The document provides instructions for identifying JCB rough terrain forklifts through identification plates listing the machine and serial numbers, describes the manual's section numbering and terminology, and lists standard torque settings and service tools needed for maintenance.
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
Takeuchi tl250 track loader parts catalogue manual (serial no. 225000001 and up)jjksekfksmem
This document provides parts lists and diagrams for components of a TL250 excavator with serial numbers 225000001-225999999. It includes sections for track rollers, idlers, adjusters, travel motors, belts, frames, and arm stoppers. Each section lists the relevant parts with descriptions and part numbers. Diagrams illustrate the components and their positions. The document is intended to aid maintenance and repair of this excavator model.
Takeuchi tl250 track loader operator manual serial no. 225000665 and upjjksekfksmem
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing protective equipment, being aware of fire hazards, maintaining safety equipment, and following proper procedures for starting, operating, and transporting the machine.
3) The document details what to do in the event of a fire, such as contacting emergency services, only fighting small contained fires if trained to do so, and using a fire extinguisher according to instructions.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing emergency equipment, securing the work area and stopping the engine before maintenance.
Takeuchi tl240 track loader parts catalogue manual (serial no. 224000001 and up)jjksekfksmem
This document provides parts information for a track loader. It includes exploded diagrams and lists of parts for components such as the track rollers, idlers, travel motor, frame, and operation levers. The parts are identified by number, description, and quantity. Specifications like part numbers, serial numbers, and service/remarks are provided for each item. The document appears to be from a maintenance manual or parts catalog for a track loader, to assist with repairs and ordering replacement components.
Takeuchi tl240 track loader operator manual serial no. 224000570 and upjjksekfksmem
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating procedures, preventing fire hazards, and what to do in the event of a fire emergency. Proper maintenance is emphasized to prevent combustible debris buildup that could ignite. Emergency procedures are outlined for responding to a machine fire.
This document provides safety information and guidelines for servicing a machine. It outlines various precautions including wearing protective equipment, using the correct tools, stopping the engine before maintenance, and securing components. Symbols used in the manual are also defined. The structure of the manual is given which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
New holland 9080 n high grape harvester service repair manual [780060001 ]jjksekfksmem
This document is a service manual for the 9080N Grape Harvester. It provides information on servicing and repairing components of the harvester including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning systems, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. Repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools when possible.
New holland 9080 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 607700 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 926 rough terrain fork lift service repair manual serial no. 602000 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 50001 ...jjksekfksmem
The document provides safety instructions for maintenance of track excavators. It lists applicable models, describes different signal words used in safety messages to indicate the seriousness of hazards, and the location and purpose of safety decals. It stresses the operator's responsibility for safe operation, following all safety rules and instructions when operating or servicing the machine. It highlights the importance of using recommended work tools and attachments, and not exceeding maximum operating weights.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 a...jjksekfksmem
The document provides instructions for removing the cabin from an excavator. It outlines 28 steps to disconnect wiring, remove covers, ducts and brackets. Key steps include relieving hydraulic pressure, removing the safety lever, disconnecting the battery, and removing bolts and nuts securing the cabin floor and mounts. Safety warnings are provided to never modify the ROPS cabin and always wear a seatbelt for rollover protection.
Daewoo doosan dx170 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1) This document provides safety guidelines and precautions for operating Doosan wheel excavators.
2) Safety labels are located on the machine to highlight key hazards, and operating procedures must follow safety summaries to prevent injury.
3) Unauthorized modifications to the machine are prohibited, and general hazards include being struck by moving parts, electrocution, and tipping hazards.
Daewoo doosan dx160 w excavator service repair manual (serial number 5001 and...jjksekfksmem
The document provides instructions for reassembling the swing reduction gear of a Doosan wheel excavator. It describes disassembling and cleaning the various parts, and reassembling components such as the carrier subassemblies, main assembly, and motor. Safety precautions are provided, noting that tools and equipment must be in good working order and lifting equipment used must be capable of safely handling loads. Personnel are responsible for their own safety by following the recommended procedures.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualjjksekfksmem
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan dx140 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1. The document provides safety information and guidelines for operating a Doosan wheel excavator. It outlines general safety essentials, locations of safety labels, lifting precautions, prohibited modifications, and hazard information.
