The document is a repair manual that provides instructions for repairing various components of CLAAS Dominator 108 VX, 98 VX, and 88 VX combine harvesters. It includes sections on the operator's platform, threshing mechanism, cleaning systems, and other areas. The manual provides detailed steps for removing, dismantling, installing, and assembling parts. It also includes exploded diagrams and specifications to aid in repairs.
This document is the preface to "The Python Workbook" by Ben Stephenson. It introduces the purpose and structure of the book, which is to provide hands-on programming exercises in Python that can be solved using introductory Python concepts. The preface explains that approximately half of the 174 exercises include sample solutions to encourage learners to check their work and learn good programming practices. Learners can use the book to supplement another textbook or as a stand-alone resource for learning Python through practice exercises.
CONTROL ESTADÍSTICO DE LA CALIDAD Y SEIS SIGMA 3DA ED.pdfJuanalvarez903617
Este documento presenta una revisión de la tercera edición de un libro clásico sobre métodos de calidad y Seis Sigma. Se realizaron actualizaciones y ampliaciones de varios temas, como distribuciones de probabilidad, pruebas de hipótesis para proporciones y cartas de control para procesos autocorrelacionados. También se actualizó un análisis de modos y efectos de falla y se renovaron las explicaciones sobre software estadístico.
This is the user manual of Innova 3160e.
>> READ MORE: https://www.obdadvisor.com/innova-scan-tools/
Here is a detailed review of the best Innova scanners based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the scanner.
Rao probability theory with applicationsCaboGrosso
This document appears to be the contents page and preface for a textbook on probability theory titled "Probability Theory with Applications, Second Edition".
The preface discusses the organization of the textbook into three parts - foundations of probability theory, analytical aspects of probability, and applications of probability. It notes some revisions made for the second edition, including adding new material, omitting some original chapters, and reorganizing content for clearer focus. The goal remains providing a rigorous yet accessible graduate-level introduction to probability theory.
This document is the preface to "The Python Workbook" by Ben Stephenson. It introduces the purpose and structure of the book, which is to provide hands-on programming exercises in Python that can be solved using introductory Python concepts. The preface explains that approximately half of the 174 exercises include sample solutions to encourage learners to check their work and learn good programming practices. Learners can use the book to supplement another textbook or as a stand-alone resource for learning Python through practice exercises.
CONTROL ESTADÍSTICO DE LA CALIDAD Y SEIS SIGMA 3DA ED.pdfJuanalvarez903617
Este documento presenta una revisión de la tercera edición de un libro clásico sobre métodos de calidad y Seis Sigma. Se realizaron actualizaciones y ampliaciones de varios temas, como distribuciones de probabilidad, pruebas de hipótesis para proporciones y cartas de control para procesos autocorrelacionados. También se actualizó un análisis de modos y efectos de falla y se renovaron las explicaciones sobre software estadístico.
This is the user manual of Innova 3160e.
>> READ MORE: https://www.obdadvisor.com/innova-scan-tools/
Here is a detailed review of the best Innova scanners based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the scanner.
Rao probability theory with applicationsCaboGrosso
This document appears to be the contents page and preface for a textbook on probability theory titled "Probability Theory with Applications, Second Edition".
The preface discusses the organization of the textbook into three parts - foundations of probability theory, analytical aspects of probability, and applications of probability. It notes some revisions made for the second edition, including adding new material, omitting some original chapters, and reorganizing content for clearer focus. The goal remains providing a rigorous yet accessible graduate-level introduction to probability theory.
Este documento apresenta conceitos fundamentais sobre robótica industrial, incluindo:
1) As principais partes de um manipulador robótico e sua classificação.
2) Os diferentes tipos de manipuladores com base em sua estrutura cinemática.
3) Sistemas de coordenadas e transformações geométricas usadas para modelar a cinemática dos manipuladores.
1) O documento descreve vários modelos de redutores, incluindo suas potências, torque máximo, eficiência e rotações por minuto.
2) Os redutores funcionam por transmissão de eixo sem-fim e coroa, permitindo reduções entre 1x7,5 até 1x100.
3) As várias formas construtivas proporcionam durabilidade e qualidade, aliadas a uma geometria avançada de engrenamento.
Kocali Üniversitesi Mühendislik Yönetimi, Yüksek Lisans dalı bitirme ödevi olarak hazırlanmıştır. Personel Taşıma (servis taşımacılığı) sektörüne genel ve temel bir inceleme sunmaktadır.
O documento fornece informações técnicas sobre motores de combustão interna, descrevendo seu funcionamento, principais componentes e possíveis falhas. É dividido em seções tratando de tópicos como pistões, anéis, camisas, válvulas e outros componentes, explicando seu objetivo, tecnologia e causas comuns de falhas precoces.
This document discusses permutation puzzles and their connection to group theory. It specifically examines three puzzles: the Rubik's Cube, Pyraminx, and Megaminx. For the Rubik's Cube, it provides the history, establishes notation for the sides, cubies (pieces), and basic moves, and discusses how the cube's moves form a non-abelian group with specific structure and properties. The Pyraminx and Megaminx are similarly introduced, with notation and an overview of how their moves relate to group theory.
This document provides an overview of trading on the National Stock Exchange (NSE) of India. It discusses the NEAT trading system, different market types, corporate hierarchy, market phases, logging on/off procedures, various inquiry screens for viewing market data and placing orders, order management processes like order entry, modification and cancellation, trade management, the auction market, and downloading trading information. It also describes functions like limited physical market, retail debt market, internet broking and contains sample questions.
Este documento fornece uma introdução abrangente sobre geradores de vapor, discutindo definições, componentes, princípios de funcionamento e classificações de caldeiras. É dividido em cinco partes, cobrindo tópicos como combustão, características da água, NR-13 e operação e manutenção de caldeiras.
Este documento presenta un libro sobre contabilidad de costos. Explica conceptos clave como costo de producción, estructura organizacional, centros de costo, clasificación de costos y estado de costos de producción y ventas. El libro analiza elementos del costo de producción como materia prima, mano de obra, costo hora-hombre y sus métodos de valuación. El objetivo es proporcionar una guía para el registro, medición y reporte de costos en una empresa.
TEREX TELELIFT 2506 GLADIATOR AGRILIFT TELESCOPIC HANDLER Service Repair Manualjksebmdmn
This document is a workshop manual that provides instructions for routine and extraordinary maintenance of machines in the Telelift, Gladiator, and Agrilift series. It contains sections on general information, safety regulations, technical specifications, maintenance procedures, troubleshooting, and repair instructions for various components. The manual lists required tools and equipment, torque specifications for fasteners, and other technical details to support safe and proper maintenance of the machines.
This document contains a table of contents listing various power tools, hand tools, and accessories. It includes sections for cordless power tools, corded power tools, and hand tools. The sections list specific tool types like drills, saws, sanders, clamps, hammers and more. The document provides a categorized listing of the tools and products available.
This document discusses translational and rotational mechanical systems. It begins by defining variables for translational systems like displacement, velocity, acceleration, force, work, and power. It then discusses element laws for translational systems including viscous friction and stiffness elements. The document also introduces rotational systems and defines variables like angular displacement, velocity, acceleration, and torque. It discusses element laws for rotational systems including moment of inertia, viscous friction, and rotational stiffness. Finally, it covers interconnection laws for both translational and rotational systems and provides an example of obtaining the system model for a rotational system.
L'opportunité d'une révision de la directive 96/9/CE sur la protection juridi...Sidy JUSTE
Ce mémoire, rédigé seulement quelques semaines après la dernière évaluation de la directive 96/9/CE sur la protection juridique des bases de données, s’efforce de démontrer que ce texte peut jouer un rôle important dans l’économie de la donnée et qu’il convient d’étudier avec attention l’application des règles de la propriété intellectuelle appliquée aux données, matières premières de l’IA et de l’industrie 4.0 (Machine and sensor generated data).
Y sont également évoquées les questions de mutualisation et de partage de données entre acteurs (privés et publics), problématiques essentielles dans le cadre de la construction du Marché unique numérique et de la libre circulation des données au sein de l’UE. La doctrine française et européenne (notamment Allemande) y sont largement analysées.
Un résumé se trouve en fin de document. Un article issu de ce travail a été publié dans la lettre n°54 de l’Association Française de Gouvernement d’Entreprise (la version anglaise de cet article est disponible sur mon compte Linkedin).
Ce mémoire a fait l’objet d’une soutenance en juillet 2018 et le jury lui a attribué la note de 15/20 en soulignant la qualité des analyses, des propositions et du travail de recherche.
La investigación científica requiere tiempo y recursos para descubrir nuevos conocimientos y avanzar en el entendimiento de problemas complejos. Aunque el proceso puede ser lento, los descubrimientos científicos han mejorado vidas al desarrollar nuevos tratamientos médicos y tecnologías que resuelven desafíos. Con paciencia y apoyo continuo, la ciencia progresará para beneficiar a la humanidad.
The document discusses BGL's experience developing bearing bush and nut materials based on international standards. BGL's materials achieve higher tensile strength than required by standards. The materials also have strength superior to SAE 1020 carbon steel. BGL recommends nodular cast iron bushes for their superior characteristics but also manufactures carbon steel or stainless steel parts per customer requests. It then provides tables listing specifications for various bearing bush and nut products.
Este documento presenta una introducción y clasificación de varios nudos útiles. Inicia describiendo nudos de tope, que se usan para evitar que los extremos de una cuerda se deslice o deshilache. Luego describe nudos de empalme y ajustes para unir cuerdas, y gaza, que son nudos que forman bucles o lazos en una cuerda. Finalmente presenta otras categorías de nudos como corredizos, para acortar cuerdas, ligadas y vuelta, nudos de pesca y varios otros nudos. En total,
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manualufjjejfksekmme
This is the Highly Detailed factory service repair manual for theCLAAS LEXION 480 CAT NA COMBINE (TYPE 566), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Operator’s Platform
Threshing Mechanism
Cleaning Unit
Grain Delivery
Straw Discharge
Drives
Machine Body
Hydraulic System
Engine
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual.
Thanks for visiting!
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Safety information and specifications are also provided to aid technicians in maintenance and repairs.
CLAAS LEXION 480 Combine (Type 466) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing, disassembling, and installing various components like the air conditioner, steering column, threshing drum, sieves, and cleaning fan. Tightening torques and specifications are also provided.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdff8soekmdmdm
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Este documento apresenta conceitos fundamentais sobre robótica industrial, incluindo:
1) As principais partes de um manipulador robótico e sua classificação.
2) Os diferentes tipos de manipuladores com base em sua estrutura cinemática.
3) Sistemas de coordenadas e transformações geométricas usadas para modelar a cinemática dos manipuladores.
1) O documento descreve vários modelos de redutores, incluindo suas potências, torque máximo, eficiência e rotações por minuto.
2) Os redutores funcionam por transmissão de eixo sem-fim e coroa, permitindo reduções entre 1x7,5 até 1x100.
3) As várias formas construtivas proporcionam durabilidade e qualidade, aliadas a uma geometria avançada de engrenamento.
Kocali Üniversitesi Mühendislik Yönetimi, Yüksek Lisans dalı bitirme ödevi olarak hazırlanmıştır. Personel Taşıma (servis taşımacılığı) sektörüne genel ve temel bir inceleme sunmaktadır.
