Circular 03/2020/TT-BYT: AMENDMENTS TO SOME ARTICLES OF THE CIRCULAR NO. 11/2018/TT-BYT DATED MAY 04, 2018 OF THE MINISTRY OF HEALTH ON QUALITY OF PHARMACEUTICAL PRODUCTS AND PHARMACEUTICAL STARTING MATERIALS
Circular 03/2020/TT-BYT issued January 22, 2020: Amendments to some Articles of the Circular No. 11/2018/TT-BYT dated May 04, 2018 of the Minister of Health on quality of pharmaceutical products and pharmaceutical starting materials
The Circular 11/2018/TT-BYT provides for application of quality standards of drugs (modern drugs, herbal drugs, vaccines and biological) and drug ingredients (except herbal ones); drug/drug ingredient tests and procedures for recall and handling of unconformable drugs.
Circular 23/2021/TT-BYT , issued December 09, 2021: Amendments to some legislative documents on medical equipment, pharmacy and population issued by the Minister of Health
Thông tư 17/2023/TT-BYT: Amend regulations on requirements for declared content of dietary supplements
From November 9, 2023, the declared content for dietary supplements must meet the following requirements:
(1) Declaring nutrient content
(2) Publication of health recommendations
This Circular provides for application and promulgation of Good Manufacturing Practices for pharmaceutical products and pharmaceutical starting materials (hereinafter referred to as “GMP”) and inspection of GMP compliance.
This Circular provides for emergency marketing authorization of COVID-19 vaccines (hereinafter referred to as “vaccines"), specifically:
1. Applications and procedures for vaccine marketing authorization issuance, renewal and amendment.
2. Requirements for clinical data in applications to ensure vaccine safety and effectiveness.
3. Exemption from one or more than one clinical trial phase and vaccines required to undergo phase 4 clinical trial in Vietnam.
This Circular provides for:
1. Principles and requirements of Good Manufacturing Practices (GMP) for health supplements and application of GMP by domestic manufacturers of health supplements.
2. Certificates equivalent to the Certificate of compliance with GMP for imported health supplements.
1. This Circular provides for:
a) Documentation requirements, procedures for issuance, renewal, revision and revocation of the marketing authorization of modern medicines, vaccines, biologicals, herbal drugs and medicinal materials (including active ingredients, semi-finished herbal ingredients, excipients, and capsule shells) for human use in Vietnam;
b) Required clinical data for assurance of safety and efficacy in the application;
c) Requirements for exemption from clinical trial or certain stages thereof in Vietnam; drugs that have to undergo Stage 4 clinical trial;
d) Rules for validation of marketing authorization applications (hereinafter referred to as “marketing application”) for drugs/medicinal materials, renewal and revision thereof;
đ) Rules for validation of applications for license to import drugs that are yet to be approved for marketing authorization (hereinafter referred to as “unapproved drugs”) in the cases specified in Point a Clause 43 Article 5 of Decree No. 155/2018/ND-CP dated November 12, 2018 providing amendments to regulations on business conditions under state management of the Ministry of Health of Vietnam (hereinafter referred to as “Decree No. 155/2018/ND-CP”);
e) Rules for organization and operation of Marketing Authorization Advisory Board (hereinafter referred to as “the Advisory Board”);
g) Procedures for validation of marketing applications, renewal and revision thereof; Procedures for validation of applications for the license to import unapproved drugs.
The Circular 21/2018/TT-BYT elaborates:
- Criteria for determining a traditional drug that is fully exempt from clinical trial, exempt from certain phases of clinical trial or required to undergo phase 4 of clinical trial or all phases of clinical trial and requirements for clinical data about drug safety and efficacy as the basis for issuance of the certificate of traditional drug marketing authorization.
- Applications and procedures for issuance, extension, adjustment and revocation of certificates of traditional drug/herbal material marketing authorization.
The Circular 11/2018/TT-BYT provides for application of quality standards of drugs (modern drugs, herbal drugs, vaccines and biological) and drug ingredients (except herbal ones); drug/drug ingredient tests and procedures for recall and handling of unconformable drugs.
Circular 23/2021/TT-BYT , issued December 09, 2021: Amendments to some legislative documents on medical equipment, pharmacy and population issued by the Minister of Health
Thông tư 17/2023/TT-BYT: Amend regulations on requirements for declared content of dietary supplements
From November 9, 2023, the declared content for dietary supplements must meet the following requirements:
(1) Declaring nutrient content
(2) Publication of health recommendations
This Circular provides for application and promulgation of Good Manufacturing Practices for pharmaceutical products and pharmaceutical starting materials (hereinafter referred to as “GMP”) and inspection of GMP compliance.
This Circular provides for emergency marketing authorization of COVID-19 vaccines (hereinafter referred to as “vaccines"), specifically:
1. Applications and procedures for vaccine marketing authorization issuance, renewal and amendment.
2. Requirements for clinical data in applications to ensure vaccine safety and effectiveness.
3. Exemption from one or more than one clinical trial phase and vaccines required to undergo phase 4 clinical trial in Vietnam.
This Circular provides for:
1. Principles and requirements of Good Manufacturing Practices (GMP) for health supplements and application of GMP by domestic manufacturers of health supplements.
2. Certificates equivalent to the Certificate of compliance with GMP for imported health supplements.
1. This Circular provides for:
a) Documentation requirements, procedures for issuance, renewal, revision and revocation of the marketing authorization of modern medicines, vaccines, biologicals, herbal drugs and medicinal materials (including active ingredients, semi-finished herbal ingredients, excipients, and capsule shells) for human use in Vietnam;
b) Required clinical data for assurance of safety and efficacy in the application;
c) Requirements for exemption from clinical trial or certain stages thereof in Vietnam; drugs that have to undergo Stage 4 clinical trial;
d) Rules for validation of marketing authorization applications (hereinafter referred to as “marketing application”) for drugs/medicinal materials, renewal and revision thereof;
đ) Rules for validation of applications for license to import drugs that are yet to be approved for marketing authorization (hereinafter referred to as “unapproved drugs”) in the cases specified in Point a Clause 43 Article 5 of Decree No. 155/2018/ND-CP dated November 12, 2018 providing amendments to regulations on business conditions under state management of the Ministry of Health of Vietnam (hereinafter referred to as “Decree No. 155/2018/ND-CP”);
e) Rules for organization and operation of Marketing Authorization Advisory Board (hereinafter referred to as “the Advisory Board”);
g) Procedures for validation of marketing applications, renewal and revision thereof; Procedures for validation of applications for the license to import unapproved drugs.
The Circular 21/2018/TT-BYT elaborates:
- Criteria for determining a traditional drug that is fully exempt from clinical trial, exempt from certain phases of clinical trial or required to undergo phase 4 of clinical trial or all phases of clinical trial and requirements for clinical data about drug safety and efficacy as the basis for issuance of the certificate of traditional drug marketing authorization.
- Applications and procedures for issuance, extension, adjustment and revocation of certificates of traditional drug/herbal material marketing authorization.
1. This Decree provides for pharmacy practice certificate; pharmacy business; export and import of drugs; registration of herbal ingredients, excipients, capsule shells; assessment of overseas drug manufacturers; power, method and procedures for recalling medicinal ingredients; handling of recalled medicinal ingredients; documents and procedures for issuance of certification of drug advertisement and drug price management.
2. This Decree applies to organizations and individuals in Vietnam and overseas whose operation involves pharmacy in Vietnam.
Indian regulatory requirements - industrial pharmacy 2Jafarali Masi
Indian Regulatory Requirements: Central Drug Standard Control Organization (CDSCO) and State Licensing Authority: Organization, Responsibilities, Certificate of Pharmaceutical Product (COPP), Regulatory requirements and approval procedures for New Drugs
Indian Regulatory Requirements: Central Drugs Standard Control Organization (CDSCO). The Central Drugs Standard Control Organization (CDSCO) under Directorate General of Health Services, Ministry of Health & Family Welfare, Government of India is the National Regulatory Authority (NRA) of India. The Drugs & Cosmetics Act,1940 and rules 1945 have entrusted various responsibilities to central & state regulators for regulation of drugs & cosmetics. Vision:
To Protect and Promote public health in India.
Mission:
To safeguard and enhance the public health by assuring the safety, efficacy and quality of drugs, cosmetics and medical devices. Functions of CDSCO
Certificate of Pharmaceutical Product (COPP): The certificate of pharmaceutical product (abbreviated: CPP) is a certificate issued in the format recommended by the World Health Organization (WHO).
COPP establishes the status of the pharmaceutical product and of the applicant for this certificate in the exporting country.
It is often mentioned in conjunction with the electronic Common Technical Document (eCTD). The Certificate of a Pharmaceutical Product is needed by the importing country when the product in question is intended for registration (licensing, authorization) or renewal (prolongation) of registration, with the scope of commercialization or distribution in that country. The Certificate of a Pharmaceutical Product is needed by the importing country when the product in question is intended for registration (licensing, authorization) or renewal (prolongation) of registration, with the scope of commercialization or distribution in that country.
COPP Importance: It is needed by the importing country when the product in question is infected for Registration (Licensing and Authorization) or renewal of registration.
With the scope of commercialization or distribution in that country.