2. Sections are included that describe safety procedures for starting the engine, machine operation, maintenance, working with batteries, towing, shipping, and lifting with a sling.
3. Operators and maintenance personnel are warned to read the safety manual thoroughly to learn safe operating and maintenance practices, in order to prevent accidents and injuries.
Daewoo doosan dx140 lc 5 excavator service repair manual (serial number 1001 ...jjksekfksmem
The document provides information about an excavator engine, including:
1) It describes the basic components of the cylinder block, including that it is made of cast iron and has five main bearings to support the crankshaft.
2) It lists and describes the main parts that make up the cylinder head, including the cylinder head itself, valves, valve guides, and valve springs.
3) It provides an exploded parts view diagram of the cylinder head with reference numbers and descriptions of each part.
1. The document provides instructions for removing, disassembling, assembling, and installing a counterbalance valve on a 320D2L excavator.
2. Key steps include releasing hydraulic pressure, removing hoses and bolts to access the valve, disassembling internal components like springs and sleeves, cleaning parts, lubricating seals, and reversing steps to reassemble and reinstall the valve.
3. Proper torque specifications and cleanliness procedures are listed to prevent contamination of hydraulic systems.
The document provides instructions for removing and installing a flywheel, crankshaft rear seal, flywheel housing, and vibration damper and pulley on a Caterpillar 320D2L excavator engine. Key steps include using guide studs and lifting devices to position parts, inspecting and replacing seals if needed, cleaning surfaces, and tightening bolts to specified torques. Tools and replacement parts are also listed.
The document provides the procedure for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Locking the crankshaft and camshaft using specific tools to ensure proper timing.
2. Removing the fuel injection pump bolts and carefully removing the pump.
3. Installing a new O-ring seal on the pump and installing the pump, ensuring proper timing is maintained.
1) The document provides instructions for disassembling and assembling the final drive of a 320D2 excavator.
2) It describes removing over 30 individual parts including gears, shafts, seals, and housings.
3) Reassembly involves installing new seals and O-rings, pressing bearings into place, measuring shim thickness, and reinstalling the various gears and shafts in reverse order of disassembly. Proper cleaning and lubrication of parts is emphasized.
The document provides instructions for removing and installing inlet and exhaust valve springs on a 320D2 excavator engine. Key steps include:
1. Using a valve spring compressor tool to compress the valve spring and remove the valve keepers and spring retainer.
2. Marking the valves and springs to identify the correct position for installation.
3. Removing the valve spring, retainer, and potentially the stem seal from each valve one at a time.
4. Inspecting parts and installing new stem seals if needed before reversing the process to install the springs on all valves.
1. The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C7.1 engine.
2. Key steps include locking the crankshaft and camshaft positions, removing the idler gear assembly, and ensuring proper alignment of timing marks when installing the new idler gear.
3. Special tools are required to lock the crankshaft and camshaft positions, and precise alignment of timing marks between gears is necessary to maintain correct engine timing.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
New holland 9070 n grape harvester service repair manualjjksekfksmem
This document is a service manual for the 9070N and 9080N grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, attachments and headers, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, platform, cab, bodywork and decals. The introduction section emphasizes safety and contains definitions for danger, warning and caution signals related to potential personal injury.
New holland 9070 ll grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing engines, hydraulic systems, electrical systems, and other components for a line of grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and the platform, cab, bodywork and decals. It provides removal and installation instructions, specifications, and troubleshooting information to repair and maintain the harvesters.
New holland 9070 l high grape harvester service repair manualjjksekfksmem
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 940 rough terrain fork lift service repair manual serial no. 660001 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 1280000 onwardsjjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 930 rough terrain fork lift service repair manual serial no. 607700 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 926 rough terrain fork lift service repair manual serial no. 602000 to 82...jjksekfksmem
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 50001 ...jjksekfksmem
The document provides safety instructions for maintenance of track excavators. It lists applicable models, describes different signal words used in safety messages to indicate the seriousness of hazards, and the location and purpose of safety decals. It stresses the operator's responsibility for safe operation, following all safety rules and instructions when operating or servicing the machine. It highlights the importance of using recommended work tools and attachments, and not exceeding maximum operating weights.
