curriculum vitae (1)
•Download as DOCX, PDF•
1 like•171 views
Fathy Abdulrashid Ali Koura is an electrical power engineer with 12 years of experience specialized in power and electrical machines. He holds a B.Sc. in electrical power engineering and machine department from Helwan University. His work experience includes various roles in Egypt and Saudi Arabia involving electrical maintenance, testing, and project management for power plants, buildings, and factories. He is a member of engineering syndicates in Egypt and Saudi Arabia and is proficient in Arabic and English.
Report
Share
Report
Share
![Curriculum vitae
FATHY ABDULRASHID ALI KOURA
Electrical Power Engineer.
12 Years Experiences .
Specialized in Power and Electrical Machines.
Member of the Syndicate of Engineering’s in Egypt & K.S.A.
PERSONAL DATA
Name
: Fathy Abdulrashid Ali Koura
Gender : Male
Date of Birth : 26/11/1979
Place of Birth : Almenoufia - Egypt
Country of Nationality : Egyptian
Religion : Muslim
Original Address : Talia Village – Ashmoun Center – Almenoufia –Egypt .
Current Address : Dammam City – Kingdom Of Saudi Arabia.
Mobile Number : +966543067262 / +966599887150 / 00201220132442 /0020483300027
/0020483300669
Email : fathykoura@yahoo.com
Marital Status : Married With children’s
Military Status : Exempted
EDUCATION
University Degree
: B.Sc. Electrical Power Engineer & Machine Department.
Faculty : FACULTY OF ENGINEERING.
DEPT. : Electrical Power & Electric Machines.
University : Helwan University
Year of Graduation : May 2003.
Graduation Degree : GOOD – (72.48 %) .
Faculty Project : [Universal Static Over Current Relay Protection on (M.V.T.Ls.)].
Project Degree : Excellent.
Languages : Arabic: mother tongue
English: good (written & spoken).
WORK EXPERIENCES
KEY Experience : I Have a vast Professional experience in my field . within my scope
, I Have been Involved in a lot of Projects where I’m Participated in the
Maintenance work for the Electrical Generators in a ( STEAM TURBINE POWER
PLANTS ) , Medium / Low Voltages Equipments , supervision on All Electrical TESTS ,
and among many other tasks in different Projects .
(6/2013 – TO DATE) I Transferred to work in ( K.S.A ) again in position a](https://image.slidesharecdn.com/835be13a-b1a9-4caa-a5e3-e1d540e4071a-150830181156-lva1-app6892/85/curriculum-vitae-1-1-320.jpg)
Recommended
Enhancement of power quality in a
This document summarizes a research paper that proposes a closed loop control system for a four-quadrant DC drive fed by a dual AC-DC buck converter to improve power quality. The system uses symmetrical multipulse modulation and feedback control to regulate the output voltage supplied to the DC drive. Simulation results show that the closed loop system provides better dynamic response, stability, voltage profile, power factor and reduced harmonic distortion compared to an open loop system, especially under varying load conditions. The paper analyzes the system's performance in the four quadrants of operation.
Mohamed Azzouz C.V
This document provides a summary of an individual's qualifications for an Electrical Commissioning Engineer position. It includes personal information, education history, work experience, skills, and awards. The individual has over 7 years of experience in testing and commissioning high voltage substations up to 380kV level. He has extensive hands-on experience testing various switchgear, protection relays, and commissioning protection schemes. He is proficient in commissioning software like DIGSI4, Micom, PCM and Enervista. The individual holds a bachelor's degree in electric power and machines from Cairo University with high honors and received an award from the Egyptian Governmental Electricity Company for best student.
resume sri
Srinivas Reddy Pilaka is an electrical engineer currently working as an Electrical Engineer at Gillanders Arbuthnot & Co. Ltd. He has over 6 years of experience in testing, commissioning, and maintenance of electrical equipment. He holds a B.E. in Electrical and Electronics Engineering and is seeking a new position with a salary of 8 lakhs INR per year where he can further contribute his skills. His expertise includes working with HT and LT panels, transformers, relays, and automation equipment.
Modeling and simulation of the induction motor feed by matrix converter
This document discusses modeling and simulation of an induction motor fed by a matrix converter. It provides background on direct and indirect AC-AC converters, with matrix converters being a direct converter. It describes the components and operation of a matrix converter, including modulation techniques. It also gives an overview of induction motors and their benefits. The document outlines modeling the matrix converter, induction motor, and their interaction. It concludes the matrix converter suppresses harmonics, allows regeneration, and improves power factor compared to other drive systems.
rashgggg
(1) Muhammad Rashid is seeking a challenging position utilizing his 5 years of experience in electrical maintenance and repair. (2) He has a B.Tech in electrical power engineering and diplomas in electrical engineering. (3) His experience includes apprenticeships and work at Engro Fertilizers and HUBCO power plant maintaining generators, transformers, switchgears, motors, and other electrical systems.
automatic phase changer in three phase supply
This document describes a project report for an automatic phase changer in a 3 phase power supply. It was submitted by 4 students to fulfill their Bachelor of Technology degree requirements. The project aims to automatically switch the phase supplied to single phase loads when one of the phases fails or is imbalanced. The report includes an introduction describing the need for such a system, block diagram, hardware details including circuit diagram and component descriptions, circuit design details and working. It concludes with features and limitations of the system.
Hamdy cv
This document is a curriculum vitae for Hamdi Kandil that includes personal details, education history, professional training courses, language skills, and work experience. Some key details include:
- Hamdi Kandil is married, Egyptian national born in 1983 in Alexandria. He holds a Bachelor's degree in Electrical Industrial Education from Suez Canal University and a diploma from Alexandria Advanced Technical School.
- His work experience includes positions as an electrical maintenance technician at Rashid Petroleum Company since 2015 and at Qatar Petrochemical Company from 2014-2015. Previous experience includes work at Alexandria Petroleum Maintenance Company and Alexandria Carbon Black.
