The document provides instructions for removing the cabin from an excavator. It outlines 28 steps to disconnect wiring, remove covers, ducts and brackets. Key steps include relieving hydraulic pressure, removing the safety lever, disconnecting the battery, and removing bolts and nuts securing the cabin floor and mounts. Safety warnings are provided to never modify the ROPS cabin and always wear a seatbelt for rollover protection.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...ufjdjfjksekkmm
This document provides safety instructions for maintenance of track excavators. It lists applicable models, discusses important safety messages including signal words and safety decals, and provides general safety guidelines. Key points include only allowing trained personnel to operate and maintain the equipment, knowing the machine and its capabilities, using recommended work tools and attachments, and ensuring all guards and shields are in place. Safety of the operator and others on the worksite is the top priority.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ufjjdjkksdekmd
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...dufjdjskkemm
This document provides safety instructions for maintenance of track excavators. It covers applicable models, safety messages including signal words and safety alert symbols, and general safety topics such as safe operation being the operator's responsibility, knowing your machine, using proper work tools and attachments, and safety while performing maintenance. Maintenance should only be performed by trained personnel who have read and understand the safety instructions in this document and in the operation and maintenance manual.
Daewoo doosan dx160 lc 3 excavator service repair manual serial number 1001 a...ufjjdjkksdekmd
The document is a shop manual that provides instructions for maintenance and repair of excavator components. It includes sections on safety procedures, specifications, general maintenance, and maintenance of specific systems and components such as the upper structure, lower structure, engine, hydraulics, electrical system, and attachments. The section summarized here provides instructions for disassembling and reassembling the swing reduction gear of the excavator. It details the parts, describes how to shrink fit the shaft and flexible bearing, and explains the process for reassembling the carrier subassemblies.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ofpsdjksemmds
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...dfjkskeeplol
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models from 1001 serial numbers up, lists important safety messages and symbols, and provides general safety guidelines. Proper work tools and attachments are emphasized, and only trained personnel should operate or maintain the equipment. Failure to follow safety precautions can result in death or serious injury.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...dfjkskeeplol
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models, safety messages and decals, general safety practices, and the importance of understanding machine capabilities and using proper work tools and attachments. Safe operation is the operator's responsibility, and only trained personnel should operate or maintain the equipment. Guards and shields must be in place and in good condition.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ufjjdjkksdekmd
This document provides safety instructions for maintenance of track excavators. It covers general safety messages and signals, safety decals, general safety practices, the importance of understanding machine capabilities and limitations, and using only recommended work tools and attachments. Safe operation and maintenance is the responsibility of the operator, who must be trained and follow all safety procedures.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...ufjdjfjksekkmm
This document provides safety instructions for maintenance of track excavators. It lists applicable models, discusses important safety messages including signal words and safety decals, and provides general safety guidelines. Key points include only allowing trained personnel to operate and maintain the equipment, knowing the machine and its capabilities, using recommended work tools and attachments, and ensuring all guards and shields are in place. Safety of the operator and others on the worksite is the top priority.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ufjjdjkksdekmd
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...dufjdjskkemm
This document provides safety instructions for maintenance of track excavators. It covers applicable models, safety messages including signal words and safety alert symbols, and general safety topics such as safe operation being the operator's responsibility, knowing your machine, using proper work tools and attachments, and safety while performing maintenance. Maintenance should only be performed by trained personnel who have read and understand the safety instructions in this document and in the operation and maintenance manual.