Daewoo doosan dx180 lc 3 excavator service repair manual serial number 1001 a...jjksekfksmem
The document provides instructions for removing the cabin from an excavator. It outlines 28 steps to disconnect wiring, remove covers, ducts and brackets. Key steps include relieving hydraulic pressure, removing the safety lever, disconnecting the battery, and removing bolts and nuts securing the cabin floor and mounts. Safety warnings are provided to never modify the ROPS cabin and always wear a seatbelt for rollover protection.
Daewoo doosan dx170 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1) This document provides safety guidelines and precautions for operating Doosan wheel excavators.
2) Safety labels are located on the machine to highlight key hazards, and operating procedures must follow safety summaries to prevent injury.
3) Unauthorized modifications to the machine are prohibited, and general hazards include being struck by moving parts, electrocution, and tipping hazards.
Daewoo doosan dx160 w excavator service repair manual (serial number 5001 and...jjksekfksmem
The document provides instructions for reassembling the swing reduction gear of a Doosan wheel excavator. It describes disassembling and cleaning the various parts, and reassembling components such as the carrier subassemblies, main assembly, and motor. Safety precautions are provided, noting that tools and equipment must be in good working order and lifting equipment used must be capable of safely handling loads. Personnel are responsible for their own safety by following the recommended procedures.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualjjksekfksmem
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan dx140 w excavator service repair manual (serial number 5001 and...jjksekfksmem
1. The document provides safety information and guidelines for operating a Doosan wheel excavator. It outlines general safety essentials, locations of safety labels, lifting precautions, prohibited modifications, and hazard information.
2. Sections are included that describe safety procedures for starting the engine, machine operation, maintenance, working with batteries, towing, shipping, and lifting with a sling.
3. Operators and maintenance personnel are warned to read the safety manual thoroughly to learn safe operating and maintenance practices, in order to prevent accidents and injuries.
Daewoo doosan dx140 lc 5 excavator service repair manual (serial number 1001 ...jjksekfksmem
The document provides information about an excavator engine, including:
1) It describes the basic components of the cylinder block, including that it is made of cast iron and has five main bearings to support the crankshaft.
2) It lists and describes the main parts that make up the cylinder head, including the cylinder head itself, valves, valve guides, and valve springs.
3) It provides an exploded parts view diagram of the cylinder head with reference numbers and descriptions of each part.
1. The document provides instructions for removing, disassembling, assembling, and installing a counterbalance valve on a 320D2L excavator.
2. Key steps include releasing hydraulic pressure, removing hoses and bolts to access the valve, disassembling internal components like springs and sleeves, cleaning parts, lubricating seals, and reversing steps to reassemble and reinstall the valve.
3. Proper torque specifications and cleanliness procedures are listed to prevent contamination of hydraulic systems.
The document provides instructions for removing and installing a flywheel, crankshaft rear seal, flywheel housing, and vibration damper and pulley on a Caterpillar 320D2L excavator engine. Key steps include using guide studs and lifting devices to position parts, inspecting and replacing seals if needed, cleaning surfaces, and tightening bolts to specified torques. Tools and replacement parts are also listed.
The document provides the procedure for removing and installing a fuel injection pump on a 320D2 excavator. Key steps include:
1. Locking the crankshaft and camshaft using specific tools to ensure proper timing.
2. Removing the fuel injection pump bolts and carefully removing the pump.
3. Installing a new O-ring seal on the pump and installing the pump, ensuring proper timing is maintained.
1) The document provides instructions for disassembling and assembling the final drive of a 320D2 excavator.
2) It describes removing over 30 individual parts including gears, shafts, seals, and housings.
3) Reassembly involves installing new seals and O-rings, pressing bearings into place, measuring shim thickness, and reinstalling the various gears and shafts in reverse order of disassembly. Proper cleaning and lubrication of parts is emphasized.
The document provides instructions for removing and installing inlet and exhaust valve springs on a 320D2 excavator engine. Key steps include:
1. Using a valve spring compressor tool to compress the valve spring and remove the valve keepers and spring retainer.
2. Marking the valves and springs to identify the correct position for installation.
3. Removing the valve spring, retainer, and potentially the stem seal from each valve one at a time.
4. Inspecting parts and installing new stem seals if needed before reversing the process to install the springs on all valves.