- Relevant skills include electrical power systems, switchgear,
Operation of brushless dc motor drive with zeta
1) The document describes a brushless DC motor drive system using a Zeta converter for water pumping applications. A Zeta converter is a fourth-order DC-DC converter that can operate in both step-up and step-down modes.
2) The system uses a sensorless control method for the BLDC motor based on measuring the differences in back-electromotive force between motor phases to determine rotor position without position sensors.
3) Experimental results show that the BLDC motor pumping system using a Zeta converter can achieve good performance under starting, dynamic, and steady-state conditions with reduced switching losses compared to other converter topologies.
Recommended
Enhancement of power quality in a
This document summarizes a research paper that proposes a closed loop control system for a four-quadrant DC drive fed by a dual AC-DC buck converter to improve power quality. The system uses symmetrical multipulse modulation and feedback control to regulate the output voltage supplied to the DC drive. Simulation results show that the closed loop system provides better dynamic response, stability, voltage profile, power factor and reduced harmonic distortion compared to an open loop system, especially under varying load conditions. The paper analyzes the system's performance in the four quadrants of operation.
Mohamed Azzouz C.V
This document provides a summary of an individual's qualifications for an Electrical Commissioning Engineer position. It includes personal information, education history, work experience, skills, and awards. The individual has over 7 years of experience in testing and commissioning high voltage substations up to 380kV level. He has extensive hands-on experience testing various switchgear, protection relays, and commissioning protection schemes. He is proficient in commissioning software like DIGSI4, Micom, PCM and Enervista. The individual holds a bachelor's degree in electric power and machines from Cairo University with high honors and received an award from the Egyptian Governmental Electricity Company for best student.
resume sri
Srinivas Reddy Pilaka is an electrical engineer currently working as an Electrical Engineer at Gillanders Arbuthnot & Co. Ltd. He has over 6 years of experience in testing, commissioning, and maintenance of electrical equipment. He holds a B.E. in Electrical and Electronics Engineering and is seeking a new position with a salary of 8 lakhs INR per year where he can further contribute his skills. His expertise includes working with HT and LT panels, transformers, relays, and automation equipment.
Modeling and simulation of the induction motor feed by matrix converter
This document discusses modeling and simulation of an induction motor fed by a matrix converter. It provides background on direct and indirect AC-AC converters, with matrix converters being a direct converter. It describes the components and operation of a matrix converter, including modulation techniques. It also gives an overview of induction motors and their benefits. The document outlines modeling the matrix converter, induction motor, and their interaction. It concludes the matrix converter suppresses harmonics, allows regeneration, and improves power factor compared to other drive systems.
rashgggg
(1) Muhammad Rashid is seeking a challenging position utilizing his 5 years of experience in electrical maintenance and repair. (2) He has a B.Tech in electrical power engineering and diplomas in electrical engineering. (3) His experience includes apprenticeships and work at Engro Fertilizers and HUBCO power plant maintaining generators, transformers, switchgears, motors, and other electrical systems.
automatic phase changer in three phase supply
This document describes a project report for an automatic phase changer in a 3 phase power supply. It was submitted by 4 students to fulfill their Bachelor of Technology degree requirements. The project aims to automatically switch the phase supplied to single phase loads when one of the phases fails or is imbalanced. The report includes an introduction describing the need for such a system, block diagram, hardware details including circuit diagram and component descriptions, circuit design details and working. It concludes with features and limitations of the system.
Hamdy cv
This document is a curriculum vitae for Hamdi Kandil that includes personal details, education history, professional training courses, language skills, and work experience. Some key details include:
- Hamdi Kandil is married, Egyptian national born in 1983 in Alexandria. He holds a Bachelor's degree in Electrical Industrial Education from Suez Canal University and a diploma from Alexandria Advanced Technical School.
- His work experience includes positions as an electrical maintenance technician at Rashid Petroleum Company since 2015 and at Qatar Petrochemical Company from 2014-2015. Previous experience includes work at Alexandria Petroleum Maintenance Company and Alexandria Carbon Black.
- Relevant skills include electrical power systems, switchgear,
Operation of brushless dc motor drive with zeta
1) The document describes a brushless DC motor drive system using a Zeta converter for water pumping applications. A Zeta converter is a fourth-order DC-DC converter that can operate in both step-up and step-down modes.
2) The system uses a sensorless control method for the BLDC motor based on measuring the differences in back-electromotive force between motor phases to determine rotor position without position sensors.
3) Experimental results show that the BLDC motor pumping system using a Zeta converter can achieve good performance under starting, dynamic, and steady-state conditions with reduced switching losses compared to other converter topologies.
Eng Hossam Barakat C.V
Hossam Barakat has over 30 years of experience as an electrical engineer working in oil and gas facilities in Egypt and the UAE. He has expertise in electrical maintenance, construction, pre-commissioning, and start up of power generation and distribution systems up to 66kV. His experience includes working with switchgears, transformers, motors, generators, and protection systems. He is proficient in SAP and CMMS systems and has taught electrical engineering subjects.
Cascaded multilevel inverter
A Prototype model of Field Programmable Gate Array (FPGA) Based Nine Level Cascaded Multilevel Inverter is to be designed and Implemented to produce AC output voltage of desired magnitude and frequency.
Professional CV - Wamedh Al-Mussawi
Wamedh M.T. Al-Mussawi is an electrical engineer from Basrah, Iraq with over 15 years of experience in electrical engineering projects. He has worked on projects in Iraq, UAE, and Kuwait including building hospitals, plants, transmission lines, and infrastructure for oil and shipping companies. As a senior electrical engineer, he has experience supervising teams, managing projects, and maintaining electrical systems including generators, switchgear, motors, and transformers. He holds a Bachelor's degree in Electrical Engineering from the University of Basrah and received additional training in safety, electrical systems, and software programs throughout his career.
