This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section lists diagnostic codes and provides procedures for resolving common issues with the generator set control system, engine, and other components.
Cummins onan d6 r generator set qsb5 engine with the powercommand 1.1r contro...jfjskeksemmmd
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
Cummins onan c80 generator set qsb5 engine with the power command 1.1r contro...jfksekfmsme
This document is a service manual that provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes safety instructions, an introduction, specifications for various generator set models, maintenance schedules, troubleshooting codes and procedures, details on engine and generator components, and wiring diagrams.
Cummins onan c60 generator set qsb5 engine with the power command 1.1r contro...jfksekfmsme
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
Cummins onan c100 generator set qsb5 engine with the power command 1.1r contr...fjsexswkfkmsem
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
This document provides a table of flashcodes for fault memories for various vehicle systems, including ABS/ASR, running gear control, gearboxes, heating/air conditioning, engines, and other components. The table lists the manufacturer, flashcode blocks and values, procedures for reading and clearing fault memories, and troubleshooting information for each system.
This document provides a system description of the Electronically Controlled Air Suspension (ECAS) system for buses. ECAS is an electronically controlled air suspension system that offers improved ride comfort, constant vehicle height regardless of load, and kneeling functions compared to traditional mechanical suspension systems. The key components of ECAS include an electronic control unit, solenoid valves, distance sensors, and optional pressure sensors. Newer versions of ECAS use CAN bus technology to network electronic systems and transmit information via standardized identifiers. The document discusses the configuration, functions, components, diagnostics, parameter settings, and other technical aspects of the ECAS system.
This document provides flashcodes for fault memories for various vehicle systems, including ABS/ASR systems from Bosch, running gear controls, transmission systems, heating/air conditioning, engines, and other components. It includes tables of flashcodes for specific systems that indicate things like the control unit configuration, component faults, sensor issues, electrical problems, and other diagnostic information. The flashcodes are emitted in sets of lights or blocks during fault memory readings and can be cleared by pressing a request button for a certain duration while turning the ignition on.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
Cummins onan d6 r generator set qsb5 engine with the powercommand 1.1r contro...jfjskeksemmmd
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
Cummins onan c80 generator set qsb5 engine with the power command 1.1r contro...jfksekfmsme
This document is a service manual that provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes safety instructions, an introduction, specifications for various generator set models, maintenance schedules, troubleshooting codes and procedures, details on engine and generator components, and wiring diagrams.
Cummins onan c60 generator set qsb5 engine with the power command 1.1r contro...jfksekfmsme
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
Cummins onan c100 generator set qsb5 engine with the power command 1.1r contr...fjsexswkfkmsem
This document is a service manual that provides instructions for maintenance and troubleshooting of a generator set. It includes safety information and specifications for the generator set and engine. The troubleshooting section details various error codes that could occur, possible causes, and remedies. The manual aims to guide maintenance technicians in properly servicing the generator set.
This document provides a table of flashcodes for fault memories for various vehicle systems, including ABS/ASR, running gear control, gearboxes, heating/air conditioning, engines, and other components. The table lists the manufacturer, flashcode blocks and values, procedures for reading and clearing fault memories, and troubleshooting information for each system.
This document provides a system description of the Electronically Controlled Air Suspension (ECAS) system for buses. ECAS is an electronically controlled air suspension system that offers improved ride comfort, constant vehicle height regardless of load, and kneeling functions compared to traditional mechanical suspension systems. The key components of ECAS include an electronic control unit, solenoid valves, distance sensors, and optional pressure sensors. Newer versions of ECAS use CAN bus technology to network electronic systems and transmit information via standardized identifiers. The document discusses the configuration, functions, components, diagnostics, parameter settings, and other technical aspects of the ECAS system.
This document provides flashcodes for fault memories for various vehicle systems, including ABS/ASR systems from Bosch, running gear controls, transmission systems, heating/air conditioning, engines, and other components. It includes tables of flashcodes for specific systems that indicate things like the control unit configuration, component faults, sensor issues, electrical problems, and other diagnostic information. The flashcodes are emitted in sets of lights or blocks during fault memory readings and can be cleared by pressing a request button for a certain duration while turning the ignition on.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
Cummins onan d6 r generator set qsb5 engine with the powercommand 1.1r contro...fjkskefkemm
This service manual provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes important safety instructions and covers topics such as the engine control module, engine sensors, the J1939 CAN network, the air intake and cooling systems, and manufacturing facilities contact information. Wiring diagrams for the control panel, distribution panel, and generator sets are provided in the appendix.
Cummins onan c80 generator set qsb5 engine with the power command 1.1r contro...jjfkksmefm
This document is a service manual that provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes safety instructions, an introduction, specifications for various generator set models, maintenance schedules, troubleshooting codes and procedures, details on engine and generator components, and wiring diagrams.
This service workbook covers diagnosing and repairing issues with the EPIC engine management system. It provides:
1) A diagnostics procedure that involves inspecting for non-coded faults, examining coded fault codes, performing electrical testing and actuator tests, and making any necessary repairs.
2) Details on common non-coded faults like the warning lamp failing or unstable idle.
3) Troubleshooting guides for specific coded faults involving components like the pump rotor control, electric shut-off solenoid, and engine sensors.
4) Technical information sections with wiring diagrams, component locations, resistance values, and other reference details.
This document provides an overview of common rail diesel injection systems, including descriptions of key components and their operation. It discusses the supply pump, rail, injectors, control systems, diagnosis processes, and repair procedures. The supply pump pressurizes the fuel and supplies it to the high-pressure rail, which distributes it to the injectors. Electronic control modules precisely control fuel injection timing and quantity using inputs from sensors. Diagnostics involve checking codes, symptoms, and electrical circuits to isolate issues. Repair focuses on diagnosing specific systems or components causing malfunctions.
Toyota 8TB50 Pallet Truck Service Repair Manualuhjekm ioelpoe
This is the Highly Detailed factory service repair manual for theTOYOTA 8TB50 PALLET TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Safety
Systems Overview
Planned Maintenance
Troubleshooting
Messages and Codes
Component Procedures
Theory of Operation
Appendix
Index
Wire Diagrams
Parts Catalog
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document is a maintenance manual for the SP 3400 Series trucks produced by Crown Equipment Corporation. It contains safety information, procedures for maintenance and repair work, lubrication charts, and descriptions of truck components. The manual is intended exclusively for authorized service technicians and businesses. It must not be shared with or passed to third parties.
This document is the user's guide for the Anritsu Cell Master MT8212B integrated handheld multi-function base station test tool. It provides instructions for operating the various measurement modes and functions of the Cell Master including cable and antenna analysis, spectrum analysis, power measurement, transmission measurement, interference analysis, and testing of cellular standards. The document also covers preventative maintenance, calibration, and warranty and regulatory information.
Hyster n005 (h80 ft) forklift service repair manualjjfkksmefm
This document provides instructions for servicing a truck's cooling system. It describes how to check for exhaust leaks into the cooling system, water flow restrictions in the radiator, and inspect radiator hoses. It also details how to check the water pump and flush the entire cooling system. The procedure for removing the radiator is outlined, which involves draining the coolant, disconnecting hoses and electrical connections, and removing mounting brackets before taking out the radiator. Replacement instructions are also included.
