This document is a service manual that provides information for maintaining and repairing various models of telehandlers. It contains sections covering safety practices, general machine information and specifications, maintenance of the boom assembly, cab and covers, axles/drive shafts/wheels, engine/powertrain systems, hydraulic systems, and electrical systems. The manual provides component terminology, specifications, maintenance schedules, repair and replacement procedures, and troubleshooting information for the different systems.
Liebherr r964 c 1009 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualdufjdjskkemm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r934 c hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual for Liebherr hydraulic excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for maintenance and repairs.
2. Sections covering the engine, hydraulic and electrical systems, swing gear, track components and other parts.
3. Safety symbols and instructions for working on the machines.
The manual is intended to assist customer support but does not replace technical training. It includes schematics, diagrams and detailed views of machine units.
Jcb 10 tft dumper service repair manual sn from grn1313 to grn1313dufjdjskkemm
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed procedures for removing and installing parts like fuel pipes and injector bleed-off pipes, with accompanying diagrams and special tool requirements. Safety information is included throughout regarding working on fuel system components.
Jcb 5 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing the backhoe loader models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The sample document focuses on servicing the crankshaft and main bearings of the engine. It provides details on lubrication, inspection procedures, removing and installing the crankshaft, installing new main bearing shells, checking clearances, and required torque specifications.
Jcb 4 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repairs, and inspections. Safety precautions are emphasized throughout requiring technicians to fully understand instructions before operating or servicing the machine.
Liebherr r964 c 1009 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualdufjdjskkemm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r934 c hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual for Liebherr hydraulic excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for maintenance and repairs.
2. Sections covering the engine, hydraulic and electrical systems, swing gear, track components and other parts.
3. Safety symbols and instructions for working on the machines.
The manual is intended to assist customer support but does not replace technical training. It includes schematics, diagrams and detailed views of machine units.
Jcb 10 tft dumper service repair manual sn from grn1313 to grn1313dufjdjskkemm
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed procedures for removing and installing parts like fuel pipes and injector bleed-off pipes, with accompanying diagrams and special tool requirements. Safety information is included throughout regarding working on fuel system components.
Jcb 5 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing the backhoe loader models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The sample document focuses on servicing the crankshaft and main bearings of the engine. It provides details on lubrication, inspection procedures, removing and installing the crankshaft, installing new main bearing shells, checking clearances, and required torque specifications.
Jcb 4 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repairs, and inspections. Safety precautions are emphasized throughout requiring technicians to fully understand instructions before operating or servicing the machine.
Jcb 3 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing the backhoe loader models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The sample document focuses on servicing the crankshaft and main bearings of the engine. It provides details on lubrication, inspection procedures, removing and installing the crankshaft, installing new main bearing shells, checking clearances, and required torque specifications.
Daewoo doosan solar 175 lc v (di exp) crawler excavator parts catalogue manualdufjdjskkemm
This document provides a parts list and diagrams for components of a SOLAR 175LC-V engine, including the cylinder block, timing gear case, flywheel housing, crank shaft, cylinder head, and other parts. It lists over 50 individual parts with descriptions and identifies replacement parts. The parts list contains technical specifications like part numbers, quantities, serial numbers, and notes on replaceability.
Daewoo doosan solar 170 lc v (dieu exp) crawler excavator parts catalogue manualdufjdjskkemm
This document provides an exploded diagram and parts list for the valve mechanism of a SOLAR 170LC-V engine. It lists over 30 individual parts that make up the valve mechanism including inlet and exhaust valves, valve springs, retainers, rocker arms, rocker arm shaft assembly, and mounting brackets. Fasteners such as bolts, nuts, springs, and washers that hold the assembly together are also detailed.
Daewoo doosan solar 170 lc v (di exp) crawler excavator parts catalogue manualdufjdjskkemm
This document contains a parts list and diagrams for engine components of a Solar 170LC-V engine, including:
1. A cylinder block parts list with 52 items such as the cylinder block assembly, bearing caps, plugs, bolts, and liners.
2. A timing gear case diagram with 19 items like the timing gear case, cover, pins, and bolts.
3. A flywheel housing diagram with 16 items including the flywheel housing, bolts, washers, seal, and gasket.
4. A crankshaft diagram with over 30 items such as the crankshaft assembly, shaft, gear, bushings, connecting rods, bearings,
Caterpillar cat th417 c telehandler operator and maintenance manualdufjdjskkemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety guidelines. Contact JLG for any questions.
