D E S
•Download as RTF, PDF•
0 likes•166 views
This document provides instructions for configuring internet settings on handsets and desktops to access Reliance's GPRS/EDGE network with unlimited data for Rs. 299 per month. The settings include using the APN "rcomwap" and a proxy address and port of 10.239.221.5 and 8080 for both handsets and desktop dial-up connections in order to access the internet through the Reliance network.
Report
Share
Report
Share
![[sachin08080616607.blogspot.com/2010/03/unlimited-reliance-gprsedge-rs299-per.html]
reliance mobile internet setting
HANDSET SETTING:
APN: rcomwap
proxy address: 10.239.221.5
port: 8080
DESKTOP SETTING:
CREATE DIAL UP CONNECTION
APN: rcomwap
INTERNET EXPLORER (WEB BROWSER) CONFIGURATION/SETTING:
INTERNET EXPLORER
TOOLS
INTERNET OPTION
CONNECTION
DIAL UP NETWORK SETTING
SETTING
PROXY SERVER
SELECT (MARK) USE PROXY SERVER FOR THIS CONNECTION
ADDRESS: 10.239.221.5
PORT: 8080](https://image.slidesharecdn.com/desktop-internet-setting-1277156702-phpapp02/85/D-E-S-1-320.jpg)
Recommended
Configure DHCP Server and DHCP-Relay
-Configure DHCP (Create LAN Server and LAN Client) on Windows Server 2008R2
-Configure Relay on SuSE Linux Enterprise Server 11
-Allow Client Use DHCP IP for each LAN
Configure proxy firewall on SuSE Linux Enterprise Server 11
In this practice you will be able:
-How to install and configure the iptables and proxy firewall when we want to block the packet.
-How to allow or deny the services or packet when the client access to the Internet.
Dhcp & dhcp relay agent in cent os 5.3
This document discusses configuring a DHCP server and DHCP relay agent for network infrastructure. It provides instructions on installing and configuring a DHCP server to provide IP addresses, subnet masks, and other network configurations to clients from a specific IP range. It also describes installing and configuring a DHCP relay agent to forward DHCP requests from clients without a local DHCP server to DHCP servers on other subnets. The document gives step-by-step guidance on setting up both the DHCP server and relay agent, and testing that clients receive IP addresses as expected.
Ew7206 apb releasenote
This release note describes firmware updates made to the EW7206APB wireless access point. Version 2.59 from December 2004 fixed issues with MAC filtering overwriting other settings and the inability to connect to a server using PPPoE protocol in STA mode. Earlier versions added features like cloning the MAC address, expanding the DHCP IP range, and fixing ESSID character entry and immediate MAC filtering.
faq streaming server_ver1.2
The document describes how to use the ST7501 streaming server to view live video streams from IP cameras. It provides instructions on getting the streaming URL from the local or remote server and viewing the streams in a media player like QuickTime. It also discusses setting up port forwarding to access streams over the internet and using the streaming server to allow more simultaneous connections than connecting directly to the cameras.
HUAWEI Switch HOW-TO - Configuring link aggregation in static LACP mode
1. Link aggregation bundles physical interfaces into a logical interface to increase bandwidth and provide redundancy. It can be configured in static LACP mode.
2. In static LACP mode, LACP packets are exchanged to determine active and inactive member interfaces of the link aggregation group. Some interfaces will be active for data traffic while others are inactive backups.
3. This document provides instructions on configuring static LACP mode on a Huawei switch: create an Eth-Trunk interface, add GigabitEthernet ports as members, set the LACP priority to determine active/backup interfaces, and verify the configuration. The same configuration is required on the peer switch.
Configuration steps for the cisco 300 series switches v3
This document provides instructions for configuring various features on Cisco SG 300 Series Managed Switches, including connecting to the web management interface using the default IP address, changing the default password, configuring port and VLAN mirroring, creating a VLAN and assigning ports to it, and saving the running configuration.
Huawei ARG3 Router How To - Troubleshooting OSPF: Netmask mismatch
This third lesson about OSPF troubleshooting will be focused on “Netmask mismatch”. We will isolate the problem and we will correct the configuration.
Recommended
Configure DHCP Server and DHCP-Relay
-Configure DHCP (Create LAN Server and LAN Client) on Windows Server 2008R2
-Configure Relay on SuSE Linux Enterprise Server 11
-Allow Client Use DHCP IP for each LAN
Configure proxy firewall on SuSE Linux Enterprise Server 11
In this practice you will be able:
-How to install and configure the iptables and proxy firewall when we want to block the packet.
-How to allow or deny the services or packet when the client access to the Internet.