Cummins onan power unit hqdpb hybrid quiet diesel power system service repair...jjfkksmefm
This document is a service manual for a hybrid quiet diesel power system that includes a power unit, primary inverter charger, secondary inverter charger, and transfer switch. It provides information on operating and maintaining the system, including pre-start checks, modes of operation, periodic maintenance schedules, and procedures for servicing components like the engine, inverter/charger, and transfer switch. The manual also covers topics like recommended fuels, oils, and operating in various climate conditions.
Cummins onan egmbg p3500 (spec a) generator service repair manualjjfkksmefm
This service manual provides instructions and specifications for portable generator sets models EGMBB P2400 and EGMBG P3500. The manual covers safety precautions, assembly, operation, maintenance, servicing, troubleshooting and wiring diagrams. It includes sections on the control panel, generator, engine, fuel and ignition systems, intake/exhaust and provides maintenance schedules and service checklists. Dimensional drawings and torque specifications are also included.
Cummins onan egmbe p5450ec 60 hz portable generator set service repair manualjjfkksmefm
The document is a service manual that provides safety, operational, and maintenance instructions for several portable generator models. It contains detailed sections on starting and running the generator, generator and engine components, specifications, troubleshooting, and maintenance procedures. The introduction identifies the generator models covered and their identification numbers. It also describes the standard wheel kit, fuel requirements, and assembly instructions.
Cummins onan egmbd, p5500 (spec a) generator service repair manualjjfkksmefm
This document is a service manual for portable generator sets models EGMBD P5500 (Spec A) and EGMBE P6500 (Spec A). It contains information about safety precautions, specifications, maintenance procedures, and repair instructions for the generator sets' components. The manual is organized into sections covering topics such as starting and running the generator sets, servicing procedures, control panel repair, engine repair, and fuel, ignition, and intake/exhaust system repair. It provides detailed instructions and diagrams to guide maintenance technicians in servicing and repairing issues with the generator sets.
Cummins onan dggd generator set with power command 2100 controller service re...jjfkksmefm
This document is a service manual that provides information about generator sets with PowerCommand 2100 controllers. It contains 10 sections that cover topics such as control operation, circuit boards, troubleshooting, power transfer control troubleshooting, control adjustment and service, servicing the generator, governors, fuel transfer pumps, and wiring diagrams. The manual provides technical specifications and instructions for maintenance and repair of the generator sets.
Cummins onan dgdk generator set with power command 2100 controller service re...jjfkksmefm
This service manual provides information for troubleshooting and servicing generator sets with PowerCommand 2100 controllers. It covers general operation of the controller and menus, circuit boards and modules, troubleshooting procedures, power transfer control troubleshooting, control adjustment and service procedures, servicing the generator, fuel transfer pump operation and wiring diagrams. The manual is intended to be used as a reference for technicians working on these generator sets.
Cummins onan dgdb generator set with power command 3100 controller service re...jjfkksmefm
This document is a service manual that provides information on servicing generator sets with PowerCommand 3100 controllers. It contains sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, fuel transfer pumps, and wiring diagrams. The manual provides safety instructions and describes the generator set components and how to test, maintain, and repair the system.
Cummins onan dgcg generator set with power command 2100 controller service re...jjfkksmefm
This service manual provides information for troubleshooting and servicing generator sets with PowerCommand 2100 controllers. It covers generator set models DGBB through DGFC with specifications A through V. The manual contains sections on control operation, circuit boards and modules, troubleshooting, power transfer control troubleshooting, control adjustment and service, servicing the generator, fuel transfer pump and control, and wiring diagrams. It is intended to assist technicians in maintaining and repairing these generator sets.
Cummins onan dgcc generator set with power command 3100 controller service re...jjfkksmefm
This document is a service manual that provides information on servicing and troubleshooting a generator set and its PowerCommand 3100 controller. It contains sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, and the fuel transfer pump and control. Safety instructions are provided at the beginning to warn technicians of hazards involving fuel, exhaust, moving parts, and electricity.
Cummins onan dfej generator set with power command 3201 controller service re...jjfkksmefm
This document is a service manual that provides information about generator sets with PowerCommand 3201 controllers. It contains sections that cover: an introduction and overview of the system; control operation and menus; circuit boards and modules; troubleshooting procedures; power transfer control troubleshooting; control adjustment and service procedures; servicing the generator; governors; fuel transfer pumps; and wiring diagrams. The manual provides technical specifications and instructions for servicing and repairing generator set components.
Cummins onan c300 d6 generator set with power command 1302 controller service...jjfkksmefm
This service manual provides instructions for servicing C275, C250, C300, C330, and C275 generator sets with PowerCommand 1302 controllers. It covers safety procedures, control operation, circuit board information, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and menu sequence diagrams. The manual instructs technicians on maintenance, repair, and testing of generator sets and controllers.
Cummins onan c140 d6 generator set with power command 1301 controller service...jjfkksmefm
This document is a service manual that provides instructions for servicing generator sets with PowerCommand 1301 controllers. It contains sections on control operation, circuit boards, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and safety guidelines. The manual provides information to service technicians on operating, maintaining, and repairing the generator sets and their components.
Cummins onan c70 d5 generator set with power command 1301 controller service ...jjfkksmefm
This document is a service manual that provides instructions for servicing generator sets with PowerCommand 1301 controllers. It contains sections on control operation, circuit boards, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and safety information. The manual provides detailed information on setup, testing, maintenance and repair of the generator sets and controllers.
1994 polaris 600 xcr snowmobile service repair manualjjfkksmefm
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model details are given for 1985 models including the Star, SS, Indy Trail, Indy 600, 600SE and LongTrack.
More Related Content
Similar to Cummins onan d6 r generator set qsb7 engine with the powercommand 1.1r controller service repair manual
Cummins onan d6 r generator set qsb5 engine with the powercommand 1.1r contro...fjkskefkemm
This service manual provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes important safety instructions and covers topics such as the engine control module, engine sensors, the J1939 CAN network, the air intake and cooling systems, and manufacturing facilities contact information. Wiring diagrams for the control panel, distribution panel, and generator sets are provided in the appendix.
Cummins onan c80 generator set qsb5 engine with the power command 1.1r contro...jjfkksmefm
This document is a service manual that provides specifications, maintenance schedules, troubleshooting procedures, and other technical information for Cummins generator sets with QSB5 engines and PowerCommand 1.1R controllers. It includes safety instructions, an introduction, specifications for various generator set models, maintenance schedules, troubleshooting codes and procedures, details on engine and generator components, and wiring diagrams.
This service workbook covers diagnosing and repairing issues with the EPIC engine management system. It provides:
1) A diagnostics procedure that involves inspecting for non-coded faults, examining coded fault codes, performing electrical testing and actuator tests, and making any necessary repairs.
2) Details on common non-coded faults like the warning lamp failing or unstable idle.
3) Troubleshooting guides for specific coded faults involving components like the pump rotor control, electric shut-off solenoid, and engine sensors.
4) Technical information sections with wiring diagrams, component locations, resistance values, and other reference details.
This document provides an overview of common rail diesel injection systems, including descriptions of key components and their operation. It discusses the supply pump, rail, injectors, control systems, diagnosis processes, and repair procedures. The supply pump pressurizes the fuel and supplies it to the high-pressure rail, which distributes it to the injectors. Electronic control modules precisely control fuel injection timing and quantity using inputs from sensors. Diagnostics involve checking codes, symptoms, and electrical circuits to isolate issues. Repair focuses on diagnosing specific systems or components causing malfunctions.