Certification has been recommended by WHO to help undersized drug regulatory authorities or drug regulatory authorities without proper quality assurance facilities in importing countries to assess the quality of pharmaceutical products as a prerequisite of registration or importation. General Requirements for Submission of Application for Issue of COPP. Documents Required for Applying for Grating or
Revalidation of COPPS:
Application from the manufacturer.
Site master file (as specified under WHO TRS 823).
Cost of manufacturing license.
List of approved products.
List of products applied for issuance of COPPS.
List of SOPs and STPs.
Stability data (3 batches) accelerated/Real-time.
List of equipments and instruments.
List of technical staff, their qualification, and experience, and approval status.
Manufacturing layout plan.
Process validation for 3 batches of each product.
Schematic diagram of water system specifying circulation loop and MOC (Material of construction).
Schematic diagram of HVAC system specifying terminal filter configuration. Export data of the last 2 years in case of revalidation.
Flow chart
1. This Circular provides for information on labels, methods for labeling and package inserts of drugs and medicinal ingredients sold on the market; change of expiry dates of labeled drugs because of national defense and security, epidemic control or disaster recovery need.
2. This Circular does not apply to labels of:
a) Drugs and medicinal ingredients which are used for export but not yet registered in Vietnam;
b) Drugs imported for non-commercial purposes as regulated in Clause 1 Article 75 of the Government’s Decree No. 54/2017/ND-CP dated May 08, 2017 on guidelines for implementation of the Law on Pharmacy (hereinafter referred to as “Decree No. 54/2017/ND-CP”);
c) Drugs imported to meet urgent need of national defense and security, epidemic control or disaster recovery as regulated in Clause 1 Article 67 of the Decree No. 54/2017/ND-CP.
- This Circular provides for the activities relating to production, trading, product declaration, labeling and provision of instructions for use of functional foods such as
supplemented foods, health supplements and medical foods, including foods for special dietary uses.
- This Circular does not apply to nutritional formulas for children. Production, trading,
product declaration, labeling and provision of instructions for use of these products shall
comply with corresponding technical regulations and regulations of law on trading and use of nutritional products for children
The Circular 07/2017/TT-BYT provides:
+ Rules for compiling the list of OTC drugs, criteria for selection of OTC drugs;
+ List of OTC drugs; purposes and implementation thereof.
1. This Circular regulates the activities related to production, trading, product announcement, labeling and giving instructions on functional foods including supplemented foods, health protection foods, medical foods and foods used for special dietary uses.
2. This Circular does not apply to nutritional formula for children. The production, trading, product announcement, labeling and giving instructions for this product shall be implemented in accordance with corresponding technical regulations and the laws on trading and using nutritional products for children.
Drug and Cosmetic Act and Rules . A step towards regulating pharmaceutical development in India. To make the pharmaceutical industries abide by the rules and follow ethical guidelines for safety of humanity.
Qyết định 166/QD-BYT: Ban hành: “Tiêu chí, nguyên tắc đánh giá Hồ sơ kỹ thuật chung về thiết bị y tế theo quy định của ASEAN (Common Submission Dossier Template - CSDT) đối với thiết bị y tế không phải là thiết bị y tế in vitro”; Nội dung chi tiết tại Phụ lục I, II, III kèm theo Quyết định này
Nghị định này quy định về hành vi vi phạm hành chính, hình thức xử phạt, mức xử phạt, các biện pháp khắc phục hậu quả, thẩm quyền lập biên bản, thẩm quyền xử phạt vi phạm hành chính trong lĩnh vực văn hóa và quảng cáo.
2. Các hành vi vi phạm hành chính trong lĩnh vực văn hóa và quảng cáo không quy định
tại Nghị định này thì áp dụng theo quy định về xử phạt vi phạm hành chính trong các lĩnh
vực quản lý nhà nước có liên quan.
More Related Content
Similar to Circular 03/2020/TT-BYT: AMENDMENTS TO SOME ARTICLES OF THE CIRCULAR NO. 11/2018/TT-BYT DATED MAY 04, 2018 OF THE MINISTRY OF HEALTH ON QUALITY OF PHARMACEUTICAL PRODUCTS AND PHARMACEUTICAL STARTING MATERIALS
1. This Decree provides for pharmacy practice certificate; pharmacy business; export and import of drugs; registration of herbal ingredients, excipients, capsule shells; assessment of overseas drug manufacturers; power, method and procedures for recalling medicinal ingredients; handling of recalled medicinal ingredients; documents and procedures for issuance of certification of drug advertisement and drug price management.
2. This Decree applies to organizations and individuals in Vietnam and overseas whose operation involves pharmacy in Vietnam.
Indian regulatory requirements - industrial pharmacy 2Jafarali Masi
Indian Regulatory Requirements: Central Drug Standard Control Organization (CDSCO) and State Licensing Authority: Organization, Responsibilities, Certificate of Pharmaceutical Product (COPP), Regulatory requirements and approval procedures for New Drugs
Indian Regulatory Requirements: Central Drugs Standard Control Organization (CDSCO). The Central Drugs Standard Control Organization (CDSCO) under Directorate General of Health Services, Ministry of Health & Family Welfare, Government of India is the National Regulatory Authority (NRA) of India. The Drugs & Cosmetics Act,1940 and rules 1945 have entrusted various responsibilities to central & state regulators for regulation of drugs & cosmetics. Vision:
To Protect and Promote public health in India.
Mission:
To safeguard and enhance the public health by assuring the safety, efficacy and quality of drugs, cosmetics and medical devices. Functions of CDSCO
Certificate of Pharmaceutical Product (COPP): The certificate of pharmaceutical product (abbreviated: CPP) is a certificate issued in the format recommended by the World Health Organization (WHO).
COPP establishes the status of the pharmaceutical product and of the applicant for this certificate in the exporting country.
It is often mentioned in conjunction with the electronic Common Technical Document (eCTD). The Certificate of a Pharmaceutical Product is needed by the importing country when the product in question is intended for registration (licensing, authorization) or renewal (prolongation) of registration, with the scope of commercialization or distribution in that country. The Certificate of a Pharmaceutical Product is needed by the importing country when the product in question is intended for registration (licensing, authorization) or renewal (prolongation) of registration, with the scope of commercialization or distribution in that country.
COPP Importance: It is needed by the importing country when the product in question is infected for Registration (Licensing and Authorization) or renewal of registration.
With the scope of commercialization or distribution in that country.
Certification has been recommended by WHO to help undersized drug regulatory authorities or drug regulatory authorities without proper quality assurance facilities in importing countries to assess the quality of pharmaceutical products as a prerequisite of registration or importation. General Requirements for Submission of Application for Issue of COPP. Documents Required for Applying for Grating or
Revalidation of COPPS:
Application from the manufacturer.
Site master file (as specified under WHO TRS 823).
Cost of manufacturing license.
List of approved products.
List of products applied for issuance of COPPS.
List of SOPs and STPs.
Stability data (3 batches) accelerated/Real-time.
List of equipments and instruments.
List of technical staff, their qualification, and experience, and approval status.
Manufacturing layout plan.
Process validation for 3 batches of each product.
Schematic diagram of water system specifying circulation loop and MOC (Material of construction).
Schematic diagram of HVAC system specifying terminal filter configuration. Export data of the last 2 years in case of revalidation.
Flow chart
1. This Circular provides for information on labels, methods for labeling and package inserts of drugs and medicinal ingredients sold on the market; change of expiry dates of labeled drugs because of national defense and security, epidemic control or disaster recovery need.
2. This Circular does not apply to labels of:
a) Drugs and medicinal ingredients which are used for export but not yet registered in Vietnam;
b) Drugs imported for non-commercial purposes as regulated in Clause 1 Article 75 of the Government’s Decree No. 54/2017/ND-CP dated May 08, 2017 on guidelines for implementation of the Law on Pharmacy (hereinafter referred to as “Decree No. 54/2017/ND-CP”);
c) Drugs imported to meet urgent need of national defense and security, epidemic control or disaster recovery as regulated in Clause 1 Article 67 of the Decree No. 54/2017/ND-CP.
- This Circular provides for the activities relating to production, trading, product declaration, labeling and provision of instructions for use of functional foods such as
supplemented foods, health supplements and medical foods, including foods for special dietary uses.
- This Circular does not apply to nutritional formulas for children. Production, trading,
product declaration, labeling and provision of instructions for use of these products shall
comply with corresponding technical regulations and regulations of law on trading and use of nutritional products for children
The Circular 07/2017/TT-BYT provides:
+ Rules for compiling the list of OTC drugs, criteria for selection of OTC drugs;
+ List of OTC drugs; purposes and implementation thereof.
1. This Circular regulates the activities related to production, trading, product announcement, labeling and giving instructions on functional foods including supplemented foods, health protection foods, medical foods and foods used for special dietary uses.
2. This Circular does not apply to nutritional formula for children. The production, trading, product announcement, labeling and giving instructions for this product shall be implemented in accordance with corresponding technical regulations and the laws on trading and using nutritional products for children.
