This document provides an overview of CTS Valves and their products and services. CTS Valves specializes in rapid valve design and manufacturing. They offer a wide range of isolation valves including ball, gate, globe, and check valves in various materials. They also provide custom valve designs, actuation solutions, project packaging, and related services. Their goal is to provide solutions for urgently needed non-stock valves with faster delivery times than traditional manufacturers.
The document discusses Endress+Hauser's Centre of Competence in Manchester, UK. It offers expertise in temperature, flow, and level measurement instrumentation, as well as panel solutions and mechanical design services. The Centre of Competence has decades of experience designing and manufacturing custom temperature assemblies and flow measurement devices. It provides complete solutions from standard and engineered products to expert services.
Flowserve Control Valve Product OverviewMathew Falcon
The document provides information on Flowserve's general service control valves and product offerings. It discusses general service control valve platforms that combine standardization, high performance, and simplified maintenance for lower total cost of ownership. Product lines featured include Valtek, Kämmer, and NAF valves in sizes from DN 15 to DN 2500 (0.5" to 100") for various pressure classes and temperature ranges. Applications highlighted are for industries like chemical, oil and gas, power generation, and others.
Australian Pipeline Valve (APV) manufactures a wide range of valves and pipeline products for oil and gas, mining, water treatment and other industries. It produces ball, check, gate, globe, plug and butterfly valves, as well as complementary products like actuators, gearboxes and strainers. APV valves are made to various international standards and are tested and certified to ensure quality and performance. The company aims to provide innovative valve designs with an emphasis on quality, safety, ease of use and long service life.
This document discusses KDV diaphragm valves, including their uses in various industries. KDV manufactures and distributes a wide range of industrial valves, specializing in diaphragm valves. Their valves feature corrosion and abrasion resistant materials and coatings, making them suitable for handling corrosive fluids. They are used extensively in industries like chemical processing, mining, water treatment, and others due to their low cost, easy maintenance, and long service life. The document provides specifications on valve components, materials, pressure and temperature ratings, and dimensions.
Cashco - Válvula de controle e reguladores sanitáriosRenan Sehn Santos
A Cashco possui uma linha de válvulas para o segmento sanitário.
A linha de produtos inclui: válvula de controle sanitária, regulador de pressão sanitária, regulador de contrapressão sanitária, controladores e válvulas de inertização sanitárias.
Cashco Inc. is a company with over 95 years of experience manufacturing pressure and temperature regulators, control valves, tank blanketing valves, conservation vents, and arrestors. It was founded in 1917 as A.W. Cash Company and has expanded through acquisitions of other valve companies. The document describes Cashco's history, facilities, product lines, and sales solutions for various applications. It provides information on Cashco's testing facilities, warehouse storage, and focus on serving customers' present and future needs through a wide range of valve products.
(https://www.indiamart.com/ksvalves) Owing to immense industry experience and knowledge, we have emerged as a renowned manufacturer, exporter and supplier of an assorted range of Industrial Valves, Strainer and PRV & PRDSH Station. These products are manufactured at our high-tech manufacturing unit in compliance with international quality standards using optimum quality components and advanced technology. Further, these products are known for smooth performance, rigid construction, corrosion resistance and longer service life.
High quality components and sub-assemblies such as: piping, valves, tubing, manifolds, assemblies, and systems are supplied to semiconductor toolmakers and meet the stringent demands of the semiconductor industry. Double packed and produced under cleanroom conditions.
Special features for the semiconductor industry include: minimal dead space in valves and fittings, minimal use of specific lubricants, cleaned and highly polished stainless steel, radial mounting, compression fittings, weld fittings, diaphragm valves, purifiers, mass flow controllers, pressure sensors, specific cleanroom solutions and more!
The document discusses Endress+Hauser's Centre of Competence in Manchester, UK. It offers expertise in temperature, flow, and level measurement instrumentation, as well as panel solutions and mechanical design services. The Centre of Competence has decades of experience designing and manufacturing custom temperature assemblies and flow measurement devices. It provides complete solutions from standard and engineered products to expert services.
Flowserve Control Valve Product OverviewMathew Falcon
The document provides information on Flowserve's general service control valves and product offerings. It discusses general service control valve platforms that combine standardization, high performance, and simplified maintenance for lower total cost of ownership. Product lines featured include Valtek, Kämmer, and NAF valves in sizes from DN 15 to DN 2500 (0.5" to 100") for various pressure classes and temperature ranges. Applications highlighted are for industries like chemical, oil and gas, power generation, and others.
Australian Pipeline Valve (APV) manufactures a wide range of valves and pipeline products for oil and gas, mining, water treatment and other industries. It produces ball, check, gate, globe, plug and butterfly valves, as well as complementary products like actuators, gearboxes and strainers. APV valves are made to various international standards and are tested and certified to ensure quality and performance. The company aims to provide innovative valve designs with an emphasis on quality, safety, ease of use and long service life.
This document discusses KDV diaphragm valves, including their uses in various industries. KDV manufactures and distributes a wide range of industrial valves, specializing in diaphragm valves. Their valves feature corrosion and abrasion resistant materials and coatings, making them suitable for handling corrosive fluids. They are used extensively in industries like chemical processing, mining, water treatment, and others due to their low cost, easy maintenance, and long service life. The document provides specifications on valve components, materials, pressure and temperature ratings, and dimensions.
Cashco - Válvula de controle e reguladores sanitáriosRenan Sehn Santos
A Cashco possui uma linha de válvulas para o segmento sanitário.
A linha de produtos inclui: válvula de controle sanitária, regulador de pressão sanitária, regulador de contrapressão sanitária, controladores e válvulas de inertização sanitárias.
Cashco Inc. is a company with over 95 years of experience manufacturing pressure and temperature regulators, control valves, tank blanketing valves, conservation vents, and arrestors. It was founded in 1917 as A.W. Cash Company and has expanded through acquisitions of other valve companies. The document describes Cashco's history, facilities, product lines, and sales solutions for various applications. It provides information on Cashco's testing facilities, warehouse storage, and focus on serving customers' present and future needs through a wide range of valve products.
(https://www.indiamart.com/ksvalves) Owing to immense industry experience and knowledge, we have emerged as a renowned manufacturer, exporter and supplier of an assorted range of Industrial Valves, Strainer and PRV & PRDSH Station. These products are manufactured at our high-tech manufacturing unit in compliance with international quality standards using optimum quality components and advanced technology. Further, these products are known for smooth performance, rigid construction, corrosion resistance and longer service life.
High quality components and sub-assemblies such as: piping, valves, tubing, manifolds, assemblies, and systems are supplied to semiconductor toolmakers and meet the stringent demands of the semiconductor industry. Double packed and produced under cleanroom conditions.
Special features for the semiconductor industry include: minimal dead space in valves and fittings, minimal use of specific lubricants, cleaned and highly polished stainless steel, radial mounting, compression fittings, weld fittings, diaphragm valves, purifiers, mass flow controllers, pressure sensors, specific cleanroom solutions and more!
