Cim 20100601 jun_2010

Contents Zoom In Zoom Out For navigation instructions please click here Search Issue Next Page

SOLUTIONS FOR PREMISES AND CAMPUS
JUNE 2010 COMMUNICATION SYSTEMS WORLDWIDE

CELEBRATING
100 years PAGE 2

INSTALLATION PAGE 11

Putting optical
theory into practice
DESIGN PAGE 5

Connecting the
collocated facility
w w w.c ablingins t all.c o m

Contents Zoom In Zoom Out For navigation instructions please click here Search Issue Next Page

C Previous Page | Contents | Zoom in | Zoom out | Refer a Friend
A

Installation 7Maintenance
| Search Issue | Next Page
BMaGS
E
F

Why
Settlefor
Less ?

While other manufacturers want extra for birdie performance in a cable, here at Corning Cable Systems,
we thought we’d just make that par for the course. All LANscape® Solutions 50 micron multimode cables
contain ClearCurve® Multimode Fiber. That’s bend-insensitive multimode – so no matter what your
network faces, you’ve got signal integrity in the bag.

Learn more at offers.corning.com/1-CIM-CC
_______________________

© 2010 Corning Cable Systems LLC

A

BMaGS
E
F

A

BMaGS
E
F

JUNE 2010 | VOLUME 18 NO. 6

ABOUT THE COVER
The parent company of this magazine :: FEATURES
turns 100 years old, motivating our edi-
DESIGN
tor to take a then-and-now look at a few
items in telecom and other industries.
SEE EDITORIAL ON PAGE 2.
5 Optical solutions for the
collocation data center
Making the case for fiber and certain fiber
Group Publisher Susan Smith
(603) 891-9447; susans@pennwell.com
connection interfaces in high-density data center
Chief Editor Patrick McLaughlin environments. DAVID ECKELL
(603) 891-9222; patrick@pennwell.com
Senior Editor Matt Vincent
(603) 891-9262; mattv@pennwell.com
INSTALLATION
Marketing Manager Joni Montemagno
Art Director Kelli Mylchreest
Production Manager Mari Rodriguez 11 Optical fiber cabling and component
specification considerations
Senior Illustrator Dan Rodd
Development Manager Michelle Blake Put optical theory into practice for optimal netwok
Ad Traffic Manager Alison Boyer
performance. VALERIE MAGUIRE

EDITORIAL OFFICES TECHNOLOGY
PennWell Corporation,
Cabling Installation & Maintenance
98 Spit Brook Road LL-1
Nashua, NH 03062-5737
19 Codes, standards and technologies
driving green building development
Tel: (603) 891-0123, fax: (603) 891-9245
www.cablinginstall.com A jointly developed building code aims to increase
CORPORATE OFFICERS energy efficiency in facilities. PATRICK MCLAUGHLIN
Chairman Frank T. Lauinger
President and CEO Robert F. Biolchini
Chief Financial Officer Mark C. Wilmoth DATA CENTER
TECHNOLOGY GROUP
Senior Vice President & Publishing Director
23 EPA tackling energy efficiency
in storage equipment
Christine A. Shaw
Senior Vice President, Audience Development
Gloria Adams
Agency issues first draft of Energy Star specification
For subscription inquiries: one year after announcing the program.
Tel: (847) 559-7520; Fax: (847) 291-4816
e-mail: cim@omeda.com; PATRICK MCLAUGHLIN
web:www.cim-subscribe.com

CABLING INSTALLATION & MAINTENANCE © 2010 (ISSN 1073-3108), is
published 12 times a year, Aprilly, by PennWell Corporation, 1421 South Sheridan
:: DEPARTMENTS
Road, Tulsa, OK 74112; phone (918) 835-3161; fax (918) 831-9497; www.pennwell.
_ Periodicals postage paid at Tulsa, OK 74112 and other additional
com.
offices. Subscription rate in the USA: 1 yr. $88, 2 yr. $119, BG $161; Canada/
Mexico: 1 yr. $98, 2 yr. $132, BG $178; International via air: 1 yr. $120, 2 yr. $160,
BG $216; Digital: 1 yr. $60. If available, back issues can be purchased for $22 in
the U.S. and $32 elsewhere. All rights reserved. No material may be reprinted. Bulk
reprints can be ordered from The YGS Group (cim@theygsgroup.com).
2 Editorial
A century in the making
We make portions of our subscriber list available to carefully screened companies
that offer products and services that may be important for your work. If you do not
want to receive those offers and/or information via direct mail, please let us know
by contacting us at List Services Cabling Installation & Maintenance, 98 Spit Brook
Road LL-1, Nashua, NH 03062.
POSTMASTER: Send address changes to: Cabling Installation & Maintenance,
P.O. Box 3425, Northbrook, IL 60065-3280. Return undeliverable Canadian
addresses to: P.O. Box 122, Niagara Falls, ON, Canada L2E 6S4.
25 Editor’s Picks
Terminate RJ-45s with one squeeze
PRINTED IN THE USA.
GST No. 126813153
Publications Mail Agreement no. 1421727

www.cablinginstall.com Cabling Installation & Maintenance JUNE 2010 1

A

BMaGS
E
F

A

BMaGS
E F

:: EDITORIAL ::
on cablinginstall.com

A century in the making
Long-time readers of Cabling premises communications systems are
Installation & Maintenance may intricate and complex, to put it mildly.
DESIGN/INSTALL/TEST
remember that a few of our issues over The magazine that could not have Free reference guide to
cabling installation available
the years have fallen into the category been conceived in 1910 is, at least I like
of “commemorative anniversary.” to think, a worthwhile use of its read-
NETWORK CABLE
Established in 1993, ers’ time and an information source
Category 6A deployments
this magazine has taken that helps cabling-industry profession- in the Middle East
the look-back/look-ahead als gain intelligence about the trade.
approach to our 5-, 10-, The “Penn” in PennWell comes from NETWORK PROTOCOLS
and 15-year anniversary Pennsylvania, where the company Optical patch cord paves
issues. This month we’ve originated. The “Well” refers to oil the way to 100G
used our front cover not wells. Incorporated as the Petroleum
to recognize any particu- Publishing Company, my employer’s WIRELESS
lar milestone of the mag- deepest roots are in the oil and gas Multi-gig wireless
azine itself, but rather to acknowledge industries. As I write this column in specification published
the 100th birthday of PennWell, the May 2010 the BP oil spill continues to
DATA CENTER
company that owns this title. belch from the ocean floor, and also
International standard
Telephone deregulation, which continues to dominate headlines in
for data center facilities
took effect in the 1980s, was really every form of media, from newscasts to management
the watershed event that eventually newspapers and across the Web.
brought this publication to fruition. While retelling the state of commu- CABLING STANDARDS
When our parent company nications in 1910 earlier, I was tempted Standards reference
PennWell was born 100 years ago to include a sarcastic comment like, guide focuses on 568-C
there was no concept of an informa- “A lot can happen in 100 years.” But
tion source for building owners who in light of the current state of affairs CONNECTIVITY
were challenged to operate the grow- off the coast of Louisiana, it’s more Cat 6A plug assembles
ing and changing cabling systems appropriate to remind myself that a lot
in one minute
within their properties. As the image can happen in one second. This pub-
BLOG
on the left side of this month’s cover lication, its parent company, and I bet
FBI points to VoIP as
depicts, communications systems most of you reading this column have
element of online scheme
within buildings were, well, differ- learned that lesson, perhaps the hard
ent from what they are now. American way. In this brief space where I recog-
Visit cablinginstall.com for
Telephone and Telegraph was a mere nize a company’s 100th birthday, I’ll
these and other news stories.
25 years old then. Alexander Graham ask each of you to make every second
Bell’s patent on the telephone was still of every day of all your years, count.
in effect. PATRICK McLAUGHLIN
Today, as the image on the right Chief Editor
side of this month’s cover illustrates, patrick@pennwell.com

2 JUNE 2010 Cabling Installation & Maintenance www.cablinginstall.com

A

BMaGS
E F

A

BMaGS
E F

Which of these is a bigger threat to your security investment?

Products. Technology. Services. Delivered Globally.
The wrong cabling The right cabling
infrastructure can infrastructure is
hinder the performance critical to the
of even the most Blurred, unusable video over
successful operation Crystal clear video over
sophisticated video minimally compliant and useful life of a ipAssured IP-ClassSM 10+ cable
Category 5e cable
surveillance system. security system.
Factors that affect the performance of cabling infrastructure: Anixter ipAssuredSM is an infrastructure assurance program that matches
• The migration of a security • The need for Power over Ethernet the cabling infrastructure to the security equipment based on the technical,
system to IP Plus and beyond application and life-cycle requirements of the user.
• Minimally compliant • Installation practices Receive the best performance for the anticipated life of your security system
Category 5e cable • Environmental conditions by installing an ipAssured cabling infrastructure.
• Increasing bandwidth requirements • Quality of IP cable manufacturing

ADC’s TrueNet® Structured Cabling System is an end-to-end, integrated portfolio of high-performance copper and ﬁber cable, connectivity
and cable management solutions. Designed for data center, desktop and security applications, TrueNet solutions are backed by an industry
leading 20-year performance and a Zero Bit-Error Warranty that guarantees signal integrity and throughput.