Toyota 8TB50 Pallet Truck Service Repair Manualuhjekm ioelpoe
This is the Highly Detailed factory service repair manual for theTOYOTA 8TB50 PALLET TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Safety
Systems Overview
Planned Maintenance
Troubleshooting
Messages and Codes
Component Procedures
Theory of Operation
Appendix
Index
Wire Diagrams
Parts Catalog
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document is a maintenance manual for the SP 3400 Series trucks produced by Crown Equipment Corporation. It contains safety information, procedures for maintenance and repair work, lubrication charts, and descriptions of truck components. The manual is intended exclusively for authorized service technicians and businesses. It must not be shared with or passed to third parties.
This document is the user's guide for the Anritsu Cell Master MT8212B integrated handheld multi-function base station test tool. It provides instructions for operating the various measurement modes and functions of the Cell Master including cable and antenna analysis, spectrum analysis, power measurement, transmission measurement, interference analysis, and testing of cellular standards. The document also covers preventative maintenance, calibration, and warranty and regulatory information.
Similar to Cummins onan d6 r generator set qsb7 engine with the powercommand 1.1r controller service repair manual (7)
Hyster n005 (h80 ft) forklift service repair manualjjfkksmefm
This document provides instructions for servicing a truck's cooling system. It describes how to check for exhaust leaks into the cooling system, water flow restrictions in the radiator, and inspect radiator hoses. It also details how to check the water pump and flush the entire cooling system. The procedure for removing the radiator is outlined, which involves draining the coolant, disconnecting hoses and electrical connections, and removing mounting brackets before taking out the radiator. Replacement instructions are also included.
Cummins onan power unit hqdpb hybrid quiet diesel power system service repair...jjfkksmefm
This document is a service manual for a hybrid quiet diesel power system that includes a power unit, primary inverter charger, secondary inverter charger, and transfer switch. It provides information on operating and maintaining the system, including pre-start checks, modes of operation, periodic maintenance schedules, and procedures for servicing components like the engine, inverter/charger, and transfer switch. The manual also covers topics like recommended fuels, oils, and operating in various climate conditions.
Cummins onan egmbg p3500 (spec a) generator service repair manualjjfkksmefm
This service manual provides instructions and specifications for portable generator sets models EGMBB P2400 and EGMBG P3500. The manual covers safety precautions, assembly, operation, maintenance, servicing, troubleshooting and wiring diagrams. It includes sections on the control panel, generator, engine, fuel and ignition systems, intake/exhaust and provides maintenance schedules and service checklists. Dimensional drawings and torque specifications are also included.
Cummins onan egmbe p5450ec 60 hz portable generator set service repair manualjjfkksmefm
The document is a service manual that provides safety, operational, and maintenance instructions for several portable generator models. It contains detailed sections on starting and running the generator, generator and engine components, specifications, troubleshooting, and maintenance procedures. The introduction identifies the generator models covered and their identification numbers. It also describes the standard wheel kit, fuel requirements, and assembly instructions.
Cummins onan egmbd, p5500 (spec a) generator service repair manualjjfkksmefm
This document is a service manual for portable generator sets models EGMBD P5500 (Spec A) and EGMBE P6500 (Spec A). It contains information about safety precautions, specifications, maintenance procedures, and repair instructions for the generator sets' components. The manual is organized into sections covering topics such as starting and running the generator sets, servicing procedures, control panel repair, engine repair, and fuel, ignition, and intake/exhaust system repair. It provides detailed instructions and diagrams to guide maintenance technicians in servicing and repairing issues with the generator sets.
Cummins onan dggd generator set with power command 2100 controller service re...jjfkksmefm
This document is a service manual that provides information about generator sets with PowerCommand 2100 controllers. It contains 10 sections that cover topics such as control operation, circuit boards, troubleshooting, power transfer control troubleshooting, control adjustment and service, servicing the generator, governors, fuel transfer pumps, and wiring diagrams. The manual provides technical specifications and instructions for maintenance and repair of the generator sets.
Cummins onan dgdk generator set with power command 2100 controller service re...jjfkksmefm
This service manual provides information for troubleshooting and servicing generator sets with PowerCommand 2100 controllers. It covers general operation of the controller and menus, circuit boards and modules, troubleshooting procedures, power transfer control troubleshooting, control adjustment and service procedures, servicing the generator, fuel transfer pump operation and wiring diagrams. The manual is intended to be used as a reference for technicians working on these generator sets.
Cummins onan dgdb generator set with power command 3100 controller service re...jjfkksmefm
This document is a service manual that provides information on servicing generator sets with PowerCommand 3100 controllers. It contains sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, fuel transfer pumps, and wiring diagrams. The manual provides safety instructions and describes the generator set components and how to test, maintain, and repair the system.
Cummins onan dgcg generator set with power command 2100 controller service re...jjfkksmefm
This service manual provides information for troubleshooting and servicing generator sets with PowerCommand 2100 controllers. It covers generator set models DGBB through DGFC with specifications A through V. The manual contains sections on control operation, circuit boards and modules, troubleshooting, power transfer control troubleshooting, control adjustment and service, servicing the generator, fuel transfer pump and control, and wiring diagrams. It is intended to assist technicians in maintaining and repairing these generator sets.
Cummins onan dgcc generator set with power command 3100 controller service re...jjfkksmefm
This document is a service manual that provides information on servicing and troubleshooting a generator set and its PowerCommand 3100 controller. It contains sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, and the fuel transfer pump and control. Safety instructions are provided at the beginning to warn technicians of hazards involving fuel, exhaust, moving parts, and electricity.
Cummins onan dfej generator set with power command 3201 controller service re...jjfkksmefm
This document is a service manual that provides information about generator sets with PowerCommand 3201 controllers. It contains sections that cover: an introduction and overview of the system; control operation and menus; circuit boards and modules; troubleshooting procedures; power transfer control troubleshooting; control adjustment and service procedures; servicing the generator; governors; fuel transfer pumps; and wiring diagrams. The manual provides technical specifications and instructions for servicing and repairing generator set components.
Cummins onan c300 d6 generator set with power command 1302 controller service...jjfkksmefm
This service manual provides instructions for servicing C275, C250, C300, C330, and C275 generator sets with PowerCommand 1302 controllers. It covers safety procedures, control operation, circuit board information, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and menu sequence diagrams. The manual instructs technicians on maintenance, repair, and testing of generator sets and controllers.
Cummins onan c140 d6 generator set with power command 1301 controller service...jjfkksmefm
This document is a service manual that provides instructions for servicing generator sets with PowerCommand 1301 controllers. It contains sections on control operation, circuit boards, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and safety guidelines. The manual provides information to service technicians on operating, maintaining, and repairing the generator sets and their components.
Cummins onan c70 d5 generator set with power command 1301 controller service ...jjfkksmefm
This document is a service manual that provides instructions for servicing generator sets with PowerCommand 1301 controllers. It contains sections on control operation, circuit boards, troubleshooting, control adjustment and service, servicing the generator, wiring diagrams, and safety information. The manual provides detailed information on setup, testing, maintenance and repair of the generator sets and controllers.
1994 polaris 600 xcr snowmobile service repair manualjjfkksmefm
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model details are given for 1985 models including the Star, SS, Indy Trail, Indy 600, 600SE and LongTrack.