AC/DC/AC Converter Fed RLC Series
An all-electric driveline based on a double wound flywheel, connected in series between main energy storage and a wheel motor, is presented. The flywheel works as a power buffer, allowing the battery to deliver optimized power. It also separates electrically the system in two sides, with the battery connected to the low voltage side and the wheel motor connected to the high voltage side. This paper presents the implementation and control of the AC/DC/AC converter, used to connect the flywheel high voltage windings to the wheel motor. The converter general operation and the adopted control strategy are discussed. The implementation of the AC/DC/AC converter has been described from a practical perspective. Results from experimental tests performed in the full-system prototype are presented. The prototype system is running with satisfactory stability during acceleration mode. Good efficiency and unity power factor could be achieved, based on vector control and space vector modulation
A multilevel medium voltage inverter
This document proposes a multilevel medium-voltage inverter for direct grid connection of photovoltaic power plants without a step-up transformer. Recently, large PV power plants require medium-voltage connections but current systems use heavy transformers for voltage step-up. The proposed system uses a magnetic link to interconnect multiple PV arrays into a single source and generate isolated DC supplies for a multilevel inverter. This allows direct connection to the medium-voltage grid while overcoming issues like voltage imbalance and providing electrical isolation. Experimental results validated the system and demonstrated its advantages over traditional approaches using transformers.
AUTOMATIC THREE PHASE SUPPLY CHANGOVER
This document describes an automatic three phase supply changerover system. It contains an introduction, types of electric power supply, block diagram, components used, applications, advantages, future scope, description of project, and references. The system allows for connection of three power supply sources simultaneously and automatic switching between them without delay if the priority source is lost. It ensures uninterrupted power supply and reduces downtime through automatic changeover.
Forharsha basha
This document presents a new multi-level inverter topology for solar energy applications. It uses a H-bridge structure with four switches connected to the DC link. It proposes a new PWM method that requires only one carrier signal. The switching sequence balances the capacitor voltages. The proposed topology requires a minimum number of components to increase the number of voltage levels. It provides simulation results showing the output voltage and current waveforms for the multi-level inverter with a solar input. The system has advantages of simple structure, low power consumption, and operating at the fundamental frequency.
Multi level inverter
This document discusses a multilevel inverter project. A multilevel inverter provides alternating voltage output using multiple lower level DC voltages as input. The project aims to generate sinusoidal AC voltage up to the multilevel by comparing a 2-level inverter to the multilevel inverter. Multilevel inverters produce outputs that are closer to pure sinusoidal waves and are important for applications requiring higher power and voltage levels like industrial motor drives and power grids.
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNEC...
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNECTION OF PHOTOVOLTAIC POWER PLANT
Automatic Phase Changer
This document describes an automatic phase changer circuit that can shift the load to an alternate power phase if the voltage drops below a certain level in one of the phases. The circuit uses three identical sets that each correspond to one of the three phases (R, Y, B). Each set includes a transformer, comparator, transistor and relay. The transformer steps down the voltage which is then rectified and used as input for the comparator. The comparator compares this voltage to a reference voltage and triggers the transistor and relay if the phase voltage is low, shifting the load to another phase with sufficient voltage. This automatic switching prevents equipment downtime if one phase loses power.
Novel Direct Switching Power Control Method of UPFC by Using Matrix Converte...
This paper presents a direct Switching power control for three-phase matrix converters
operating as unified power flow controllers (UPFCs). Matrix converters (MCs) allow the direct ac/ac
power conversion without dc energy storage links; therefore, the MC-based UPFC (MC-UPFC) has
reduced volume and cost, reduced capacitor power losses, together with higher reliability. Theoretical
principles of direct Switching power control based on sliding mode control techniques are established
for an MC-UPFC dynamic model including the input filter. As a result, line active and reactive power,
together with ac supply reactive power, can be directly controlled by selecting an appropriate matrix
converter switching state guaranteeing good steady-state and dynamic responses. Experimental results
of DSPC controllers for MC-UPFC show decoupled active and reactive power control, zero steady-state
tracking error, and fast response times. Compared to an MC-UPFC using active and reactive power
linear controllers based on a modified Venturing high-frequency PWM modulator, the experimental
results of the advanced DSPC-MC guarantee faster responses without overshoot and no steady state
error, presenting no cross-coupling in dynamic and steady-state responses
Shailesh (10708)
This presentation discusses a step up chopper, which is a type of DC-DC converter that can increase voltage from a DC source. It operates by using semiconductors to create adjustable DC voltage from a fixed DC voltage source. A high step-up DC-DC converter is important for photovoltaic systems to improve efficiency by providing a stable high voltage link to the inverter. The presentation includes equations to calculate duty cycle, load resistance, capacitor size, and inductor size for a step-down chopper. It also discusses applications of choppers in electric vehicles, aircraft, and computer power supplies and analyzes a two-phase step-up converter design in MATLAB.
Raju
The document provides a resume for Srinivasa Raju.A who is seeking assignments in electrical erection, commissioning, and maintenance in power plants and blast furnaces, with over 15 years of experience in these areas while working at various companies in Karnataka, India, most recently as a Deputy Manager at Kirloskar Ferrous Industries responsible for electrical equipment related to blast furnaces and power plants.
Digital phase selector
The document discusses an automatic phase selector (DPS) device that can automatically switch the power supply to loads from available phases. It senses which phase has power and switches the relay contacts to provide power from that phase to prevent interruptions. It is useful in developing countries with unstable power and prevents damage or losses from manual switching. The DPS has a phase sensing block, control logic block to decide phase priority, and relay driver block to control the relay. It can switch single phase loads and is compact, economical, and avoids mechanical contacts. It has applications in apartments, emergencies, industries, offices, malls, and engineering colleges.
CVJ_29466149_20150624093911
1. Ahmed Mohamed Ahmed Atallah is seeking a job in an electrical company to gain experience and help the company grow.
2. He has a B.Sc. in Electrical Engineering from Shorouk University and over 5 years of experience in electrical installation, commissioning, and maintenance work in power plants in Egypt.
3. His experience includes working with medium and low voltage systems, protection devices, switchgear, cables, and commissioning various electrical equipment from manufacturers like Siemens, ABB, and Mitsubishi.