O documento fornece informações técnicas sobre motores de combustão interna, descrevendo seu funcionamento, principais componentes e possíveis falhas. É dividido em seções tratando de tópicos como pistões, anéis, camisas, válvulas e outros componentes, explicando seu objetivo, tecnologia e causas comuns de falhas precoces.
This document discusses permutation puzzles and their connection to group theory. It specifically examines three puzzles: the Rubik's Cube, Pyraminx, and Megaminx. For the Rubik's Cube, it provides the history, establishes notation for the sides, cubies (pieces), and basic moves, and discusses how the cube's moves form a non-abelian group with specific structure and properties. The Pyraminx and Megaminx are similarly introduced, with notation and an overview of how their moves relate to group theory.
This document provides an overview of trading on the National Stock Exchange (NSE) of India. It discusses the NEAT trading system, different market types, corporate hierarchy, market phases, logging on/off procedures, various inquiry screens for viewing market data and placing orders, order management processes like order entry, modification and cancellation, trade management, the auction market, and downloading trading information. It also describes functions like limited physical market, retail debt market, internet broking and contains sample questions.
Este documento fornece uma introdução abrangente sobre geradores de vapor, discutindo definições, componentes, princípios de funcionamento e classificações de caldeiras. É dividido em cinco partes, cobrindo tópicos como combustão, características da água, NR-13 e operação e manutenção de caldeiras.
Este documento presenta un libro sobre contabilidad de costos. Explica conceptos clave como costo de producción, estructura organizacional, centros de costo, clasificación de costos y estado de costos de producción y ventas. El libro analiza elementos del costo de producción como materia prima, mano de obra, costo hora-hombre y sus métodos de valuación. El objetivo es proporcionar una guía para el registro, medición y reporte de costos en una empresa.
TEREX TELELIFT 2506 GLADIATOR AGRILIFT TELESCOPIC HANDLER Service Repair Manualjksebmdmn
This document is a workshop manual that provides instructions for routine and extraordinary maintenance of machines in the Telelift, Gladiator, and Agrilift series. It contains sections on general information, safety regulations, technical specifications, maintenance procedures, troubleshooting, and repair instructions for various components. The manual lists required tools and equipment, torque specifications for fasteners, and other technical details to support safe and proper maintenance of the machines.
This document contains a table of contents listing various power tools, hand tools, and accessories. It includes sections for cordless power tools, corded power tools, and hand tools. The sections list specific tool types like drills, saws, sanders, clamps, hammers and more. The document provides a categorized listing of the tools and products available.
This document discusses translational and rotational mechanical systems. It begins by defining variables for translational systems like displacement, velocity, acceleration, force, work, and power. It then discusses element laws for translational systems including viscous friction and stiffness elements. The document also introduces rotational systems and defines variables like angular displacement, velocity, acceleration, and torque. It discusses element laws for rotational systems including moment of inertia, viscous friction, and rotational stiffness. Finally, it covers interconnection laws for both translational and rotational systems and provides an example of obtaining the system model for a rotational system.
L'opportunité d'une révision de la directive 96/9/CE sur la protection juridi...Sidy JUSTE
Ce mémoire, rédigé seulement quelques semaines après la dernière évaluation de la directive 96/9/CE sur la protection juridique des bases de données, s’efforce de démontrer que ce texte peut jouer un rôle important dans l’économie de la donnée et qu’il convient d’étudier avec attention l’application des règles de la propriété intellectuelle appliquée aux données, matières premières de l’IA et de l’industrie 4.0 (Machine and sensor generated data).
Y sont également évoquées les questions de mutualisation et de partage de données entre acteurs (privés et publics), problématiques essentielles dans le cadre de la construction du Marché unique numérique et de la libre circulation des données au sein de l’UE. La doctrine française et européenne (notamment Allemande) y sont largement analysées.
Un résumé se trouve en fin de document. Un article issu de ce travail a été publié dans la lettre n°54 de l’Association Française de Gouvernement d’Entreprise (la version anglaise de cet article est disponible sur mon compte Linkedin).
Ce mémoire a fait l’objet d’une soutenance en juillet 2018 et le jury lui a attribué la note de 15/20 en soulignant la qualité des analyses, des propositions et du travail de recherche.
La investigación científica requiere tiempo y recursos para descubrir nuevos conocimientos y avanzar en el entendimiento de problemas complejos. Aunque el proceso puede ser lento, los descubrimientos científicos han mejorado vidas al desarrollar nuevos tratamientos médicos y tecnologías que resuelven desafíos. Con paciencia y apoyo continuo, la ciencia progresará para beneficiar a la humanidad.
The document discusses BGL's experience developing bearing bush and nut materials based on international standards. BGL's materials achieve higher tensile strength than required by standards. The materials also have strength superior to SAE 1020 carbon steel. BGL recommends nodular cast iron bushes for their superior characteristics but also manufactures carbon steel or stainless steel parts per customer requests. It then provides tables listing specifications for various bearing bush and nut products.
Este documento presenta una introducción y clasificación de varios nudos útiles. Inicia describiendo nudos de tope, que se usan para evitar que los extremos de una cuerda se deslice o deshilache. Luego describe nudos de empalme y ajustes para unir cuerdas, y gaza, que son nudos que forman bucles o lazos en una cuerda. Finalmente presenta otras categorías de nudos como corredizos, para acortar cuerdas, ligadas y vuelta, nudos de pesca y varios otros nudos. En total,
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manualufjjejfksekmme
This is the Highly Detailed factory service repair manual for theCLAAS LEXION 480 CAT NA COMBINE (TYPE 566), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Operator’s Platform
Threshing Mechanism
Cleaning Unit
Grain Delivery
Straw Discharge
Drives
Machine Body
Hydraulic System
Engine
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual.
Thanks for visiting!
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Safety information and specifications are also provided to aid technicians in maintenance and repairs.
CLAAS LEXION 480 Combine (Type 466) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing, disassembling, and installing various components like the air conditioner, steering column, threshing drum, sieves, and cleaning fan. Tightening torques and specifications are also provided.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdff8soekmdmdm
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfzao908wangsa
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided.
Claas lexion 480 cat na combine (type 566) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfukdkksmmd
This document provides a repair manual for the LEXION 480 with sections covering: general information including safety rules, specifications, and diagrams; the operator's platform systems including air conditioning, steering, parking brake, foot brake, and electric systems; and the threshing mechanism components including the feed rake conveyor and its related parts. The manual contains detailed instructions for removing, disassembling, inspecting, assembling, and installing the various systems and components to aid technicians in repair work.
Claas lexion 480 cat na combine (type 566) service repair manualuufjdjksekmd
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfifkksem9didok
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
This document provides operation and safety instructions for a Westfalia Separator centrifuge.
The 6-page document includes:
1) Safety precautions and warnings for operating the centrifuge.
2) Descriptions of the centrifuge components and operating principles.
3) Instructions for installation, operation, maintenance, and repairs, including lubrication schedules and cleaning procedures.
4) Troubleshooting tips and accessories information.
Similar to Claas dominator 98 combine (093) service repair manual (16)
This document provides a parts list for a Massey Ferguson MF 690 tractor from 1984. It includes 34 items related to the cylinder block of the A4.248 engine, with part numbers, quantities, descriptions and comments. It also lists 20 items for the crankshaft, pistons and connecting rods and provides additional pages listing parts for other engine systems like the cylinder head, water outlets, and rocker shaft.
This document provides part numbers and descriptions for replacement parts for a Massey Ferguson MF 675 tractor from 1984. It includes lists of parts for the engine accessories, guards, fan, cylinder block, crankshaft and other engine components. Each item lists the part number, quantity, description and any comments about the part.
Massey ferguson mf 565 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 560 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional technical details. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 535 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list and technical specifications for Massey Ferguson MF 530/535 combines. It includes over 30 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, cylinder head cover, and other systems. Each part is listed with its part number, quantity used, description, and any relevant comments.
Massey ferguson mf 530 s combine parts catalogue manualfjjsekwsxkdmmem
The document provides a list of parts for a Massey Ferguson MF 530 S combine harvester with part numbers and descriptions. It includes tables of contents for the engine and accessories, cylinder block, crankshaft, and cylinder head sections, listing the individual parts that make up each system along with references to other part numbers. The parts are identified numerically in exploded diagram views of each section.
Massey ferguson mf 530 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for Massey Ferguson MF 530/535 combines. It contains over 30 entries listing part numbers, quantities, descriptions, and comments for various engine, cylinder block, crankshaft, cylinder head, and cylinder head cover parts. Refence numbers and page numbers are provided at the bottom of each section for navigation.
Massey ferguson mf 510 combine, (fr) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for a Massey Ferguson MF 510 combine harvester. It lists various parts needed for the combine's divider, pickup head, and related components. The parts are organized by item number, part number, quantity, description, and any relevant comments. Key parts listed include tubes, cones, plates, bolts, nuts, washers, bearings, discs, rollers, and reel tines for the divider and pickup head.
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualfjjsekwsxkdmmem
This document provides parts information for a Massey Ferguson 382 N tractor intended for use only in Japan. It includes detailed lists and descriptions of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part is accompanied by its part number, quantity used, description, and any relevant comments. The document is intended as a reference for ordering replacement parts for the MF 382 N tractor sold only in the Japanese market.
Massey ferguson mf 285 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 265 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 254 tractor, 22210640 parts catalogue manualfjjsekwsxkdmmem
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 254 tractor, including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear. It lists over 70 individual parts, providing part numbers, quantities, descriptions, and other identifying information for maintenance and repair of the engine and related systems.
Massey ferguson mf 245 tractor, (fr) parts catalogue manualfjjsekwsxkdmmem
This document provides a parts list for a Massey Ferguson MF 245 tractor. It contains 47 items describing parts like the engine, cylinder block, crankshaft, cylinder head, and timing gear. Each item lists the part number, quantity, description, and any comments. The parts list contains detailed technical specifications for replacement parts.
Komatsu 12 v140 1 series diesel engine service repair manualfjjsekwsxkdmmem
This document provides an overview of the contents and structure of a shop manual for diesel engines. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, repair and replacement of parts. The manual is intended to help technicians perform repairs safely and effectively by explaining components, repair procedures, and inspection standards. Safety notices are included to prevent injury when working on equipment.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. It provides important safety warnings and recommendations for proper oil, coolant, and fuel types.
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. Safety precautions are outlined, including warnings about rotating parts, hot parts, accidental starts, carbon monoxide, electrical shock, hot liquids, explosive gases, flammable fuels, and cleaning solvents. The document also provides information on engine identification numbers, oil recommendations, coolant recommendations, and fuel recommendations.
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, various engine systems, disassembly, inspection, and reassembly. It provides important safety information and recommendations for oil, coolant, and fuel used in the engines.
This document is an operator handbook for a JCB 1CX backhoe loader from serial numbers 751600 to 752999 and 806000 onwards. It contains safety notices and warnings about operating the machine safely. The contents section lists topics covered in the handbook such as identifying the machine, operation instructions, maintenance requirements, and lubricant safety information. Safety is the top priority when using the machine.
Hyundai hlf202530(c) 5 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1. Disassemble the steering unit by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2. Assemble the spool and sleeve with neutral position springs aligned correctly. Install the bearing races, cross pin, O-rings and lip seal using assembly tools.