Case tx140 telescopic handler service repair manualjjfkksmefm
This service manual provides information for repairing and maintaining TX130, TX140, and TX170 telescopic handlers. It includes sections covering the engine, powershift gearbox, front axle, and other components. Technicians can use this manual to find specifications, operation descriptions, repair instructions, and troubleshooting help for these machines.
Case ih magnum 310 tractor service repair manual [z8 rx06001 ]jjfkksmefm
This document is a service manual that provides information on servicing various systems for a line of Magnum tractor models. It includes sections covering distribution systems, power production, power train, travelling, body and structure, working arm, and introduction/safety information. The manual provides specifications, component locations, removal and installation instructions, and troubleshooting steps for maintenance and repairs.
Case 885 b dhp grader service repair manualjjfkksmefm
This document provides details about the engine components of 667TA engines used in various Case grader models. It describes the main components including the engine block, crankshaft, connecting rods, pistons, and cylinder head. The engine block is made of cast iron and houses the cylinders, main journals, camshaft bearing mounts, and mounts for other components. The crankshaft has main journals and passages for lubricating oil, and presses for various pulleys and gears. Connecting rods are forged steel with oblique big ends and marked caps. Pistons have a high turbulence combustion chamber and cooled underside crown.
Case 586 h tier 4 rough terrain forklift service repair manual (from pin ncc5...jjfkksmefm
The document provides instructions for removing the engine from a rough terrain forklift. Key steps include draining fluids, disconnecting hoses and wiring, removing guards and covers, and then using lifting equipment to detach the engine from the machine frame while maintaining clearance to avoid damage. Safety precautions are noted regarding the heavy weight of components and ensuring proper support during removal and installation.
Massey ferguson mf 1135 tractor service parts catalogue manualjjfkksmefm
The document provides a parts list and technical specifications for Massey Ferguson 1105/1135 tractors. It includes over 100 individual parts listed with part numbers, quantities, descriptions and other identifying information. The parts are organized into sections covering the cylinder block, crankshaft and flywheel, pistons/rings/rods, and cylinder head. The list provides replacement part numbers and notes for various engine components specific to different tractor models and years.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Cummins onan d6 r generator set qsb7 engine with the powercommand 1.1r controller service repair manual
1. Service Manual
Generator Set
QSB7 Engine with the PowerCommand®
1.1R Controller
C150 D6R (Spec A)
C200 D6R (Spec A)
English
3-2011 A031B238 (Issue 2)
Original Instructions
2. Table of Contents
1. IMPORTANT SAFETY INSTRUCTIONS ....................................................................................... 1
1.1 Warning, Caution and Note Styles Used In This Manual ....................................................... 1
1.2 General Information ................................................................................................................ 1
1.3 Generator Set Safety Code .................................................................................................... 2
1.4 Electrical Shock Can Cause Severe Personal Injury Or Death.............................................. 5
1.5 Fuel And Fumes Are Flammable............................................................................................ 6
1.6 Exhaust Gases Are Deadly..................................................................................................... 6
1.7 Earthing Rod Connection........................................................................................................ 7
1.8 Distribution Panel Door........................................................................................................... 7
1.9 Transport and Towing............................................................................................................. 8
1.10 Beware of Traffic Hazards .................................................................................................... 8
2. INTRODUCTION............................................................................................................................ 9
2.1 About This Manual.................................................................................................................. 9
2.2 Test Equipment....................................................................................................................... 9
2.3 Schedule of Abbreviations...................................................................................................... 9
2.4 Related Literature ................................................................................................................. 11
2.5 After Sales Services ............................................................................................................. 11
3. SPECIFICATIONS ....................................................................................................................... 13
3.1 Generator Set Specifications................................................................................................ 13
3.2 Engine Fuel Consumption (L/hr)........................................................................................... 13
4. PERIODIC MAINTENANCE......................................................................................................... 15
4.1 Periodic Maintenance Schedule ........................................................................................... 15
5. TROUBLESHOOTING ................................................................................................................. 19
5.1 Control System ..................................................................................................................... 19
5.2 Safety Considerations........................................................................................................... 19
5.3 InPower Service Tool............................................................................................................ 20
5.4 Network Applications and Customer Inputs.......................................................................... 20
5.5 Troubleshooting Procedures................................................................................................. 20
5.6 Engine Does Not Crank In Manual Mode (No Fault Message) ............................................ 21
5.7 Engine Does Not Crank In Remote Mode (No Fault Message) ........................................... 22
5.8 Code 118 − Fuel Pressure OOR High (Warning)................................................................. 22
5.9 Code 119 - Fuel Pressure Sensor OOR Low (Warning) ...................................................... 25
A031B238 (Issue 2) i
3. Table of Contents 3-2011
5.10 Code 121 − Loss of Speed Sense (Shutdown) .................................................................. 28
5.11 Code 135 - Oil Pressure Sensor OOR - High (Warning).................................................... 33
5.12 Code 141 - Oil Pressure Sensor OOR - Low (Warning)..................................................... 35
5.13 Code 143 - Engine Oil Pressure Low (Warning) ................................................................ 38
5.14 Code 144 – Engine Coolant Temperature OOR Low (Warning)........................................ 41
5.15 Code 145 – Engine Coolant Temperature OOR High (Warning) ....................................... 44
5.16 Code 146 - Engine Coolant Temperature Above Normal (Warning).................................. 46
5.17 Code 151 – Engine Coolant Temperature High (Shutdown).............................................. 49
5.18 Code 153 – Intake Manifold Temperature OOR High (Warning) ....................................... 51
5.19 Code 154 – Intake Manifold Temperature OOR Low (Warning) ........................................ 54
5.20 Code 155 – Intake Manifold Temperature High (Shutdown) .............................................. 56
5.21 Code 195 – Coolant Level Sensor OOR High (Warning)................................................... 58
5.22 Code 196 – Coolant Level Sensor OOR Low (Warning).................................................... 60
5.23 Code 197 – Coolant Level Low (Warning).......................................................................... 62
5.24 Code 234 – Engine Speed High (Shutdown)...................................................................... 62
5.25 Code 235 – Coolant Level Low (Shutdown)....................................................................... 64
5.26 Code 359 - Engine Failed to Start (Shutdown)................................................................... 65
5.27 Code 415 – Engine Oil Pressure Low (Shutdown)............................................................. 66
5.28 Code 421 – Engine Oil Temperature High (Warning) ........................................................ 69
5.29 Code 426 – J1939 Data Link Cannot Transmit .................................................................. 71
5.30 Code 436 – AUX 101 Intake Manifold Temperature ORR (Warning)................................. 72
5.31 Code 441 - Battery Voltage Low (Warning)........................................................................ 74
5.32 Code 442 - Battery Voltage High (Warning)....................................................................... 77
5.33 Code 488 – Intake Manifold Temperature High (Warning)................................................. 78
5.34 Code 659 − Change Fuel Filter (Warning) ......................................................................... 79
5.35 Code 689 − Engine Crankshaft Speed/Position Erratic (Warning)..................................... 80