The Jindex Pinch Valve range has been designed to solve process problems associated with controlling the flow of abrasive or corrosive fluids. Industries such as mineral processing, pulp and paper, power generation, chemical handling, effluent treatment, water and waste water use the Jindex Pinch Valve.
This document discusses Caterpillar's hydraulic hose solutions for mining equipment, highlighting 5 reasons to choose Cat hose assemblies: 1) Unrivaled expertise from decades of experience manufacturing hoses, 2) Rugged hose designs engineered to exceed standards, 3) Meticulous manufacturing to exact specifications, 4) A safety mindset through rigorous testing, and 5) Unmatched support from dealer technicians trained in installation.
A Cashco possui uma linha completa de reguladores de pressão industrial. A linha inclui: reguladores de redução de pressão e reguladores de contrapressão.
EHL Group is an engineering company that provides innovative solutions and services to a variety of industries globally. They have expertise in motion control, fluid technology, instrumentation, automation, electrical engineering, and technical services. EHL can design, manufacture, service, and maintain complex systems, with capabilities like specialized engineering, fabrication, testing, and calibration. Their goal is to provide customized solutions and support for customers' engineering challenges.
1407_A study in solutions_Hydrocarbon Engineering_November 2016Julie Bodine, MBA
The oil and gas industry faces challenges around emissions, safety, and regulations that require high performance valves. Case studies show how innovative valve solutions from ValvTechnologies address these issues. A Canadian refinery's plug valves were failing in the delayed coker process; testing a ValvTechnologies plug valve with a purge system showed improved performance. NatureWorks needed a valve for a severe service application; a custom ValvTechnologies valve met specifications and provided tight shut-off. In an emergency, ValvTechnologies assembled a team to quickly supply a replacement valve, avoiding plant downtime. ValvTechnologies also provides repair and maintenance to support industry valves throughout their lifespan.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Lalit Engineers is a leading manufacturer and supplier of pressure vessels, separator tanks, storage tanks, and other fabricated metal products based in Ahmedabad, India. They offer a wide range of products including air receivers, pressure vessels, storage tanks, control panels, and more. The company was established in 2000 and has over 26 employees with expertise in manufacturing, quality testing, sales, and other functions. They utilize advanced machinery and technologies to serve customers across India.
HEVAL is a manufacturer of high quality steel castings located in Zhejiang, China. It produces over 10,000 tons of castings annually in carbon steel, low alloy steel, stainless steel, duplex steel, and super critical steel up to 10 tons per casting. HEVAL has strong technical capabilities in casting design, quality control, and applications for industries like nuclear power, petrochemical, and thermal power. It aims to be a first-class casting brand through innovation and creating value for customers.
HVL Solutions provides cost-effective solutions for valve and pipeline problems in various industries. They offer a range of services to support maintenance, assessment, and repair of oil, gas, and water networks. This includes valve release techniques, refurbishment, packing, bursting and leak repairs, gearbox repairs, penstock repairs, repair collars, cutting pipes, hot tapping, camera inspections, valve flushing and greasing, excavations, and other civil engineering services. Their goal is to help maintain network capacity, efficiency, and service through innovative solutions.
Special Plants for N2, O2 and Instrument Air from NOXERIOROscar de Groen
NOXERIOR focuses on producing dry compressed air and separating nitrogen and oxygen on-site using either pressure swing adsorption (PSA) or hollow-fibre membrane technology. Their modular PSA generators and membrane systems are used for instrument air, nitrogen, and oxygen generation in oil/gas, mining, and power industries. NOXERIOR aims to establish long-term relationships with customers based on quality, reliability, and on-time project delivery.
VEGA Pressure & Level Measurement - Petrochemical Industry ApplicationsThorne & Derrick UK
This document discusses level, pressure, and switching measurement solutions from VEGA for the petrochemical industry. It describes applications for measuring crude oil pipelines, distillation columns, condensation vessels, liquefied gases, and more. VEGA's plics modular system allows customizing sensors, fittings, electronics, and housings to meet technical and economic demands. Measurement technologies discussed include radar, guided microwave, vibration, and pressure transmitters.
Fittings & Valves For Instrumentation, Hydraulic & Pneumatic ApplicationsVishakhaTalmale
This document provides information on fittings and valves for instrumentation, hydraulic, and pneumatic applications manufactured by Sealexcel (India) Pvt. Ltd. It discusses the company's expertise in manufacturing high quality products to stringent standards over three decades. The document includes specifications for various compression tube fittings, precision pipe fittings, ball valves, and test certifications to verify product quality and reliability.
Discover the ranges of cutting fluids, industry 4.0 fluid management systems and mist extraction products and services offered by UK manufacturer Jemtech
Parker Hannifin Corporation provides a wide range of solenoid valves for industrial applications including 2-way, 3-way, and 4-way valves. The document discusses their valve product lines and customization capabilities. It emphasizes Parker's ability to meet diverse customer needs through both standard and customized solutions.
SDS is an engineering company that provides drilling and grouting solutions as a partner through turn-key services. They operate as a supplier of drilling and grouting machines and equipment, a contractor for projects, and a consultant for designing projects. SDS has specialized teams with experience on different international projects. They aim to support customers in their projects as a solution partner.
This document provides an overview of an industrial services company called Team. It offers various specialized industrial services including leak repair, hot tapping, field machining, technical bolting, valve repair, and more. It operates over 115 locations worldwide and serves industries such as chemical, aerospace, automotive, government, steel, power generation, and others. The company was founded in 1973 and went public in 1980, and has over 3,500 trained technicians. It aims to provide quality, safety, and service for its industrial clients.
Debris / Junk Catcher Manifold is designed to remove drilling, formation and proppant based debris / junk from the wellbore fluids to minimize the potential damage.
ATV S.p.A. is an Italian company specializing in the design and manufacturing of valves for the oil and gas industry. It maintains certifications including ISO 9001 and API certifications. The company can provide valves in a wide range of materials to meet industry standards and customer needs. ATV has extensive research and testing facilities and expertise in materials, coatings, and sealing technologies to support the development and qualification of valves, including for subsea and high-pressure applications.
This document provides information on LESER's flanged safety relief valves for critical service applications. It describes the Series 447, 546, and 449 valve types, which feature polytetrafluoroethylene (PTFE) lining to provide optimal and permanent corrosion protection for chemical applications. The document outlines the valve product ranges, materials, configurations, specifications, and applications.
Orseal Customised Solution Profile A4 Single PageAlexander Gibson
Orseal provides custom flow control solutions and valve products for a wide range of industries. They offer consulting, custom design, manufacturing, and turnkey projects based on over 50 years of valve experience. Their approach involves understanding customer needs and delivering optimum solutions on time and on budget while also providing a total spares support program through their unique product logging system.
Suppliers of Union And Union Tee, Needle Valves Straight Type, Needle Valves Straight Block Bleed Type, Round Body Design Ball Valves, Square Body Design Ball Valves.
Manufacturer and Exporter of Union, Union Tee, Male Elbows, Back Ferrule, Needle Valve, Needle Valves Straight Type, Needle Valves Straight Block Bleed Type, Needle Valves Angle Type, 2 way Manifold, 3 way Manifold, High Pressure Up To 7500 PSI.
