Top Rated Call Girls Vashi : 9920725232 We offer Beautiful and sexy Call Girl...
Clutch_And_Its_Types[1].pptx
1. Clutch And Its Types
Submitted By:
Name : Abhishek Sharma
Year : 2nd year(III semester)
Branch : Mechanical engineering Submitted To:
Ass. Prof. Mrs. Abhilasha Chaudhary
2. What is Clutch?
• Clutch is a mechanical device used in the
transmission system of a vehicle.
• It engages and disengages power
transmission, especially from a drive shaft to
a driven shaft.
Clutch
Drive shaft
Driven Shaft
3. Important parts of Clutch
1. Flywheel: This clutch part is mounted on the
crankshaft, it keeps running as long as the engine
is working. A friction disc is mounted on the outer
side of the flywheel
Flywheel
4. What is Clutch?
2. Friction disc: the friction disc could be single or multiple
discs depending on its application. It is made an of material
with a high coefficient of friction. The friction disc is
mounted on a drive shaft.
Flywheel
5. Important parts of Clutch
3. Pressure plate: The plate attached to the flywheel is called a
pressure plate. It spins along with the flywheel. Covering the clutch
plate from one side, it presses it against the friction plate. When the
clutch pedal is applied, it clamps down on the clutch plate and enables
swift
gear movements and prevents
vibrations that result in wear and tear.
Flywheel
Friction plate
Spring
6. Important parts of Clutch
4. Diaphragm Spring :
When we apply the clutch pedal, the motion is directly transmitted to
the diaphragm spring. This makes the diaphragm spring to pull the
pressure plate away from the clutch plate and allow free movement of
gears. the function of the springs is to move the friction disc
back and forth. Clutches use
diaphragm spring and levers help to
retract the spring.
7. Use Of Coil Springs in Clutch
In an clutch you can see a few coil springs on the clutch disc. These are used to
smooth out the fluctuations and vibrations from the engine power output. It is clear
that the hub and disc are not directly connected. The engine power first reaches
the disk then it transfers to the springs and finally to the output hub.
This means that the springs will
dampen out most of the power flow
fluctuation from the engine and the
motion transferred to the
vehicle will be much smoother.
8. How Clutch Works?
A hydraulic system transfer the clutch motion to the centre
of spring.When diaphram spring is pressed the power
transmission discontinued, during this time You can make a
gear change.
The clutch pedal is released after the gear
change and the power flows continuous
again in the engine, this is how the clutch
work.
Hydraulic system
Clutch pedal
Clutch
9. Different types of clutches:
The following stated below represent different types of clutch used on
engines
•Single-plate clutch
•Multi-plate clutch
•Cone clutch
•Centrifugal clutch
•Electromagnetic clutch
•Hydraulic clutch
Muti Plate clutch
Single Plate Clutch