Drug and Cosmetic Act and Rules . A step towards regulating pharmaceutical development in India. To make the pharmaceutical industries abide by the rules and follow ethical guidelines for safety of humanity.
this part describes the UAE Federal Law No: 4 of 1983 on Pharmaceutical Profession and Institutions
Similar to Circular 03/2020/TT-BYT: AMENDMENTS TO SOME ARTICLES OF THE CIRCULAR NO. 11/2018/TT-BYT DATED MAY 04, 2018 OF THE MINISTRY OF HEALTH ON QUALITY OF PHARMACEUTICAL PRODUCTS AND PHARMACEUTICAL STARTING MATERIALS (20)
Qyết định 166/QD-BYT: Ban hành: “Tiêu chí, nguyên tắc đánh giá Hồ sơ kỹ thuật chung về thiết bị y tế theo quy định của ASEAN (Common Submission Dossier Template - CSDT) đối với thiết bị y tế không phải là thiết bị y tế in vitro”; Nội dung chi tiết tại Phụ lục I, II, III kèm theo Quyết định này
Nghị định này quy định về hành vi vi phạm hành chính, hình thức xử phạt, mức xử phạt, các biện pháp khắc phục hậu quả, thẩm quyền lập biên bản, thẩm quyền xử phạt vi phạm hành chính trong lĩnh vực văn hóa và quảng cáo.
2. Các hành vi vi phạm hành chính trong lĩnh vực văn hóa và quảng cáo không quy định
tại Nghị định này thì áp dụng theo quy định về xử phạt vi phạm hành chính trong các lĩnh
vực quản lý nhà nước có liên quan.
- Thông tư này quy định các hoạt động liên quan đến sản xuất, kinh doanh, công bố sản
phẩm, ghi nhãn và hướng dẫn sử dụng thực phẩm chức năng bao gồm thực phẩm bổ
sung, thực phẩm bảo vệ sức khỏe và thực phẩm dinh dưỡng y học, kể cả thực phẩm dùng
cho chế độ ăn đặc biệt.
- Thông tư này không áp dụng đối với sản phẩm dinh dưỡng công thức dùng cho trẻ
nhỏ. Việc sản xuất, kinh doanh, công bố sản phẩm, ghi nhãn và hướng dẫn sử dụng sản phẩm này được thực hiện theo quy chuẩn kỹ thuật tương ứng và quy định của pháp luật
về kinh doanh và sử dụng các sản phẩm dinh dưỡng dùng cho trẻ nhỏ
Trình bày những cập nhật, sửa đổi về quy định của pháp luật trong ngành dược, bao gồm:
+ Quy định về đăng ký thuốc, ghi nhãn thuốc, thuốc gia công, chuyển giao công tại Việt Nam.
+ Quy định kê đơn thuốc bằng hình thức điện tử
+ Quy định về hoạt động dược lâm sàng
+ Quy định về quản lý chất lượng thuốc
Căn cứ vào công văn số 2098/BYT-TB-CT ngày 12/04/2023 của Bộ Y tế đề nghị các cơ sở đã thực hiện Công bố hồ sơ Trang thiết bị y tế trên Hệ thống dịch vụ công trực tuyến về quản lý thiết bị y tế (https://dmec.moh.gov.vn) tổ chức rà soát các nội dung theo quy định đối với các thủ tục sau:
- thủ tục đủ điều kiện sản xuất trang thiết bị y tế
- thủ tục công bố đủ điều kiện mua bán trang thiết bị y tế thuộc loại B, C, D
- thủ tục công bố tiêu chuẩn áp dụng đối với trang thiết bị y tế thuộc loại A, B:
Xác nhận lại thông tin về tiêu chuẩn áp dụng và đảm bảo rằng chúng đáp ứng đúng yêu cầu.
Thu hồi số công bố nếu phát hiện không tuân thủ đúng tiêu chuẩn áp dụng.
1. Nghị định này quy định chi tiết một số điều của Luật Khám bệnh, chữa bệnh về:
a) Cấp giấy phép hành nghề khám bệnh, chữa bệnh;
b) Cấp giấy phép hoạt động khám bệnh, chữa bệnh;
c) Áp dụng kỹ thuật mới, phương pháp mới và thử nghiệm lâm sàng trong khám bệnh, chữa bệnh;
d) Quản lý thiết bị y tế tại cơ sở khám bệnh, chữa bệnh;
đ) Huy động, điều động cơ sở khám bệnh, chữa bệnh tham gia hoạt động khám bệnh, chữa bệnh trong trường hợp xảy ra thiên tai, thảm họa, dịch bệnh truyền nhiễm thuộc nhóm A và tình trạng khẩn cấp;
e) Điều kiện bảo đảm cho hoạt động khám bệnh, chữa bệnh;
g) Hướng dẫn các quy định về lộ trình thực hiện; quy định chuyển tiếp liên quan đến giấy phép hành nghề và giấy phép hoạt động.
Nghị định này quy định về Chứng chỉ hành nghề dược; kinh doanh
dược; xuất khẩu, nhập khẩu thuốc; đăng ký lưu hành dược liệu, tá dược, vỏ
nang; đánh giá cơ sở sản xuất thuốc tại nước ngoài; thẩm quyền, hình thức,
thủ tục thu hồi nguyên liệu làm thuốc, biện pháp xử lý nguyên liệu làm thuốc
bị thu hồi; hồ sơ, trình tự thủ tục và thẩm quyền cấp giấy xác nhận nội dung
thông tin, quảng cáo thuốc và biện pháp quản lý giá thuốc.
2. Nghị định này áp dụng đối với cơ quan, tổ chức, cá nhân trong nước
và nước ngoài có hoạt động liên quan đến dược tại Việt Nam.
Decree 154/2018/ND-CP issued Hanoi, November 09, 2018: Amending, supplementing and repealing certain articles of the Government on investment and business conditions in sectors under management of ministry of science and technology and certain regulations on specialized inspections
This Decree prescribes conditions for provision of conformity assessment services in Vietnam, including conditions for organizations to assess conformity of products and goods, production or service provision processes and environment with announced applicable standards or relevant technical regulations, and conditions for organizations to accredit conformity assessment organizations.
Nghị định này quy định về điều kiện kinh doanh dịch vụ đánh giá sự phù hợp tại Việt Nam gồm: Tổ chức đánh giá sự phù hợp đối với sản phẩm, hàng hóa, quá trình sản xuất, cung ứng dịch vụ, môi trường phù hợp với tiêu chuẩn công bố áp dụng, quy chuẩn kỹ thuật tương ứng và tổ chức công nhận tổ chức đánh giá sự phù hợp.
Ngày 04/10/2021, Thủ tướng Chính phủ đã phê duyệt Quyết định số 1661/QĐ-TTg, về phương án cắt giảm và đơn giản hóa các quy định liên quan đến hoạt động kinh doanh thuộc phạm vi quản lý của Bộ Y tế. Quyết định này bao gồm tổng cộng 153 quy định về thủ tục hành chính và 14 quy định về điều kiện kinh doanh.
Theo đó, chính sách này thực hiện quan điểm nhằm tạo điều kiện thuận lợi nhất cho doanh nghiệp và người dân tham gia hoạt động kinh doanh. Mục tiêu là giảm thiểu thời gian và chi phí cho doanh nghiệp và người dân trong việc tuân thủ các quy định liên quan đến hoạt động kinh doanh. Đồng thời, chính phủ cũng hướng tới việc cắt giảm và đơn giản hóa các quy định không cần thiết, không hợp lý, không hợp pháp, cái mà thường tạo rào cản và gây khó khăn cho hoạt động kinh doanh của doanh nghiệp và người dân. Chính sách này được xem là một bước quan trọng nhằm nâng cao hiệu lực, hiệu quả và đảm bảo mục tiêu quản lý nhà nước, đồng thời thúc đẩy sự phát triển của doanh nghiệp.
On January 2, 2024, the Ministry of Health issued Decision No. 04/QD-BYT regarding the designation of units for assessment of the Common Technical Dossier on medical devices according to the ASEAN regulations.
The decision includes:
1. Designation of units responsible for assessment of the Common Technical Dossier by the ASEAN regulations:
- For documentation related to the issuance of circulation numbers for medical devices that are not in vitro diagnostic medical devices: Institute of Medical Device and Health Works.
- For documentation related to the issuance of circulation numbers for in vitro diagnostic medical devices: National Testing Institute for Vaccine and Medical Biologicals.
2. Valid date of the Decision: January 2, 2024.
Ngày 30 tháng 12 năm 2023, Bộ Y Tế ban hành Công văn số 8329/BYT-HTTB- kiểm tra, rà soát thủ tục công bố trang thiết bị y tế, gửi Sở Y Tế tỉnh, thành phố trực thuộc trung ương đề nghị Sở Y Tế khẩn trương thực hiện các nội dung sau:
- Thực hiện rà soát lại các hồ sơ công bố trang thiết bị y tế trên Hệ thống https://dmec.moh.gov.vn theo đúng quy định và các văn bản liên quan (lưu ý rà soát kết quả phân loại trang thiết bị y tế bảo đảm theo đúng quy định về phân loại trang thiết bị y tế);
- Kiểm tra về tính hợp pháp, chính xác của các giấy tờ, tài liệu đã nộp trong hồ sơ và bảo đảm các giấy tờ, tài liệu của hồ sơ luôn còn hiệu lực trong suốt quá trình thực hiện, đồng thời chịu trách nhiệm lưu giữ các giấy tờ, tài liệu trong hồ sơ đã nộp theo quy định
Ngày 02 tháng 01 năm 2024, Bộ y tế ban hành quyết định số 04/QĐ-BYT- Về việc chỉ định đơn vị thẩm định hồ sơ kỹ thuật chung về trang thiết bị y tế theo quy định của ASEAN.