1. The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C7.1 engine.
2. Key steps include locking the crankshaft and camshaft positions, removing the idler gear assembly, and ensuring proper alignment of timing marks when installing the new idler gear.
3. Special tools are required to lock the crankshaft and camshaft positions, and precise alignment of timing marks between gears is necessary to maintain correct engine timing.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
3. Page No.Contents
Section 1 - General Information
1 - i 1 - i
Introduction
About This Manual ....................................................................................1 - 1
Machine Model and Serial Number .....................................................1 - 1
Using the Service Manual ...................................................................1 - 1
Section Numbering ..............................................................................1 - 1
Left Side, Right Side ............................................................................1 - 2
Cross References ................................................................................1 - 2
Identifying Your Machine ..........................................................................1 - 3
Machine Identification Plate ................................................................1 - 3
Component Identification Plates ..........................................................1 - 5
ROPS/FOPS Certification Plate ..........................................................1 - 7
Standard Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners ......................................1 - 9
Introduction ..........................................................................................1 - 9
Bolts and Screws .................................................................................1 - 9
Hydraulic Connections ............................................................................1 - 13
'O' Ring Face Seal System ................................................................1 - 13
'Torque Stop' Hose System ...............................................................1 - 16
Service Tools
Numerical List .........................................................................................1 - 17
Tool Detail Reference .............................................................................1 - 20
Section B - Frame and Bodywork ......................................................1 - 20
Section C - Electrics ..........................................................................1 - 24
Section E - Hydraulics .......................................................................1 - 25
Section F - Transmission ...................................................................1 - 30
Section H - Steering ..........................................................................1 - 33
Section K - Engine .............................................................................1 - 34
Service Consumables
Sealing and Retaining Compounds ........................................................1 - 35
Terms and Definitions
Schematic Codes ...................................................................................1 - 37
Hydraulic Schematic Colour Codes ...................................................1 - 37
4. Section 1 - General Information
Introduction
About This Manual
1-1 1-19803/5100-18
Introduction
About This Manual
Machine Model and Serial Number
This manual provides information for the following
model(s) in the JCB machine range:
– 926 from Machine Serial No. 602000 to 825483
– 930 from Machine Serial No. 607700 to 825399
– 940 from Machine Serial No. 660001 to 825399
– 926 from Machine Serial No. 1280000 onwards
– 930 from Machine Serial No. 1280000 onwards
– 940 from Machine Serial No. 1280000 onwards
– 950 from Machine Serial No. 1483230 onwards
Using the Service Manual
T11-004
This publication is designed for the benefit of JCB
Distributor Service Engineers who are receiving, or have
received, training by JCB Technical Training Department.
These personnel should have a sound knowledge of
workshop practice, safety procedures, and general
techniques associated with the maintenance and repair of
hydraulic earthmoving equipment.
The illustrations in this publication are for guidance only.
Where the machines differ, the text and/or the illustration
will specify.
General warnings in Section 2 are repeated throughout the
manual, as well as specific warnings. Read all safety
statements regularly, so you do not forget them.
Renewal of oil seals, gaskets, etc., and any component
showing obvious signs of wear or damage is expected as
a matter of course. It is expected that components will be
cleaned and lubricated where appropriate, and that any
opened hose or pipe connections will be blanked to
prevent excessive loss of hydraulic fluid and ingress of dirt.
Where a torque setting is given as a single figure it may be
varied by plus or minus 3%. Torque figures indicated are
for dry threads, hence for lubricated threads may be
reduced by one third.
The manufacturer's policy is one of continuous
improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will
be accepted for discrepancies which may occur between
specifications of the machine and the descriptions
contained in this publication.
Finally, please remember above all else safety must come
first!
Section Numbering
T11-005
The manual is compiled in sections, the first three are
numbered and contain information as follows:
The remaining sections are alphabetically coded and deal
with Dismantling, Overhaul etc. of specific components, for
example:
Section contents, technical data, circuit descriptions,
operation descriptions etc. are inserted at the beginning of
each alphabetically coded section.