The Jindex Pinch Valve range has been designed to solve process problems associated with controlling the flow of abrasive or corrosive fluids. Industries such as mineral processing, pulp and paper, power generation, chemical handling, effluent treatment, water and waste water use the Jindex Pinch Valve.
This document discusses Caterpillar's hydraulic hose solutions for mining equipment, highlighting 5 reasons to choose Cat hose assemblies: 1) Unrivaled expertise from decades of experience manufacturing hoses, 2) Rugged hose designs engineered to exceed standards, 3) Meticulous manufacturing to exact specifications, 4) A safety mindset through rigorous testing, and 5) Unmatched support from dealer technicians trained in installation.
A Cashco possui uma linha completa de reguladores de pressão industrial. A linha inclui: reguladores de redução de pressão e reguladores de contrapressão.
EHL Group is an engineering company that provides innovative solutions and services to a variety of industries globally. They have expertise in motion control, fluid technology, instrumentation, automation, electrical engineering, and technical services. EHL can design, manufacture, service, and maintain complex systems, with capabilities like specialized engineering, fabrication, testing, and calibration. Their goal is to provide customized solutions and support for customers' engineering challenges.
1407_A study in solutions_Hydrocarbon Engineering_November 2016Julie Bodine, MBA
The oil and gas industry faces challenges around emissions, safety, and regulations that require high performance valves. Case studies show how innovative valve solutions from ValvTechnologies address these issues. A Canadian refinery's plug valves were failing in the delayed coker process; testing a ValvTechnologies plug valve with a purge system showed improved performance. NatureWorks needed a valve for a severe service application; a custom ValvTechnologies valve met specifications and provided tight shut-off. In an emergency, ValvTechnologies assembled a team to quickly supply a replacement valve, avoiding plant downtime. ValvTechnologies also provides repair and maintenance to support industry valves throughout their lifespan.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Lalit Engineers is a leading manufacturer and supplier of pressure vessels, separator tanks, storage tanks, and other fabricated metal products based in Ahmedabad, India. They offer a wide range of products including air receivers, pressure vessels, storage tanks, control panels, and more. The company was established in 2000 and has over 26 employees with expertise in manufacturing, quality testing, sales, and other functions. They utilize advanced machinery and technologies to serve customers across India.
HEVAL is a manufacturer of high quality steel castings located in Zhejiang, China. It produces over 10,000 tons of castings annually in carbon steel, low alloy steel, stainless steel, duplex steel, and super critical steel up to 10 tons per casting. HEVAL has strong technical capabilities in casting design, quality control, and applications for industries like nuclear power, petrochemical, and thermal power. It aims to be a first-class casting brand through innovation and creating value for customers.
HVL Solutions provides cost-effective solutions for valve and pipeline problems in various industries. They offer a range of services to support maintenance, assessment, and repair of oil, gas, and water networks. This includes valve release techniques, refurbishment, packing, bursting and leak repairs, gearbox repairs, penstock repairs, repair collars, cutting pipes, hot tapping, camera inspections, valve flushing and greasing, excavations, and other civil engineering services. Their goal is to help maintain network capacity, efficiency, and service through innovative solutions.
Special Plants for N2, O2 and Instrument Air from NOXERIOROscar de Groen
NOXERIOR focuses on producing dry compressed air and separating nitrogen and oxygen on-site using either pressure swing adsorption (PSA) or hollow-fibre membrane technology. Their modular PSA generators and membrane systems are used for instrument air, nitrogen, and oxygen generation in oil/gas, mining, and power industries. NOXERIOR aims to establish long-term relationships with customers based on quality, reliability, and on-time project delivery.
VEGA Pressure & Level Measurement - Petrochemical Industry ApplicationsThorne & Derrick UK
This document discusses level, pressure, and switching measurement solutions from VEGA for the petrochemical industry. It describes applications for measuring crude oil pipelines, distillation columns, condensation vessels, liquefied gases, and more. VEGA's plics modular system allows customizing sensors, fittings, electronics, and housings to meet technical and economic demands. Measurement technologies discussed include radar, guided microwave, vibration, and pressure transmitters.
Fittings & Valves For Instrumentation, Hydraulic & Pneumatic ApplicationsVishakhaTalmale
This document provides information on fittings and valves for instrumentation, hydraulic, and pneumatic applications manufactured by Sealexcel (India) Pvt. Ltd. It discusses the company's expertise in manufacturing high quality products to stringent standards over three decades. The document includes specifications for various compression tube fittings, precision pipe fittings, ball valves, and test certifications to verify product quality and reliability.
Discover the ranges of cutting fluids, industry 4.0 fluid management systems and mist extraction products and services offered by UK manufacturer Jemtech
Parker Hannifin Corporation provides a wide range of solenoid valves for industrial applications including 2-way, 3-way, and 4-way valves. The document discusses their valve product lines and customization capabilities. It emphasizes Parker's ability to meet diverse customer needs through both standard and customized solutions.
SDS is an engineering company that provides drilling and grouting solutions as a partner through turn-key services. They operate as a supplier of drilling and grouting machines and equipment, a contractor for projects, and a consultant for designing projects. SDS has specialized teams with experience on different international projects. They aim to support customers in their projects as a solution partner.
This document provides an overview of an industrial services company called Team. It offers various specialized industrial services including leak repair, hot tapping, field machining, technical bolting, valve repair, and more. It operates over 115 locations worldwide and serves industries such as chemical, aerospace, automotive, government, steel, power generation, and others. The company was founded in 1973 and went public in 1980, and has over 3,500 trained technicians. It aims to provide quality, safety, and service for its industrial clients.
Debris / Junk Catcher Manifold is designed to remove drilling, formation and proppant based debris / junk from the wellbore fluids to minimize the potential damage.
ATV S.p.A. is an Italian company specializing in the design and manufacturing of valves for the oil and gas industry. It maintains certifications including ISO 9001 and API certifications. The company can provide valves in a wide range of materials to meet industry standards and customer needs. ATV has extensive research and testing facilities and expertise in materials, coatings, and sealing technologies to support the development and qualification of valves, including for subsea and high-pressure applications.
This document provides information on LESER's flanged safety relief valves for critical service applications. It describes the Series 447, 546, and 449 valve types, which feature polytetrafluoroethylene (PTFE) lining to provide optimal and permanent corrosion protection for chemical applications. The document outlines the valve product ranges, materials, configurations, specifications, and applications.
Orseal Customised Solution Profile A4 Single PageAlexander Gibson
Orseal provides custom flow control solutions and valve products for a wide range of industries. They offer consulting, custom design, manufacturing, and turnkey projects based on over 50 years of valve experience. Their approach involves understanding customer needs and delivering optimum solutions on time and on budget while also providing a total spares support program through their unique product logging system.
Suppliers of Union And Union Tee, Needle Valves Straight Type, Needle Valves Straight Block Bleed Type, Round Body Design Ball Valves, Square Body Design Ball Valves.
