Common names of pigs
•
0 likes•829 views
This document contains the names and registration numbers of 19 students in a group assignment at Sokoine University of Agriculture. It also contains the task of writing down the common names of pigs. The document then lists 13 common names of pigs, including boar, sow, stag, gilt, store pigs, runt, and litter. It provides classifications of pigs as pork, bacon, or lard producers. References are included at the end.
Report
Share
Report
Share
Download to read offline
Recommended
Montessori Summer Session Slideshow
The document provides information about Loyola University Maryland's Baltimore campus for students attending the Montessori Graduate Summer Session program. It notes that the campus will be quiet with undergraduate students away for the summer. It describes dining options with one cafe open for lunch on weekdays and students responsible for their own other meals. It highlights the campus library that is near the dorms where some students will live. The dorms described as older but with kitchens and a 24/7 computer lab available. It provides a contact for any additional questions.
FUKashere 3rd Postgraduate Admission List for 2019/2020 session
FUKashere 3rd Postgraduate Admission List for 2019/2020 session
https://www.alluniversitynews.com/2020/01/fukashere-3rd-postgraduate-admission.html
2013 Montessori Summer Session
The document provides information about Loyola University Maryland's Baltimore campus and housing for students attending the Montessori Graduate 2013 Summer Session. It notes that the campus will be quiet with undergraduate students away for the summer. It also details that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. The summary describes the dorms available for housing, the Ahern and McCauley dorms, which are older but have kitchens and a 24/7 computer lab is available in Ahern dorm. It closes by providing a contact for any additional questions.
Summer session slideshow
The document provides information for students attending Loyola University Maryland's Montessori Graduate 2014 Summer Session. It describes the quiet campus environment with undergraduate students away for the summer. It notes that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. It also details the dormitory and library facilities that students will be familiar with and use, including the older but equipped Ahern and McCauley dorms near the library that provide kitchens and a 24/7 computer lab.
Montessori Summer Session 2012
The document provides information about Loyola University Maryland's Baltimore campus and housing for students attending the 2012 Montessori Graduate Summer Session. It notes that the campus will be quiet with undergraduate students away for the summer. It also details that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. The summary describes the Ahern and McCauley dorms, which are located near the library, as older but providing kitchens and having a 24/7 computer lab available in Ahern dorm.
Curriculum Vitae
Sean Logan recently completed his GCSEs and was accepted to study IT, PE, and Health & Social Care at 6th Form at Maricourt Catholic High School. He gained work experience at Aintree Hospital NHS Foundation Trust in their IT department where he helped repair computers and printers. His interests include various sports like basketball, football, swimming, and meeting up with friends.
Football Survey
This document lists the members of a group project titled "Big 4 Pattern" for the module UB0203: Developing the Skills of Academic Numeracy. The group members are Mohammad Azri Bin Md Umar, MuhdSaufi Bin Puasa, Jackson Budin, NurAdibatul Adzimah, and MuhdYusof Bin Ibrahim.
Joe cv
Joseph Hayes is a 22-year-old student currently studying a Level 3 Media BTEC at Eccles College. He previously attended St George's RC High School in Walkden. His hobbies include cricket, where he represented Salford City, and rugby league, where he played for Leigh Miners from ages 6 to 15 and captained school and club cricket teams. He is looking for part-time employment to gain experience and earn money while continuing his studies.
Recommended
Montessori Summer Session Slideshow
The document provides information about Loyola University Maryland's Baltimore campus for students attending the Montessori Graduate Summer Session program. It notes that the campus will be quiet with undergraduate students away for the summer. It describes dining options with one cafe open for lunch on weekdays and students responsible for their own other meals. It highlights the campus library that is near the dorms where some students will live. The dorms described as older but with kitchens and a 24/7 computer lab available. It provides a contact for any additional questions.
FUKashere 3rd Postgraduate Admission List for 2019/2020 session
FUKashere 3rd Postgraduate Admission List for 2019/2020 session
https://www.alluniversitynews.com/2020/01/fukashere-3rd-postgraduate-admission.html
2013 Montessori Summer Session
The document provides information about Loyola University Maryland's Baltimore campus and housing for students attending the Montessori Graduate 2013 Summer Session. It notes that the campus will be quiet with undergraduate students away for the summer. It also details that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. The summary describes the dorms available for housing, the Ahern and McCauley dorms, which are older but have kitchens and a 24/7 computer lab is available in Ahern dorm. It closes by providing a contact for any additional questions.
Summer session slideshow
The document provides information for students attending Loyola University Maryland's Montessori Graduate 2014 Summer Session. It describes the quiet campus environment with undergraduate students away for the summer. It notes that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. It also details the dormitory and library facilities that students will be familiar with and use, including the older but equipped Ahern and McCauley dorms near the library that provide kitchens and a 24/7 computer lab.