1 General Information - includes torque settings and
service tools.
2 Care and Safety - includes warnings and cautions
pertinent to aspects of workshop procedures etc.
3 Maintenance - includes service schedules and
recommended lubricants for all the machine.
A Attachments
B Body and Framework, etc.
5. Section 1 - General Information
Introduction
About This Manual
1-2 1-29803/5100-18
Left Side, Right Side
In this manual, 'left' A and 'right' B mean your left and right
when you are seated correctly in the machine.
Fig 1.
Cross References
T1-004_2
In this publication, page cross references are made by
presenting the subject title printed in bold, italic and
underlined. It is preceeded by the 'go to' symbol. The
number of the page upon which the subject begins, is
indicated within the brackets. For example: K Cross
References ( T 1-2).
6. Section 1 - General Information
Introduction
Identifying Your Machine
1-3 1-39803/5100-18
Identifying Your Machine
Machine Identification Plate
Your machine has an identification plate mounted as
shown. K Fig 2. ( T 1-3). The serial numbers of the
machine and its major units are stamped on the plate.
The serial number of each major unit is also stamped on
the unit itself. If a major unit is replaced by a new one, the
serial number on the identification plate will be wrong.
Either stamp the new number of the unit on the
identification plate, or simply stamp out the old number.
This will prevent the wrong unit number being quoted when
replacement parts are ordered.
The machine and engine serial numbers can help identify
exactly the type of equipment you have.
Fig 2.
Typical Vehicle Identification Number (VIN)
1 World Manufacturer Identification (3 Digits)
SLP = JCB
2 Machine Model (3 Digits)
3 Drive Type
4 Year of Manufacture
5 Manufacturer Location (1 Digit)
E = England
6 Machine Serial Number (7 Digits)
Each machine has a unique serial number.
SLP 930 04 6 E 0123456
1 2 3 4 5 6
02 = 2 Wheel Drive
04 = 4 Wheel Drive
5 = 2005 7 = 2007
6 = 2006 8 = 2008
7. Section 1 - General Information
Introduction
Identifying Your Machine
1-4 1-49803/5100-18
Typical Product Identification Number (PIN) -
Early Machines
1 World Manufacturer Identification (3 Digits)
2 Machine Model (3 Digits)
3 Mast Type (2 Digits)
4 Check letter (1 Digit)
The Check Letter is used to verify the authenticity of
the machine’s PIN.
5 Machine Serial Number (8 Digits)
Each machine has a unique serial number.
Typical Product Identification Number (PIN) -
Later Machines
1 World Manufacturer Identification (3 Digits)
2 Machine Model (3 Digits)
3 Wheel Drive Option (2 Digits)
4 Check letter (1 Digit)
The Check Letter is used to verify the authenticity of
the machine’s PIN.
5 Machine Serial Number (8 Digits)
Each machine has a unique serial number.
JCB 930 36 C 01234567
1 2 3 4 5
926, 930, 940 or 950
36 = 3.6 metre mast
45 = 4.5 metre mast
55 = 5.5 metre mast
65 = 6.5 metre mast
NM = No Mast fitted
JCB 930 02 C 01234567
1 2 3 4 5
926, 930, 940 or 950
02 = 2 Wheel Drive
04 = 4 Wheel Drive
8. Section 1 - General Information
Introduction
Identifying Your Machine
1-5 1-59803/5100-18
Component Identification Plates
Typical Engine Identification Number
T1-005_3
Engine data labels A are located on the cylinder block at
position C and rocker cover D (if fitted). K Fig 3. ( T 1-5).
The data label contains important engine information and
includes the engine identification number E.
A typical engine identification number is explained as
follows:
1 Engine Type
S = 4.4 litre series.
2 Engine part number
3 Country of manufacture
U = United Kingdom
4 Engine Serial Number
5 Year of Manufacture
The last three parts of the engine identification number are
stamped on the cylinder block at position B.