Dhcp & dhcp relay agent in cent os 5.3
This document discusses configuring a DHCP server and DHCP relay agent for network infrastructure. It provides instructions on installing and configuring a DHCP server to provide IP addresses, subnet masks, and other network configurations to clients from a specific IP range. It also describes installing and configuring a DHCP relay agent to forward DHCP requests from clients without a local DHCP server to DHCP servers on other subnets. The document gives step-by-step guidance on setting up both the DHCP server and relay agent, and testing that clients receive IP addresses as expected.
Ew7206 apb releasenote
This release note describes firmware updates made to the EW7206APB wireless access point. Version 2.59 from December 2004 fixed issues with MAC filtering overwriting other settings and the inability to connect to a server using PPPoE protocol in STA mode. Earlier versions added features like cloning the MAC address, expanding the DHCP IP range, and fixing ESSID character entry and immediate MAC filtering.
faq streaming server_ver1.2
The document describes how to use the ST7501 streaming server to view live video streams from IP cameras. It provides instructions on getting the streaming URL from the local or remote server and viewing the streams in a media player like QuickTime. It also discusses setting up port forwarding to access streams over the internet and using the streaming server to allow more simultaneous connections than connecting directly to the cameras.
HUAWEI Switch HOW-TO - Configuring link aggregation in static LACP mode
1. Link aggregation bundles physical interfaces into a logical interface to increase bandwidth and provide redundancy. It can be configured in static LACP mode.
2. In static LACP mode, LACP packets are exchanged to determine active and inactive member interfaces of the link aggregation group. Some interfaces will be active for data traffic while others are inactive backups.
3. This document provides instructions on configuring static LACP mode on a Huawei switch: create an Eth-Trunk interface, add GigabitEthernet ports as members, set the LACP priority to determine active/backup interfaces, and verify the configuration. The same configuration is required on the peer switch.
Configuration steps for the cisco 300 series switches v3
This document provides instructions for configuring various features on Cisco SG 300 Series Managed Switches, including connecting to the web management interface using the default IP address, changing the default password, configuring port and VLAN mirroring, creating a VLAN and assigning ports to it, and saving the running configuration.
Huawei ARG3 Router How To - Troubleshooting OSPF: Netmask mismatch
This third lesson about OSPF troubleshooting will be focused on “Netmask mismatch”. We will isolate the problem and we will correct the configuration.
Des 3800 howto-en_guest-vlan_20060623
This document provides an example configuration of using a guest VLAN with 802.1x authentication. It describes setting up two VLANs, enabling 802.1x authentication and a guest VLAN on switch ports, and configuring a RADIUS server to assign authenticated devices to a target VLAN. The summary shows that in the guest VLAN state, unauthenticated devices can still access some resources, but after authenticating are assigned to the target VLAN by the RADIUS server and can now access those VLAN's resources.
Aeonmike pf clustering doc guide
This document provides instructions for configuring high availability between two pfSense firewalls using CARP synchronization. The key steps are:
1. Create firewall rules on each firewall to allow communication on the SYNC interface.
2. Configure the backup firewall for CARP synchronization to the SYNC interface only.
3. Configure the primary firewall for CARP synchronization of rules, NAT, and virtual IPs to the backup firewall's SYNC IP.
4. Create virtual IP addresses for the WAN and LAN interfaces that both firewalls will share and take over if the primary fails.
ASA CSC Module
The CSC SSM runs Content Security and Control software on some ASA models to provide protection against viruses, spyware, spam, and other unwanted traffic. It can scan FTP, HTTP/HTTPS, POP3, and SMTP traffic on their standard ports. You must obtain configuration information like the IP addresses and passwords to set up traffic scanning between the ASA and CSC SSM. The document provides steps to create access lists and policy maps to divert specified traffic to the CSC SSM for scanning.
Lacp Agreement
The document describes the Link Aggregation Control Protocol (LACP) agreement process between two devices. LACP allows devices to negotiate the automatic bundling of multiple network links. The process involves 6 steps of exchanging LACP data units (LACPDUs) between the devices. Through the exchange, the devices synchronize state information and verify compatibility to successfully establish a LACP aggregation.
VRRP
This document discusses the Virtual Router Redundancy Protocol (VRRP), which provides gateway redundancy when the primary gateway fails. VRRP uses hello messages and elects a master router based on priority to direct traffic to backup routers and avoid downtime. The configuration assigns IP addresses to interfaces, sets the virtual IP address, and adjusts the priority values for master and backup routers.