3. Reassemble the remaining parts like the distributor plate, cardan shaft, gearwheel set and end cover. Proper alignment of parts is important for correct assembly.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.1
Contents
CONTENTS
Contents ................................................................................ 0.1.1
1. General information
General information ............................................................... 1.1.1
Introduction ...................................................................... 1.1.1
Introduction to the
CLAAS-REPAIR MANUAL .............................................. 1.1.2
Key to symbols ................................................................ 1.1.3
Safety rules ............................................................................ 1.2.1
Important ......................................................................... 1.2.1
Identification of warning and danger signs ...................... 1.2.2
Correct use of the machine ............................................. 1.2.2
General safety and accident prevention
regulations ....................................................................... 1.2.2
Leaving the machine ....................................................... 1.2.3
Compressor-type air conditioner ...................................... 1.2.3
Service ............................................................................. 1.2.3
Basic rule ......................................................................... 1.2.3
Hydraulic accumulators ................................................... 1.2.3
General information for repair ................................................ 1.3.1
Cause of trouble .............................................................. 1.3.1
Spare parts ...................................................................... 1.3.1
Engine ............................................................................. 1.3.1
Transmission ................................................................... 1.3.1
Three-phase alternator .................................................... 1.3.1
Correct tension of steel roller chains ............................... 1.3.1
Taper ring fasteners (locking cones) ............................... 1.3.1
Self-locking bolts
(with adhesive-filled micro capsules) ............................... 1.3.2
Liquid locking compound ................................................. 1.3.2
Correct installation of lock collar bearings ....................... 1.3.2
Correct installation of adapter sleeve
bearings ........................................................................... 1.3.2
Olive (ferrule) fittings on hydraulic lines ........................... 1.3.3
Progressive tube fittings on hydraulic lines ...................... 1.3.3
Taper fitting connections for hydraulic lines ..................... 1.3.4
Welding ............................................................................ 1.3.4
Some advice for speedy and correct repair ..................... 1.3.4
Torque settings ...................................................................... 1.4.1
Bolts ................................................................................. 1.4.1
Hydraulic fittings .............................................................. 1.4.2
Specifications ......................................................................... 1.5.1
Lubricants chart ............................................................... 1.5.1
2. Operator’s platform
Hand brake ............................................................................ 2.1.1
Removing the hand brake rope ....................................... 2.1.1
Hand brake, exploded view ............................................. 2.1.4
Installing the hand brake rope ......................................... 2.1.5
Foot brake .............................................................................. 2.2.1
Bleeding the brake system .............................................. 2.2.1
Removing the main brake cylinder .................................. 2.2.3
Installing the main brake cylinder .................................... 2.2.3
Air conditioner ........................................................................ 2.3.1
Important information on
compressor-type air conditioner ...................................... 2.3.1
Important information on installing parts
in the compressor-type air conditioner ............................ 2.3.2
Air conditioner – filling up refrigerant ............................... 2.3.3
Checking / filling up refrigerant oil
at the air conditioning compressor .................................. 2.3.4
Topping up refrigerant oil ................................................ 2.3.5
Removing the condenser ................................................ 2.3.5
Installing the condenser .................................................. 2.3.6
Removing the air conditioning compressor ..................... 2.3.7
Installing the air conditioning compressor ....................... 2.3.9
Removing the electro-magnetic clutch
of the air conditioning compressor ................................ 2.3.10
Air conditioning compressor Sanden Sd 5h 14,
exploded view ............................................................... 2.3.14
Installing the electro-magnetic clutch
of the air conditioning compressor ................................ 2.3.15
Air conditioning compressor – removing
the cylinder head / cylinder head gasket ....................... 2.3.17
Air conditioning compressor – installing
the cylinder head / cylinder head gasket ....................... 2.3.18
Air conditioning compressor – removing
the shaft seal ................................................................. 2.3.19
Air conditioning compressor – installing
the shaft seal ................................................................. 2.3.21
Removing the expansion valve ..................................... 2.3.22
Air conditioner (cab side), exploded view ...................... 2.3.24
Installing the expansion valve ....................................... 2.3.25
Removing the thermostat .............................................. 2.3.25
Installing the thermostat ................................................ 2.3.27
Removing the evaporator .............................................. 2.3.28
Installing the evaporator ................................................ 2.3.31
Removing the filter drier ................................................ 2.3.34
Filter drier, exploded view ............................................. 2.3.35
Installing the filter drier .................................................. 2.3.35
Engine – electric system ....................................................... 2.4.1
Removing the electric starting motor
DOMINATOR 98 VX – PERKINS 1006-60TW,
DOMINATOR 88 VX ....................................................... 2.4.1
Installing the electric starting motor
DOMINATOR 98 VX – PERKINS 1006-60TW,
DOMINATOR 88 VX ....................................................... 2.4.2
Removing the electric starting motor
DOMINATOR 98 VX – MERCEDES OM 366 LA,
DOMINATOR 108 VX ..................................................... 2.4.2
Installing the electric starting motor
DOMINATOR 98 VX – MERCEDES OM 366 LA,
DOMINATOR 108 VX ..................................................... 2.4.4
Alternator ......................................................................... 2.4.5
Removing the alternator .................................................. 2.4.6
Installing the alternator .................................................... 2.4.7
Steering ................................................................................. 2.5.1
Visible damage on the Orbitrol steering unit ................... 2.5.1
External leaks .................................................................. 2.5.1
Internal leaks ................................................................... 2.5.1
Contents
3. 0.1.2 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Contents
Removing the steering column ........................................ 2.5.2
Dismantling the steering column ...................................... 2.5.6
Steering, exploded view ................................................... 2.5.7
Assembling the steering column ...................................... 2.5.8
Installing the steering column .......................................... 2.5.9
Bleeding the steering hydraulic system ......................... 2.5.12
Checking the pressure control valve at
the steering valve block ................................................. 2.5.13
Removing the steering unit valve block ......................... 2.5.15
Dismantling the steering unit valve block ....................... 2.5.15
Assembling the steering unit valve block ....................... 2.5.18
Installing the steering unit valve block ........................... 2.5.20
Removing the steering unit ............................................ 2.5.20
Installing the steering unit .............................................. 2.5.22
3. Threshing mechanism
Feeder housing ...................................................................... 3.1.1
Removing the feeder housing .......................................... 3.1.1
Installing the feeder housing ............................................ 3.1.4
Removing the upper feed rake shaft ................................ 3.1.5
Upper feed rake shaft, exploded view
DOMINATOR 108 VX .................................................... 3.1.10
Upper feed rake shaft, exploded view
DOMINATOR 98 VX / 88 VX ......................................... 3.1.11
Installing the upper feed rake shaft ................................ 3.1.12
Removing the lower feed rake roller .............................. 3.1.14
Dismantling the lower feed rake roller ........................... 3.1.17
Lower feed rake roller, exploded view ........................... 3.1.19
Assembling the lower feed rake roller ............................ 3.1.19
Installing the lower feed rake roller ................................ 3.1.20
Replacing the feeder chains .......................................... 3.1.22
Removing the wooden ledges ....................................... 3.1.24
Installing the wooden ledges ......................................... 3.1.26
Removing the intermediate floor .................................... 3.1.27
Installing the intermediate floor ...................................... 3.1.31
Replacing the slide rails ................................................. 3.1.32
Removing the intermediate drive shaft .......................... 3.1.33
Installing the intermediate drive shaft ............................ 3.1.36
Concave ................................................................................. 3.2.1
Removing the stone trap .................................................. 3.2.1
Installing the stone trap .................................................... 3.2.2
Removing the concave .................................................... 3.2.3
Installing the concave ...................................................... 3.2.7
Basic setting of concave .................................................. 3.2.9
Threshing drum ...................................................................... 3.3.1
Removing the left-hand threshing
drum bearing .................................................................... 3.3.1
Dismantling the left-hand threshing
drum bearing .................................................................... 3.3.5
Left-hand threshing drum bearing,
exploded view .................................................................. 3.3.6
Assembling the left-hand threshing
drum bearing .................................................................... 3.3.6
Installing the left-hand threshing
drum bearing .................................................................... 3.3.7
Removing the right-hand threshing
drum bearing ................................................................. 3.3.11
Dismantling the right-hand threshing
drum bearing ................................................................. 3.3.15
Right-hand threshing drum bearing,
exploded view ................................................................ 3.3.15
Assembling the right-hand threshing
drum bearing ................................................................. 3.3.16
Installing the right-hand threshing
drum bearing ................................................................. 3.3.17
Removing the threshing drum ....................................... 3.3.19
Replacing the threshing drum rasp bars ....................... 3.3.24
Replacing the threshing drum shaft ............................... 3.3.26
Threshing drum, exploded view .................................... 3.3.27
Installing the threshing drum ......................................... 3.3.28
Impeller .................................................................................. 3.4.1
Removing the left-hand impeller bearing ......................... 3.4.1
Installing the left-hand impeller bearing ........................... 3.4.2
Removing the right-hand impeller bearing ...................... 3.4.3
Installing the right-hand impeller bearing ........................ 3.4.4
Removing the impeller ..................................................... 3.4.5
Dismantling the impeller .................................................. 3.4.5
Impeller, exploded view ................................................... 3.4.7
Assembling the impeller .................................................. 3.4.8
Installing the impeller ....................................................... 3.4.9
4. Cleaning
Under-walker return floor ....................................................... 4.1.1
Removing the under-walker return floor
DOMINATOR 88 VX ........................................................ 4.1.1
Front rocker arm, exploded view ..................................... 4.1.2
Rear rocker arm, exploded view ...................................... 4.1.2
Installing the under-walker return floor ............................ 4.1.3
Straw walker .......................................................................... 4.2.1
Removing the straw walker racks .................................... 4.2.1
Installing the straw walker racks ...................................... 4.2.3
Removing the front straw walker shaft ............................ 4.2.5
Installing the front straw walker shaft .............................. 4.2.7
Removing the rear straw walker shaft ............................. 4.2.8
Installing the rear straw walker shaft ............................. 4.2.11
Dismantling the straw walker shafts