C007820-C2
Fig 3. Engine
SA 320/40001 U 00001 04
1 2 3 4 5
JCB Dieselmax (Tier 2)
A = Naturally aspirated
B = Turbocharged
C = Turbocharged and intercooled
JCB Dieselmax (Tier 3)
D = Turbocharged
E = Electronic common rail fuel injection
F = Turbocharged and after-cooled
U 00001 04
BC
D
B
E
9. Section 1 - General Information
Introduction
Identifying Your Machine
1-6 1-69803/5100-18
Transmission Identification Numbers
Axles
The front axle serial number is stamped on a data plate
mounted to the front of the left hand axle arm.
K Fig 4. ( T 1-6).
T047530-3
Fig 4. Front Axle
The rear axle serial number is also stamped on a plate
mounted to the left hand front face of the axle.
K Fig 5. ( T 1-6).
Fig 5. Rear Axle
Gearbox
The gearbox has a serial number stamped on a data plate
Y as shown. K Fig 6. ( T 1-6).
Fig 6. Transmission
10. Section 1 - General Information
Introduction
Identifying Your Machine
1-7 1-79803/5100-18
ROPS/FOPS Certification Plate
823860-2
Fig 7.
Machines built to ROPS/FOPS standards have an
identification label A fitted to the inside of the cab.
K Fig 7. ( T 1-7).
The FOPS structure provides Impact Protection against
falling objects (as defined in ISO 6005:2004).
FOPS Data Plate
!MWARNING
Do not use the machine if the falling objects protection
level provided by the structure is not sufficient for the
application. Falling objects can cause serious injury.
8-2-8-17
If the machine is used in any application where there is a
risk of falling objects then a falling-objects protective
structure (FOPS) must be installed. For further information
contact your JCB Dealer
The falling objects protection structure (FOPS) is fitted with
a dataplate. The dataplate indicates what level protection
the structure provides.
Note: A load baskrest extension can be fitted to minimise
the possibility of the load failing towards the mast when the
mast is in a position of maximum reward tilt. A screen
guard can also be fitted to provide protection from objects
coming from the front, contact your JCB distributor.
A
Definition of terms:
ROPS Roll Over Protection Structure
FOPS Falling Objects Protection Structure
11. Section 1 - General Information
Standard Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners
1-9 1-99803/5100-18
Standard Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners
T11-002
Introduction
Some external fasteners on JCB machines are
manufactured using an improved type of corrosion
resistant finish. This type of finish is called Dacromet and
replaces the original Zinc and Yellow Plating used on
earlier machines.
The two types of fasteners can be readily identified by
colour and part number suffix. K Table 1. Fastener Types
( T 1-9).
Table 1. Fastener Types
Note: As the Dacromet fasteners have a lower torque
setting than the Zinc and Yellow fasteners, the torque
figures used must be relevant to the type of fastener.
Note: A Dacromet bolt should not be used in conjunction
with a Zinc or Yellow plated nut, as this could change the
torque characteristics of the torque setting further. For the
same reason, a Dacromet nut should not be used with a
Zinc or Yellow plated bolt.
Note: All bolts used on JCB machines are high tensile and
must not be replaced by bolts of a lesser tensile
specification.
Note: Dacromet bolts, due to their high corrosion
resistance are used in areas where rust could occur.
Dacromet bolts are only used for external applications.
They are not used in applications such as gearbox or
engine joint seams or internal applications.
Bolts and Screws
Use the following torque setting tables only where no
torque setting is specified in the text.
Note: Dacromet fasteners are lubricated as part of the
plating process, do not lubricate.
Torque settings are given for the following conditions:
Condition 1
– Un-lubricated fasteners
– Zinc fasteners
– Yellow plated fasteners
Condition 2
– Zinc flake (Dacromet) fasteners
– Lubricated zinc and yellow plated fasteners
– Where there is a natural lubrication. For example,
cast iron components
Verbus Ripp Bolts
Fig 1.
Torque settings for these bolts are determined by the
application. Refer to the relevant procedure for the
required settings.
Fastener
Type
Colour Part No. Suffix
Zinc and
Yellow
Golden finish 'Z' (e.g. 1315/3712Z)
Dacromet Mottled silver finish 'D' (e.g. 1315/3712D)
18. Section 1 - General Information
Standard Torque Settings
Hydraulic Connections
1-16 1-169803/5100-18
'Torque Stop' Hose System
Fig 3.
