The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark C500, Y180 Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material is not to be distributed. The index includes sections on engines, transmissions, hydraulics, electrical systems, brakes, steering and other components. Safety practices and proper maintenance procedures are outlined to avoid injury and ensure safe operation.
Clark C500, Y250S Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
The document provides maintenance and safety information for a Clark lift truck model SM-560. It includes sections on safety signs and messages, user safe maintenance practices, and a planned maintenance program. The planned maintenance program outlines periodic inspections and maintenance tasks that should be performed, including inspecting nameplates, wheels and tires, controls, brakes, steering, batteries, and mechanisms. It stresses the importance of a clean lift truck and testing all functions before returning the truck to operation.
Clark TMG 12-25 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for various parts, and procedures for servicing components such as motors, hydraulics, brakes, steering, and other systems. The manual uses a standardized grouping and numbering system to organize the content and make specific information easy to locate.
Clark TMG 13-20X Forklift Service Repair Manual.pdfdjdksmmdmd
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Komatsu SK815-5 Skid Steer Loader Service Repair Manual (SN 37BF00902 and up)...djdksmmdmd
This shop manual provides instructions for servicing Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. It is divided into sections covering the machine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Safety precautions are prominently featured to ensure workers' safety during repair operations.
John Deere Alternators & Starter Motors Service Repair Manual.pdfdjdksmmdmd
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and wearing protective equipment.
John Deere 12PC Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on the mowers.
Clark C500, Y180 Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material is not to be distributed. The index includes sections on engines, transmissions, hydraulics, electrical systems, brakes, steering and other components. Safety practices and proper maintenance procedures are outlined to avoid injury and ensure safe operation.
Clark C500, Y250S Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
The document provides maintenance and safety information for a Clark lift truck model SM-560. It includes sections on safety signs and messages, user safe maintenance practices, and a planned maintenance program. The planned maintenance program outlines periodic inspections and maintenance tasks that should be performed, including inspecting nameplates, wheels and tires, controls, brakes, steering, batteries, and mechanisms. It stresses the importance of a clean lift truck and testing all functions before returning the truck to operation.
Clark TMG 12-25 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for various parts, and procedures for servicing components such as motors, hydraulics, brakes, steering, and other systems. The manual uses a standardized grouping and numbering system to organize the content and make specific information easy to locate.
Clark TMG 13-20X Forklift Service Repair Manual.pdfdjdksmmdmd
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Komatsu SK815-5 Skid Steer Loader Service Repair Manual (SN 37BF00902 and up)...djdksmmdmd
This shop manual provides instructions for servicing Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. It is divided into sections covering the machine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Safety precautions are prominently featured to ensure workers' safety during repair operations.
John Deere Alternators & Starter Motors Service Repair Manual.pdfdjdksmmdmd
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and wearing protective equipment.
John Deere 12PC Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on the mowers.
John Deere 12PB Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 5E 2BV Blower Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for the 5E and 2BV blowers, including engine details like displacement, bore, stroke, compression ratio, carburetor, lubrication, fuel, idle and operating speeds, starter, ignition system, spark plug, magneto air gap, and fuel tank capacities. It also lists the blower type as centrifugal and single stage.
John Deere 3-179D OEM Engine Service Repair Manual.pdfdjdksmmdmd
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks safely operating, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes safety practices for maintenance, such as raising the wheels, disconnecting power, and using blocks before working under lifted components.
Kubota BX1500D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for using a parts book for an engine. It explains the column headings in parts book pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they represent. An example page from the parts book is then shown listing the specific parts for an engine with the corresponding information.
Clark EPG 15-18 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for parts, and procedures for servicing various systems of the forklift such as the battery, wiring, motors, brakes, hydraulics, tilt cylinders, and more. The document uses a standardized grouping and numbering system to organize the content and make specific sections and pages easy to locate.
Kubota BX2230D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The remainder of the document lists specific part numbers and descriptions for a BX2230D tractor organized by system or component.
Kubota L35 Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. Finally, it provides an index of all product parts for reference L35 and lists the relevant parts book for each item.
Kubota G4200H Lawn mower Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
Komatsu SK714-5 Skid Steer Loader Service Repair Manual (SN 37AF01876 and up)...djdksmmdmd
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfdjdksmmdmd
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines, fuel systems, and electrical systems. It also includes theory of operation, diagnostic procedures, and testing procedures. The manual should be used along with the machine's technical manual for information on removing and installing the engine, and accessing engine components. The manual emphasizes safety and provides illustrated, step-by-step instructions for diagnosis and repair of engine systems.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...djdksmmdmd
This document provides instructions for servicing Powertech 4.5L and 6.8L diesel engines. It outlines five technical manuals that cover different aspects of the engines, with this document focusing on the base engine. The introduction provides safety information and explains how to use the manual, including cleaning the engine before repair. It directs technicians to companion manuals for fuel system repair, operation and diagnostics based on the specific fuel system for the engine being serviced.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists the required tools and presents a step-by-step procedure for disassembling the final drive components. This includes removing gears, seals, springs, and other parts. It then describes assembling the main housing, motor housing, and final drive components in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
This document provides assembly instructions for the final drive of a 323F LN excavator in 3 sentences or less:
The document outlines the steps to assemble the final drive of a 323F LN excavator, including installing bearings, seals, gears, and other components in the correct order and orientation using various tools. Proper assembly requires precise measurement and installation of shims to achieve the correct bearing preload. Following the detailed multi-step process ensures the final drive is assembled correctly.
