1. The document provides safety information and guidelines for operating a Doosan wheel excavator. It outlines general safety essentials, locations of safety labels, lifting precautions, prohibited modifications, and hazard information.
2. Sections are included that describe safety procedures for starting the engine, machine operation, maintenance, working with batteries, towing, shipping, and lifting with a sling.
3. Operators and maintenance personnel are warned to read the safety manual thoroughly to learn safe operating and maintenance practices, in order to prevent accidents and injuries.
Daewoo doosan dx190 w excavator service repair manual (serial number 5001 and...udjfjjsekekkem
The document provides safety information and instructions for removing and installing the cabin shell on a Doosan wheel excavator. It begins by listing applicable models and emphasizing safety precautions. It then provides step-by-step instructions to disconnect wiring, remove covers and brackets, and lift the cabin shell off using slings attached at lift points. Reinstallation follows the removal steps in reverse order. Precautions are given such as using lifting equipment rated for the cabin weight of approximately 700 pounds.
Daewoo doosan dx210 w excavator service repair manual (serial number 5001 and...udjfjjsekekkem
The document provides maintenance information for a swing bearing and swing reduction gear used in a Doosan wheel excavator:
- Instructions are given for measuring swing bearing axial and lateral play to check for wear.
- The swing reduction gear reduces the swing motor RPM to increase torque for fast turning. It has a two-stage planetary gear configuration.
- Troubleshooting tips and removal instructions are provided for the swing reduction gearbox, including checking oil levels, seals, and bolts to diagnose issues like leakage, excessive heat, or lack of rotation.
Daewoo doosan dx210 w wheel excavator service repair manualfjjsekwsxkdmmem
This document provides safety information for Doosan wheel excavators. It outlines general safety essentials, labels the location of safety labels on the machine, and summarizes safety precautions for lifting loads. It warns that unauthorized modifications can create safety hazards and lists some general hazard information, including following all safety rules and precautions, only allowing trained operators, and ensuring all safety features are used properly.
New holland w80 wheel loader service repair manualuudfjjjskkemmd
This workshop manual provides instructions for repairing wheel loaders. It outlines safety procedures and contains sections covering the diesel engine, transmission, axles, steering, brake system, hydraulic system, electrical system, frame, and other components. Technicians should carefully follow the repair instructions and use only original spare parts to safely and properly service the wheel loaders.
Doosan dl350 wheel loader service repair manualfjjjskekksmem
This document provides safety information for wheel loaders. It discusses general safety essentials including following all safety rules and precautions, keeping safety features in good working order, and not making unauthorized modifications. It describes hazards inside the operator's compartment and proper clothing and protective equipment. It also covers topics like mounting and dismounting safely, asbestos dust prevention, and general rules for safe operation and maintenance.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Doosan dl250 wheel loader service repair manualfjjjskekksmem
This document provides safety information for wheel loaders, including general safety essentials, locations of safety labels, unauthorized modifications, general hazards, safety procedures before starting the engine, safe machine operation, maintenance safety, battery safety, towing safety, and shipping/transportation safety. Operators and maintenance personnel are instructed to read this manual thoroughly before operating or servicing the machine to understand safety precautions and procedures. Unsafe practices could result in serious injury or death.
Daewoo doosan dx190 w excavator service repair manual (serial number 5001 and...fjseazqkkdmmem
The document provides safety information and instructions for removing and installing the cabin shell on a Doosan wheel excavator. It begins by listing applicable models and emphasizing safety precautions. It then provides step-by-step instructions to disconnect wiring, remove covers and brackets, and lift the cabin shell off using slings attached at lift points. Reinstallation follows the removal steps in reverse order. Precautions are given such as using lifting equipment rated for the cabin weight of approximately 700 pounds.