Montessori Summer Session 2012
The document provides information about Loyola University Maryland's Baltimore campus and housing for students attending the 2012 Montessori Graduate Summer Session. It notes that the campus will be quiet with undergraduate students away for the summer. It also details that the Boulder Garden Café will be open for lunch during the week, while other dining services will be closed due to the small student population. The summary describes the Ahern and McCauley dorms, which are located near the library, as older but providing kitchens and having a 24/7 computer lab available in Ahern dorm.
Curriculum Vitae
Sean Logan recently completed his GCSEs and was accepted to study IT, PE, and Health & Social Care at 6th Form at Maricourt Catholic High School. He gained work experience at Aintree Hospital NHS Foundation Trust in their IT department where he helped repair computers and printers. His interests include various sports like basketball, football, swimming, and meeting up with friends.
Football Survey
This document lists the members of a group project titled "Big 4 Pattern" for the module UB0203: Developing the Skills of Academic Numeracy. The group members are Mohammad Azri Bin Md Umar, MuhdSaufi Bin Puasa, Jackson Budin, NurAdibatul Adzimah, and MuhdYusof Bin Ibrahim.
Joe cv
Joseph Hayes is a 22-year-old student currently studying a Level 3 Media BTEC at Eccles College. He previously attended St George's RC High School in Walkden. His hobbies include cricket, where he represented Salford City, and rugby league, where he played for Leigh Miners from ages 6 to 15 and captained school and club cricket teams. He is looking for part-time employment to gain experience and earn money while continuing his studies.
The 3 lies game
The document outlines Joan's responses to common questions, providing details about her name, age, place of birth, address, family, education, hobbies, likes and dislikes, and plans for the summer. It includes lies about some of the information provided, such as her age, address, and activities over the summer.
London Colleges map
This document lists 49 colleges located in London, including general further education colleges, sixth form colleges, and specialist colleges. The colleges are numbered and include institutions such as Barking & Dagenham College, City & Islington College, Croydon College, Havering College of FE and HE, Kingston College, Lewisham College, Newham FE College, Redbridge College, South Thames College, Tower Hamlets College, Uxbridge College, and Westminster Kingsway College.
DEPARTMENT OF PNG STUDIES AND INTERNATIONAL RELATIONS
This document is a summary of the 2016 open day for the Department of PNG Studies and International Relations Politics Strand. It lists the team leader, Victor Lee Daniel, and 23 students who have signed up, including their name, year level, and sex. It notes that the topics for discussion have yet to be confirmed due to late changes to the strands. The team leader will consult with Mr. Kuias and Fr. Harry to determine appropriate politics topics and units. Students will be informed via email and notices as to when the meeting will take place and are urged to check their emails and the notice boards for updates.
THE GOOD AND BAD THINGS AROUND MAKERERE UNIVERSITY.
Makerere University was established in 1922 as a technical college and became a university in 1963. It has approximately 40,000 undergraduate and 3,000 postgraduate students. The document provides details about the university's history, colleges and departments, as well as positive and negative aspects of the campus, including places of worship, green spaces, halls of residence, sculptures, libraries, and issues with roads, garbage collection, and building conditions.
Cultural Studies 201
Group assignments were given for a Cultural Studies course at Science University's Faculty of Arts, Humanities, and Languages. Five groups were assigned chapters from the course to research and present on by February 7, 2020. Group 1 was to cover chapter 1 on coping with problems. Group 2 was assigned chapter 2 on landscape and the environment. Group 3 received chapter 2 on the physical and human environment. Chapter 3 on types of farming was given to Group 4. Group 5's topic was chapter 4 on the Association of Southeast Asian Nations.
The holy_month_of_ramadan
Ramadan is the ninth month of the Islamic lunar calendar and is marked by a month-long fast from dawn to sunset where Muslims refrain from eating, drinking, and engaging in desires. It commemorates when the Quran was first revealed to the Prophet Muhammad and is one of the five pillars of Islam. During this month, Muslims focus on prayer, charity, spiritual reflection and spending time with family and community. At the end of Ramadan is the celebration of Eid-ul-Fitr, where food is donated to the poor and people gather for prayer, meals and gift giving.
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
More Related Content
What's hot
The 3 lies game
The document outlines Joan's responses to common questions, providing details about her name, age, place of birth, address, family, education, hobbies, likes and dislikes, and plans for the summer. It includes lies about some of the information provided, such as her age, address, and activities over the summer.
London Colleges map
This document lists 49 colleges located in London, including general further education colleges, sixth form colleges, and specialist colleges. The colleges are numbered and include institutions such as Barking & Dagenham College, City & Islington College, Croydon College, Havering College of FE and HE, Kingston College, Lewisham College, Newham FE College, Redbridge College, South Thames College, Tower Hamlets College, Uxbridge College, and Westminster Kingsway College.
DEPARTMENT OF PNG STUDIES AND INTERNATIONAL RELATIONS
This document is a summary of the 2016 open day for the Department of PNG Studies and International Relations Politics Strand. It lists the team leader, Victor Lee Daniel, and 23 students who have signed up, including their name, year level, and sex. It notes that the topics for discussion have yet to be confirmed due to late changes to the strands. The team leader will consult with Mr. Kuias and Fr. Harry to determine appropriate politics topics and units. Students will be informed via email and notices as to when the meeting will take place and are urged to check their emails and the notice boards for updates.
