1. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO SYN COMPRESSOR 32
ISO VG 32
REV. 01ST JULY 2006
-------------------------------------------------------------------------------
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
-------------------------------------------------------------------------------
PRODUCT DESCRIPTION: is synthetic superior, compressor oils, formulated with Zinc free additive
package, containing antioxidants, corrosion inhibitors and metal deactivators, to provide satisfactory
viscosity/temperature characteristics, low foaming tendencies and good water separation properties.
COMPANY IDENTIFICATION:
Smessindo Sakti Mandraguna
BLENDING PLANT and LABORATORY DIVISION
Jln. Diponegoro KM 40 No. 62 Tambun-Bekasi 17510
Phone. 62-21 8808620 Fax. 62-21- 88354786
OFFICE
Menara Era Building # 10-03
Jl. Raya Senen Kav. 135-137 Jakarta 10410
Phone. 62-21-3862426, Fax: 62-21-3863448
-------------------------------------------------------------------------------
2. HAZARDS IDENTIFICATION
-------------------------------------------------------------------------------
HEALTH HAZARDS :
• No significant effects expected
ENVIRONMENTAL HAZARDS :
• This preparation does not require classification on the basis of environmental hazard.
PHYSICAL AND CHEMICAL HAZARDS / FIRE AND EXPLOSION HAZARDS :
• Low hazard. Material can form flammable mixtures or can burn only upon heating to temperatures
at or above the flash point.
• Toxic gases will form upon combustion.
-------------------------------------------------------------------------------
3. FIRST AID MEASURES
-------------------------------------------------------------------------------
INHALATION :
• Using proper respiratory protection, immediately remove the affected from over exposure victim.
Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical
Attention.
SKIN CONTACT :
• Immediately flush with large amounts of water; use soap if available. Remove contaminated
clothing, including shoes, after flushing has begun.
EYE CONTACT :
• Flush eyes with large amounts of water until irritation subsides. If irritation persists, get medical
attention.
INGESTION :
• DO NOT induce vomiting. If individual is conscious, give milk or water to dilute stomach contents.
Keep warm and quiet. Get prompt medical attention. DO NOT attempt to give anything by ,mouth
to an unconscious person.
-------------------------------------------------------------------------------
4. FIRE-FIGHTING MEASURES
-------------------------------------------------------------------------------
FIRE FIGHTING PROCEDURES :
• Use water spray to cool fire exposed surfaces and to protect personnel.
• Use foam, dry chemical, or water spray to extinguish fire.
SPECIAL FIRE PRECAUTIONS :
• Respiratory and eye protection required for fire fighting personnel.
HAZARDOUS COMBUSTION PRODUCTS :
• Fumes, smoke, carbon dioxide (CO2) and Carbon Monoxide (CO)
Page 1 of 4

2. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO SYN COMPRESSOR 32
ISO VG 32
REV. 01ST JULY 2006
-------------------------------------------------------------------------------
5. ACCIDENTAL RELEASE MEASURES
-------------------------------------------------------------------------------
LAND SPILL :
• Contain spilled liquid with sand or earth
• Recovery by pumping (use an explosion proof or hand pump) or with a suitable absorbent. If liquid is
too viscous for pumping, scrape up with shovels or pails and place in suitable containers for recycle
or disposal.
• Consult an expert on disposal of recovered material and ensure conformity to local disposal
regulations.
WATER SPILL :
• Warn other shipping. Notify port or relevant authority and keep public away. Shut off sources if
possible to do so without hazard. Confine if possible.
• Remove from surface by skimming or with suitable absorbents. If allowed by local authorities and
environmental agencies sinking and/or suitable dispersant may be used in non-confined waters.
• Consult an expert on disposal of any recovered material and ensure conformity to local disposal
regulations.
-------------------------------------------------------------------------------
6. HANDLING AND STORAGE
-------------------------------------------------------------------------------
STORAGE TEMPERATURE (Deg C) : Ambient
TRANSPORT TEMPERATURE (Deg C) : 125.0 Maximum
LOADING/UNLOADING TEMPERATURE (Deg C) : 125.0 Maximum
STORAGE/TRANSPORT PRESSURE (k Pa) : Atmospheric
STORAGE / HANDLING, GENERAL NOTES :
• Keep container closed. Handle containers with care. Open slowly in order to control possible pressure
release. Store in a cool, well-ventilated place away from incompatible materials.
• DO NOT handle, store or open near an open flame, sources of heat or sources of ignition. Protect material
from direct sunlight.
• DO NOT pressurize, cut, heat, or weld containers. Empty product containers may contain product residue.
DO NOT reuse empty containers without commercial cleaning or reconditioning.
-------------------------------------------------------------------------------
7. EXPOSURE CONTROL/SELF PROTECTION
-------------------------------------------------------------------------------
Ventilation : commonly there is no special regulation for ventilation or normal condition
Breath Protection : there is no special regulation on normal condition
Eye Protection : use eye protection equipment
Skin Protection : regulation for personnel hygiene still have to give a notice. Use the nitrile gloves, long arm
regulation
Exposure limit : this product doesn’t contain any material that have been known have exposure limit
value.
3 3
But we can use exposure limit value (OSHA PEL) from the vapor, i.e. 5.00 mg/m and ACGIH STEL, i.e. , 10 mg/m
-------------------------------------------------------------------------------
8. PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------
These are indicative values only. Please refer also to the product specification sheet.
LIQTRO SYN
Property Unit Method
COMPRESSOR 32
0
Density at 15 C Kg/liter ASTM D 4052 0.8406
Color ASTM D 1500 L 0.5
0
Flash Point (COC) C ASTM D 92 216
0
Viscosity at 40 C cSt ASTM D 445 30.33
0
Viscosity at 100 C cSt ASTM D 445 5.60
Viscosity Index ASTM D 2270 127
Acid Number mg KOH/g ASTM D 664 0.07
Copper Corrosion
0 ASTM D 130 1a
100 C, 3 hours
Rust Test ASTM D 665 B pass
Demulsibility, separation time ASTM D 1401 5
Page 2 of 4

3. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO SYN COMPRESSOR 32
ISO VG 32
REV. 01ST JULY 2006
-------------------------------------------------------------------------------
9. STABILITY AND REACTIVITY
-------------------------------------------------------------------------------
HAZARDOUS POLYMERIZATION : No
STABILITY (THERMAL, LIGHT, ETC) : Stable
CONDITION TO AVOID : Not applicable
MATERIALS AND CONDITIONS TO AVOID (INCOMPATIBILITY) : Strong oxidizing agents.
-------------------------------------------------------------------------------
10. TOXICOLOGICAL INFORMATION
-------------------------------------------------------------------------------
INHALATION :
• Negligible hazard at ambient (-18 to 38 Deg C) or recommended blending temperature.
• Vapors and/or aerosol which may be formed at elevated temperatures may be irritating to eyes
and respiratory tract.
SKIN CONTACT :
• Low order of toxicity.
• Frequent or prolonged contact may cause mild skin discomfort.
EYE CONTACT :
• Will cause slight eye discomfort, but will not injure eye tissue.
INGESTION :
• Minimal toxicity.
-----------------------------------------------------------------------------
11. ECOLOGICAL INFORMATION
-------------------------------------------------------------------------------
ENVIROMENTAL MOBILITY
This is a preparation and environmental assessment is based on component data and
that of similar products. A mineral oil component of this preparation floats and can
migrate from water to land. A component of this preparation has the potential to
bioconcentrate.
ENVIRONMENTAL DEGRADABILITY
This product is not expected to be “readily” biodegradable. A component (s) of this
preparation is expected to be “inherently” biodegradable according to OECD guidelines.
ECOTOXICITY AND BIOACCUMULATION
Low acute toxicity to aquatic organisms is expected.
-----------------------------------------------------------------------------
12. DISPOSAL CONSIDERATIONS
-------------------------------------------------------------------------------
• Empty drums should be taken for recycling, recovery or disposal through suitably qualified
or licensed contractor.
• Care should in any case be taken to ensure compliance with national and local
regulations.
-----------------------------------------------------------------------------
13. TRANSPORTATION INFORMATION
-------------------------------------------------------------------------------
USA DOT : not-regulated by USA DOT
RID/ADR : not-regulate by RID/ADR
IMO : not-regulate by IMO
IATA : not regulate by IATA
Page 3 of 4

4. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO SYN COMPRESSOR 32
ISO VG 32
REV. 01ST JULY 2006
-----------------------------------------------------------------------------
14. REGULATION INFORMATION
-------------------------------------------------------------------------------
Based on U.S. Superfund Amendment and Reauthorization Act (SARA) this product doesn’t
contain EXTREMELY HAZARDOUS more that 1%
(SARA 311/312) REPORTABLE HAZARD CATEGORIES :
This product contain chemical as follows:
CHEMICAL % wt
Hydrotreated Dist., Hvy. Paraffinic 4.7%
-----------------------------------------------------------------------------
15. ANOTHER INFORMATION
-------------------------------------------------------------------------------
Product condition and fitting on special application out of company guarantee, all of the using risk
will be the user responsibility. User and officer that handling this product must have the warning
and product handling procedure. It is forbidden to change this document, expect with law legacy.
Additional information is available on special request
-----------------------------------------------------------------
Page 4 of 4