TCP Filtering on ASA
The document discusses various TCP inspection policies that can be set on an ASA firewall to control and inspect TCP connections and traffic. These policies include limiting the number of simultaneous and partially opened TCP connections, setting timeout durations for idle, half-closed and embryonic connections, decrementing TTL values, using random sequence numbers, and verifying TCP properties like retransmissions, checksums, ACK flags, and sequence numbers within windows. The policies are implemented using class-maps, policy-maps and applying the policies to interfaces.
How to Configure QinQ?
The QinQ technology is called VLAN dot1q tunnel, 802.1Q tunnel, VLAN Stacking technology. The standard comes from IEEE 802.1ad and it is the expansion of the 802.1Q protocol. QinQ adds one layer of 802.1Q tag (VLAN tag) based on the original 802.1Q packet head. With the double layers of tags, the VLAN quantity is increased to 802.1Q.
How to configure the QinQ? Here we will list two occasions and they can be applied to Huawei switches higher level than Quidway S2700 and with EI version, Huawei S3700 switches and Quidway S5700, etc.
Huawei ARG3 Router How To - Troubleshooting OSPF: Router ID Confusion
This document discusses troubleshooting an OSPF routing protocol configuration issue where routers have an incorrect router ID. It describes checking connectivity and routing tables between routers, which reveal inconsistencies. The root cause is identified as Router A having the wrong router ID of 2.2.2.2 instead of its interface IP 1.1.1.1. The configuration is corrected by changing Router A's router ID, saving the changes, and rebooting Router A. Verification shows routing tables on Router C are now updated correctly.
VPNBee firewall/VPN/load balancer from Gayatri Hitech based on OpenBSD pf
VPNBee is a firewall/UTM appliance based on OpenBSD pf. It employs technologies for ISP load balancing, server load balancing, VPN setup between branch offices, traffic shaping and QoS, IP packet filtering, sniffing, captive portal and so on.
Networking Puzzle
A good puzzle to solve which will clarify your networking concepts. Questions:
1> How and in which sequence Learning, Flooding and Forwarding will happen in Switch?
2> Find MAC and IP on every communication link shown in the figure?
Chapter 07
This chapter discusses router startup processes, configuration management, and troubleshooting connectivity issues. The router boot process involves a power-on self-test, loading the bootstrap, and then loading the Cisco IOS and configuration files. The configuration register controls boot functions. IP addresses can be configured on router interfaces in interface mode and switch interfaces in global mode. Troubleshooting tools include CDP, ping, trace, show commands, and debug commands.
Assigning ip addresses
The document discusses various FortiGate installation and configuration topics. It begins with basic installation and setup, then covers more advanced topics like connecting to dual ISPs, protecting servers, high availability, VLANs, virtual domains, and security enhancements. Specific sections address assigning static IP addresses via DHCP based on a device's MAC address, and ensuring certain devices always get the same IP from the FortiGate DHCP server by adding MAC-IP reservations.
Implementing Internet and MPLS BGP
For enterprise network engineers, implementing BGP can be an intimidating task. This presentation was given to address common architectures for internet and MPLS BGP usage, along with best practices.
Copy and save a configuration file from a router or switch using a laptop
The document provides steps to copy and save the configuration file from a Cisco router or Catalyst switch to a laptop using HyperTerminal. It describes connecting the laptop to the device console port, starting a HyperTerminal session, capturing the configuration output using the "show start" or "show config" command, and saving the output as a text file. It also covers differences between CatOS and Native IOS on Catalyst switches and resetting the terminal length.
Huawei SAN Storage How To - Assigning Management IP Address
In this second Huawei SAN Storage lesson, the topic of the day is “Assigning the Management IP Addresses”, in order to access, configure and diagnose the SAN Storage device, using the ISM (Integrated Storage Management) software.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to access origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
Configure Proxy and Firewall (Iptables)
1. The document provides instructions for configuring iptables firewall rules on a SUSE Linux server to set up a network with internal servers and clients.
2. It outlines steps to allow specific services and access between servers and clients like SSH, DNS, file sharing, remote desktop, and internet access.
3. The configuration includes setting up masquerading and destination NAT rules to enable connectivity and allow internal clients to access the internet through the firewall server.
ArubaOS 6.3.x Quick Start Guide
This document provides instructions for the initial setup of an Aruba wireless network including a controller and access points (APs). The setup involves:
1. Configuring the controller via a web browser or serial console setup wizard.
2. Connecting the controller to the wired network.
3. Configuring the controller's DHCP server to assign IP addresses to APs when installed.
4. Installing and connecting the APs to the network to allow them to locate and connect to the controller.
Bootstrapping with bootp and dhcp
This document discusses the bootstrapping process and protocols used for network configuration of computers. It explains that the bootstrapping process begins with ROM code that loads an image into RAM. It then describes the two approaches for obtaining this image - from a network or local disk. It goes on to discuss protocols like BOOTP and DHCP that were developed to automate the process of configuring a computer's network settings like IP address after bootstrapping but before the operating system is loaded.