Daewoo doosan dx160 lc 3 excavator service repair manual serial number 1001 a...ufjjdjkksdekmd
The document is a shop manual that provides instructions for maintenance and repair of excavator components. It includes sections on safety procedures, specifications, general maintenance, and maintenance of specific systems and components such as the upper structure, lower structure, engine, hydraulics, electrical system, and attachments. The section summarized here provides instructions for disassembling and reassembling the swing reduction gear of the excavator. It details the parts, describes how to shrink fit the shaft and flexible bearing, and explains the process for reassembling the carrier subassemblies.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ofpsdjksemmds
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...dfjkskeeplol
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models from 1001 serial numbers up, lists important safety messages and symbols, and provides general safety guidelines. Proper work tools and attachments are emphasized, and only trained personnel should operate or maintain the equipment. Failure to follow safety precautions can result in death or serious injury.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...dfjkskeeplol
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models, safety messages and decals, general safety practices, and the importance of understanding machine capabilities and using proper work tools and attachments. Safe operation is the operator's responsibility, and only trained personnel should operate or maintain the equipment. Guards and shields must be in place and in good condition.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ufjjdjkksdekmd
This document provides safety instructions for maintenance of track excavators. It covers general safety messages and signals, safety decals, general safety practices, the importance of understanding machine capabilities and limitations, and using only recommended work tools and attachments. Safe operation and maintenance is the responsibility of the operator, who must be trained and follow all safety procedures.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ujfjjkskkmmem
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ofpsdjksemmds
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ujfjjkskkmmem
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models, safety messages and decals, general safety practices, and the importance of understanding machine capabilities and using proper work tools and attachments. Safe operation is the operator's responsibility, and only trained personnel should operate or maintain the equipment.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...ufsiekdolskek
This document provides safety instructions for maintenance of track excavators. It lists applicable models, discusses important safety messages including signal words and safety decals, and provides general safety guidelines. Key points include only allowing trained personnel to operate and maintain the equipment, knowing the machine and its capabilities, using recommended work tools and attachments, and ensuring all guards and shields are in place. Safety of the operator and others on the worksite is the top priority.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...kfkseekmmm
The document provides instructions for maintaining and servicing the swing bearing and track assembly on a DX380LC-3 excavator. It describes how to measure axial play and lateral play in the swing bearing to check its condition. Disassembly and assembly procedures are outlined for the swing bearing. Instructions are also provided for checking and adjusting track tension, including recommended clearance distances between the track and side frame for different operating conditions. Safety warnings emphasize the need for two people, one operating controls, when measuring track tension.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...dufjdjskkemm
This document provides safety instructions for maintenance of track excavators. It covers applicable models, safety messages including signal words and safety alert symbols, and general safety topics such as safe operation being the operator's responsibility, knowing your machine, using proper work tools and attachments, and safety while performing maintenance. Maintenance should only be performed by trained personnel who have read and understand the safety instructions in this document and in the operation and maintenance manual.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...ufsikkdjskemds
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...ufsikkdjskemds
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and procedures for checking and adjusting track tension. Track tension should be checked regularly and adjusted based on specifications to account for wear and working conditions. The document also provides inspection limits and tolerances for lower track frame components to determine repair or replacement needs. Safety precautions are outlined for working on pressurized components and adjusting track tension.
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
More Related Content
Similar to Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 and up
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 50001 ...ujfjjkskkmmem
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ofpsdjksemmds
1. The document provides maintenance instructions for removing and installing the fuel tank on a DX140LC-3 excavator.
2. Key steps include draining the fuel, disconnecting fuel lines and electrical connections, removing mounting bolts and brackets, and lifting the tank out of position using eyebolts.
3. Installation involves setting the tank in position, installing mounting bolts and spacers, and adding shims to prevent rocking before tightening the bolts.
Daewoo doosan dx140 lc 3 excavator service repair manual serial number 1001 a...ujfjjkskkmmem
This document provides safety instructions for maintenance of DOOSAN track excavators. It covers applicable models, safety messages and decals, general safety practices, and the importance of understanding machine capabilities and using proper work tools and attachments. Safe operation is the operator's responsibility, and only trained personnel should operate or maintain the equipment.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...ufsiekdolskek
This document provides safety instructions for maintenance of track excavators. It lists applicable models, discusses important safety messages including signal words and safety decals, and provides general safety guidelines. Key points include only allowing trained personnel to operate and maintain the equipment, knowing the machine and its capabilities, using recommended work tools and attachments, and ensuring all guards and shields are in place. Safety of the operator and others on the worksite is the top priority.
Daewoo doosan dx380 lc 3 excavator service repair manual (serial number 10001...kfkseekmmm
The document provides instructions for maintaining and servicing the swing bearing and track assembly on a DX380LC-3 excavator. It describes how to measure axial play and lateral play in the swing bearing to check its condition. Disassembly and assembly procedures are outlined for the swing bearing. Instructions are also provided for checking and adjusting track tension, including recommended clearance distances between the track and side frame for different operating conditions. Safety warnings emphasize the need for two people, one operating controls, when measuring track tension.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...dufjdjskkemm
This document provides safety instructions for maintenance of track excavators. It covers applicable models, safety messages including signal words and safety alert symbols, and general safety topics such as safe operation being the operator's responsibility, knowing your machine, using proper work tools and attachments, and safety while performing maintenance. Maintenance should only be performed by trained personnel who have read and understand the safety instructions in this document and in the operation and maintenance manual.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...ufsikkdjskemds
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...ufsikkdjskemds
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and procedures for checking and adjusting track tension. Track tension should be checked regularly and adjusted based on specifications to account for wear and working conditions. The document also provides inspection limits and tolerances for lower track frame components to determine repair or replacement needs. Safety precautions are outlined for working on pressurized components and adjusting track tension.
