disel tank.PDF
•
0 likes•165 views
This document contains a bill of materials and drawings for a metal fabrication project. It lists 14 items with descriptions and specifications including sheet metal, bolts, handles, and piping materials. Dimensioned technical drawings show views of the assembly with labeled parts, sections, and scales. The fabrication will be completed by Lalitha Metal Fabricators based on drawings approved by the customer.
Report
Share
Report
Share
Download to read offline
Recommended
BigTable.PDF
This document contains technical drawings with dimensions and annotations. It includes details like part profiles, angles, numbers, labels, and notes. The drawings have information for manufacturing a part including dimensions, a scale, sheets for a drawing number, a weight, and notes about deburring corners.
Residence addition _ Structural plans and details
This document contains architectural and structural plans and details for a residential addition project. The ground floor/foundation plan shows column layouts labeled C1 through C4, beams labeled B1, and footings labeled F1 through F4. Additional details include a corner detail, roof deck section, skylight detail, wall section at roof deck entrance, and parapet cap detail. Dimensioned layouts and notes provide information on materials and construction assemblies.
TBookCaseAssem.PDF
This document appears to be a technical drawing or blueprint containing dimensions, part labels, and manufacturing notes for an assembly. Key information includes dimensions and labels for various parts, manufacturing notes to debur and break sharp edges, and contact information for a person named Yossi Gavai. The drawing number, scale, and title provide additional context that it is a technical drawing for a bookcase assembly.
20 finalised door schedule d9 d10 ready plot a1 titleblock landscape updated ...
This document contains technical drawings and specifications for two doors - a double lattice grill door and a double panel door. Details provided include dimensions, materials, finishes, hardware, and condition. The document contains scale drawings showing elevations, sections, plans, and an exploded isometric view of each door type.
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
This 3 page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 focal plane scope. It provides information on the different markings and their meanings in centimeters/100m, inches/100yd, and mrad at the lowest and highest magnifications. The data sheet also lists the scope model number, type, and other specifications.
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
This 3 page document is a data sheet from Schmidt & Bender GmbH & Co. KG providing information about a reticle for a 5-25x56 PMII/LP scope. It lists the manufacturer and contact information, includes disclaimers about copyright and permission, and provides technical specifications such as magnification levels, objective lens details, and measurement conversions for different units of angle, distance, and field of view.
Presentation PDM (MULTIPURPOSE KNIFE SHARPENER)
This document outlines a student project to design a multipurpose knife sharpener. It includes survey results which found that customers want the sharpener to be portable, affordable, long-lasting and eco-friendly. Several design concepts were developed and screened. The selected design features individual sharpening areas for different knives, a carrot cutter, and adjustable blade holder. Detailed drawings, manufacturing methods using injection molding and other processes, bill of materials, and cost analysis are provided.
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII-2/LP riflescope. It provides information on the scope model number, focal plane, type, and coverages in cm/100m, in/100yd, and mrad at various magnifications. The final section lists the field of view specifications at the lowest and highest magnifications.
Recommended
BigTable.PDF
This document contains technical drawings with dimensions and annotations. It includes details like part profiles, angles, numbers, labels, and notes. The drawings have information for manufacturing a part including dimensions, a scale, sheets for a drawing number, a weight, and notes about deburring corners.
Residence addition _ Structural plans and details
This document contains architectural and structural plans and details for a residential addition project. The ground floor/foundation plan shows column layouts labeled C1 through C4, beams labeled B1, and footings labeled F1 through F4. Additional details include a corner detail, roof deck section, skylight detail, wall section at roof deck entrance, and parapet cap detail. Dimensioned layouts and notes provide information on materials and construction assemblies.
TBookCaseAssem.PDF
This document appears to be a technical drawing or blueprint containing dimensions, part labels, and manufacturing notes for an assembly. Key information includes dimensions and labels for various parts, manufacturing notes to debur and break sharp edges, and contact information for a person named Yossi Gavai. The drawing number, scale, and title provide additional context that it is a technical drawing for a bookcase assembly.