How to use mmdvm host wif main board
1. Connect the MMDVM host board to a PC using an RJ45 cable and USB power cable.
2. Access the MMDVM host web interface at 192.168.85.1 and configure the WiFi and radio settings.
3. Edit the MMDVM.ini file to configure the callsign, DMR ID, duplex settings, and radio frequencies as needed. Set the DMR and P25 enable settings and configure the DMR network.
Hyperlink
Bengkel Metadata, RDA & Hyperlink PUiTM 2010
Anjuran : BPBPT PTAR
Tarikh : 6 April 2010
Tempat : Pusat IT PTAR 1
Penceramah : En. Ahmad Faizar
Jawatan: Pustakawan
How to publish your NAS on the Internet?
This document provides instructions on how to publish a Thecus NAS on the internet using UPnP and port forwarding. It discusses creating a Thecus ID, applying for a free DDNS, and accessing the NAS remotely via web browser. Troubleshooting steps are included if access fails, such as checking the router, NAS UPnP settings, and manually configuring port forwarding on common routers like DD-WRT, Tomato, and NETGEAR. Appendices list the default NAS service ports and screenshots of router UPnP configuration pages.
More Related Content
What's hot
Des 3800 howto-en_guest-vlan_20060623
This document provides an example configuration of using a guest VLAN with 802.1x authentication. It describes setting up two VLANs, enabling 802.1x authentication and a guest VLAN on switch ports, and configuring a RADIUS server to assign authenticated devices to a target VLAN. The summary shows that in the guest VLAN state, unauthenticated devices can still access some resources, but after authenticating are assigned to the target VLAN by the RADIUS server and can now access those VLAN's resources.
Aeonmike pf clustering doc guide
This document provides instructions for configuring high availability between two pfSense firewalls using CARP synchronization. The key steps are:
1. Create firewall rules on each firewall to allow communication on the SYNC interface.
2. Configure the backup firewall for CARP synchronization to the SYNC interface only.
3. Configure the primary firewall for CARP synchronization of rules, NAT, and virtual IPs to the backup firewall's SYNC IP.
4. Create virtual IP addresses for the WAN and LAN interfaces that both firewalls will share and take over if the primary fails.
ASA CSC Module
The CSC SSM runs Content Security and Control software on some ASA models to provide protection against viruses, spyware, spam, and other unwanted traffic. It can scan FTP, HTTP/HTTPS, POP3, and SMTP traffic on their standard ports. You must obtain configuration information like the IP addresses and passwords to set up traffic scanning between the ASA and CSC SSM. The document provides steps to create access lists and policy maps to divert specified traffic to the CSC SSM for scanning.
Lacp Agreement
The document describes the Link Aggregation Control Protocol (LACP) agreement process between two devices. LACP allows devices to negotiate the automatic bundling of multiple network links. The process involves 6 steps of exchanging LACP data units (LACPDUs) between the devices. Through the exchange, the devices synchronize state information and verify compatibility to successfully establish a LACP aggregation.
VRRP
This document discusses the Virtual Router Redundancy Protocol (VRRP), which provides gateway redundancy when the primary gateway fails. VRRP uses hello messages and elects a master router based on priority to direct traffic to backup routers and avoid downtime. The configuration assigns IP addresses to interfaces, sets the virtual IP address, and adjusts the priority values for master and backup routers.
TCP Filtering on ASA
The document discusses various TCP inspection policies that can be set on an ASA firewall to control and inspect TCP connections and traffic. These policies include limiting the number of simultaneous and partially opened TCP connections, setting timeout durations for idle, half-closed and embryonic connections, decrementing TTL values, using random sequence numbers, and verifying TCP properties like retransmissions, checksums, ACK flags, and sequence numbers within windows. The policies are implemented using class-maps, policy-maps and applying the policies to interfaces.
How to Configure QinQ?
The QinQ technology is called VLAN dot1q tunnel, 802.1Q tunnel, VLAN Stacking technology. The standard comes from IEEE 802.1ad and it is the expansion of the 802.1Q protocol. QinQ adds one layer of 802.1Q tag (VLAN tag) based on the original 802.1Q packet head. With the double layers of tags, the VLAN quantity is increased to 802.1Q.