Similar to Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 and up (10)
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 607700 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 926 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
The document provides instructions for identifying JCB rough terrain forklifts through identification plates listing the machine and serial numbers, describes the manual's section numbering and terminology, and lists standard torque settings and service tools needed for maintenance.
Jcb 926 rough terrain fork lift service repair manual serial no. 602000 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 50001 ...jjksekfksmem
The document provides safety instructions for maintenance of track excavators. It lists applicable models, describes different signal words used in safety messages to indicate the seriousness of hazards, and the location and purpose of safety decals. It stresses the operator's responsibility for safe operation, following all safety rules and instructions when operating or servicing the machine. It highlights the importance of using recommended work tools and attachments, and not exceeding maximum operating weights.
Daewoo doosan dx170 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1) This document provides safety guidelines and precautions for operating Doosan wheel excavators.
2) Safety labels are located on the machine to highlight key hazards, and operating procedures must follow safety summaries to prevent injury.
3) Unauthorized modifications to the machine are prohibited, and general hazards include being struck by moving parts, electrocution, and tipping hazards.
Daewoo doosan dx160 w excavator service repair manual (serial number 5001 and...jjksekfksmem
The document provides instructions for reassembling the swing reduction gear of a Doosan wheel excavator. It describes disassembling and cleaning the various parts, and reassembling components such as the carrier subassemblies, main assembly, and motor. Safety precautions are provided, noting that tools and equipment must be in good working order and lifting equipment used must be capable of safely handling loads. Personnel are responsible for their own safety by following the recommended procedures.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualjjksekfksmem
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 and up
1. Original InstructionsCopyright DOOSAN 2012
Serial Number 1001 and Up
Serial Number 50001 and Up (Europe Only)
Shop Manual
DX180LC-3 Excavator
950106-00417E
April 2012
DOOSAN and the DOOSAN logo are registered
trademarks of DOOSAN Corporation in the United
States and various other countries around the
world.
2. Table of Contents
Page I
1Table of Contents
Safety
Track Excavator Maintenance Safety................................................... SP002322
Specifications
Specifications for DX180LC-3............................................................... SP002521
General Maintenance
General Maintenance Instructions........................................................ SP002454
Standard Torques................................................................................. SP002404
Upper Structure
Cabin .................................................................................................... SP002324
Counterweight....................................................................................... SP002522
Fuel Tank.............................................................................................. SP002523
Fuel Transfer Pump (Option)................................................................ SP002537
Swing Bearing....................................................................................... SP002329
Lower Structure and Chassis
Track Assembly .................................................................................... SP002524
Engine and Drivetrain
Engine Coolant Heater (Option) ........................................................... SP002328
Drive Coupling (Main Pump)................................................................. SP002525
Hydraulics
Hydraulic System Troubleshooting, Testing and Adjustment ............... SP002608
Accumulator.......................................................................................... SP002455
Center Joint (Swivel)............................................................................. SP002456
Cylinders............................................................................................... SP002579
3. Table of Contents
Page II
Swing Device........................................................................................ SP002498
Travel Device........................................................................................ SP002514
Main Pump............................................................................................ SP002531
Gear Pump ........................................................................................... SP002500
Main Control Valve ............................................................................... SP002584
Remote Control Valve (Work Lever / Joystick)..................................... SP002395
Travel Control Valve (with Damper)...................................................... SP002381
Solenoid Valve Assembly ..................................................................... SP002406
Breaker EPPR Valve (Option) .............................................................. SP002458
Dozer Valve .......................................................................................... SP002529
Hydraulic Schematic (DX180LC-3)....................................................... SP002532
Electrical System
Electrical System .................................................................................. SP002337
Electrical Schematic ............................................................................. SP002508
Attachments
Boom and Arm...................................................................................... SP002533
Bucket................................................................................................... SP002506
5. SP002322
Page 5
Track Excavator Maintenance Safety
SAFETY INSTRUCTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
WARNING
AVOID DEATH OR SERIOUS INJURY
Instructions are necessary before operating or servicing
machine. Read and understand the Operation and
Maintenance Manual and signs (decals) on machine. Follow
warnings and instructions in the manuals when making
repairs, adjustments or servicing. Check for correct
function after adjustments repairs or service. Untrained
operators and failure to follow instructions can cause death
or serious injury.