20 finalised door schedule d9 d10 ready plot a1 titleblock landscape updated ...
This document contains technical drawings and specifications for two doors - a double lattice grill door and a double panel door. Details provided include dimensions, materials, finishes, hardware, and condition. The document contains scale drawings showing elevations, sections, plans, and an exploded isometric view of each door type.
Technical data SCHMIDT & BENDER MSR Riflescopes Reticles Subtensions | Optics...
This 3 page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 focal plane scope. It provides information on the different markings and their meanings in centimeters/100m, inches/100yd, and mrad at the lowest and highest magnifications. The data sheet also lists the scope model number, type, and other specifications.
Technical data SCHMIDT & BENDER P4L Fine Riflescopes Reticles Subtensions | O...
This 3 page document is a data sheet from Schmidt & Bender GmbH & Co. KG providing information about a reticle for a 5-25x56 PMII/LP scope. It lists the manufacturer and contact information, includes disclaimers about copyright and permission, and provides technical specifications such as magnification levels, objective lens details, and measurement conversions for different units of angle, distance, and field of view.
Presentation PDM (MULTIPURPOSE KNIFE SHARPENER)
This document outlines a student project to design a multipurpose knife sharpener. It includes survey results which found that customers want the sharpener to be portable, affordable, long-lasting and eco-friendly. Several design concepts were developed and screened. The selected design features individual sharpening areas for different knives, a carrot cutter, and adjustable blade holder. Detailed drawings, manufacturing methods using injection molding and other processes, bill of materials, and cost analysis are provided.
Technical data SCHMIDT & BENDER P4L Riflescopes Reticles Subtensions | Optics...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 PMII-2/LP riflescope. It provides information on the scope model number, focal plane, type, and coverages in cm/100m, in/100yd, and mrad at various magnifications. The final section lists the field of view specifications at the lowest and highest magnifications.
JECA -Tile Trim2
This document appears to be a catalog listing various tile trim products available from a company. It includes the product names, codes, available colors and thickness options for several different types of stainless steel tile trim pieces. Details are provided for over a dozen distinct trim items.
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for their 5-25x56 PM II riflescope. It provides information on the different units of measurement for the reticle including centimeters/100m, inches/100yd, and mrad. It also lists the units A through J on the reticle and specifies the field of view at the lowest and highest magnifications.
Entity Occurrence Diagrams
The document discusses entity occurrence diagrams and how they are used to determine the cardinality between entities. It provides examples of a car hire entity occurrence diagram and a capital cities entity occurrence diagram. The car hire diagram shows a one-to-many relationship between bookings and customers, as one customer can have multiple bookings but each booking is for only one customer. The capital cities diagram shows a one-to-one relationship between countries and their capital cities, as each country has one capital city and each capital city is only associated with one country.
Miata water outlet adaptor and o ring groove detail
The document is an engineering drawing detailing an o-ring groove. It includes dimensions for the groove geometry including depths, widths, and radii. The drawing also specifies the material as aluminum and provides title block information like the part name, scale, and document number.
Hexagon buffers
GMT RUBBER-METAL-TECHNIC LTD provides hexagon buffers in various sizes and styles to meet customers' requirements. The document lists technical specifications such as dimensions, part numbers, and thread sizes for a number of hexagon buffer models. Customers can contact GMT for sales or visit their website for more information.
Case 1
The document contains bills of materials (BOMs) and process routings for a cookie company. The BOM details all components that make up the final assembly, their costs, and suppliers. The process routing outlines the production steps, work centers used, setup and run times. A cost roll up is provided for the BOM and process routing, showing the total cost per batch is $2.24. The document also lists various overhead costs and potential cost reduction opportunities for the cookie company to consider.