Wd0000018.docx Resume
This document provides a summary of James Ahampton's work experience including over 35 years of experience in electrical maintenance and 5 years as an owner operator of a trucking company. He has extensive skills in electrical systems, preventative maintenance, PLC programming, and maintenance of equipment up to 500kv. His work history includes positions as an electrician, substation electrician, supervisor of maintenance for a corrections facility, and as an owner operator of his own trucking company.
three phase auto loadshed phase shift system
This three sentence summary provides the key details about the project report:
The project report describes a three phase auto conversion system that detects when a phase loses power and uses a microcontroller to automatically reroute power from another active phase to maintain power delivery. It uses current sensing circuits, relays controlled by a microcontroller, and fuses for overcurrent protection. The system was simulated in Proteus and a PCB was designed to automatically switch phases without interruption of power when one phase fails.
SAMER ALI CV
Samer Saber Ahmad Ali is an electrical engineer from Amman, Jordan seeking new opportunities. He has a B.Sc. in Electrical Power Engineering from Al-Balqa Applied University and over 8 years of experience designing, installing, and supervising electrical systems for buildings and industrial projects in Jordan and Saudi Arabia. His skills include electrical load calculations, designing power distribution systems, supervising wiring installations, and implementing low voltage and data cabling systems.
Review on Speed and Direction Control of DC Motor By using Single MOSFET and ...
This document describes a circuit design for controlling the speed and direction of a DC motor using a single MOSFET and two SPDT relays.
Traditionally, an H-bridge circuit with four switches is used to control DC motor speed and direction. The proposed circuit aims to simplify this design by using a single MOSFET controlled by pulse-width modulation to vary motor speed, and two SPDT relays controlled by separate signals to select motor direction.
The document outlines the circuit schematic, operating principles, control logic, and advantages of the proposed design. It claims the design offers improvements over traditional H-bridge circuits in terms of lower cost, simpler design, reduced component count, and greater reliability.
auto-matic phase changer
Power instability in developing countries creates the need for automation of phase selection or alternative sources of power to back-up the utility supply.
Most industrial and commercial applications are dependent on power supply.
If the process of changeover of phase is manual, not only considerable time is wasted but also the device or machine may get damaged from human error during the changeover connections occurring massive losses.
STKI Summit 2014 - How does CIO deliver?
Trends and recommendations in Infrastructure, Operations and Development trends including modular DC, Storage, Networks, Servers, Desktops, Thin Clients, Security, Software Development, IT organization, IT Procurement and more.
More Related Content
What's hot
Eng Hossam Barakat C.V
Hossam Barakat has over 30 years of experience as an electrical engineer working in oil and gas facilities in Egypt and the UAE. He has expertise in electrical maintenance, construction, pre-commissioning, and start up of power generation and distribution systems up to 66kV. His experience includes working with switchgears, transformers, motors, generators, and protection systems. He is proficient in SAP and CMMS systems and has taught electrical engineering subjects.
Cascaded multilevel inverter
A Prototype model of Field Programmable Gate Array (FPGA) Based Nine Level Cascaded Multilevel Inverter is to be designed and Implemented to produce AC output voltage of desired magnitude and frequency.
Professional CV - Wamedh Al-Mussawi
Wamedh M.T. Al-Mussawi is an electrical engineer from Basrah, Iraq with over 15 years of experience in electrical engineering projects. He has worked on projects in Iraq, UAE, and Kuwait including building hospitals, plants, transmission lines, and infrastructure for oil and shipping companies. As a senior electrical engineer, he has experience supervising teams, managing projects, and maintaining electrical systems including generators, switchgear, motors, and transformers. He holds a Bachelor's degree in Electrical Engineering from the University of Basrah and received additional training in safety, electrical systems, and software programs throughout his career.
AC/DC/AC Converter Fed RLC Series
An all-electric driveline based on a double wound flywheel, connected in series between main energy storage and a wheel motor, is presented. The flywheel works as a power buffer, allowing the battery to deliver optimized power. It also separates electrically the system in two sides, with the battery connected to the low voltage side and the wheel motor connected to the high voltage side. This paper presents the implementation and control of the AC/DC/AC converter, used to connect the flywheel high voltage windings to the wheel motor. The converter general operation and the adopted control strategy are discussed. The implementation of the AC/DC/AC converter has been described from a practical perspective. Results from experimental tests performed in the full-system prototype are presented. The prototype system is running with satisfactory stability during acceleration mode. Good efficiency and unity power factor could be achieved, based on vector control and space vector modulation
A multilevel medium voltage inverter
This document proposes a multilevel medium-voltage inverter for direct grid connection of photovoltaic power plants without a step-up transformer. Recently, large PV power plants require medium-voltage connections but current systems use heavy transformers for voltage step-up. The proposed system uses a magnetic link to interconnect multiple PV arrays into a single source and generate isolated DC supplies for a multilevel inverter. This allows direct connection to the medium-voltage grid while overcoming issues like voltage imbalance and providing electrical isolation. Experimental results validated the system and demonstrated its advantages over traditional approaches using transformers.
AUTOMATIC THREE PHASE SUPPLY CHANGOVER
This document describes an automatic three phase supply changerover system. It contains an introduction, types of electric power supply, block diagram, components used, applications, advantages, future scope, description of project, and references. The system allows for connection of three power supply sources simultaneously and automatic switching between them without delay if the priority source is lost. It ensures uninterrupted power supply and reduces downtime through automatic changeover.
Forharsha basha
This document presents a new multi-level inverter topology for solar energy applications. It uses a H-bridge structure with four switches connected to the DC link. It proposes a new PWM method that requires only one carrier signal. The switching sequence balances the capacitor voltages. The proposed topology requires a minimum number of components to increase the number of voltage levels. It provides simulation results showing the output voltage and current waveforms for the multi-level inverter with a solar input. The system has advantages of simple structure, low power consumption, and operating at the fundamental frequency.