(for straw walker shafts with ball bearings) ................... 4.2.14
Straw walker bearing, exploded view ............................ 4.2.15
Assembling the straw walker shafts
(for straw walker shafts with ball bearings) ................... 4.2.15
Intensive separation system .................................................. 4.3.1
Removing the front intensive
separation system shaft .................................................. 4.3.1
Installing the front intensive
separation system shaft .................................................. 4.3.4
Removing the rear intensive
separation system shaft .................................................. 4.3.6
Installing the rear intensive
separation system shaft .................................................. 4.3.8
Dismantling the intensive
separation system shaft ................................................ 4.3.10
Assembling the intensive
separation system shaft ................................................ 4.3.11
4. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.3
Contents
Removing the intensive separation
system control shaft ....................................................... 4.3.11
Installing the intensive separation
system control shaft ....................................................... 4.3.12
Replacing the agitator tines ........................................... 4.3.12
Sieve pan ............................................................................... 4.4.1
Removing the upper sieves
With 3-D cleaning system ................................................ 4.4.1
Installing the upper sieves
With 3-D cleaning system ................................................ 4.4.1
Removing the upper sieves
Without 3-D cleaning system ........................................... 4.4.1
Installing the upper sieves
Without 3-D cleaning system ........................................... 4.4.1
Removing the lower sieves
With 3-D cleaning system ................................................ 4.4.2
Installing the lower sieves
With 3-D cleaning system ................................................ 4.4.2
Removing the lower sieves
Without 3-D cleaning system ........................................... 4.4.3
Installing the lower sieves
Without 3-D cleaning system ........................................... 4.4.3
Removing the 3-D cleaning system frame ....................... 4.4.4
Cleaning system frame, exploded view ........................... 4.4.7
Installing the 3-D cleaning system frame ......................... 4.4.8
Removing the sieve pan ................................................ 4.4.13
Installing the sieve pan .................................................. 4.4.17
Preparation floor .................................................................... 4.5.1
Removing the preparation floor ....................................... 4.5.1
Preparation floor, exploded view ..................................... 4.5.5
Installing the preparation floor ......................................... 4.5.6
3-D cleaning system .............................................................. 4.6.1
Removing the 3-D cleaning system ................................. 4.6.1
Installing the 3-D cleaning system ................................... 4.6.1
3-D sieve pan suspension and cleaning system,
exploded view .................................................................. 4.6.2
Adjusting the 3-D cleaning system .................................. 4.6.4
Adjusting the pivot arm
using the «3-D gauge» .................................................... 4.6.5
Rocker arm drive .................................................................... 4.7.1
Removing the rocker arm drive ........................................ 4.7.1
Rocker arm drive, exploded view ..................................... 4.7.5
Installing the rocker arm drive ......................................... 4.7.7
Cleaning fan ........................................................................... 4.8.1
Removing the bearings to the right-hand and
left-hand side of cleaning fan ........................................... 4.8.1
Self-aligning ball bearing, exploded view ........................ 4.8.4
Installing the bearings to the right-hand and
left-hand side of cleaning fan ........................................... 4.8.4
Removing the fan blast reduction
DOMINATOR 108 VX ...................................................... 4.8.6
Fan blast reduction, exploded view
DOMINATOR 108 VX ...................................................... 4.8.8
Installing the fan blast reduction
DOMINATOR 108 VX ...................................................... 4.8.9
Removing the fan shaft
DOMINATOR 108 VX .................................................... 4.8.11
Installing the fan shaft
DOMINATOR 108 VX ................................................... 4.8.13
Removing the centre cleaning fan bearing
DOMINATOR 108 VX ................................................... 4.8.15
Centre cleaning fan bearing,
exploded view ............................................................... 4.8.16
Installing the centre cleaning fan bearing
DOMINATOR 108 VX ................................................... 4.8.16
Removing the fan rotors
DOMINATOR 108 VX ................................................... 4.8.16
Installing the fan rotors
DOMINATOR 108 VX ................................................... 4.8.17
Removing the fan housing
DOMINATOR 108 VX ................................................... 4.8.17
Installing the fan housing
DOMINATOR 108 VX ................................................... 4.8.18
Removing the wind boards
DOMINATOR 108 VX ................................................... 4.8.19
Installing the wind boards
DOMINATOR 108 VX ................................................... 4.8.19
Removing the fan shaft
DOMINATOR 98 – 88 VX ............................................. 4.8.20
Installing the fan shaft
DOMINATOR 98 – 88 VX ............................................. 4.8.20
Removing the fan spiders
DOMINATOR 98 – 88 VX ............................................. 4.8.21
Installing the fan spiders
DOMINATOR 98 – 88 VX ............................................. 4.8.21
Removing the fan rotor
DOMINATOR 98 – 88 VX ............................................. 4.8.22
Installing the fan rotor
DOMINATOR 98 – 88 VX ............................................. 4.8.23
Fan blades
DOMINATOR 98 – 88 VX ............................................. 4.8.23
Removing the fan housing
DOMINATOR 98 – 88 VX ............................................. 4.8.24
Installing the fan housing
DOMINATOR 98 – 88 VX ............................................. 4.8.25
Removing the wind boards
DOMINATOR 98 – 88 VX ............................................. 4.8.26
Installing the wind boards
DOMINATOR 98 – 88 VX ............................................. 4.8.26
5. Grain delivery
Returns elevator .................................................................... 5.1.1
Removing the returns elevator chain .............................. 5.1.1
Installing the returns elevator chain ................................ 5.1.3
Removing the upper returns auger ................................. 5.1.3
Installing the upper returns auger ................................... 5.1.6
Removing the returns elevator ........................................ 5.1.7
Dismantling the returns elevator ................................... 5.1.10
Assembling the returns elevator .................................... 5.1.12
Installing the returns elevator ........................................ 5.1.13
Removing the lower returns auger ................................ 5.1.15
Installing the lower returns auger .................................. 5.1.19
Grain elevator ........................................................................ 5.2.1
Removing the grain elevator chain
DOMINATOR 98 VX – 88 VX .......................................... 5.2.1
5. 0.1.4 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Contents
Installing the grain elevator chain
DOMINATOR 98 VX – 88 VX .......................................... 5.2.3
Removing the grain elevator chain
DOMINATOR 108 VX ...................................................... 5.2.3
Installing the grain elevator chain
DOMINATOR 108 VX ...................................................... 5.2.5
Removing the grain elevator top
DOMINATOR 98 VX – 88 VX .......................................... 5.2.6
Removing the grain elevator top
DOMINATOR 108 VX ...................................................... 5.2.7
Dismantling the grain elevator top ................................... 5.2.7
Grain elevator top, exploded view ................................. 5.2.11
Assembling the grain elevator top ................................. 5.2.12
Installing the grain elevator top
DOMINATOR 98 VX – 88 VX ........................................ 5.2.15
Installing the grain elevator top
DOMINATOR 108 VX .................................................... 5.2.15
Removing the grain elevator shaft
DOMINATOR 108 VX .................................................... 5.2.16
Installing the grain elevator shaft
DOMINATOR 108 VX .................................................... 5.2.19
Removing the grain elevator boot
DOMINATOR 98 VX – 88 VX ........................................ 5.2.20
Installing the grain elevator boot
DOMINATOR 98 VX – 88 VX ........................................ 5.2.23
Removing the grain elevator boot
DOMINATOR 108 VX .................................................... 5.2.23
Installing the grain elevator boot
DOMINATOR 108 VX .................................................... 5.2.25
Removing the grain auger ............................................. 5.2.26
Installing the grain auger ............................................... 5.2.29
Removing the grain tank filler auger
DOMINATOR 98 VX – 88 VX ........................................ 5.2.31
Removing the grain tank filler auger
DOMINATOR 108 VX .................................................... 5.2.32
Dismantling the angle drive for grain tank
filler auger DOMINATOR 108 VX – 88 VX .................... 5.2.34
Grain tank filler auger, exploded view ............................ 5.2.36
Assembling the angle drive for grain tank
filler auger DOMINATOR 108 VX – 88 VX .................... 5.2.37
Installing the grain tank filler auger
DOMINATOR 98 VX – 88 VX ........................................ 5.2.39
Installing the grain tank filler auger
DOMINATOR 108 VX .................................................... 5.2.40
Grain tank unloading .............................................................. 5.3.1
Removing the grain tank unloading auger ....................... 5.3.1
Installing the grain tank unloading auger ......................... 5.3.4
Removing the grain tank unloading tube auger ............... 5.3.5
Installing the grain tank unloading tube auger ................. 5.3.7
Removing the grain tank unloading tube ......................... 5.3.7
Installing the grain tank unloading tube ........................... 5.3.9
Removing the lateral augers
DOMINATOR 108 VX .................................................... 5.3.10
Installing the lateral augers
DOMINATOR 108 VX .................................................... 5.3.12
Chaff spreader ....................................................................... 5.4.1
Removing the chaff spreader
flange housing ................................................................. 5.4.1
Dismantling the chaff spreader
flange housing ................................................................. 5.4.2
Assembling the chaff spreader
flange housing ................................................................. 5.4.3
Installing the chaff spreader
flange housing ................................................................. 5.4.5
Removing the chaff spreader drive shaft ......................... 5.4.6
Dismantling the chaff spreader drive shaft ...................... 5.4.7
Chaff spreader, exploded view ........................................ 5.4.8
Assembling the chaff spreader drive shaft .................... 5.4.10
Installing the chaff spreader drive shaft ......................... 5.4.10
6. Grain delivery
Straw spreader ...................................................................... 6.1.1
Removing the straw spreader ......................................... 6.1.1
Dismantling the straw spreader ....................................... 6.1.2
Straw spreader, exploded view ....................................... 6.1.5
Assembling the straw spreader ....................................... 6.1.7
Installing the straw spreader ........................................... 6.1.9
Straw chopper ....................................................................... 6.2.1
Removing the right-hand
straw chopper bearing ..................................................... 6.2.1
Removing the left-hand
straw chopper bearing ..................................................... 6.2.3
Dismantling the left-hand / right-hand
straw chopper bearing ..................................................... 6.2.5
Assembling the left-hand / right-hand
straw chopper bearing ..................................................... 6.2.5
Installing the right-hand
straw chopper bearing ..................................................... 6.2.6
Installing the left-hand
straw chopper bearing ..................................................... 6.2.8
Removing the cutting cylinder ....................................... 6.2.10
Cutting cylinder, exploded view ..................................... 6.2.12
Pre-assembling the cutting cylinder .............................. 6.2.13
Installing the cutting cylinder ......................................... 6.2.14
7. Drives
Drive belts .............................................................................. 7.1.1
General instructions ........................................................ 7.1.1
Drive diagram, left-hand side .......................................... 7.1.2
Drive diagram, right-hand side ........................................ 7.1.3
Drive belts on left-hand side .................................................. 7.2.1
Removing the cutterbar drive belt (1) .............................. 7.2.1
Installing and adjusting the
cutterbar drive belt (1) ..................................................... 7.2.3
Removing the compressor drive belt (2) ......................... 7.2.4
Installing and adjusting the
compressor drive belt (2) ................................................. 7.2.4
Removing the hydrostatic
ground drive belt (3) ........................................................ 7.2.5
Installing and adjusting the