MODEL SERIAL NUMBER RANGE
DX140LC-3 1001 and Up, 50001 and Up
DX180LC-3 1001 and Up, 50001 and Up
DX225LC-3 1001 and Up, 50001 and Up
DX255LC-3 1001 and Up, 50001 and Up
DX300LC-3 1001 and Up, 50001 and Up
DX340LC-3 1001 and Up, 10001 and Up
DX350LC-3 1001 and Up, 10001 and Up
DX380LC-3 10001 and Up
DX420LC-3 10001 and Up
DX490LC-3 10001 and Up
DX530LC-3 10001 and Up
6. SP002322Track Excavator Maintenance Safety
Page 6
SAFETY MESSAGES
Safety messages and safety decals included in this manual and
on the machine provide instructions how to operate, service and
maintain the machine. Safety messages and safety decals
indicate potential hazards and describe safety precautions
required to avoid hazards. Operator and maintenance personnel
should read and understand these safety messages and decals
before beginning operation or maintenance.
Signal Words
The signal words "DANGER", "WARNING", "CAUTION" are
used throughout safety messages and safety decals in this
manual or on the machine. They indicate an existence of, and
the relative seriousness of, a hazard. All three indicate that a
safety risk is involved. Observe the precautions indicated
whenever a Safety Alert Symbol is present, no matter which
signal word appears next to it.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions.
This is a Safety Alert Symbol. Wherever it appears in this
manual or on safety decals on the machine, you must be
alert to the potential for personal injury or accidents.
Always observe safety precautions and follow
recommended procedures.
DANGER
DANGER - This signal word is used on safety messages and
safety labels and indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING - This signal word is used on safety messages and
safety labels and indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
7. SP002322
Page 7
Track Excavator Maintenance Safety
Other Signal Words
In addition to safety signal words, the following signal words are
used to indicate proper and effective use of machine.
The word "NOTE" identifies information for effective use.
SAFETY DECALS
Location of safety labels (decals) can vary from unit to unit.
Refer to appropriate Operation and Maintenance Manual, and
parts manual for your unit.
Always replace damaged or faded decals.
CAUTION
CAUTION - This signal word is used on safety messages
and safety labels and indicates a potentially hazardous
situation which, if not avoided, could result in minor or
moderate injury.
IMPORTANT
This signal word identifies procedures which must be
followed to avoid damage to machine.
8. SP002322Track Excavator Maintenance Safety
Page 8
GENERAL
Safe Operation is Operator's
Responsibility
Only trained and authorized personnel should operate and
maintain the machine.
Follow all safety rules, regulations and instructions when
operating or performing maintenance on machine.
• Do not operate machine if you are under the influence of
drugs or alcohol. An operator who is taking prescription
drugs must get medical advice to determine if he or she
can safely operate a machine.
• When working with other personnel on a work site, be sure
that all personnel know nature of work and understand all
hand signals that are to be used.
• Be sure that all guards and shields are installed in their
proper location. Have guards and shields repaired or
replaced immediately if damaged.
• Be sure that you understand the use and maintenance of
all safety features such as safety lock lever and seat belt.
Use them properly.
• Never remove, modify or disable any safety features.
Always keep them in good operating condition.
• Always check for and know the location of underground
and overhead utility lines before excavating.
• Failure to use and maintain safety features according to
instructions in this manual, Safety Manual and Shop
Manual can result in death or serious injury.
Know Your Machine
Know how to operate your machine. Know the purpose of all
controls, gauges, signals, indicators and monitor displays. Know
the rated load capacity, speed range, braking and steering
characteristics, turning radius and operating clearances. Keep in
mind that rain, snow, ice, loose gravel, soft ground, slopes etc.,
can change operating capabilities of your machine.
Proper Work Tools and Attachments
Only use work tools and attachments that are recommended by
DOOSAN for use on DOOSAN machines. When installing and
using optional attachments, read instruction manual for
attachment, and general information related to attachments in
this manual. Because DOOSAN cannot anticipate, identify or
test all attachments that owners may want to install on their
machines, contact DOOSAN for written authorization and
9. SP002322
Page 9
Track Excavator Maintenance Safety
approval of attachments, and their compatibility with optional
kits.