Manufacturer and Exporter of Union, Union Tee, Male Elbows, Back Ferrule, Needle Valve, Needle Valves Straight Type, Needle Valves Straight Block Bleed Type, Needle Valves Angle Type, 2 way Manifold, 3 way Manifold, High Pressure Up To 7500 PSI.
Maverick Valves BV is a Dutch manufacturer and global supplier of valves for industrial applications. They specialize in standard and customized valves for oil & gas, chemical, and petrochemical industries. Maverick Valves produces valves in-house at their state-of-the-art facility in Schiedam, Netherlands, where they can design, engineer, manufacture, test, and package valves according to customer specifications. Their dedicated teams and integrated quality management system allow them to reliably meet customer needs and industry standards.
ASCO provides solenoid valves, actuator control systems, pneumatic actuators, and other products for applications in the oil and gas industries. With over 100 years of experience, global presence, and expertise in hazardous areas, ASCO can deliver integrated automation solutions to meet the challenges of these industries. Their reliable and rugged products are well-suited for critical safety applications worldwide.
METALFAB provides engineering, fabrication, and contracting services including the design, finite element analysis, procurement, and manufacturing of pressure vessels, reactors, towers, and other process modules using advanced welding technologies. They perform post-weld heat treatment and testing in-house to deliver high quality equipment on schedule. METALFAB also offers chemical injection packages, launcher and receivers, shutdown and maintenance services, metering skids, manifold skids, and custom process skids.
JLX VALVE is a Spanish company that specializes in designing and manufacturing industrial valves. They have over 15 years of worldwide experience and are recognized internationally as a solid and competent company. JLX VALVE aims to offer excellent quality products and flawless customer service, while pursuing socially responsible practices like maintaining a pleasant work environment.
Fluid Automation Solutions for Beverage Bottling & Packaging - Brochure Thorne & Derrick UK
ASCO Numatics provides fluid control and fluid power solutions for beverage bottling and packaging processes. They offer a wide range of products including solenoid valves, pneumatic actuators, valve islands, filters and more. Their new G3 fieldbus platform offers flexibility with intuitive controls. ASCO Numatics products are designed for reliability and to reduce costs through easier installation and maintenance. They aim to be a one-stop shop for all fluid automation needs in bottling and packaging lines.
Flowserve Control Valve Product Guide (Valtek, Kammer)Swanson Flo
Flowserve general service control valves combine platform standardization, high performance, and simplified maintenance to deliver a lower total cost of ownership.
Flowserve delivers a broad range of general service control valves – linear and rotary – with pressure ratings of ANSI Class 150 to 4500/PN 10 to PN 640. These high-performance control valves offer greater reliability, precision control, and flow capacity, with significantly reduced cavitation, flashing, and noise. Quality production ensures increased process yield and throughput.
Because Flowserve general service control valves are constructed on global platforms using standardized parts and components, up-front engineering is held to a minimum. Simplified operation, maintenance, and service further ensure lower total cost of ownership.
Metso Neles Flow Control Solutions: Valves, Actuation, and AutomationMead O'Brien, Inc.
Neles Controls, a unit of Metso Automation, is a manufacturer of high quality rotary control valves, on/off valves, actuators & positioners, emergency shutdown valves (ESD), digital valve position control products, and severe service specialty valve products.
RTK is a specialist in control valves and actuators, offering high-quality products made in Germany. It has over 40 years of experience in control technology applications. RTK sees itself not just as a valve seller but as a control engineer, and offers a wide range of valves, actuators, sensors and electronic components. It prioritizes the competence of its employees to maintain long-standing customer relationships built on trust, competence and reliability.
Fabri-Tek Engineers manufactures and supplies process equipment and customized fabricated components. The company designs, manufactures, and supplies pressure vessels, process equipment, and custom fabrication. It aims to deliver high quality products that meet global standards and customer satisfaction. Fabri-Tek Engineers reviews and improves its quality management system to enhance effectiveness. The company manufactures a wide range of equipment for industries such as chemical, food, and pharmaceutical, including heat exchangers, distillation columns, and storage tanks.
Aegis Flow Technologies provides innovative valve solutions to address challenging corrosive process conditions in the chemical industry. It was founded on principles of customer innovation, safety, and service. Aegis offers a comprehensive portfolio of valve products including lined valves, safety relief valves, control valves, and more. It prides itself on over 100 years of combined industry experience, ISO quality certification, and 24/7 technical support.
bellowseal gate globe diveter, rotary angle three way blush bottom valves EQUIPTECH2014
SG make are in the field manufacturing high quality Bellow Seal Gate and Globe Valves since 2010 for applications such as Thermic Fluid, Steam, Chlorine, Hydrogen, Butadiene etc. These valves are available in sizes ranging from ½” NB to 14” NB in various material and Class construction ,we also do repairing of Bellow seal valves of any make
Flex-Valve, is a brand under General Rubber Corp. representing a state of the art line of pinch valves, pressure isolation rings and duck bill check valves. Flex-Valve has become a worldwide recognized brand and leading manufacturer in the industry
Abacus Valves International is a UK-based manufacturer of wafer check valves that has been in business for over 25 years. It produces a wide range of precision-engineered check valves for various industries such as oil and gas, water and utilities, and pharmaceuticals. Abacus operates as part of the Glen Foundry Group along with two partner companies, Anderson Stewart Castings and Precision Tooling Services, which provide investment castings and machined components respectively.
Hydratech Industries designs and manufactures hydraulic cylinders and accumulators for motion compensation applications in offshore oil and gas industries. They specialize in custom cylinders from concept to completion, with bores up to 30 inches and strokes up to 60 feet. Hydratech focuses on quality, safety, and meeting customers' specific needs through innovative sealing and surface technologies to protect cylinders in harsh marine environments.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 4000 bar and temperatures from minus 269 degrees C to plus 400 degrees C. Body materials include all common stainless steels, in addition to plastics and exotic alloys.
Flowserve Valves - Kammer Control ValvesSwanson Flo
FLOWSERVE Kämmer manufactures special application and general service control
valves and actuators, which are used extensively in the chemical, petrochemical, power, petroleum, pulp & paper, pharmaceutical, food processing and cryogenic industries.
FLOWSERVE Kämmer pneumatic actuators are widely known for their versatile diaphragm design, easy installation and simplified maintenance. When compared to other manufacturers’ diaphragm actuator designs, Kämmer actuators have much higher thrust capabilities, feature a very compact design and are lighter in weight. They also feature a field reversible design that requires no additional
parts.
Borsig ValveTech GmbH designs and manufactures high-pressure control valves, shut-off valves, compressor valves and parts for extreme operating conditions. It offers a comprehensive range of ball valves, control valves, isolation valves, compressor parts and valve services. The company specializes in valves for gas compressor and storage stations using customized materials to achieve optimal performance under high pressures and temperatures.
Similar to CTS_Valves_Corporate_Brochure 2016 (20)
5. CTS VALVES | CORPORATE BROCHURE 5
OUR PROPOSITION
From our well-equipped premises in The Netherlands we
offer you a wide range of services. Our rapid valve design &
manufacturing (RDM) program will provide you with a solution
for any urgently required high-end non-commodity valves that
you are urgently looking for but cannot be found within the
required time frame. Our RDM program offers manufacturing
and delivery times which are roughly half or less of those of
traditional manufacturers.