- Quyết định gồm các nội dung sau:
1. Chỉ định các đơn vị tiến hành thẩm định hồ sơ kỹ thuật chung về TTBYT theo quy định của ASEAN
+ Đối với hồ sơ đề nghị cấp số lưu hành TTBYT không phải trang thiết bị y tế chẩn đoán in vitro: Viện Trang thiết bị và Công trình y tế
+ Đối với hồ sơ đề nghị cấp số lưu hành TTBYT chẩn đoán in vitro : Viện Kiểm định Quốc gia Vắc xin và Sinh phẩm y tế
2. Hiệu lực thi hành của Quyết định: Ngày 02 tháng 01 năm 2024
Thông tư này hướng dẫn nội dung, cách ghi thành phần dinh dưỡng, giá trị dinh dưỡng và lộ trình thực hiện đối với thực phẩm bao gói sẵn được sản xuất, kinh doanh, nhập khẩu, lưu thông tại Việt Nam.
This Circular provides guidance on contents and presentation of nutrients and their values (hereinafter referred to as "nutrition facts") on food labels, and the roadmap for implementation with regard to prepackaged foods that are manufactured, sold, imported into, circulated in Vietnam.
1. Thông tư này quy định Danh mục chất cấm sử dụng trong sản xuất, kinh doanh thực phẩm bảo vệ sức khỏe.
2. Thông tư này áp dụng đối với tổ chức, cá nhân Việt Nam; tổ chức, cá nhân nước ngoài tại Việt Nam tham gia sản xuất, kinh doanh thực phẩm bảo vệ sức khỏe; tổ chức, cá nhân có hoạt động liên quan đến thực phẩm bảo vệ sức khỏe tại Việt Nam.
1. This Circular prescribes the Nomenclature List of agents prohibited from production and business of health protection food.
2. This Circular shall apply to domestic entities and persons; foreign entities and persons in Vietnam that are involved in production and business of health protection food; entities and persons whose operations relate to health protection food in Vietnam.
Ngày 03/3/2023, Chính phủ ban hành Nghị định 07/2023/NĐ-CP sửa đổi Nghị định 98/2021/NĐ-CP về quản lý trang thiết bị y tế.
Theo đó, nội dung niêm yết giá trang thiết bị y tế được quy định như sau:
- Tổ chức, cá nhân sản xuất, kinh doanh trang thiết bị y tế thực hiện niêm yết giá trang thiết bị y tế tại các địa điểm theo quy định tại Điều 17 Nghị định 177/2013/NĐ-CP hướng dẫn Luật Giá hoặc trên Cổng thông tin điện tử của Bộ Y tế.
- Trường hợp niêm yết giá trang thiết bị y tế trên Cổng thông tin điện tử của Bộ Y tế phải có đầy đủ các thông tin tối thiểu sau:
+ Tên, chủng loại trang thiết bị y tế.
+ Hãng, nước sản xuất; hãng, nước chủ sở hữu.
+ Đơn vị tính.
+ Cấu hình, tính năng kỹ thuật của trang thiết bị y tế.
+ Giá niêm yết của trang thiết bị y tế.
On March 3, 2023, the Government issued Decree 07/2023/ND-CP amending Decree 98/2021/ND-CP on medical equipment management.
Accordingly, the content of medical equipment price listing is regulated as follows:
- Organizations and individuals producing and trading medical equipment shall list prices of medical equipment at locations as prescribed in Article 17 of Decree 177/2013/ND-CP guiding the Price Law or on the Electronic Information Portal of the Ministry of Health.
- In case of listing medical equipment prices on the Ministry of Health's Electronic Information Portal, the following minimum information must be included:
+ Name and type of medical equipment.
+ Manufacturing company and country; firm, owner country.
+ Unit of calculation.
+ Configuration and technical features of medical equipment.
+ Listed price of medical equipment.
More from MedGate Vietnam| Regulatory Affairs of Pharmaceutical, Medical Devices, Cosmetic (20)
01062024_First India Newspaper Jaipur.pdfFIRST INDIA
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
‘वोटर्स विल मस्ट प्रीवेल’ (मतदाताओं को जीतना होगा) अभियान द्वारा जारी हेल्पलाइन नंबर, 4 जून को सुबह 7 बजे से दोपहर 12 बजे तक मतगणना प्रक्रिया में कहीं भी किसी भी तरह के उल्लंघन की रिपोर्ट करने के लिए खुला रहेगा।
03062024_First India Newspaper Jaipur.pdfFIRST INDIA
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
An astonishing, first-of-its-kind, report by the NYT assessing damage in Ukraine. Even if the war ends tomorrow, in many places there will be nothing to go back to.
In a May 9, 2024 paper, Juri Opitz from the University of Zurich, along with Shira Wein and Nathan Schneider form Georgetown University, discussed the importance of linguistic expertise in natural language processing (NLP) in an era dominated by large language models (LLMs).
The authors explained that while machine translation (MT) previously relied heavily on linguists, the landscape has shifted. “Linguistics is no longer front and center in the way we build NLP systems,” they said. With the emergence of LLMs, which can generate fluent text without the need for specialized modules to handle grammar or semantic coherence, the need for linguistic expertise in NLP is being questioned.
हम आग्रह करते हैं कि जो भी सत्ता में आए, वह संविधान का पालन करे, उसकी रक्षा करे और उसे बनाए रखे।" प्रस्ताव में कुल तीन प्रमुख हस्तक्षेप और उनके तंत्र भी प्रस्तुत किए गए। पहला हस्तक्षेप स्वतंत्र मीडिया को प्रोत्साहित करके, वास्तविकता पर आधारित काउंटर नैरेटिव का निर्माण करके और सत्तारूढ़ सरकार द्वारा नियोजित मनोवैज्ञानिक हेरफेर की रणनीति का मुकाबला करके लोगों द्वारा निर्धारित कथा को बनाए रखना और उस पर कार्यकरना था।
31052024_First India Newspaper Jaipur.pdfFIRST INDIA
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
Circular 03/2020/TT-BYT: AMENDMENTS TO SOME ARTICLES OF THE CIRCULAR NO. 11/2018/TT-BYT DATED MAY 04, 2018 OF THE MINISTRY OF HEALTH ON QUALITY OF PHARMACEUTICAL PRODUCTS AND PHARMACEUTICAL STARTING MATERIALS
1. THE MINISTRY OF HEALTH
-------
THE SOCIALIST REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
---------------
No. 03/2020/TT-BYT Hanoi, January 22, 2020
CIRCULAR
AMENDMENTS TO SOME ARTICLES OF THE CIRCULAR NO. 11/2018/TT-BYT DATED MAY 04,
2018 OF THE MINISTRY OF HEALTH ON QUALITY OF PHARMACEUTICAL PRODUCTS AND
PHARMACEUTICAL STARTING MATERIALS
Pursuant to the Law on Pharmacy No. 105/2016/QH13 dated April 06, 2016;
Pursuant to the Government’s Decree No. 54/2017/ND-CP dated May 08, 2017 on guidelines for the
implementation of the Law on Pharmacy;
Pursuant to the Government’s Decree No. 155/2018/ND-CP dated May 08, 2017 on amendments to
some Articles related to business conditions under state management of the Ministry of Health;
Pursuant to the Government’s Decree No. 75/2017/ND-CP dated June 20, 2017 defining functions,
tasks, powers and organizational structure of the Ministry of Health;
At the request of the Director General of the Drug Administration of Vietnam,
The Ministry of Health hereby promulgates a Circular on amendments to some Articles of the Circular
No. 11/2018/TT-BYT dated May 04, 2018 of the Minister of Health on quality of pharmaceutical
products and pharmaceutical starting materials.
Article 1. Amendments to some Articles of the Circular No. 11/2018/TT-BYT dated May 04, 2018
of the Minister of Health on quality of pharmaceutical products and pharmaceutical starting
materials
1. Article 1 is amended as follows:
“This Circular provides for application of quality standards for pharmaceutical products (modern
pharmaceutical products, herbal medicinal products, vaccines and biologicals) and pharmaceutical
starting materials (including semi-finished and finished ones, excluding herbal materials);
pharmaceutical product and pharmaceutical starting material tests and procedures for recall and
handling of violating pharmaceutical products.”
2. Clause 1 of Article 7 is amended as follows:
“1. Apply quality standards to pharmaceutical product and pharmaceutical starting material tests:
a) The test must be carried out in accordance with the approved and updated pharmaceutical
product/pharmaceutical starting material quality standards.
If the pharmaceutical product/pharmaceutical starting material quality standard is yet to be updated,
the testing facility shall use the equivalent pharmacopeia specified in Clauses 1 and 2 Article 6 of this
Circular, based on the production date of the pharmaceutical product/pharmaceutical starting material
quality standard being tested.
If the pharmaceutical product is prepared in a health facility, the test is carried out in accordance with
the pharmaceutical product quality standards formed and promulgated by the facility.
b) If a testing method specified in the pharmaceutical product/pharmaceutical starting material quality
standard contains errors, thereby failing to ensure the accuracy or trueness or a qualitative test is non-
specific or an herbal medicinal product to which the addition of an active ingredient/chemical
substance is suspected (the pharmaceutical product has side effects or unreported side effects, or
foreign pharmaceutical regulatory agencies inform that the pharmaceutical product/pharmaceutical
starting material contains impurities, the state-owned pharmaceutical product testing facility is entitled
to apply the analytical/testing methods specified in the pharmacopoeia or validated according to the
guidelines on analytical method validation enclosed with the Circular No. 32/2018/TT-BYT dated
November 12, 2018 of the Minister of Health. The head of the pharmaceutical product testing facility
shall be responsible to the law for its test results.”