Caterpillar cat th406 c telehandler service repair manualdufjdjskkemm
This document is a service manual that provides information for maintaining and repairing various models of telehandlers. It contains sections covering safety practices, general machine information and specifications, maintenance of the boom assembly, cab and covers, axles/drive shafts/wheels, engine/powertrain systems, hydraulic systems, and electrical systems. The manual provides component terminology, specifications, maintenance schedules, repair and replacement procedures, and troubleshooting information.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix mdg) service...dufjdjskkemm
This document provides assembly instructions for a final drive on a D11T track-type tractor. It outlines 37 steps to assemble bearings, seals, gears, carriers, retainers, shafts and other components. Precise torque specifications and clearance measurements are specified at various steps. Tools required include link brackets, drivers, spacer rings, seal installers and other implements to correctly position and install the components according to specifications.
Caterpillar cat d11 t track type tractor (prefix ama) service repair manual (...dufjdjskkemm
This document provides instructions for disassembling and assembling the torque converter of a D11T track-type tractor. It lists 50 steps for disassembly, including removing bolts, gears, seals, and other components. It then lists 27 steps for assembly, including pressing in bearings, installing seals and rings, and tightening bolts to the specified torques. Proper cleaning of parts and inspection for wear are emphasized throughout.
Caterpillar cat d6 h track type tractor (prefix 4yf) service repair manual (4...dufjdjskkemm
1. The document provides instructions for separating, connecting, disassembling, and assembling the track on a D6H track-type tractor.
2. Key steps include loosening the track adjuster to release grease and separate the track, connecting it using a chain pulled by another vehicle, and ensuring the master link is securely bolted with the specified torque.
3. Detailed procedures are given for removing individual track links, pins, and bushings, as well as pressing new bushings into links and reassembling the track section. Proper lubrication and force limits are noted to prevent damage.
Caterpillar cat 135 h motor grader (prefix 7mm) service repair manual (7mm000...dufjdjskkemm
This document provides instructions for removing and installing various components of the power train system on 120H and 135H Motor Graders, including the parking brake, tandem drive housings, drive sprockets, and final drives. The instructions describe disconnecting transmission lines, draining oil, and removing/installing specific parts like housings, sprockets, seals and bolts using numbered steps and references to tools. Safety precautions are provided to release air pressure before disconnecting lines and avoid burns from hot oil.
Liebherr r906 1449 classic hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical specifications, maintenance guidelines, and instructions for repairing and servicing various engine, hydraulic, electrical, and other components of the excavators. The manual is intended to assist customer support services and includes symbols to identify safety warnings and notes for procedures. It also provides guidelines for how the manual is structured and indexed.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh60 m timber hydraulic excavator service repair manualdufjdjskkemm
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with safe operation of the machine.
Liebherr lh40 c 1527 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
This document contains figures and tables describing components of mechanical devices like differential cylinders, shock absorbers, and hydraulic cylinders. It discusses mounting of clamping nuts in different configurations and adjusting swing brakes. Tables list recommended corrosion inhibitors and paint coatings from Liebherr. The document encourages downloading a complete manual for more details.
Liebherr lh35 1201 hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains diagrams and tables related to hydraulic cylinders and corrosion prevention. Figures 1-4 illustrate components of cylinders and their assembly while Tables 1-2 list recommended corrosion inhibitors and paints from Liebherr. The manual instructs the reader to click on a link to access the complete document.
Liebherr lh30 1210 hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Daewoo Doosan Solar 225LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan Solar 170LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Jcb 3 cx backhoe loader service repair manual sn from 2254521 — 2274521dufjdjskkemm
This service manual provides instructions for servicing the backhoe loader models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The sample document focuses on servicing the crankshaft and main bearings of the engine. It provides details on lubrication, inspection procedures, removing and installing the crankshaft, installing new main bearing shells, checking clearances, and required torque specifications.
Daewoo doosan solar 175 lc v (di exp) crawler excavator parts catalogue manualdufjdjskkemm
This document provides a parts list and diagrams for components of a SOLAR 175LC-V engine, including the cylinder block, timing gear case, flywheel housing, crank shaft, cylinder head, and other parts. It lists over 50 individual parts with descriptions and identifies replacement parts. The parts list contains technical specifications like part numbers, quantities, serial numbers, and notes on replaceability.