hydrostatic ground drive belt (3) ...................................... 7.2.7
Removing the drive belt (4) for the
working hydraulics pump.................................................. 7.2.9
6. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.5
Contents
Installing and adjusting the drive belt (4) for the
working hydraulics pump.................................................. 7.2.9
Removing the threshing mechanism drive belt (5) ........ 7.2.10
Installing and adjusting the threshing mechanism
drive belt (5) ................................................................... 7.2.12
Removing the grain tank discharge drive belt (6) .......... 7.2.13
Installing and adjusting the grain tank discharge
drive belt (6) ................................................................... 7.2.15
Removing the sieve pan / fan intermediate
drive belt (7) ................................................................... 7.2.16
Installing and adjusting the sieve pan / fan
intermediate drive belt (7) .............................................. 7.2.16
Removing the fan drive belt (8) ..................................... 7.2.17
Installing the fan drive belt (8) ....................................... 7.2.18
Removing the sieve pan
intermediate drive belt (9) .............................................. 7.2.19
Installing and adjusting the sieve pan
intermediate drive belt (9) .............................................. 7.2.19
Removing the sieve pan drive belt (10) ......................... 7.2.20
Installing and adjusting the sieve pan
drive belt (10) ................................................................. 7.2.21
Removing the straw walker drive belt (11) ..................... 7.2.21
Installing and adjusting the straw walker
drive belt (11) ................................................................. 7.2.22
Removing the intensive separation system
drive belt (12) ................................................................. 7.2.23
Installing and adjusting intensive separation
drive belt (12) ................................................................. 7.2.24
Removing the lateral auger drive belt (13)
DOMINATOR 88 VX....................................................... 7.2.25
Removing the straw spreader drive belt (14) ................. 7.2.25
Installing and adjusting the straw spreader
drive belt (14) ................................................................. 7.2.26
Removing the chaff spreader drive belt (15) .................. 7.2.26
Installing and adjusting the chaff spreader
drive belt (15) ................................................................. 7.2.27
Removing the chaff spreader drive belt (16) .................. 7.2.27
Installing and adjusting the chaff spreader
drive belt (16) ................................................................. 7.2.27
Drive belts on right-hand side ................................................ 7.3.1
Removing the straw chopper drive belt (20) .................... 7.3.1
Installing and adjusting the straw chopper
drive belt (20) ................................................................... 7.3.2
Removing the straw chopper intermediate
drive belt (21) ................................................................... 7.3.3
Installing and adjusting the straw chopper
intermediate drive belt (21) .............................................. 7.3.3
Removing the suction blower drive belt (22) .................... 7.3.4
Installing and adjusting suction
blower drive belt (22) ....................................................... 7.3.5
Removing the threshing drum
speed control belt (23) ..................................................... 7.3.6
Installing and adjusting the threshing drum
speed control belt (23) .................................................... 7.3.8
Removing the threshing drum
drive belt (24) ................................................................. 7.3.10
Installing and adjusting the threshing drum
drive belt (24) ................................................................. 7.3.12
Removing the threshing drum
speed control belt (25)
(excluding intermediate drive) ....................................... 7.3.13
Installing and tensioning the threshing drum
speed control belt (25)
(excluding intermediate drive) ....................................... 7.3.14
Removing the radiator chaff screen
drive belt (26) ................................................................ 7.3.15
Installing the radiator chaff screen
drive belt (26) ................................................................ 7.3.15
Removing the radiator chaff screen
intermediate drive belt (27) ........................................... 7.3.16
Installing and adjusting the radiator chaff screen
intermediate drive belt (27) ........................................... 7.3.16
Removing the grain elevator top drive chain (30)
DOMINATOR 108 VX ................................................... 7.3.17
Installing the grain elevator top drive chain (30)
DOMINATOR 108 VX ................................................... 7.3.17
Removing the grain elevator top drive chain (30)
DOMINATOR 98 VX / 88 VX ......................................... 7.3.18
Installing the grain elevator top drive chain (30)
DOMINATOR 98 VX / 88 VX ......................................... 7.3.19
Removing the grain tank unloading
intermediate drive chain (31) ......................................... 7.3.19
Installing and adjusting the grain tank unloading
intermediate drive chain (31) ......................................... 7.3.19
Removing the grain tank unloading
intermediate drive chain (32)
DOMINATOR 108 VX ................................................... 7.3.20
Installing and adjusting the grain tank unloading
intermediate drive chain (32)
DOMINATOR 108 VX ................................................... 7.3.20
Removing the returns drive chain (33) .......................... 7.3.21
Installing and adjusting the returns
drive chain (33) ............................................................. 7.3.21
Cutterbar drive ....................................................................... 7.4.1
Removing the cutterbar clutch ........................................ 7.4.1
Cutterbar clutch, exploded view ...................................... 7.4.6
Installing the cutterbar clutch .......................................... 7.4.9
Removing the front cutterbar drive pulley
(DOMINATOR 108 VX) ................................................. 7.4.15
Installing the front cutterbar drive pulley
(DOMINATOR 108 VX) ................................................. 7.4.15
Removing the front cutterbar drive pulley
(DOMINATOR 98 VX / 88 VX) ...................................... 7.4.15
Installing the front cutterbar drive pulley
(DOMINATOR 98 VX / 88 VX) ...................................... 7.4.16
Removing the cutterbar drive deflection pulley ............. 7.4.16
Cutterbar drive deflection pulley, exploded view ........... 7.4.16
Installing the cutterbar drive deflection pulley ............... 7.4.17
Removing the cutterbar drive slip clutch ....................... 7.4.17
Dismantling the cutterbar drive slip clutch ..................... 7.4.17
Cutterbar drive slip clutch, exploded view ..................... 7.4.19
Assembling the cutterbar drive slip clutch ..................... 7.4.19
Installing the cutterbar drive slip clutch ......................... 7.4.21
Removing the cutterbar drive jockey pulley .................. 7.4.22
Cutterbar drive jockey pulley, exploded view ................ 7.4.22
Installing the cutterbar drive jockey pulley .................... 7.4.22
7. 0.1.6 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Contents
Left-hand threshing mechanism drive .................................... 7.5.1
Removing the threshing mechanism drive pulley ............ 7.5.1
Installing the threshing mechanism drive pulley .............. 7.5.1
Removing the threshing mechanism drive
jockey pulley .................................................................... 7.5.1
Threshing mechanism drive jockey pulley,
exploded view .................................................................. 7.5.2
Installing the threshing mechanism drive
jockey pulley .................................................................... 7.5.3
Right-hand threshing mechanism drive ................................. 7.6.1
Removing the threshing drum
variable-speed drive (spring-loaded) ............................... 7.6.1
Dismantling the threshing drum
variable-speed drive (spring-loaded) ............................... 7.6.3
Threshing drum variable-speed drive
(spring-loaded), exploded view ........................................ 7.6.6
Assembling the threshing drum
variable-speed drive (spring-loaded) ............................... 7.6.7
Installing the threshing drum
variable-speed drive (spring-loaded) ............................. 7.6.11
Removing the threshing drum
variable-speed drive (hydraulic) ..................................... 7.6.14
Dismantling the threshing drum
variable-speed drive (hydraulic) ..................................... 7.6.16
Threshing drum variable-speed drive
(hydraulic), exploded view ............................................. 7.6.18
Assembling the threshing drum
variable-speed drive (hydraulic) ..................................... 7.6.20
Installing the threshing drum
variable-speed drive (hydraulic) ..................................... 7.6.22
Removing the threshing drum drive jockey pulley
without threshing drum speed reduction kit
(DOMINATOR 108 VX),
with threshing drum speed reduction kit
(DOMINATOR 108 VX – 88 VX) .................................... 7.6.24
Threshing drum drive jockey pulley,
exploded view ................................................................ 7.6.24
Installing the threshing drum drive jockey pulley
without threshing drum speed reduction kit
(DOMINATOR 108 VX),
with threshing drum speed reduction kit
(DOMINATOR 108 VX – 88 VX) .................................... 7.6.24
Threshing drum speed reduction kit ....................................... 7.7.1
Removing the threshing drum speed reduction kit .......... 7.7.1
Dismantling the threshing drum speed reduction kit ........ 7.7.2
Threshing drum speed reduction kit, exploded view ........ 7.7.7
Assembling the threshing drum speed reduction kit ........ 7.7.8
Installing the threshing drum speed reduction kit .......... 7.7.14
Sieve pan intermediate drive ................................................. 7.8.1
Removing the sieve pan / fan intermediate
drive jockey pulley ........................................................... 7.8.1
Sieve pan / fan intermediate drive jockey pulley,
exploded view .................................................................. 7.8.1
Installing the sieve pan / fan intermediate
drive jockey pulley ........................................................... 7.8.1
Straw walker drive .................................................................. 7.9.1
Removing the straw walker drive jockey pulley ............... 7.9.1
Installing the straw walker drive jockey pulley ................. 7.9.1
Removing the intensive separation system
drive deflection pulley ...................................................... 7.9.1
Installing the intensive separation system
drive deflection pulley ...................................................... 7.9.2
Removing the intensive separation system
drive jockey pulley ........................................................... 7.9.2
Installing the intensive separation system
drive jockey pulley ........................................................... 7.9.2
Straw walker drive, exploded view .................................. 7.9.3
Sieve pan drive .................................................................... 7.10.1
Removing the straw walker / sieve pan
intermediate drive jockey pulley .................................... 7.10.1
Dismantling the straw walker / sieve pan
intermediate drive jockey pulley .................................... 7.10.1
Assembling the straw walker / sieve pan
intermediate drive jockey pulley .................................... 7.10.2
Installing the straw walker / sieve pan
intermediate drive jockey pulley .................................... 7.10.2
Removing the straw walker / sieve pan
intermediate drive V-belt pulley package ...................... 7.10.3
Dismantling the straw walker / sieve pan
intermediate drive V-belt pulley package ...................... 7.10.3
Assembling the straw walker / sieve pan
intermediate drive V-belt pulley package ...................... 7.10.4
Installing the straw walker / sieve pan
intermediate drive V-belt pulley package ...................... 7.10.5
Removing the sieve pan drive deflection pulley ............ 7.10.5
Straw walker / sieve pan intermediate drive,
exploded view ................................................................ 7.10.6
Installing the sieve pan drive deflection pulley .............. 7.10.7
Removing the sieve pan drive jockey pulley ................. 7.10.7
Sieve pan drive jockey pulley, exploded view ............... 7.10.8
Installing the sieve pan drive jockey pulley ................... 7.10.8
Fan drive .............................................................................. 7.11.1
Removing the fan adjustment (electrical)
(Version A) .................................................................... 7.11.1
Dismantling the fan adjustment (electrical)
(Version A) .................................................................... 7.11.2
Fan adjustment (electrical), exploded view
(Version A) .................................................................... 7.11.3
Assembling the fan adjustment (electrical)
(Version A) .................................................................... 7.11.4
Installing the fan adjustment (electrical)
(Version A) .................................................................... 7.11.7
Removing the fan adjustment (electrical)
(Version B) .................................................................... 7.11.8
Dismantling the fan adjustment (electrical)
(Version B) .................................................................... 7.11.9
Fan adjustment (electrical), exploded view
(Version B) .................................................................. 7.11.11
Assembling the fan adjustment (electrical)
(Version B) .................................................................. 7.11.12
Installing the fan adjustment (electrical)
(Version B) .................................................................. 7.11.14
8. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.7
Contents
Removing the variable-speed fan drive
(electrical) .................................................................... 7.11.15