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator. The removal procedure involves taking off 12 components including adapters, gears, idler hubs and sleeve bearings. The installation procedure outlines 20 steps for reinstalling these components and ensuring proper orientation, alignment and torque specifications are followed. Proper cleaning and lubrication of parts is emphasized to prevent wear and damage.
Caterpillar Cat 323D SA Excavator (Prefix NES) Service Repair Manual (NES0000...djdksmmdmd
The document provides instructions for removing and installing the flywheel and flywheel housing on a C6.4 engine. It describes removing the muffler, crankshaft position sensor, bolts securing the flywheel, and installing lifting tools to remove the flywheel. It also details removing the flywheel housing bolts and oil seal, checking dowels and installing a new gasket and housing. Reinstallation involves installing the oil seal, flywheel housing, flywheel, crankshaft position sensor and muffler.
John Deere 113 172 Clipper Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for the 5E and 2BV blowers, including engine details like displacement, bore, stroke, compression ratio, carburetor, lubrication, fuel, idle and operating speeds, starter, ignition system, spark plug, magneto air gap, fuel tank capacities, and blower type. It also lists the 113 and 172 hedge clippers and 110G, 210G, 240G, and 260G trimmers but does not provide details for those machines.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 314F excavator. It outlines 16 steps to disassemble the final drive, removing components like the sprocket, traction control valve, and barrel assembly. It then details 14 steps to disassemble the counterbalance valve, removing springs, spools, and relief valves. Finally, it lists 10 steps to disassemble the travel motor, removing pistons, guides, plates and the barrel assembly. Safety notices are included throughout to warn of potential injuries from parts or released pressures.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
John Deere 12PB Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 5E 2BV Blower Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for the 5E and 2BV blowers, including engine details like displacement, bore, stroke, compression ratio, carburetor, lubrication, fuel, idle and operating speeds, starter, ignition system, spark plug, magneto air gap, and fuel tank capacities. It also lists the blower type as centrifugal and single stage.
John Deere 3-179D OEM Engine Service Repair Manual.pdfdjdksmmdmd
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks safely operating, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes safety practices for maintenance, such as raising the wheels, disconnecting power, and using blocks before working under lifted components.
Kubota BX1500D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for using a parts book for an engine. It explains the column headings in parts book pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they represent. An example page from the parts book is then shown listing the specific parts for an engine with the corresponding information.
Clark EPG 15-18 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for parts, and procedures for servicing various systems of the forklift such as the battery, wiring, motors, brakes, hydraulics, tilt cylinders, and more. The document uses a standardized grouping and numbering system to organize the content and make specific sections and pages easy to locate.
Kubota BX2230D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The remainder of the document lists specific part numbers and descriptions for a BX2230D tractor organized by system or component.
Kubota L35 Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. Finally, it provides an index of all product parts for reference L35 and lists the relevant parts book for each item.
Kubota G4200H Lawn mower Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
Komatsu SK714-5 Skid Steer Loader Service Repair Manual (SN 37AF01876 and up)...djdksmmdmd
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfdjdksmmdmd
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines, fuel systems, and electrical systems. It also includes theory of operation, diagnostic procedures, and testing procedures. The manual should be used along with the machine's technical manual for information on removing and installing the engine, and accessing engine components. The manual emphasizes safety and provides illustrated, step-by-step instructions for diagnosis and repair of engine systems.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...djdksmmdmd
This document provides instructions for servicing Powertech 4.5L and 6.8L diesel engines. It outlines five technical manuals that cover different aspects of the engines, with this document focusing on the base engine. The introduction provides safety information and explains how to use the manual, including cleaning the engine before repair. It directs technicians to companion manuals for fuel system repair, operation and diagnostics based on the specific fuel system for the engine being serviced.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists the required tools and presents a step-by-step procedure for disassembling the final drive components. This includes removing gears, seals, springs, and other parts. It then describes assembling the main housing, motor housing, and final drive components in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
This document provides assembly instructions for the final drive of a 323F LN excavator in 3 sentences or less:
The document outlines the steps to assemble the final drive of a 323F LN excavator, including installing bearings, seals, gears, and other components in the correct order and orientation using various tools. Proper assembly requires precise measurement and installation of shims to achieve the correct bearing preload. Following the detailed multi-step process ensures the final drive is assembled correctly.
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator. The removal procedure involves taking off 12 components including adapters, gears, idler hubs and sleeve bearings. The installation procedure outlines 20 steps for reinstalling these components and ensuring proper orientation, alignment and torque specifications are followed. Proper cleaning and lubrication of parts is emphasized to prevent wear and damage.
Caterpillar Cat 323D SA Excavator (Prefix NES) Service Repair Manual (NES0000...djdksmmdmd
The document provides instructions for removing and installing the flywheel and flywheel housing on a C6.4 engine. It describes removing the muffler, crankshaft position sensor, bolts securing the flywheel, and installing lifting tools to remove the flywheel. It also details removing the flywheel housing bolts and oil seal, checking dowels and installing a new gasket and housing. Reinstallation involves installing the oil seal, flywheel housing, flywheel, crankshaft position sensor and muffler.