How to configure the QinQ? Here we will list two occasions and they can be applied to Huawei switches higher level than Quidway S2700 and with EI version, Huawei S3700 switches and Quidway S5700, etc.
Huawei ARG3 Router How To - Troubleshooting OSPF: Router ID Confusion
This document discusses troubleshooting an OSPF routing protocol configuration issue where routers have an incorrect router ID. It describes checking connectivity and routing tables between routers, which reveal inconsistencies. The root cause is identified as Router A having the wrong router ID of 2.2.2.2 instead of its interface IP 1.1.1.1. The configuration is corrected by changing Router A's router ID, saving the changes, and rebooting Router A. Verification shows routing tables on Router C are now updated correctly.
VPNBee firewall/VPN/load balancer from Gayatri Hitech based on OpenBSD pf
VPNBee is a firewall/UTM appliance based on OpenBSD pf. It employs technologies for ISP load balancing, server load balancing, VPN setup between branch offices, traffic shaping and QoS, IP packet filtering, sniffing, captive portal and so on.
Networking Puzzle
A good puzzle to solve which will clarify your networking concepts. Questions:
1> How and in which sequence Learning, Flooding and Forwarding will happen in Switch?
2> Find MAC and IP on every communication link shown in the figure?
Chapter 07
This chapter discusses router startup processes, configuration management, and troubleshooting connectivity issues. The router boot process involves a power-on self-test, loading the bootstrap, and then loading the Cisco IOS and configuration files. The configuration register controls boot functions. IP addresses can be configured on router interfaces in interface mode and switch interfaces in global mode. Troubleshooting tools include CDP, ping, trace, show commands, and debug commands.
Assigning ip addresses
The document discusses various FortiGate installation and configuration topics. It begins with basic installation and setup, then covers more advanced topics like connecting to dual ISPs, protecting servers, high availability, VLANs, virtual domains, and security enhancements. Specific sections address assigning static IP addresses via DHCP based on a device's MAC address, and ensuring certain devices always get the same IP from the FortiGate DHCP server by adding MAC-IP reservations.
Implementing Internet and MPLS BGP
For enterprise network engineers, implementing BGP can be an intimidating task. This presentation was given to address common architectures for internet and MPLS BGP usage, along with best practices.
Copy and save a configuration file from a router or switch using a laptop
The document provides steps to copy and save the configuration file from a Cisco router or Catalyst switch to a laptop using HyperTerminal. It describes connecting the laptop to the device console port, starting a HyperTerminal session, capturing the configuration output using the "show start" or "show config" command, and saving the output as a text file. It also covers differences between CatOS and Native IOS on Catalyst switches and resetting the terminal length.
Huawei SAN Storage How To - Assigning Management IP Address
In this second Huawei SAN Storage lesson, the topic of the day is “Assigning the Management IP Addresses”, in order to access, configure and diagnose the SAN Storage device, using the ISM (Integrated Storage Management) software.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to access origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
Configure Proxy and Firewall (Iptables)
1. The document provides instructions for configuring iptables firewall rules on a SUSE Linux server to set up a network with internal servers and clients.
2. It outlines steps to allow specific services and access between servers and clients like SSH, DNS, file sharing, remote desktop, and internet access.
3. The configuration includes setting up masquerading and destination NAT rules to enable connectivity and allow internal clients to access the internet through the firewall server.
ArubaOS 6.3.x Quick Start Guide
This document provides instructions for the initial setup of an Aruba wireless network including a controller and access points (APs). The setup involves:
1. Configuring the controller via a web browser or serial console setup wizard.
2. Connecting the controller to the wired network.
3. Configuring the controller's DHCP server to assign IP addresses to APs when installed.
4. Installing and connecting the APs to the network to allow them to locate and connect to the controller.
Bootstrapping with bootp and dhcp
This document discusses the bootstrapping process and protocols used for network configuration of computers. It explains that the bootstrapping process begins with ROM code that loads an image into RAM. It then describes the two approaches for obtaining this image - from a network or local disk. It goes on to discuss protocols like BOOTP and DHCP that were developed to automate the process of configuring a computer's network settings like IP address after bootstrapping but before the operating system is loaded.
How to use mmdvm host wif main board
1. Connect the MMDVM host board to a PC using an RJ45 cable and USB power cable.
2. Access the MMDVM host web interface at 192.168.85.1 and configure the WiFi and radio settings.
3. Edit the MMDVM.ini file to configure the callsign, DMR ID, duplex settings, and radio frequencies as needed. Set the DMR and P25 enable settings and configure the DMR network.
What's hot (20)
Huawei ARG3 Router How To - Troubleshooting OSPF: Router ID Confusion
Huawei ARG3 Router How To - Troubleshooting OSPF: Router ID Confusion
VPNBee firewall/VPN/load balancer from Gayatri Hitech based on OpenBSD pf
VPNBee firewall/VPN/load balancer from Gayatri Hitech based on OpenBSD pf
Copy and save a configuration file from a router or switch using a laptop
Copy and save a configuration file from a router or switch using a laptop
Huawei SAN Storage How To - Assigning Management IP Address
Huawei SAN Storage How To - Assigning Management IP Address
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer converted (labanna saha)
Similar to D E S
Hyperlink
Bengkel Metadata, RDA & Hyperlink PUiTM 2010
Anjuran : BPBPT PTAR
Tarikh : 6 April 2010
Tempat : Pusat IT PTAR 1
Penceramah : En. Ahmad Faizar
Jawatan: Pustakawan
How to publish your NAS on the Internet?
This document provides instructions on how to publish a Thecus NAS on the internet using UPnP and port forwarding. It discusses creating a Thecus ID, applying for a free DDNS, and accessing the NAS remotely via web browser. Troubleshooting steps are included if access fails, such as checking the router, NAS UPnP settings, and manually configuring port forwarding on common routers like DD-WRT, Tomato, and NETGEAR. Appendices list the default NAS service ports and screenshots of router UPnP configuration pages.
Tutorial mikrotik step by step anung muhandanu
This document provides a tutorial on configuring MikroTik routers for various purposes such as proxy servers, bandwidth management, NAT, bridging, and graphing. It discusses how to access MikroTik via the console, Winbox, or web interface. It also covers how to set up basic configurations like naming interfaces, assigning IP addresses, enabling transparent proxy, creating NAT and bandwidth limiting rules. The tutorial demonstrates how MikroTik can be used as a transparent web proxy, bandwidth limiter, bridge, and for traffic monitoring with MRTG/graphing.
Configure Webserver & SSL secure & redirect in SuSE Linux Enterprise
In this chapter you will be able:
-How to install webserver in suse linux server
-How to configure webserver
-How to hosting website and web application
-How to configure secure connection (SSL, Redirect)
versa router teletronics
The document provides instructions for setting up and using a wireless customer premises router (CPE). It includes:
1) An overview of the CPE and its capabilities, including routing traffic between a user network and internet service provider.
2) Details on proper network implementation, including using the CPE as a router between wired and wireless networks with different IP ranges.
3) Instructions for accessing and navigating the CPE's browser-based user interface to configure settings like IP addresses, default gateways, and wireless settings.
4) Step-by-step directions for basic CPE configuration options, including setting the CPE up as a router with network address translation between its Ethernet and wireless interfaces.
Basic Cisco ASA 5506-x Configuration (Firepower)
This document provides instructions for configuring basic network security on a Cisco ASA 5506-x firewall. It outlines requirements for separating networks into an Internet, user, and DMZ segment. It then provides steps to update the ASA software, configure interfaces and security levels, enable internet access via NAT and routing, allow web access to servers on the DMZ, optionally configure DHCP, and optionally redirect traffic to the FirePOWER module. It also includes steps for hardening the device by shutting down unused interfaces, enabling SSH access, and configuring time and logging.
Air Live Rs 1200
The AirLive RS-1200 is a multi-function security gateway that offers firewall, VPN, bandwidth management, content filtering, and other network security functions in one device. It has two WAN ports for load balancing or redundancy, and supports features like VPN, QoS bandwidth control, policy-based firewall, and virtual servers. The RS-1200 provides these comprehensive security functions for small offices or homes while being easy to configure and manage.
CCNA Connecting NetworksSA ExamLab 13 CCNA Connecting Netwo.docx
CCNA: Connecting Networks SA Exam
Lab 13 CCNA: Connecting Networks
CSIS 430 – Weeks 1 - 4
Hands-On Skills Assessment
Topology
Complete the assessment in Packet Tracer and document and fill in the blanks. Submit this file and the pka file in Week 8 Lab 13, Points will not be given for incomplete Steps.
Assessment Objectives
Part 1: Initialize Devices (2 points, 5 minutes)
Part 2: Configure Device Basic Settings (8 points, 20 minutes)
Part 3: Configure PPP Connections (7 points, 20 minutes)
Part 4: Configure NAT (4 points, 15 minutes)
Part 5: Monitor the Network (6 points, 15 minutes)
Part 6: Configure Frame Relay (7 points, 20 minutes)
Part 7: Configure a GRE VPN Tunnel (6 points, 20 minutes)
Scenario
In this Skills Assessment (SA) you will create a small network. You must connect the network devices and configure those devices to support various WAN protocols. This will require that you reload the routers before starting your configuration of the next WAN protocol. The assessment has you save your basic device configurations to flash prior to implementing a WAN protocol to allow you to restore these basic configurations after each reload.
The first WAN protocol you will configure is Point-to-Point Protocol (PPP) with CHAP authentication. You will also configure Network Address Translation (NAT), and network monitoring protocols during this phase of the assessment. After your instructor has signed off on this phase, you will reload the routers and configure Frame Relay. After the Frame Relay part is complete, and has been signed off by your instructor, you will reload the routers and configure a GRE VPN tunnel. Network configurations and connectivity will be verified throughout the assessment by using common CLI commands.
Required Resources
3 Routers (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)
3 PCs (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term.
Console cable to configure the Cisco IOS devices via the console ports
Ethernet and Serial cables as shown in the topology
Initialize Devices
Total points: 2
Time: 5 minutes
Initialize and reload routers.
Erase the startup configurations and reload the devices.
Task
IOS Command
Points
Erase the startup-config file on all routers.
erase startup-config
(1 point)
Reload all routers.
reload
(1 point)
Points: __________ of 2
Configure Device Basic Settings
Total points: 8
Time: 20 minutes
Configure PCs.
Assign static IPv4 address information (IP address, subnet mask, default gateway) to the three PCs in the topology. Refer to the Topology diagram to obtain the IP address information.
Configuration Item or Task
Specification
Points
Configure static IPv4 address information on PC-A.
IP Address: 192.168.11.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.11.1
1
Configure static IPv4 address information on PC-B.
IP Address: 192.168.22.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.22.1
Configure static IPv4 address information on PC ...
Configure Mikrotik Khmer.pdf
This document provides instructions for configuring a MikroTik router, including setting the IP address, default gateway, DHCP server, DNS server, and enabling access to the internet via DHCP or a static IP. It also describes how to assign IP addresses to clients via DHCP, set bandwidth limits for clients, block certain websites and file types, and create a web proxy and cache. The last section provides steps for setting up a hotspot on the MikroTik router.
cisco-ewan-nat-acl-pt-practice-sba-with-solution-110516171316-phpapp02.pdf
The document provides instructions to configure IP addressing, DHCP, WAN technologies including PPP and Frame Relay, EIGRP routing, NAT, and ACLs on routers R1, R2, and R3. Key steps include designing an IP addressing scheme, configuring R3 as a DHCP server, verifying connectivity over PPP and HDLC WAN links, configuring EIGRP routing, configuring NAT and PAT on R2, and applying ACLs to implement security policies.
Tutorial mikrotik step by step
This document provides a tutorial on configuring MikroTik routers for various purposes such as proxy servers, bandwidth management, NAT, bridging, and network monitoring. It discusses how to set up basic router configurations like naming interfaces and assigning IP addresses. It also explains how to configure MikroTik for functions like transparent proxy caching, bandwidth limiting using queues, network address translation (NAT), bridging multiple network segments, and network monitoring with MRTG graphs. The tutorial is intended to simplify MikroTik configurations for beginners.
acn-practical_manual-19-20-1 final.pdf
The document provides information about the CO5I Advanced Computer Network course, including:
- The course vision is to develop professionals with technical skills and ethical values to serve society.
- The course objectives are to impart technical knowledge, provide strong practical and theoretical skills in computer engineering, and develop necessary skills and ethics in students.
- The course outcomes include implementing various network layer, transport layer, and application layer protocols.
- The document lists several experiments related to networking concepts that students will perform, including subnetting, IPv6 configuration, routing protocols, and application layer protocols.
Tutorial mikrotik step by step anung muhandanu
This document provides a tutorial on configuring MikroTik routers for various purposes such as proxy servers, bandwidth management, bridging, and network address translation (NAT). It discusses how to access MikroTik devices, set up basic configurations like naming and IP addresses. It then explains how to configure MikroTik for transparent proxy servers, separate proxy servers, bandwidth limiting using queues, and bridging interfaces. The document also discusses enabling graphing tools on MikroTik to monitor traffic and system resources.
MikroTik Basic Training Class - Online Moduls - English
This document provides an overview of an introductory training class on MikroTik router configuration. It discusses MikroTik's history as a router software and hardware manufacturer, the capabilities of their RouterOS software and RouterBoard hardware, and how to connect to and configure a MikroTik router using Winbox. The training covers topics like the MikroTik interface, network addressing, static and dynamic routing, and basic router management tools.