Dismantling the variable-speed fan drive
(electrical) .................................................................... 7.11.16
Variable speed fan drive (electrical),
exploded view .............................................................. 7.11.18
Assembling the variable-speed fan drive
(electrical) .................................................................... 7.11.19
Installing the variable-speed fan drive
(electrical) .................................................................... 7.11.21
Aligning the variable speed fan pulleys ....................... 7.11.25
Removing the variable-speed fan drive
(spring-loaded) ............................................................ 7.11.26
Dismantling the variable-speed fan drive
(spring-loaded) ............................................................ 7.11.27
Variable-speed fan drive (spring-loaded),
exploded view .............................................................. 7.11.29
Assembling the variable-speed fan drive
(spring-loaded) ............................................................ 7.11.30
Installing the variable-speed fan drive
(spring-loaded) ............................................................ 7.11.32
Chaff spreader drive ............................................................ 7.12.1
Removing the chaff spreader drive bracket ................... 7.12.1
Dismantling the chaff spreader drive bracket ................ 7.12.2
Assembling the chaff spreader drive bracket ................. 7.12.3
Installing the chaff spreader drive bracket ..................... 7.12.3
Removing the chaff spreader drive jockey pulley .......... 7.12.4
Dismantling the chaff spreader drive jockey pulley ........ 7.12.4
Chaff spreader drive, exploded view ............................. 7.12.6
Assembling the chaff spreader drive jockey pulley ........ 7.12.7
Installing the chaff spreader drive jockey pulley ............ 7.12.7
Grain tank unloading drive ................................................... 7.13.1
Removing the upper angle drive of
grain tank unloading ...................................................... 7.13.1
Dismantling the upper angle drive of
grain tank unloading ...................................................... 7.13.2
Upper angle drive of grain tank unloading,
assembled ..................................................................... 7.13.3
Assembling the upper angle drive of
grain tank unloading ...................................................... 7.13.4
Installing the upper angle drive of
grain tank unloading ...................................................... 7.13.6
Removing the lower angle drive of
grain tank unloading ...................................................... 7.13.7
Dismantling the lower angle drive of
grain tank unloading ...................................................... 7.13.8
Lower angle drive of grain tank unloading,
assembled ................................................................... 7.13.12
Assembling the lower angle drive of
grain tank unloading .................................................... 7.13.13
Installing the lower angle drive of
grain tank unloading .................................................... 7.13.15
Removing the grain tank intermediate drive shaft ....... 7.13.16
Installing the grain tank intermediate drive shaft ......... 7.13.18
Removing the grain tank unloading drive
jockey pulley
(DOMINATOR 108 VX) ............................................... 7.13.20
Grain tank unloading drive jockey pulley,
exploded view
(DOMINATOR 108 VX) ............................................... 7.13.20
Installing the grain tank unloading drive
jockey pulley
(DOMINATOR 108 VX) ............................................... 7.13.20
Removing the grain tank unloading drive
jockey pulley
(DOMINATOR 98 VX / 88 VX) .................................... 7.13.21
Grain tank unloading drive jockey pulley,
exploded view
(DOMINATOR 98 VX / 88 VX) .................................... 7.13.21
Installing the grain tank unloading drive
jockey pulley
(DOMINATOR 98 VX / 88 VX) .................................... 7.13.21
Removing the grain tank unloading auger
safety clutch ................................................................ 7.13.22
Dismantling the grain tank unloading auger
safety clutch ................................................................ 7.13.23
Grain tank unloading auger safety clutch,
exploded view ............................................................. 7.13.23
Assembling the grain tank unloading auger
safety clutch ................................................................ 7.13.24
Installing the grain tank unloading auger
safety clutch ................................................................ 7.13.24
Removing the lateral auger drive
(DOMINATOR 108 VX) ............................................... 7.13.25
Installing the lateral auger drive
(DOMINATOR 108 VX) ............................................... 7.13.25
Straw chopper drive ............................................................ 7.14.1
Removing the straw chopper intermediate drive
jockey pulley .................................................................. 7.14.1
Straw chopper intermediate drive jockey pulley,
exploded view ............................................................... 7.14.1
Installing the straw chopper intermediate drive
jockey pulley .................................................................. 7.14.1
Removing the straw chopper intermediate drive ........... 7.14.2
Dismantling the straw chopper intermediate drive ........ 7.14.3
Assembling the straw chopper intermediate drive ........ 7.14.5
Installing the straw chopper intermediate drive ............. 7.14.7
Removing the straw chopper drive jockey pulley .......... 7.14.7
Straw chopper intermediate drive, exploded view ......... 7.14.8
Installing the straw chopper drive jockey pulley ............ 7.14.9
Straw spreader drive ........................................................... 7.15.1
Removing the straw spreader tensioning device .......... 7.15.1
Dismantling the straw spreader tensioning device ........ 7.15.1
Straw spreader tensioning device, exploded view ........ 7.15.2
Assembling the straw spreader tensioning device ........ 7.15.3
Installing the straw spreader tensioning device ............ 7.15.3
Rotary radiator screen drive ................................................ 7.16.1
Removing the rotary radiator screen drive shaft ........... 7.16.1
Dismantling the rotary radiator screen drive shaft ......... 7.16.2
Rotary radiator screen drive, exploded view ................. 7.16.6
Assembling the rotary radiator screen drive shaft ......... 7.16.7
Installing the rotary radiator screen drive shaft ............. 7.16.9
9. 0.1.8 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Contents
Rotary radiator screen suction blower ................................. 7.17.1
Removing the rotary radiator screen
suction blower ................................................................ 7.17.1
Dismantling the rotary radiator screen
suction blower ................................................................ 7.17.1
Rotary radiator screen suction blower,
exploded view ................................................................ 7.17.4
Assembling the rotary radiator screen
suction blower ................................................................ 7.17.5
Installing the rotary radiator screen
suction blower ................................................................ 7.17.7
Hydraulic pump drive ........................................................... 7.18.1
Removing the hydrostatic ground drive
jockey pulley
(DOMINATOR 108 VX) .................................................. 7.18.1
Hydrostatic ground drive jockey pulley,
exploded view
(DOMINATOR 108 VX) .................................................. 7.18.1
Installing the hydrostatic ground drive
jockey pulley
(DOMINATOR 108 VX) .................................................. 7.18.2
Removing the hydrostatic ground drive
jockey pulley
(DOMINATOR 98 VX / 88 VX) ....................................... 7.18.3
Hydrostatic ground drive jockey pulley,
exploded view
(DOMINATOR 98 VX / 88 VX) ....................................... 7.18.4
Installing the hydrostatic ground drive
jockey pulley
(DOMINATOR 98 / 88 VX) ............................................. 7.18.5
Final drives ........................................................................... 7.19.1
Removing the final drives .............................................. 7.19.1
Dismantling the final drives
DOMINATOR 108 VX .................................................... 7.19.2
Final drive, exploded view
DOMINATOR 108 VX .................................................. 7.19.11
Assembling the final drives
DOMINATOR 108 VX .................................................. 7.19.13
Dismantling the final drives
DOMINATOR 98 VX / 88 VX ....................................... 7.19.22
Assembling the final drives
DOMINATOR 98 VX / 88 VX ....................................... 7.19.29
Installing the final drives .............................................. 7.19.37
Transmission gearbox .......................................................... 7.20.1
Lowering the transmission gearbox
with drum brakes
(DOMINATOR 108 VX / 88 VX) ..................................... 7.20.1
Raising the transmission gearbox
with drum brakes
(DOMINATOR 108 VX / 88 VX) ..................................... 7.20.7
Lowering the transmission gearbox
with disc brakes
(DOMINATOR 98 VX) .................................................. 7.20.12
Raising the transmission gearbox
with disc brakes
(DOMINATOR 98 VX) .................................................. 7.20.16
Removing the transmission gearbox ........................... 7.20.20
Dismantling the gearbox
(DOMINATOR 108 VX) ............................................... 7.20.26
Assembling the gearbox
DOMINATOR 108 VX .................................................. 7.20.37
Dismantling the gearbox
(DOMINATOR 98 / 88 VX) .......................................... 7.20.44
Assembling the gearbox
(DOMINATOR 98 VX / 88 VX) .................................... 7.20.57
Dismantling the differential
(DOMINATOR 108 VX – 88 VX) ................................. 7.20.67
Differential, exploded view .......................................... 7.20.69
Assembling the differential
(DOMINATOR 108 VX – 88 VX) ................................. 7.20.70
Installing the gearbox .................................................. 7.20.73
Parking brake ...................................................................... 7.21.1
Removing the brake units for the parking brake
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.21.1
Installing the brake units for the parking brake
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.21.3
Removing the brake units for the parking brake
with disc brakes
(DOMINATOR 98 VX) ................................................... 7.21.5
Installing the brake units for the parking brake
with disc brakes
(DOMINATOR 98 VX) ................................................... 7.21.6
Foot brake ........................................................................... 7.22.1
Bleeding the brake units ................................................ 7.22.1
Removing the brake shoes from the foot brake
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.22.2
Installing the brake shoes from the foot brake
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.22.4
Removing the wheel brake ram
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.22.5
Installing the wheel brake ram
with drum brakes
(DOMINATOR 108 VX / 88 VX) .................................... 7.22.6
Removing the brake cradle
with disc brakes (DOMINATOR 98 VX) ......................... 7.22.6
Installing the brake cradle
with disc brakes (DOMINATOR 98 VX) ......................... 7.22.8
Removing the brake pads
with disc brakes (DOMINATOR 98 VX) ......................... 7.22.9
Installing the brake pads
with disc brakes (DOMINATOR 98 VX) ....................... 7.22.10
Drive axle ............................................................................. 7.23.1
Removing the drive axle ................................................ 7.23.1
Installing the drive axle .................................................. 7.23.5
Steering axle ........................................................................ 7.24.1
Removing the wheel bearings
(2.05 m steering axle) .................................................... 7.24.1
Installing the wheel bearings
(2.05 m steering axle) .................................................... 7.24.3
10. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.9
Contents
Removing the stub axle
(2.05 m steering axle) .................................................... 7.24.6
Installing the stub axle
(2.05 m steering axle) .................................................... 7.24.8
Removing the wheel bearings
(adjustable axle) .......................................................... 7.24.10
Installing the wheel bearings
(adjustable steering axle) ............................................ 7.24.12
Removing the stub axle
(adjustable steering axle) ............................................ 7.24.14
Installing the stub axle
(adjustable steering axle) ............................................ 7.24.16
Adjusting the steering axle end stops
(2.05 m steering axle,
adjustable steering axle) .............................................. 7.24.18
Adjusting the steering axle end stops
(CLAAS 4-trac axle) ..................................................... 7.24.19
Wheel track adjustment ............................................... 7.24.20
Removing the steering axle ......................................... 7.24.22
Installing the steering axle ........................................... 7.24.25
Removing the CLAAS 4-trac axle ................................ 7.24.27
Installing the CLAAS 4-trac axle .................................. 7.24.30
Bleeding the hydraulic motors
(CLAAS 4-trac axle) ..................................................... 7.24.33
Removing the planetary gearbox / hydraulic motor
(CLAAS 4-trac axle) ..................................................... 7.24.35
Removing the stub axle housing
(CLAAS 4-trac axle) ..................................................... 7.24.37
CLAAS 4-trac system, exploded view .......................... 7.24.39
Installing the stub axle housing
(CLAAS 4-trac axle) ..................................................... 7.24.40
Installing planetary gearbox / hydraulic motor
(CLAAS 4-trac axle) ..................................................... 7.24.41
8.
9. Hydraulics
Maintenance .......................................................................... 9.1.1
Hydraulic system ............................................................. 9.1.1
Checking the hydraulic oil level ....................................... 9.1.2
Changing the hydraulic oil ............................................... 9.1.2
Hydraulic pump ...................................................................... 9.2.1
Removing the double pump with the hydraulic tank ........ 9.2.1
Dismantling the double pump and the hydraulic tank ...... 9.2.3
Double pump and hydraulic tank, exploded view ............ 9.2.5
Assembling the double pump and hydraulic tank ............ 9.2.6
Installing the double pump and hydraulic tank ................ 9.2.8
Check the double pump ................................................... 9.2.9
Hydraulic ram – steering hydraulics ....................................... 9.3.1
Removing the steering ram
(with 2.05 m steering axle) .............................................. 9.3.1
Dismantling the steering ram
(with 2.05 m steering axle) .............................................. 9.3.2
Steering ram, exploded view
(with 2.05 m steering axle) .............................................. 9.3.3
Assembling the steering ram
(with 2.05 m steering axle) .............................................. 9.3.4
Installing the steering axle
(with 2.05 m steering axle) .............................................. 9.3.5
Removing the steering ram
(with adjustable steering axle
and CLAAS 4-trac axle) .................................................. 9.3.6
Dismantling the steering ram
(with adjustable steering axle
and CLAAS 4-trac axle) .................................................. 9.3.7
Steering ram, exploded view
(with adjustable steering axle
and CLAAS 4-trac axle) .................................................. 9.3.8
Assembling the steering ram
(with adjustable steering axle
and CLAAS 4-trac axle) .................................................. 9.3.9
Installing the steering ram
(with adjustable steering axle
and CLAAS 4-trac axle) ................................................ 9.3.10
Bleed the steering ram .................................................. 9.3.11
Removing the 3-D sieve box hydraulic ram .................. 9.3.12
Dismantling the 3-D sieve box hydraulic ram ................ 9.3.13
3-D sieve box hydraulic ram, exploded view ................. 9.3.14
Assembling the 3-D sieve box hydraulic ram ................ 9.3.15
Installing the 3-D sieve box hydraulic ram .................... 9.3.16
Removing the 3-D sieve box pendulum ........................ 9.3.16
Dismantling the 3-D sieve box pendulum ...................... 9.3.17
3-D pendulum unit, exploded view ................................ 9.3.19
Assembling the 3-D pendulum ...................................... 9.3.20
Installing the 3-D sieve box pendulum .......................... 9.3.20
Hydraulic ram – low-pressure hydraulics .............................. 9.4.1
Removing the threshing drum engagement ram ............. 9.4.1
Dismantling the threshing drum engagement ram .......... 9.4.2
Threshing engagement ram, exploded view ................... 9.4.3
Assembling the threshing engagement ram .................... 9.4.4
Installing the threshing engagement ram ........................ 9.4.5
Removing the grain tank engagement ram
(DOMINATOR 108 VX) ................................................... 9.4.6
Installing the grain tank engagement ram
(DOMINATOR 108 VX) ................................................... 9.4.7
Removing the grain tank engagement ram
(DOMINATOR 98 VX / 88 VX) ........................................ 9.4.8
Installing the grain tank engagement ram
(DOMINATOR 98 VX / 88 VX) ........................................ 9.4.9
Dismantling the grain tank engagement ram ................ 9.4.10
Grain tank engagement ram, exploded view ................. 9.4.11
Assembling the grain tank engagement ram ................. 9.4.12
Removing the rotary coupling for the
cutterbar engagement ................................................... 9.4.13
Dismantling the rotary coupling for the
cutterbar engagement ................................................... 9.4.13
Assembling the rotary coupling for the
cutterbar engagement ................................................... 9.4.16
Installing the rotary coupling for the
cutterbar engagement ................................................... 9.4.18
Removing the cutterbar engagement ram ..................... 9.4.19
Dismantling the cutterbar engagement ram .................. 9.4.20
Rotary coupling and hydraulic ram for the
cutterbar engagement, exploded view .......................... 9.4.21
Assembling the cutterbar engagement ram .................. 9.4.22
Installing the cutterbar engagement ram ....................... 9.4.23
11. 0.1.10 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Contents
Working hydraulics rams ........................................................ 9.5.1
Removing the cutterbar rams .......................................... 9.5.1
Dismantling the cutterbar rams ........................................ 9.5.2
Cutterbar ram, exploded view .......................................... 9.5.4
Assembling the cutterbar rams ........................................ 9.5.5
Installing the cutterbar rams ............................................ 9.5.6
Removing the grain tank unloading tube ram .................. 9.5.7
Dismantling the grain tank unloading tube ram ............... 9.5.7
Grain tank unloading tube ram, exploded view ................ 9.5.9
Assembling the grain tank unloading tube ram .............. 9.5.10
Installing the grain tank unloading tube ram .................. 9.5.12
Removing the CLAAS Auto-Contour
hydraulic ram ................................................................. 9.5.13
Dismantling the CLAAS Auto-Contour
hydraulic ram ................................................................. 9.5.13
Hydraulic ram for the CLAAS Auto-Contour,
exploded view ................................................................ 9.5.15
Assembling the CLAAS Auto-Contour
hydraulic ram ................................................................. 9.5.16
Installing the CLAAS Auto-Contour
hydraulic ram ................................................................. 9.5.18
Bleeding the CLAAS Auto-Contour
hydraulic ram ................................................................. 9.5.18
Removing the rotary coupling for the drum
variable-speed drive ...................................................... 9.5.20
Dismantling the rotary coupling for the drum
variable-speed drive ...................................................... 9.5.20
Assembling the rotary coupling for the drum
variable-speed drive ...................................................... 9.5.23
Installing the rotary coupling for the drum
variable-speed drive ...................................................... 9.5.25
Removing the hydraulic ram for the drum
variable-speed drive ...................................................... 9.5.26
Dismantling the hydraulic ram for the drum
variable-speed drive ...................................................... 9.5.26
Hydraulic ram / rotary coupling for the drum
variable-speed drive, exploded view .............................. 9.5.27
Assembling the hydraulic ram for the drum
variable-speed drive ...................................................... 9.5.28
Installing the hydraulic ram for the drum
variable-speed drive ...................................................... 9.5.28
Valve combinations – low-pressure hydraulics ...................... 9.6.1
Removing the 3/2 way low-pressure solenoid valve ........ 9.6.1
Solenoid valve and pressure relief valve for the
low-pressure hydraulics, exploded view .......................... 9.6.4
Installing the 3/2 way low-pressure solenoid valve .......... 9.6.5
Removing the pressure relief valve for the
low-pressure hydraulics ................................................... 9.6.6
Installing the pressure relief valve for the
low-pressure hydraulics ................................................... 9.6.7
Checking and adjusting the pressure relief
valve for the low-pressure hydraulics .............................. 9.6.8
Valve combinations – working hydraulics .............................. 9.7.1
Removing the grain tank unloading tube lock valve ........ 9.7.1
Grain tank unloading tube lock valve, exploded view ...... 9.7.1
Installing the grain tank unloading tube lock valve .......... 9.7.1
Removing the CLAAS Auto-Contour lock valve ............... 9.7.2
CLAAS Auto-Contour lock valve, exploded view ............. 9.7.2
Installing the CLAAS Auto-Contour lock valve ................ 9.7.3
Removing the working hydraulics pressure
relief valve ....................................................................... 9.7.3
Dismantling the working hydraulics
pressure relief valve ........................................................ 9.7.4
Working hydraulics pressure relief valve,
exploded view .................................................................. 9.7.5
Assembling the working hydraulics
pressure relief valve ........................................................ 9.7.6
Installing the working hydraulics
pressure relief valve ........................................................ 9.7.6
Testing and adjusting the working hydraulics
pressure relief valve ........................................................ 9.7.7
Removing the working hydraulics
valve block ....................................................................... 9.7.8
Installing the working hydraulics
valve block ....................................................................... 9.7.9
Removing the 3/3 way control valve for the
drum speed adjustment ................................................. 9.7.10
Dismantling the 3/3 way control valve for the
drum speed adjustment ................................................. 9.7.10
3/3 way control valve for the drum speed
adjustment, exploded view ............................................ 9.7.13
Assembling the 3/3 way control valve for the
drum speed adjustment ................................................. 9.7.14
Installing the 3/3 way control valve for the
drum speed adjustment ................................................. 9.7.15
Removing the 4/3 way solenoid valve for the
reel fore and aft adjustment and the
CLAAS Auto-Contour .................................................... 9.7.15
4/3 way solenoid valve for the reel fore and aft
adjustment and CLAAS Auto-Contour,
exploded view ................................................................ 9.7.16
Installing the 4/3 way solenoid valve for the
reel fore and aft adjustment and
CLAAS Auto-Contour .................................................... 9.7.17
Removing the rear working hydraulics
valve block ..................................................................... 9.7.17
Installing the rear working hydraulics
valve block ..................................................................... 9.7.19
Removing the 3/3 way solenoid valve for the
reel raise / lower and cutterbar raise / lower ................. 9.7.20
Dismantling the 3/3 way solenoid valve for the
reel raise / lower and cutterbar raise / lower ................. 9.7.20
3/3 way solenoid valve for the reel raise / lower
and cutterbar raise / lower, exploded view .................... 9.7.24
Assembling the 3/3 way solenoid valve for the
reel raise / lower and cutterbar raise / lower ................. 9.7.25
Installing the 3/3 way solenoid valve for the
reel raise / lower and cutterbar raise / lower ................. 9.7.26
Removing the 4/3 way solenoid valve for
swinging the grain tank unloading tube in and out ........ 9.7.26
4/3 way solenoid valve for swinging the grain
tank unloading tube in and out, exploded view ............. 9.7.27
Installing the 4/3 way solenoid valve for swinging
the grain tank unloading tube in and out ....................... 9.7.28
12. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 0.1.11
Contents
Removing the flow control valve for the
CLAAS Auto-Contour .................................................... 9.7.28
Flow control valve for the
CLAAS Auto-Contour, exploded view ............................ 9.7.29
Installing the flow control valve for the
CLAAS Auto-Contour .................................................... 9.7.29
Ground hydraulics .................................................................. 9.8.1
Removing the hydrostatic pump ...................................... 9.8.1
Installing the hydrostatic pump ........................................ 9.8.4
Adjusting the hydrostatic pump ....................................... 9.8.7
Removing the hydrostatic motor ...................................... 9.8.9
Installing the hydrostatic motor ...................................... 9.8.11
Bleeding the hydrostatic system .................................... 9.8.13
Bleeding the CLAAS 4-trac system ............................... 9.8.14
Measuring the high pressure / charge pressure /
purge pressure .............................................................. 9.8.15
Hydraulic oil cooler ................................................................. 9.9.1
Removing the hydraulic oil cooler for the
hydrostatic ground drive .................................................. 9.9.1
Installing the hydraulic oil cooler for the
hydrostatic ground drive .................................................. 9.9.2
10. Engine
Engine P.T.O. ...................................................................... 10.1.1
Removing the engine output shaft ................................. 10.1.1
Engine output, exploded view
DOMINATOR 108 VX
MERCEDES OM 366 LA ............................................... 10.1.9
Installing the engine output shaft
DOMINATOR 108 VX
MERCEDES OM 366 LA ............................................. 10.1.10
Engine output, exploded view
DOMINATOR 98 VX
MERCEDES OM 366 LA.............................................. 10.1.12
Installing the engine output shaft
DOMINATOR 98 VX
MERCEDES OM 366 LA ............................................. 10.1.13
Engine output, exploded view
DOMINATOR 88 VX
PERKINS 1006.6 T ...................................................... 10.1.15
Installing the engine output shaft
DOMINATOR 88 VX
PERKINS 1006.6 T ...................................................... 10.1.16
Installing the engine output pulley
DOMINATOR 108 VX / 98 VX / 88 VX ........................ 10.1.18
Engine DOMINATOR 108 VX .............................................. 10.2.1
Removing the engine
DOMINATOR 108 VX
MERCEDES OM 366 LA ............................................... 10.2.1
Installing the engine
DOMINATOR 108 VX
MERCEDES OM 366 LA ............................................... 10.2.5
Engine DOMINATOR 98 VX ................................................ 10.3.1
Removing the engine
DOMINATOR 98 VX
MERCEDES OM 366 LA ............................................... 10.3.1
Installing the engine
DOMINATOR 98 VX
MERCEDES OM 366 LA ............................................... 10.3.5
Engine DOMINATOR 88 VX ............................................... 10.4.1
Removing the engine
DOMINATOR 88 VX
PERKINS 1006-60 TW .................................................. 10.4.1
Installing the engine
DOMINATOR 88 VX
PERKINS 1006-60 TW .................................................. 10.4.5
Engine accessories ............................................................. 10.5.1
Removing the rotary screen .......................................... 10.5.1
Rotary screen, exploded view ....................................... 10.5.2
Installing the rotary screen ............................................ 10.5.3
Removing the water cooler ........................................... 10.5.4
Cooling system, exploded view ................................... 10.5.11
Installing the water cooler ........................................... 10.5.12
Removing the fuel tank ............................................... 10.5.16
Fuel tank, exploded view ............................................. 10.5.18
Installing the fuel tank ................................................. 10.5.19
Bleeding the fuel system ............................................. 10.5.20
11. Index
Index .................................................................................... 11.1.1
13. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.1.1
Hand brake
HAND BRAKE
Removing the hand brake rope
Secure the machine so it will not roll away.
With the hand brake released, remove cotter pin
of pin (E) and remove it.
Unscrew Bowden cable retarder (F).
(Fig. 1)
Remove the cab door.
To do this, proceed as follows:
– Pull the driver's seat fully to the front.
– Unscrew the cover (A) on the left-hand side.
– Unscrew the panels (B and C).
– Remove passenger seat. To do this, unscrew
cover (D).
– Unscrew cover (L) and remove it.
(Fig. 2, 3)
– Loosen the two locks (V) and rotate by 90°.
– Slightly swing the door (K) to the front and
remove.
(Fig. 4)
1
2
3
4
Hand brake
14. 2.1.2 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Hand brake
Take out floor tray (M).
Unscrew lid (N).
(Fig. 5)
Remove insulation (O).
(Fig. 6)
Set concave adjusting lever (P) fully to the bottom.
Unscrew hexagon bolt (23). Watch out for
washers (12) and the Belleville spring (13)
which may fall out.
(Fig. 7, 12)
Unscrew yoke (4) together with the stop (3).
Take out wear strip (11).
Unscrew bracket (7).
(Fig. 8, 12)
5
6
7
8
15. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.1.3
Hand brake
Rear side of cab:
Push bracket (R) off of rope.
Pull end of rope (S) out of cab rear wall.
(Fig. 9)
Jack up machine at the front right-hand side.
Remove front right-hand drive wheel.
Unscrew clamps (T).
(Fig. 10)
Unscrew clamps (U).
Remove rope.
(Fig. 11)
9
10
11
16. 2.1.4 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Hand brake
Hand brake, exploded view
1 Brake light switch
2 Hexagon nut M 12 x 1.5 DIN 936
3 Stop
4 Yoke
5 Rope
6 Seal
7 Bracket
8 Hexagon bolt M 6 x 12 DIN 933-8.8
9 Contact washer A 6
10 Hexagon nut M 10 DIN 934
11 Wear strip
12 Washer
13 Belleville spring B 28 DIN 2093
14 Lock nut VM 12
15 Hand lever
16 Button
17 O-ring 12 x 2
18 Compression spring
19 Rod
20 Locking pawl
21 Ratchet
22 Expansion pin 5 x 12a DIN 8752
23 Pin
(Fig. 12)
12
17. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.1.5
Hand brake
Installing the hand brake rope
Screw the rope loosely to the machine frame
using the clamps (U and T).
(Fig. 13, 14)
Guide end of rope (S) through the cab rear wall and
clamp down with bracket (R).
Tighten clamps (U and T).
Install front right-hand drive wheel.
(Fig. 13, 14, 15)
Bolt the yoke (4) to the end of the rope together
with the stop (3).
Fasten yoke (4) along with the wear strip (11)
to the hand lever (15).
(Fig. 12, 16)
13
14
15
16
18. 2.1.6 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Hand brake
Bolt down hand lever (15) to the support (25) using
the hexagon bolt (23), washers (12) and Belleville
spring (13).
CAUTION!
Only slight pressure is allowed on the Belleville
spring (13) to allow easy movement of the
hand lever (15).
Bolt down the end of rope to the support (25) using the
bracket (7).
(Fig. 12, 17)
Functional check:
The indicator light (17) in the vehicle information unit
must light up after the hand lever has been moved
by one or two notches. This setting can be corrected
at the stop (3) if required.
(Fig. 12, 16, 17, 18)
Bolt down the lid (N) with the insulation (O) located
behind it.
Insert floor tray (M).
(Fig. 6, 19)
17
18
19
19. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.1.7
Hand brake
Install cab door.
– Insert door (K) and fasten using the locks (V).
(Fig. 20)
– Insert cover (L) and screw down.
– Install passenger seat (if provided).
– Screw down cover (D).
– Screw down panels (B and C).
– Screw down cover (A) at the left-hand side.
(Fig. 21, 22)
Bolt down the hand brake rope at the Bowden cable
retarder (F).
With the hand brake released, insert and secure
the pin (E).
Adjust the hand brake rope so at the yoke (G) that
the hand brake becomes effective after the first
3 to 4 teeth.
(Fig. 23)
20
21
22
23
20. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.2.1
Foot brake
FOOT BRAKE
Bleeding the brake system
1. Fill up the brake fluid container (A) on the
operator's platform to maximum level.
(Fig. 1)
2. Connect bleeding hose (B) with collecting
container to the bleed valve (C).
For drum brake (wheel brake cylinder)
(Fig. 2)
For disk brake (brake calliper)
(Fig. 3)
1
2
3
Foot brake
21. 2.2.2 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Foot brake
3. Loosen bleed valve (C) and push the corres-
ponding foot brake lever downwards.
4. Keep foot brake lever in the bottom position and
close bleed valve (C). Release foot brake lever.
Repeat this procedure as often as required to
make brake liquid leave the bleed hose without
any bubbles.
CAUTION!
Make sure there is enough brake liquid in the
brake liquid container (A) on the operator's
platform and in the collecting container.
Use only ATE brake fluid according to
SAE specification J 1703.
5. Perform a brake test.
(Fig. 1, 2, 3)
22. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.2.3
Foot brake
Removing the main brake cylinder
Drain the brake liquid and collect it in a collecting
container.
Unscrew brake lines (A) from the main brake
cylinder and plug them at both ends using plugs.
Remove the safety of pin (B) and pull out pin.
Unscrew hexagon bolts (C) and remove main
brake cylinder.
(Fig. 4)
Installing the main brake cylinder
Insert main brake cylinder and bolt down using
two hexagon bolts (C).
Adjust yoke (D) so that pin (B) can be easily
pushed in with the brake pedals at rest.
Maximum play = 0.5 mm
Secure pin (B).
Bleed brake system.
(Fig. 4, 5)
4
5
23. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.3.1
Air conditioner
AIR CONDITIONER
Important information on compressor-type
air conditioner
DANGER!
1. Avoid any contact with refrigerants.
Refrigerants may cause serious frostbites
or injuries.
2. Always wear safety glasses when working
on the air conditioner.
3. In case of eye or skin contact rinse with plenty
of sterilized or drinking water immediately and
consult a doctor.
4. Have maintenance and repair work be carried out
by specialised refrigerating equipment workshops
only.
5. Before dismantling the refrigerant circuit for main-
tenance and repair purposes, the refrigerant must
be sucked off using an approved and suitable
recovery unit.
6. Never drain refrigerants to the atmosphere.
7. Refrigerant forms toxic or corrosive substances
when reacting in direct contact with open flames
or hot metal surfaces.
8. Never use compressed air or oxygen to perform
a leak test of the air conditioner
– danger of explosion!
9. Never clean the air conditioner with a hot
water jet when filled – danger of explosion!
Air conditioner
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. 2.3.2 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Air conditioner
Important information on installing parts
in the compressor-type air conditioner
ATTENTION!
1. Keep refrigerant circuit absolutely free of dust and
moisture. To this end, plug all removed connectors
with suitable plugs.
2. Plugs of new parts should be removed
only immediately before their installation.
3. O-rings shall always be replaced.
4. Before connecting a refrigerant line, apply some
drops of refrigerant oil to the thread and the O-ring
seat.
5. Always use two wrenches when tightening and /
or loosening the refrigerant lines in order to avoid
twisting of the lines.
26. 297 977.0 - RHB DOMINATOER 108 VX – 88 VX 2.3.3
Air conditioner
Air conditioner – filling up refrigerant
(Air conditioning compressor Sanden Sd 5 h 14)
1. Before evacuating, check if the filter drier must
be replaced.
Checking the filter drier:
An indicator bead is provided at the control
orifice (E).
Blue colour = Filter drier ok
Pink colour = Replace filter drier
In addition to this, the filter drier must be replaced
after a major leak, e.g. a broken line, has occurred
in the refrigerant circuit.
2. Before filling up, the air conditioner must be
evacuated and a leak test must be carried out.
3. Filling up refrigerant:
Fill up refrigerant at the air conditioning compres-
sor connections (D, delivery side and S, suction
side).
ATTENTION!
Liquid must absolutely not be filled in at
connection (S)!
Use only refrigerant R134a. The required quantity
is approx. 1550 g (comply with the manufacturer's
instructions).
4. Check the refrigerant level at the control orifice (E)
of the filter drier, using the white float ball:
When the white float is at the bottom = lack of
refrigerant
When the white float is at the top = refrigerant
level ok
CAUTION!
The correct refrigerant level should be checked
immediately after the functional test of the
system. During extended periods of standstill
of the system, the liquid level may fall below
the control orifice despite the correct refrigerant
quantity being filled in.
(Fig. 1, 2)
1
2
27. 2.3.4 RHB DOMINATOER 108 VX – 88 VX - 297 977.0
Air conditioner
Checking / filling up refrigerant oil at the air
conditioning compressor
(Air conditioning compressor Sanden Sd 5 h 14)
NOTE: The oil level at the compressor must be
checked when a new air conditioning compressor
or a newly sealed air conditioning compressor is
installed.
1. Start diesel engine and let it run at lower idle
speed.
2. Start air conditioning compressor and let run
for 10 minutes. Shut down diesel engine.
3. Suck off refrigerant at the connections (D, delivery
side and S, suction side) of the air conditioning
compressor. Proceed very slowly in order to avoid
any refrigerant oil being sucked off as well
(comply with the manufacturer's instructions).
4. Unscrew dust cap (A) and screw out
oil filler plug (B).
5. Remove air conditioning compressor if necessary.
6. Rotate air conditioning compressor to a horizontal
position.
7. Rotate the counterweight (C) to the position
shown and insert oil level dipstick, Part No.
181 788.0 (or self-manufactured). While doing so,
the 30° angle of the oil level dipstick must make
contact with the compressor body.
X = 105 mm
W = 30°
Y = 3 mm (distance between marks)
8. The oil level must reach notch 15 (from the
bottom) of the oil level dipstick. Refill refrigerant
oil (SANDEN SP 20) if necessary.
9. Screw in oil filler plug (B) with a new O-ring
and tighten with a tightening torque of 20 Nm.
Put on dust cap (A) and screw in hexagon bolts
using liquid screw fastener, e.g. DELO-ML-5349.
10. Fill up air conditioner refrigerant.
(Fig. 3, 4, 5)
3
4
5