Contact your local Anixter representative or visit anixter.com/ipassured10 to learn how Anixter ipAssured can protect your security investment.

1.800.ANIXTER anixter.com
© 2010 Anixter Inc.

Anixter is a leading global supplier of communications and security products, electrical and electronic wire and cable, fasteners and other small components. We help our customers specify solutions and make informed purchasing
decisions around technology, applications and relevant standards. Throughout the world, we provide innovative supply chain management services to reduce our customers’ total cost of production and implementation.

A

BMaGS
E F

A

BMaGS
E
F

____________________

A

BMaGS
E
F

A

BMaGS
E F

:: DESIGN ::

Optical solutions for the
collocation data center
computing and services like SaaS.
SaaS is an application delivery model
Making the case for fiber and certain fiber connection in which an instance of software is
interfaces in high-density data center environments. hosted by the collocation data center
and is used by the end user. The end
DAVID ECKELL, CORNING CABLE SYSTEMS user may be billed through subscrip-
tion or with a pay-as-you-go model.
We read about cloud computing, soft- for moves, adds and changes, while This may sound like an application ser-
ware as a service (SaaS) and man- adhering to industry standards. But vice provider (ASP) model, but there is
aged information technology (IT) ser- fi rst, let’s explore the drivers behind a key difference. SaaS is a multi-tenant
vices, among others, and fi nd that the the need for this type of facility. application that may be provisioned
term “collocation data center” is com- Today’s telecommunications infra- quickly with an automated front end.
mon among these services. But what structure is seeing the traffic growth ASP, on the other hand, requires man-
exactly is a collocation data center? that was expected
At its core, it is a common meet-point in the late 1990s and What major silicon vendors are saying
for businesses to interconnect with early 2000s. The Enterprise
telecommunications and network ser- Wall Street Journal Distance: 0.1–10km 10G <=40G

vice providers. The facility leases cage reported in March in Optical
Rack to rack
space to end users that populate the its Data Hosting and Distance: 1–100m 3.125G 10G 40G
space with their hardware and soft- Data Storage Report Tr
Board to board an
sit
ware, and manage it. Some facilities that analysts are very Distance: 50–100cm 3.125G 6.25G 10G ion 20G
provide less-expensive in-row collo- encouraged by the Electical
Chip to chip
cation services with lockable cabi- data hosting space Distance: 5–50cm 3.125G 6.25G 10G 15–20G
nets as well. The data center portion as well. They see 2004 2006 2008 2010 2012
of the facility provides value-added strong trends for data Source: Silicon vendors

outsourced services for businesses by hosting based on
supplying the hardware, software and current demand and future needs with According to silicon vendors,
customer-facing, front-end and back- networking equipment is trending
the IT support staff.
toward all-optic devices and the
Of major concern in these facilities end solutions. They cited the increased
transition will be largely complete
is the capability of the physical cable consumption of applications and video within a few years.
plant to handle future needs as well content with smartphones as a driver
as today’s requirements. The answer in this space. ual intervention to have an end user up
to this concern involves a complete and running. SaaS provides consider-
view of capabilities, capital expendi- SaaS and clouds mean business able cost savings for the end user and
tures, operation expenses, green initia- A few key drivers for outsourced data mitigates software service level agree-
tives and whether it provides flexibility hosting and storage involve cloud ments while enabling the collocation


A

BMaGS
E F

A

BMaGS
E F

:: DESIGN ::
Energy savings comparison of
data center manager to scale their as there is a comfort level due to skill
10G optical vs. 10G copper
%
offerings with less manual interaction. set or familiarity; however there are 90
Cloud computing is a model that several key reasons to migrate to an
delivers a variety of virtual services, optical physical plant. 85
much like SaaS, to a geographically First, the industry is clearly follow-
diverse group of end users. A cloud ing an optical path. As seen in the fig- 80
computing facility aggregates the ure titled “What major silicon vendors
common features found in a data cen- are saying,” manufacturers of telecom- 75
ter, such as power, cooling, physical munications networking equipment
plant and networking equipment, and are trending toward all-optical devices. 70
48 96 144 192 240 288
spreads those costs across hundreds Network equipment in the enterprise Number of 10G ports
and thousands of users throughout backbone operating at 10 Gigabit
This graph shows the energy-efficiency
the year. It provides the end user with Ethernet (GbE) became all-optical prior gains of using an optical system
massive scalability, access to high-end to 2004. In the period since, the opti- versus a copper system for 10-Gbit/sec
switching equipment, reliability, disas- cal trend has been increasing within transmission. At a density of 288 10-Gig
ports, fi ber offers an 86% efficiency gain
ter recovery and cost savings. the horizontal as data rates move from
over copper.
This is a good-news story for 1 to 10 GbE. As data rates increase
today’s data center collocation man- to 40 GbE and beyond, the landscape SFP+ transceiver consumes 0.5 watts
agers. Over the next few years, even becomes all-optical in the horizontal. of power. A dual-port 10G copper net-
if bandwidth use is conservative, There is no existing guidance from the work interface card (NIC) on a server
the demand for collocation data cen- Institute of Electrical and Electronics card weighs in at 24 watts with the
ter servers and storage will increase. Engineers (IEEE; www.ieee.org) optical SFP+ NIC averaging 9 watts.
However, in order to adequately meet for using 40/100 GbE unshielded or This allows network equipment man-
this demand curve, decisions regard- shielded cabling, and the trend is that ufacturers to provide optical switches
ing legacy and existing telecommu- it will not be included in the future. with three to six times the density of
nications infrastructure will need to This significantly impacts the TCO as current copper-based switches.
be addressed. Questions will surface a completely copper backbone would Added to the cost for the additional
regarding physical media, design con- need to be replaced entirely to sup- power is the need for appropriate cool-
siderations, latency, effects on capital port 40/100 GbE, while existing OM3 ing. According to the Environmental
expenditures and operation expendi- and OM4 fi ber-optic physical plants are Protection Agency (EPA), each unit of
tures incurred to support the physi- well-equipped to handle the migration. additional network power must be com-
cal plant over the long term. A solid While 40 Gbits/sec is available plemented with an equal unit of cool-
approach to designing and refreshing now for Infi niBand and will be avail- ing. For example, a 288 10G optical port
collocation data centers is necessary. able for Ethernet in 2011, some data has 86% enhanced energy efficiency
center managers see a migration to compared to 10G copper, resulting in
Media choices and TCO 40G far in the future, leading them to significant cooling savings over a cop-
Media choice is the fi rst consideration believe that a legacy copper solution per solution. According to researcher
in a new-build or refresh. This decision is warranted. However the total cost IDC (www.idc.com), some estimates
significantly impacts the total cost of of doing so throughout the lifespan of blame up to 60% of data center down-
ownership (TCO) of your data center the physical plant can be consider- time on heat-related issues. With ser-
and, ultimately, the margins that will able. The fi rst consideration is power vice level agreements (SLAs) and the
be generated. At times, it may seem consumption. A typical 10G copper potential for liquidated damages, heat-
like a sound course of action to con- PHY chip consumes six to eight watts related risks are simply not worth tak-
tinue with legacy copper media types of power, while the typical optical ing. As seen in the energy-savings


A

BMaGS
E F

A

BMaGS
E F

Fiber Cabling Made Easy

For small and mid-size installers
You are good at copper cabling. You can pull hundreds of drops a day, but
then your customer needs six fiber drops. What do you do?

Option 1. Buy expensive equipment, get certified, terminate, splice, polish, and test.
Option 2. Sub it out to your competitor who does fiber.
Option 3. Call ICC and we will build to your customer’s spec. No more field terminations!

LC, SC, ST, MTRJ, MPO, OM3, 10G…..you name it, we’ll do it. We beat TIA spec by
a mile (0.2dB Insertion Loss) and guarantee for 15 years. Best of all, we cost 50%
less than big brands, even less than on-site cabling.

Curious? Give us a call. You will be surprised how easy your life can be.

Join Elite, Earn Rewards and Perks 888.ASK.4ICC icc.com/cim csr@icc.com
icc.com/Elite

© Copyright 2010, ICC.