Daewoo doosan solar 170 lc v (dieu exp) crawler excavator parts catalogue manualdufjdjskkemm
This document provides an exploded diagram and parts list for the valve mechanism of a SOLAR 170LC-V engine. It lists over 30 individual parts that make up the valve mechanism including inlet and exhaust valves, valve springs, retainers, rocker arms, rocker arm shaft assembly, and mounting brackets. Fasteners such as bolts, nuts, springs, and washers that hold the assembly together are also detailed.
Daewoo doosan solar 170 lc v (di exp) crawler excavator parts catalogue manualdufjdjskkemm
This document contains a parts list and diagrams for engine components of a Solar 170LC-V engine, including:
1. A cylinder block parts list with 52 items such as the cylinder block assembly, bearing caps, plugs, bolts, and liners.
2. A timing gear case diagram with 19 items like the timing gear case, cover, pins, and bolts.
3. A flywheel housing diagram with 16 items including the flywheel housing, bolts, washers, seal, and gasket.
4. A crankshaft diagram with over 30 items such as the crankshaft assembly, shaft, gear, bushings, connecting rods, bearings,
Caterpillar cat th417 c telehandler operator and maintenance manualdufjdjskkemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety guidelines. Contact JLG for any questions.
Caterpillar cat th406 c telehandler service repair manualdufjdjskkemm
This document is a service manual that provides information for maintaining and repairing various models of telehandlers. It contains sections covering safety practices, general machine information and specifications, maintenance of the boom assembly, cab and covers, axles/drive shafts/wheels, engine/powertrain systems, hydraulic systems, and electrical systems. The manual provides component terminology, specifications, maintenance schedules, repair and replacement procedures, and troubleshooting information.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix mdg) service...dufjdjskkemm
This document provides assembly instructions for a final drive on a D11T track-type tractor. It outlines 37 steps to assemble bearings, seals, gears, carriers, retainers, shafts and other components. Precise torque specifications and clearance measurements are specified at various steps. Tools required include link brackets, drivers, spacer rings, seal installers and other implements to correctly position and install the components according to specifications.
Caterpillar cat d11 t track type tractor (prefix ama) service repair manual (...dufjdjskkemm
This document provides instructions for disassembling and assembling the torque converter of a D11T track-type tractor. It lists 50 steps for disassembly, including removing bolts, gears, seals, and other components. It then lists 27 steps for assembly, including pressing in bearings, installing seals and rings, and tightening bolts to the specified torques. Proper cleaning of parts and inspection for wear are emphasized throughout.
Caterpillar cat d6 h track type tractor (prefix 4yf) service repair manual (4...dufjdjskkemm
1. The document provides instructions for separating, connecting, disassembling, and assembling the track on a D6H track-type tractor.
2. Key steps include loosening the track adjuster to release grease and separate the track, connecting it using a chain pulled by another vehicle, and ensuring the master link is securely bolted with the specified torque.
3. Detailed procedures are given for removing individual track links, pins, and bushings, as well as pressing new bushings into links and reassembling the track section. Proper lubrication and force limits are noted to prevent damage.
Caterpillar cat 135 h motor grader (prefix 7mm) service repair manual (7mm000...dufjdjskkemm
This document provides instructions for removing and installing various components of the power train system on 120H and 135H Motor Graders, including the parking brake, tandem drive housings, drive sprockets, and final drives. The instructions describe disconnecting transmission lines, draining oil, and removing/installing specific parts like housings, sprockets, seals and bolts using numbered steps and references to tools. Safety precautions are provided to release air pressure before disconnecting lines and avoid burns from hot oil.
Liebherr r906 1449 classic hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical specifications, maintenance guidelines, and instructions for repairing and servicing various engine, hydraulic, electrical, and other components of the excavators. The manual is intended to assist customer support services and includes symbols to identify safety warnings and notes for procedures. It also provides guidelines for how the manual is structured and indexed.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh60 m timber hydraulic excavator service repair manualdufjdjskkemm
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with safe operation of the machine.
Liebherr lh40 c 1527 (tier4f) hydraulic excavator service repair manualdufjdjskkemm
This document contains figures and tables describing components of mechanical devices like differential cylinders, shock absorbers, and hydraulic cylinders. It discusses mounting of clamping nuts in different configurations and adjusting swing brakes. Tables list recommended corrosion inhibitors and paint coatings from Liebherr. The document encourages downloading a complete manual for more details.