BLK WOLF.PDF
This document is an engineering drawing for an aluminum alloy rim for a BMW 320i. It includes dimensions for a 120mm diameter pitch with M14 x 1.25 bolts and loose counterbores. It also notes the material, scale, and other production details.
0215017_03r0_M_CUST
This document contains technical drawings and specifications for a 6-cylinder nitrogen rack with regulating manifold. It includes front, side, top, rear and section views of the rack at 1:15 scale as well as close-up views of individual items at scales ranging from 1:5 to 1:20. A parts list specifies 41 items by size, description and quantity. Dimensioned views provide measurements for the rack components.
shed-mitu2.PDF
The document appears to be an engineering drawing from Lalitha Metal Fabricators containing details for manufacturing. It includes two views labeled Detail A and Detail B at scales of 1:3. It specifies materials, dimensions, and quantities of rectangular, square, and circular sections, as well as clamp plates and wall mounting brackets. Notes provide tolerances, state that the drawing is proprietary, and specify the software and contact information for the fabricator.
total assembly.PDF
The document contains engineering drawings for a weight machine roller type. It includes details for a roller assembly with bearings, safety guards, and a removable loading platform. Dimensions and tolerances are provided for components like an MDF board base, pipe roller shaft, and collection bin. The drawings were created by Lalitha Metal Fabricators for a customer design.
Assem2_FINAL.PDF
The document contains engineering drawings and specifications for 14 metal parts with part numbers LB001 through LB014. It includes dimensions, materials, quantities and supplier information for a metal fabrication project for Lalitha Metal Fabricators. Engineering drawings show views and dimensions for the individual parts and their assembly.
Assem1- 2D DWG.PDF
This document is a technical drawing from Lalitha Metal Fabricators located in Gummidipoondi, India. It includes details such as dimensions, materials, and tolerances for box and angle sections, as well as notes that it is the sole property of Lalitha Metal Fabricators and any reproduction without permission could result in legal action. The drawing number, description, and contact information for the customer are also provided.
JB 11 M
This document contains:
1) An exploded view and assembly view of a Volume Control Damper with labeled parts and materials.
2) A parts list containing 27 parts with reference numbers, part numbers, descriptions, materials, and dimensions.
3) Views and brief product information identifying the product as a JB11-M Volume Control Damper.
IC3D example dwgs
This document contains a bill of materials for steel components of a stair assembly. It lists various steel pieces including channels, plates, and sheets along with their quantities, descriptions, lengths, weights, and material. It also contains fabrication notes instructing the shop to grind smooth all exposed welds and edges.
BUSTUBE JIG DESIGN SHEET 1
This document contains drawings and details for a bustube jig design. It includes a front view, plan view, and isometric view at the top. Below are enlarged details of the connection plate, A-frame connection, and connection plate. Dimensioned drawings then show the general arrangement and assembly details of jig frames 1, 2, and 3. Notes provide information on materials, welding specifications, painting, and assembly. Reference drawings are listed for individual components.
Physical inventory count sheet
This physical inventory count sheet documents inventory for a company. It lists 101 inventory items along with their item numbers, descriptions, purchase prices, quantities on hand, and locations. The sheet was performed on an unspecified date and signed by an individual.
big tone pipe support design
The document is an engineering drawing listing the parts, quantities, and specifications for a large pipe support. It includes 7 numbered items with part numbers, descriptions, and quantities. The drawing shows the pipe support from two angles at a scale of 1:5 over two sheets, specifying dimensions in millimeters and tolerances. It was designed by Design Hub.
45 in beam mAIN ASSEM 05-05-2015
This document contains drawings and part lists for assembling 45-inch Florida I-beams. It includes front, end, and isometric views of 10-foot and 20-foot beam sections showing the placement of steel plates, channels, and other parts. A parts list details 22 items by part number, mass, material, and description needed to construct the beams. Connection details are also provided to illustrate how the various parts connect together.
Tank Crawler Inspection Device
The document contains a parts list and assembly drawings for a tank crawler robot with 14 total parts. The main assemblies include the drive wheel assembly with 6 parts, rear caster assembly with 7 parts, strain relief assembly with 3 parts, and transducer solenoid assembly with 5 parts. The complete tank crawler final assembly integrates these sub-assemblies and other individual parts.
More Related Content
What's hot
JECA -Tile Trim2
This document appears to be a catalog listing various tile trim products available from a company. It includes the product names, codes, available colors and thickness options for several different types of stainless steel tile trim pieces. Details are provided for over a dozen distinct trim items.
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
This 3-page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for their 5-25x56 PM II riflescope. It provides information on the different units of measurement for the reticle including centimeters/100m, inches/100yd, and mrad. It also lists the units A through J on the reticle and specifies the field of view at the lowest and highest magnifications.
Entity Occurrence Diagrams
The document discusses entity occurrence diagrams and how they are used to determine the cardinality between entities. It provides examples of a car hire entity occurrence diagram and a capital cities entity occurrence diagram. The car hire diagram shows a one-to-many relationship between bookings and customers, as one customer can have multiple bookings but each booking is for only one customer. The capital cities diagram shows a one-to-one relationship between countries and their capital cities, as each country has one capital city and each capital city is only associated with one country.
Miata water outlet adaptor and o ring groove detail
The document is an engineering drawing detailing an o-ring groove. It includes dimensions for the groove geometry including depths, widths, and radii. The drawing also specifies the material as aluminum and provides title block information like the part name, scale, and document number.
Hexagon buffers
GMT RUBBER-METAL-TECHNIC LTD provides hexagon buffers in various sizes and styles to meet customers' requirements. The document lists technical specifications such as dimensions, part numbers, and thread sizes for a number of hexagon buffer models. Customers can contact GMT for sales or visit their website for more information.
Case 1
The document contains bills of materials (BOMs) and process routings for a cookie company. The BOM details all components that make up the final assembly, their costs, and suppliers. The process routing outlines the production steps, work centers used, setup and run times. A cost roll up is provided for the BOM and process routing, showing the total cost per batch is $2.24. The document also lists various overhead costs and potential cost reduction opportunities for the cookie company to consider.
BLK WOLF.PDF
This document is an engineering drawing for an aluminum alloy rim for a BMW 320i. It includes dimensions for a 120mm diameter pitch with M14 x 1.25 bolts and loose counterbores. It also notes the material, scale, and other production details.
0215017_03r0_M_CUST
This document contains technical drawings and specifications for a 6-cylinder nitrogen rack with regulating manifold. It includes front, side, top, rear and section views of the rack at 1:15 scale as well as close-up views of individual items at scales ranging from 1:5 to 1:20. A parts list specifies 41 items by size, description and quantity. Dimensioned views provide measurements for the rack components.
What's hot (8)
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
Technical data SCHMIDT & BENDER H2CMR Riflescopes Reticles Subtensions | Opti...
Miata water outlet adaptor and o ring groove detail
Miata water outlet adaptor and o ring groove detail
Viewers also liked
shed-mitu2.PDF
The document appears to be an engineering drawing from Lalitha Metal Fabricators containing details for manufacturing. It includes two views labeled Detail A and Detail B at scales of 1:3. It specifies materials, dimensions, and quantities of rectangular, square, and circular sections, as well as clamp plates and wall mounting brackets. Notes provide tolerances, state that the drawing is proprietary, and specify the software and contact information for the fabricator.
total assembly.PDF
The document contains engineering drawings for a weight machine roller type. It includes details for a roller assembly with bearings, safety guards, and a removable loading platform. Dimensions and tolerances are provided for components like an MDF board base, pipe roller shaft, and collection bin. The drawings were created by Lalitha Metal Fabricators for a customer design.
Assem2_FINAL.PDF
The document contains engineering drawings and specifications for 14 metal parts with part numbers LB001 through LB014. It includes dimensions, materials, quantities and supplier information for a metal fabrication project for Lalitha Metal Fabricators. Engineering drawings show views and dimensions for the individual parts and their assembly.
Assem1- 2D DWG.PDF
This document is a technical drawing from Lalitha Metal Fabricators located in Gummidipoondi, India. It includes details such as dimensions, materials, and tolerances for box and angle sections, as well as notes that it is the sole property of Lalitha Metal Fabricators and any reproduction without permission could result in legal action. The drawing number, description, and contact information for the customer are also provided.
Viewers also liked (7)
Similar to disel tank.PDF
JB 11 M
This document contains:
1) An exploded view and assembly view of a Volume Control Damper with labeled parts and materials.
2) A parts list containing 27 parts with reference numbers, part numbers, descriptions, materials, and dimensions.
3) Views and brief product information identifying the product as a JB11-M Volume Control Damper.
IC3D example dwgs
This document contains a bill of materials for steel components of a stair assembly. It lists various steel pieces including channels, plates, and sheets along with their quantities, descriptions, lengths, weights, and material. It also contains fabrication notes instructing the shop to grind smooth all exposed welds and edges.
BUSTUBE JIG DESIGN SHEET 1
This document contains drawings and details for a bustube jig design. It includes a front view, plan view, and isometric view at the top. Below are enlarged details of the connection plate, A-frame connection, and connection plate. Dimensioned drawings then show the general arrangement and assembly details of jig frames 1, 2, and 3. Notes provide information on materials, welding specifications, painting, and assembly. Reference drawings are listed for individual components.
Physical inventory count sheet
This physical inventory count sheet documents inventory for a company. It lists 101 inventory items along with their item numbers, descriptions, purchase prices, quantities on hand, and locations. The sheet was performed on an unspecified date and signed by an individual.
big tone pipe support design
The document is an engineering drawing listing the parts, quantities, and specifications for a large pipe support. It includes 7 numbered items with part numbers, descriptions, and quantities. The drawing shows the pipe support from two angles at a scale of 1:5 over two sheets, specifying dimensions in millimeters and tolerances. It was designed by Design Hub.
45 in beam mAIN ASSEM 05-05-2015
This document contains drawings and part lists for assembling 45-inch Florida I-beams. It includes front, end, and isometric views of 10-foot and 20-foot beam sections showing the placement of steel plates, channels, and other parts. A parts list details 22 items by part number, mass, material, and description needed to construct the beams. Connection details are also provided to illustrate how the various parts connect together.
Tank Crawler Inspection Device
The document contains a parts list and assembly drawings for a tank crawler robot with 14 total parts. The main assemblies include the drive wheel assembly with 6 parts, rear caster assembly with 7 parts, strain relief assembly with 3 parts, and transducer solenoid assembly with 5 parts. The complete tank crawler final assembly integrates these sub-assemblies and other individual parts.
Full Assembly.PDF
This document contains a parts list and assembly drawing for a Bluetooth device. It lists 16 parts with descriptions, materials, and quantities. The parts include a body, front, chip, locks, splits, buttons, string bar, circuit board, Bluetooth receiver, button board, screws, bottom locks, battery holder, and screws. Dimensions are in millimeters and tolerances range from 0.5 to 0.007 mm depending on number of decimal places.
Double bolt pipe clamp
Double Bolted Clamp pipe Design-Drawing
this video helpfull for pipe Designers . in this drawing we was trying to show different types of pipe support Design Procedure using Solidwork
Angle Head Drawing-3-23-16
This document contains engineering drawings for the design of a right angle head for a milling machine. It includes detailed drawings showing the exploded view of the assembly, individual part drawings with tolerances and notes, a parts list with materials, vendors and quantities. Dimensioned section views and tolerance information are provided to fully specify the geometry of the components.