A

BMaGS
E F

A

BMaGS
E F

:: DESIGN ::

chart, as port count increases in the 300-pound maximum pulling tension, ready for the migration to 40 GbE par-
data center, there is significant energy depending on cable type. As a result, allel optics is a high-density fi ber-
savings in using a fiber-based solution more extensive testing is required to optic solution based on the TIA-942
over a UTP-based solution. certify copper media, which requires Telecommunications Infrastructure
The added benefit of reducing elaborate test equipment. However, Standard for Data Centers.
power and heating/ventilation/air- fi ber-optic testing in high-data-rate
conditioning (HVAC) consumption is environments is fast and cost-effec- Standards-based designs
a greener facility. Each kilowatt-hour tive, which helps to reduce the total This standard was designed with
consumed results in 1.6 pounds of cost of the project as well as the time speed and flexibility in mind. As the
CO2 emissions. By using fi ber optics, to install the physical plant. diagram shows, the design is based
data centers use less power at both At this point, the data center man- on a star topology using a main distri-
the networking level and cooling level.
Because they are using less power,
Star topology per TIA-942
they reduce their carbon footprint and Main distribution
Possible logical and physical architectures for “A” area (MDA)
their costs. As elements of cap-and-
trade or other governmental controls
Caged Caged
are initiated, those facilities with cop- colo EDA EDA EDA EDA HDA EDA EDA EDA EDA colo
per-based infrastructures may face
considerably more costs to offset their
Server HDA HDA HDA HDA ZDA HDA HDA HDA HDA
carbon footprints. farm
for hosted “A” “B”
services
Is copper the fragile medium? HDA HDA HDA HDA ZDA HDA HDA HDA HDA
An additional cost to consider when
installing the physical plant is the frag-
HDA HDA HDA HDA HDA HDA HDA HDA HDA
ile nature of Category 6 and 6A media. colo

As Category 6 and 6A cables have
advanced, they have become increas- This schematic shows a TIA-942 standard-based layout of a collocation data center.
ingly susceptible to noise and alien
crosstalk. While power-intensive digi- ager understands that fi ber-optic cable bution area (MDA) as its focal point. It
tal signal processing on the line card has significant operational and fi nan- is from here that the data center man-
assists in reducing deterministic noise, cial advantages over copper UTP/STP ager establishes a main crosscon-
the physical media must protect itself cable media at 10G. The question is nect that can easily manage moves,
against alien crosstalk through tight how to address the needs of the data adds and changes to facilitate grow-
twists and narrow tolerances for physi- center collocation facility. The data ing customer needs. The MDA feeds
cal separation of copper pairs. center manager must meet the same several areas within the facility and
It is a curious statement to say that reliability, performance and scalabil- can do so in different ways. The advan-
in some respects, the high-data-rate ity requirements that all data centers tage is that it helps to create an effi-
copper plant is more fragile than fi ber- demand, but they must provide these cient infrastructure. In a typical data
optic cable, but it is. For example, in requirements for numerous and some- center configuration, the MDA houses
order to maintain protection against times very different customers, all the core, aggregation and storage area
alien crosstalk, a Category 6A cable within the same facility and all at a network (SAN) switching. In order to
has a maximum pulling tension of 25 quick deployment velocity. The key to do this effectively, high-density fiber-
pounds. A typical fi ber-optic cable being able to provide a scalable solu- backbone cabling with preterminated
found in the horizontal has a 100- to tion that meets today’s needs and is MPO-style connectors should be used.


A

BMaGS
E F

A

BMaGS
E F

:: DESIGN ::

The benefits include reduced congestion in pathways and
a new world of
spaces, improved airflow and higher-density patching areas. unrivaled integrated solutions
In the diagram, the horizontal distribution area (HDA) at
the cage is performing the traditional function as a cross-
connect, housing the row’s switching equipment. From here
horizontal cabling terminates in the equipment distribution
area (EDA). However, the industry is moving to a top-of-rack
topology in preparation for parallel optics, so this pushes the
HDA to each rack.
This configuration is seen in the bottom row with edge
switches distributed to the top of each rack and terminated
with point-to-point fiber-optic uplinks back to the MDA. The
problem with this scenario is that the home runs back to
the MDA from each HDA do not take advantage of the den-
sity found in fiber-optic cabling. An additional option being
reviewed by TIA/EIA is the addition of a zone distribution
area (ZDA) between the MDA and HDA as seen in the mid-
dle rows. Here high-density backbone cabling extends from
the MDA to a ZDA and terminates with lower-density fiber-
optic cabling at the HDA in each rack, which helps further OCC is recognized as the
improve congestion in the spaces and pathways. gold standard in an industry
With the higher-density MPO-style connectors and that demands speed,
advances in bend-optimized fiber-optic technology, it is now technology, and durability.
possible to terminate more than 2,300 fibers in a 4U rack Our expanded product
offering includes fiber optic
space. It would take 127U to accommodate the same num-
and copper cabling, as well
ber of copper terminations. Providing this level of density as connectivity components
allows the data center manager to build the backbone in designed for commercial,
anticipation of customer needs, while leaving the short runs specialty, and harsh-environment
from the ZDAs to be installed quickly and cost effectively. applications. We have
As we have seen, the trend for data consumption is rising broade
broadened our scope, creating
a singl source of integrated
single
at a tremendous rate. The value of each rack space is increas-
solutio for our customers.
solutions
ing as businesses opt to outsource their hosting, storage and
application needs. In an effort to cut costs and improve densi-
ties within the facility, fiber-optic media is the clear choice. In
order to provide an infrastructure that will meet the demand
of today as well as the requirements of the future, it is critical
to employ an MPO-style preterminated fiber-optic solution
with bend-optimized fiber. This will significantly improve
patching density, minimize congestion in the pathways and 80
800-622-7711
spaces and provide the necessary migration path to parallel C
Canada 800-443-5262
optics that facilitates 40 GbE and beyond. To learn more,
vi occfiber.com or
visit
ca for a free catalog.
call
DAVID ECKELL is systems engineer with Corning Cable
Systems (www.corning.com/cablesystems).

www.cablinginstall.com

A

BMaGS
E F

A

BMaGS
E F

Fits 3x as much.
Go ahead, pull 3x as many cables as usual. MaxCell
can take it. And you’ll only need 1/3 the manpower to
get the job done. Plus you can overlay with MaxCell.
More cables per conduit, less labor, and the ability to
overlay. That’s the flexibility of MaxCell.

www.maxcell.us
__________________ 888.387.3828

More space. More productivity.

10 Y E A R S O F M A X I M I ZI N G P RO D U CTIV IT Y

A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

Optical fiber cabling and component
specification considerations
is typically easier to terminate and
install in the field than singlemode.
Put optical theory into practice for Additionally, it is always more cost-
optimal network performance. effective to transmit at 850 nm for mul-
timode applications and at 1310 nm for
BY VALERIE MAGUIRE, SIEMON singlemode applications. Finally, opto-
electronics that use multiple transmit
In last month’s issue I provided infor- requirements, as well as optical speci- lasers (e.g. 10GBase-LX4 uses four sep-
mation on fundamentals of optical light fications such as attenuation and band- arate laser sources per fiber) or other
sources and transmission. In this con- width are specified. It is important to multiplexing techniques cost signifi-
tinuation of that discussion, I will pres- keep in mind that these specifications cantly more than optoelectronics that
ent information on the means by which are for the “raw” optical fiber before it is transmit over one wavelength.
that optical theory is put into practice subjected to the cabling process. TIA
by professionals in the networking and and ISO use these optical fiber require-
cabling industries. ments to then specify requirements
Unlike balanced twisted-pair for OM1, OM2, OM3, OM4, OS1
media, optical fi ber cabling can be and OS2 optical fiber cables
considered application-dependent and cabling.
media. This means that consider- While media selection
ations such as distance, application may seem onerous, com-
and equipment cost play a role in the paring the throughput
media selection process. and distance needs in your
The Telecommunications Industry target environment against The XLR8 tool from Siemon combines
Association (TIA; www.tiaonline.org) performance parameters is a good splice activation and mechanical
way to initiate the selection process. crimping into a single step, enabling
and the International Organization for
quick and reliable field termination of
Standardization (ISO; www.iso.org), Although such comparisons may lead
LC and SC connectors.
through reference to specifications to the conclusion that singlemode fi ber
from the International Electrotechnical is the optimum medium under all sce- A good rule of thumb is to consider
Commission (IEC; www.iec.ch) and narios, there are tradeoffs to consider multimode fi ber to be the most cost-
the International Telecommunication related to the cost of optoelectronics effective choice for applications up to
Union (ITU-T; www.itu.int), recog- and application implementation. 550 meters in length.
nize six grades of multimode and sin- In particular, singlemode optoelec-
glemode optical fiber as shown in the tronics rely on much more powerful and Optical fiber cabling configurations
table on page 12. Physical dimensions precise light sources and can cost 2 Optical fi ber cabling is typically
related to the optical fiber, e.g. diam- to 4 times more than multimode opto- deployed in pairs; one fi ber is used
eter, non-circularity and mechanical electronics. Also, multimode media to transmit and the other is used to