Our flexible R&D and engineering services allow us to offer
consultancy and bespoke valve design services to suit your
specific application, site envelop measurements or special
connections.
We are equipped with modern digital pressure test equipment
and offer these facilities for independent (re)testing and
(re)certifying services.
Last but not least we are also in a position to offer complete
one-stop project packaging solutions. Our project services
include the project supply of ball, gate, globe, check,
butterfly & instrumentation valves, actuation, flanges,
gaskets & fasteners, onsite delivery, inspection, testing and
commissioning.
MEMBER OF NES COMPANIES
CTS Valves is a subsidiary of NES Companies. NES Companies
operates independent companies such as CTS Group, Gutteling
Hoses and Nedelko. With offices all around the world, the
holding provides strategic guidance and financial security
required to be leaders within their respective markets. With
a total of 300 employees, the companies together form
the NES Companies holding.
The expertise and deep industry knowledge have allowed
the holding to build trust with companies across multiple
vertical industries, throughout the world. The new worldwide
headquarters is located in The Netherlands, with a total area
of 7.400 m².
CTS VALVES
6. 6
RAPID VALVE DESIGN
One of CTS Valves core activities is rapid valve design and
manufacturing (fast track valve manufacturing). With this
service CTS Valves is focussing on situations where time is
of the essence, such as for fast-track projects, shut down,
turn around, sudden valve failure and missing or forgotten
project items. In such cases there is no time to allow extensive
conventional manufacturing lead times. For situations like
these CTS Valves is offering reliable rapid valve design and
manufacturing services.
Our well-equipped engineering department uses the latest
design software which features exceptional tools for creating
and managing 3D digital valve designs.
It allows superior core modelling and process workflows and
includes finite element simulation capabilities. Our FEA software
(finite element analysis) offers an environment for modelling,
simulation and review of product performance results. This
includes stress analyses, pressurised behaviour simulation as well
as flow and torque calculations. From daily product engineering
up to custom valves designs, our engineers are committed to
provide quick responses to any engineering challenge.
RAPID VALVE MANUFACTURING
Our flexible fully certified manufacturing facilities are well
equipped for manufacturing a wide range of high-end valves.
All valves are manufactured, assembled, tested, and certified
in our facilities in Dordrecht, the Netherlands. Our facilities
also allow mounting and testing of a wide range of actuators.
As you would expect we are certified to and comply with all
relevant and latest quality procedures.
Last but not least it is good to know that we believe in open
communication and transparency and welcome you to visit our
premises in order to see real time production of your valves.
Most of our valves are made to order but within our facilities
we also maintain a stock of (semi) finished valves and valve
components. This might well provide you with an opportunity to
get an even shorter delivery on these hard to find items!
RAPID MANUFACTURING
7. CTS VALVES | CORPORATE BROCHURE 7
APPLICATIONS
CTS subsea valves meet
performance, safety and
reliability expectations in the
deepest waters and some of
the harshest environments
in the offshore.
All our offshore valves
are designed to withstand
corrosive environments and
comply with all relevant
safety & design standards.
Our valves are the ideal tool
for handling a wide variety of
isolation tasks in applications
that involve oil and gas
processing fluids and gases.
Our severe service valves
allow customers across the
power spectrum to reduce
costs by providing extended
life time and optimized energy
efficiency.
Top technical challenges in
the chemical industry are
the ability to control fugitive
emissions that affect the
entire plant. We offer valve
solutions with low fugitive
emission.
Mining operators need reliable
valves and controls to handle
and withstand corrosive and
abrasive process fluids and
transport fluids. Our mining
valves are designed to withstand
the harshest mining and mineral
processing applications.
8. 8
ISOLATION VALVES
CTS manual or actuated isolating valves are used for reliable
and continued shut-off of process fluids and gases in a wide
variety of applications.
„„ Ball valves
„„ Gate valves
„„ Globe valves
„„ Check valves
„„ Dual plate check valves
SUBSEA VALVES
In today’s offshore oil and gas industry, wells have become
deeper than ever, causing a growing demand for a subsea
valves that can withstand extreme pressures and harshest
environments. The CTS Subsea valve range offers just that.
„„ Subsea ball valves
„„ Subsea gate valves
„„ Subsea check valves
„„ Subsea dual plate check valves
SEVERE SERVICE VALVES
Severe plant conditions can quickly turn into severe
consequences for your business. That is why companies turn to
CTS Valves. We design and manufacture severe service gate and
severe service ball valves for the most extreme applications.
„„ Severe service ball valves
„„ Severe service gate valves
PRODUCTS
PRODUCT OVERVIEW
CTS Valves is fully dedicated to rapid design,
manufacturing and the supply of hard to find non-stock
and non-commodity valves. Providing flexible on-demand
valve and actuation solutions for up-stream,
down-stream, process, power and mining markets, our
portfolio covers a comprehensive range of high-end ball,
gate, globe and check valves.
Our standard sizes range from 1/4” to 24”. Larger
sizes are available on request. Pressure classes range
from ANSI Class 150 to Class 4500 and API 5000 to
20000. All valves are designed, manufactured, tested
and documented according to all relevant
(inter)national or applicable end-user specifications.
9. CTS VALVES | CORPORATE BROCHURE 9
DOUBLE BLOCK & BLEED VALVES
Double block & bleed valves are developed for replacement of
2 valves + 1 drain or bleed valve. Double block & bleed valves
offer significant weight, space and costs savings. CTS DBB
valves are available in B16.10, manufacturer or customer
defined face to face dimensions.
„„ DBB ball valves
„„ DBB gate valves
„„ DBB instrumentation valves
„„ DBB mono flange valves
CUSTOM DESIGNED VALVES
CTS Valves designs and manufactures custom valves for unique
configurations and in unique applications. We offer a variety of
custom designed valves manufactured from carbon steel, stainless
steel, alloys, titanium and other exotic materials. We design and
manufacture products to customers specifications. We also offer
modification services on existing product to meet specific requirements.
„„ Application specific designs
„„ Valve upgrades & modifications
„„ Valves in all materials
VALVE MATERIALS
CTS Valves can provide valves in a wide variation of materials.
Due to our focus on rapid valve design and manufacturing we
predominately make use of forged materials. These materials
are obtained from a selection of west European forge masters.
On request we can also supply valves in casted equivalents. A
selection of frequently used material can be found on page 22.
Other materials are available on request.
„„ Carbon steel
„„ Alloy steel
„„ Stainless steel
VALVE ACTUATION & CONTROLS
Proper functioning of manual valves is of utmost importance. But also
actuated valves are supposed to work, each and every time. That is
why we have set the highest standards for reliability, safety and level of
control in our valve automation systems to suit any working environment.
„„ Gear units
„„ Subsea gear units
„„ Pneumatic actuators
„„ Hydraulic actuators
„„ Hydraulic subsea actuators
VALVES ON STOCK
Most of our valves are made to order but within our facilities
we also maintain a stock of (semi) finished valves and valve
components. This might well provide you with an opportunity to
get an even shorter delivery on these hard to find items!