MEDGATE TECHNOLOGY AND
INVESTMENT JOINT STOCK COMPANY
Hotline: 098.546.1894
Website: medgate.vn
2. 3. Point c Clause 3 of Article 7 is amended as follows:
“c) The testing facility must present the test/analysis results of the pharmaceutical product sample
within 20 days after receiving it in the following cases:
- The pharmaceutical product requires testing before marketing as specified in Clause 1 Article 8 of
this Circular, except for the vaccine or biological that is serum containing antibodies and derivatives of
human blood and plasma as specified in Clause 2 Article 10 of this Circular.
- The pharmaceutical product does not fit any of the cases mentioned in Points b and d of this
Clause.”
4. Clause 6 of Article 7 is amended as follows:
“6. Archiving records and documents:
a) The records and documents on pharmaceutical product/pharmaceutical starting material quality
inspection must be archived as specified in the Law on Archives, Decrees elaborating the Law on
Archives and Circular No. 53/2017/TT-BYT dated December 29, 2017 of the Minister of Health.
b) After the end of their archiving periods, the records and documents shall be handled in accordance
with regulations of the Law on Archives.”
5. Clause 3 of Article 8 is amended as follows:
“3. The Ministry of Health (Drug Administration of Vietnam) shall designate GLP-compliant testing
facilities to carry out pharmaceutical product tests specified in Clause 1 of this Article, including:
a) GLP-compliant testing facilities specified in Article 1 Article 35 of the Law on Pharmacy, including
state-owned ones;
b) Pharmaceutical product/pharmaceutical starting material testing service providers granted the
Certificate of eligibility for pharmacy business that allows pharmaceutical product testing;
c) GLP-compliant testing facilities affiliated to SRA - Stringent Regulatory Authorities or designated by
these authorities to carry out pharmaceutical product/pharmaceutical starting material tests to serve
pharmaceutical product quality management;
d) National public testing facilities that prequalified and published by WHO according to the
pharmaceutical product testing laboratory prequalification program.
If the testing facility does not have sufficient capacity for carrying out one or multiple tests, the testing
facility must notify the producer/importer and cooperate with the latter in sending samples to other
GLP-compliant testing facilities or ISO/IEC 17025 compliant laboratories which have capacity for
carrying out those tests.”
6. Point d is added to Clause 6 of Article 8 as follows:
“d) Select a testing facility that satisfies the regulation laid down in Point a Clause 3 of this Article so
that samples are sent to such testing facility. If the testing facility does not have sufficient capacity for
testing one or multiple quality criteria, the testing facility must cooperate with the testing facility in
sending sealed samples to the testing facility that has capacity for testing those criteria.”
7. Title of Clause 2 of Article 10 is amended as follows:
“Within 60 days from the date on which all samples and documents specified in Article 11 of this
Circular are received, the National Institute for Control of Vaccines and Biologicals shall:”
8. Point c Clause 1 of Article 11 is amended as follows:
“b) The vaccine/biological samples to be tested on (the number of samples for each kind of
vaccine/biological is specified in the Guidelines of the Ministry of Health for lot release testing of
vaccines and biologicals which are seria containing antibodies and derivatives of human blood and
plasma);”
9. Point b Clause 2 of Article 11 is amended as follows:
“b) The vaccine/biological samples to be tested on (the number of samples for each kind of
vaccine/biological is specified in the Guidelines of the Ministry of Health for lot release testing of
vaccines and biologicals which are seria containing antibodies and derivatives of human blood and
plasma);”
10. Clause 4 is added to Article 11 as follows:
“4. The lot summary protocols shall be made according to WHO guidelines provided in the Form No.
3. 09 in the Appendix II hereof.”
11. Article 14 is amended as follows:
“Article 14. Handling of pharmaceutical products not meeting quality standards by place of
collection
1. In the case of violating pharmaceutical product samples collected by quality inspection authorities
from retailers, level-III and level-IV health facilities (hereinafter referred to as “retailers”):
a) Within 24 hours from the time the testing facility’s test/analysis report is received, the Department of
Health shall seal the substandard pharmaceutical products at the facility where the samples were
collected from;
b) Within 48 hours from the time the testing facility’s test/analysis report is received, the Ministry of
Health (Drug Administration of Vietnam) request shall request the responsible pharmaceutical product
registrant/producer/importer in writing to cooperate with the distributor in:
- reporting its pharmaceutical distribution to wholesalers, health facilities at level II or higher (number
of pharmaceutical products manufactured and imported; name and address of the pharmaceutical
product purchasers, number of pharmaceutical products purchased and number of pharmaceutical
products in stock) to the Ministry of Health (Drug Administration of Vietnam) and Department of Health
within 07 days from the date on which the written request is made;
- requesting and cooperating with quality inspection authorities to collect additional samples from
domestic pharmaceutical product manufacturers or importers, and from at least 02 pharmaceutical
product trading establishments as prescribed in Clause 4 of this Article; sending a report thereon to
the Ministry of Health (Drug Administration of Vietnam) within 15 days from the date on which the
written request is made;
- sending samples to central testing facilities in order to have the unfulfilled criteria tested.
c) According to the result of testing of additional samples, the Drug Administration of Vietnam shall
follow the instructions provided in Clause 5 of this Article.
2. In the case of violating pharmaceutical product samples collected by quality inspection authorities
from wholesalers, level-II or above health facilities (hereinafter referred to as “wholesalers”):
a) Within 24 hours from the time the testing facility’s test/analysis report is received, the Department of
Health shall seal the substandard pharmaceutical products at the facility where the samples were
collected from;
b) Within 48 hours from the time the testing facility’s test/analysis report is received, the Ministry of
Health (Drug Administration of Vietnam) shall identify the violation’s seriousness and draw the
conclusion on recalling the violating pharmaceutical product as specified in Appendix II issued
together with this Circular, and shall:
- issue the pharmaceutical product recall decision within the province or central-affiliated city where
the samples were collected from and the pharmaceutical product trading establishments provided with
pharmaceutical products by wholesalers from which samples were collected as specified in Clauses 3
and 4 Article 12 of this Circular;
- request the responsible registrant, producer or importer in writing to cooperate with the distributor in:
+ reporting its pharmaceutical distribution to wholesalers (number of pharmaceutical products
imported; name and address of the pharmaceutical product purchasers, number of pharmaceutical
products purchased and number of pharmaceutical products in stock) to the Ministry of Health (Drug
Administration of Vietnam) within 07 days from the written request is made;
+ requesting and cooperating with quality inspection authorities to collect additional samples from
domestic pharmaceutical product manufacturers or importers as prescribed in Clause 4 of this Article;
sending a report thereon to the Ministry of Health (Drug Administration of Vietnam) within 15 days from
the date on which the written request is made;
+ sending samples to central testing facilities in order to have the unfulfilled criteria tested.
c) According to the result of testing of additional samples, the Drug Administration of Vietnam shall
follow the instructions provided in Clause 5 of this Article.
3. If the sample was collected by a quality inspection authority from manufacturers, importers and
preservation service providers, or the sample's quality violation is identified to be caused by the
production process, or samples of the same pharmaceutical product batch are collected from 02
wholesalers, the Ministry of Health (Drug Administration of Vietnam) shall identify the violation’s
4. seriousness and draw the conclusion on recalling the violating pharmaceutical product as specified in
Appendix II issued together with this Circular, and issue the pharmaceutical product recall decision as
specified in Clause 3, Article 12 of this Circular. The recall's scope and time limit are specified in
Clause 3 Article 63 of the Law on Pharmacy.
4. Requirements for collecting additional samples for quality testing as prescribed in Clauses 1 and 2
of this Article:
The pharmaceutical product quality inspection authority shall determine a sampling method according
to the report on distribution by manufacturers and importers; pharmaceutical product samples shall be
collected from wholesalers and retailers in the following order of priority a, b, c, d and dd:
a) From wholesalers within different provinces and cities, including the wholesalers that provided
pharmaceutical products to the facilities from which samples were collected;
b) From wholesalers within different provinces and cities;
c) From wholesalers within the same provinces and cities;
d) From wholesalers and retailers;
dd) From retailers.
e) Samples shall be only collected adopting the method dd if manufacturers and importers prove that
pharmaceutical products are no longer stored at wholesalers. Additional samples of recalled
pharmaceutical products shall not be collected.
5. Handling of results of testing of additional samples.
a) If the additional samples meet quality standard, Ministry of Health (Drug Administration of Vietnam)
shall issue a document identifying the violation’s seriousness and facility responsible for the violation
and direct provincial Departments of Health to handle pharmaceutical products of the first retailers
from which samples were collected in the case specified in Clause 1 of this Article or wholesalers and
recalled pharmaceutical products within provinces and cities in the case specified in Clause 2 of this
Article.