A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

receive. Due to its extended distance common telecommunications rooms, area and the centralized crosscon-
support of applications compared to equipment rooms, telecommunications nect is 90 meters (295 feet). Centralized
balanced twisted-pair cabling, optical rooms, and telecommunications enclo- cabling requirements are specified in
fi ber cabling is the perfect media for sures within a commercial building. ANSI/TIA-568-C.0, ANSI/TIA-568-C.1,
use in customer-owned outside plant Backbone cabling must be configured and ISO/IEC 11801 Ed2.0.
(OSP), backbone cabling, and central- in a star topology and may contain one Optical fi ber cabling may also be
ized cabling applications. (main) or two (main and intermedi- used in the horizontal cabling infra-
Customer-owned OSP cabling is ate) levels of crossconnects. Backbone structure, although there are no provi-
deployed between buildings in a cam- cabling requirements are specified in sions allowing extended distance in
pus environment and includes the ter- ANSI/TIA-568-C.0, ANSI/TIA-568-C.1, the TIA and ISO standards.
minating connecting hardware at or and ISO/IEC 11801 Ed2.0. Horizontal cabling is deployed
within the structures. Interestingly, Centralized optical fiber cabling between the work area and the tele-
customer-owned OSP cabling is typi- may be deployed as an alternative to communications room or enclosure.
cally intended to have a useful life in the optical crossconnect to support Horizontal cabling includes the con-
excess of 30 years, so great care should centralized electronics deployment in nector and cords at the work area and
the optical fi ber patch
Supportable application distances by fiber type (meters)
panel. A full crosscon-
Application OM 1 OM2 OM3 OM4 OS1/ OS2
nect or interconnect may
Wavelength 850 1300 850 1300 850 1300 850 1300 1310 1550
be deployed along with
FDDI PMD 2,000 2,000 2,000 2,000
an optional multi-user
FDDI SMF-PMD 10,000
telecommunications out-
10/100Base-SX 300 300 300 300
let assembly (MUTOA) or
100Base-FX 2,000 2,000 2,000 2,000
consolidation point (CP)
1000Base-SX 275 550 800 800
for a total of four connec-
1000Base-LX 550 550 800 800 5,000
tors in the channel. The
10GBase-S 33 82 300 550
maximum horizontal cable
10GBase-LX4 300 300 300 300 10,000
length shall be 90 meters
10GBase-L 10,000
(295 feet) and the total
10GBase-LRM 220 220 220 220
length of work area cords,
10GBase-E 40,000
patch cords or jump-
40GBase-SR4 100 125
ers, and equipment cords
40GBase-LR4 10,000
shall be 10 meters (32
100GBase-SR10 100 125
100GBase-LR4 10,000 feet) for both optical fi ber

100GBase-ER4 30,000 and balanced twisted-
pair cabling channels.
be taken to specify robust cabling single-tenant buildings. Centralized Horizontal cabling requirements are
media. Requirements pertaining to optical fi ber cabling supports direct specified in ANSI/TIA-568-C.0, ANSI/
customer-owned outside plant cabling connections from the work area to the TIA-568-C.1, and ISO/IEC 11801 Ed2.0.
and pathways can be found in ANSI/ centralized crossconnect via a pull-
TIA-758-A and BS EN 50174-3. through cable and the use of an inter- Optical fiber cable
Backbone cabling is deployed connect or splice in the telecommuni- The optical fi ber that enables light
between entrance facilities, access- cations room or enclosure. Note that transmission is actually an assembly
provider spaces, service-provider the maximum allowed distance of the of three subcomponents: the core, the
spaces, common equipment rooms, pull-through cable between the work cladding, and the coating. The core is


A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

made of glass (or, more accurately, sil- are then encircled with aramid yarns aluminum, interlocking steel armor, or
ica) and is the medium through which for strength, and then enclosed by an dual jackets may be applied for addi-
the light propagates. The core may overall flame-retardant thermoplastic tional protection against crushing and
have an overall diameter of 9 μm for jacket to form a fi nished optical fi ber rodent damage. Supported fi ber counts
singlemode or 50 μm or 62.5 μm for cable. For indoor cables with higher are typically between 12 and 144.
multimode transmission. Surrounding than 12-fi ber counts, groups of jack- Indoor/outdoor optical fi ber cables
the glass is a second layer of glass eted optical fi ber cables (typically 6- or offer the ultraviolet and water resis-
with a vastly different index of refrac- 12-fi ber count) are bundled together tance benefits of outdoor optical fi ber
tion that focuses and contains the light with a central strength member (for cables combined with a fi re-retar-
by reflecting it back into the core. This support and to maintain cable geom- dant jacket that allows the cable to be
second layer is called the cladding etry) and are enclosed by an overall deployed inside the building entrance
and, regardless of the glass core con- flame-retardant thermoplastic jacket. facility beyond the maximum 15.2-
struction, has an overall diameter of Supported fi ber counts are typically meter (50-foot) distance that is speci-
125 μm. Combining the core and clad- between 2 and 144.
ding diameters is the source of optical Outdoor (also
fi ber descriptors, such as 50/125 μm or known as outside
62.5/125 μm, that are applied to opti- plant or OSP) optical
cal fi bers commonly used for telecom- fi ber cables are used
munications applications. The purpose outside of the build-
of the outermost layer, called the coating and are suitable
ing, is to add strength and build up the for lashed aerial, duct,
outer diameter to a manageable 250- and underground con-
μm diameter (about three times the duit applications. To
diameter of a human hair). The coat- protect the optical
Several of the optical interconnection technologies
ing is not glass, but rather a protec- fi ber core from water described in this article are shown here. Clockwise from
tive polymer such as urethane acrylate, and freezing, up to 12 upper left are MTP/MPO-style trunking cable assemblies,
that may be optionally colored for iden- 250-μm optical fi ber duplex LC-connected optical fi ber cables, plug-and-play
array modules (one with MPO/MTP-style connectors
tification purposes. cores are enclosed in
showing and the other with LC connectors showing),
Cabling optical fi bers makes them a loose buffer tube and a pass-through adapter plate.
easier to handle, facilitates connec- that is fi lled with
tor termination, provides protection, water-blocking gel. For up to 12-fi ber fied for OSP cables. Note that there is
and increases strength and durability. applications, the gel-fi lled loose tube no length limitation in countries out-
The cabling process differs depend- is encircled with water-blocking tapes side of the United States that do not
ing upon whether the optical fi bers are and aramid yarns and enclosed within specify riser- or plenum-rated cabling.
intended for use in indoor, outdoor, or an overall ultraviolet and water-resis- The advantage of using indoor/outdoor
indoor/outdoor environments. tant black polyolefi n jacket. For out- optical fi bers cables in this scenario is
Indoor optical fi ber cables are suit- door cables with higher than 12-fi ber that the number of transition splices
able for inside (including riser and ple- counts, groups of loose buffer tubes and hardware connections is reduced.
num) building applications. To facili- (typically 6- or 12-fi ber count) are bun- Indoor/outdoor optical fi ber cables are
tate connector terminations, a 900μm dled together with a central strength similar in construction to outdoor opti-
plastic buffer is applied over the opti- member and water-blocking tapes and cal fi ber cables except that the 250-μm
cal fi ber core, cladding, and coating aramid yarns and then enclosed within optical fi ber cores may be either tight
subassembly to create a tight buff- an overall ultraviolet and water-resis- buffered or enclosed within loose buf-
ered fi ber. Up to 12 tight buffered fi bers tant black polyolefi n jacket. Corrugated fer tubes. Loose tube indoor/outdoor


A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

optical fi ber cables have a smaller alignment sleeve. These components the reason why different optical fi ber
overall diameter than tight buffered work in tandem to retain and prop- types, including 62.5-μm and 50-μm
indoor/outdoor optical fi ber cables, erly align the optical fibers in the plug- multimode fi ber, should never be
however tight buffered indoor/outdoor adapter-plug configuration. The inter- mixed in the same link or channel.
cables are typically more convenient to nal connector ferrule is fabricated Optical fi ber breakout kits are used
using a high-preci- to facilitate termination of loose-tube
sion manufacturing optical fi bers used in indoor/out-
Centralized optical fiber cabling using process to ensure door and outdoor applications. Once
an interconnection
that the optical fiber the water-blocking gel is thoroughly
Telecommunications
room (TR) is properly seated removed from the optical fi bers, the
Work area (WA) and its position is breakout kit allows furcation tubes
Horizontal cable
90 m (295 ft. max) tightly controlled. (typically 1.2mm to 3.0mm in diam-
Work area
equipment The high tolerances eter) to be installed over the 250-μm
cord of the alignment optical fi bers, increasing the diameter
Work area outlet sleeve ensure that and forming a short “jacket” so that
Equipment the optical fibers the optical fi bers may be terminated
room
held in place by the to the desired optical fi ber connector.
ferrule are aligned Selection of the correct furcation tube
as perfectly as pos- ensures compatibility with all optical
Equipment cord connected to sible. Although fi ber connectors.
centralized equipment
more expensive, Users can choose from many optical
ceramic alignment fi ber connector options.
Shown here is a typical schematic for centralized optical
fi ber cabling using an interconnection; the centralized sleeves maintain Traditional optical fiber connec-
system supports direct connections from the work area to slightly tighter tol- tors are represented by the SC and
the centralized crossconnect via a pull-through cable and erances than metal ST connector styles. These two types
the interconnect.
or plastic alignment of optical fiber connectors were rec-
terminate because they do not contain sleeves, are not as susceptible to per- ognized when optical fiber cabling
water-blocking gel or require the use of formance variations due to temperature was described in the first published
breakout kits (described later). fluctuations, and may be specified for TIA and ISO/IEC telecommunica-
extremely low-loss applications. tions cabling standards. The ST con-
Optical fiber interconnections Accurate plug-adapter-plug align- nector features a round metal coupling
Unlike the plug-and-jack combina- ment minimizes light energy lost at the ring that twists and latches onto the
tion that makes up a mated balanced optical fi ber interconnection and main- adapter and is only available as a sim-
twisted-pair connection, an intercon- taining precision tolerances becomes plex assembly (two assemblies are
nection is used to mate two tight-buff- especially critical as the optical fi ber required per link or channel). SC con-
ered optical fibers. An optical fiber diameter decreases. For example, if nectors feature a quick push-pull latch-
interconnection typically consists of two 62.5-μm optical fi bers are off-cen- ing mechanism and have an advantage
two plugs (connectors) that are aligned ter by 4 μm in opposite directions, then in that they may be used in conjunc-
in a nose-to-nose orientation and held 13% of the light energy escapes or is tion with a duplex clip that more eas-
in place with an adapter (also called lost at the interconnection point. This ily supports the interconnection of the
a coupler or bulkhead). The perfor- same misalignment in a 9-μm single- two optical fibers in a link or channel.
mance of the optical fiber interconnec- mode fi ber would result in almost a SC optical fiber connectors are gener-
tion is highly reliant upon the connec- total loss of light energy. The criti- ally recommended over ST optical fiber
tor’s internal ferrule and the adapter’s cal nature of the core alignment is connectors for use in new installations