Attachments and attachment control systems that are
compatible with the machine are required for safe and reliable
machine operation. Do not exceed maximum operating weight
(machine weight plus attachment) that is listed on ROPS
certification plate.
Make sure that all guards and shields are in place on machine
and on work tool. Depending on type or combination of work
equipment, there is a potential that work equipment could
interfere with the cabin or other parts of machine. Before using
unfamiliar work equipment, check if there is any potential of
interference, and operate with caution.
While you are performing any maintenance, testing, or
adjustments to attachments, stay clear of the following areas:
cutting edges, pinch points, and crushing surfaces.
Never use attachment as a work platform or manlift.
Contact your DOOSAN distributor about auxiliary hydraulic kits
for attachments installation. If you are in doubt about
compatibility of a particular attachment with a machine, consult
your DOOSAN distributor.
Pressurized Fluids
Pressurized air or fluids can cause debris and/or fluids to be
blown out. This could result in death or serious injury.
Immediately after operations are stopped, coolant, engine oil,
and hydraulic oil are at their highest temperatures and the
radiator and hydraulic tank are still under pressure. Always wait
for temperature to cool down. Follow specified procedures when
attempting to remove caps, drain oil or coolant, or replacing
filters. Always wait for temperature to cool down, and follow
specified procedures when performing these operations. Failure
to do so can result in death or serious injury.
When pressurized air and/or pressurized water is used for cleaning,
wear protective clothing, protective shoes, and eye protection. Eye
protection includes goggles or a protective face shield.
Pressure can be trapped in a hydraulic system and must be
relieved before maintenance is started.
Releasing trapped pressure can cause sudden machine
movement or attachment movement. Use caution if you
disconnect hydraulic lines or fittings.
High-pressure oil that is released can cause a hose to whip or oil
to spray. Fluid penetration can result in death or serious injury. If
fluid enters skin or eyes, get immediate medical attention from a
physician familiar with this injury.
Obey all local laws and regulations for disposal of liquids.
To prevent hot coolant from spraying out, stop engine and wait for
coolant to cool. Using gloves, slowly loosen cap to relieve pressure.
FG018457
Figure 1
10. SP002324
Page 5
Cabin
SAFETY INSTRUCTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
WARNING
AVOID DEATH OR SERIOUS INJURY
Instructions are necessary before operating or servicing
machine. Read and understand the Operation and
Maintenance Manual and signs (decals) on machine. Follow
warnings and instructions in the manuals when making
repairs, adjustments or servicing. Check for correct
function after adjustments repairs or service. Untrained
operators and failure to follow instructions can cause death
or serious injury.
MODEL SERIAL NUMBER RANGE
DX140LC-3 1001 and Up, 50001 and Up
DX180LC-3 1001 and Up, 50001 and Up
DX225LC-3 1001 and Up, 50001 and Up
DX255LC-3 1001 and Up, 50001 and Up
DX300LC-3 1001 and Up, 50001 and Up
DX340LC-3 1001 and Up, 10001 and Up
DX350LC-3 1001 and Up, 10001 and Up
DX380LC-3 10001 and Up
DX420LC-3 10001 and Up
DX490LC-3 10001 and Up
DX530LC-3 10001 and Up
11. SP002324Cabin
Page 6
CABIN IDENTIFICATION
Rollover Protective Structure (ROPS)
General ROPS Instructions for ROPS Certified Cabins
The operator's cabin is a ROPS certified structure for protecting
the seat-belted operator. It absorbs the impact energy of a
rollover impact. Do not allow machine weight (mass) to exceed
certified value on certification plate. If weight is exceeded, the
ROPS structure will not be able to fulfill its safety function.
Do not increase machine weight beyond certified value by
modifying machine or by installing attachments on machine. If
weight limit of protective equipment is exceeded, protective
equipment will not be able to protect operator, and operator may
suffer death or serious injury. Always observe the following:
• This machine is equipped with a protective structure. Do
not remove protective structure and perform operations
without it.
• Never modify the operator's cabin by welding, grinding,
drilling holes or adding attachments unless instructed by
DOOSAN. Changes to the cabin can cause loss of
operator protection from rollover and falling objects, and
operator may suffer death or serious injury.