John Deere 113 172 Clipper Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for the 5E and 2BV blowers, including engine details like displacement, bore, stroke, compression ratio, carburetor, lubrication, fuel, idle and operating speeds, starter, ignition system, spark plug, magneto air gap, fuel tank capacities, and blower type. It also lists the 113 and 172 hedge clippers and 110G, 210G, 240G, and 260G trimmers but does not provide details for those machines.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 314F excavator. It outlines 16 steps to disassemble the final drive, removing components like the sprocket, traction control valve, and barrel assembly. It then details 14 steps to disassemble the counterbalance valve, removing springs, spools, and relief valves. Finally, it lists 10 steps to disassemble the travel motor, removing pistons, guides, plates and the barrel assembly. Safety notices are included throughout to warn of potential injuries from parts or released pressures.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Clark arranges parts and service procedures by standard- You can quickly locate a specific point in the manual by
ized Groups. In this manual, Groups are similar to “chap- using the headers and footers that appear on every Section
ters.” Groups are listed in the indexes on the next page. page. The following illustration points out these areas.
Each Group begins with a table of contents that shows the
Sections contained within the Group. Lengthy Sections
also begin with a table of contents.
GroupID
Each Group and Section has an identifying name and
number, or “ID.”
Each Section page also has a unique ID. The page ID
consists of three numbers separated by hyphens. The three
numbers represent the Group number, the Section number,
and the page number. For example, “OO-l-2” on the lower
corner of the page indicates Group 00, Section 1, Page 2.
PageID
Section ID’ ManualID ’ Section ID
The Group number sometimes has a letter or letters added
to it in parentheses if one or more variations of the Group
exist. For example, if the truck has a standard transaxle,
Group 06 is expressed as “06(S);” if the truck has a hydro-
static transmission, Group 06 is expressed as “06(H).”
This manual is intended for the use of trained service
personnel. Please read Group SA, “Safe Maintenance,”
and the Operator’
s Manual before working on or operat-
ing the truck.
0 Copyright Clark Material Handling 1996 SM 612, Jun ‘
97
3. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CONTENTS
Contents of this Manual
Group Index
Group SA. Safe Maintenance
Group PS. Periodic Service
Group 00. Engines
Group 01. Cooling System
Group 02. Fuel System
Group 03. Air Induction System
Group 06. Transmission
Group 12. Ignition System
Group 13. Instrument Pod
Group 14. Electrical System
Group 22.
Group 23.
Group 25.
Group 26.
Group 29.
Group 30.
Group 32.
Group 34.
Group 38.
Group 40.
Wheels and Tires
Brake System
Steering Column and Gear
Steer Axle
Hydraulic Pump, Sump, and Filters
Hydraulic Control Valve/Lift Circuit
Tilt Cylinders
Uprights
Counterweight, Sheet Metal, & Chassis
Specifications
Alphabetical Index
(SEE NEXT PAGE)
Pictorial Index
Group 34. Uprights
Group 06. Transmission
/
/’
Group 32. Tilt Cylinders
Group 23. Brake/Inching System
Group 30. Hydraulic Control Valve
Group 29. Hydraulic Pump, Sump,
Group 03. Air Induction System
“‘
,,,Group 12. Ignition System
Sheet Metal, & Chassis
Group 26. Steer Axle
SM 612, Jun ‘
97 Contents-l
4. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Alphabetical Index
Air Induction System
Alternator
Brake System
Carburetor
Cooling System
Counterweight
Drive Axle
Electrical System
Engines
Fuel System
Hydraulic Control Valve
Hydraulic Pump, Filters
Inching System
Instrument Panel (Pod)
Jacking & Blocking
Lift Cylinder
Oil Change
Planned Maintenance
Radiator
Safety
Sheet Metal, & Chassis
Shop Supplies
Specifications
Starter
Steer Axle
Steering Column and Gear
Tilt Cylinders
Transmission
Tune-Up
Uprights
Water Pump
Wheels/Tires
Group 03
Group 14
Group 23
Group 02
Group 01
Group 38
Group 06
Group 14
Group 00
Group 02
Group 30
Group 29
Groups 23,06
Group 13
Group SA
Group 34
Group 00
Group PS
Group 01
Group SA
Group 38
Group 40
Group 40
Group 14
Group 26
Group 2.5
Group 32
Group 06
Group 00
Group 34
Groups 01,OO
Group 22
Contents-2 SM 612, Jun ‘
97
5. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
GROUP PS
PERIODIC SERVICE
Maintenance Schedules .................................................. Section 1
The Planned Maintenance Program ............................. Section 2
The PM Inspection Form ............................................... Section 3
SM 612, Jun ‘
96 Periodic Service
6. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CIRRK Group PS, Periodic Service
Sect ion 1.
Maintenanc e Schedules
“PeriodicService”and “Planned
Maintenance”
The term “periodic service” includes all maintenance tasks
that should be performed on a regularly scheduled basis.
The term “Planned Maintenance” indicates a formalized
program of basic inspections, adjustments, and lubrications
that the Clark service organization provides customers at a
prescribed interval, usually 50-250 hours. The recommended
basic “Planned Maintenance” procedure is given in Section
2 of this Group.
The current Section,“Maintenance Schedules,” specifies
all maintenance tasks-including Planned Maintenance
tasks-that should be performed periodically, and suggests
intervals at which they should be performed.
DeterminingMaintenanceIntervals
Time intervals on the charts on the next four pages and
elsewhere in this manual relate to truck operating hours as
recorded on the hourmeter, and are based on experience
Clark has found to be convenient and suitable under nor-
mal operation. Standard operating condition classifications
are:
Normal Operation: Eight-hour material handling, mostly
in buildings or in clean, open air on clean, paved surfaces.
