centrifugalclutch copy
•
0 likes•249 views
This document contains a parts list and technical drawings for a clutch assembly. The drawings include views of the assembly from different angles and enlargements of specific areas. Key components include an aluminum backplate, bearing connection, steel bolts and nuts, aluminum drum casing, connection to the motor, wood shoes, flanged bolts and nuts, aluminum shaft, bearing housings, bearings, connection plate, circlips, and tension spring. Dimensions are provided in millimeters and tolerances specified.
Report
Share
Report
Share
Download to read offline
Recommended
Planta de processamento do mineral ilmenite elaborado por ecton boa
This document provides a flowsheet for an ilmenite magnetic separation circuit. It lists various process equipment including conveyors, dryers, screens, magnets, heaters, and machines. It also provides flow directions and references between different pieces of equipment. The flowsheet aims to separate ilmenite into three product bins, with rejects sent to a collection conveyor. Equipment is identified by tags like CV5002 and DM5321-23. Flow rates and capacities are provided for some units.
Upright Cabinet temp logs (2)
This document provides temperature, pressure, and energy consumption data for an upright cabinet that was tested on 2/10/2013 at 15:00 hours. Key findings from the test include:
- The ambient air temperature around the cabinet was 27.9 degrees C
- Temperatures on various shelves in the cabinet ranged from -0.7 to 1.6 degrees C
- Refrigerant temperatures at various points in the system ranged from 4.8 to 38.5 degrees C
- Suction and discharge pressures in the system were 3.6 and 15.8 bar respectively
- The power used was 1.480 kW on average and 450 kWh total for 360 hours of operation
Prijsbook 2014@ 23
This document provides specifications for three models of glass doors. It lists the model numbers, sizes in millimeters, glass thickness in millimeters, and American Wire Gauge (AWG) for each model. Model CF5320 is for Aruba and is 900x1350x1980mm with 6mm clear chrome glass and 714 AWG. Model CF5340 is for Cuba and is 1000x1650x1930mm with 6mm clear chrome glass and 673 AWG.
082217294199 MENJUAL HAMMER TEST MATEST, KONDISI OK
MARGA SETIA
Jl.H Kelik No 20 RT03 /RW08 Kelurahan Kelapa Dua Kec Kebon Jeruk Jakarta Barat
Phone : 082112325856 Fax : 021-22054159
www.warungalatukur.tokopedia.com – www.margasetia.com – http://tantanteknik.blogspot.com
Cara Order Hubungi :
Asep Tantan
Phone /WA : 082217294199 PIN BB : D718F4A3
email : atantan.margasetia@gmail.com / tantanteknik@yahoo.com
Kami salah satu Toko Online di Jkarta menjual berbagai macam Alat Alat Ukur dan Survey, Alat Teknik Sipil, GPS, Alat Geologi, GPS, dan Sirine, Alat Lab
Produk yang ditawarkan :
Total Station. Waterpass. Theodolite Digital. Hammer test. Anemometer.Anggle Meter.Lux Meter. Sound Level. Kompas. Clinometer. Weather Station. GPS Geodetik. GPS Map. GPS Echosounder. Abney Level. Rain Gauge / Curah Hujan. Sirine. Levelling Laser. Fusion Splicer. Digipas. Laser Meter.Meteran. Waterpass Digital. Coating Thiknes. Thermometer. Thermo hygrometer. SIRINE.Kompas, Clinometer, Abney Level, Flowacth, Laser Range Finde,Fusion Splicer, Sand Cone test, DCP, Palu geologi, Loupe, Batre dan Charger, Tripod, Prisma Polygon, Single Prisma, mini Prisma, Bak Ukur, Range Pole, Kabel Data,DO meter, FLIR, Dll masih banyak lagi pokonya.
CS Unitec Nut Runners: 3 6242 0010
This document is a spare parts list for a CS Unitec hydraulic nut runner model 3 6242 0010 dated January 3rd. It lists 50 individual parts needed for the nut runner with their part numbers, descriptions, and manufacturers. The parts include hoses, valves, gears, bearings, housings and more.