The recall's scope and time limit are specified in Clause 3 Article 63 of the Law on Pharmacy;
b) If at least 01 (one) additional sample collected at retailers fails to meet the quality standards, except
for the case specified in Point a of this Clause, the Ministry of Health (Drug Administration) shall
identify the violation’s seriousness and facility responsible for the violation, direct the provincial
Department of Health to handle pharmaceutical products at retailers from which the samples were
collected and issue a warning about the pharmaceutical product storage conditions and quality.
c) If at least 01 (one) additional sample collected at wholesalers or all additional samples are collected
at retailers as prescribed in Point dd Clause 4 of this Article fail to meet the quality standards, the
Ministry of Health (Drug Administration) shall identify the violation’s seriousness and draw the
conclusion on recalling the violating pharmaceutical product as specified in Appendix II issued
together with this Circular, and issue the pharmaceutical product recall decision as specified in Clause
3 Article 12 of this Circular.”
12. Point d is added to Clause 2 of Article 15 as follows:
“d) The pharmaceutical product is counterfeit, illegally imported, of unknown origins, expired,
composed of banned substances, produced from raw materials that fail to meet quality standards or
required to be recalled as prescribed in the Decree on administrative penalties for violations against
regulations on health or its stored samples are unexpired.
13. Clause 6 of Article 15 is amended as follows:
“6. Pharmaceutical product destruction:
a) The head of the facility that has pharmaceutical products to be destroyed shall decide to form the
pharmaceutical product destruction council responsible for organizing the destruction, deciding
destruction methods and supervising the destruction. The council shall have at least 03 persons, with
one representative having professional responsibility;
b) Pharmaceutical product destruction must be safe for both humans and animals, does not pollute the
environment in accordance with regulations of law on environmental protection.
The facility that has pharmaceutical products to be destroyed shall take total responsibility for the
destruction and submit a pharmaceutical product destruction report enclosed with a destruction record
to the local Department of Health in accordance with the Form No. 06 in the Appendix III hereof.
5. c) Vaccine destruction:
- At least 07 days before the vaccine destruction, the facility destroying vaccines must send a
destruction plan to the local Department of Health, including information about the name, number,
concentration or content of each vaccine to be destroyed, reasons for destruction, date and place of
destruction and destruction method. The Department of Health shall supervise the vaccine
destruction.
- Vaccine destruction procedures and vaccine destruction shall comply with regulations of the Joint
Circular No. 58/2015/TTLT-BYT-BTNMT dated December 31 of the Minister of Health and Minister of
Natural Resources and Environment and Circular No. 36/2015/TT-BTNMT dated June 30, 2015 of the
Minister of Natural Resources and Environment.- Within 07 days from the end of the vaccine
destruction, the facility shall submit a vaccine destruction report enclosed with a destruction record to
the local Department of Health and Drug Administration of Vietnam.
The destruction record shall be made using the Form No. 06 in the Appendix III hereof.
d) The destruction of controlled pharmaceutical products shall comply with Article 48 of the Decree No.
54/2017/ND-CP.”
14. Point b Clause 1 of Article 18 is amended and Point e is added thereto as follows:
“b) Take charge and cooperate with the National Institute of Drug Quality Control, the Institute of Drug
Quality Control of Ho Chi Minh City, the National Institute for Control of Vaccines and Biologicals in
formulating plans to collect pharmaceutical product samples for quality inspections carried out at
facilities in charge of production, preparation, import, export, storage, wholesaling, retail and use of
pharmaceutical products nationwide, and present those plans to the Ministry of Health for
consideration and approval, and allocation of budget for plan implementation within the Ministry’s
competence.
Collect pharmaceutical product samples for quality inspection according to the approved plans and
update the Ministry of Health’s pharmaceutical quality inspection database with information on
collected pharmaceutical product/pharmaceutical starting material samples (including names of
pharmaceutical products/pharmaceutical starting materials, concentration, content, dosage form,
batch number, expiry date, number of certificate of registration or import license, manufacturer,
importer, sample collector) and the pharmaceutical product/pharmaceutical starting material quality
inspection results;”
“e) Take charge and cooperate with relevant competent authorities in translating, publishing and
updating WHO guidelines for pharmaceutical product destruction on the website of the Drug
Administration of Vietnam for reference purpose.”
15. Point b Clause 2 of Article 18 is amended as follows:
“b) Formulate plans to collect pharmaceutical product/pharmaceutical starting material samples for
quality inspections carried out at facilities in charge of production, preparation, import, export, storage,
wholesaling, retail and use of pharmaceutical products within provinces and cities and present those
plans to the provincial People’s Committees for consideration, approval and allocation of budget for
plan implementation within the Committees’ competence;”.
16. Point a Clause 13 of Article 18 is amended as follows:
“a) Central pharmaceutical product testing facilities (National Institute of Drug Quality Control, Institute
of Drug Quality Control of Ho Chi Minh City, National Institute for Control of Vaccines and Biologicals):
- Analyze and test samples to identify the quality of manufactured, marketed and used pharmaceutical
products/pharmaceutical starting materials; report the test results to the Ministry of Health (Drug
Administration of Vietnam) and the local Department of Health;
- Research, compile and publish the list of reference materials (including those of impurities) on
websites of the institutes and the Drug Administration of Vietnam for analyses and tests on
manufactured, imported, marketed and used in Vietnam;
- The National Institute of Drug Quality Control and the Institute of Drug Quality Control Ho Chi Minh
City have the responsibility to provide pharmaceutical product testing centers in assigned provinces
with physical and electronic copies of pharmaceutical product/pharmaceutical starting material quality
standards;
- The National Institute for Control of Vaccines and Biologicals, on an annual basis, review and
evaluate vaccine/biological quality trends and present the evaluation to the Drug Administration of
Vietnam, which will review and present it to the Ministry of Health for promulgation of guidelines for lot
release testing of vaccines and biologicals which are seria containing antibodies and derivatives of
human blood and plasma; the scope of work shall include the following elements:
6. + A lot release testing policy and policy on reduced testing or exemption from testing of vaccines and
biologicals that have been assessed and issued with the Batch Release Certificate by the Stringent
Regulatory Authorities.
+ Criteria to be tested upon testing for issuance of the quality certificate, time limit for issuance of the
certificate of quality to each vaccine/biological; and
+ Specimen of the lot summary protocols for each type of vaccine/biological.
Update information about issuance of quality certificates for vaccines and biologicals which are seria
containing antibodies and derivatives of human blood and plasma on websites of the institutes and the
Drug Administration of Vietnam.”
17. Point a Clause 5 of Article 18 is added as follows:
Recover sampling fees returned by trading establishments and costs of substandard pharmaceutical
product/pharmaceutical starting material sample testing in accordance with laws”.
18. Point b Clause 5 of Article 18 is added as follows:
“- Recover sampling fees returned by trading establishments and costs of substandard pharmaceutical
product/pharmaceutical starting material sample testing in accordance with laws.”
19. Clause 8 Section I in the Appendix I is amended as follows:
“8. Sampling of herbal materials
1. If herbal materials or partially processed herbal materials, including animals and plants (dried
medicinal plants and parts thereof) and minerals are regarded as homogeneous, samples thereof shall
be taken as prescribed in Section I Clause 9 “r plan” of this Appendix.
2. The sampling for herbal material quality control by state-owned pharmaceutical product quality
inspection authorities shall comply with WHO’s Quality control methods for herbal materials 2011. If an
herbal material batch shows any sign of non-uniformity, the sampling shall be carried out as
prescribed in Point 1 of this Clause.”
20. An additional Form No. 09 in the Appendix III Lot summary protocols is enclosed with this Circular.
Article 2. Effect
This Circular comes into force from March 16, 2020.
Article 3. Responsibility for implementation
The Director General of the Drug Administration of Vietnam, Chief of the Ministry Office, Chief
Ministerial Inspector, heads of units affiliated to the Ministry of Health, provincial Departments of
Health, pharmacy business establishments, other related authorities, organizations and individuals
have the responsibility to implement this Circular.
Difficulties that arise during the implementation of this Circular should be reported to the Ministry of
Health (Drug Administration of Vietnam) for consideration and solution./.
PP. THE MINISTER
THE DEPUTY MINISTER
Truong Quoc Cuong
APPENDIX I
GUIDELINES FOR SAMPLING OF PHARMACEUTICAL PRODUCTS AND PHARMACEUTICAL
STARTING MATERIALS FOR QUALITY VERIFICATION
(Enclosed with the Circular No. 11/2018/TT-BYT dated May 04, 2018 of the Minister of Health)
I. Sampling procedures and sampling operations
1. Sampling tools
All sampling tools and implements should be made of inert and clean materials, which should be
suitable for each sample type, ensure no effect on sample quality, prevent impurities that cause
7. contamination of samples or cross-contamination and ensure safety of sampler (see Section III).
2. Quantity of samples taken
2.1. The quantity of sample taken for analytical and retention purposes should be calculated according
to inspection requirements, pharmaceutical product quality standards, applied pharmaceutical starting
materials and testing methods but should be sufficient to perform tests to obtain accurate and reliable
results.
2.2. Two samples are usually taken from each consignment (one for analytical purpose and one for
retention purpose). Where necessary, the number of analytical samples and retention samples may be
more than two to be sufficient for testing and retention at relevant organizations.
3. Sampling operations
3.1. Sampling principles:
- Depending on the inspection purpose and each type of product, the sampler should decide to adopt
an appropriate sampling method.
- The sampling process should be appropriately supervised and documented. Any signs of non-
uniformity or deterioration of pharmaceutical products and containers should be documented.