Liebherr lh35 1201 hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains diagrams and tables related to hydraulic cylinders and corrosion prevention. Figures 1-4 illustrate components of cylinders and their assembly while Tables 1-2 list recommended corrosion inhibitors and paints from Liebherr. The manual instructs the reader to click on a link to access the complete document.
Liebherr lh30 1210 hydraulic excavator service repair manualdufjdjskkemm
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualdufjdjskkemm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Daewoo Doosan Solar 225LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan Solar 170LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 170LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. Safety Practices
1-2 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
1.1 INTRODUCTION
This service manual provides general directions for
accomplishing service and repair procedures. Following
the procedures in this manual will help assure safety and
equipment reliability.
Read, understand and follow the information in this
manual, and obey all locally approved safety practices,
procedures, rules, codes, regulations and laws.
These instructions cannot cover all details or variations in
the equipment, procedures, or processes described, nor
provide directions for meeting every possible contingency
during operation, maintenance, or testing. When additional
information is desired consult the local Caterpillar dealer.
Many factors contribute to unsafe conditions: carelessness,
fatigue, overload, inattentiveness, unfamiliarity, even
drugs and alcohol, among others. For optimal safety,
encourage everyone to think, and to act, safely.
Appropriate service methods and proper repair
procedures are essential for the safety of the individual
doing the work, for the safety of the operator, and for the
safe, reliable operation of the machine. All references to
the right side, left side, front and rear are given from the
operator seat looking in a forward direction.
Supplementary information is available from the
manufacturer in the form of Service Bulletins, Service
Campaigns, Service Training Schools, the service
website, other literature, and through updates to the
manual itself.
1.2 DISCLAIMER
All information in this manual is based on the latest
product information available at the time of publication.
The manufacturer reserves the right to make changes
and improvements to its products, and to discontinue the
manufacture of any product, at its discretion at any time
without public notice or obligation.
1.3 OPERATION & MAINTENANCE
MANUAL
The mechanic must not operate the machine until the
Operation & Maintenance Manual has been read and
understood, training has been accomplished and
operation of the machine has been completed under the
supervision of an experienced and qualified operator.
An Operation & Maintenance Manual is supplied with
each machine and must be kept in the manual holder
located in the cab. In the event that the Operation &
Maintenance Manual is missing, consult the local
Caterpillar dealer before proceeding.
1.4 DO NOT OPERATE TAGS
Place Do Not Operate Tags on the ignition key switch and
the steering wheel before attempting to perform any
service or maintenance. Remove key and disconnect
battery leads.
1.5 SAFETY INFORMATION
To avoid possible death or injury, carefully read,
understand and comply with all safety messages.
In the event of an accident, know where to obtain medical
assistance and how to use a first aid kit and fire
extinguisher/fire suppression system. Keep emergency
telephone numbers (fire department, ambulance, rescue
squad/paramedics, police department, etc.) nearby. If
working alone, check with another person routinely to
help assure personal safety.
1.6 SAFETY ALERT SYSTEM AND
SIGNAL WORDS
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
DANGER
WARNING
CAUTION
7. 1-3
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
Safety Practices
1.7 SAFETY INSTRUCTIONS
Following are general safety statements to consider before
performing maintenance procedures on the telehandler.
Additional statements related to specific tasks and
procedures are located throughout this manual and are
listed prior to any work instructions to provide safety
information before the potential of a hazard occurs.
For all safety messages, carefully read, understand and
follow the instructions before proceeding.
1.7.1 Personal Hazards
PERSONAL SAFETY GEAR: Wear all the protective
clothing and personal safety gear necessary to perform
the job safely. This might include heavy gloves, safety
glasses or goggles, filter mask or respirator, safety shoes
or a hard hat.
LIFTING: NEVER lift a heavy object without the help of at
least one assistant or a suitable sling and hoist.
1.7.2 Equipment Hazards
LIFTING OF EQUIPMENT: Before using any lifting
equipment (chains, slings, brackets, hooks, etc.), verify
that it is of the proper capacity, in good working order, and
is properly attached.
NEVER stand or otherwise become positioned under a
suspended load or under raised equipment. The load or
equipment could fall or tip.
DO NOT use a hoist, jack or jack stands only to support
equipment. Always support equipment with the proper
capacity blocks or stands properly rated for the load.
HAND TOOLS: Always use the proper tool for the job;
keep tools clean and in good working order, and use
special service tools only as recommended.
1.7.3 General Hazards
SOLVENTS: Only use approved solvents that are known
to be safe for use.
HOUSEKEEPING: Keep the work area and operator cab
clean, and remove all hazards (debris, oil, tools, etc.).
FIRST AID: Immediately clean, dress and report all injuries
(cuts, abrasions, burns, etc.), no matter how minor the
injury may seem. Know the location of a First Aid Kit, and
know how to use it.
CLEANLINESS: Wear eye protection, and clean all
components with a high pressure or steam cleaner before
attempting service.
When removing hydraulic components, plug hose ends
and connections to prevent excess leakage and
contamination. Place a suitable catch basin beneath the
machine to capture fluid run off.
It is good practice to avoid pressure-washing electrical/
electronic components. In the event pressure-washing
the machine is needed, ensure the machine is shut down
before pressure-washing. Should pressure-washing be
utilized to wash areas containing electrical/electronic
components, JLG recommends a maximum pressure of
52 bar (750 psi) at a minimum distance of 30,5 cm (12 in)
away from these components. If electrical/electronic
components are sprayed, spraying must not be direct and
for brief time periods to avoid heavy saturation,
Check and obey all Federal, State and/or Local
regulations regarding waste storage, disposal and
recycling.
8. Safety Practices
1-4 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
1.7.4 Operational Hazards
ENGINE: Stop the engine before performing any service
unless specifically instructed otherwise.
VENTILATION: Avoid prolonged engine operation in
enclosed areas without adequate ventilation.
SOFT SURFACES AND SLOPES: NEVER work on a
machine that is parked on a soft surface or slope. The
machine must be on a hard level surface, with the wheels
blocked before performing any service.
FLUID TEMPERATURE: NEVER work on a machine
when the engine, cooling or hydraulic systems are hot.
Hot components and fluids can cause severe burns.
Allow systems to cool before proceeding.
FLUID PRESSURE: Before loosening any hydraulic or
diesel fuel component, hose or tube, turn the engine
OFF. Wear heavy, protective gloves and eye protection.
NEVER check for leaks using any part of your body; use
a piece of cardboard or wood instead. If injured, seek
medical attention immediately. Diesel fluid leaking under
pressure can explode. Hydraulic fluid and diesel fuel
leaking under pressure can penetrate the skin, cause
infection, gangrene and other serious personal injury.
Refer to the engine manufacturer’s manual for specific
details concerning the fuel system.
Engine fuel lines are pressurized. DO NOT attempt
repairs unless specific training has been completed.
Refer to the engine manufacturers’ manual for specific
details concerning the fuel system.
Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen parts and
allow release of residual pressure before removing any
part or component. Before starting the engine or applying
pressure, use components, parts, hoses and pipes that
are in good condition, connected properly and are
tightened to the proper torque. Capture fluid in an
appropriate container and dispose of in accordance with
prevailing environmental regulations.
COOLANT SYSTEM CAP: The cooling system is under
pressure, and escaping coolant can cause severe burns
and eye injury. To prevent personal injury, NEVER
remove the coolant system cap while the cooling system
is hot. Wear safety glasses. Turn the coolant system cap
to the first stop and allow pressure to escape before
removing the cap completely. Failure to follow the safety
practices could result in death or serious injury.
FLUID FLAMABILTITY: DO NOT service the fuel or
hydraulic systems near an open flame, sparks or smoking
materials.
Properly disconnect battery(s) prior to servicing the fuel
or hydraulic systems.
NEVER drain or store fluids in an open container. Engine
fuel and hydraulic fluid are flammable and can cause a
fire and/or explosion.
DO NOT mix gasoline or alcohol with diesel fuel. The
mixture can cause an explosion.
PRESSURE TESTING: When conducting any test, only
use test equipment that is correctly calibrated and in good
condition. Use the correct equipment in the proper
manner, and make changes or repairs as indicated by the
test procedure to achieve the desired result.
LEAVING MACHINE: Lower the forks or attachment to
the ground before leaving the machine.
TIRES: Always keep tires inflated to the proper pressure
to help prevent tipover. DO NOT over inflate tires.
NEVER use mismatched tire types, sizes or ply ratings.
Always use matched sets according to machine
specifications.
MAJOR COMPONENTS: Never alter, remove, or
substitute any items such as counterweights, tires,
batteries or other items that may reduce or affect the
overall weight or stability of the machine.