`Torque Stop' Hoses 3-B screwed into adaptors 3-A seal
onto an 'O' ring 3-C which is compressed into a 45° seat
machined in the face of the adaptor port. To prevent the 'O'
ring being damages as a result of over tightening, 'Torque
Stop' Hoses have an additional shoulder 3-D, which acts
as a physical stop.
Note: Minimum dimension 3-E fixed by shoulder 3-D.
Table 12. BSP `Torque Stop' Hose - Torque Settings
BSP Hose Size Hexagon (A/F)
Nm kgf m lbf ftin. mm
1/8 14.0 14.0 1.4 10.0
1/4 19.0 27.0 2.7 20.0
3/8 22.0 40.0 4.1 30.0
1/2 27.0 55.0 5.6 40.0
5/8 30.0 65.0 6.6 48.0
3/4 32.0 95.0 9.7 70.0
1 38.0 120.0 12.2 89.0
1 1/4 50.0 189.0 19.3 140.0
1 1/2 55.0 244.0 24.9 180.0
19. Section 1 - General Information
Service Tools
Numerical List
1-17 1-179803/5100-18
Service Tools
Numerical List
The tools listed in the table are special tools required for
carrying out the procedures described in this manual.
These tools are available from JCB Service.
Some tools are available as kits or sets, the part numbers
for parts within such kits or sets are not listed here. For full
details of all tools, including the content of kits and sets,
refer to Tool Detail Reference, Section 1.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description See Section
- Bearing Adapters - see Tool Detail Reference (Section 1) for content F
- Bonded Washers - see Tool Detail Reference (Section 1) for content E
- Female Cone Blanking Caps - see Tool Detail Reference (Section 1) for content E
- Female Connectors - see Tool Detail Reference (Section 1) for content E
- Gearbox Removal Fixture - see Tool Detail Reference (Section 1) for content F
- Hydraulic Flow Test Equipment - see Tool Detail Reference (Section 1) for content E
- Hydraulic Hand Pump Equipment - see Tool Detail Reference (Section 1) for content E
- Male Adapters - BSP x BSP - see Tool Detail Reference (Section 1) for content E
- Male Adapters - BSP x NPT (USA only) - see Tool Detail Reference (Section 1) for
content
E
- Male Cone Blanking Caps - see Tool Detail Reference (Section 1) for content E
- Pressure Test Points - Adaptors - see Tool Detail Reference (Section 1) for content E
- Pressure Test Points - 'T' Adaptors - see Tool Detail Reference (Section 1) for content E
- 'T' Adaptors - see Tool Detail Reference (Section 1) for content E
- Rivet Nut Tool - see Tool Detail Reference (Section 1) for content B
4104/1310 Hand Cleaner B
892/00039 Spool Clamp E
892/00041 De-glazing Tool K
892/00137 Micro-Bore Hose E
892/00167 Ram Protection Sleeve for 90mm Rod Diameter E
892/00179 Bearing Press F
892/00180 Seal Fitting Tool E
892/00181 Plastic Boss H
892/00223 Hand Pump E
892/00237 Flow Test Adapter complete - see Tool Detail Reference (Section 1) for content F
892/00253 Hydraulic Circuit Pressure Test Kit - see Tool Detail Reference (Section 1) for content E
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Section 1 - General Information
Service Tools
Numerical List
1-18 1-189803/5100-18
892/00254 Hose E
892/00262 Test Point 1/4'' in BSP E
892/00271 Adapter E
892/00272 Adapter E
892/00273 Adapter E
892/00274 Adapter E
892/00275 Adapter E
892/00276 Adapter E
892/00277 Adapter E
892/00278 Gauge 0-40 Bar E
892/00279 Gauge 0-400 Bar E
892/00280 Gauge 0-600 Bar E
892/00284 Digital Tachometer C