• When protective structure is damaged or deformed by
falling objects or by rolling over, its strength will be reduced
and it will not be able to properly fulfill its function. In these
cases, always contact your DOOSAN distributor for advice.
Never repair a ROPS cabin.
• Always wear your seat belt when operating machine.
12. SP002324
Page 7
Cabin
ROPS Certification
This DOOSAN excavator has an operator's cabin that meets
ROPS requirements. The seat belt must be worn for rollover
protection.
The ROPS certification plate is found on the left side of the cabin
on most models. It may vary slightly in its location on some
models.
Check the ROPS cabin, mounting, and hardware for damage.
Never modify the ROPS cabin. Replace the cabin and hardware
if damaged. See your DOOSAN dealer for parts.
ROPS − Rollover Protective Structure complies with ISO
12117-2:2008.
WARNING
AVOID DEATH OR SERIOUS INJURY
Never modify the operator cabin by welding, grinding,
drilling holes or adding attachments unless instructed in
writing by DOOSAN. Changes to the cabin can cause loss
of operator protection from rollover and falling objects, and
can result in death or serious injury.
13. SP002324Cabin
Page 8
REMOVAL
1. Park on firm and level ground.
2. Lower bucket or work tool to ground.
3. Stop engine.
4. Move safety lever to "RELEASED" (UNLOCK) position.
5. Turn starter switch to "I" (ON) position.
6. To relieve pressure from accumulators, fully stroke work
levers in all directions. Movement can occur.
7. Move safety lever to "LOCK" position.
8. Turn key to "O" (OFF) position and remove from starter
switch.
9. Install maintenance warning tag on controls.
10. Disconnect the battery cable from the negative (-) battery
terminal.
11. Prepare cabin shell for removal by disconnecting wiring
connectors for:
A. Cabin interior lighting.
B. External light wiring.
C. Radio antenna and connections.
D. Wiper/washer connections.
NOTE: Control console wiring harnesses and hydraulic
piping lines that pass through the floor of the
cabin do not need to be disassembled.
NOTE: If cabin is equipped with additional protective
guards over cabin openings, they must be
removed.
FG018470
DO NOT OPERATE
when performing inspection
WARNING
190-00695A
or maintenance
ON OFF
O I
Figure 1
WARNING
AVOID DEATH OR SERIOUS INJURY
If engine must be running while performing
maintenance, use extreme care. Always have one
person in the cabin at all times. Never leave the cabin
with the engine running.
14. SP002324
Page 9
Cabin
12. Remove mats from steps and floor.
13. Remove safety lever cover (1, Figure 2).
14. Remove two screws (2, Figure 2) in safety lever to remove
lever.
15. Remove duct covers (1 and 2, Figure 3).
16. Remove air ducts (3 thru 8, Figure 4) on right-hand side of
operator's cabin.
17. Disconnect monitor and sun sensor connectors.
18. Disconnect washer hose from floor plate.
19. Remove glove box pad (1, Figure 5), and two bolts under
pad.
20. Remove three caps (2, Figure 5) from top of rear cover.
Remove three bolts securing rear cover in place.
21. Remove two bolts (3, Figure 5) from bottom of rubber
mounts in rear cover.
22. Remove rear cover.
FG018676
1
2
Figure 2
11
FG018677
22
Figure 3
3
4
5
6
7 8
FG015886
Figure 4
1
2
3
FG015887
Figure 5
15. SP002324Cabin
Page 10
23. Remove air ducts (4 thru 6, Figure 6). Remove
atmospheric air duct (7).
24. Remove all bolts fastening brackets (8 thru 10, Figure 7) to
separate brackets from body of operator's cabin.
25. Disconnect connectors on interior lights, speakers and
antenna.
26. Remove four mounting nuts from four corners of cabin floor
(2, Figure 8).
27. Remove four bolts (3, Figure 8) from door side of cabin
floor.
28. Remove four bolts (1, Figure 8) on right-hand side of floor
in operator's cabin.
29. Remove two bolts (4, Figure 8) at front of floor in operator's
cabin, and bolt (5, Figure 8) at rear of floor in operator's
cabin.
4 5
7
6
FG015888
Figure 6
8
9
10
FG015889
Figure 7
3 3
4
2
1 1
5
FG015890
Figure 8Quantity Description
4 16 mm nuts at each corner of cabin.
4 12 mm x 1.75 bolts at door side of cabin.