- The sampling procedure should be such that non-uniformity of pharmaceutical products in each
sampling unit and entire consignment can be detected. Signs of non-uniformity include differences in
shape, size or colour of particles in crystalline, granular or powdered solid substances; moist crusts on
hygroscopic substances; deposits of solid pharmaceutical product in liquid or semi-liquid products; and
stratification of liquid products.
- Pooling of the samples from the different portions should be avoided, because this can mask
contamination, low potency or other quality problems. Separate samples should be formed from these
portions and containers.
- For finished pharmaceutical products, the sampling procedure should take account of the official and
non-official tests required for the individual dosage form (e.g. tablets or parenteral preparations). Non-
official tests could include testing for adulteration and counterfeiting.
- It is not recommended to mix the pharmaceutical product removed from a container directly with the
one left in that container.
3.2. Sampling procedures
- Carry out physical inspection of the consignment: segregate containers by each type of product and
consignment, segregate containers that show any signs of deterioration and do not ensure cleanliness
for inspection or sampling. Reject unlabelled sampling units.
- Take sampling units from the consignment of products, open containers to take original samples and
reseal the containers from which the samples were taken. Ensure that the quantity of materials in the
original samples is sufficient to prepare next samples.
- Gently mix original samples into separate samples of each sampling unit.
- Gently mix separate samples into a common sample.
- Form final samples: take equal fractions from the common sample to form final samples, including
analytical samples and retention samples.
3.3. Analytical samples and retention samples should be placed in sealed and labeled containers. A
sample container should be labeled with name of the pharmaceutical product, name of the
manufacturer, lot number, expiry date, number of containers from which samples were taken, place of
sampling, number of samples taken (if samples taken are pharmaceutical starting materials for
manufacture of narcotic drugs and psychotropic drugs, precursors used as pharmaceutical products
and starting materials for manufacture of radiopharmaceuticals), date of sampling and storage
conditions in accordance with the sampling record.
3.4. After the sampling is done, analytical samples and retention samples should be separately sealed
to ensure their safety during transportation. The seal should clearly specify the date of sampling and
bear at least signatures of the sampler and the representative of the establishment where the sample
was taken.
Where necessary, the remainder of the sampling interval should be also sealed to prevent tampering
of pharmaceutical products and pharmaceutical starting materials.
3.5. Make a sampling record: The sampling record should contain the batch number, date and place of
8. sampling, storage conditions, notes on possible abnormalities, any other relevant observations and at
least the name and signature of the sampler and representative of the establishment where the
sample was taken.
In the cases where the quality inspectorate takes samples, the record is required to bear the signature
of the inspectorate's chief.
In case the representative of the establishment where the sample was taken fails to sign the record,
the record should bear the signatures of the sampler and witness.
The record should be made into three copies, which are kept at the establishment where the sample
was taken, testing authority and pharmaceutical product quality inspecting authority respectively.
4. Sampling of pharmaceutical starting materials
4.1. In case the material is placed in one container only:
a) Take samples of the solid material: take original samples in different locations of the container (at
the top, the bottom or in the middle). If the original samples do not show any visual signs, gently mix
them into separate samples.
b) Take samples of the liquid or semi-solid material: if the material is non-homogeneous, gently mix it
before sampling. For example, a stratified liquid may be stirred or a solid deposit in a liquid may be
dissolved by gentle warming and stirring.
4.2. In case the consignment of material is placed in multiple containers:
Depending on the sampling purpose, uniformity and quality of the consignment of material, adopt an
appropriate sampling method according to Section I Clause 9 of this Appendix.
5. Sampling of unpackaged semi-finished products
These products include powdered pharmaceutical products, solutions, syrups, ointments, granules,
tablets, injections, etc. that are transported in large containers to the packaging facility. Samples shall
be taken from each consignment as follows:
1. If the consignment of products is contained in 1 - 2 containers, open the two containers. If the
consignment of products is contained in more than 3 containers, open the three containers. Take at
least 3 original samples in different locations of each container.
2. Mix original samples into a common sample, and then form final samples, including analytical and
retention samples.
6. Sampling of packaging materials
Samples of packaging materials shall be taken as prescribed in Section 1 Clause 9 of this Appendix.
7. Sampling of finished pharmaceutical products
7.1. Take samples of finished pharmaceutical products to inspect or control quality:
a) Samples should be taken at random and at different locations of the consignment.
b) According to the pharmaceutical product quality standard, the quantity of pharmaceutical product
taken should be sufficient to allow for testing and retention. If information is insufficient for accurate
calculation of the quantity of pharmaceutical product to be taken, consider the minimum quantity of
finished pharmaceutical products provided in Section V of this Appendix.
c) Sampling procedures should be completed according to the guidelines provided in Section II of this
Appendix.
7.2. Take samples to carry out visual inspection upon import of pharmaceutical products: the quantity
of sample taken to carry out visual inspection is specified in Section IV of this Appendix.
8. Sampling of herbal materials
1. If herbal materials or partially processed herbal materials, including animals and plants (dried
medicinal plants and parts thereof) and minerals are regarded as homogeneous, samples thereof shall
be taken as prescribed in Section I Clause 9 “r plan” of this Appendix.
2. The sampling for herbal material quality control by state-owned pharmaceutical product quality
inspection authorities shall comply with WHO’s Quality control methods for herbal materials 2011. If an
herbal material batch shows any sign of non-uniformity, the sampling shall be carried out as
prescribed in Point 1 of this Clause.
9. Sampling plans for pharmaceutical starting materials and packaging materials
9. 9.1. Before sampling, the sampler should check the integrity and deterioration of the container, and
uniformity of products in each sampling unit.
9.2. Sampling should be carried out according to one of the three sampling plans provided in Table 1
below.
Table 1: Values of n, p or r for the N sampling units
Value of n, p, r
Values of N
n plan p plan r plan
2 Up to 3 Up to 25 Up to 2
3 4 - 6 25 - 56 3 - 4
4 7 - 13 57 - 100 5 - 7
5 14 - 20 101 - 156 8 - 11
6 21 - 30 157 - 225 12 - 16
7 31 - 42 17 - 22
8 43 - 56 23 - 28
9 57 - 72 29 - 36
10 73 - 90 37 - 44
a) The n plan
The “n plan” should be used only when the material to be sampled is considered uniform and is
supplied from a recognized source. Samples can be withdrawn from any part of the container (usually
from the top layer). The “n plan” is based on the formula n = 1 + N , where N is the number of
sampling units in the consignment. The value of n is obtained by simple rounding. Original samples
are taken from n sampling units selected at random and these are subsequently placed in separate
sample containers. If the results are concordant, the original samples are combined into a final,
common sample from which an analytical sample is prepared, the remainder being kept as a retention
sample.
b) The p plan
The “p plan” may be used when the material is uniform, is received from a recognized source and the
main purpose is to test for identity. The p plan is based on the formula p = 0.4 N , where N is the
number of sampling units. The figures for p are obtained by rounding up to the next highest integer.
Original samples are taken from each of the N sampling units of the consignment and placed in
separate sample containers. These original samples are visually inspected and tested for identity. If
the results are concordant, p common samples are formed by appropriate pooling of the original
samples (if necessary).
c) The r plan
The “r plan” may be used when the material is suspected to be non-uniform and/or is received from a
source that is not well known, herbal medicinal products or partially processed herbal medicinal
products. This plan is based on the formula r = 1.5 N , where N is the number of sampling units. The
figures for r are obtained by rounding up to the next highest integer.
Original samples are taken from each of the N sampling units of the consignment and placed in
separate sample containers. These original samples are visually inspected and tested for identity. If
the results are concordant, r samples are randomly selected and individually subjected to testing. If
these results are concordant, the r samples are combined for the retention sample.
9.3. The abovementioned sampling plans are not recommended for sampling of starting materials for
identification tests. The GMP-WHO rules shall apply instead.
II. Sampling steps
1. Bulk liquid products
The steps to be considered when sampling bulk liquid products are as follows:
- Read and understand the precautions to be observed for the safe handling of the material.
10. - Gather together the required sampling equipment (sampling tube or weighted sampling can, sample
bottles and labels) and check that all the required items are clean.
- Locate the batch.
- Examine the container(s) for signs of contamination of the batch. Record any faults.
- Investigate and clarify the sources of and reasons for any faults before proceeding. Record any
faults.
- Investigate and clarify the sources of and reasons for any faults before proceeding.
- Choose a liquid-sampling tube of size and orifice suitable for the viscosity of the liquid being
sampled.
- Sample the liquid, suspension or emulsion (well stirred, if appropriate) by slowly pushing the open
sampling tube vertically down- wards through the liquid so that material is collected from each layer.
- Seal the tube, withdraw it from the bulk liquid, and allow liquid adhering to the outside of the tube to
drain. Transfer all the contents of the tube to a clean, labelled sample bottle.
- Repeat steps 8 and 9 until sufficient samples for analytical and retention purposes have been
obtained.
- Seal the sample bottle.
- Reseal the container from which the samples were withdrawn and label as “sampled”.
- Wipe clean the sampling spear if required, observing the safety precautions.
- Repeat steps 12–18 for each chosen container.
- Clean the sampling spear using the recommended cleaning procedure.