A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

Optical fiber cross-section The most common method. The main difference between
SFF interface is the the MT-RJ and LC optical connector is
Coating
LC connector, with related to the performance of the inter-
the MT-RJ having nal ferrule. The LC’s internal ferrule

Core
some limited legacy maintains sufficiently tight tolerances
Diameter market presence. to fully support both singlemode and
Core 9μm, 50μm, or 62.5μm
Cladding Cladding 125μm Both interfaces fea- multimode applications, while the
Coating 250μm
ture duplex configu- MT-RJ connector is recommended for
rations and a small use in legacy applications only. Field
Singlemode fi ber cores are 9 μm in diameter, while
pluggable form with termination of MT-RJ connectors is
multimode fi ber cores may be 50 or 62.5 μm. Regardless of
core size, the cladding is 125 μm and the coating 250 μm. external plug latch not recommended for singlemode
that is approximately applications.
due to their duplexing capability. Both the same size as the 8-position modu- Array optical fi ber connectors are
ST and SC connectors may be field- lar plug used for copper connections. the newest recognized style of opti-
terminated using an epoxy/polish or The LC connector may be field termi- cal fi ber interfaces and are intended to
mechanical splice method. nated using an epoxy/polish method support extremely high-density envi-
Small form factor (SFF) refers to a or mechanical splice method. The ronments as well as emerging tech-
family of optical fi ber interfaces that MT-RJ connector is field terminated nologies such as 40GBase-SR4 and
support double the connector density using a traditional no-epoxy/no-pol- 100GBase-SR10 that will require more
of traditional optical fi ber connectors. ish mechanical splice termination than two optical fi bers per link or

_______________


A

BMaGS
E F

A

BMaGS
E F

:: INSTALLATION ::

channel. There are typically 12 or 24 skill-level requirements are higher, benefits to this approach are the assur-
fibers in an array connector, although which may increase the project instal- ance of low-loss performance at the
one array connector may support lation costs. No-epoxy/no-polish and interconnection and the elimination of
as many as 144 fibers. A multi-fiber certain mechanical-splice-style termi- the need for endface inspections and
push on (MPO) style interface is the nation methods require less installation possible connector reterminations.
most basic array interface. MTP opti- skill than the epoxy/polish method, Trunking cable assemblies provide
cal fiber connectors are intermateable however the connectors used in con- an efficient alternative to field-termi-
with MPO connectors; however they junction with mechanical termination nated components or splice connec-
are engineered to deliver improved methods are more expensive and the tions and allow up to 75% faster field
mechanical and optical performance performance (especially using the no- deployment times. Trunking cable
and are recommended for deployment assemblies are custom
in new installations. MPO/MTP con- Sample optical fiber cable constructions factory preterminated
nectors cannot be field terminated. Jacket and tested lengths of
Array or “plug-and-play” modules are Central strength member optical fi ber cable termi-
self-contained and typically support Rip cord nated on both ends with
the interconnection of two, 12-fiber Color coded tight-buffered SC, ST, LC, MT-RJ, or
fibers and jackets
MPO/MTP interfaces with 24 LC con- MPO/MTP optical fi ber
Aramid yarns
nections or one 12-fiber MPO/MTP Tight-buffered connectors that are sim-
interface with 12 SC or LC connections. Jacket
ply pulled and plugged
Water-blocking swellable in. When deploying
tape
Optical fiber cabling deployment trunking cable assem-
Gel-filled tubes
The most common optical fi ber cabling blies, cable-length
Water-blocking aramid yarn
deployment approach is to field termi- Central strength member
specification is criti-
nate the optical fi ber connectors to the Rip cord cal and precise plan-
optical fi ber cable using the appropri- Aramid yarns ning is required up front.
ate epoxy/polish or no-epoxy/no-pol- Loose-tube Color-coded fibers and tubes Trunking cable assem-
ish mechanical termination method. blies that have an MPO/
However, the new MPO/MTP plug- The environment in which the fi ber cable will be MTP connector on one
and-play modules and MPO/MTP array used, e.g. indoor or outdoor, will determine the cable’s or both ends are com-
construction and the treatment of the fi bers within
connectors are not supported by field monly referred to as
that cable.
termination and there are consider- “plug-and-play” cable
ations, such as installer expertise and epoxy/no-polish method) may be lower assemblies. MPO/MTP plug-and-play
the IT construction/upgrade schedule, and more variable. cable assemblies have the smallest
that may favor the use of factory-termi- Optical fiber pigtails feature a fac- connector profi le and, therefore, have
nated pigtails or trunking assemblies tory preterminated and tested SC, the smallest pathway, cabinet, and
over field termination methods. ST, LC or MT-RJ optical fi ber connec- rack-space requirements of all trunk-
The pros and cons of these termina- tor and a 1-meter stub of 62.5/125-μm ing cable assembly options.
tion methods are described here. multimode, 50/125-μm multimode, or Always maintain the fi bers’ polarity
Field termination supports the low- singlemode optical fi ber. The stub end to ensure the transmit fi ber is matched
est raw material cost for SC, ST, LC, of the pigtail is then fusion-spliced to to the receive port on each end of the
and MT-RJ optical fiber cabling sys- the optical fi ber. Fusion splicing pro- link or channel.
tems. However, the time needed for vides a consistent, nearly loss-free ter-
field termination is the longest of the mination and can be fast with proper VALERIE MAGUIRE is global sales
three deployment options and installer technicians and equipment. The main engineer with Siemon (siemon.com).
________


A

BMaGS
E F

A

BMaGS
E F

EMT BUSHINGS THE LOOP
L OW- C O S T H A N G E R
™

THE BEST in CABLE PROTECTION f o r C O M M U N I C AT I O N S C A B L E
5"
• Fast & easy 2" 2.5" TL50 Flexible and
press-on TL20 TL25 non-metallic,
installation The LOOP holds
• Holds tight as ▼ a 2" to 5"
cables are pulled
diameter bundle
EMT400 of CAT5 or
• Protects cable Also for rigid, fiber optic cable
from abrasion IMC and PVC without sagging,
rigid conduit bending or damaging
• Less expensive
TL50 the cable!
alternative to costly
for a
fittings when used The 2.5" TL25 holds
5" diameter
just for wire Listed for
Air Handling bundle the same amount of
Spaces cable as a J-hook at
In a variety of sizes 1/2 the COST!
for 1/2" to 4" EMT, rigid, PVC
© 2001-2006 Arlington Industries, Inc.

Listed for
Air Handling
Spaces

Patented.

Arlington 800/233-4717 • www.arlnew.com/emt Arlington 800/233-4717 • www.aifittings.com

A

BMaGS
E F

A

BMaGS
E F

Keep sensitive data under
lock and key.

Introducing the smartest keyed LC
system on the market.
Prevent unauthorized and inadvertent changes in sensitive
applications such as data centers, telecommunications
rooms, and workstation areas. Leviton’s new Secure
Keyed LC Fiber System creates an ideal lock-in system
with patch cords, trunks, and harnesses that can only
be removed with a matching color-keyed extraction
tool. The U.S.-made, patent-pending system works with
standard LC duplex or quad adapters, allowing you to
easily retroﬁt your network - without having to rebuild it.
For more information, contact Leviton Inside Sales at
800.722.2082 or online at leviton.com/securelc.

THE FUTURE IS ON
© 2010 Leviton Manufacturing Co., Inc. All rights reserved.