Severe Operation: Prolonged operating hours or constant
usage.
Extreme Operation:
In sandy or dusty locations, such as cement plants,
lumber mills, and coal dust or stone crushing sites.
High-temperature locations, such as steel mills and
foundries.
Sudden temperature changes, such as constant trips
from buildings into the open air, or in refrigeration
plants.
If the lift truck is used in severe or extreme operating
conditions, the maintenance intervals should be shortened
accordingly.
IMPORTANT
MAINTENANCE INTERVALS. If the lift
truck is used in severe or extreme operat-
ing conditions, the maintenance intervals
should be shortened accordingly.
Since the operating environments of lift
trucks vary widely, the above descriptions
are highly generalized and should be ap-
plied as actual conditions dictate.
SM 612, Jun ‘
96 Maintenance Schedules l PSI-1
7. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service CICIRK
Service Chart/Lubrication Points
A decal, similar to the illustration below, is located on the
underside of the truck’
s engine cover. This decal is a basic
guide to periodic maintenance intervals and tasks. A more
detailed chart is supplied on the next page.
Every 8 - 10 hours or daily
Every 50 - 250 hours or monthly
____---_---------------- ---_
/ ’
EVI 450 - 500 hours or eves months
--- ’,
-- -- ---
/ /-- Evey900 6 months --L
-
I i _ --------1000 hours or every ---
,
’ I
I”
/
Every 2000 hours or every year
0 Check I Lubricate Change or Replace Clean / Air Clean
0 Drain / Flush
0
Check
0 Monitor Indicator Lights
and Service as Required
A - Engine Oil 15W40 B - Hydraulic Oil C - Engine Coolant D - MP Grease E - Transaxle Fluid
API, CC, CD / SG, SF Clark # 2776239 50 / 50 Mixture NLG#2 Clark # 2776236
l intervals refer to elapsed hour meter time and are based on Clark’
s experience found to be suitable and convenient
under normal operating conditions.
l Service and Maintain as per Service and Operator Manuals. Special or harsh conditions may need additional intervals.
PSl-2 . MaintenanceSchedules SM 612, Jun ‘
96
8. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CIRRK Group PS, Periodic Service
Recommended Periodic Service Schedule
Thischart lists maintenance tasks that should be done
periodically, the suggested time intervals, and the service
manual Group in which the task is covered. Apply as
appropriate for diesel, gas, and LFG trucks. Operators shou
refer to Operator’
s Manual for Daily Checks.
* Oil change interval may be determined by laboratory analysis
SM 612, Jun ‘
96 Maintenance Schedules l PS-1-3
9. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service elmu
Air filter element - replace
Air hoses/clamus - insnect
Group 02 - Air Intake & Exhaust
I I
.
I I
I .
1 Exhaust pipe/muffler - inspect l I l I I I I
Air vent - inspect, clean or replace
on standard transaxle
Group 06 - Transaxle
.
Axle end lube - clean/repack During brake repairs
Axle mounting bolts - inspect/tightej
Charging pump - stall test standard
transaxle
Clutch pack operation - stall test
standard transaxle
Pressure checks
.
.
.
.
Fluid change - dram/fill
Fluid filter - replace . .
Fluid level/condition - check/sample . .
Inching operation - check/test
Oil cooler / lines - inspect
Transmission strainer - clean on
.
.
.
standard transaxle I I I I I
Group Z2 - Ignition and Starting System i
Diesel cold starting plug - test
Distributor cap/rotor - inspect
Electronic ignition - test
.
.
.
Ignition timing - check/adjust
I . I
Ignition wiring - inspect I . I I
I Neutral start - check I . I
Parking brake interlock - check
Spark plugs - regap/replace
.
.
Starter motor - inspect/test
I I .
Starter solenoid - inspect/test I I I .
Hourmeter - check
Lamp check - at start-up
Wiring harness - inspect
I I I I I
Group 13 - Gauges, Indicators
.
.
.
Group 14 - Electrical: Alternator, Regulator, Battery
Alternator - inspect/test .
Alternator drive belts - inspect/adjust . .
Alternator output - test .
Battery electrolyte level - check/add
Battery condition - cranking voltage
.
.
test
Battery terminals/cables - .
clean/tighten
Group 22 - Wheels And Tires
Wheel mounting bolts - tighten I . I . I I I
Tire pressure/condition - check
I . I . I I
PS-1-4 l Maintenance Schedules SM 612, Jun ‘
96
10. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CIRRU Group PS, Periodic Service
Steer axle mounting - inspect
Steer wheel bearings - check
Steer wheel bearings -
lubricate/adjust
Steering cylinder seals - check
leakage
Steering linkage - lubricate
.
.
.
Group 29 - Hydraulic Pump, Sump, and Filter
Hydraulic fluid level/condition -
check/sample
Hydraulic fluid change - drain/fill
Hydraulic suction screen - clean
Hydraulic fluid filter - replace
.
.
.
. .
Hydraulic tank breather - . .
clean/replace
Group 30 - Hydraulic Valve & Linkage
Hydraulic system relief pressure - I I I I I .
test/adjust I I I I I
Group 32 - Tilt Cylinders
Tilt cylinder adjustment - .
check/adjust
Tilt cylinder drift - test .
Tilt cylinder mounting - .
check/tighten
Tilt cylinder rod ends - .
check/tighten/lubricate
Tilt cylinder rod/seals - check for .
leaks
SM 612, Jun ‘
96 Maintenance Schedules l PS-1-5
11. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service
Section 2.
The Planned Maintenance Program
This Section defines a set of basic service procedures, known as the “Planned
Maintenance Program,” and describes a systematic approach for performing them.
Introduction to Planned Maintenance ......................................................................................... 2
PM Intervals ..................................................................................................................................... 2
ThePMFotm... . _
. . ............................................................................................................................ 2
The Basic PM Procedures .............................................................................................................
2
The Recommended PM Task Chart ................................................................................................ .3
Visual Inspection ............................................................................................................................. 4
Decals, Fasteners, and Leaks ................................................................................................... .4
Overhead Guard ....................................................................................................................... .4
Carriage, Load Backrest, and Upright ..................................................................................... .4
Forks ......... ................................................................................................................................ 4
Brake and Inching Pedal Freeplay ........................................................................................... .5
Wheels and Tires ..................................................................................................................... .5
Functional Tests ............................................................................................................................... 5
Starting System ......................................................................................................................... 5
Engine Shut Down Mode.. ....................................................................................................... .5
Parking Brake Interlock.. ......................................................................................................... .5
Accelerator, Brake/Inching System, Direction Control, and Parking Brake ........................... .6
Steering System ....................................................................................................................... .6
Lift Mechanisms and Controls.. ............................................................................................... .7
Auxiliary Controls .................................................................................................................... 7
Air Cleaning the Truck ................................................................................................................... .7
Truck Chassis Inspection and Lubrication.. ..................................................................................... 8
Lift Chain Lubrication .................................................................................................................... .8
Upright and Tilt Cylinder Lubrication ............................................................................................. 8
Under-the-Hood Inspection ............................................................................................................. 8
General Checks ......................................................................................................................... 8
Engine Air Cleaner ................................................................................................................... 8
Fluid Checks .................................................................................................................................... 8
Battery.. ..................................................................................................................................... 8
Engine Cooling System ........................................................................................................... .9
Engine Oil Check.. .................................................................................................................... 9
Hydraulic Fluid Level .............................................................................................................. .9
Transaxle Fluid Level .............................................................................................................. .9
Stall Tests ......................................................................................................................................... 9
Cranking Voltage Test ..................................................................................................................... 9
Critical Fastener Torque Checks.. ................................................................................................... .9
SM 612, Jun ‘
96 Planned Maintenance l PS-2-1
12. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service ClClRK
Introduction to Planned Maintenance The Basic PM Procedures
A program of regular, routine inspections, lubrication, and
other service tasks is important for the long life and trouble-
free operation of the lift truck.
The Clark service organization offers customers a formal-
ized program-called Planned Maintenance, or PM-for
performing these tasks.
The chart on the next page lists the basic PM tusks. The
actual PM program may be modified to meet the spe-
cific needs of the truck application.
The procedures beginning on page 4 outline a systematic
approach to performing the PM tasks. These procedures
consist of:
PM Intervals
The PM inspections, adjustments, and lubrications are typi-
cally performed on each covered truck at 50-250 hour
intervals. (See Section 1, in this Group about defining
service intervals.)
External visual checks you make as you walk around
the truck with it turned off.
Operational checks you make while operating the
truck.
Tests, adjustments, and lubrication you perform
with the covers removed.
The PM Form
As an aid to service technicians performing and document-
ing PM inspections, Clark has prepared a “Gas, LPG or
Diesel Planned Maintenance Report” form. A black-and-
white copy of this form is inserted in Section 3 of this
Group.
A
! CAUTION
l Do not make repairs or adjustments un-
less authorized to do so.
We recommend that you use this form as a checklist and to
make a record of your inspection and truck condition. This
record can be used to inform the owner of needed repairs
and help establish the optimal PM intervals.
When you have finished the PM inspections, be sure to give
a copy of the report to the person responsible for lift truck
maintenance.
l Disconnect the battery ground cable (-)
from the engine or frame before work-
ing on electrical components.
l Always wear safety glasses.
l Wear a safety (hard) hat in industrial
plants and in special areas where protec-
tion is necessary or required.
l Remove all jewelry (watch, rings, brace-
lets, etc.) before working on the truck.
PS-2-2 l Planned Maintenance SM 612, Jun ‘
96
13. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service
The Recommended PM Task Chart
Listed by Service Manual Group
Group PS - The Basic PM Procedures
Lubrication, filters, and fluid levels checks
Critical fasteners torque check
Group 00 - Engine
Exhaust smoke (blue-oil; black-fuel)
Mounts / brackets - insnect/tighten
Distributor ca /rotor - ins ect
~~
Hourmeter - check
Indicator lights - check
Wiring harness - inspect
Group 14 - Alternator, Battery, Starter
Alternator - inspect/test
Alternator drive belts - inspect/adjust
Alternator output - test
Battery condition - performance load test
Battery electrolyte level - check/add
Battery terminals/cables - clean/tighten
Neutral start - check
21
Tire ressure/condltlon - check
SM 612, Jun ‘
96 Planned Maintenance l PS-2-3
14. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service CWRK
Visual Inspection Carriage, Load Backrest, and Upright
First, perform a visual inspection of the lift truck and its
components. Walk around the truck and take note of any
obvious damage and maintenance problems.
(See Group 34 for detailed inspection procedure.)
Inspect the welds on the carriage, load backrest, and up-
right for cracks. Be sure that the mounting fasteners are in
place and tight.
Decals, Fasteners, and Leaks
Check for loose fasteners and fittings.
Check to be sure all capacity, safety, and warning plates
and decals are attached and legible.
NOTICE
Do not operate a lift truck with damaged
or missing decals and nameplates. Replace
them immediately. They contain important
information. See Group 40 for decal loca-
tions.
Inspect the truck before and after starting engine for any
signs of external leakage: fuel, engine oil or coolant, trans-
mission fluid, etc.
Check for hydraulic oil leaks and loose fittings. DO NOT
USE BAKE HANDS TO CHECK.
A
! CAUTION
HYDRAULIC FLUID PRESSURE. Do not
use your hands to check for hydraulic leak-
age. Oil may be hot or under pressure.
Fluid under pressure can penetrate your
skin and cause serious injury.
Overhead Guard
Be sure that the overhead guard and any other safety de-
vices are in place, undamaged, and attached securely. In-
spect welds and structural members for cracks or other
damage. Also check for loose or missing fasteners. Do not
operate with a damaged overhead guard.
Inspect the upright assembly: rails, carriage rollers, car-
riage fork bars, lift chains, and lift and tilt cylinders. Look
for obvious wear and maintenance problems and damaged
or missing parts. Check for any loose parts or fittings.
Check for leaks, any damaged or loose rollers and rail wear
(metal flaking). Carefully check the lift chains for wear,
rust and corrosion, cracked or broken links, stretching, etc.
Check that the lift and carriage chains are correctly ad-
justed to have equal tension. Check that the lift chain
anchor fasteners and locking means are in place and tight.
Be sure all safety guards and chain retainers are in place
and not damaged. Inspect the carriage stops and cylinder
retainer bolts. Check all welded connections.
Inspect all lift hydraulic connections for leaks. Check the
lift cylinder rods for wear marks, grooves and scratches.
Check the cylinder seals for leaks.
Overhead 7
Upright
Forks
Inspect the load forks for cracks, breaks, bending and wear
as described in Group 34.
A WARNING
HEEL WEAR. If the fork blade at the heel
is worn down by more than lopercent, the
load capacity is reduced and the fork must
be replaced. See Group 34 for inspection
procedures.
PS-2-4 l Planned Maintenance SM 612, Jun ‘
96
15. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service
Inspect the fork latches to ensure that they are in good
condition, operate freely, and lock correctly.
Wheels and Tires
Check the condition of the drive and steer wheels and tires.
Remove objects that are embedded in the tread. Inspect the
tires for excessive wear or breaks or “chunking out.”
Check all wheel lug nuts or bolts to be sure none are loose
or missing. Have missing bolts or lug nuts replaced and
tightened to correct torque as explained in Group 22.
A WARNING
Check tire pressure from a position facing the
tread of the tire, not the side. Use a long-
handled gauge to keep your body away. If
tires are low, the tire may require removal
and repair. Incorrect (low) tire pressure can
reduce truck stability. See “Specifications” in
Group 22 for proper inflation pressure.
Brake and Inching Pedal Freeplay
There should be no inching or braking pedal freeplay. Both
pedals should be at same the height. Adjust as described in
Group 23.
Functional Tests
Be sure that:
l Parking brake is applied
l Directional control is in “N” (neutral).
Test the horn, lights, and all other safety equipment. Be
sure they are properly mounted and working correctly. Test
all controls to ensure that they operate freely and return to
neutral properly.
Now prepare to start the truck and test its operation.
Starting System
A 3-position starter switch is standard equipment.
Check the neutral start function by placing the direction
control lever in forward or reverse and turning key switch
to “start” position. The starter must not engage until the
direction control lever is moved to “neutral” position.
As you start the engine, check the instrument display. All
indicator lights should come on for a 2-second lamp check.
The seat belt prompt light should remain on for 4 seconds,
accompanied by a buzzer sound. The parking brake light
should remain on if the brake is set. If the truck has a diesel
,,::r,, engine, the glow plug preheat light
,,,,, ‘
I
‘
L, ,,
‘
5,
@
should remain on for 6 seconds. If
‘
,,,; ‘
,:
,,,,) ;,;,,, ,, ‘
,;
.G” ”
,,’
’ ‘
$, :; c; the lights do not operate as described,
; ___.___
___;
! 5, :j
/ ___________
I i,,,,,;
refer to Group 13 to diagnose the
II problem.
Engine Shut Down Mode
If the truck’
s fault protection system detects low engine oil
pressure, excessive transmission oil temperature, or exces-
sive engine coolant temperature, the truck will go into
“shutdown mode”-a buzzer will sound for 30 seconds,
after which the truck will shut itself off. The truck may be
restarted, but if the fault condition still exists, the engine
will again shutdown in 30 seconds.
Parking Brake Interlock
The transmission should disengage when the parking brake
is on and reengage when the parking brake is released.
1.
2.
3.
4.
5.
Apply the parking brake.
Start the engine, if it is not already running.
Place the direction control in forward or reverse. Make
sure the path is clear in the chosen direction.
Accelerate briefly. The truck should not move or put any
strain on the parking brake if the interlock system is OK.
Release the parking brake (and service brake). Truck
should move slowly in selected direction. (On hydro-
static truck, depress accelerator pedal slightly.)
SM 612, Jun ‘
96 Planned Maintenance l PS-2-5
16. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service EMRK
Accelerator, Brake/Inching System, Direction Control,
and Parking Brake
A WARNING
Fasten your seat belt before driving the
truck.
Make sure the truck is on a level surface, the travel area is
clear in front of the truck, the parking brake is released, and
the engine is running.
1.
2.
3.
4.
5.
6.
Push the brake (right) pedal down fully and hold The
brakes should apply before the pedal reaches the
floorplate. If the pedal continues to creep downward,
report the failure immediately. Do not operate the
truck until the brakes are repaired.
MovethedimctioncontrolleverfromneutraltoforwanL
Release the brake pedal and let the truck travel slowly
forwardThenpushdownonthebrakepedaltostopthe
truck. The brakes should apply smoothly and equally.
Be sure the travel area is clear behind the truck. Repeat
steps 2 through 4 in the reverse direction.
Drive the truck and check that it accelerates and
decelerates smoothly and stops properly.
Depress the inching (left) pedal and depress the accel-
erator to see if the transmission disengages properly.
Direction
Control
Parking Brake
inching Pedal
7. Check the function of the parking brake. Park the truck
on a grade and apply the parking brake to three clicks
of the pedal. The parking brake should hold a lift truck
with rated load on a 15% grade.
n ! CAUTION
If the service brake, parking brake, or in-
terlock is not operating properly, take the
truck out of service until it is repaired.
Steering System
Check the steering system by moving the steering handwheel
in a full right turn and then in a full left turn. Return the
steer wheels to the straight-ahead position. The steering
system components should operate smoothly when the steer-
ing handwheel is turned. Hard steering, excessive play
(looseness), or unusual sounds when turning or maneuver-
ing indicates a need for inspection or servicing.
If the truck has a steering system fault, take the truck
out of service until it is repaired.
Lift Lever
Tilt Lever
Aux Lever
Brake Pedal
Accelerator
PS-2-6 l PlannedMaintenance SM 612, Jun ‘
96
17. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
C1RRK Group PS, Periodic Service
Lift Mechanisms and Controls
(See Group 34 for detailed test procedure.)
1.
2.
3.
Check the function of the lift system and controls with
the engine running.
Pull back on the tilt control lever and hold until the
upright reaches the full back tilt position. Push for-
ward on the lever to return the upright to the vertical
position. Release the lever.
If there is excessive play between rails and channels,
upright adjustment is required. If there is racking,
adjustment of the cylinder rod yokes is required.
n
! CAUTION
Be sure that there is adequate overhead
clearance before raising the upright.
Pull back on the lift control lever and raise the fork
carriage to full height. Watch the upright assembly as
it rises. All movements of the upright, fork carriage,
and lift chains must be even and smooth, without
binding or jerking. Watch for chain wobble or loose-
ness; the chains should have equal tension and move
smoothly without noticeable wobble.
4.
Release the lever. Control levers should not stick and
should return to neutral when released.
A CAUTION
Do not put hands in upright.
If the maximum fork height cannot be reached, this
indicates there is low oil level in the hydraulic sump
or severe binding within the upright.
Push forward on the lift control lever. Watch the
upright as it lowers. Lowering should be smooth and
even. If you suspect a problem with lifting or lowering
speeds, refer to Group 34 to diagnose the problem.
Auxiliary Controls
If the truck is equipped with an attachment, test the control
lever for correct function and operate the attachment to
check its function
When you have completed the operational tests, park
and leave truck according to standard shutdown proce-
dures. Be sure to make a record of all maintenance and
operating problems you find.
Air Cleaning the Truck
n
! CAUTION
Wear suitable eye protection and protec-
tive clothing.
Remove floorplate, then air clean the following: upright
assembly, drive axle, radiator from both counterweight and
engine sides, engine and accessories, driveline and related
components, and steer axle and steer cylinder.
Use an air hose with special adapter or extension that has a
control valve and nozzle to direct the air properly. Use
clean, dry, low-pressure compressed air. Restrict air pres-
sure to 30 psi (207 kPa), maximum. (OSHA requirement).
It is important to maintain a lift truck in a clean condition.
Do not allow dirt, dust, lint or other contaminants to accu-
mulate on the truck. Keep the truck free from leaking oil
and grease. Wipe up all oil or fuel spills. Keep the controls
and floorboards clean, dry, and safe. A clean truck makes it
easier to see leakage, loose, missing, or damaged parts, and
will help prevent fires. A clean truck will run cooler.
The environment in which a lift truck operates determines
how often and to what extent cleaning is necessary. For
example, trucks operating in manufacturing plants which
have a high level of dirt, dust or lint, (e.g. cotton fibers,
paper dust, etc.) in the air or on the floor or ground, require
more frequent cleaning. The radiator, especially, may re-
quire daily air cleaning to ensure correct cooling. If air
pressure does not remove heavy deposits of grease, oil, etc.,
it may be necessary to use steam or, liquid spray cleaner.
SM 612, Jun ‘
96 Planned Maintenance l PS-2-7
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service emu
Truck Chassis Inspection and Lubrication Under-the-Hood Inspection
Lubrication requirements are given in the “Service Chart/
Lubrication Points” chart in Section 1 of this Group. Also
see Lubricants and Shop Supplies” in Group 40 for parts
information, and “General Specifications” in Group 40 for
lubricant specifications.
General Checks
Check all fluid levels and make sure that the following
items are clean, secure, and in good condition:
Lubrication and inspection of truck chassis components
includes steer wheels, steer axle linkages, and steer wheel
bearings, and drive wheel bearings. To check these items,
the truck must be properly raised and blocked as described
in “Lifting, Jacking, and Blocking” in Group SA.
Check for play in wheel bearings by attempting to move
the wheel side to side and up and down, by hand.
Hoses, lines, clamps, andfittings
Wires, cables, and connectors
Distributor, distributor cap, and rotor, coil, and plug
wires (gas/LPG/CNG engine only)
Control linkages, pedals, and levers
Engine mounts
Fan and fan belts
Oil filler cap
Steering gear (check for leaks).
Inspect the steering cylinder piston rods, seal, and fasteners
for damage and leaks, and looseness.
Check linkages by observing whether the steer wheels lag
when you turn the handwheel.
Lubricate the steer axle linkage rod ends and pivot points.
Be sure to clean the grease fittings before lubricating.
Remove the excess grease from all points after lubricating.
Lubricate miscellaneous linkage as needed.
n
! CAUTION
To avoid the possibility of personal injury,
never work in engine compartment with
engine running except when absolutely nec-
essary to check or make adjustments. Take
extreme care to keep face, hands, tools,
loose clothing, etc., away from fan and drive
belts. Also, remove watches, bracelets, and
rings. Do not smoke.
Upright and Tilt Cylinder Lubrication
Clean the fittings and lubricate the tilt cylinder rod end
bushings (forward end). Clean the fittings and lubricate
the tilt cylinder base rod end bushings (rear end). Clean
and lubricate the upright trunnion bushings.
Lift Chain Lubrication
Lubricate the lift chains as described in Group 34.
Engine Air Cleaner
Do not open the air cleaner to check the filter element. The
filter element should be replaced only at the specified
service interval or when the air filter light indicates that it is
dirty.
Fluid Checks
Battery
Inspect the battery for any damage, cracks, leaking condi-
tion, etc. If the terminals are corroded, clean and protect
them with CLARK Battery Saver (available from your
Clark dealer). If the battery has removable cell caps, check
to be sure the cells are all filled. If necessary, refill with
distilled water.
PS-2-8 l Planned Maintenance SM 612, Jun ‘
96
20. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Group PS, Periodic Service
Engine Cooling System
Check coolant level in the coolant recovery bottle and in
the radiator as described in Group 01.
A CAUTION
STEAM. Do not remove the radiator cap
when the radiator is hot. Steam from the
radiator will cause severe burns.
Coolant should be checked on a daily basis.
Engine Oil
Oil Level: With the truck level and the engine shutdown
for at least 5 minutes, check the engine oil level.
Locate the engine oil dipstick. Pull the dipstick out, wipe it
with a clean wiper and reinsert it fully into the dipstick
tube. Remove the dipstick and check oil
FULL
level.
It is normal to add some oil between oil changes. Keep the
oil level above the ADD mark on the dipstick by adding oil
as required. Use only the oil specified in Group 00.
Oil Change: Change oil as described in Group 00.
Diesel Engine Oil Filter: Replace as described in Group
00.
HydraulicFluid Level
Check the hydraulic sump tank fluid level as described in
Group 29. Correct fluid level is important for proper sys-
tem operation. Low fluid level can cause pump damage.
Overfilling can cause fluid leakage.
Hydraulic fluid expands as its temperature rises. Therefore,
it is preferable to check the fluid level at operating tempera-
ture (after approximately 30 minutes of truck operation).
Fill the oil level above the LOW mark on the dipstick by
adding only the hydraulic fluid prescribed in Group 29.
DO NOT OVERFILL.
TransaxleFluid Level
Check the transaxle fluid level with the engine running and
transmission AT NORMAL OPERATING TEMPERA-
TURE, as explained in Group 06.
Fill to the FULL mark on the dipstick, using the transaxle
fluid specified in Group 06. DO NOT OVERFILL.
Low Full
Stall Test
On standard transaxle trucks, perform the stall test de-
scribed in Group 00 to determine engine and transaxle
condition.
Cranking Voltage Test
To determine battery condition, check the cranking voltage
as described in Group 14.
Critical Fastener Torque Checks
For safety it is important that the correct torque be main-
tained on all critical fasteners of components which directly
support, handle or control the load and protect the operator.
Check torque of critical items, including:
Drive axle mounting
Drive and steer wheel mounting
Counterweight mounting
Overhead guard mounting
Operator’
s cell mounting
Tilt cylinder mounting and yokes
Upright mounting and components.
Critical fastener torque specifications are given in the gen-
eral specifications Section of Group 40.
SM 612, Jun ‘
96 Planned Maintenance l PS-2-9
21. Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CMRK Group PS, Periodic Service
Section 3.
The PM Form
As an aid to service technicians performing and document-
ing PM inspections, Clark has prepared a “Gas, LPG or
Diesel Planned Maintenance Report” form, a sample of
which is inserted behind this page.
We recommend that you use this form as a checklist and to
make a record of your inspection and truck condition.
Please note the special coding system for indicating the
importance of needed repairs and/or adjustments.
SM 612, Jun ‘
96 The PM Form l PM-3-1