Punch_Die_Drawing1-8
The document contains a parts list and drawings for a punch die assembly. It includes 16 items in the parts list with details like part numbers, descriptions, materials. The drawings show details of the individual parts and their dimensions, including the upper and lower die, die plate, die punch, guide posts and other components. Tolerances and notes are provided. The assembly is made of materials like steel, cast steel and aluminum.
Daniel - Portfolio - Digital Copy
This document contains details for Daniel Lipinski including contact information and sketches of furniture designs. It includes exploded views and bills of materials for designs like the Cobra Stool and Tidal 29 Lounge as well as sketches of other furniture like the Custom Ute Tray and Metal Scrap Frames. Dimensions are provided for components.
EJECTOR-ASSEMBLY.PDF
The document includes an exploded view diagram, bill of materials table, and multiple engineering drawings for an ejector assembly. The exploded view shows the 17 individual parts that make up the assembly and their positioning. The bill of materials lists each of the 17 parts with information like item number, part number, description, material, and quantity. The engineering drawings provide additional views and specifications for several of the individual parts that make up the ejector assembly.
LDavis_work_examples
This document contains work examples and specifications for manufacturing turbine blades and related components out of nickel alloys like Inconel. It includes summaries of 4 product launches for OEM manufacturing of turbine blades and compressor discs and 1 for component repair. It also provides details on the materials, number of operations, and specifications for components like dimensions, tolerances and surface finishes. Engineering drawings with additional details are referenced.
Southland colonial pedestrianoverpass_tre0003-g_11x17plans
This document contains plans and specifications for an Orlando urban trail project. It includes 8 pages of typical roadway sections, details for the trail pavement and sidewalk designs, and notes on clearing, grubbing, and other construction elements. It also includes a plan and elevation view of a bridge section showing piers and dimensions. The plans were prepared for the City of Orlando Public Works Department by Horizon Engineering Group, Inc.
My Design Projects_2
The document contains several technical drawings of mechanical parts with dimensions. The drawings include views and details of parts like dust bins, doors, rollers, shafts, racks, shelves and covers. Dimensioning and tolerances are provided in inches and millimeters. The drawings appear to be for manufacturing various components of a mechanical assembly.
Shredder Assembly.PDF
This document contains design drawings and specifications for a shredder. It includes a bill of materials listing the parts, materials, and quantities. Dimensioned technical drawings show the shredder from multiple views and angles. Key specifications are the gear ratio of 1:173 and that the housing and several internal components are made of ABS plastic, while the shafts and gears are stainless steel.
EAST SITRA VILLAGE 2 FOUL NETWORK
This document contains plans and drawings for a proposed foul sewer system for a social housing project in East Sitra, Bahrain. It includes 4 sheets showing layout plans of the proposed sewer pipelines and manholes for Village 2. The plans indicate how the system will connect to existing deep gravity sewers and provide design details such as pipe material specifications. Accompanying notes provide information on related drawings, standards, and design/installation requirements.
final presentation.pdf
The document contains architectural drawings for a proposed dance institute including site plan, floor plans, sections, elevations, schedules and details. The site plan shows the layout of the building and surrounding areas. Floor plans provide layouts and dimensions for the ground floor, first floor and terrace levels. Sections and elevations showcase building features. Accompanying schedules specify door, window and material details. Electrical, landscape and material plans are also included.
Drawings of Revit project for D type qtr.
The document contains construction plans and details for proposed Type D and Type C housing blocks and an officers' club building at Orient Area. It includes layout plans, section details, foundation details, beam and roof details, and reinforcement details. Dimensions and specifications are provided for structural elements including walls, columns, beams, slabs, and staircases.