Multi level inverter
This document discusses a multilevel inverter project. A multilevel inverter provides alternating voltage output using multiple lower level DC voltages as input. The project aims to generate sinusoidal AC voltage up to the multilevel by comparing a 2-level inverter to the multilevel inverter. Multilevel inverters produce outputs that are closer to pure sinusoidal waves and are important for applications requiring higher power and voltage levels like industrial motor drives and power grids.
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNEC...
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNECTION OF PHOTOVOLTAIC POWER PLANT
Automatic Phase Changer
This document describes an automatic phase changer circuit that can shift the load to an alternate power phase if the voltage drops below a certain level in one of the phases. The circuit uses three identical sets that each correspond to one of the three phases (R, Y, B). Each set includes a transformer, comparator, transistor and relay. The transformer steps down the voltage which is then rectified and used as input for the comparator. The comparator compares this voltage to a reference voltage and triggers the transistor and relay if the phase voltage is low, shifting the load to another phase with sufficient voltage. This automatic switching prevents equipment downtime if one phase loses power.
Novel Direct Switching Power Control Method of UPFC by Using Matrix Converte...
This paper presents a direct Switching power control for three-phase matrix converters
operating as unified power flow controllers (UPFCs). Matrix converters (MCs) allow the direct ac/ac
power conversion without dc energy storage links; therefore, the MC-based UPFC (MC-UPFC) has
reduced volume and cost, reduced capacitor power losses, together with higher reliability. Theoretical
principles of direct Switching power control based on sliding mode control techniques are established
for an MC-UPFC dynamic model including the input filter. As a result, line active and reactive power,
together with ac supply reactive power, can be directly controlled by selecting an appropriate matrix
converter switching state guaranteeing good steady-state and dynamic responses. Experimental results
of DSPC controllers for MC-UPFC show decoupled active and reactive power control, zero steady-state
tracking error, and fast response times. Compared to an MC-UPFC using active and reactive power
linear controllers based on a modified Venturing high-frequency PWM modulator, the experimental
results of the advanced DSPC-MC guarantee faster responses without overshoot and no steady state
error, presenting no cross-coupling in dynamic and steady-state responses
Shailesh (10708)
This presentation discusses a step up chopper, which is a type of DC-DC converter that can increase voltage from a DC source. It operates by using semiconductors to create adjustable DC voltage from a fixed DC voltage source. A high step-up DC-DC converter is important for photovoltaic systems to improve efficiency by providing a stable high voltage link to the inverter. The presentation includes equations to calculate duty cycle, load resistance, capacitor size, and inductor size for a step-down chopper. It also discusses applications of choppers in electric vehicles, aircraft, and computer power supplies and analyzes a two-phase step-up converter design in MATLAB.
Raju
The document provides a resume for Srinivasa Raju.A who is seeking assignments in electrical erection, commissioning, and maintenance in power plants and blast furnaces, with over 15 years of experience in these areas while working at various companies in Karnataka, India, most recently as a Deputy Manager at Kirloskar Ferrous Industries responsible for electrical equipment related to blast furnaces and power plants.
Digital phase selector
The document discusses an automatic phase selector (DPS) device that can automatically switch the power supply to loads from available phases. It senses which phase has power and switches the relay contacts to provide power from that phase to prevent interruptions. It is useful in developing countries with unstable power and prevents damage or losses from manual switching. The DPS has a phase sensing block, control logic block to decide phase priority, and relay driver block to control the relay. It can switch single phase loads and is compact, economical, and avoids mechanical contacts. It has applications in apartments, emergencies, industries, offices, malls, and engineering colleges.
CVJ_29466149_20150624093911
1. Ahmed Mohamed Ahmed Atallah is seeking a job in an electrical company to gain experience and help the company grow.
2. He has a B.Sc. in Electrical Engineering from Shorouk University and over 5 years of experience in electrical installation, commissioning, and maintenance work in power plants in Egypt.
3. His experience includes working with medium and low voltage systems, protection devices, switchgear, cables, and commissioning various electrical equipment from manufacturers like Siemens, ABB, and Mitsubishi.
Wd0000018.docx Resume
This document provides a summary of James Ahampton's work experience including over 35 years of experience in electrical maintenance and 5 years as an owner operator of a trucking company. He has extensive skills in electrical systems, preventative maintenance, PLC programming, and maintenance of equipment up to 500kv. His work history includes positions as an electrician, substation electrician, supervisor of maintenance for a corrections facility, and as an owner operator of his own trucking company.
three phase auto loadshed phase shift system
This three sentence summary provides the key details about the project report:
The project report describes a three phase auto conversion system that detects when a phase loses power and uses a microcontroller to automatically reroute power from another active phase to maintain power delivery. It uses current sensing circuits, relays controlled by a microcontroller, and fuses for overcurrent protection. The system was simulated in Proteus and a PCB was designed to automatically switch phases without interruption of power when one phase fails.
SAMER ALI CV
Samer Saber Ahmad Ali is an electrical engineer from Amman, Jordan seeking new opportunities. He has a B.Sc. in Electrical Power Engineering from Al-Balqa Applied University and over 8 years of experience designing, installing, and supervising electrical systems for buildings and industrial projects in Jordan and Saudi Arabia. His skills include electrical load calculations, designing power distribution systems, supervising wiring installations, and implementing low voltage and data cabling systems.
Review on Speed and Direction Control of DC Motor By using Single MOSFET and ...
This document describes a circuit design for controlling the speed and direction of a DC motor using a single MOSFET and two SPDT relays.
Traditionally, an H-bridge circuit with four switches is used to control DC motor speed and direction. The proposed circuit aims to simplify this design by using a single MOSFET controlled by pulse-width modulation to vary motor speed, and two SPDT relays controlled by separate signals to select motor direction.
The document outlines the circuit schematic, operating principles, control logic, and advantages of the proposed design. It claims the design offers improvements over traditional H-bridge circuits in terms of lower cost, simpler design, reduced component count, and greater reliability.
auto-matic phase changer
Power instability in developing countries creates the need for automation of phase selection or alternative sources of power to back-up the utility supply.
Most industrial and commercial applications are dependent on power supply.
