The document discusses CEL's range of products for zebra crossings and center islands, including their AVG-3 anti-vandal gallery and CELstar2 LED unit. The AVG-3 gallery has a tough, sealed design that makes it difficult for vandals to remove the globe. The CELstar2 LED unit provides energy savings through an automatic dimming light sensor. The document provides information on these products, their specifications, accessories, and ordering options.

1. www.charlesendirect.com
CEL | Belisha | AVG Gallery | CELstar™ LED Unit
CEL Belisha brochure 4pp.indd 1 24/11/2010 23:01
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk

2. | 2 |
INTRODUCTION
CEL manufactures a range of low maintenance, anti-vandal and energy efficient equipment for
Zebra Crossings and Centre Islands. The very popular AVG-3 is the modern version of the familiar
Belisha Beacon Gallery. This carries a range of amber and opal globes including Hi-Glow options
plus other accessories, meeting the latest regulations.
The AVG-3 and the CELstar2™ LED unit make perfect partners; together they form the ideal
solution for Belisha Beacon and Centre Island installation.
The UMSUG coded LED unit’s energy saving features offer a reduction in
carbon emissions.
The units can be ordered as a package comprising the AVG-3 Gallery,
CELstar™2 LED unit, ES lampholder and globe, at a reduced price.
A full range of accessories for the AVG is available.
CEL Belisha brochure 4pp.indd 2 24/11/2010 23:01

3. |3 |
Anti-Vandal Gallery AVG-3
The obvious choice for either Belisha or Centre Island applications,
the gallery’s two main components, collar and base, are of
die-cast solid aluminium. Perfectly keyed together, collar and base
are securely joined by two hidden allen screws forming a really tough
integral unit. The unique CEL neoprene seal (to IP54) between collar
and base, protects internal components.
When assembled it is virtually impossible for vandals to remove the
globe, reducing maintenance costs.
Black is the standard finish - also available in grey.
The advantages for you
Manufactured for Quality:
3 Strong, simple two part unit
3 Sealed to IP54 - increased lamp life
Anti-Vandal Features:
3 Virtually impossible to remove globe
3 Secured by hidden allen screws
Ease of Installation:
3 Quick to assemble and dismantle
3 Accepts any lampholder, Belisha Globe or Centre Island
3 Pre-drilled to accept floodlight, courtesy shield or PECU
3 Can be supplied pre-wired
AVG-3 Internal Fixings
Unlike conventional Belisha galleries, all fixing points to shaft are completely
hidden from the public. Three easily accessed globe ring captive security screws
are cleverly hidden to minimise vandalism while remaining easy to maintain.
AVG-3 fits all
76mm shafts
Hidden fixing
points - collar
to base
Hidden fixing points
- collar to base
Hidden fixing points
- base to column
Optional fixing for
photocell sensor
Optional photocell
sensor controller
Fixing points for
floodlight or shield
Position for lamp
and lampholder
BC or ES
Inset neoprene
rubber seal
Gallery has two main parts -
Base and Collar
AVG-3 - simple two part construction for strength,
economy and longer life
CEL Belisha brochure 4pp.indd 3 24/11/2010 23:01

4. | 4 |
CELstar2™
CEL have developed the intelligent, brighter yet energy efficient
CELstar2™ LED Unit which gives a reduced carbon footprint and a
rapid return on investment. The built-in light sensor automatically
dims during darkness giving further energy savings.
The advantages for you
Manufactured for Quality:
3 Thermally managed for LED longevity
3 Designed running hours >50,000
3 Integral light sensor, automatic dimming
Ease of Installation:
3 One model for flashing and non-flashing
3 UMSUG Code 79 50 018 000 100
3 ES fitting fits directly into standard lampholder
3 24 volt version available
3 Easy to synchronise flashing with other CELstar2™ beacons
Designed to comply with BS8442 (2006): pt 13
Technical Information
Power supply voltage 115-230V 50-60Hz
Power consumption - flashing
16.9W (Daytime)
9.8W (Night Dimming)
Power consumption - non-flashing
28W (Daytime)
16.4W (Night Dimming)
Flashing frequency 40 per minute @ 50Hz supply
Light sensor
Night Mode <35 lux
Day Mode >70 lux
Start-up delay 5 seconds
CEL Belisha brochure 4pp.indd 4 24/11/2010 23:01

