Raheel Shafiq Khero is seeking a job that provides technical and competitive opportunities in an advanced, dynamic work environment. He has a B.E in Textile Engineering from Hamdard University and worked in various roles and departments at textile companies, including assistant spinning engineer, shift supervisor, and shift incharge. His experience includes production planning, quality control, machine operation and maintenance. He is proficient in English and Microsoft Office software.
Distress of concrete structure & their repair techniques seminarMarcep Inc.
DAMAGES & FAILURES OF STRUCTURE
LOADS ON STRUCTURES
CAUSES OF FAILURE
FOUNDATION DAMAGE
INSPECTION
QUICK ASSESSMENT & CASE STUDIES
Case histories of failures and damages under various
agencies
Methods for solving Damage equations to predict
failures of Structures
Investigation of Damages & failures, birth & growth of
cracks
Analytical Studies for damage verification & for failure
mechanism
How Structural deterioration reliability used to calculate
probabilities of Strucutural failure
Dead loads, Live loads, water pressure, Earth pressure,
etc
The varying deterrent effect of all loads on Structures
Load & Resistance factor Design (LRFD)
Over loading, subsidence, chemical attack, dynamic
load, etc.
Poor training of field inspectors
Lack of appropriate professional design & construction
experience
Unwarranted belief in specified extreme loads and
properties
Substandard quality of construction materials
Inadequate supervision in constructing building
structures
Poor workmanship, lack of soil analysis
Settlement, Water logging, vegetation , etc
Damage from earthquakes and other natural causes.
Foundation failures and cracks
Distinguish, Identify & Assessment Pre-existing
foundation Damage
Visual, Measurement, NDT etc
Reliability Analysis & Periodic Inspection of Structures
Collective Inspection of Regular Structures
Risk based inspection (RBI) planning
RETROFITTING
SETTLEMENT REPAIRS
CRACK REPAIRS
CONCRETE REPAIRS
CFRP, GFRP, NSM
JACKETING REPAIRS
QUICK ASSESSMENT & CASE STUDIES
Methods, wrapping with FRP, jacketing, etc
Performance based optimal seismic retrofitting
Time-Dependent Behavior of FRP Retrofitting
Underpinning
Repair techniques for Settled Foundations
Repair Methods for Settled foundations
Materials, injection Method, stitching, etc
Inspection , Control & Repair of Cracks
Surface preparation
Identification, Assesment of the cause & extent of
the problem
Safety measures to avoid crack repair
Effectiveness of Concrete Repair
Application Method of Concrete Repair
Conventional repair of reinforced Concrete
Beam, Column etc
Strengthening & rehabilitation by reinforced
concrete jacketing Repairs
Distress of concrete structure & their repair techniques seminarMarcep Inc.
DAMAGES & FAILURES OF STRUCTURE
LOADS ON STRUCTURES
CAUSES OF FAILURE
FOUNDATION DAMAGE
INSPECTION
QUICK ASSESSMENT & CASE STUDIES
Case histories of failures and damages under various
agencies
Methods for solving Damage equations to predict
failures of Structures
Investigation of Damages & failures, birth & growth of
cracks
Analytical Studies for damage verification & for failure
mechanism
How Structural deterioration reliability used to calculate
probabilities of Strucutural failure
Dead loads, Live loads, water pressure, Earth pressure,
etc
The varying deterrent effect of all loads on Structures
Load & Resistance factor Design (LRFD)
Over loading, subsidence, chemical attack, dynamic
load, etc.
Poor training of field inspectors
Lack of appropriate professional design & construction
experience
Unwarranted belief in specified extreme loads and
properties
Substandard quality of construction materials
Inadequate supervision in constructing building
structures
Poor workmanship, lack of soil analysis
Settlement, Water logging, vegetation , etc
Damage from earthquakes and other natural causes.
Foundation failures and cracks
Distinguish, Identify & Assessment Pre-existing
foundation Damage
Visual, Measurement, NDT etc
Reliability Analysis & Periodic Inspection of Structures
Collective Inspection of Regular Structures
Risk based inspection (RBI) planning
RETROFITTING
SETTLEMENT REPAIRS
CRACK REPAIRS
CONCRETE REPAIRS
CFRP, GFRP, NSM
JACKETING REPAIRS
QUICK ASSESSMENT & CASE STUDIES
Methods, wrapping with FRP, jacketing, etc
Performance based optimal seismic retrofitting
Time-Dependent Behavior of FRP Retrofitting
Underpinning
Repair techniques for Settled Foundations
Repair Methods for Settled foundations
Materials, injection Method, stitching, etc
Inspection , Control & Repair of Cracks
Surface preparation
Identification, Assesment of the cause & extent of
the problem
Safety measures to avoid crack repair
Effectiveness of Concrete Repair
Application Method of Concrete Repair
Conventional repair of reinforced Concrete
Beam, Column etc
Strengthening & rehabilitation by reinforced
concrete jacketing Repairs
As the most recent and revolutionary technologies adapted for medical use, Virtual Reality and 3-D Printing, together, are poised to change the practice of medicine, and perhaps even upheave its scientific foundations.
1. RAHEEL SHAFIQ KHERO
Address: Defance view,phase 2,street #4,house # B-B-16 Karachi.
Contact No. (+92)-331-6399357
Email: raheelkhero@yahoo.com
OBJECTIVE
To get a job, that provides competitive technical opportunities parallel with advanced
and dynamic working environment.
EDUCATION
Hamdard University Karachi
2011 B.E (Textile )
Final Year Project: Comprehensive Study of Denim Fabric and m/c’s
2004 Mehran Degree College
F.Sc (Pre-Engineering)
2002 Gulistan Shah Abdul Latif Boys Sec School Karachi S.M.C.H.S
Matriculation (Computer Science)
EXPERIENCE
(From 4th
December 2013 to 18th
April 2014)
Designation:
Asst. Spinning Engineer
Departments:
Laboratory and Ring Department
Management Trainee
Experience:
Assisting in Preparing Production Planning and implementation
Record Keeping of Production related documents
Check status of machines and there running programes
Make reports of doff duration,doff position,ring speed.and speed of different machines
Making reports of Count,Strenght and work as a co-member of experiment team.
Check daily Ring machine stop spendles and make report
Visit all departments to learn and understand the machine gear setting,speed,sequence and matrial blending ratio
Make sure to present on flor to help workers if they feel any confusion
Watch maintenance team when they overhalling machines to understand the machine working and parts funtions
(From 11th
April 2011 to 19th
February2013)
Designation:
Management Trainee Officer
Promoted to Shift Supervisor
Departments:
Pre-Treatment
Finishing
Experience:
2.
Keep check the Quality,recipies and Machine status
Check the status of Grey and Folding departments.
Maintaining the floor status for ready to desizing,Scouring and Bleaching of Fabric
Programming of the Fabric to be Bleach and Finish for next 48 hours.
Co-ordinate with planning department for smooth running of production and order fulfillments within the specified delivery
dates.
Work with dyeing department disperse and vat dye for CRT (cabinet roll towel)
Work with Maintenance team to Change the gear box and steam pipes of jigger machine.
Work on the Analysis of Excess usage of Utilities such Gas,Power,Water and Air.
Maintain & Control the PH of Fabric a and Solutions.
(From 11th
March 2008 to 06th
January 2009)
Designation:
Shift Incharge
Departments:
I.P.S (Integrated Pastel Shades)
RDW & Zimmer Printing Machines
Experience:
Operate the software of IPS machine to dispense the pigment colours according to recipes.
Check the running programe for RDW and Zimmer Printing Machines
Making Formats at MS Office to keeping the record of Printed design and Printing machine sequence setting.
Checking the Programe provided by Production department for next 48hr to prepare IPS for given shedule
Making file record of new designe and provide it to Processing Manager when desgin again comes for printing
Make sure the printing past is ready for next running desgin for Printing
Not down the Zimmer & RDW Printing machines pressure,speed and sequence of screens on the m/c
Not down the temprature of drayer
check the printed fabric as a QC when it comes out from drayer and goes to trolly.
Check the viscosity of the print past
Co-ordinate with colour mens when they make colour matchings manually
Supervise the print past,reactive dye and string machine workers to make sure they doing work according to provided recipe
Make sure all workers follow Safety precautions to wear gloves,long rubber shoes,mask,eye goggles etc.
Attend workshop on Fire safety.
INTERNSHIPS
(From 23rd
July to 24th
August2010)
Designation:
Trainee
Department:
All departments of Company
Experience:
Visit all departments of the campany to understand the denim production and machines sequence
of operations.
Attended workshops on Supply Chain and Inventory Management.
(From 24th
July to 13st
August 2007)
Designation:
Trainee
3. Departments:
Visit all departments of Company
Make report on Main Store Stock
Experience:
Study machines catalogue books to understand the machine part functions and production sequence
Make a report on Main Store Stock of quick items,critical items,monthly items or Minimum Stock level of main store
Improve Equipment’s Reliability, Safety and Functionality.
PROJECT
(From 01th
Oct to 15th
Dec 2010)
Comprehensive Study of Denim Fabric & Machines.
POTENTIAL SKILLS
Expert in Team Orientation.
Excellent customer service ability.
Self-motivated and Results oriented.
Professional in appearance and attitude.
Able to thrive in a business environment.
Self-motivated and Excellent Team Player.
Proficient in speaking, reading and writing English.
KEY ATTRIBUTES AND SKILLS
Ability to make well thought out Decisions.
Honest, Reliable, Punctual and Trustworthy.
Able to take initiatives and directions quickly.
Excellent Written and verbal Communication Skills.
Possess strong Analytical and Problem Solving Skills.
Effective at Multi-tasking and Interpersonal Skills.
Flexible, Adaptive and Co-operative in Team Work.
MY PASSION
Prefer to work in Field and Plant sites.
Passionate for Industrial Sector Exposure .
Want to serve in challenging technical atmosphere to completely utilize my skills.
Desire to work in different departments in Competitive Environment to have keen
experience of Professional Enthusiasm.
SOFTWARE SKILLS
MS Office 2013
Visio, One Note
Outlook, Publisher
Word, Powerpoint, Excel
AutoCAD (2D & 3D)