Daewoo doosan dx190 w excavator service repair manual (serial number 5001 and...udjfjjsekekkem
The document provides safety information and instructions for removing and installing the cabin shell on a Doosan wheel excavator. It begins by listing applicable models and emphasizing safety precautions. It then provides step-by-step instructions to disconnect wiring, remove covers and brackets, and lift the cabin shell off using slings attached at lift points. Reinstallation follows the removal steps in reverse order. Precautions are given such as using lifting equipment rated for the cabin weight of approximately 700 pounds.
Daewoo doosan dx210 w excavator service repair manual (serial number 5001 and...udjfjjsekekkem
The document provides maintenance information for a swing bearing and swing reduction gear used in a Doosan wheel excavator:
- Instructions are given for measuring swing bearing axial and lateral play to check for wear.
- The swing reduction gear reduces the swing motor RPM to increase torque for fast turning. It has a two-stage planetary gear configuration.
- Troubleshooting tips and removal instructions are provided for the swing reduction gearbox, including checking oil levels, seals, and bolts to diagnose issues like leakage, excessive heat, or lack of rotation.
Daewoo doosan dx210 w wheel excavator service repair manualfjjsekwsxkdmmem
This document provides safety information for Doosan wheel excavators. It outlines general safety essentials, labels the location of safety labels on the machine, and summarizes safety precautions for lifting loads. It warns that unauthorized modifications can create safety hazards and lists some general hazard information, including following all safety rules and precautions, only allowing trained operators, and ensuring all safety features are used properly.
New holland w80 wheel loader service repair manualuudfjjjskkemmd
This workshop manual provides instructions for repairing wheel loaders. It outlines safety procedures and contains sections covering the diesel engine, transmission, axles, steering, brake system, hydraulic system, electrical system, frame, and other components. Technicians should carefully follow the repair instructions and use only original spare parts to safely and properly service the wheel loaders.
Doosan dl350 wheel loader service repair manualfjjjskekksmem
This document provides safety information for wheel loaders. It discusses general safety essentials including following all safety rules and precautions, keeping safety features in good working order, and not making unauthorized modifications. It describes hazards inside the operator's compartment and proper clothing and protective equipment. It also covers topics like mounting and dismounting safely, asbestos dust prevention, and general rules for safe operation and maintenance.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Doosan dl250 wheel loader service repair manualfjjjskekksmem
This document provides safety information for wheel loaders, including general safety essentials, locations of safety labels, unauthorized modifications, general hazards, safety procedures before starting the engine, safe machine operation, maintenance safety, battery safety, towing safety, and shipping/transportation safety. Operators and maintenance personnel are instructed to read this manual thoroughly before operating or servicing the machine to understand safety precautions and procedures. Unsafe practices could result in serious injury or death.
Daewoo doosan dx190 w excavator service repair manual (serial number 5001 and...fjseazqkkdmmem
The document provides safety information and instructions for removing and installing the cabin shell on a Doosan wheel excavator. It begins by listing applicable models and emphasizing safety precautions. It then provides step-by-step instructions to disconnect wiring, remove covers and brackets, and lift the cabin shell off using slings attached at lift points. Reinstallation follows the removal steps in reverse order. Precautions are given such as using lifting equipment rated for the cabin weight of approximately 700 pounds.
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 607700 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 926 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
The document provides instructions for identifying JCB rough terrain forklifts through identification plates listing the machine and serial numbers, describes the manual's section numbering and terminology, and lists standard torque settings and service tools needed for maintenance.
Jcb 926 rough terrain fork lift service repair manual serial no. 602000 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 50001 ...jjksekfksmem
The document provides safety instructions for maintenance of track excavators. It lists applicable models, describes different signal words used in safety messages to indicate the seriousness of hazards, and the location and purpose of safety decals. It stresses the operator's responsibility for safe operation, following all safety rules and instructions when operating or servicing the machine. It highlights the importance of using recommended work tools and attachments, and not exceeding maximum operating weights.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 a...jjksekfksmem
The document provides instructions for removing the cabin from an excavator. It outlines 28 steps to disconnect wiring, remove covers, ducts and brackets. Key steps include relieving hydraulic pressure, removing the safety lever, disconnecting the battery, and removing bolts and nuts securing the cabin floor and mounts. Safety warnings are provided to never modify the ROPS cabin and always wear a seatbelt for rollover protection.
Daewoo doosan dx170 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1) This document provides safety guidelines and precautions for operating Doosan wheel excavators.
2) Safety labels are located on the machine to highlight key hazards, and operating procedures must follow safety summaries to prevent injury.
3) Unauthorized modifications to the machine are prohibited, and general hazards include being struck by moving parts, electrocution, and tipping hazards.
Daewoo doosan dx160 w excavator service repair manual (serial number 5001 and...jjksekfksmem
The document provides instructions for reassembling the swing reduction gear of a Doosan wheel excavator. It describes disassembling and cleaning the various parts, and reassembling components such as the carrier subassemblies, main assembly, and motor. Safety precautions are provided, noting that tools and equipment must be in good working order and lifting equipment used must be capable of safely handling loads. Personnel are responsible for their own safety by following the recommended procedures.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 607700 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 926 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
The document provides instructions for identifying JCB rough terrain forklifts through identification plates listing the machine and serial numbers, describes the manual's section numbering and terminology, and lists standard torque settings and service tools needed for maintenance.
Jcb 926 rough terrain fork lift service repair manual serial no. 602000 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 50001 ...jjksekfksmem
The document provides safety instructions for maintenance of track excavators. It lists applicable models, describes different signal words used in safety messages to indicate the seriousness of hazards, and the location and purpose of safety decals. It stresses the operator's responsibility for safe operation, following all safety rules and instructions when operating or servicing the machine. It highlights the importance of using recommended work tools and attachments, and not exceeding maximum operating weights.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 a...jjksekfksmem
The document provides instructions for removing the cabin from an excavator. It outlines 28 steps to disconnect wiring, remove covers, ducts and brackets. Key steps include relieving hydraulic pressure, removing the safety lever, disconnecting the battery, and removing bolts and nuts securing the cabin floor and mounts. Safety warnings are provided to never modify the ROPS cabin and always wear a seatbelt for rollover protection.
Daewoo doosan dx170 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1) This document provides safety guidelines and precautions for operating Doosan wheel excavators.
2) Safety labels are located on the machine to highlight key hazards, and operating procedures must follow safety summaries to prevent injury.
3) Unauthorized modifications to the machine are prohibited, and general hazards include being struck by moving parts, electrocution, and tipping hazards.
Daewoo doosan dx160 w excavator service repair manual (serial number 5001 and...jjksekfksmem
The document provides instructions for reassembling the swing reduction gear of a Doosan wheel excavator. It describes disassembling and cleaning the various parts, and reassembling components such as the carrier subassemblies, main assembly, and motor. Safety precautions are provided, noting that tools and equipment must be in good working order and lifting equipment used must be capable of safely handling loads. Personnel are responsible for their own safety by following the recommended procedures.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Hand Gesture Control Robotic Arm using image processing.pptx
Daewoo doosan dx140 w excavator service repair manual (serial number 5001 and up)
1. K1024899E Shop Manual
Copyright 2006 DOOSAN
DOOSAN reserves the right to improve its products continuously, delivering the best possible product to
the marketplace. These improvements can be implemented at any time with no obligation to change
materials previously sold. It is recommended that consumers periodically contact their distributors for most
recent documentation on purchased equipment.