A

BMaGS
E F

A

BMaGS
E F

:: TECHNOLOGY ::

Codes, standards and technologies
driving green building development
Performance, Green Buildings Except
Low-Rise Residential Buildings.
A jointly developed building code aims to increase Describing the standard as “an alter-
energy efficiency in newly constructed facilities. nate path of compliance,” USGBC
says it “is a set of technically rigorous
BY PATRICK McLAUGHLIN requirements, which like the IGCC,
covers criteria including water use effi-
Earlier this year a group of organiza- USGBC explained that ICC and ciency, indoor environmental qual-
tions from various construction-indus- ASHRAE have collaborated for ity, energy efficiency, materials and
try sectors announced the culmina- decades to develop codes and stan- resource use, and the building’s impact
tion of their collaborative effort in the dards for the design, construction, on its site and its community. Standard
form of a model building code aimed operations and maintenance of resi-
at advancing green building prac- dential and commercial buildings
tices in the United States. Dubbed in the U.S. as well as internation-
the International Green Construction ally. In coordination with the efforts
Code (IGCC), the specification rep- of those two bodies, the USGBC has
resents “the merger of two national led a green-building movement cen-
efforts to develop adoptable and tered on its Leadership in Energy and
enforceable green building codes,” Environmental Design (LEED) Green
the USGBC stated when announcing Building rating, which was launched
it in March. “The IGCC provides the 10 years ago.
building industry with language that “Leveraging ICC’s unrivaled deliv-
both broadens and strengthens build- ery infrastructure to reach all 50 states
ing codes in a way that will accelerate and more than 22,000 local jurisdic-
the construction of high performance tions and ASHRAE, USGBC and IES’s
green buildings across the U.S.” technical strengths, this partner-
It resulted from efforts put in by ship will accelerate the proliferation of
the International Code Council (ICC; green building codes and standards “Organizations working collaboratively
www.iccsafe.org); the American developed jointly by ICC, ASHRAE will advance green buildings
nationwide in a way that was never
Society of Heating, Refrigeration and and USGBC and IES,” the USGBC fur-
before possible.” –Rick Fedrizzi, USGBC
Air Conditioning Engineers (ASHRAE; ther stated. president and CEO.
www.ashrae.org); the U.S. Green The organization then specifi-
Building Council (USGBC; www.
____ cally pointed out the significance of 189.1 was written by experts represent-
usgbc.org);
_______ and the Illuminating a specific standard within the IGCC: ing all areas of the building industry
Engineering Society of North America ANSI/ASHRAE/USGBC/IES Standard who contributed tens of thousands of
(IES; www.iesna.org). 189.1 Standard for the Design of High man hours. Developed in a little over


A

BMaGS
E F

A

BMaGS
E F

:: TECHNOLOGY ::

three years, the standard underwent the wrong reasons since the mortgage construction of the facility’s structured
four public reviews in which some meltdown that began in 2008. But the cabling system played little or no role
2,500 comments were received.” organization gained a favorable head- in its earning LEED certification. Five
Executives from the organiza- line recently as it reached a milestone years ago cabling systems may not
tions that collaborated on the IGCC related to the USGBC’s LEED pro- have appeared at all on the USGBC’s
offered comments on the importance gram. Five years ago Fannie Mae’s proverbial radar screen. More recently
of the groups’ collective work. ICC 247,000-square-foot data center was however, the group has begun to pay
chief executive officer Richard Weiland the fi rst to earn LEED certification. more attention to a cabling system’s
said, “The IGCC provides a vehicle for The organization recently announced role in the total facility’s sustainability.
jurisdictions to regulate green for the that in the five years since earning the Last November the USGBC issued
design and performance of new and designation, the facility has realized what it calls LEED Pilot Credit 2.
renovated buildings in a manner that $1.7 million in energy savings, which Organizations that want to earn LEED
is integrated with existing codes as an has resulted in a 35% cost reduction in certification must accumulate enough
overlay, allowing all new buildings to that time. credits to qualify. The USGBC uses
reap the rewards of improved design “When it was decided that Fannie pilot credits to test and refi ne its cred-
and construction practices.” Mae’s data center should be con- iting process. The pilot credit issued
ASHRAE president Gordon Holness structed to meet LEED requirements, in November is the fi rst to mention a
said combining the expertise of his there was a host of challenges for the building’s wiring and cable jacketing;
organization with that of the ICC “will architects and engineers because there it specifically mentions electrical cable
accelerate our transformation to more was no previous model to follow,” said and wire jacketing. Its official name is
sustainable building practices.” Fannie Mae’s executive vice president Pilot Credit 2: PBT Source Reduction:
USGBC’s president and CEO Rick of operations and technology Edward Dioxins and Halogenated Organic
Fedrizzi said the council has “long Watson. “We’re pleased that the energy- Compounds. “PBT” stands for persis-
recognized the need to reach beyond saving features that earned the presti- tent bioaccumulative toxic chemicals.
the market leaders served by LEED gious LEED certification have helped The credit’s stated intent is to reduce
to accomplish” its mission of market Fannie Mae be more environmentally the release of PBTs associated with the
transformation. “Broadening the scope responsible and cut costs as well.” life cycle of building materials. While
of the codes and establishing a higher According to Fannie Mae, among the credit mentions electrical cable
floor allows us to continue to raise the energy-saving innovations built exclusively, USGBC communications
the ceiling, a critical factor in how the into the data center are an irrigation manager Ashley Katz explained, “The
building industry is working to miti- design that uses waste water from the opportunity to use an alternative cable
gate climate change. We are thrilled cooling plant and captured rain water, to achieve this credit would extend to
to see this set of complementary green coupled with landscaping that features communications cable, but the credit
building codes and standards; our drought-tolerant plants. The facil- language intentionally doesn’t seek
organizations working collaboratively ity preserves nearly 13,000 gallons of to detail one type of cable and its use
will advance green buildings nation- municipal water daily and has saved from another.”
wide in a way that was never before more than 23 million gallons over five In order to gain the credit, a facil-
possible.” years, it adds. While the data center ity must use materials without haloge-
was being built, regionally manufac- nated organic compounds for at least
A million-plus in savings tured materials were used and 80% of 75%, by cost, of the materials total in
The Federal National Mortgage construction waste was recycled. a minimum of three out of four groups.
Association, commonly known as In addition to building-installed cable
Fannie Mae (FNMA; www.fannie-
_________ Cable and LEED credits and wire jacketing, the other groups
______ has been in the news for all
mae.com) As has historically been the case, the are exterior components; interior


A

BMaGS
E F

A

BMaGS
E F

:: TECHNOLOGY ::

fi nishes; and piping, conduit and elec- credit issue as an opportunity to capi- and can speak to the symbiosis
trical boxes. talize on the halogen-free design of the between intelligent buildings and
Polyvinyl chloride (PVC) and fluo- product line it calls 17 Free—referring energy efficiency.
rinated ethylene propylene (FEP) are to Group 17 of the Periodic Table of A recent market study commis-
two of the halogenated organic com- Elements, which includes halogens. sioned by CABA and conducted
pounds covered in the credit. Both are by Building Services Research and
used in high quantities to manufacture Building intelligence Information Association (BSRIA;
communications cable; in the case of Over the past half-decade many data www.bsria.co.uk) found that energy
plenum cable FEP is used, while PVC center developers have embraced conservation is the most important
is used in cables of all ratings includ- LEED and incorporated its credit sys- driver for growth in the intelligent and
ing plenum, riser and general. As such, tem into their construction processes. integrated building technology mar-
the communications cables typically And while some data center facili- ketplace. The research also found that
used in buildings today will not help a ties have been noted for their LEED advanced technologies are taking
building owner gain this pilot credit. certifications, the commercial build- on a wider role in integrating build-
Nearly coinciding with the USGBC ing space has seen a growing corre- ing services such as lighting controls,
issuing this pilot credit, General Cable lation between energy efficiency and fi re detection and alarm and physical
(www.generalcable.com) introduced a building intelligence. The Continental security systems.
set of halogen-free riser-rated cables Automated Buildings Association
it had been developing for a number (CABA; www.caba.org) is an organiza- PATRICK MCLAUGHLIN is our chief
of years. General saw the LEED pilot tion focused on intelligent buildings, editor.

__________________

A

BMaGS
E F

A

BMaGS
E
F

Utility Products Conference & Exposition

Be in the spotlight

February 1 - 3, 2011 | San Diego, Calif.
San Diego Convention Center
w w w. u t i l i t y p r o d u c t s e x p o . c o m

The Utility Products Conference & Exposition brings the pages of Utility Products magazine
to life and brings together buyers and sellers of power, telecom, CATV and water equipment,
providing them an opportunity to learn firsthand about their industries’ latest products.