Mcb bh dn-dienhathe.org
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
CMT
The document contains data and results from a finite element analysis case study involving two cases. MATLAB software was used to solve the cases. The summary includes:
1) Tables of node coordinate and element connectivity data are provided for Cases 1 and 2, along with the results of the finite element analysis showing displacements and stresses.
2) Questions are posed about how renumbering the nodes would affect the structural stiffness matrix and computational efficiency.
3) The algorithm used by the skyline function to calculate half bandwidths is described.
CAE
The document is an engineering student's report on their reverse engineering assignment to model a bottle using Creo software. They took measurements of the physical bottle using various methods and created a 3D model with a straight section, turning section, body, base, and design features. Rendering was applied to showcase the final digital model. The student concluded it was an insightful experience that improved their Creo skills and systems thinking.
Recommended
Planta de processamento do mineral ilmenite elaborado por ecton boa
This document provides a flowsheet for an ilmenite magnetic separation circuit. It lists various process equipment including conveyors, dryers, screens, magnets, heaters, and machines. It also provides flow directions and references between different pieces of equipment. The flowsheet aims to separate ilmenite into three product bins, with rejects sent to a collection conveyor. Equipment is identified by tags like CV5002 and DM5321-23. Flow rates and capacities are provided for some units.
Upright Cabinet temp logs (2)
This document provides temperature, pressure, and energy consumption data for an upright cabinet that was tested on 2/10/2013 at 15:00 hours. Key findings from the test include:
- The ambient air temperature around the cabinet was 27.9 degrees C
- Temperatures on various shelves in the cabinet ranged from -0.7 to 1.6 degrees C
- Refrigerant temperatures at various points in the system ranged from 4.8 to 38.5 degrees C
- Suction and discharge pressures in the system were 3.6 and 15.8 bar respectively
- The power used was 1.480 kW on average and 450 kWh total for 360 hours of operation
Prijsbook 2014@ 23
This document provides specifications for three models of glass doors. It lists the model numbers, sizes in millimeters, glass thickness in millimeters, and American Wire Gauge (AWG) for each model. Model CF5320 is for Aruba and is 900x1350x1980mm with 6mm clear chrome glass and 714 AWG. Model CF5340 is for Cuba and is 1000x1650x1930mm with 6mm clear chrome glass and 673 AWG.
082217294199 MENJUAL HAMMER TEST MATEST, KONDISI OK
MARGA SETIA
Jl.H Kelik No 20 RT03 /RW08 Kelurahan Kelapa Dua Kec Kebon Jeruk Jakarta Barat
Phone : 082112325856 Fax : 021-22054159
www.warungalatukur.tokopedia.com – www.margasetia.com – http://tantanteknik.blogspot.com
Cara Order Hubungi :
Asep Tantan
Phone /WA : 082217294199 PIN BB : D718F4A3
email : atantan.margasetia@gmail.com / tantanteknik@yahoo.com
Kami salah satu Toko Online di Jkarta menjual berbagai macam Alat Alat Ukur dan Survey, Alat Teknik Sipil, GPS, Alat Geologi, GPS, dan Sirine, Alat Lab
Produk yang ditawarkan :
Total Station. Waterpass. Theodolite Digital. Hammer test. Anemometer.Anggle Meter.Lux Meter. Sound Level. Kompas. Clinometer. Weather Station. GPS Geodetik. GPS Map. GPS Echosounder. Abney Level. Rain Gauge / Curah Hujan. Sirine. Levelling Laser. Fusion Splicer. Digipas. Laser Meter.Meteran. Waterpass Digital. Coating Thiknes. Thermometer. Thermo hygrometer. SIRINE.Kompas, Clinometer, Abney Level, Flowacth, Laser Range Finde,Fusion Splicer, Sand Cone test, DCP, Palu geologi, Loupe, Batre dan Charger, Tripod, Prisma Polygon, Single Prisma, mini Prisma, Bak Ukur, Range Pole, Kabel Data,DO meter, FLIR, Dll masih banyak lagi pokonya.
CS Unitec Nut Runners: 3 6242 0010
This document is a spare parts list for a CS Unitec hydraulic nut runner model 3 6242 0010 dated January 3rd. It lists 50 individual parts needed for the nut runner with their part numbers, descriptions, and manufacturers. The parts include hoses, valves, gears, bearings, housings and more.
Mcb bh dn-dienhathe.org
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
CMT
The document contains data and results from a finite element analysis case study involving two cases. MATLAB software was used to solve the cases. The summary includes:
1) Tables of node coordinate and element connectivity data are provided for Cases 1 and 2, along with the results of the finite element analysis showing displacements and stresses.
2) Questions are posed about how renumbering the nodes would affect the structural stiffness matrix and computational efficiency.
3) The algorithm used by the skyline function to calculate half bandwidths is described.
CAE
The document is an engineering student's report on their reverse engineering assignment to model a bottle using Creo software. They took measurements of the physical bottle using various methods and created a 3D model with a straight section, turning section, body, base, and design features. Rendering was applied to showcase the final digital model. The student concluded it was an insightful experience that improved their Creo skills and systems thinking.
Fdfg2 u (asdfgmbly) (1)
This document contains details and specifications for a 12'-6" universal folding frame with a stiff arm, including a list of 22 parts, their descriptions and quantities. It provides dimensions, tolerances, and notes that the design can accept mounting pipes to configure for 2, 3, or 4 antenna pipes. It also includes proprietary notes and contact information.
Vue éclatée 701 SuperMotard
This document contains a parts catalog for an Enduro Supermoto 2016 engine. It lists various engine parts across 14 pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, clutch, transmission main shaft, transmission counter shaft, and other systems. It provides part numbers, names, and quantities for each component. The document also contains legal disclaimers about product availability and specifications.
701 enduro 2016 moteur
This document contains a parts catalog for an Enduro Supermoto 2016 engine. It lists 44 parts by number, part name, and quantity. The parts include components of the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, clutch, transmission main shaft, counter shaft, and other systems such as valve drive, timing drive, and lubrication system. The document provides parts numbers to order replacement parts and indicates when parts are included in repair kits.
disel tank.PDF
This document contains a bill of materials and drawings for a metal fabrication project. It lists 14 items with descriptions and specifications including sheet metal, bolts, handles, and piping materials. Dimensioned technical drawings show views of the assembly with labeled parts, sections, and scales. The fabrication will be completed by Lalitha Metal Fabricators based on drawings approved by the customer.
Lcl users manual electrical drawings
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
Fe 250 2013 moteur
This document provides a parts list and descriptions for the transmission counter shaft of a 2013 FE 250 engine. It includes the part numbers and names for the counter shaft assembly and various gears, bearings, seals, and other components. Specifications like tooth counts and sizes are provided for the different gears.
Ellis Patents Atlas Cable Cleats
This document provides information on Atlas cable cleats for supporting trefoil and single cable applications. It describes the cleats' unique patented design which provides mechanical support and short circuit withstand capability. The cleats are made of galvanized or stainless steel and include integral pads to protect and cushion cables during short circuit conditions. Tables provide dimensions and weights for various cleat models to accommodate different cable diameters. Test results show the cleats meet the requirements of European standard BS EN 50368:2003 for properties like axial movement, flame resistance, electro-mechanical force resistance, and impact resistance.
1609416145351VDP revised_30-12-2020.pdf
This document contains contact information for various railway officials and an index of electrical and bogie items with their part numbers, descriptions, specifications and categories. It lists the name, designation and mobile number of 5 deputy chief electrical engineers. It then provides a table with 67 item codes, descriptions, drawings/specifications, categories and types related to electrical components. Another table lists 21 item codes, descriptions, specifications, categories and types related to bogie, superstructure and pneumatic systems.
trial Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and specifications are given for various models of the connector.
Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and part numbers for the connector and related tooling are also included.
701 2019 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 enduro 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 2018 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 2017 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering replacement parts for an engine.
701 2018 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed along with its part number, name, and quantity required. The document provides information on replacing or repairing parts for this engine.
701 enduro 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering replacement parts for an engine.
701 supermoto 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec Sheet
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec SheetThorne & Derrick International
Atlas cable cleats are designed to provide mechanical support and withstand short circuits for trefoil and single cable applications. They have a patented design that offers one bolt, two bolt, or framing channel fixing options. The cleats are manufactured from galvanized or stainless steel and include integral pads to protect cables during short circuits. They have passed various testing requirements for properties like axial movement, flame resistance, lateral load, and impact resistance according to the European standard for cable cleats.Daniel - Portfolio - Digital Copy
This document contains details for Daniel Lipinski including contact information and sketches of furniture designs. It includes exploded views and bills of materials for designs like the Cobra Stool and Tidal 29 Lounge as well as sketches of other furniture like the Custom Ute Tray and Metal Scrap Frames. Dimensions are provided for components.
VHIA - 071122.pdf
This document provides information on HTR's VHIA series of wire wound resistors. Key details include:
- The resistors have a flame retardant silicone coating and operate from 0.5W to 25W with tolerances as close as 1%.
- Dimensions, resistance ranges, weights, and packaging configurations are provided for each model.
- Electrical characteristics include voltage and power ratings, temperature coefficients, and pulse capability performance.
- Graphs illustrate temperature rise vs power and maximum pulse power vs pulse duration for various models.
More Related Content
Similar to centrifugalclutch copy
Fdfg2 u (asdfgmbly) (1)
This document contains details and specifications for a 12'-6" universal folding frame with a stiff arm, including a list of 22 parts, their descriptions and quantities. It provides dimensions, tolerances, and notes that the design can accept mounting pipes to configure for 2, 3, or 4 antenna pipes. It also includes proprietary notes and contact information.
Vue éclatée 701 SuperMotard
This document contains a parts catalog for an Enduro Supermoto 2016 engine. It lists various engine parts across 14 pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, clutch, transmission main shaft, transmission counter shaft, and other systems. It provides part numbers, names, and quantities for each component. The document also contains legal disclaimers about product availability and specifications.
701 enduro 2016 moteur
This document contains a parts catalog for an Enduro Supermoto 2016 engine. It lists 44 parts by number, part name, and quantity. The parts include components of the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, clutch, transmission main shaft, counter shaft, and other systems such as valve drive, timing drive, and lubrication system. The document provides parts numbers to order replacement parts and indicates when parts are included in repair kits.
disel tank.PDF
This document contains a bill of materials and drawings for a metal fabrication project. It lists 14 items with descriptions and specifications including sheet metal, bolts, handles, and piping materials. Dimensioned technical drawings show views of the assembly with labeled parts, sections, and scales. The fabrication will be completed by Lalitha Metal Fabricators based on drawings approved by the customer.
Lcl users manual electrical drawings
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
Fe 250 2013 moteur
This document provides a parts list and descriptions for the transmission counter shaft of a 2013 FE 250 engine. It includes the part numbers and names for the counter shaft assembly and various gears, bearings, seals, and other components. Specifications like tooth counts and sizes are provided for the different gears.
Ellis Patents Atlas Cable Cleats
This document provides information on Atlas cable cleats for supporting trefoil and single cable applications. It describes the cleats' unique patented design which provides mechanical support and short circuit withstand capability. The cleats are made of galvanized or stainless steel and include integral pads to protect and cushion cables during short circuit conditions. Tables provide dimensions and weights for various cleat models to accommodate different cable diameters. Test results show the cleats meet the requirements of European standard BS EN 50368:2003 for properties like axial movement, flame resistance, electro-mechanical force resistance, and impact resistance.
1609416145351VDP revised_30-12-2020.pdf
This document contains contact information for various railway officials and an index of electrical and bogie items with their part numbers, descriptions, specifications and categories. It lists the name, designation and mobile number of 5 deputy chief electrical engineers. It then provides a table with 67 item codes, descriptions, drawings/specifications, categories and types related to electrical components. Another table lists 21 item codes, descriptions, specifications, categories and types related to bogie, superstructure and pneumatic systems.
trial Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and specifications are given for various models of the connector.
Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and part numbers for the connector and related tooling are also included.
701 2019 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 enduro 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 2018 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
701 2017 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering replacement parts for an engine.
701 2018 moteur super mot
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed along with its part number, name, and quantity required. The document provides information on replacing or repairing parts for this engine.