PROJECT PACKAGING
Careful (project) planning will allow you ample time for
adequate and competitive project sourcing of valves. In order
to accommodate such project needs, CTS Valves also offers
a well balanced portfolio of competitive commodity valves for
project tenders.
„„ Cast and forged ball valves
„„ Cast and forged gate valves
„„ Cast and forged globe valves
„„ Cast and forged check valves
„„ Butterfly valves
„„ Electric actuators
„„ Gas over oil actuators
„„ Subsea actuators & controls
„„ Control systems
„„ Auxiliary and back up systems
„„ SBB valves
„„ Valves in all connections
„„ Specific envelop and face
to face dimensions
„„ Actuated valve packages
„„ Duplex steel
„„ Nickel alloy
„„ Titanium
10. Side entry ball valves | Top entry ball valves | 3-Way ball valves
Valve types: Floating mounted side entry ball valves
Trunnion mounted side entry ball valves
Standards: API, BS, ISO
Size range: 1/4” - 24”, full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, buttweld, socketweld, threaded, lugged, hub-end
Soft seated: PTFE, RTFE, PEEK, etc.
Metal seated: Tungsten carbide coating, chrome carbide coating
Options: High temperature design
Low temperature design
Fully welded design
Side entry ball valves
Top entry ball valves 3-Way ball valves
10
PRODUCTS
ISOLATION VALVES
CTS Valves manufacturers a comprehensive line of
isolation valves for oil and gas, petro-chemical, power
and mining industries. Our range includes ball, gate,
globe and check valves in a wide variety of materials,
classes and configurations. All valves are designed,
manufactured and tested in our well equipped
manufacturing facilities in The Netherlands.
BALL VALVES
CTS Valves produces a wide range of ball valves which include
floating and trunnion mounted ball valve designs (with single
or double piston effects). Valves are available in side-entry
(2 piece, 3 piece and mono body), welded and top entry
body designs. Ball valves are designed to meet requirements
of API6D, API6A, API 608 (API 598, API 607 Rev. 5/ISO
10497, ASME B16.5, B16.10 and/or B16.34).
CTS Ball valves are available in a wide array of valve materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with soft seats (PTFE, RPTFE, PEEK, DEVLON, etc.) or in metal
seat execution (Tungsten/Chrome carbide coatings).
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft, SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
standard & custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators, control systems or
HPU’s.
„„ Ball valves
„„ Gate valves
„„ Globe valves
„„ Check valves
„„ Dual plate check valves
11. Globe valves
Valve types: Straight pattern globe valves
Y-type globe valves
Angle type globe valves
Standards: BS, ISO, API
Size range: 1/4” - 12”, regular bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: High temperature design
Low temperature design
Bolted bennet
Pressure sealed bonnet
Welded bonnet
Gate valves
Valve types: Wedge gate valves
Through conduit gate valves
Slab gate valves
Expanding gate valves
Standards: BS, ISO, API
Size range: 2” - 24” full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: Bolted bonnet
Pressure sealed bonnet
Welded bonnet
CTS VALVES | CORPORATE BROCHURE 11
GATE VALVES
CTS Valves produces a wide range of OS&Y gate valves which
include wedge gate, parallel slide gate and through conduit
gate valves with bolted, welded or pressure sealed bonnets,
with standard or bellow seal sealing. Wedges are available in
flexible, solid, split wedge and double expanding design. Gate
valves are designed to meet requirements of ASME B16.34,
API 600, API 6D ASME B16.5, ASME B16.10, API 602,
API 6D and API 6A.
CTS Gate valves are available in a wide array of materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with stellite 6 or carbide coated plugs, discs and seats.
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
standard & custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators and control systems.
GLOBE VALVES
CTS Valves produces a wide range of OS&Y globe valves which
include straight pattern, angle pattern, y-pattern and stop
check globe valves with bolted, welded or pressure sealed
bonnets, standard or bellow seal sealing. Globe valves are
designed to meet requirements of ASME B16.34, BS-1873,
ASME B16.5, ASME B16.10 and API 602.
CTS Globe valves are available in a wide array of materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with stellite 6 or carbide coated discs & seats.
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
anti-static devices, standard & custom coating.
12. Check valves
Valve types: Swing check
Ball check
Piston check
Axial flex check
Tilting disc
Standards: BS, ISO, API
Size range: 1/4” - 12”, regular bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: High temperature design
Low temperature design
Bolted bennet
Pressure sealed bonnet
Welded bonnet
Dual plate check valves
Standards: BS, ISO, API
Size range: 2” - 12”
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, wafer, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: On request
12
PRODUCTS
CHECK VALVES
CTS Valves produces a wide range of check valves which
include swing, tilting disc, ball and piston check valves with
bolted, welded or pressure sealed bonnets. Check valves are
designed to meet requirements of ASME B16.34, BS-1868,
ASME B16.5, ASME B16.10, API 602, API 6D and API 6A.
CTS Check valves are available in a wide array of materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with stellite 6 or carbide coated gates & seats.
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, TUV design, sealant
injection system, buried service designs, fire safe designs &
certification, standard & custom coating.
DUAL PLATE CHECK VALVES
CTS Valves produces a range of dual plate check valves in
flanged, wafer or lugged design. Dual plate check valves are
designed to meet requirements of ASME B16.34, API598,
API6D, ISO 14313 and ASME B16.10.
CTS dual plate check valves are available in a wide array of
materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.), with stellite 6 or carbide coated discs or seats.
Options include additional NDE testing, NACE, high temperature
design, cryogenic design, sealant injection system, buried
service designs, fire safe designs & certification, standard &
custom coating.
14. Subsea ball valves
Standards: API6DSS, ISO14723
Size range: 2” - 24”, full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Soft seated: PTFE, RTFE, PEEK, etc.
Metal seaded: Tungsten carbide coating, chrome carbide coating
Options: Side entry, top entry
Bolted, fully welded design
Diver operated, ROV operated
Subsea actuated
14
PRODUCTS
SUBSEA VALVES
CTS Valves manufacturers a complete line of API6DSS
and API17D subsea valves for subsea oil and gas
applications. Our range includes ball, gate and
check valves in a wide variety of materials, classes
and configurations. All subsea valves are designed,
manufactured and tested in our well-equipped
manufacturing facilities in The Netherlands.
SUBSEA BALL VALVES
CTS Valves produces a wide range of subsea ball valves which
include floating and trunnion mounted ball valve designs (with
single or double piston effects). Subsea ball valves are available
in side-entry (2 piece), fully welded and top entry body designs.
CTS Subsea Ball valves are designed to meet requirements
of API6DSS, API17D, ISO 14723, ASME B16.5, B16.10 and
B16.34.
CTS Ball valves are available in a wide array of valve materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with soft seats (PTFE, RPTFE, PEEK, DEVLON, etc.) or in metal
seat execution (Tungsten/Chrome carbide coatings).
Options include hyperbaric testing, additional NDE testing,
sealant injection system, stem extensions, fire safe designs &
certification, standard & custom subsea coating.