5. | 5 |
Accessories
GLOBES
A selection of 300mm globes are available in amber or opal
manufactured in one piece from tough Polyethylene providing high
durability.
HI-GLOW BEACON
Developed to provide a higher visibility solution, the Hi-Glow Beacon
is available in amber and opal options. It is manufactured in one
piece from Polyethylene. Colour pigments and compounds used
provide a high level of luminescence for daytime and night-time
visibility even in poor weather conditions.
LAMPHOLDERS
Anti-vibration ES Lampholder
Fits into AVG-3 Gallery and will accept CELstar2™ LED unit.
Anti-vibration BC Lampholder
Fits into AVG-3 Gallery and will accept lamps with bayonet fitting.
PHOTOCELL (mini 2 part)
A remote detector photocell with accuracy, reliability and low power
consumption, used to control floodlight and/or Centre Island. Fits
into AVG/P (Gallery drilled for PECU).
4000
3000
2000
1000
0
1
Hi-Glow Beacon Amber
Hi-Glow Beacon Opal
Sensor Positions
1. 4” side low 2. 4” side high 3. 4” Top
4. Side low 5. Side High 6. Top
Visibeacon
Polyethylene Standard
SENSOR POSITION
LUX
2 3 4 5 6
Light Output
The graph below shows the lux output, measured at various positions, from a
Polyethylene globe, a Visibeacon and a Hi-Glow Beacon. The light source was
a 60W tungsten filament lamp.
CEL Belisha brochure 4pp.indd 5 24/11/2010 23:01

6. | 6 |
Accessories (continued)
FLOODLIGHT
300w tungsten halogen floodlight can be fitted to the AVG-3 using
pre-drilled fixing points, to provide illumination to crossings. Normally
controlled by photocell.
COURTESY SHIELD
Our standard shield is 400mm wide and is simply and firmly secured
using standard fixing points on the AVG-3.
LUMISPHERE®
Electronic Conservation Unit fits directly into the AVG-3 in place of a
traditional lampholder.
A 50w tungsten halogen lamp (luminous flux of 850 lm) provides
high visibility.
FAV-3 Flashing Unit for Belisha Beacon.
NFAV/4 Non-Flashing Unit for Centre Island.
OUTREACH BRACKET
CEL manufacture bracket arms to clamp onto 76mm pole complete
with 76mm spigot to accept the AVG-3. Available in galvanised finish
or painted Black or Grey.
For further information please contact
our Customer Services Team
CEL Belisha brochure 4pp.indd 6 24/11/2010 23:01

7. | 7 |
Ordering Information
ENERGY SAVING PACKAGE
Gallery and CELstar2™, together with a lampholder and
globe are offered as a money saving package.
For Belisha Crossing
AVG-3, CELstar2™ LED Unit, Amber Globe, ES Lampholder
Ref: AVG/F200
For Centre Island
AVG-3, CELstar2™ LED Unit, Opal Globe, ES Lampholder
Ref: AVG/N200 (If grey gallery required - AVG/Grey/N200).
PART NO. CEL REF DESCRIPTION
CEB1000 AVG-3 Gallery
CEB1001 AVG-3/Grey Gallery painted grey
CEB1002 AVG-3/P Gallery drilled for photocell
CEB1105 CELstar2™ LED Unit
CEB2000 AVG/F200 AVG/CELstar2/Amber Globe/ES Lampholder Package
CEB2002 AVG/N200 AVG/CELstar2/Opal Globe/ES Lampholder Package
CEB1200 Globe - Amber Standard 300mm Amber Globe
CEB1210 Globe - Opal Standard 300mm Opal Globe
CEB1220 Hi-Glow Amber Hi-visibility 300mm Amber Globe
CEB1230 Hi-Glow Opal Hi-visibility 300mm Opal Globe
CEB1170 ES Lampholder Edison Screw Lampholder
CEB1180 BC Lampholder Bayonet Cap Lampholder
CEB1300 CS400 Courtesy Shield
CEB1400 AVG PECU Miniature 2 part photocell to fit AVG-3
CEB1530 FL300 300w Tungsten Halogen Floodlight
CEB1120 FAV3 Lumisphere®
Flashing Unit
CEB1130 NFAV4 Lumisphere®
Constant Light Unit
CEM10 CO76/300 Outreach Bracket (300mm offset) for 76mm post
CEM16 CP76/300/Black As above painted black
ORDERING REFERENCES
CEL Belisha brochure 4pp.indd 7 24/11/2010 23:01

8. Charles Endirect Ltd operates a policy of continuous product development and improvement.
The facts and information offered in this document are correct at the time of going to press.
©2010 Charles Endirect Ltd
Charles Endirect Ltd is a market
leader in the street lighting industry.
The company’s innovative product
range includes:
ISOLATORS & CUT-OUTS
LSI Range
Festive Lighting
Helix Range
Extension Boxes & Gland Plates
FEEDER & DISTRIBUTION PILLARS
Mini Pillars
Midi Pillars
Maxi Pillars
Stainless Steel Pillars
Specialised Architectural Pillars
Pre-wired Distribution
BELISHA EQUIPMENT
Gallery
Light Sources
Globes
Accessories
ENERGY SAVING
Power Switches
Gear Trays
Electronic Ballasts
Control Gear
Energy Management System
LEDs
EARTHING
Cable Glands
CETs
Accessories
MISCELLANEOUS
Passive Safety
Fuses
Surge Protection
Emergency Doors
Strimmex
4090
CEL Belisha brochure 4pp.indd 8 24/11/2010 23:01
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk