ZURCON SCRAPER SWP
Single-Acting - Metal-Encased Wiper -
- Material - Zurcon Polyurethane + Metal -
Materials
Standard application
Zurcon Polyurethane: 93 Shore A
Color: Turquoise
Metal case: Non-alloyed steel
DIN 1624
Material set code: Z2022
1. This document provides installation and use instructions for the iZi Kid i-Size child car seat. It is approved for rear-facing use by children between 61-105 cm in height and up to 18 kg in weight.
2. The instructions emphasize that the seat must only be installed in the rear seats and must never be installed in a front passenger seat if the airbag is activated. It provides details on how to properly install the seat using ISOFIX anchors or vehicle seats belts.
3. The document stresses that the seat harness must always be securely buckled and tightened around the child, and that the floor support must be fully engaged when installing the seat. It provides guidelines for positioning the sleeping child and
Turcon quad ring , x-rings,four lip sealsBanana Yuan
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...Banana Yuan
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...Banana Yuan
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
1. This document provides installation and use instructions for the iZi Kid i-Size child car seat. It is approved for rear-facing use by children between 61-105 cm in height and up to 18 kg in weight.
2. The instructions emphasize that the seat must only be installed in the rear seats and must never be installed in a front passenger seat if the airbag is activated. It provides details on how to properly install the seat using ISOFIX anchors or vehicle seats belts.
3. The document stresses that the seat harness must always be securely buckled and tightened around the child, and that the floor support must be fully engaged when installing the seat. It provides guidelines for positioning the sleeping child and
Turcon quad ring , x-rings,four lip sealsBanana Yuan
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...Banana Yuan
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...Banana Yuan
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
China turcon Slydring wear ring for pistonBanana Yuan
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
The Zurcon® L-Cup® is a single-acting low-friction seal that provides hydrodynamic back-pumping ability, low friction to reduce heat generation, low breakout force, and very low stick-slip. It has high extrusion resistance, optimal sealing lip geometry for high sealing ability, and no entrapped oil or grease between the seal and groove. The Zurcon® L-Cup® was designed to meet customer demands and is interchangeable with existing U-Cup grooves.
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
The document describes the Turcon Variseal M2 single-acting spring-energized seal. It lists the materials used to make the seal ring and spring, including that they are physiologically safe. It also describes advantages like resistance to fluids and chemicals, low friction, precision control, and ability to handle rapid temperature changes without contamination. The document provides ordering codes for the product.
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"Emmanuel Onwumere
In iOS 18, Apple has introduced a significant revamp to the Control Centre, making it more intuitive and user-friendly. One of the standout features is a quicker and more accessible way to shut down your iPhone. This enhancement aims to streamline the user experience, allowing for faster access to essential functions. Discover how iOS 18's redesigned Control Centre can simplify your daily interactions with your iPhone, bringing convenience right at your fingertips.
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
China turcon Slydring wear ring for pistonBanana Yuan
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
The Zurcon® L-Cup® is a single-acting low-friction seal that provides hydrodynamic back-pumping ability, low friction to reduce heat generation, low breakout force, and very low stick-slip. It has high extrusion resistance, optimal sealing lip geometry for high sealing ability, and no entrapped oil or grease between the seal and groove. The Zurcon® L-Cup® was designed to meet customer demands and is interchangeable with existing U-Cup grooves.
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
The document describes the Turcon Variseal M2 single-acting spring-energized seal. It lists the materials used to make the seal ring and spring, including that they are physiologically safe. It also describes advantages like resistance to fluids and chemicals, low friction, precision control, and ability to handle rapid temperature changes without contamination. The document provides ordering codes for the product.
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"Emmanuel Onwumere
In iOS 18, Apple has introduced a significant revamp to the Control Centre, making it more intuitive and user-friendly. One of the standout features is a quicker and more accessible way to shut down your iPhone. This enhancement aims to streamline the user experience, allowing for faster access to essential functions. Discover how iOS 18's redesigned Control Centre can simplify your daily interactions with your iPhone, bringing convenience right at your fingertips.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
1. ZURCON SCRAPER SWP
Single-Acting -
- Metal-Encased Wiper -
- Material -
- Zurcon Polyurethane + Metal -
Materials
Standard application
Zurcon Polyurethane: 93 Shore A
Color: Turquoise
Metal case: Non-alloyed steel
DIN 1624
Material set code: Z2022
Advantages
- Space-saving construction
- Simple small installation groove
- Firm fit in the groove due to metallic press fit
- At regreasing of drag bearing, the scraper lip opens at
low overpressure; old grease can escape
- High wear resistance / long life
Application Examples
Due to their outstanding wiping capacities SWP scrapers
are recommended wherever there are dusty and humid
conditions and especially for the following applications:
- Mobile hydraulic machinery
- Construction machinery
- Link pin seals
- Lift trucks
- Truck cargo cranes
- Agriculture machinery
Installation Dimensions / TSS Part No.
WSKCB1000
WSKCC1125
WSKCC1250
WSKCC1375
WSKCC1500
WSKCC1625
WSKCC1750
WSKCC1875
WSKCC2000