If the process of changeover of phase is manual, not only considerable time is wasted but also the device or machine may get damaged from human error during the changeover connections occurring massive losses.
What's hot (20)
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNEC...
A MULTILEVEL MEDIUM VOLTAGE INVERTER FOR STEP UP TRANSFORMER LESS GRID CONNEC...
Novel Direct Switching Power Control Method of UPFC by Using Matrix Converte...
Novel Direct Switching Power Control Method of UPFC by Using Matrix Converte...
Review on Speed and Direction Control of DC Motor By using Single MOSFET and ...
Review on Speed and Direction Control of DC Motor By using Single MOSFET and ...
Viewers also liked
STKI Summit 2014 - How does CIO deliver?
Trends and recommendations in Infrastructure, Operations and Development trends including modular DC, Storage, Networks, Servers, Desktops, Thin Clients, Security, Software Development, IT organization, IT Procurement and more.
Relatorio gestao itapetininga-prestacao-contas-2005-2012
intitulada “Relatório de Gestão: 2005 - 2012” esta obra que tem como finalidade apresentar à sociedade de Itapetininga, de forma condensada, dados e informações importantes da administração pública municipal que podem subsidiar a discussão de temas fundamentais para o desenvolvimento socioeconômico local, aprimorando procedimento semelhante adotado em 2008.
ITC Facepainting Day 2015
Members and providers at an organization had fun face painting for Facepainting Day 2015, using their imagination and skills to create unique face paintings for each other. Photos were shared of the creative facepainting designs done by the "Picassos" and "Rembrandts" to celebrate their artistic masterpieces.
Expo Hospital 2015
Este documento propone el uso de redes de salud inteligentes e innovación tecnológica para mejorar la atención médica. Plantea implementar sistemas de telemedicina y salud virtual para mejorar el acceso a especialistas, reducir tiempos de espera y brindar atención más eficiente y oportuna a pacientes, especialmente en zonas remotas. También propone usar datos e historias clínicas digitales para mejorar la coordinación entre médicos y el manejo integral de problemas de salud.
Première application pour les annonces légales
L'Itinérant est le tout premier acteur économique à tenter l'aventure de la mobilité pour les publications légales et officielles. Il a développé la première et seule application pour les annonces légales jamais mise au point en France !
Steve jobs
Steven Jobs was an American technology entrepreneur and inventor who co-founded Apple Inc. and served as CEO until resigning in 2011 for health reasons. He is credited with helping launch the personal computer revolution with the Apple II and introduced innovative products like the iMac, iPod, iPhone and iPad. After being ousted from Apple, Jobs founded NeXT which was later acquired by Apple, returning him to the company as CEO where he helped revitalize Apple and introduced many successful products until his death in 2011.
Partnering on CWR research at three scales: commonalities for success
The potential for crop wild relatives (CWR) to contribute to crop improvement is growing due to improvements in information on species and their diversity, advancements in breeding tools, and the growing need for exotic genetic diversity to address compounding agronomic challenges. As wild plants, CWR are subject to a myriad of human caused threats to natural ecosystems, and their representation ex situ is often far from comprehensive. Ex situ conservation of many of these wild plants is also technically challenging, particularly in an environment of insufficient resources. Enhancing conservation, availability, and access to CWR requires a spectrum of action spanning basic and applied research on wild species to inform on-the-ground collecting, ex situ maintenance, and germplasm utilization. The development of effective information channels and productive partnerships between diverse organizations are essential to the success of these actions. Here we report on a spectrum of CWR activities involving broad partnerships, at three levels: a) the collaborative compilation and distribution on over 5 million occurrence data records on the CWR of major food crops, b) the analysis of conservation concerns and genetic resources potential of the CWR of potato, sweetpotato, and pigeonpea, and c) ongoing efforts to map the diversity and conservation concerns for CWR in the USA. Although differing in scales and depth of collaborations, the success of these initiatives are largely due to commonalities in research orientation, e.g., inclusiveness, offering clear incentives for involvement, and service providing to the crop science community.
Microsoft Marketing Strategies
Microsoft was established in 1975 by Bill Gates and Paul Allen. It became a multinational technology company headquartered in Redmond, Washington. Microsoft develops, manufactures, licenses, supports and sells computer software, consumer electronics, personal computers, and services. It has strengths in flexible workforce and high brand recognition, but also faces threats from competitors in mobile and desktop operating systems. Microsoft's HR practices focus on recruitment, training, compensation and benefits, performance management, and work-life balance.
Viewers also liked (12)
Relatorio gestao itapetininga-prestacao-contas-2005-2012
Relatorio gestao itapetininga-prestacao-contas-2005-2012
Use these flashcards to ready yourself for the Performance Assessment
Use these flashcards to ready yourself for the Performance Assessment
Partnering on CWR research at three scales: commonalities for success
Partnering on CWR research at three scales: commonalities for success
Similar to curriculum vitae (1)
M.Ibrahim_Adv
Mohamed Ibrahim is a senior electrical engineer with over 13 years of experience in testing and commissioning protection relays, switchgear, and transformers. He has worked for companies such as Siemens, Lucy Electric, and NDEDC in various roles involving commissioning electrical systems, overseeing substations, and training customers. Ibrahim holds a Bachelor's degree in Electrical Power and Machine Engineering and is licensed to work in the UAE.
Saladin c.v
Salah eldin Mohamed badry is an electrical maintenance and operation manager seeking a new position. He has over 12 years of experience in electrical installations, commissioning, maintenance, and fitting. He is proficient in Arabic and English and has a bachelor's degree in electrical engineering. His experience includes testing and commissioning engineering, maintenance engineering, and senior electrical operation and maintenance engineering roles.
Abdel Rahman Mokhtar C.V. updated
Abdelrahman Mokhtar is an electrical engineer seeking a challenging career in engineering. He has over 5 years of experience in testing and commissioning high, medium, and low voltage substations in Saudi Arabia. He also has 1 year of experience as a sales engineer in Egypt. He holds a Bachelor's degree in Power and Electrical Machines from Ain Shams University in Egypt.
