CN ForkLift Training Center provides training and certification programs. Get forklift license from professional trainers in Ontario.

1. CN FORKLIF TRAINING
CENTRE
CN Forklift Training Centre is the leading skills training
organization in Mississauga on Canada. Here at CN
Forklift Training Centre we have expanded our
earthmoving operations to be able to better offer a
complete earthmoving training experience.

2. Overview
 Only trained and evaluated operators
can drive forklifts
 Employer certifies successful completion
of training and evaluation
 Operators can only drive the types of
forklifts on which they have been trained

3. Forklift Rules
 Keep the load close
to the ground
 Keep to the right
 Obey speed limits
 Slow down, sound
horn where vision is
obstructed

4. RE-TRAINING
 ASSIGNED TO
DIFFERENT TYPE OF
TRUCK
 EVALUATE
OPERATOR’S
PERFORMANCE
EVERY 3 YEARS
 Refresher course every
3 years (not required)
 CONDITIONS CHANGE
IN WORKPLACE

5. Retraining re-
evaluation
 Triggered by
certain events:
 Accidents
 Near-misses
 Assignment to
different type of truck
 Changes in work
environment
 Observation of unsafe
operation

6. BASIC FORKLIFT PRINCIPLES
 OVERHEAD GUARD
 MAST
 CARRIAGE
 BACKREST
 LIFT CYLINDER
 TILT CYLINDERS
 FORKS
LOAD CAPACITY
6000 lbs
PROPANE ONLY

7. Components of a Forklift
Truck

8. Maritime Industrial Trucks

9. Picking up loads
 Never exceed the rated
capacity of your unit
 Forks must be spaced
properly
 Be sure the load is stacked
properly and is balanced
 Secure the load to the pallet
 Drive into load as far as
possible
 Tilt the load back slightly &
then lift it
 Watch for overhead objects
or side objects
 Lower load 4 to 6 inches
above ground level for
travelling

10. Stability of Powered
Industrial Trucks
 Stability Triangle
 Longitudinal Stability
 Lateral Stability
 Dynamic Stability

11. Safe Work Procedures
 Always operate within
the specific capacity of
your equipment.
 Always look in the
direction of travel.
 Always think about the
hazards of the route you
must take before you get
there.
 Always operate your
equipment at safe
speed.

12. Stability Triangle
Load CG
Vertical
Stability
Line
(Line of Action)
Combined CG
Truck CG
Load CG
Combined CG
Vertical
Stability
Line
(Line of Action)
Truck CG
The vehicle is stable This vehicle is unstable and
will continue to tip over

13. Preoperation Inspection
 As an authorized
operator, it is your
responsibility to make
sure your forklift
functions properly
 OSHA requires
preparation
inspections
 Company wants to
comply with OSHA
and be sure
equipment is
maintained

14. Fueling & charging of batteries

15. Workplace - Related training
Topics
 Pedestrian traffic
 Narrow aisles,
restricted areas
 Hazardous
locations
 Ramps, sloped
surfaces
 Closed environments

16. CN FORKLIFT TRAINING CENTRE
Thank You
Email : liftsafety@gmail.com
Phone : (905)-405-0001