Valves can be supplied with diver or ROV operated gears or
complete with hydraulic actuators, control systems, HPU’s etc.
„„ Subsea ball valves
„„ Subsea gate valves
„„ Subsea check valves
„„ Subsea dual plate check valves
15. Subsea gate valves
Valve types: Through conduit
Slab gate
Expanding gate
Standards: API6DSS, API17D, ISO14723
Size range: 2” - 24”, full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: Bolted bonnet
Pressure sealed bonnet
Welded bonnet
CTS VALVES | CORPORATE BROCHURE 15
SUBSEA GATE VALVES
CTS Valves produces a range subsea gate valves which
includes parallel slide gate and through conduit gate valves
with bolted, welded or pressure sealed bonnets, Subsea gate
valves are designed to meet requirements of API6D, API6DSS,
API6A, ISO14723, ASME B16.5, B16.10 and B16.34.
CTS Subsea gate valves are available in a wide array of
materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.), with stellite 6 or carbide coated plugs, discs and
seats.
Options include hyperbaric testing, additional NDE testing,
sealant injection system, stem extensions, fire safe designs &
certification, standard & custom subsea coating.
Valves can be supplied with diver or ROV operated gears or
complete with hydraulic actuators, control systems, HPU’s etc.
16. Subsea check valves
Standards: API6DSS, ISO14723
Size range: 1/4” - 12”, regular bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: Piggable
Lock-open feature
Subsea dual plate check valves
Standards: API, BS, ISO
Size range: 2” - 24”
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, wafer, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: On request
16
PRODUCTS
SUBSEA CHECK VALVES
CTS Valves produces a range of subsea check valves which
include swing check valves with bolted, welded or pressure
sealed bonnets. Subsea check valves are designed to meet
requirements of API6D, API6DSS, API6A, ISO14723,
ASME B16.5, B16.10 and B16.34.
CTS Subsea Check valves are available in a wide array of
materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.), with stellite 6 or carbide coated gates & seats.
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, TUV design, low and
zero emission designs, sealant injection system, buried service
designs, fire safe designs & certification, anti-static devices,
standard & custom subsea coating.
Valves can be supplied with diver or ROV operated gear for
lock-open position which will enable bi-directional pigging.
SUBSEA DUAL PLATE CHECK VALVES
CTS Valves produces a range of subsea dual plate check valves
in flanged wafer or lugged design. Dual plate check valves are
designed to meet requirements of ASME B16.34, API598,
API6D, API6DSS, ISO 14723, ISO 14313 and B16.10.
CTS subsea dual plate check valves are available in a wide array
of materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.), with stellite 6 or carbide coated discs or seats.
Options include additional NDE testing, NACE, sealant injection
system, fire safe designs & certification, standard & custom
subsea coating.
18. Severe service ball valves
Standards: BS, ISO
Size range: 1/4” - 12”, full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Tungsten carbide coating, chrome carbide coating
Options: High temperature design
Low temperature design
18
PRODUCTS
SEVERE SERVICE VALVES
CTS Valves manufactures a complete range of severe
service valves which are designed to withstand
abrasive, corrosive and extreme temperature
applications in harsh environments. Whether you
are looking for severe service valves for upstream,
downstream, process, power or mining, CTS Valves will
provide you with tailor made solutions for every severe
service condition.
The use of high strength, high alloy and extreme
temperature resistant material in combination with
selection of fit for purpose HVOF applied carbide
coatings as well as the latest sealing technology will
ensure maximised valve life under the harshest service
conditions.
SEVERE SERVICE BALL VALVES
CTS Valves manufactures a complete range of severe service ball
valves which are designed to withstand abrasive, corrosive and
extreme temperature applications in and harsh environments.
Our severe service ball valve range includes side-entry
(2 piece and three piece), welded and top entry body designs.
Severe service ball valves are designed to meet requirements
of API6D, API6A, API 608 (API 598, API 607 Rev. 5/
ISO 10497, ASME B16.5, B16.10 andB16.34.
CTS Severe service ball valves are available in a wide array of
valve materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.). All valves are supplied with HVOF carbide coated ball
and seats. A variety of HVOF coatings is available. Careful coating
selection will ensure optimum performance and extended seat life.
Options include additional NDE testing, NACE, high temperature
design, cryogenic design, locking devices, cavity relief & filler
systems, TA-luft, SPE 77/312 design, low and zero emission
designs, sealant injection system, stem extensions, buried
service designs, fire safe designs & certification, standard &
custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators, control systems,
HPU’s, etc.
„„ Severe service ball valves
„„ Severe service gate valves
19. Severe service gate valves
Valve types: Wedge gate
Through conduit gate
Slab gate
Expanding gate
Standards: API, BS, ISO
Size range: 2” - 24”, full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, butt-weld, socket weld, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: Bolted bonnet
CTS VALVES | CORPORATE BROCHURE 19
SEVERE SERVICE GATE VALVES
CTS Valves manufactures a complete range of severe service gate
valves which are designed to withstand abrasive, corrosive and
extreme temperature applications in and harsh environments.
Our severe service gate valve range includes parallel slide
and through conduit gate valves with bolted, welded or
pressure sealed bonnets and with standard or bellow seal
sealing. Wedges are available in flexible, solid, split wedge and
double expanding design . Gate valves are designed to meet
requirements of ASME B16.34, API 600, API 6D,
ASME B16.5, ASME B16.10, API 602, API 6D and API 6A.
CTS Severe service gate valves are available in a wide array of
materials (steel, stainless steel, duplex steel, alloys, super alloys
etc.), with stellite 6 or a variety of carbide coated gates and seats.
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
standard & custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators and control systems,
HPU’s, etc.
20. Double Block & Bleed valves
Valve types: Ball valves
Gate valves
Instrumentation valves
Mono flange valves
Standards: BS, ISO, API
Size range: 1/4” - 16” full bore, reduced bore, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Flanged, threaded, lugged, hub-end
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Metal seated: Tungsten carbide coating, chrome carbide coating
Options: Bolted, threaded or welded drain configurations
20
PRODUCTS
DOUBLE BLOCK & BLEED VALVES
Double block & bleed valves are developed for
replacement of 2 valves + 1 drain or bleed valve.
Double block & bleed valves offer significant weight,
space and costs savings. CTS DBB valves are available
in B16.10, manufacturer or customer defined face to
face dimensions.
DOUBLE BLOCK & BLEED VALVES
CTS Valves produces a wide range of double block & bleed
(DBB) valves which include floating and trunnion mounted
ball valve designs. DBB valves are available in numerous
configurations (ball, needle, gate) and connections, including
sample and injection valve configurations. Bleed configurations
range from bleed plugs, to needle valves and (DBB) ball and/or
OS&Y globe & gate valves. Face to face dimensions will comply
with either ASME B16.10 or manufacturer standard.
CTS DBB valves are available in a wide array of valve materials
(steel, stainless steel, duplex steel, alloys, super alloys etc.),
with soft seats (PTFE, RPTFE, PEEK, DEVLON) or in metal seat
execution (Tungsten/Chrome carbide coatings).