Docker Meetup: Docker Networking 1.11 with Madhu Venugopal
In this talk, Madhu Venugopal will present Docker Networking & Service Discovery features shipped in 1.11 and new Experimental VLAN network drivers introduced in 1.11.
Docker 1.11 Meetup: Networking Showcase
Docker networking was introduced in Docker 1.9.0 and has continued to be improved upon and expanded. Key features introduced include support for multiple micro-segmented networks, built-in multihost networking using VXLAN, pluggable network plugins, and integration with Docker Swarm and Docker Compose. Later versions added additional capabilities like service discovery using embedded DNS, network load balancing, and experimental Macvlan and IPVlan drivers to connect containers to specific VLANs. Docker networking allows containers to be connected to different network types including default bridge networks, user-defined bridge networks, and overlay networks spanning multiple Docker hosts.
Docker Meetup: Docker Networking 1.11, by Madhu Venugopal
In this talk, Madhu Venugopal will present Docker Networking & Service Discovery features shipped in 1.11 and new Experimental Vlan network drivers introduced in 1.11.
R bernardino hand_in_assignment_week_1
The document discusses circuit switching vs packet switching networks, with circuit switching reserving bandwidth for constant real-time communication but being less efficient than packet switching which allocates bandwidth on demand. It also describes how botnets can compromise many devices to perform distributed denial of service attacks by recruiting devices to target servers.
siemens-tcp-ip-ethernet-manual.pdf
This property, in conjunction with the Simulated property, allows the status of communications and
values to be monitored within the server. Because communications are not maintained in simulated mode, mon-
itoring values eliminates the need to toggle the simulation on and off.
Note: This property is not available for all device types.
Device Properties - Scan Mode
The Scan Mode specifies the subscribed-client requested scan rate for tags that require device communica-
tions. Synchronous and asynchronous device reads and writes are processed as soon as possible; unaffected
by the Scan Mode properties.
Scan Mode: Specifies how tags in the device are scanned for updates sent to subscribing clients. Descriptions
of the options are:
l Resolve
Www ccnav5 net_ccna_3_v5_final_exam_answers_2014
This document provides the final exam answers for CCNA 3 v5 Scaling Networks from 2014. It includes 40 multiple choice questions related to networking topics like VLANs, trunking, routing, DHCP, wireless networking, and security. The questions are taken from the CCNA 3 v5 final exam and provide the correct answer choices for each question.
Similar to D E S (20)
Configure Webserver & SSL secure & redirect in SuSE Linux Enterprise
Configure Webserver & SSL secure & redirect in SuSE Linux Enterprise
CCNA Connecting NetworksSA ExamLab 13 CCNA Connecting Netwo.docx
CCNA Connecting NetworksSA ExamLab 13 CCNA Connecting Netwo.docx
cisco-ewan-nat-acl-pt-practice-sba-with-solution-110516171316-phpapp02.pdf
cisco-ewan-nat-acl-pt-practice-sba-with-solution-110516171316-phpapp02.pdf
MikroTik Basic Training Class - Online Moduls - English
MikroTik Basic Training Class - Online Moduls - English
Docker Meetup: Docker Networking 1.11 with Madhu Venugopal
Docker Meetup: Docker Networking 1.11 with Madhu Venugopal
Docker Meetup: Docker Networking 1.11, by Madhu Venugopal
Docker Meetup: Docker Networking 1.11, by Madhu Venugopal
Recently uploaded
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
OpenID AuthZEN Interop Read Out - Authorization
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Recently uploaded (20)
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
D E S
- 1. [sachin08080616607.blogspot.com/2010/03/unlimited-reliance-gprsedge-rs299-per.html] reliance mobile internet setting HANDSET SETTING: APN: rcomwap proxy address: 10.239.221.5 port: 8080 DESKTOP SETTING: CREATE DIAL UP CONNECTION APN: rcomwap INTERNET EXPLORER (WEB BROWSER) CONFIGURATION/SETTING: INTERNET EXPLORER TOOLS INTERNET OPTION CONNECTION DIAL UP NETWORK SETTING SETTING PROXY SERVER SELECT (MARK) USE PROXY SERVER FOR THIS CONNECTION ADDRESS: 10.239.221.5 PORT: 8080
- 2. Local area connection properties: Internet protocol version 4(TCP/IPv4) Properties IP adrdress: 169.254.169.74.... i.e., your compter IP address subnet mask: 255.255.0.0 Note: On unplugged natwork cable Of loal area network your computer through direct dial up internet connection may allow to surf(bowose) on net but downloading throw DAP may not work. Set auto dial up connetion & disable/enable LAN connetion as per situation of downloading resonse from DAP.