701 enduro 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering replacement parts for an engine.
701 supermoto 2017 moteur
This document is a spare parts catalog for an engine. It lists various engine parts across multiple pages, including the engine case, clutch cover, balancer shaft, cylinder, crankshaft, piston, secondary air system, clutch, transmission main shaft, and transmission counter shaft. Each part is listed by position number, part number, name, and quantity. The document provides information on ordering spare parts for the engine.
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec Sheet
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec SheetThorne & Derrick International
Atlas cable cleats are designed to provide mechanical support and withstand short circuits for trefoil and single cable applications. They have a patented design that offers one bolt, two bolt, or framing channel fixing options. The cleats are manufactured from galvanized or stainless steel and include integral pads to protect cables during short circuits. They have passed various testing requirements for properties like axial movement, flame resistance, lateral load, and impact resistance according to the European standard for cable cleats.Daniel - Portfolio - Digital Copy
This document contains details for Daniel Lipinski including contact information and sketches of furniture designs. It includes exploded views and bills of materials for designs like the Cobra Stool and Tidal 29 Lounge as well as sketches of other furniture like the Custom Ute Tray and Metal Scrap Frames. Dimensions are provided for components.
VHIA - 071122.pdf
This document provides information on HTR's VHIA series of wire wound resistors. Key details include:
- The resistors have a flame retardant silicone coating and operate from 0.5W to 25W with tolerances as close as 1%.
- Dimensions, resistance ranges, weights, and packaging configurations are provided for each model.
- Electrical characteristics include voltage and power ratings, temperature coefficients, and pulse capability performance.
- Graphs illustrate temperature rise vs power and maximum pulse power vs pulse duration for various models.
Similar to centrifugalclutch copy (20)
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec Sheet
Ellis Patents AR2-A31 Atlas Trefoil Cable Cleat - 24-26mm - Spec Sheet
centrifugalclutch copy
- 1. UNLESS OTHERWISE STATED ALL DIMENSIONS IN MILLIMETRES MATERIAL FINISHDRAFTING STANDARD BS 8888 TOLERANCES: COURSE DO NOT SCALE E E FF SHEET 1 of 2SCALE 0.500 MM2DM2 VARIOUS DWG NO. FULLSIZE A3 CLUTCHISS. DATE: 17/11/2012 VARIOUSLINEAR: ±0.1 ANGULAR: ±0.5 REV: 1A DRN: JRW 06-Nov-12 QTYMATERIALDESCRIPTION DWG or PART NO. ITEM 1ALUMINIUMBACKPLATEP10011 1ALUMINIUMBEARINGCONNECTIONP10022 9STEELM4BOLTSHORTP10033 5STEELWASHERP10044 9STEELM4NUTP10055 1ALUMINIUMDRUMCASINGP10066 1ALUMINIUMCONNECTIONTOMOTORP10077 2WOODSHOEP10088 2STEELFLANGEDBOLTP10099 2STEELFLANGEDNUTP101010 1ALUMINIUMSHAFTP101111 2ALUMINIUMBEARINGHOUSINGP101212 2BEARINGASM0113 1ALUMINIUMCONNECTIONPLATEP101314 2STEELCIRCLIPP101415 1STEELTENSION SPRINGP101516 9 16 E-ESECTION 1 2 4 11 13 14 10 6 15 H7P6 12 3 5 7 F-FSECTION 8 SEE DETAIL A 1.500SCALE ADETAIL
- 2. UNLESS OTHERWISE STATED ALL DIMENSIONS IN MILLIMETRES MATERIAL FINISHDRAFTING STANDARD BS 8888 TOLERANCES: COURSE DO NOT SCALE AA SHEET 2 of 2SCALE 0.500 MM2DM2 VARIOUS DWG NO. FULLSIZE A3 ISS. DATE: VARIOUS LINEAR: ±0.1 ANGULAR: ±0.5 REV: 1A DRN: 17-Nov-12 1.000SCALE A-ASECTION SEE DETAIL B SEE DETAIL C 3.000SCALE BDETAIL 3.000SCALE CDETAIL