This documentation may include attachments and optional equipment not available in your machine's
package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Shop Manual
K1024899E
Serial Number 5001 and Up
DX140W/DX160W
2. Table of Contents
Page I
1Table of Contents
Safety
Wheel Excavator Safety ....................................................................... SP000909
Specifications
Specification for DX140W/DX160W ..................................................... SP000911
General Maintenance
General Maintenance Procedures........................................................ SP000016
Standard Torques................................................................................. SP000813
Upper Structure
Cabin .................................................................................................... SP000916
Counterweight....................................................................................... SP000917
Fuel Tank.............................................................................................. SP000918
Fuel Transfer Pump.............................................................................. SP000021
Swing Bearing....................................................................................... SP000920
Swing Reduction Gear.......................................................................... SP000921
Lower Structure and Chassis
Ram Lock Valve.................................................................................... SP000923
Selector Valve....................................................................................... SP000926
Solenoid Valve...................................................................................... SP000928
Double Pilot Check Valve ..................................................................... SP000927
Front Axle ............................................................................................. SP000929
Rear Axle.............................................................................................. SP000930
Engine and Drivetrain
Transmission ........................................................................................ SP000962
Drive Coupling (Main Pump)................................................................. SP000963
3. Table of Contents
Page II
Hydraulics
Hydraulic System Troubleshooting, Testing and Adjustment ........... SP000983
Accumulator.......................................................................................... SP000984
Center Joint (Swivel)........................................................................... SP000919
Cylinders............................................................................................... SP000030
Main Control Valve.............................................................................. SP001059
Swing Motor......................................................................................... SP000985
Travel Motor......................................................................................... SP000986
Counterbalance Valve.......................................................................... SP000991
Main Pump and PTO.......................................................................... SP000988
Gear Pump........................................................................................... SP000989
Service Brake Supply Valve............................................................... SP000990
Dozer Control Valve............................................................................ SP000992
Steering Valve...................................................................................... SP000993
Accelerator Pedal Valve (Hydraulic)................................................... SP000995
One Spool Valve ................................................................................. SP000996
Remote Control Valve (Work Lever / Joystick) ................................ SP000069
Breaker EPPR Valve (Opt)................................................................. SP000192
Service Brake Pedal Valve................................................................. SP001006
Solenoid Valve Assembly.................................................................... SP000997
Hydraulic Schematic ............................................................................ SP001002
Electrical System
Electrical System ................................................................................. SP000998
Electrical Schematic............................................................................. SP001003
Attachments
Boom and Arm .................................................................................... SP001000
Bucket................................................................................................... SP001001
5. SP000909
Page 5
Wheel Excavator Safety
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION!
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling the load.
Remember, that ultimately safety is your own
responsibility.
MODEL SERIAL NUMBER RANGE
DX140W 5001 and Up
DX160W 5001 and Up
6. SP000909
Page 7
Wheel Excavator Safety
TO THE OPERATOR OF A
DOOSAN EXCAVATOR
Please respect the importance of taking responsibility for your
own safety, and that of other people who may be affected by
your actions.
The safety information on the following pages is organized into
the following sections:
1. “General Safety Essentials” on page -11
2. “Location of Safety Labels” on page -12
3. “Summary of Safety Precautions for Lifting in Digging
Mode” on page -13
4. “Unauthorized Modifications” on page -14
5. “General Hazard Information” on page -14
6. “Before Starting Engine” on page -23
7. “Machine Operation” on page -27
8. “Maintenance” on page -34
9. “Battery” on page -43
10. “Towing” on page -45
11. “Shipping and Transportation” on page -46
12. “Lifting with Sling” on page -46
DANGER!
Unsafe use of the excavator could lead to serious injury or
death. Operating procedures, maintenance and equipment
practices or traveling or shipping methods that do not
follow the safety guidelines on the following pages could
cause serious, potentially fatal injuries or extensive
damage to the machine or nearby property.
7. SP000909Wheel Excavator Safety
Page 8
WARNING!
Improper operation and maintenance of this machine can
be hazardous and could result in serious injury or death.
Operator and maintenance personnel should read this
manual thoroughly before beginning operation or
maintenance.
Keep this manual in the storage compartment to the rear of
the operator's seat, and have all personnel involved in
working on the machine read the manual periodically.
Some actions involved in operation and maintenance of the
machine can cause a serious accident, if they are not done
in a manner described in this manual.
The procedures and precautions given in this manual apply
only to intended uses of the machine.
If you use your machine for any unintended uses that are
not specifically prohibited, you must be sure that it is safe
for any others. In no event should you or others engage in
prohibited uses or actions as described in this manual.
DOOSAN delivers machines that comply with all applicable
regulations and standards of the country to which it has
been sent. If this machine has been purchased in another
country or purchased from someone in another country, it
may lack certain safety devices and specifications that are
necessary for use in your country. If there is any question
about whether your product complies with the applicable
standards and regulations of your country, consult
DOOSAN or your DOOSAN distributor before operating the
machine.
8. SP000909
Page 9
Wheel Excavator Safety
Learn the Signal Words Used with the
Safety Alert Symbol
The words "CAUTION," "WARNING," and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle," no
matter which signal word appears next to the "Exclamation
Point" symbol.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions.
This is the Safety Alert Symbol. Wherever it appears in this
manual or on safety signs on the machine you should be
alert to the potential for personal injury or accidents.
Always observe safety precautions and follow
recommended procedures.
CAUTION!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in serious injury or death. It may
also be used to alert against highly unsafe practice.
DANGER!
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may detonate or explode if handled or treated carelessly.
9. SP000909Wheel Excavator Safety
Page 10
Safety precautions are described in SAFETY from page -12 on.
DOOSAN cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of any procedures,
contact a DOOSAN distributor.
10. SP000921
Page 3
Swing Reduction Gear
Table of Contents
Swing Reduction Gear
Safety Precautions ............................................... 5
Applicable Models ................................................ 5
General Description.............................................. 7
Theory of Operation ........................................................ 7
Reassembly.......................................................... 8
Parts List ......................................................................... 8
Shrinkage Fitting of Shaft and Flexible Bearing . 10
Reassembly of Carrier Sub ................................ 13
Assembly of the Main ......................................... 20
Test..................................................................... 32
Reassembly of motor.......................................... 35
11. SP000921
Page 5
Swing Reduction Gear
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION!
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling the load.
Remember, that ultimately safety is your own
responsibility.
MODEL SERIAL NUMBER RANGE
DX140W 5001 and Up
DX160W 5001 and Up
12. SP000921
Page 7
Swing Reduction Gear
GENERAL DESCRIPTION
Theory of Operation
The swing motor final drive is a two-stage planetary gearbox
with two planet gears, two sun gears and two-stage output
reduction. The planetary gear engages the ring gear. The pinion
gear is connected to the output shaft and spline.
The final drive reduces swing motor rpm to increase swing motor
output torque. The available maximum swing speed provides a
fast turning rate for efficient, rapid work cycling with more than
adequate power for good acceleration.
14. SP000921
Page 9
Swing Reduction Gear
Reference
Number
Description
1 Casing
2 Driveshaft
3 Ring Gear
4 Planetary Gear
5 Sun Gear 2
6 Planetary Gear
7 Sun Gear 1
8 Carrier 2
9 Carrier 1
10 Pin Assembly
11 Pin Assembly
12 Adjustment Washer
13 Adjustment Washer
14 Level Bar
15 Level Gauge Piping
16 Pin
17 Roller Bearing
18 Roller Bearing
19 Socket Bolt
20 Oil Seal
21 Plug
22 Plug
23 Spring Pin
24 Retainer Ring
25 Retainer Ring
26 Ring
27 Spring Pin
28 Support Plate
29 Screw Bolt
Reference
Number
Description
15. SP000921Swing Reduction Gear
Page 10
SHRINKAGE FITTING OF SHAFT
AND FLEXIBLE BEARING
1. Washing of shaft
Remove fluids like anticorrosive fluid applied to the shaft
and use an air conditioner to remove foreign substances.
2. Insert the support plate and the NILOS ring into the
prepared shaft as shown in the figure and heat bearings
(#22314, 2109-1041) on the heater.
Figure 2
Figure 3
16. SP000921
Page 11
Swing Reduction Gear
3. When bearing is heated up to 90°C - 100°C, remove it from
the heater, hold it with both hands, and insert it into the
shaft evenly.
To do so, slowly insert bearing 4-5 mm that it seats itself
and then push it strongly to contact the NILOS ring.
4. After assembling the bearing, let it cooled fully in the air for
1 to 2 hours.
Figure 4
Figure 5
Figure 6
CAUTION!
Do not heat bearing above 120°C.
18. SP000921
Page 13
Swing Reduction Gear
REASSEMBLY OF CARRIER SUB
1. Washing of carrier
Put in a steam washer the carrier whose burr is removed
completely with corner face-milling and place it on the
assembly die after checking if there is not left any foreign
substance in it.
2. Washing of planetary gear
Check if planetary gear parts are washed or dented, and
put them on the assembly die.
3. Reassembly of carrier #1 assembly
A. Place the carrier #1 assembly on the assembly jig,
insert the thrust washer in it, and fix it to the hole of
carrier.
B. Put a pressure jig on the pin and use a press to insert
it.
Figure 8
Figure 9
Figure 10
19. SP000921Swing Reduction Gear
Page 14
C. Place the carrier with the pin being pressed in on the
jig vertically, use a hammer to insert the spring pin
(ø6 x 25 liter§), and drain valve it.
Figure 11
Figure 12
Figure 13
Figure 14
20. SP000921
Page 15
Swing Reduction Gear
D. Assemble 2 other parts in the same way.
E. Put the thrust washer (B) in the middle of the carrier
with all of pins being pressed in.
F. Insert planetary gear #1 in 3 pins and put two thrust
washers on them as shown in the figure.
Figure 15
Figure 16
Figure 17
Figure 18
21. SP000921Swing Reduction Gear
Page 16
G. Install a retaining ring (ø30, C type, and for shaft) on
each and check if gear rotates smooth.
Figure 19
Figure 20
Figure 21
22. SP000921
Page 17
Swing Reduction Gear
4. Reassembly of carrier #2 assembly
A. Place the carrier #2 assembly on the assembly die,
attach the thrust washer on a side of the planetary
gear #2, and insert it in the carrier with the washer
facing downward.
B. Place the pin #2 assembly on the assembly die that
the pinhole of the spring faces the same direction as
the carrier shaft, and insert it by pressing with hands
or gently knocking with hammer.
Figure 22
CAUTION!
The calibers of gear and washer should be fit to
holes of the carrier pins.
Figure 23
Figure 24
Figure 25
23. SP000921Swing Reduction Gear
Page 18
C. After inserting the pin assembly, set the carrier
vertically as shown in the figure, insert the spring pin
(ø6 x 25 mm) by gently knocking with hammer, and
push it to the end with a jig.
Figure 26
Figure 27
Figure 28
Figure 29
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. SP000921
Page 19
Swing Reduction Gear
D. Use a punch to drain valve 2 or 3 places near hole
where spring pin is inserted.
E. Assemble other 3 parts and check if the gear runs
smooth.
Figure 30
Figure 31
Figure 32
Figure 33
26. SP000921Swing Reduction Gear
Page 20
ASSEMBLY OF THE MAIN
1. Washing of casing and other parts
Wash casing and other parts with steam to remove
remaining foreign substance after casting and machining.
• Washing fluid: PK6540 (alkali)
• Concentration : 3-5%
• Temperature: 60 - 70°C
2. Assembly of shaft and bearing
A. Fix the washed casing on the turnover machine and
rotate the turnover machine that the press fitting side
of the shaft looks upward.
B. Place the driveshaft assembly where bearing
(#22314) is assembled on the case assembly, put a
press jig on it, and use press to insert it.
Figure 34
Figure 35
Figure 36
CAUTION!
Make sure that bearing is not tilted for correct
press fitting before using press.
27. SP000921
Page 21
Swing Reduction Gear
C. Remove the bearing press jig, align the support plate
with the bolt tap of the case, and install 6 Loctite
(#262) applied flat head bolts (M8 x 15 mm) and
tighten them with torque wrench (torque :320 kg•cm).
Figure 37
Figure 38
Figure 39
Figure 40