Owned & Produced by: Flagship Media Sponsor: Supporting Publications: Host Utility:

A

BMaGS
E
F

A

BMaGS
E F

:: DATA CENTER ::

EPA tackling energy efficiency
in storage equipment
the process, followed by a stakeholder
meeting at which the draft was dis-
Agency issues first draft of Energy Star specification cussed. Official comments on the first
one year after announcing the program. draft were due to the EPA by May 21.
Fanara pointed specifically to the
BY PATRICK McLAUGHLIN efficiency of storage power supply
units (PSUs) as an area of continued
Add storage equipment to the list Development timeline study for this specification. He said,
of data center technologies that will To that end, the process the EPA is “With the understanding that storage
soon be part of the United States taking to establish the rating pro- PSUs are often installed in redundant
Environmental Protection Agency’s gram for data center storage is essen- configurations, EPA intends to focus
(EPA) Energy Star program (www.
____ tially the same as it has taken for the its efforts on encouraging: 1) the use
energystar.gov). In April the EPA
__________ data center facilities and server pro- of PSUs that are most efficient at low
issued a fi rst draft of the Energy Star grams. It announced the storage pro- loads (<40%); 2) right-sizing of PSUs to
Program Requirements for Data Center gram in April 2009; at that time it application requirements; and 3) novel
Storage. As we previously reported, the stated that after market review and approaches to achieve overall system
agency has also established an Energy discussions with product manufac- efficiencies.”
Star program for computer servers, is turers, industry associations and According to the Storage
about to officially launch a program for other parties, “EPA concluded that IT Networking Industry Association
data center facilities, and is in the early purchasers would benefit from access (SNIA; www.snia.org) a power sup-
stages of developing a program for to standardized information about the ply unit (or simply power supply) is
uninterruptible power supplies (UPSs). energy performance of storage equip- “a component which converts an AC
On April 9 the EPA sent to all inter- ment made available through the or DC voltage input to one or more
ested stakeholders Draft 1 Version 1.0 Energy Star program.” DC voltage outputs for the purpose
of the storage document. In an accom- In June 2009 a framework document of powering a system or subsystem.
panying letter, Andrew Fanara of the was established and the next month at Power supplies may be redundant and
agency’s climate protection partner- a stakeholder meeting that document’s hot swappable.” It goes on to say that,
ships division and Energy Star program contents were discussed. Over the fol- “In storage subsystems, power distri-
manager acknowledged “there are lowing months the EPA held a test- bution units, power supplies, cooling
many aspects of Draft 1 that are still ing workshop for storage equipment, devices and controllers are often con-
to be determined based on the results established a data-collection procedure figured to be redundant.”
of ongoing analysis,” and that Draft 1 and held a stakeholder information ses-
represents the EPA’s “latest thinking sion coinciding with the Green Grid Much work to be done
based on stakeholder comments on the Technical Forum in February 2010. Draft 1.0 of the Energy Star specifica-
specification framework and subse- Issuing the first draft of the program’s tion includes no figures at all for PSU
quent meetings with industry.” requirements was the next step in power factor requirements. The draft


A

BMaGS
E F

A

BMaGS
E F

:: DATA CENTER ::

includes the following note. “EPA will familiarity with the NPL concept in urges further research or pilot pro-
not be implementing Net Power Loss both manufacturer and end user com- grams on NPL to evaluate benefits of
(NPL) requirements in the Version munities. EPA continues to believe the metric to end users.”
1.0 specification. During the com- that power supply requirements The SNIA has been actively
puter server specification develop- should show the impact of power sup- involved in each step of the process.
ment process, stakeholders expressed ply sizing and sourcing practices, and The association formed its Green
broad concern with the approach, intends to address this in future ver- Storage Initiative (GSI) in 2007, so it
both in terms of testing burden and sions of the specification. EPA also has been leading storage energy-effi-
ciency efforts for years. The group
recently stated, “The SNIA has sub-
mitted 31 data sets to the EPA for their
data collection project and contin-
ues to work closely with the EPA to
ensure efforts, initiatives and industry
resources are complementary for users.
Several member companies use the
SNIA as a way to anonymously submit
data to the EPA. The SNIA has also
shared test data with the EPA for vali-
dating power supply efficiency mea-
surement methods.”
While the EPA may have officially
issued an initial draft of this speci-
fication, it realizes it has significant
research and effort ahead of it before it
will produce a fi nished product. PSUs
represent just one of several prod-
uct and technology types the EPA
must sort out before it can realistically
assign efficiency metrics. Fanara said,
“A discussion of storage system soft-
ware as a contributor to overall system
energy is included in … the document.
EPA recognizes the energy efficiency
potential of software features such as
data de-duplication, data compression,
_______________
delta snapshots and thin provisioning.”
The agency had not even fi nished
Version 1.0 of the specification for com-
________
puter servers before it began work
on Version 2.0. It may take a similar
approach with this storage spec.

Patrick McLaughlin is our chief editor.


A

BMaGS
E F

A

BMaGS
EF

:: EDITOR’S PICKS :: C OMPILED BY PATRICK McL AUGHLIN

Technologies and the paper’s author, comments, “Our goal
Terminate RJ-45s with one squeeze with this paper is to share insights from our more than 25
ICC’s (www.icc.com) JackEasy is described as an all-in- years of experience designing, building and managing data
one tool that seats and terminates an 8-position 8-contact centers and critical facilities for some of the biggest names
RJ-45-style connector, and simultaneously cuts off excess in commercial enterprises and government agencies. The
wires, with a single squeeze. It is made with a 16-gauge TCO approach we recommend will prepare data center
steel frame and has an ergonomically designed handle. leaders to confront various problems that arise during the
JackEasy includes two blades to terminate ICC’s easy (EZ) planning process and position themselves for success.”
and slim-body (HD) style jacks, the company says. While Hagan was the paper’s primary author, other
contributors included Lee’s director of technical engineer-
ing John Lusky; manager of mechanical engineering Tuan
Hoang, P.E.; and mechanical project engineer Scott Walsh,
P.E., LEED A.P.
“The data center market outlook shows significant
growth in 2010 and 2011,” Hagan adds. “We stand ready to
support both commercial and public-sector organizations
in developing the most time- and cost-efficient plans to
build sustainable data centers that will meet both uptime
requirements and future business goals.”

Demarc extensions lack guidance of standards
The white paper entitled “The Demarc Extension and its
Critical Role in Enterprise Network Telecommunications
The tool is also designed with a surface base, allowing Infrastructure” authored by Concert Technologies exposes
it to rest on a table or floor for support during termination. the fact that the loss of standardization for this impor-
The manufacturer says that by using this tool, installers tant piece of cabling has led to poor installation practices.
save time because the one-squeeze termination is carried Addressing the information needs of telecommunications
out by a balanced blade that will not damage connectors. agents and carriers, the paper arms these professionals
with the knowledge to ensure the circuit’s complete oper-
Pinpointing data center planning mistakes ability at the time of delivery.
Data center facilities design, construction and man- The paper defi nes the demarc extension as follows: The
agement fi rm Lee Technologies (www.leetechnologies. transmission path originating from the interface of the
com)
___ recently released a white paper entitled “The Top access provider’s side of the telecommunications circuit
9 Mistakes in Data Center Planning: The Total Cost of demarcation point within a premises, and ending at the
Ownership Approach to Building or Expanding Data termination point prior to the interface of the edge cus-
Centers.” The company says the paper addresses the tomer premises equipment. This may include in-segment
question, “Why do so many data center builds and expan- equipment, media converters and patch cords as required
sions fail?” by pointing out the most common, and most to complete the circuit’s transmission path to the edge
significant, mistakes organizations make when designing customer premises equipment.
and building new data center space. The paper also exam- “This white paper sets industry standards and guid-
ines an effective way to achieve success through the com- ance for the most important transmission path in commer-
pany’s TCO approach, it says. cial buildings,” said Dennis Mazaris, developer of Demarc
Mike Hagan, executive vice president at Lee Extension Nationwide (www.demarcextension.com) and


A

BMaGS
EF

A

BMaGS
E F

:: EDITOR’S PICKS ::

president of Concert Technologies implementation of ITS infrastructure.
(www.concerttech.com). “Without BICSI releases RITP The RITP exam includes 150
standards and guidelines, the poten- credential details questions drawn from BICSI’s
tial to install the demarc extension BICSI (www.bicsi.org) has released its Telecommunications Distribution
incorrectly increases and can threaten Registered Information Technology Methods Manual. It is a closed-book
business and affect productivity. This Professional (RITP) credential exam exam with multiple-choice and true/
issue is important for the telecom application. The RITP is similar to false questions. The organization rec-
agent and the carrier to address in the Registered Communications ommends a minimum of 125 hours of
order to increase customer satisfaction Distribution Designer (RCDD) creden- study in preparation for the exam.
and ensure future business.” tial with the exception that there is no The fi rst RITP beta exam was held
The paper also emphasizes the requirement for actual design expe- during BICSI’s Canadian Conference
impact that this piece of cabling, the rience. The focus of the designation and Exhibition in May, with another
demarc extension, has on businesses are those individuals who work in the scheduled during its European
and buildings across the United States information transport systems (ITS) Conference and Exhibition this month.
and internationally. It also highlights industry but do not design ITS sys- The fi rst official exam will be held at
the following topics: importance of the tems, or have limited design experi- the 2010 BICSI Fall Conference and
demarc extension to essential circuit ence, including instructors, educators, Exhibition in September.
delivery and customer satisfaction; project managers and sales personnel.
isolating circuit versus inside-wir- The RITP requires a minimum of Poster highlights 10
ing problems quickly; the correlation two years of industry-related experi- fiber-safety rules
between the loss of standardization ence, including but not limited to mili- A free downloadable poster offered
and poor installation practices; clarifi- tary experience, site or project man- by The Fiber Optic Association (FOA;
cation regarding who is responsible for agement, or industry sales. Applicants www.thefoa.org) highlights important
the installation; installer survey data also need either to have graduated safety rules for installers and tech-
for demarc extensions; demarc exten- with an Associate of Science, Bachelor nicians handling fi ber-optic cabling.
sion standards and resources. of Science, or Master of Science degree Derived from the safety section of
in an approved technical field of the FOA’s online reference guide, the