Ahmad Ismail Resume jan2015
The document is a resume for Ahmed Ismail Madbouly Mohamed providing details about his contact information, career objective, education, work experience, projects, training, courses, language skills, and personal information. It outlines his Bachelor's degree in Electrical Power Engineering from Helwan University in Egypt and over 10 years of experience in testing and commissioning electrical power systems as an electrical field service engineer and team leader in Saudi Arabia. His experience includes working on projects for companies like SIEMENS, Saudi Aramco, and Sabic.
Eng.Tamer CV
Tamer Ali is an electric engineer from Egypt with over 15 years of experience in maintenance, installation, testing, and commissioning of switchgear and protection systems. He has a BSc in electrical engineering from Cairo University and is proficient in English. His experience includes working as a senior protection engineer and protection engineer for companies in Saudi Arabia and Libya.
CV- Abbas Essa
This document is a curriculum vitae for Abbas Salem Issa. It provides personal information such as his name, address, contact details, nationality, and marital status. It also outlines his professional experience as a Senior Electrical Engineer for Saudi Bin Ladin Group from 2009 to present working on the King Abdullah Financial District project in Riyadh, Saudi Arabia. Prior to this, he worked as an Electrical Engineer for Ahmad Badaweih Establishment in Amman, Jordan from 2007 to 2009. His education is listed as obtaining a BSc in Electrical Power Engineering from AL-Balqa'a Applied University in Jordan in 2007. Relevant training and skills are also included such as courses in home automation, BMS systems, and computer
SAFIQUL-ALIN( Modified)
Md. Safiqul Islam Hawlader is applying for the position of Electrical Technician. He has a diploma in electrical engineering from 2001 and secondary school certificate from 1994. He has over 11 years of experience working for DEWA as a Foreman, where his duties include cable testing, fault location and rectification, maintenance of electrical distribution equipment, and responding to customer complaints. He also has previous experience of 2 years as a wiring electrician and 1.5 years as an electrical supervisor on other projects in Dubai and Bangladesh. He has participated in several training programs on power cables, distribution networks, switchgear maintenance, and health and safety.
c.v
The document contains an electrical engineer's resume, including his objective of obtaining a challenging career where he can utilize and develop his knowledge and skills, educational background obtaining a BSC in electrical power and control engineering, and work experience as an electrical site engineer supervising installation and testing of electrical equipment at a power plant project in Egypt.
Asad Ali Shah cv
This document contains personnel information and work history for Asad Ali Shah, including his contact information, qualifications, skills, and 12 years of experience working as an electrical supervisor on various projects in Pakistan, UAE, and Saudi Arabia. Shah has experience supervising installations, testing, and commissioning of electrical equipment such as substations, transformers, generators, and switchgear. He is proficient in English, Arabic, Urdu, and Pashto and has skills in areas like cable testing, electrical drawings, and maintenance/troubleshooting of low and high voltage systems.
ENGHOSSAM kHAIRY
This curriculum vitae is for Hossam Khairy Mohamed Hussein, an Egyptian electrical engineer currently working as a project engineer in Saudi Arabia. It summarizes his educational background which includes a BSc and masters in electrical engineering. It also outlines his professional experience as an operations engineer in Egypt and as a protection engineer. Finally, it lists his training and skills in areas like substation protection, testing equipment, and computer programs.
Saladin c.v
This document contains the resume of Salah eldin Mohamed badry, an Egyptian electrical engineer seeking an Electrical Maintenance and Operation Manager position. It summarizes his over 12 years of experience in electrical installations, maintenance, and commissioning across various industries. It also lists his education qualifications and additional skills like electrical panel design, maintenance, and testing.
megally CV 2016
Mohamed Megally is seeking a career in electrical engineering where he can develop his expertise. He has a bachelor's degree in electrical power and machines from Alexandria University. His graduation project and work experience involved electrical equipment installation, power distribution, home automation, lighting and HVAC system design, and medium and low voltage cable design. He has over 5 years of experience working on 110kV overhead transmission line and underground cable projects in Saudi Arabia. He is proficient in English, AutoCAD, Microsoft Office, and has training in PLCs, motor rewiring, and MATLAB.
CV Casper Mukobo
Casper Mukobo is an electrician seeking a position in electrical engineering. He has 8 years of experience working in mining, manufacturing, and railway industries. He holds several technical qualifications in electrical power engineering and high voltage switching. His most recent role is as a Concentrator Electrician at Unki Mine in Zimbabwe, where he has worked since 2015.
Elec Eng Karim CV
This document provides a summary of an electrical engineer's qualifications. It outlines the engineer's educational background which includes a BS in electrical power and machines engineering. It then lists work experience testing and commissioning electrical protection relays and equipment for various power plants and substations in Egypt and Saudi Arabia over the past 15 years. Finally, it outlines the engineer's extensive training experience in testing various electrical components, protection devices, and power generation technologies.
Alaa cv update
Alaa A. Alsadawi is an electrical field engineer with 9 years of experience working in the oil and gas industry in Iraq. He has a B.Sc. in Electrical Engineering and expertise in areas such as transformers, power generation, motors, switchgears, and control circuits. Currently he works as a team leader for a water disposal project as part of IGCC Co. which contracts with BP. Previously he held positions as Deputy Section Head of Electrical Maintenance at ZFOD and worked on installation, commissioning, and maintenance of electrical systems at SOC. He is proficient in Arabic, English, and Microsoft Office applications.
Eng Hisham CV
Hisham Okasheh Al-Zghoul is an electrical engineer with over 10 years of experience working on projects in Saudi Arabia, Jordan, and the UAE. He has technical and supervisory experience reviewing electrical shop drawings, coordinating between design disciplines, supervising installations, testing systems, and more. He holds a B.Sc. in Mechatronics Engineering and is a member of the Jordan Engineers Association.