Similar to disel tank.PDF (20)
Southland colonial pedestrianoverpass_tre0003-g_11x17plans
Southland colonial pedestrianoverpass_tre0003-g_11x17plans
disel tank.PDF
- 1. 7 9 3 1 2 10 13 8 4 5 11 6 11 12 14 ITEM NO. PART NAME DESCRIPTION MATERIAL SIZE QTY. 1 Base plate SHEET SS 500X300X6MM 1 2 Side sheet SHEET SS 300X400X6MM 2 3 Front sheet SHEET SS 506X400X6mm 2 4 Frame top 'L 'ANGLE SS 40X40X4MMX 1.4MTRLONG 1 5 Top cover SHEET SS 512X312X6mm 1 6 LEVEL INDICATOR ACYRALIC TUBE 1/2"X 250MMLG 2 7 FUEL CAP BREETHER WITH CAP 1 8 B18.6.7M - M10 x 1.5 x 40 BOLT&NUT GR 8.9 16 9 Handle ROD SS 10X300mm LG 1 10 Base Frame Channel C-CHANNEL SS 260X300X6mm THK SHEET 2 11 COUPPLING NIPPLE SS 1/2" 4 12 LEVEL INDICATOR ALARAM 1 13 L BEND LBOW PVC 1/2" 4 14 COUPLING PVC 4 SCALE : NTS DRAWING NO: DESCRIPTION: CUSTOMER DRAWING NO: NAME SIGN SNO LALITHA METAL FABRICATORS No: 32Sidco Industrial Estate,Gummidipoondi Email : lalithametal@rediffmail.com Ph:7871355885 SHEET NO: DESIGN DRAWN CHECK BY APPROVED BY MATERIAL: AS NOTED DATE REVISION DETAILS REV NO CHK SIGNDATENAME THIS DRAWING IS THE SOLE PROPERTY OF NAVEENA PROPERTIES &BUILDERS ANY ONE REPRODUCED OR HANDOVER TO ANOTHER PARTY FOR MANUFACTURING WILL BE LIABLE TO BE ACTION CAD Software: Solidworks M.RK DONOT TO SCLAE THE DWG IF ITS DOUGHT PLEASE ASK REV NO : TOTAL WEIGHT : PAINT DETAIL: M.RK UNLESS OTHERWIE SPECIFIED UNIT TO BE INCHES (OR)M(OR)CM (OR) MM GENERAL TOLERANCE 0 - 30 0.2 30 - 120 0.3 120 - 315 0.5 315 - 1000 0.8 1000 -2000 1.2 2000 - 4000 2.0 4000 & UP 3.0 ANGLE 0.2 SIVA.K SIVA.K L L M F F
- 2. 462 512 406 59 100 312 195 A A 512 312 65 82 72 SECTION A-A SCALE 1 : 5 DETAIL B SCALE 2 : 5 SCALE : NTS DRAWING NO: DESCRIPTION: CUSTOMER DRAWING NO: NAME SIGN SNO LALITHA METAL FABRICATORS No: 32Sidco Industrial Estate,Gummidipoondi Email : lalithametal@rediffmail.com Ph:7871355885 SHEET NO: DESIGN DRAWN CHECK BY APPROVED BY MATERIAL: AS NOTED DATE REVISION DETAILS REV NO CHK SIGNDATENAME THIS DRAWING IS THE SOLE PROPERTY OF NAVEENA PROPERTIES &BUILDERS ANY ONE REPRODUCED OR HANDOVER TO ANOTHER PARTY FOR MANUFACTURING WILL BE LIABLE TO BE ACTION CAD Software: Solidworks M.RK DONOT TO SCLAE THE DWG IF ITS DOUGHT PLEASE ASK REV NO : TOTAL WEIGHT : PAINT DETAIL: M.RK UNLESS OTHERWIE SPECIFIED UNIT TO BE INCHES (OR)M(OR)CM (OR) MM GENERAL TOLERANCE 0 - 30 0.2 30 - 120 0.3 120 - 315 0.5 315 - 1000 0.8 1000 -2000 1.2 2000 - 4000 2.0 4000 & UP 3.0 ANGLE 0.2 SIVA.K SIVA.K L L M F F