:: BULLETIN BOARDS
study or have achieved two or poster lists 10 detailed safety mea-
more approved industry certifica- sures to take when working with fi ber.
tions. Applicants must also have “Safety in the lab or on the job site
successfully passed BICSI’s ITS must be the number one concern of
Design Fundamentals exam. everyone,” the FOA says in its online
BICSI explains that the pri- guide. “Besides the usual safety issues
mary difference between the for construction, generally covered
RCDD and RITP written exams under OSHA rules, fi ber optics adds
is the distribution of knowledge concerns for eye safety, chemicals,
versus design-application ques- sparks from fusion splicing, disposal
tions. The RITP exam is focused of fi ber shards and more. Before begin-
on the knowledge content of the ning any installation, safety rules
technology involved in the ITS should be posted on the classroom
industry rather than the work- wall, lab wall or on the job site and
ing application of the technol- reviewed with all on-site personnel.”
_________
ogy required to produce design The poster enables network owners,
documents for construction and crew foremen and other responsible


A

BMaGS
E F

A

BMaGS
EF

SHOWCASE ::
Extend T1/E1 over:

Ethernet
IP/Ethernet

Fiber
Miles of Fiber

Wire
Up to Several Miles
of 2-pair Wire

www.textender.com
800-432-2638

Data Comm for Business, Inc.
_____________

~Global Solutions in Optical Precision~

Do you really want to trust
your network’s reliability
to the lowest bidder?

Seikoh Giken’s MPO Platinum cabling products are uniquely
designed and engineered for all multi-channel broadband
and high density data networks.

Contact us today to find out more about how our full line
of TechMate products can improve your network’s
performance and integrity.
Your customers will be glad you did.

____________
Tel: 770-279-6602 ● www.SeikohGiken.com ● Sales@sg-usa.com


A

BMaGS
EF

A

BMaGS
E F

:: EDITOR’S PICKS ::

personnel to keep fi ber safety rules in front of every fi ber architecture deployed within buildings. 802.11 systems
technician. comprise distributed access points with connected anten-
nas, rather than distributed antennas. And he further cau-
Wireless expert addresses mixing Wi-Fi, DAS tions users not to give in to the temptation to include
In a recent post on The Cabling Blog, Oberon Inc.’s (www.
____ private wireless LAN traffic over the DAS. “Generally
oberonwireless.com) director of engineering and co- speaking,” he says, “When you use something in a way for
founder Scott Thompson discussed dos and don’ts of which it was not intended, you don’t get the results you
in-building distributed antenna systems (DAS). As we want.” He also points out that Cisco (www.cisco.com) has
reported in our April issue, in-building DAS are growing issued a positioning statement indicating the company
in popularity as wireless-device users demand connectiv- “does not certify, endorse, or provide RF support for Wi-Fi
ity everywhere, including inside buildings constructed of deployments over any distributed antenna system.”
materials that can interfere with the wireless antenna sys- “Although not specifically precluding the use of Cisco
tems residing outdoors. wireless LAN products in a DAS, the statement recom-
In his post, Thompson notes, “Clearly as people become mends special consideration of signal coverage, client-to-
more dependent on mobile voice and data services, there access point density, client roaming, location-based ser-
is a growing expectation for network connectivity every- vices, and the impact on the 802.11n antennas used by
where, indoors and outdoors. DAS and related in-building 802.11n access points,” Thompson says in the blog.
wireless systems provide a means to match this expecta- We have asked Thompson to turn his blog entry into a
tion, even in the most challenging indoor environments.” full-scale article for publication in this magazine. He has
He stresses, though, that a DAS is a different architec- agreed to do so and we look forward to bringing that article
ture than the 802.11-based wireless local area network to you in an upcoming issue.

INDEX OF ADVERTISERS
Anixter, Inc. ....................................................................................3
ADVERTISING SALES OFFICES Arlington Industries, Inc. .............................................................. 17
MAIN OFFICE 98 Spit Brook Road LL-1, Nashua, NH 03062-5737
(603) 891-0123, fax: (603) 891-9245 Berk-Tek Inc. ................................................................................C4
BTR Netcom .................................................................................. 15
Group Publisher Susan Smith Austria, Eastern Europe,
(603) 891-9447 Germany, Northern Switzerland Byte Brothers ...............................................................................24
susans@pennwell.com Holger Gerisch
Associate Publisher/National Sales +49 8801-302430 Corning Cable Systems ................................................................C2
Manager Ed Murphy fax: +49 8801 913220
holgerg@pennwell.com Datacom for Business .................................................................. 27
(603) 891-9260; fax: (603) 891-9245
edm@pennwell.com India Rajan Sharma Diamond Ground Products, Inc. .................................................... 27
Reprints The YGS Group +91 11 686 1113
fax: +91 11 686 1112 FSR, Inc. ....................................................................................... 27
cim@theygsgroup.com
rajan@interadsindia.com
Director, List Sales Bob Dromgoole ICC Premise Wiring ........................................................................ 7
(603) 891-9128; bobd@pennwell.com Israel Dan Aronovic
+972 9 899 5813 Leviton Network Solutions ........................................................... 18
INTERNATIONAL aronovic@actcom.co.il
Live Wire & Cable .........................................................................26
U.K. & Scandinavia Tony Hill Asia Adonis Mak
+44 0 1442-239547 +852 2 838 6298 Optical Cable Corporation ..............................................................9
tonyh@pennwell.com fax: +852 2 838 2766
adonism@actintl.com.hk Seikoh Giken USA, Inc. ................................................................. 27
France, Netherlands, Belgium,
Andora, Greece, Spain, Portugal, Japan Manami Konishi Senko Advanced Components Inc. .................................................4
Western Switzerland +81 3 5771 8886
Luis Matutano fax: +81 3 5771 8887 TVC Communications ...................................................................10
+33 1 39 66 16 87 manami.konishi@ex-press.jp
fax: +33 1 39 23 84 18 Tyco Electronics Corporation ........................................................ 21
Taiwan Cindy Yang
luism@pennwell.com +886 2 2396-5128 #246
fax: +886 2 8751 8861 The index of advertisers is published as a service, and the publisher
does not assume any liability for errors or omissions.
cindy@arco.com.tw


A

BMaGS
E F

A

BMaGS
E
F

FIRESTOPPING Products,
Technologies, and Systems
MODERATED BY: Patrick McLaughlin, Chief Editor

VIEW THIS WEBCAST TODAY
WHO SHOULD ATTEND:
OWNERS and MANAGERS of structured cabling systems that run on multiple
floors of a building, and/or that penetrate a building‚ walls; CONTRACTORS who
install riser or horizontal cabling systems, firestopping products, or cable trays;
CONSULTANTS who specify cabling projects that should include the installation
of firestopping systems.
SPONSORED BY:

This Webcast provides detailed information
on two important firestop-related topics.
PRESENTATION 1:
Overview of UL 1479
This presentation details what the UL 1479 test measures, as well as
the corresponding ratings a firestop system can achieve depending on its
performance in these tests. The presentation also explains the letter-based
ratings within UL 1479: the mandatory F and T ratings as well as the
optional L and W ratings.
PRESENTATION 2:
The Evolution of Firestopping Technologies
This presentation looks at the familiar set of tried-and-true firestopping
devices and materials, and also discusses some of the latest, innovative
firestop systems as well as the trends that led to their development.

VIEW ALL CURRENT, FUTURE AND ARCHIVED EVENTS AT:

www.cablinginstall.com
A

BMaGS
E
F

A

BMaGS
E F

BECAUSE YOUR BUSINESS RUNS THROUGH US

Verified performance. Beyond the standards.
Beyond our specifications. Beyond your expectations.
For nearly two decades, our LANmark™ UTP cables have been leaders in the cabling
industry. LANmark-10G2, LANmark-2000, LANmark-1000, and LANmark-350™ continue
to be four of the highest performing UTP cables manufactured in the United States today.
Through the ETL LANmark Verification Program, Intertek now provides you with independent
third-party verification that LANmark Category 5e, 6, and 6a cables will perform to our
specifications, not just to the standard. So you can be sure that you receive every dB of
performance that you specify. Who else other than Berk-Tek will verify and guarantee that?
No matter which LANmark UTP product you choose, all offer guaranteed performance that
exceed industry standards, providing headroom to support evolving applications…
for many years to come.

For more information on verified performance of Berk-Tek’s premium LANmark UTP
products, call 1-800-BERK-TEK or visit www.berktek.com. Search Term: ETL VERIFIED
LANmark-10G2
LANmark-1000

LANmark-2000
LANmark-350

www.berktek.com

A

BMaGS
E F

Cim 20100601 jun_2010

More Related Content

Viewers also liked

Similar to Cim 20100601 jun_2010

More from Carlos Alberto Bonatto

Cim 20100601 jun_2010