7
12 mm x 1.75 bolts, 4 on right side of cabin
and 2 under front window. One bolt is
positioned in center of rear part of
operator's cabin.
16. SP002324
Page 11
Cabin
30. Remove bolt which is attaching the plate to prevent
loosening of ROPS bolt (1, Figure 9).
31. Remove ROPS bolt (2, Figure 10).
32. Using a suitable lifting device, attach slings to four (4) lift
points on top of cabin (Figure 11, Figure 12).
NOTE: Cabin weighs approximately 485 kg (1,069 lb)
33. Lift cabin approximately 25 - 50 mm (1" - 2") above deck.
Check that all electrical connections have been
disconnected and all other items unbolted.
34. Continue lifting with crane to remove cabin shell. Lower
shell and rest on support.
NOTE: Lift operator's cabin slowly to prevent damaging
controls covers and other components.
FG018678
1
Figure 9
2 FG021955
Figure 10
FG015892
Figure 11
FG021964
Figure 12
17. SP002324Cabin
Page 12
INSTALLATION
1. Using a suitable lifting device, attach slings to four (4) lift
points on top of cabin (Figure 13, Figure 14).
NOTE: Cabin weighs approximately 485 kg (1,069 lb).
2. Lower cabin into position on cabin floor.
3. Install four mounting nuts in four corners of cabin floor (2,
Figure 15).
NOTE: Mounting nut torque 21 kg•m (205 Nm,
150 ft lb).
4. Install four bolts (3, Figure 15) in door side of cabin floor.
5. Install four bolts (1, Figure 15) on right of floor in operator's
cabin.
6. Install two bolts (4, Figure 15) on front of floor in operator's
cabin, and one bolt (5) on rear of floor in operator's cabin.
7. Once cabin is mounted to floor, unhook lifting device.
8. Connect cabin ground cable.
9. Connect cabin light wiring connector.
10. Install stereo assembly with bolts (2, Figure 15) after
connecting speaker and antenna wires.
FG015892
Figure 13
FG021964
Figure 14
3 3
4
2
1 1
5
FG015890
Figure 15Quantity Description
4 16 mm nuts at each corner of cabin.
4 12 mm x 1.75 bolts at door side of cabin.
7
12 mm x 1.75 bolts, 4 on right side of cabin
and 2 under front window. One bolt is
positioned in center of rear part of
operator's cabin.
18. SP002324
Page 13
Cabin
11. Install the bolt which is attaching the plate to prevent
loosening of ROPS bolt (1, Figure 16).
12. Install ROPS bolt (2, Figure 17).
NOTE: Mounting nut torque 13 kg•m (94 ft lb)
13. Install air ducts (1 thru 5, Figure 18). Install atmospheric air
duct (6).
14. Install brackets (7 thru 9, Figure 19) on body of operator's
cabin.
Figure 16
FG018678
1
2 FG021955
Figure 17
1
3
4
6
5
2
FG015893
Figure 18
7
8
9
FG015895
Figure 19
19. SP002324Cabin
Page 14
15. Install two bolts (2, Figure 20) and center bolts in center,
and three bolts on top to install dashboard cover. Install
cap (3, Figure 20) on top of dashboard cover.
16. Install glove box pad (1, Figure 20).
17. Connect washer hose at floor plate bottom.
18. Install air ducts (1 thru 4, Figure 21) on right-hand side of
cabin.
19. Connect monitor, sun sensor connector, and washer hose.
20. Install duct covers (1 and 2, Figure 22).
21. Install safety lever. Apply Loctite on screws when installing
lever.
22. Install mats on steps and floor.
23. Connect negative (-) battery cable leading to frame from
battery.
FG015896
1
3
2
Figure 20
FG015897
3
4
5
6
Figure 21
11
FG018677
22
Figure 22
20. SP002522Counterweight
Page 6
GENERAL
Warning for Counterweight and Front
Attachment Removal
Before any attempt is made to begin removal or installation of
the counterweight, the excavator must be parked on a firm and
level supporting surface, with no sloping surfaces or soft or
muddy ground in the area where the assist lift crane will be
working. Position all accessories in the overnight storage
position.
FG018594
Figure 1
WARNING
AVOID DEATH OR SERIOUS INJURY
Removal of the counterweight from the machine, front
attachment (boom and arm) or any other part, can affect the
stability of the machine. This could cause tipping or
rollover, resulting in death or serious injuries.
Never remove counterweight or front attachment unless the
upper structure is in-line with the lower structure.