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft, SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
standard & custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators, control systems and
HPU’s.
„„ DBB ball valves
„„ DBB gate valves
„„ DBB instrumentation valves
„„ DBB mono flange valves
„„ SBB valves
21. CTS VALVES | CORPORATE BROCHURE 21
Custom designed valves
Valve types: Standard and bespoke
Standards: API, BS, ISO and bespoke
Size range: 2” - 24”, other sizes on request
Pressure classes: ANSI Class 150, 300, 600, 900, 1500, 2500, 4500
API 5000, 10000, 15000, 20000
Connections: Standard and bespoke
Materials: Carbon steel, low temperature carbon steel, low alloy steel,
stainless steel, duplex steel, nickel alloys, titanium, etc.
Facing: Stellite, tungsten carbide coating, chrome carbide coating
Options: On request
CUSTOM DESIGNED VALVES
CTS Valves designs and manufactures custom valves for
unique configurations and in unique applications. We
offer a variety of custom designed valves manufactured
from carbon steel, stainless steel, duplex steel, alloys,
titanium and other exotic materials. We design and
manufacture products to customers specifications. We
also offer modification services on existing product to
meet specific requirements.
CUSTOM DESIGNED VALVES
CTS Valves offers flexible on-demand valve design solutions for
your particular valve needs. Whether you require a specific
valve configuration, material or actuation & control solution,
our engineering team is available to discuss your needs and
provide you with a custom design solution.
Custom designed valves are designed to your specific (unique)
valve applications. Designs can be based on any given
international or client specifications.
CTS custom designed valves are available in a wide array of
valve materials (steel, stainless steel, duplex steel, alloys, super
alloys etc.), with soft seats (PTFE, RPTFE, PEEK, DEVLON) or in
metal seat execution (Tungsten/Chrome carbide coatings).
Options include additional NDE testing, NACE, high
temperature design, cryogenic design, locking devices, cavity
relief systems, TA-luft, SPE 77/312 design, low and zero
emission designs, sealant injection system, stem extensions,
buried service designs, fire safe designs & certification,
standard & custom coating.
Valves can be supplied with manual operators or complete with
electric, pneumatic or hydraulic actuators, control systems and
HPU’s.
„„ Application specific designs
„„ Valve upgrades & modifications
„„ Valves in all materials
„„ Valves in all connections
„„ Specific envelop and face to face dimensions
22. Valve materials
Carbon steel: ASTM A105N
ASTM A350 LF2
Alloy steel: ASTM A350 LF3
ASTM A182 F5a
ASTM A182 F9
ASTM A182 F11
ASTM A182 F22
ASTM A182 F91
AISI 4130
Stainless steel: ASTM A182 F304/F304L
ASTM A182 F316/316L
ASTM A182 F321
ASTM A182 F47
ASTM A182 F44 (6MO)
ASTM A182 F20 (Alloy 20)
AISI 410
Duplex steel ASTM A182 F51 (Duplex)
ASTM A182 F53 (Super duplex)
ASTM A182 F55 (Super duplex)
Nickel alloy: ASTM B564 N08825 (Inconel 825)
ASTM B564 N06600 (Inconel 600)
ASTM B564 N06625 (Inconel 625
ASTM B564 N04400 (Monel 400)
Titanium: ASTM B381 Gr. F2
ASTM B381 Gr. F3
Other materials available on request.
22
PRODUCTS
VALVE MATERIALS
CTS Valves can provide valves in a wide variation of
materials. Due to our focus on rapid valve design
and manufacturing we predominately make use of
forged materials. These materials are obtained from a
selection of west European forge masters. On request
we can also supply valves in casted equivalents. A
selection of frequently used material can be found
below, other are available on request.
VALVE MATERIALS
All custom valves are designed, manufactured and tested in
our well-equipped manufacturing facilities in The Netherlands.
„„ Carbon steel
„„ Alloy steel
„„ Stainless steel
„„ Duplex steel
„„ Nickel alloy
„„ Titanium
23. CTS VALVES | CORPORATE BROCHURE 23
VALVE ACTUATION & CONTROLS
Proper functioning of manual valves is of utmost
importance. But also actuated valves are supposed to
work, each and every time. That is why we have set
the highest standards for reliability, safety and level
of control in our valve automation systems to suit any
working environment.
VALVE ACTUATION & CONTROLS
CTS Valve can provide all valves complete with actuation to
suit your specific requirements and as such providing you
with a 1 stop solution for valves + actuators.
We offer a broad range of reputed brands and we are in
a position to supply actuated valves complete with control
systems which amongst others, includes; switch boxes,
positioners, partial stroke test systems, overrides, filters,
pressure regulators, fail safe tanks, line break systems, etc.
Our actuation range includes:
„„ Gear units
„„ Subsea gear units (hand wheel or ROV operated)
„„ Electric actuators
„„ Pneumatic actuators (single/double acting, piston or vane,
scotch-yoke or rack & pinion)
„„ Hydraulic actuators (single/double acting or compact design)
„„ Hydraulic subsea actuators (single/double acting or
compact design)
„„ Gas over oil actuators
„„ Gear units
„„ Subsea gear units
„„ Pneumatic actuators
„„ Hydraulic actuators
„„ Hydraulic subsea actuators
„„ Electric actuators
„„ Gas over oil actuators
„„ Subsea actuators & controls
„„ Control systems
„„ Auxiliary and back up systems
24. 24
PRODUCTS
VALVES ON STOCK
Most of our valves are made to order but within our
facilities we also maintain a stock of (semi) finished
valves and valve components. This might well provide
you with an opportunity to get an even shorter delivery
on these hard to find items!
25. CTS VALVES | CORPORATE BROCHURE 25
PROJECT PACKAGING
Careful (project) planning will allow you ample time for
adequate and competitive project sourcing of valves. In
order to accommodate such project needs, CTS Valves
also offers a well balanced portfolio of competitive
commodity valves for project tenders.
PROJECT PACKAGING
You will not always experience an immediate need for the valves
that you require. Careful (project) planning will allow you ample
time for adequate and competitive project sourcing of valves. In
order to accommodate such project needs,
CTS Valves also offers a well balanced portfolio of competitive
commodity valves for project tenders.
ON-SITE DELIVERY & INSTALLATION
If required we can also complete our valve packages with
counter flanges, gaskets and fasteners. We will ship all over
the globe and deliver on your doorstep. If needed, we can also
supervise installation and field testing. Please do not hesitate
to contact us with you project requirements.
We are able to supply complete project packages for ball,
gate, globe, check, butterfly and instrumentation valves. It
goes without saying that all valves will be supplied complete
with operators and actuators and controls in line with your
requirements.
„„ Cast and forged ball valves
„„ Cast and forged gate valves
„„ Cast and forged globe valves
„„ Cast and forged check valves
„„ Butterfly valves
„„ Actuated valve packages
28. CTS Valves B.V.
Bunsenstraat 1
3316 GC Dordrecht
The Netherlands
T +31 (0)85 750 10 15
E info@cts-valves.com
W www.cts-valves.com
Your distributor: