Certificate III in Engineering Mechanical Trade - Lee Cain
•
1 like•657 views
Lee Cain has fulfilled the requirements for a Certificate III in Engineering - Mechanical Trade. The certificate was issued on June 6, 2008 by the Department of Further Education, Employment, Science and Technology. It was achieved through new apprenticeship arrangements and is recognized within the Australian Qualifications Framework.
Report
Share
Report
Share
Download to read offline
Recommended
TRA outcome letter
The document is a letter from Trades Recognition Australia assessing an application for a skills assessment under the Skilled Worker Program. The application was successful for the occupation of Aircraft Maintenance Engineer (Mechanical). The applicant's evidence satisfied the formal training and employment requirements. The letter provides details of the successful assessment and next steps if the applicant wishes to request a review.
Graduation Certificate ANU
The document is a graduation statement from The Australian National University (ANU) that provides details about a graduate's award and academic achievements. It recommends that third parties use ANU's secure online verification system to validate the authenticity and details of the graduation statement, as the downloaded PDF version could have been tampered with. The verification system allows graduates to securely share documents with authorized individuals online.
NIBM Higher Dip.
This document is a statement of results for a student named Mr. Asela Hewapathirana from the National Institute of Business Management. It lists the grades he received in 10 subjects for the Higher Diploma in Business Management program. His overall grade was a Second Class Second Division. The grades ranged from B to D, with no subject below a D grade. The document also provides the key to the grading system used.
MSA - Outcome Letter
The document is a letter from Trades Recognition Australia (TRA) to Phuc Hong Le confirming that his skills assessment application was successful for the occupation of Electronic Instrument Trades Worker (General). Specifically, the letter confirms that Le's Vocational Graduate Diploma in Electronics - Automatic Control qualification was assessed as comparable to an AQF Certificate III, and that his 3 years of employment experience meets TRA requirements. The letter notes that while it represents a skills assessment, further licensing or registration may be required to work in some parts of Australia.
150713 MSA CDR Outcome Letter for 5100140
The document is a letter from Engineers Australia assessing an applicant's qualifications and work experience for skilled migration purposes. It finds that the applicant's competencies demonstrated in their report and their bachelor's degree from Cairo University meet the requirements for a Telecommunications Engineer occupation. The assessment determines the qualification is comparable to an Australian bachelor's degree level for awarding points under skilled migration point tests, but the final determination remains at the discretion of immigration authorities.
Loxton_Lauren Carol
This document is Lauren Carol Loxton's official transcript from the University of Cape Town. It shows that she completed a Bachelor of Commerce degree in 2015 with a specialization in Philosophy, Politics and Economics. She received several academic awards and honors during her undergraduate studies. In 2016, she began a Bachelor of Laws program. The transcript provides a complete record of her courses, grades, credits earned, academic awards and scholarships.
260575804 mcgill letter
This document is an acceptance letter from McGill University informing Mr. Kaio Morais that he has been accepted into their Licentiate in Music program for the Fall 2013 term. It outlines the details of his acceptance including his degree, program, and concentration. It also provides information on conditions of acceptance, music scholarship eligibility, and housing accommodation priority. The letter requests that he confirm his acceptance by June 1st and provides contacts for any additional questions.
Recommended
TRA outcome letter
The document is a letter from Trades Recognition Australia assessing an application for a skills assessment under the Skilled Worker Program. The application was successful for the occupation of Aircraft Maintenance Engineer (Mechanical). The applicant's evidence satisfied the formal training and employment requirements. The letter provides details of the successful assessment and next steps if the applicant wishes to request a review.
Graduation Certificate ANU
The document is a graduation statement from The Australian National University (ANU) that provides details about a graduate's award and academic achievements. It recommends that third parties use ANU's secure online verification system to validate the authenticity and details of the graduation statement, as the downloaded PDF version could have been tampered with. The verification system allows graduates to securely share documents with authorized individuals online.
NIBM Higher Dip.
This document is a statement of results for a student named Mr. Asela Hewapathirana from the National Institute of Business Management. It lists the grades he received in 10 subjects for the Higher Diploma in Business Management program. His overall grade was a Second Class Second Division. The grades ranged from B to D, with no subject below a D grade. The document also provides the key to the grading system used.
MSA - Outcome Letter
The document is a letter from Trades Recognition Australia (TRA) to Phuc Hong Le confirming that his skills assessment application was successful for the occupation of Electronic Instrument Trades Worker (General). Specifically, the letter confirms that Le's Vocational Graduate Diploma in Electronics - Automatic Control qualification was assessed as comparable to an AQF Certificate III, and that his 3 years of employment experience meets TRA requirements. The letter notes that while it represents a skills assessment, further licensing or registration may be required to work in some parts of Australia.
150713 MSA CDR Outcome Letter for 5100140
The document is a letter from Engineers Australia assessing an applicant's qualifications and work experience for skilled migration purposes. It finds that the applicant's competencies demonstrated in their report and their bachelor's degree from Cairo University meet the requirements for a Telecommunications Engineer occupation. The assessment determines the qualification is comparable to an Australian bachelor's degree level for awarding points under skilled migration point tests, but the final determination remains at the discretion of immigration authorities.
Loxton_Lauren Carol
This document is Lauren Carol Loxton's official transcript from the University of Cape Town. It shows that she completed a Bachelor of Commerce degree in 2015 with a specialization in Philosophy, Politics and Economics. She received several academic awards and honors during her undergraduate studies. In 2016, she began a Bachelor of Laws program. The transcript provides a complete record of her courses, grades, credits earned, academic awards and scholarships.
260575804 mcgill letter
This document is an acceptance letter from McGill University informing Mr. Kaio Morais that he has been accepted into their Licentiate in Music program for the Fall 2013 term. It outlines the details of his acceptance including his degree, program, and concentration. It also provides information on conditions of acceptance, music scholarship eligibility, and housing accommodation priority. The letter requests that he confirm his acceptance by June 1st and provides contacts for any additional questions.
4. ACCA status report_Mar2015
This document provides a summary of Thi Huyen Trang Tran's examination results, ethics and professionalism status, practical experience requirement status, and progress toward ACCA membership. It shows that she passed two papers in the December 2014 session and has passed or been exempted from several other papers. Her professional ethics module and performance objectives are not yet completed and she has no months of practical experience recorded. Overall, she has completed 9 of 14 exams required for membership but still needs to pass additional papers, complete her ethics requirement, gain relevant work experience, and fulfill performance objectives.
Transcripts
This academic transcript summarizes Chan Ying Rui's undergraduate degree program in Materials Engineering from the University of Malaya. It shows that she completed her degree in 2015 with distinction, maintaining a cumulative GPA of 3.78. Her specialization was in ferrous alloys and heat treatment. The transcript lists the courses she took each semester, the credits earned, and her grades which were mostly A's, showing excellent academic performance throughout her studies.
NATIONAL CERTIFICATE IN MOTOR MECHANIC
Alvin John Rigby completed an apprenticeship in motor mechanics on March 17th, 2002 in Zimbabwe. The apprenticeship included training in diesel and tractor mechanics. In April 2000, Rigby passed the National Certificate in Motor Vehicle Mechanics examination. A certificate was issued on March 17th, 2002 to certify that Rigby had completed his apprenticeship and examinations in motor mechanics.
National Apprentice & Industrial Training Authority Report on Industrial Trai...
National Apprentice & Industrial Training
Authority
Report on Industrial Training
At
CBL FOODS INTERNATIONAL (PVT) LTD
HABARAKADA ROAD,
RANALA,
SKN CAPE 2019 National Merit List by Subject
The document appears to be a list of top performing students in Cape exams in St. Kitts and Nevis ranked by subject. It includes the student number, name, school, and grades obtained for each student ranked in the top 100 in subjects like Accounting, Art and Design, Applied Mathematics, Biology, Caribbean Studies and others.
Adam Jaworski - ACCA Exam History
Adam Jaworski has completed both the ACCA Certified Accounting Technician Scheme and the ACCA Qualification. For the Technician Scheme, he passed all 8 exams between 2008-2009. For the ACCA Qualification, he received exemptions for 3 papers and passed 11 others between 2010-2014, leaving no papers left to complete under the current syllabus. The document provides Adam's examination history and results in detail over the period from June 2004 to June 2014 while pursuing the ACCA Certified Accounting Technician Scheme and ACCA Qualification.
Transcript.pdf(New)
This document is a transcript for graduate student Nitinkumar Patel showing his coursework and grades from 2014 to 2016 at Ryerson University's MEng Chemical Engineering program. It lists the courses taken each term, the grades received, grade points earned, and his academic standing. Over his graduate career, Patel earned a cumulative GPA of 3.430 taking 11 courses total and completing 10 courses with a combined total of 34.340 grade points.
ACCA Result
This document provides Mirza Shavez Ali Baig's examination results and progress toward ACCA membership. It shows that he passed the UK Advanced Taxation paper in December 2014 with 60%. It also lists the results of all his previous ACCA papers, and indicates he has completed the exam requirement but still needs to pass the Ethics module and gain relevant work experience to fulfill the remaining membership requirements.
Engineers australia chartered status
This document provides information for applicants seeking Chartered Status with Engineers Australia. It outlines the pathways and requirements to achieve Chartered Status as a Chartered Professional Engineer (CPEng), Chartered Engineering Technologist (CEngT), or Chartered Engineering Officer (CEngO). Applicants must be eligible for Engineers Australia membership and have a minimum of 3 years of professional experience. Chartered Status can be obtained through submitting an Engineering Practice Report and participating in a professional interview, completing a Professional Development Program, following the Mature Experienced Engineers Pathway, or through mutual recognition of an international qualification. Maintaining Chartered Status requires 150 hours of continuing professional development every 3 years and being subject to audit every 5 years. The
City & Guilds Engineering Achievement Certificate
This certificate document recognizes that Stephen Moore attended Royal Air Force, No 1 Radio School, Locking. It certifies that he successfully completed eight components of the City and Guilds of London Institute program in Electrical and Electronic Engineering Competences, receiving distinctions in general maintenance technology, maintenance organisation, electronic components, and digital electronics. The certificate was awarded in January 1995 and signed by the Director-General of the City and Guilds of London Institute.
Pokemon GO explained - The Hook Model
Varför är Pokémon GO så beroendeframkallande? Kanske kan vi besvara den frågan med hjälp av "The Hook Model"
Academic Certs
This document certifies that Chan Ying Rui completed the requirements for a Bachelor of Engineering (Materials) degree from the University of Malaya with Pass with Honours (With Distinction). It also includes certificates confirming Chan Ying Rui studied abroad as an exchange student at National Cheng Kung University in Taiwan from 2013 to 2014 and received an award for the best group presentation in a Polymer Engineering course at the University of Malaya.
BSST Official Transcript Sean
- Sean Peter Robinson graduated from the University of Southern Queensland with an Associate Degree of Spatial Science with Distinction in 2012 and a Bachelor of Spatial Science Technology in 2015, majoring in Surveying.
- The transcript lists the courses taken between 2008-2015, the terms, units, grades and grade points for each course, with most grades in the Distinction or High Distinction range.
- Exemptions were granted for several courses when he commenced his Bachelor's degree based on prior study. His overall GPA for the Associate Degree was 6.19 and 4.83 for the Bachelor's degree.
Lancaster University - Transcript
This official transcript from the University of Lancaster documents the educational achievement and qualifications of Martin Andreev. It shows that he earned a Bachelor of Business Administration with Second Class Honours (Division One) in European Management in July 2014. Over the course of his studies from 2010 to 2014, he completed various course modules, receiving grades ranging from 58 to 21.8. The transcript provides a detailed record of all courses taken, credits earned, and grades received to validate his degree award.
ABE diploma
Myint Myat AungZaw has been awarded the ABE Level 6 Diploma in Business Management by the Association of Business Executives for successful completion of units in corporate strategy and planning, international business case study, managing in organisations, strategic human resource management, and strategic marketing management. The diploma was issued on February 26, 2016.
Industrial training report
This report contains concise details of in-plant training received at Colombo Dockyard PLC to fulfill the industrial training requirements of B.Sc. Eng. degree program at University of Moratuwa.
Bachelor's degree
This document is an academic transcript for Osama Farag Abdel Krim Gad from the University of Malaya. It summarizes his coursework and grades for a Bachelor of Engineering in Civil Engineering from 2008 to 2012. It shows that he fulfilled the requirements for the degree program and was awarded Pass with Honours. His areas of specialization included structures, geotechnical engineering, transportation, water resources and construction management.
Scan_Doc0015
Sole Smidt received the National Senior Certificate from Hoerskool John Vorster in Gauteng, South Africa. She achieved the following percentages in her subjects: Afrikaans 78%, English 81%, Mathematical Literacy 84%, Life Orientation 90%, Business Studies 74%, Engineering Graphics and Design 65%, and Tourism 88%. Sole qualified for a bachelor's degree, diploma or higher certificate as published in the Government Gazette for admission to higher education.
Trade Certificate.PDF
This document certifies that Rowyn Nott has completed the requirements for a Certificate III in Engineering - Fabrication Trade from the Australian Trade Training College. It lists the 22 individual units of competency Rowyn achieved, which cover skills in mechanical cutting, brazing, thermal cutting, fabrication, shaping, assembly, manual and advanced welding techniques using multiple processes, repairs, geometric development, technical drawing interpretation, measurements, computations, occupational health and safety, planning, quality systems, communication, on-the-job training, use of hand and power tools, and basic penetrant testing. The certificate was issued on February 15, 2013.
More Related Content
What's hot
4. ACCA status report_Mar2015
This document provides a summary of Thi Huyen Trang Tran's examination results, ethics and professionalism status, practical experience requirement status, and progress toward ACCA membership. It shows that she passed two papers in the December 2014 session and has passed or been exempted from several other papers. Her professional ethics module and performance objectives are not yet completed and she has no months of practical experience recorded. Overall, she has completed 9 of 14 exams required for membership but still needs to pass additional papers, complete her ethics requirement, gain relevant work experience, and fulfill performance objectives.
Transcripts
This academic transcript summarizes Chan Ying Rui's undergraduate degree program in Materials Engineering from the University of Malaya. It shows that she completed her degree in 2015 with distinction, maintaining a cumulative GPA of 3.78. Her specialization was in ferrous alloys and heat treatment. The transcript lists the courses she took each semester, the credits earned, and her grades which were mostly A's, showing excellent academic performance throughout her studies.
NATIONAL CERTIFICATE IN MOTOR MECHANIC
Alvin John Rigby completed an apprenticeship in motor mechanics on March 17th, 2002 in Zimbabwe. The apprenticeship included training in diesel and tractor mechanics. In April 2000, Rigby passed the National Certificate in Motor Vehicle Mechanics examination. A certificate was issued on March 17th, 2002 to certify that Rigby had completed his apprenticeship and examinations in motor mechanics.
National Apprentice & Industrial Training Authority Report on Industrial Trai...
National Apprentice & Industrial Training
Authority
Report on Industrial Training
At
CBL FOODS INTERNATIONAL (PVT) LTD
HABARAKADA ROAD,
RANALA,
SKN CAPE 2019 National Merit List by Subject
The document appears to be a list of top performing students in Cape exams in St. Kitts and Nevis ranked by subject. It includes the student number, name, school, and grades obtained for each student ranked in the top 100 in subjects like Accounting, Art and Design, Applied Mathematics, Biology, Caribbean Studies and others.
Adam Jaworski - ACCA Exam History
Adam Jaworski has completed both the ACCA Certified Accounting Technician Scheme and the ACCA Qualification. For the Technician Scheme, he passed all 8 exams between 2008-2009. For the ACCA Qualification, he received exemptions for 3 papers and passed 11 others between 2010-2014, leaving no papers left to complete under the current syllabus. The document provides Adam's examination history and results in detail over the period from June 2004 to June 2014 while pursuing the ACCA Certified Accounting Technician Scheme and ACCA Qualification.
Transcript.pdf(New)
This document is a transcript for graduate student Nitinkumar Patel showing his coursework and grades from 2014 to 2016 at Ryerson University's MEng Chemical Engineering program. It lists the courses taken each term, the grades received, grade points earned, and his academic standing. Over his graduate career, Patel earned a cumulative GPA of 3.430 taking 11 courses total and completing 10 courses with a combined total of 34.340 grade points.
ACCA Result
This document provides Mirza Shavez Ali Baig's examination results and progress toward ACCA membership. It shows that he passed the UK Advanced Taxation paper in December 2014 with 60%. It also lists the results of all his previous ACCA papers, and indicates he has completed the exam requirement but still needs to pass the Ethics module and gain relevant work experience to fulfill the remaining membership requirements.
Engineers australia chartered status
This document provides information for applicants seeking Chartered Status with Engineers Australia. It outlines the pathways and requirements to achieve Chartered Status as a Chartered Professional Engineer (CPEng), Chartered Engineering Technologist (CEngT), or Chartered Engineering Officer (CEngO). Applicants must be eligible for Engineers Australia membership and have a minimum of 3 years of professional experience. Chartered Status can be obtained through submitting an Engineering Practice Report and participating in a professional interview, completing a Professional Development Program, following the Mature Experienced Engineers Pathway, or through mutual recognition of an international qualification. Maintaining Chartered Status requires 150 hours of continuing professional development every 3 years and being subject to audit every 5 years. The
City & Guilds Engineering Achievement Certificate
This certificate document recognizes that Stephen Moore attended Royal Air Force, No 1 Radio School, Locking. It certifies that he successfully completed eight components of the City and Guilds of London Institute program in Electrical and Electronic Engineering Competences, receiving distinctions in general maintenance technology, maintenance organisation, electronic components, and digital electronics. The certificate was awarded in January 1995 and signed by the Director-General of the City and Guilds of London Institute.
Pokemon GO explained - The Hook Model
Varför är Pokémon GO så beroendeframkallande? Kanske kan vi besvara den frågan med hjälp av "The Hook Model"
Academic Certs
This document certifies that Chan Ying Rui completed the requirements for a Bachelor of Engineering (Materials) degree from the University of Malaya with Pass with Honours (With Distinction). It also includes certificates confirming Chan Ying Rui studied abroad as an exchange student at National Cheng Kung University in Taiwan from 2013 to 2014 and received an award for the best group presentation in a Polymer Engineering course at the University of Malaya.
BSST Official Transcript Sean
- Sean Peter Robinson graduated from the University of Southern Queensland with an Associate Degree of Spatial Science with Distinction in 2012 and a Bachelor of Spatial Science Technology in 2015, majoring in Surveying.
- The transcript lists the courses taken between 2008-2015, the terms, units, grades and grade points for each course, with most grades in the Distinction or High Distinction range.
- Exemptions were granted for several courses when he commenced his Bachelor's degree based on prior study. His overall GPA for the Associate Degree was 6.19 and 4.83 for the Bachelor's degree.
Lancaster University - Transcript
This official transcript from the University of Lancaster documents the educational achievement and qualifications of Martin Andreev. It shows that he earned a Bachelor of Business Administration with Second Class Honours (Division One) in European Management in July 2014. Over the course of his studies from 2010 to 2014, he completed various course modules, receiving grades ranging from 58 to 21.8. The transcript provides a detailed record of all courses taken, credits earned, and grades received to validate his degree award.
ABE diploma
Myint Myat AungZaw has been awarded the ABE Level 6 Diploma in Business Management by the Association of Business Executives for successful completion of units in corporate strategy and planning, international business case study, managing in organisations, strategic human resource management, and strategic marketing management. The diploma was issued on February 26, 2016.
Industrial training report
This report contains concise details of in-plant training received at Colombo Dockyard PLC to fulfill the industrial training requirements of B.Sc. Eng. degree program at University of Moratuwa.
Bachelor's degree
This document is an academic transcript for Osama Farag Abdel Krim Gad from the University of Malaya. It summarizes his coursework and grades for a Bachelor of Engineering in Civil Engineering from 2008 to 2012. It shows that he fulfilled the requirements for the degree program and was awarded Pass with Honours. His areas of specialization included structures, geotechnical engineering, transportation, water resources and construction management.
Scan_Doc0015
Sole Smidt received the National Senior Certificate from Hoerskool John Vorster in Gauteng, South Africa. She achieved the following percentages in her subjects: Afrikaans 78%, English 81%, Mathematical Literacy 84%, Life Orientation 90%, Business Studies 74%, Engineering Graphics and Design 65%, and Tourism 88%. Sole qualified for a bachelor's degree, diploma or higher certificate as published in the Government Gazette for admission to higher education.
What's hot (20)
National Apprentice & Industrial Training Authority Report on Industrial Trai...
National Apprentice & Industrial Training Authority Report on Industrial Trai...
Transcript of Record(Undergrad and Masters Degree)
Transcript of Record(Undergrad and Masters Degree)
Viewers also liked
Trade Certificate.PDF
This document certifies that Rowyn Nott has completed the requirements for a Certificate III in Engineering - Fabrication Trade from the Australian Trade Training College. It lists the 22 individual units of competency Rowyn achieved, which cover skills in mechanical cutting, brazing, thermal cutting, fabrication, shaping, assembly, manual and advanced welding techniques using multiple processes, repairs, geometric development, technical drawing interpretation, measurements, computations, occupational health and safety, planning, quality systems, communication, on-the-job training, use of hand and power tools, and basic penetrant testing. The certificate was issued on February 15, 2013.
Curriculum Vitae GordonWager May 2015
Gordon Wager has over 40 years of experience as a welding inspector and welder. He received welding training and served a 5 year apprenticeship in welding. He has worked on numerous offshore oil and gas projects as a welding inspector, ensuring quality and compliance with welding standards. His current role is as a welding inspector for Atlantic Resources on the Total Laggan Tormore project in the Shetland Isles.
apprenticeship certificate
This certificate recognizes that James Gulwell successfully completed a Modern Apprenticeship program in Engineering Construction (Pipe Fitting). The program was developed by the Engineering Construction Industry Training Board and delivered by NASEC and Mitsui Babcock Energy Services with support from Tees Valley LSC. James Gulwell received the certificate on February 17, 2003.
Boilermaker Certificate
This trade certificate certifies that Tobias Williams La Grange, with identity document number 7904275044085, passed a trade test in the listed trade of Plater/Boilermaker (Organising Framework for Occupations code 651302: Boilermaker). The certificate was issued by the Quality Council for Trades and Occupations under the Skills Development Act of 1998 and bears the certificate number ZA 0052556, with the date of trade testing being 12/06/10 and date of issue as 2016-04-29.
Viewers also liked (16)
Certificate II in Process Plant Operations - Lee Cain
Certificate II in Process Plant Operations - Lee Cain
N2,N3,N4,N5,N6,Trade test,First aid level 1,ID book,Induction boilermaker
N2,N3,N4,N5,N6,Trade test,First aid level 1,ID book,Induction boilermaker
Certificate III in Engineering Mechanical Trade - Lee Cain
- 1. m*,,"tafesA This is to certify that Lee Cain has fi.rlfilled the requirements for the Certif,cate III Engineering - Mechanical Trade MEMg0298 Department of Further Edacation, Employrnent, Science and Tbchno logy 6 June 2OO8 -""?;l'fii'l'ff:" Achined through New Apprenticeship Arr angements Issued under the authority of the Tiaifig md Skills Dmlopment Act 2003 This Qralification is recognised within the Ausualim Qra.lifcation Fmryork ln ,t0161 National Tnining Prcvider Nmber z-t -t --t --, ---NATIoNALLY RJcocNrsED TRAINING