892/00285 Hyd. Oil Temperature Probe C
892/00295 End Float Setting Tool F
892/00298 Fluke Meter C
892/00301 Flow Test Adapter F
892/00302 Flow Test Adapter F
892/00304 Flow Test Adapter F
892/00333 Heavy Duty Socket F
892/00334 Ram Seal Fitting Tool E
892/00346 Gauge 0-70 Bar E
892/00347 Connector E
892/00706 Test Probe E
892/00817 Heavy Duty Socket F
892/00818 Heavy Duty Socket F
892/00819 Heavy Duty Socket F
892/00842 Glass Lifter B
892/00843 Folding Stand for Holding Glass B
892/00845 Cartridge Gun B
892/00846 Glass Extractor (Handles) B
892/00847 Nylon Spatula B
892/00848 Wire Starter B
892/00849 Braided Cutting Wire B
892/00916 Clutch Pack Spring Compressor F
892/00918 Spacer Setting Tool Kit - see Tool Detail Reference (Section 1) for content F
892/00921 Torque Converter Alignment Bar F
Part
Number
Description See Section
22. Section 1 - General Information
Service Tools
Numerical List
1-19 1-199803/5100-18
892/00923 Test Block for A.R.V. E
892/01016 Ram Protection Sleeve for 25 mm Rod Diameter E
892/01017 Ram Protection Sleeve for 30 mm Rod Diameter E
892/01018 Ram Protection Sleeve for 40 mm Rod Diameter E
892/01019 Ram Protection Sleeve for 50 mm Rod Diameter E
892/01020 Ram Protection Sleeve for 50 mm Rod Diameter (slew ram) E
892/01021 Ram Protection Sleeve for 60 mm Rod Diameter E
892/01022 Ram Protection Sleeve for 60 mm Rod Diameter (slew ram) E
892/01023 Ram Protection Sleeve for 65 mm Rod Diameter E
892/01024 Ram Protection Sleeve for 70 mm Rod Diameter E
892/01025 Ram Protection Sleeve for 75 mm Rod Diameter E
892/01026 Ram Protection Sleeve for 80 mm Rod Diameter E
892/01027 Piston Seal Assembly Tool E
921/52600 Spacer Kit - see Tool Detail Reference (Section 1) for content F
926/15500 Rubber Spacer Blocks B
992/02800 ARV Extractor E
992/04000 Torque Multiplier F
992/04800 Flange Spanner F
992/7603 Replacer Bearing Cap F
992/09300 Hexagon Spanner 55mm A/F E, H
992/09400 Hexagon Spanner 65mm A/F E, H
992/09500 Hexagon Spanner 75mm A/F E, H
992/09600 Hexagon Spanner 85mm A/F E, H
992/09700 Hexagon Spanner 95mm A/F E, H
992/09900 Hexagon Spanner 115mm A/F E, H
992/10000 Hexagon Spanner 125mm A/F E, H
992/10100 Spool Clamp E
992/12300 12V Mobile Oven B
992/12400 24V Static Oven (2 Cartridge) B
992/12800 Cut-Out Knife B
992/12801 'L' Blades B
993/68100 Slide Hammer Kit - see Tool Detail Reference (Section 1) for content B
993/70111 Breakback Torque Wrench F
Part
Number
Description See Section
23. Section 1 - General Information
Service Tools
Tool Detail Reference
1-20 1-209803/5100-18
Tool Detail Reference
Section B - Frame and Bodywork
Fig 1. 993/68100 Slide Hammer Kit
1 993/68101 Slide Hammer 7 993/68107 Bar - M20 x M20 X 800 mm
2 993/68102 End Stops 8 993/68108 Adaptor - M20 x 7/8" UNF
3 993/68103 Adaptor - M20 x 5/8" UNF 9 993/68109 Adaptor - M20 x M12
4 993/68104 Adaptor - M20 x 1" UNF 10 993/68110 Adaptor - M20 x 5/8" UNF (Shoulder)
5 993/68105 Adaptor - M20 x M20 11 993/68111 Adaptor - M20 x 1/2" UNF
6 993/68106 Adaptor - M20 x M24
Fig 2. Rivet Nut Tool
1 826/01099 M6 x 16 mm Rivet Nut
826/01101 M6 x 19 mm Rivet Nut
826/01102 M8 x 18 mm Rivet Nut
826/01103 M8 x 21 mm Rivet Nut
826/01104 M10 x 23 mm Rivet Nut
826/01105A M10 x 26 mm Rivet Nut
2 - Installation Tool available from: Bollhoff
Fastenings Ltd (www.bollhof.com)