Osama Atef Abd El Aty (1) new
This curriculum vitae summarizes Osama Atef's personal and professional experience. It includes his name, date of birth, address, education history, work experience testing and commissioning electrical equipment at power substations in Saudi Arabia and Egypt over the past 15 years, languages spoken, skills, contact information and references. He has extensive experience testing and maintaining high voltage switchgear, transformers, protection relays and other electrical infrastructure.
Mohamed_mohamed Mohamed ibrahim mohamed.jan 2015
Mohamed Ibrahim Mohamed Elmatboli is seeking a dynamic career opportunity where he can utilize his interpersonal, academic, and technical skills. He has over 9 years of experience in protection and control engineering, testing and commissioning substations and switchgear panels in Saudi Arabia and Egypt. His experience includes testing and commissioning 132kV and 13.8kV systems, protection relay testing, commissioning GIS bays, and performing high voltage testing.
Mohamed ElGazzar Egypt
This document is a resume for Mohamed Abdel Hamid El-Gazzar. It provides details about his contact information, objective, education, experience working as an electrical engineer in Egypt and Saudi Arabia, skills, training and qualifications. His experience includes over 6 years working on electrical power projects in Saudi Arabia as a senior team leader for testing and commissioning. He is seeking a new career opportunity in electrical power systems or machines.
My CV
Ahmed Fahmy Zaky is an electrical power engineer seeking a position in the corporate world. He has a bachelor's degree in electrical power engineering and machinery from Alexandria University. His work experience includes commissioning and testing engineering for United Engineer 2000 Company since 2015. Some of his projects include precommissioning tests on switchgears, installation and testing of gas insulated switchgears and power transformers, and high voltage cable laying. He has also completed several summer training programs and holds additional certifications in automatic control, PLCs, SCADA systems, and microcontrollers.
Similar to curriculum vitae (1) (20)
curriculum vitae (1)
- 1. Curriculum vitae FATHY ABDULRASHID ALI KOURA Electrical Power Engineer. 12 Years Experiences . Specialized in Power and Electrical Machines. Member of the Syndicate of Engineering’s in Egypt & K.S.A. PERSONAL DATA Name : Fathy Abdulrashid Ali Koura Gender : Male Date of Birth : 26/11/1979 Place of Birth : Almenoufia - Egypt Country of Nationality : Egyptian Religion : Muslim Original Address : Talia Village – Ashmoun Center – Almenoufia –Egypt . Current Address : Dammam City – Kingdom Of Saudi Arabia. Mobile Number : +966543067262 / +966599887150 / 00201220132442 /0020483300027 /0020483300669 Email : fathykoura@yahoo.com Marital Status : Married With children’s Military Status : Exempted EDUCATION University Degree : B.Sc. Electrical Power Engineer & Machine Department. Faculty : FACULTY OF ENGINEERING. DEPT. : Electrical Power & Electric Machines. University : Helwan University Year of Graduation : May 2003. Graduation Degree : GOOD – (72.48 %) . Faculty Project : [Universal Static Over Current Relay Protection on (M.V.T.Ls.)]. Project Degree : Excellent. Languages : Arabic: mother tongue English: good (written & spoken). WORK EXPERIENCES KEY Experience : I Have a vast Professional experience in my field . within my scope , I Have been Involved in a lot of Projects where I’m Participated in the Maintenance work for the Electrical Generators in a ( STEAM TURBINE POWER PLANTS ) , Medium / Low Voltages Equipments , supervision on All Electrical TESTS , and among many other tasks in different Projects . (6/2013 – TO DATE) I Transferred to work in ( K.S.A ) again in position a
- 2. ( PROJECT MANAGER) with ( SAUDI BIN LADEN GROUP ) in Operation & Maintenance Branches with ( MINISTRY OF INTERIOR " CENTRAL SECURITY BUILDINGS " ) in DAMMAM CITY . 6/2009 – 6/2013 Electrical Power Engineer – Egyptian Sugar Company – Egypt. Again Come back to my Original Sugar Company to Resume Carrying out the tasks that mentioned in fast statements down . (11/2008 – 5/2009) Electrical Engineer – RIYADH, Saudi Arabia (full time) . (AL FANAR TO ELECTRICAL SYSTEM COMPANY ) in Riyadh City ,In the (L.Vs. Switch Boards & Package Substations Factory), Specialized in QULITY CONTROL & Electrical Testing for Panels. (6/2008 – 10/2008) Consultant Engineer – NAJRAN, Saudi Arabia (full time). A Consultant in ( Ministry of Interior ) to Supervision upon Establishment of all Soldiers’ buildings. 2004/2008 Electrical Power Engineer – Egyptian Sugar Company – Egypt. Involved In Several Projects. Tasks Carried:- Electrical Maintenance work for electrical equipments. Maintenance , Testing , Repairing ,and Calibration works for Electrical parts of the Generators in a (STEAM TURBINE POWER PLANTS) operation and controller by a (SCADA SYSTEM) Medium Voltage Output (11 K.v.). Maintenance work to steep preventation and Control. Maintenance , and Testing works for all types of (M.V.C.Bs.), Protection Relays on (M.V. Switch Gears), (L.V.&M.V. Cables) , Power Factor Regulators (PFR). Supervision on all required works for (DISTRIBUTION TRANSFORMERS) Testing for OIL & INSULATIONS. Carrying out of all Testing , Measuring of Insulation resistances for Cable factors (DAR/DDA), Cable fault locations, and Earth resistance by using (MAGGER EARTH TESTER DEVICE) by follow A (3 rods/4 rods) Methods. Carrying out of all requirements for (MCCs) panels that’s used with the three phase INDUCTION MOTORS .
- 3. COURSES July, 2004 [Course in Programmable Logic Controller (P.L.C.)] – Silesian Institute “DON BOSCO “. November, 2007 [Course in POWER QUALITY] - Corporation of Egyptian Engineers. May, 2010 [Course in the field of Electrical Protections of Power System] - Cairo University. November, 2012 January 2013 [Course in Project Management Professional (PMP)] - Cairo University . [Course in PRIMAVERA (P6.1) ] – Cairo University. I Hope that my application meets with your requirements. Thank you”” Fathy Abdulrashid Ali Koura