BATTERY: DO NOT charge a frozen battery.Charging a
frozen battery may cause it to explode. Allow the battery
to thaw before jump starting or connecting a battery
charger.
1.8 SAFETY DECALS
Check that all safety decals are present and readable on
the machine. Refer to the Operation & Maintenance
Manual supplied with machine for information.
10. General Information and Specifications
2-2 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.1 REPLACEMENT PARTS AND
WARRANTY INFORMATION
Before ordering parts or initiating service inquiries, make
note of the machine serial number. The machine serial
number plate (1) is located on the frame behind the right
front tire.
Note: The replacement of any part on this machine with
any other than factory authorized replacement parts can
adversely affect the performance, durability, or safety of
the machine, and will void the warranty. JLG disclaims
liability for any claims or damages, whether regarding
property damage, personal injury or death arising out of
the use of unauthorized replacement parts.
A warranty registration form must be filled out by the local
Caterpillar dealer.
Registration activates the warranty period and helps to
assure that warranty claims are promptly processed to
guarantee full warranty service.
2.2 THREAD LOCKING COMPOUND
Loctite®
243TM
can be substituted in place of Loctite®
242TM
.
Vibra-TITETM
122 can be substituted in place of Vibra-
TITETM
121.
MZ6510
1
Loctite® ND Industries Description
242TM Vibra-TITETM121 Medium Strength (Blue)
243TM Vibra-TITETM122 Medium Strength (Blue)
271TM Vibra-TITETM140 High Strength (Red)
262TM Vibra-TITETM131 Medium - High Strength (Red)
17. 2-9
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.2 Metric Fastener Torque Chart
Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*
CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM)
Torque (Lube)
Torque
(Loctite® 262TM or
271TM
or Vibra-TITETM
131)
Torque
(Loctite® 242TM
or
271TM or Vibra-TITETM
111
or 141)
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 2.19 1.3 1.0 1.2 1.4
3.5 0.6 6.78 2.95 2.1 1.6 1.9 2.3
4 0.7 8.78 3.82 3.1 2.3 2.8 3.4
5 0.8 14.20 6.18 6.2 4.6 5.6 6.8
6 1 20.10 8.74 11 7.9 9.4 12
7 1 28.90 12.6 18 13 16 19
8 1.25 36.60 15.9 26 19 23 28
10 1.5 58.00 25.2 50 38 45 55
12 1.75 84.30 36.7 88 66 79 97
14 2 115 50.0 140 105 126 154
16 2 157 68.3 219 164 197 241
18 2.5 192 83.5 301 226 271 331
20 2.5 245 106.5 426 320 383 469
22 2.5 303 132.0 581 436 523 639
24 3 353 153.5 737 553 663 811
27 3 459 199.5 1080 810 970 1130
30 3.5 561 244.0 1460 1100 1320 1530
33 3.5 694 302.0 1990 1490 1790 2090
36 4 817 355.5 2560 1920 2300 2690
42 4.5 1120 487.0 4090 3070 3680 4290
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
18. General Information and Specifications
2-10 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*
CLASS 10.9 METRIC (HEX HEAD) BOLTS,
CLASS 10 METRIC NUTS CLASS 12.9 SOCKET HEAD CAP SCREWS M3 - M5*
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM)
K=0.20
Torque
(Lube or Loctite®
242TM
or 271TM
or
Vibra-TITETM 111 or 140)
K=0.18
Torque
(Loctite® 262TM
or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 3.13
3.5 0.6 6.78 4.22
4 0.7 8.78 5.47
5 0.8 14.20 8.85
6 1 20.10 12.5
7 1 28.90 18.0 25 23 19
8 1.25 36.60 22.8 37 33 27
10 1.5 58.00 36.1 70 65 55
12 1.75 84.30 52.5 125 115 95
14 2 115 71.6 200 180 150
16 2 157 97.8 315 280 235
18 2.5 192 119.5 430 385 325
20 2.5 245 152.5 610 550 460
22 2.5 303 189.0 830 750 625
24 3 353 222.0 1065 960 800
27 3 459 286.0 1545 1390 1160
30 3.5 561 349.5 2095 1885 1575
33 3.5 694 432.5 2855 2570 2140
36 4 817 509.0 3665 3300 2750
42 4.5 1120 698.0 5865 5275 4395
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 2-11
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Magni Coated Fasteners (Ref 4150701)*
CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM
)
K=0.17
Torque
(Lube or Loctite® 242TM
or
271TM
or
Vibra-TITETM 111 or 140)
K=0.16
Torque
(Loctite® 262TM
or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 2.19 1.1 1.1 1.0
3.5 0.6 6.78 2.95 1.8 1.7 1.5
4 0.7 8.78 3.82 2.6 2.4 2.3
5 0.8 14.20 6.18 5.3 4.9 4.6
6 1 20.10 8.74 9 8.4 7.9
7 1 28.90 12.6 15 14 13
8 1.25 36.60 15.9 22 20 19
10 1.5 58.00 25.2 43 40 38
12 1.75 84.30 36.7 75 70 66
14 2 115 50.0 119 110 105
16 2 157 68.3 186 175 165
18 2.5 192 83.5 256 240 225
20 2.5 245 106.5 362 340 320
22 2.5 303 132.0 494 465 435
24 3 353 153.5 627 590 555
27 3 459 199.5 916 860 810
30 3.5 561 244.0 1245 1170 1100
33 3.5 694 302.0 1694 1595 1495
36 4 817 355.5 2176 2050 1920
42 4.5 1120 487.0 3477 3275 3070
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
21. General Information and Specifications
2-12 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Magni Coated Fasteners (Ref 4150701)*
CLASS 10.9 METRIC (HEX HEAD) BOLTS CLASS 10 METRIC NUTS,
CLASS 12.9 SOCKET HEAD CAP SCREWS M6 AND ABOVE*
Size Pitch
Tensile Stress
Area
Clamp Load See
Note 4
Torque
(Dry or Loctite® 263TM
)
K=0.17
Torque
(Lube or Loctite®
242TM
or 271TM
or
Vibra-TITETM
111 or 140)
K=0.18
Torque
(Loctite® 262TM or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 3.13
3.5 0.6 6.78 4.22
4 0.7 8.78 5.47
5 0.8 14.20 8.85
6 1 20.10 12.5 13 12 11
7 1 28.90 18.0 21 20 19
8 1.25 36.60 22.8 31 29 27
10 1.5 58.00 36.1 61 58 55
12 1.75 84.30 52.5 105 100 95
14 2 115 71.6 170 160 150
16 2 157 97.8 265 250 235
18 2.5 192 119.5 365 345 325
20 2.5 245 152.5 520 490 460
22 2.5 303 189.0 705 665 625
24 3 353 222.0 905 850 800
27 3 459 286.0 1315 1235 1160
30 3.5 561 349.5 1780 1680 1575
33 3.5 694 432.5 2425 2285 2140
36 4 817 509.0 3115 2930 2750
42 4.5 1120 698.0 4985 4690 4395
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
22. 2-13
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.3 Hydraulic Hose Torque Chart
Note: By definition the “Flats Method“ will contain some
variance. Use the “Flats Method” only when accessibility
with a torque wrench is not possible.
Torque Wrench:
1. Identify the appropriate application and refer to the
above chart for the correct torque value.
2. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).
3. Use the double wrench method while tightening to
avoid hose twist.
4. Torque wrench must be held at the center of the grip.
Apply constant force until it clicks.
5. After the connection has been properly tightened,
mark a straight line across the connecting parts
indicating that the connection has been properly
tightened.
Flats Method:
1. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).
2. Mark a dot on one of the swivel nut flats and another
dot in line on the hex of the adapter it’s connecting
to.
3. Use the double wrench method while tightening to
avoid hose twist.
4. After the connection has been properly tightened,
mark a straight line across the connecting parts, not
covering the dots indicating that the connection has
been properly tightened.
O-Ring Face Seal & JIC Torque Chart
Size ORFS JIC Flats Method
4
18 Nm
(13 lb-ft)
18 Nm
(13 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
6
31 Nm
(23 lb-ft)
31 Nm
(23 lb-ft)
25,4 to 38,1 mm
1 to 1.5 in.
8
54 Nm
(40 lb-ft)
54 Nm
(40 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
10
81 Nm
(60 lb-ft)
81 Nm
(60 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
12
100 Nm
(136 lb-ft)
115 Nm
(85 lb-ft)
25,4 to 38,1 mm
1 to 1.5 in.
16
156 Nm
(115 lb-ft)
156 Nm
(115 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
20
230 Nm
(170 lb-ft)
230 Nm
(170 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
24
271 Nm
(200 lb-ft)
271 Nm
(200 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
32 N/A
366 Nm
(270 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.