
hose (2, Figure 3) from reduction gearbox (5).
14. Disconnect grease lubrication line (7, Figure 3) from
reduction gearbox (5).
15. Remove twelve bolts and washers (4, Figure 3) holding
swing reduction gearbox (5) to frame.
16. Using a suitable lifting device, sling swing motor (1, Figure
3) and remove swing motor and reduction gearbox (5) as
an assembly from unit.
NOTE: There are two alignment pins (6, Figure 3), on
reduction gearbox flange.
O I
FG014348
DO NOT OPERATE
when performing inspection
WARNING
190-00695A
or maintenance
Figure 2
WARNING
If engine must be running while performing
maintenance, always use extreme caution. Always
have one person in cab at all times. Never leave cab
with engine running.
1
4
6
5
7
2
3
8
FG004063
Figure 3
16. SP002028Swing Reduction Gear
Page 12
DISASSEMBLY
1. Remove bolts and motor from swing reduction case.
2. Remove level pipe from cover.
3. Remove bolts and cover from case.
IMPORTANT
Select a clean place.
Spread a rubber mat or cloth on top of the overhaul
workbench to prevent parts from being damaged.
Figure 4
CAUTION
The motor should be separated without damage or any
foreign substance.
Figure 5
Figure 6
CAUTION
Care should be taken not to damage mounting surface
of cover. Carefully remove all gasket material from
mounting surfaces.
17. SP002028
Page 13
Swing Reduction Gear
4. Remove No. 1 sun gear from No. 1 carrier.
Figure 7
Figure 8
Figure 9
CAUTION
Care should be taken not to damage teeth of No. 1 sun
gear.
19. SP002028
Page 15
Swing Reduction Gear
6. Remove washer and No. 2 sun gear.
7. Install eye bolts in No. 2 carrier and remove it from ring
gear.
Figure 13
CAUTION
Care should be taken not to damage teeth of No. 2 sun
gear.
Figure 14
Figure 15
CAUTION
Care should be taken not to damage teeth of No. 2
carrier and ring gear.
20. SP002028Swing Reduction Gear
Page 16
8. Install eye bolts in ring gear and remove it.
Figure 16
Figure 17
CAUTION
Care should be taken not to damage mounting
surfaces of ring gear and case. Carefully remove all
gasket material from mounting surfaces.
Figure 18
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. SP002028
Page 17
Swing Reduction Gear
9. Use a rollover machine to turn assembly over, loosen lock
wire, bolts and cover.
Figure 19
Figure 20
Figure 21
23. SP002028Swing Reduction Gear
Page 18
10. Remove pinion gear.
11. Using a gear puller to remove collar.
Figure 22
Figure 23
Figure 24
24. SP002028
Page 19
Swing Reduction Gear
12. Using snap ring pliers, remove lock ring and disassemble
plate.
13. Use a rollover machine to turn case over and place a jig on
drive shaft. Use a press to remove drive shaft from case.
Figure 25
Figure 26
Figure 27
CAUTION
Care should be taken not to have drive shaft drop to
floor when it is pressed out of case.