THE GOOD AND BAD THINGS AROUND MAKERERE UNIVERSITY.
Makerere University was established in 1922 as a technical college and became a university in 1963. It has approximately 40,000 undergraduate and 3,000 postgraduate students. The document provides details about the university's history, colleges and departments, as well as positive and negative aspects of the campus, including places of worship, green spaces, halls of residence, sculptures, libraries, and issues with roads, garbage collection, and building conditions.
Cultural Studies 201
Group assignments were given for a Cultural Studies course at Science University's Faculty of Arts, Humanities, and Languages. Five groups were assigned chapters from the course to research and present on by February 7, 2020. Group 1 was to cover chapter 1 on coping with problems. Group 2 was assigned chapter 2 on landscape and the environment. Group 3 received chapter 2 on the physical and human environment. Chapter 3 on types of farming was given to Group 4. Group 5's topic was chapter 4 on the Association of Southeast Asian Nations.
The holy_month_of_ramadan
Ramadan is the ninth month of the Islamic lunar calendar and is marked by a month-long fast from dawn to sunset where Muslims refrain from eating, drinking, and engaging in desires. It commemorates when the Quran was first revealed to the Prophet Muhammad and is one of the five pillars of Islam. During this month, Muslims focus on prayer, charity, spiritual reflection and spending time with family and community. At the end of Ramadan is the celebration of Eid-ul-Fitr, where food is donated to the poor and people gather for prayer, meals and gift giving.
What's hot (6)
DEPARTMENT OF PNG STUDIES AND INTERNATIONAL RELATIONS
DEPARTMENT OF PNG STUDIES AND INTERNATIONAL RELATIONS
THE GOOD AND BAD THINGS AROUND MAKERERE UNIVERSITY.
THE GOOD AND BAD THINGS AROUND MAKERERE UNIVERSITY.
More from musadoto
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land
that is devoted primarily of agricultural process with the primary objective of producing food and other
commercial crops. Or an area of water that is devoted primarily to agricultural process in order to
produce and manage such commodities as fibers, grains, livestock or fuel.
The process of working the ground, planting seeds and growing of planting known as farming.it can
described s raising of animals for milk and meat as farming.
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
What is an Engine?
Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power.
The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine.
These processes include:
The suction of air (also known as breathing or aspiration).
Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form.
Igniting the air-fuel mixture with a spark (petrol engine).
Burning of highly atomized fuel particles which results in releasing / ejection of heat energy.
How does an Engine work?
The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons.
This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels.
A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.
In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor.
In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines
used for speeding up agriculture production.
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind.
Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere
In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.
More from musadoto (20)
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Fluids mechanics (a letter to a friend) part 1 ...
Fluids mechanics (a letter to a friend) part 1 ...
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Recently uploaded
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Recently uploaded (20)
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Common names of pigs
- 1. Sokoine university of agriculture As 101 Group assignment, group no. 5 Lecturer:mr komba Submission date: 22/1/2017 Name of students Registration number CHIKOLIA OSCAR Age/j/2016/0307 MNKONDYA FREDY B. Age/j/2016/0330 JUMA YUSUFU Age/d/2016/0368 KYOBA ABDULRAZAK A. Age/e/2016/0416 MAYALA MUSA Age/j/2016/0348 BAI SAMSON L Age/j/2016/0290 SHABAN LUDOVICK OSIRA Age/d/2016/0402 MARKO GIDION Age/j/2016/0380 AUSI MOHAMED ALLY Age/j/2016/0244 MNG’ONG’O LULU DANFORD Age/j/2016/0359 NICHOLAUS ELIA Age/d/2016/0392 MAPUNDA FREDY J. Age/d/2016/0379 MARTINE THOMS N. Age/d/2016/0381 SEMWALI FRIDA MALANDA Age/j/2016/0327 DISMAS JOSEPH Age/j/2016/0305 JAGAD ELIAS Age/j/2016/0317 MANDARA EZROM B Age/j/2016/0378 LUGANO MWAKYUSA Age/j/2016/0157
- 2. TASK: To write down the common names of pig. COMMON NAMES OF PIGS Pigs are classified into three types as follow: 1: Pork 2: Bacon 3: Lard producer The common names of pigs are as follow: BOAR An entire adult male pig SOW An adult female pig used for breeding. STAG A castrated male pig normally castrated after it has matured. GILT A young female pig to be kept for breeding. STORE PIGS Pigs between weaning and fatling 8-15 weeks old. RUNT The smallest piglet of the litter usually the last to be farrowed such as pigs are small because they occupied the extremely tip of the urine horns during pregnancy. PTSIGLE These are young pigs under six month’s age. LITTER This is a group of piglets farrowed by the same sow at the same time. FARROWING The process of giving birth as applied to pig. REFFERENCES: http:// www.pigsclassification.com http://www.domesticatedanimals.com http://www.pigfeatures.com