- Deliver the analytical samples to the laboratory and the reserve samples to the retention sample
store. Report any aspects of the sampling that should be brought to the attention of the analyst or the
inspector.
- Check supplier certificate versus the specifications, if applicable.
2. Powdered starting material
The steps to be considered in sampling a powdered starting material are as follows:
- Read and understand the precautions to be observed for the safe handling of the material.
- Gather together the required sampling equipment (sampling spear, sample bottles and labels) and
check that all items are clean.
- Locate the consignment and count the number of containers.
- Examine all the containers for obvious differences and signs of damage. Record any faults.
- Examine all the labels for obvious differences and signs of changes, including obliterations and
mislabelling. Record any faults.
- Segregate any damaged containers and those with suspected spoiled contents for separate
examination. These should then be referred or rejected and dealt with accordingly.
- Segregate any containers with different batch numbers and treat these separately.
- Number the remaining containers.
- Choose the appropriate sampling plan (n, p or r).
- Choose the containers to be sampled in accordance with the requirements of the chosen plan (by the
use of random number tables, by drawing lots or by the use of a random number generator if
applicable).
- Open the containers one at a time and inspect the contents. Record any differences.
- Choose a suitable, clean sampling spear and plunge this (gates closed) into the powder so that the
point of the spear reaches the bottom of the container.
- Open the gates to allow the powder to enter the spear cavities, then reclose them.
- Withdraw the spear from the container and transfer the spear contents to a labelled sample bottle.
- Repeat steps 12–14 until sufficient material has been collected for analytical and retention
11. requirements.
- Seal the sample bottle.
- Reseal the container from which the samples were withdrawn and label as “sampled”.
- Wipe clean the sampling spear if required, observing the safety precautions, before sampling the
other chosen containers.
- Repeat steps 12–18 for each chosen container.
- Clean the sampling spear using the recommended cleaning procedure.
- Deliver the analytical samples to the laboratory and the reserve samples to the retention sample
store. Report any aspects of the sampling that should be brought to the attention of the analyst or the
inspector.
- Check supplier certificate versus the specifications, if applicable.
3. Packaging materials
The steps to be considered in sampling packaging materials are as follows:
- Check the consignment against any associated documentation.
- Check transit containers for the following and report any deviations as necessary:
+ Correct identification;
+ integrity of seal, if appropriate; and
+ Absence of physical damage.
- Obtain the required sample from the required number of containers, bearing in mind the special
considerations for sampling packaging materials noted in Section I Clause 9 of this Appendix.
- Place the sample units into identified appropriate sample containers.
- Identify the consignment containers that have been sampled.
- Note any special situations found during the sampling process (e.g. rogue items or component
damage). Report any such observations as necessary.
- Remove all sampled material pallets or containers from the sampling area together with all
documentation.
- Check supplier certificate versus the specifications, if applicable.
4. Finished products
The following steps should be considered when sampling finished products:
- Determine the number of pallets per batch in the consignment.
- Calculate the number of pallets according to the number of sampling units to carry out visual
inspection:
+ Check condition of pallet and packaging for integrity of outer packaging material.
+ Check outside of goods on the pallets for general cleanliness.
+ Check that the overall labelling of the pallets matches the packing list.
+ Count, categorize and record the number of defects.
- Count the total number of transport packs on the number of pallets present and verify the total
against the packing list.
- From the number of pallets, work out the number of transport packs to be sampled:
+ Check condition of boxes for integrity of packaging material.
+ Check for cleanliness of boxes.
+ Check the labelling of the boxes for damage.
+ Check the boxes for overall damage.
+ Check the labels for spelling mistakes.
+ Check the labels for manufacturing and expiry dates.
12. + Count, categorize and record the number of defects.
- From the number of boxes selected, work out the number of unit packs to examined visually:
+ Check condition of the containers for integrity of packaging material.
+ Check for cleanliness of containers.
+ Check condition of containers for shape and colour.
+ Check the labelling of containers for damage.
+ Check the boxes for overall damage.
+ Check the labels for spelling mistakes.
+ Check the labels for manufacturing and expiry dates.
+ Count, categorize and record the number of defects.
- From the number of containers selected, determine the number of containers to be taken for physical
and chemical testing and for retention.
- Check the supplier certificate against the specifications, if applicable.
III. Types of sampling tools
Figure 1. Sampling scoops for solids
Figure 2. Typical dip tube
Figure 3. Typical sample thieves
(i) The plug thief (Figure 3.i) typically consists of a hollow tube with an inner rod that has a tip on the
end to allow the thief to enter the powder bed in the closed position. Pointed tips distort the powder
bed less than blunt-tipped probes. Some thieves have a locking device that allows the sample volume
to be set to the required sample weight, thereby reducing the weight variation in the sample
population.
13. (ii) A chamber thief (Figure 3.ii) generally consists of two concentric tubes; the inner tube is solid
except for the chambers in which the sample is collected. The outer tube is hollow with openings that
can be aligned with the chambers in the inner tube. A well-designed thief will have a sharp end to
minimize disruption to the powder bed.
Note: When it is inserted into a static powder blend a thief will distort the bed by carrying
pharmaceutical product from the upper layers of the blend to the lower layers. The magnitude of this
distortion can depend on whether the thief is inserted into the blend with a smooth, jerky or twisting
action. Therefore, staff should be trained in using the appropriate technique.
The angle at which the thief enters the powder bed can also influence sampling error. If a thief is
inserted into the powder bed vertically, it can extract samples of different particle size from those that
would be obtained using the same thief inserted at an acute angle. In addition, the orientation of a
chamber thief in relation to the powder bed (i.e. whether the chamber is at the top, the bottom or in the
middle of the thief) may also influence the sampling error.
Sampling error can also be affected by bed depth, as the static pressure of the bulk blend forces the
material into the sample chamber(s). This pressure is far greater at the bottom of a large container
than it is in the middle or at the top. It is quite possible that the same thief could extract samples of
different particle size from the top or bottom of a static powder blend.
Figure 4. Weighted container
For taking samples from large tanks and storage vessels, a container in a weighted carrier can be
used. The container is designed such that it can be opened at the required depth. Marks on the cord
used for lowering the container can be used to determine when the correct sampling depth has been
reached.
14. Figure 5. Typical sampling spears
A: Closed spear for sampling large grains such as maize
B: Closed spear for sampling small grains such as wheat
C: Open spear
D: Double-tube spear
Sampling spears generally have a maximum external diameter of about 12 mm, but can be up to 25
mm in diameter and should be 40–45 cm in length.
IV. Number of sampling units from batches of finished pharmaceutical products to be taken for
visual inspection (ISO 2859-1)
Lot size
Number of sampling units from batches/lots
Number of sampling units from batches of
finished pharmaceutical products to be taken
for visual inspection
2 to 8 2
9 - 15 3
16 - 25 5
26 - 50 8
51 - 90 13
91 - 150 20
151 - 280 32
281 - 500 50
501 - 1200 80
1201 - 3200 125
3201 - 10000 200
10001 - 35000 315
35001 - 150000 500
150001 - 500000 600
Over 500001 1250
V. Number samples taken for quality inspection
Number of samples of pharmaceutical products and pharmaceutical starting materials taken for quality
inspection (excluding samples taken for retention purpose):
No. Dosage form Type, specifications Quantity
1
Tablets, capsules, film
coated tablets
1 active ingredient 80 tablets/capsules
≥ 2 active ingredients 120 tablets/capsules
2 Solutions
≥ 100 ml 20 bottles (vials)
10 - 100 ml 30 bottles (vials)
5ml - 10ml 50 bottles (vials)
< 5ml 100 bottles (vials)
3
Granules, powders
Packaged in single-dose or multiple-
dose
~ 100 gram
Hard pills, soft pills
> 0.5 g/pill 120 pills
0.1 - 0.5 g/pill 200 pills
< 0,1 g/pill 500 pills
4 Medicinal liquor
≤ 650 ml 7 bottles
> 650 ml 5 bottles
15. 5
Intravenous fluids
≥ 250 ml 20 bottles
100 ml - 250 ml 25 bottles
< 100 ml 50 bottles
Syringes
1ml 150 syringes
≥ 2 ml 120 syringes
Distilled water for injection
2 ml 250 ampoules
5 ml 100 ampoules
10 ml 80 ampoules
6 Eye drops
≤ 2ml/100mg 100 vials (tubes)
> 2ml/100mg 80 vials (tubes)
7
Topical ointments, creams,
gels
≤ 100mg 30 vials (tubes)
> 100mg 40 vials (tubes)
8 Powders for injection
< 100 mg 150 vials
100 - 450 mg 120 vials
> 450 mg 100 vials
9 Massage oil
1 - 2 ml 30 vials
≥ 5 ml 20 vials
10 Medicinal extract Various forms ~100g
11 Herbal materials
Containing oil 250 g
Not containing oil 100 g
12 Oil Various forms 150 ml
13 Vaccines, biologicals Various forms
In accordance with the
manufacturer's regulations
14 Materials
Precious materials 20 g
Antibiotic materials 50 g
Materials for manufacture of narcotic
drugs and psychotropic drugs,
precursors
10g
Normal materials 100 g
Plastic beads 200 g
15 Infusion sets Various forms 30 sets
16 Hollow glass tubes
2 ml 500 tubes
≥ 5 ml 300 tubes
17
Bottles for intravenous
fluids
Various forms 10 bottles