5.36 Code 1117 − ECM Power Lost (Warning) .......................................................................... 85
5.37 Code 1246 − Unknown Engine Fault.................................................................................. 85
5.38 Code 1435 - Low Coolant Temperature (Warning) ............................................................ 86
5.39 Code 1438 − Fail to Crank (Shutdown).............................................................................. 87
5.40 Codes 1442 − Weak Battery (Warning).............................................................................. 88
5.41 Code 1446 − High AC Voltage (Shutdown)........................................................................ 89
5.42 Code 1447 − Low AC Voltage (Shutdown)......................................................................... 93
5.43 Code 1448 - Under Frequency (Shutdown)........................................................................ 94
5.44 Code 1449 - Over Frequency (Shutdown).......................................................................... 95
5.45 Code 1469 - Engine Speed Does Not Match Frequency (Shutdown)................................ 96
ii A031B238 (Issue 2)
4. 3-2011 Table of Contents
5.46 Code 1471 - High AC Current (Warning)............................................................................ 98
5.47 Code 1472 - High AC Current (Shutdown)......................................................................... 99
5.48 Code 1847 – Engine Coolant Temperature High (Shutdown with Cooldown) ................. 100
5.49 Code 1992 - Engine Crankshaft Speed Above Rated Speed (Warning).......................... 101
5.50 Code 2118 – Low Fuel Pressure (Warning) ..................................................................... 103
5.51 Code 2335 - Loss of AC Voltage Sensing (Shutdown) .................................................... 104
5.52 Code 2676 - Alternator Frequency Conflict (Shutdown)................................................... 105
5.53 Code 2677 - Failure To Stop (Shutdown)......................................................................... 105
5.54 Code 2678 - Charging Alternator Failure (Warning)......................................................... 106
5.55 Code 2696 - Alternator RTD Temperature High (Warning).............................................. 107
5.56 Code 2912 - Voltage Reconnection Switch Status Change (Shutdown).......................... 107
5.57 Code 3131 - Secondary Overspeed (Shutdown).............................................................. 108
6. ENGINE CONTROL MODULE (ECM)....................................................................................... 111
6.1 Keyswitch Control ............................................................................................................... 111
7. ENGINE SENSORS................................................................................................................... 113
7.1 Oil Pressure Sensor............................................................................................................ 114
7.2 Cylinder Head Temperature Sensor (CHT) ........................................................................ 114
7.3 Crankshaft Position Sensor (CKP) ..................................................................................... 114
7.4 Camshaft Position Sensor (CMP)....................................................................................... 114
8. SAE J1939 CAN (CONTROLLED AREA NETWORK) .............................................................. 115
8.1 CAN Datalink Signals ......................................................................................................... 115
8.2 Connections........................................................................................................................ 116
9. AIR INTAKE SYSTEM ............................................................................................................... 119
9.1 Air Cleaner.......................................................................................................................... 119
10. COOLING SYSTEM ................................................................................................................. 121
10.1 Cooling System Components ........................................................................................... 121
10.2 Radiator Information ........................................................................................................ 121
11. MANUFACTURING FACILITIES.............................................................................................. 127
11.1 How to Obtain Service...................................................................................................... 127
APPENDIX A. WIRING DIAGRAMS............................................................................................... 129
PC 1.1R Control Panel Wiring Diagram.................................................................................... 130
Distribution Panel Wiring Diagram ............................................................................................ 131
Upper Control Panel Wiring Diagram........................................................................................ 132
C150 D6R Generator Set Wiring Diagram................................................................................ 134
A031B238 (Issue 2) iii
5. Table of Contents 3-2011
C200 D6R Generator Set Wiring Diagram................................................................................ 135
iv A031B238 (Issue 2)
6. 1 Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be
followed during installation and maintenance of the generator set and batteries.
Safe and efficient operation can be achieved only if the equipment is properly operated
and maintained. Many accidents are caused by failure to follow fundamental rules and
precautions.
1.1 Warning, Caution and Note Styles Used In This
Manual
The following safety styles and symbols found throughout this manual indicate potentially
hazardous conditions to the operator, service personnel or the equipment.
DANGER: Warns of a hazard that will result in severe personal injury or death.
WARNING: Warns of a hazard that may result in severe personal injury or death.
CAUTION: Warns of a hazard or an unsafe practice that can result in product or property
damage.
NOTE: A short piece of text giving information that augments the current text.
1.2 General Information
This manual should form part of the documentation package supplied by Cummins Power
Generation with specific generator sets. In the event that this manual has been supplied in
isolation please contact your authorized distributor.
NOTE: It is in the Operator’s interest to read and understand all Warnings and
Cautions contained within the documentation relevant to the generator set,
its operation and daily maintenance.
1.2.1 General Safety Precautions
WARNING: Coolants under pressure have a higher boiling point than water. DO NOT
open a radiator or heat exchanger pressure cap while the engine is
running. Allow the generator set to cool and bleed the system pressure first.
To prevent severe scalding, let the engine cool down before removing the
coolant pressure cap. Turn the cap slowly, and do not open it fully until the
pressure has been relieved.
WARNING: Benzene and lead, found in some fuels, have been identified by some state
and federal agencies as causing cancer or reproductive toxicity. When
checking, draining or adding gasoline (if applicable to your product), take
care not to ingest, breathe the fumes, or contact gasoline.
WARNING: Used engine oils have been identified by some state or federal agencies as
causing cancer or reproductive toxicity. When checking or changing engine
oil, take care not to ingest, breathe the fumes, or contact used oil.
A031B238 (Issue 2) 1
7. 1. Important Safety Instructions 3-2011
NOTE: Keep multi-class ABC fire extinguishers handy. Class A fires involve ordinary
combustible materials such as wood and cloth; Class B fires involve
combustible and flammable liquid fuels and gaseous fuels; Class C fires
involve live electrical equipment. (ref. NFPA No. 10)
CAUTION: Make sure that rags are not left on or near the engine.
CAUTION: Make sure the generator set is mounted in a manner to prevent combustible
materials from accumulating under the unit.
CAUTION: Remove all unnecessary grease and oil from the unit. Accumulated grease and oil
can cause overheating and engine damage which present a potential fire hazard.
CAUTION: Keep the generator set and the surrounding area clean and free from obstructions.
Remove any debris from the set and keep the floor clean and dry.
WARNING: Do not work on this equipment when mentally or physically fatigued, or after
consuming any alcohol or drug that makes the operation of equipment
unsafe.
WARNING: Substances in exhaust gases have been identified by some state or federal
agencies as causing cancer or reproductive toxicity. Take care not to breath,
ingest, or come into contact with exhaust gases.
WARNING: Do not store any flammable liquids, such as fuel, cleaners, oil, etc., near the
generator set. A fire or explosion could result.
WARNING: Wear hearing protection when going near an operating generator set.
WARNING: To prevent serious burns, avoid contact with hot metal parts such as the
radiator, the turbo charger, and the exhaust system.
WARNING: Use personal protective equipment when maintaining or installing the
generator set. Examples of personal protective equipment include but are not
limited to: safety glasses, protective gloves, hard hats, steel-toed boots, and
protective clothing.
WARNING: Do not use starting fluids that evaporate. They are highly explosive.
CAUTION: Do not step on the generator set when entering or leaving the generator room.
Parts can bend or break leading to electrical shorts, or to fuel, coolant, or exhaust
leaks.
CAUTION: To prevent accidental or remote starting while working on the generator set,
disconnect the negative (-) battery cable at the battery.
WARNING: Ethylene glycol, used as engine coolant, is toxic to humans and animals.
Clean up spills and dispose of used engine coolant in accordance with local
environmental regulations.
WARNING: Moving parts can cause severe personal injury or death. Hot exhaust parts
can cause severe burns. Make sure all protective guards are properly in
place before starting the generator set.
1.3 Generator Set Safety Code
Before operating the generator set, read the manuals and become familiar with them and the
equipment. Safe and efficient operation can be achieved only if the equipment is properly
operated and maintained. Many accidents are caused by failure to follow fundamental rules
and precautions.
2 A031B238 (Issue 2)
8. 3-2011 1. Important Safety Instructions
WARNING: Improper operation and maintenance can lead to severe personal injury or
loss of life and property by fire, electrocution, mechanical breakdown, or
exhaust gas asphyxiation. Read and follow all Safety Precautions, Warnings
and Cautions throughout this manual and the documentation supplied with
your generator set.
WARNING: Lifting and repositioning of the generator set must only be carried out using
suitable lifting equipment, shackles, and spreader bars, in accordance with
local guidelines and legislation, by suitably trained and experienced
personnel. Incorrect lifting can result in severe personal injury, death and/or
equipment damage. For more information, contact your authorized
distributor.
1.3.1 Moving Parts Can Cause Severe Personal Injury Or Death
· Keep your hands, clothing, and jewelry away from moving parts.
· Before starting work on the generator set, disconnect the battery charger from its AC
source, then disconnect the starting batteries, negative (–) cable first. This will prevent
accidental starting.
· Make sure that fasteners on the generator set are secure. Tighten supports and clamps;
keep guards in position over fans, drive belts, etc.
· Do not wear loose clothing or jewelry in the vicinity of moving parts or while working on
electrical equipment. Loose clothing and jewelry can become caught in moving parts.
· If any adjustments must be made while the unit is running, use extreme caution around hot
manifolds, moving parts, etc.
1.3.2 Positioning of Generator Set
The area for positioning the set should be adequate and level and the area immediately around
the set must be free of any flammable material.
WARNING: On an enclosed generator set, the canopy doors must be locked before re-
positioning and they must remain locked during transportation and sitting.
1.3.3 Moving the Generator Set
WARNING: Transportation and handling of generator sets must only be undertaken by
suitably trained and experienced personnel.
It is essential that there are sufficient trained and experienced personnel in attendance to
ensure the lifting and transportation of the generator set is undertaken in a safe and appropriate
manner and in accordance to local guidelines and legislation.
WARNING: Do not lift the generator set by attaching to the engine or alternator lifting
points. Improper handling of the generator set may cause serious damage to
the generator set and its components and can result in severe personal
injury or death.
A031B238 (Issue 2) 3
9. 1. Important Safety Instructions 3-2011
Before lifting the generator set, lifting points, angle of slings, mass, access to intended site, and
the distance of movement should all be taken into account when organizing a suitable
crane/hoist. Consult the generator set information supplied with your generator set for details of
dimensions and mass.
· Ensure that the crane operating area is able to support the mass of the crane and the
generator set.
WARNING: Do not use the generator set as a means of access when attaching lifting
shackles, chains etc. Use as access may damage the generator set and/or
can result in severe personal injury or death.
WARNING: On an enclosed generator set, the canopy doors must be locked before re-
positioning and they must remain locked during transportation and sitting.
· Ensure the equipment used for lifting is adequate to support the weight of the generator
set.
· Attach the lifting device to the lifting points only, using suitable shackles, chains and
spreader bars.
· Slowly tighten the slings. Inspect the lifting attachments before commencing a full lift to
ensure they are attached correctly.
· Hoist the generator set slowly using the indicated lifting points only.
WARNING: Never stand underneath a lifted generator set. Contact with a lifted generator
set can result in severe personal injury or death.
· Guide the generator set with ropes at a safe distance, to prevent uncontrolled rotation
when positioning the generator set.
· Move the generator set to the desired location and place in position, bringing the set down
slowly.
· Loosen the slings; unhook and remove the shackles.
1.3.3.1 Positioning a Generator Set Using a Forklift Truck
WARNING: Transportation and handling of generator sets by forklift trucks must only be
undertaken by suitably trained and experienced personnel who are familiar
with the transport of these items.
If using a forklift truck to transport/position the generator set, the dimensions, mass, and route
must be taken into account when selecting an appropriate lifting truck.
WARNING: Do not attempt to lift a generator set with an undersized forklift truck.
Improper handling of the generator set may cause serious damage to the
generator set and its components and can result in severe personal injury or
death.
It is essential that there are sufficient trained and experienced personnel in attendance to
ensure the lifting and transportation of the generator set is undertaken in a safe and appropriate
manner and in accordance to local guidelines and legislation.
WARNING: A generator set must not be moved with a forklift truck if it is attached to the
trailer. Improper handling of the generator set may cause serious damage to
the generator set and its components and can result in severe personal
injury or death.
4 A031B238 (Issue 2)
10. 3-2011 1. Important Safety Instructions
WARNING: On an enclosed generator set, the canopy doors must be locked before re-
positioning and they must remain locked during transportation and sitting.
· Fully insert the arms of the forklift into the forklift pockets, making sure the generator set
completely rests on the forklift arms.
· Lift and handle the equipment slowly.
· Slowly set down the generator set in its final position.
1.4 Electrical Shock Can Cause Severe Personal Injury
Or Death
· Remove electric power before removing protective shields or touching electrical
equipment. Use rubber insulative mats placed on dry wood platforms over floors that are
metal or concrete when around electrical equipment. Do not wear damp clothing
(particularly wet shoes) or allow skin surface to be damp when handling electrical
equipment. Do not wear jewelry. Jewelry can short out electrical contacts and cause shock
or burning.
· Use extreme caution when working on electrical components. High voltages can cause
injury or death. DO NOT tamper with interlocks.
· Follow all applicable state and local electrical codes. Have all electrical installations
performed by a qualified licensed electrician. Tag and lock open switches to avoid
accidental closure.
· DO NOT CONNECT GENERATOR SET DIRECTLY TO ANY BUILDING ELECTRICAL
SYSTEM. Hazardous voltages can flow from the generator set into the utility line. This
creates a potential for electrocution or property damage. Connect only through an
approved isolation switch or an approved paralleling device.
1.4.1 AC Supply and Isolation
It is the sole responsibility of the customer to provide AC power conductors for connection to
load devices and the means to isolate the AC input to the terminal box; these must comply to
local electrical codes and regulations. Refer to the wiring diagram supplied with the generator
set.
NOTE: Local local electrical codes and regulations (for example BS EN 12601:2001)
may require the installation of a disconnect means for the generator set,
either on the generator set or where the generator set conductors enter a
facility.
NOTE: The AC supply must have the correct over current and earth fault protection
according to local electrical codes and regulations. This equipment must be
earthed (grounded).
The disconnecting device is not provided as part of the generator set, and Cummins Power
Generation accepts no responsibility for providing the means of isolation.
A031B238 (Issue 2) 5
11. 1. Important Safety Instructions 3-2011
1.5 Fuel And Fumes Are Flammable
Fire, explosion, and personal injury or death can result from improper practices.
· DO NOT fill fuel tanks while the engine is running, unless the tanks are outside the engine
compartment. Fuel contact with hot engine or exhaust is a potential fire hazard.
· DO NOT permit any flame, cigarette, pilot light, spark, arcing equipment, or other ignition
source near the generator set or fuel tank.
· Fuel lines must be adequately secured and free of leaks. Fuel connection at the engine
should be made with an approved flexible line. Do not use copper piping on flexible lines
as copper will become brittle if continuously vibrated or repeatedly bent.
· Be sure all fuel supplies have a positive shutoff valve.
· Be sure the battery area has been well-ventilated prior to servicing near it. Lead-acid
batteries emit a highly explosive hydrogen gas that can be ignited by arcing, sparking,
smoking, etc.
1.5.1 Spillage
Any spillage that occurs during fueling or during oil top-off or oil change must be cleaned up
before starting the generator set.
1.5.2 Fluid Containment
If fluid containment is incorporated into the bedframe, it must be inspected at regular intervals.
Any liquid present should be drained out and disposed of in line with local health and safety
regulations. Failure to perform this action may result in spillage of liquids which could
contaminate the surrounding area.
Any other fluid containment area must also be checked and emptied, as described above.
NOTE: Where spillage containment is not part of a Cummins supply, it is the
responsibility of the installer to provide the necessary containment to
prevent contamination of the environment, especially water courses/sources.
1.5.3 Do Not Operate in Flammable and Explosive Environments
Flammable vapor can cause an engine to overspeed and become difficult to stop, resulting in
possible fire, explosion, severe personal injury and death. Do not operate a generator set where
a flammable vapor environment can be created by fuel spill, leak, etc., unless the generator set
is equipped with an automatic safety device to block the air intake and stop the engine. The
owners and operators of the generator set are solely responsible for operating the generator set
safely. Contact your authorized Cummins Power Generation distributor for more information.
1.6 Exhaust Gases Are Deadly
· Provide an adequate exhaust system to properly expel discharged gases away from
enclosed or sheltered areas and areas where individuals are likely to congregate. Visually
and audibly inspect the exhaust daily for leaks per the maintenance schedule. Make sure
that exhaust manifolds are secured and not warped. Do not use exhaust gases to heat a
compartment.
· Be sure the unit is well ventilated.
6 A031B238 (Issue 2)
12. 3-2011 1. Important Safety Instructions
WARNING: Engine exhaust and some of its constituents are known to the state of
California to cause cancer, birth defects, and other reproductive harm.
1.6.1 Exhaust Precautions
WARNING: Exhaust pipes and charge air pipes are very hot and they can cause severe
personal injury or death from direct contact or from fire hazard.
WARNING: Hot exhaust gas can cause burns resulting in severe personal injury.
The exhaust outlet may be sited at the top or bottom of the generator set. Make sure that the
exhaust outlet is not obstructed. Personnel using this equipment must be made aware of the
exhaust position. Position the exhaust away from flammable materials - in the case of exhaust
outlets at the bottom, make sure that vegetation is removed from the vicinity of the exhaust.
WARNING: Inhalation of exhaust gases can result in serious personal injury or death. Be
sure deadly exhaust gas is piped outside and away from windows, doors, or
other inlets to buildings. Do not allow to accumulate in habitable areas.
WARNING: Contaminated insulation is a fire risk which can result in severe personal
injury.
The exhaust pipes may have some insulating covers fitted. If these covers become
contaminated by fuel or oil, they must be replaced before the generator set is run.
To minimize the risk of fire, make sure the following steps are observed:
· Make sure that the engine is allowed to cool thoroughly before topping off the oil or
draining the fuel filters.
· Clean the exhaust pipe thoroughly.
1.7 Earthing Rod Connection
Although this generator set may be supplied with an earthing rod, it may not be suitable for all
local conditions.
The neutral of the generator set may be required to be bonded to earth ground at the generator
location, or at a remote location depending on system design requirements. Consult the
engineering drawings for the facility or a qualified electrical design engineer for proper
installation.
NOTE: The end user is responsible for ensuring that an earthing arrangement that is
compliant with local conditions is established and tested before the
equipment is used.
1.8 Distribution Panel Door
CAUTION: Opening the distribution panel door while the generator set is running will trip the
generator set circuit breaker and abruptly shut off power to all loads. Be sure that
the generator set is not running and is in off mode before you open the distribution
panel door.
A031B238 (Issue 2) 7
13. 1. Important Safety Instructions 3-2011
1.9 Transport and Towing
The generator set is capable of being towed on the highway or off the highway. Consult state
and local transportation codes before transporting the generator set. When there are differences
between the instructions in this manual and the state and local traffic laws, the state and local
traffic laws take precedence.
Do the following to move or tow the generator set:
· Be sure the towing vehicle is adequate to tow and stop the generator set.
· Disconnect all wiring and cabling from the generator set.
· Disconnect the ground wire from the generator set.
WARNING: Failure to properly secure the trailer to the towing vehicle can result in
serious injory or death. Always use the proper trailer hitch and safety chains
to attach the trailer to the towing vehicle. Always obey all local and state
laws when towing a generator set.
· Use the front leveling jack to raise the trailer hitch enough to secure the hitch to the
vehicle. Be sure the hitch coupler is properly secured to the vehicle.
· Attach the safety chains to the vehicle.
· If included on the generator set, attach the breakaway chain on the surge brake and the
electrical coupler to the vehicle.
· Fully retract the front leveling jack.
· Check the trailer tires for proper inflation.
· Be sure the wheel lug nuts are tight.
· If included on the generator set, connect the electrical connector for the towing lights to the
vehicle.
CAUTION: Exceeding the recommended speeds can cause severe damage to the generator
set. Damage caused by exceeding the recommend speeds will void the
manufacturer's warranty.
· Tow at the posted speeds for trailers or the following, whichever is least:
· 60 mph (96 kph) on paved roads
· 10 mph (16 kph) on unpaved roads.
1.10 Beware of Traffic Hazards
· When the generator set is on or beside the road, be clear of traffic when starting, stopping,
or checking the generator set.
· Be sure there are no oil or fuel leaks that can spill onto the road.
· Be sure that all fasteners and mounting brackets are tight. Be sure that fasteners and
mounting brackets will not fall off during transit.
8 A031B238 (Issue 2)
14. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
15. 2 Introduction
2.1 About This Manual
This manual provides troubleshooting and repair information regarding the control and alternator
for the Generator Sets listed on the front cover. Engine service and maintenance instructions
are contained within the applicable engine service manual. Operating and basic maintenance
instructions are in the applicable Generator Set Operator Manual.
This manual does not include instructions for servicing printed circuit board assemblies. After
determining that a printed circuit board assembly is faulty, replace it. Do not repair it. Attempts
to repair a printed circuit board can lead to costly damage to the equipment.
This manual contains basic (generic) wiring diagrams and schematics that are included to help
in troubleshooting. The wiring diagrams and schematics that are maintained with the unit should
be updated when modifications are made to the unit.
Read Chapter 1 on page 1and carefully observe all instructions and precautions in this manual.
2.2 Test Equipment
To perform the test procedures in this manual, the following test equipment must be available
· True RMS meter for accurate measurement of small AC and DC voltages.
· Grounding wrist strap to prevent circuit board damage due to electrostatic discharge
(ESD).
· Battery Hydrometer
· Jumper Leads
· Tachometer or Frequency Meter
· Wheatstone Bridge or Digital Ohmmeter
· Variac
· Load Test Panel
· Load Bank
· Megger or Insulation Resistance Meter
· PCC Service Tool Kit (Harness Tool and Sensor Tool)
· InPower Service Tool (PC based Generator Set Service Tool)
· InSite Service Tool
2.3 Schedule of Abbreviations
This list is not exhaustive. For example, it does not identify units of measure or acronyms that
appear only in parameters, event/fault names, or part/accessory names.
AmpSentry and InPower are trademarks of Cummins Inc. PowerCommand is a registered
trademark of Cummins Inc.
A031B238 (Issue 2) 9
16. 2. Introduction 3-2011
ACRONYM DESCRIPTION ACRONYM DESCRIPTION
AC Alternating Current LED Light-emitting Diode
AMP AMP, Inc., part of Tyco Electronics Mil Std Military Standard
ASTM American Society for Testing and MMHG Millimeters of Mercury
Materials (ASTM International)
ATS Automatic Transfer Switch NC Not Connected
AVR Automatic Voltage Regulator NC Normally Closed
AWG American Wire Gauge NFPA National Fire Protection Agency
CAN Controlled Area Network NO Normally Open
CB Circuit Breaker NWF Network Failure
CE Conformité Européenne OEM Original Equipment Manufacturer
CFM Cubic Feet per Minute OOR Out of Range
CGT Cummins Generator Technologies OORH / ORH Out of Range High
CMM Cubic Meters per Minute OORL / ORL Out of Range Low
CT Current Transformer PSI Pounds per square inch
DC Direct Current PB Push Button
ECM Engine Control Module PC Personal Computer
ECS Engine Control System PCC PowerCommand®
Control
EMI Electromagnetic interference PGI Power Generation Interface
EN European Standard PGN Parameter Group Number
EPS Engine Protection System PI Proportional/Integral
E-Stop Emergency Stop PID Proportional/Integral/Derivative
FAE Full Authority Electronic PLC Programmable Logic Controller
FMI Failure Mode Identifier PMG Permanent Magnet Generator
FSO Fuel Shutoff PT Potential Transformer
Genset Generator Set PTC Power Transfer Control
GCP Generator Control Panel PWM Pulse-width Modulation
GND Ground RFI Radio Frequency Interference
HMI Human-machine Interface RH Relative Humidity
IC Integrated Circuit RMS Root Mean Square
INHG Inches of Mercury RTU Remote Terminal Unit
ISO International Organization for SAE Society of Automotive Engineers
Standardization
kPA kilo-Pascal SPN Suspect Parameter Number
LBNG Lean-burn Natural Gas SW_B+ Switched B+
LCD Liquid Crystal Display UL Underwriters Laboratories
LCL Low Coolant Level UPS Uninterruptible Power Supply
LCT Low Coolant Temperature
10 A031B238 (Issue 2)
17. 3-2011 2. Introduction
2.4 Related Literature
Before any attempt is made to operate the generator set, the operator should take time to read
all of the manuals supplied with the generator set, and to familiarize themselves with the
warnings and operating procedures.
CAUTION: A generator set must be operated and maintained properly if you are to expect safe
and reliable operation. The Operator manual includes a maintenance schedule and
a troubleshooting guide.
The relevant manuals appropriate to your generator set are also available. The documents
below are in English:
· Operator Manual for C150 D6R and C200 D6R (A031B237)
· Service Manual for C150 D6R and C200 D6R (A031B238)
· Standard Repair Times for C150 D6R and C200 D6R (A035D492)
· Controller Service Manual for PowerCommand®
1.1, 1.1R, and 1.2 (A034L440)
· Engine Owner Manual for QSB7 (961-0016)
· Alternator Service Manual for UC alternator (900-9901)
· Specification and Data Sheet (For engineering data specific to the generator set)
· Application Manual T-030, Liquid Cooled Generator Sets (For application information)
· Parts Manual for C150 D6R and C200 D6R (A032Y315)
· Recommended Spares List (RSL) for C150 D6R (A034L428)
· Recommended Spares List (RSL) for C200 D6R (A034L431)
· Warranty Manual (F1117-0002)
· Global Commercial Warranty Statement (A028U870)
Contact your authorized distributor for more information regarding related literature for this
product.
2.5 After Sales Services
We offer a full range of maintenance and warranty services.
2.5.1 Maintenance
WARNING: Incorrect service or parts replacement can result in severe personal injury,
death, and/or equipment damage. Service personnel must be trained and
experienced to perform electrical and/or mechanical service.
For customers who wish to have their generator sets expertly serviced at regular intervals your
local distributor offers a complete maintenance contract package. This covers all items subject
to routine maintenance and includes a detailed report on the condition of the generator set. In
addition, this can be linked to a 24-hour call-out arrangement, providing year-round assistance if
necessary. Specialist engineers are available to maintain optimum performance levels from
customer’s generator sets, and it is recommended that maintenance tasks are only undertaken
by trained and experienced technicians provided by your authorized distributor.
A031B238 (Issue 2) 11
18. 2. Introduction 3-2011
2.5.2 Warranty
For details of the warranty coverage for your generator set, refer to the Global Commercial
Warranty Statement (A028U870).
Extended warranty coverage is also available. In the event of a breakdown, prompt assistance
can normally be given by factory trained service technicians with facilities to undertake all minor
and many major repairs to equipment on site.
For further warranty details, contact your authorized distributor.
NOTE: Damage caused by failure to follow the correct coolant recommendations will
not be covered by the warranty. Please contact your authorized distributor.
2.5.2.1 Warranty Limitations
For details of the warranty limitations for your generator set, refer to the Warranty Statement
applicable to the generator set application.
12 A031B238 (Issue 2)
19. 3 Specifications
3.1 Generator Set Specifications
TABLE 1. SPECIFICATIONS
Models C150 D6R C200 D6R
Engine
Cummins Diesel Series QSB7-G3 QSB7-G5
Generator kW Rating See generator set nameplate for rating information.
Maximum Weight 9157 lb (4153 kg) 9593 lb (4351 kg)
With Fuel 7346 lb (3332 kg) 7782 lb (3529 kg)
Without Fuel
Idle Speed 700-900 RPM 700-900 RPM
Fuel Diesel Grade 2-D Diesel Grade 2-D
Exhaust
Backpressure (Maximum Allowed) 40.95 inch H2O (10.2 kPa) 40.958 inch H2O (10.2 kPa)
Electrical System
Starting Voltage 12 Volts DC 12 Volts DC
Battery Charging Alternator 100 A 100 A
(Maximum Rating)
Cooling System
Capacity (engine only) 2.7 Gallons (10.2 L) 2.7 Gallons (10.2 L)
Lubricating System
Oil Capacity with Filters 20 Quarts (18.9 L) 20 Quarts (18.9 L)
Battery
Ground Negative Negative
Required Battery Voltage 12 Volts DC 12 Volts DC
Group Number 31 31
CCA (Minimum) 1500
Cold Soak @ 0o
F (-18o
C) 1500
3.2 Engine Fuel Consumption (L/hr)
TABLE 2. FUEL CONSUMPTION AT 1800 RPM (60 HZ)
Model C150 D6R C200 D6R
Engine QSB7 QSB7
Engine Performance Data at 60Hz1
45.0 56.0
1. Full Load (Standby)
Refer to Data Sheets for other applications. In line with the CPG policy of continuous improvement, these figures are
subject to change.
A031B238 (Issue 2) 13