Never rotate the upper structure once the counterweight or
front attachment has been removed.
WARNING
AVOID DEATH OR SERIOUS INJURY
The weight of counterweight is given in the following table.
Use only rated and approved slings and hardware when
removal or installation lifts are being made. Lifting slings,
shackles and all other hardware must be rigged safely. An
assist crane that is rated above weight capacity is required.
Model Weight of Counterweight
DX180C-3
3,000 kg (6,614 lb)
3,300 kg (7,275 lb)
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. SP002522
Page 7
Counterweight
Responsibility must be assigned to one person to be in charge
of the lifting crew, and to verify that required safe lifting
precautions have been taken before each part of this procedure
has been started.
All members of the working crew should know and understand
the signals that will be used between the lifting leader, the assist
crane operator and the remainder of the work crew.
To maintain stability the counterweight must be removed only
when the front attachment is taken off the machine.
When loading an excavator (either track or wheeled type) on a
trailer for transport after the front attachment has been removed,
always go backwards up the loading ramp with the
counterweight uphill (Figure 3).
WARNING
AVOID DEATH OR SERIOUS INJURY
If the upper structure deck has been unbalanced by
removal of weight from one end only, traveling with the
excavator, swinging the upper structure, movement over
bumps or sloping and uneven surfaces could cause loss of
control resulting in tipping or rollover.
Figure 2
FG01861815
90 ~ 110
FG021965
15
Figure 3
23. SP002522Counterweight
Page 8
REMOVAL
1. Park on firm, level ground.
2. Lower work tool or bucket to ground.
3. Stop engine.
4. Move safety lever to "UNLOCK" position.
5. Turn starter switch to "I" (ON) position.
6. Fully stroke work levers (joysticks) in all directions to
relieve any pressure from accumulators.
7. Move safety lever to "LOCK" position.
8. Turn key to "O" (OFF) position and remove from starter switch.
9. Attach maintenance warning tag on controls.
10. Turn battery disconnect switch to "OFF" position.
11. Make sure all electrical and other items are disconnected.
12. Using a suitable lifting device capable of handling a heavy
load, partially support counterweight (1, Figure 5) before
loosening four bolts (2, Figure 5). Stop lifting with assist
crane as soon as lifting slings are taut.
13. Remove four bolts (2, Figure 5) and washers (3) from
counterweight (1).
NOTE: Heat bolts, if necessary, to free them.
14. When bolts (2, Figure 5) and washers (3) have been
removed, lift counterweight (1) a very short distance above
support frame (4) and stop. Check slings and make sure
counterweight is being supported evenly.
FG018470
DO NOT OPERATE
when performing inspection
WARNING
190-00695A
or maintenance
ON OFF
O I
Figure 4
WARNING
AVOID DEATH OR SERIOUS INJURY
Death or serious injury can occur from a counterweight
falling during removal or installation. Do not allow
personnel under or around the counterweight during
removal or installation.
Use certified cables and shackles of adequate load rating.
Improper lifting can allow the load to shift and cause death
or serious injury.
WARNING
AVOID DEATH OR SERIOUS INJURY
If engine must be running while performing
maintenance, use extreme care. Always have one
person in the cabin at all times. Never leave the cabin
with the engine running.
FG021052
3
2
4
1 5
Figure 5
24. SP002522
Page 9
Counterweight
INSTALLATION
1. Using suitable lifting device capable of handling the weight
of the counterweight. Raise counterweight (1, Figure 6)
into position just above support frame (4) leaving
counterweight suspended. Verify that counterweight is
level and even.
NOTE: Leave counterweight (1, Figure 6) suspended
3 mm (0.125") above support frame (4) until all
four mounting bolts (2) are started in
counterweight mounting holes.
2. Slide washers (3, Figure 6) onto bolts (2). Apply Loctite
#242 to mounting bolt threads.
3. Install four bolts (2, Figure 6) with washers (3) into
counterweight until washers contact support frame. Fully
lower counterweight onto support frame and finish
tightening bolts.
NOTE: Torque bolts (2, Figure 6) to values shown in
the following table.
4. Remove lifting device from counterweight lifting holes (5,
Figure 6)
5. Make sure all electrical and other items are connected.
6. Turn battery disconnect switch to "ON" position.
Figure 6
FG021052
3
2
4
1 5
Model Bolt Torque
DX180LC-3 150 kg•m (1,085 ft lb)