Ce marking
•Download as PPTX, PDF•
0 likes•114 views
CDG Certification Ltd. provides CE marking certification services to help manufacturers comply with European product safety regulations and directives to affix the CE marking to products being placed on the European market. The CE marking certifies that a product has been assessed and meets EU requirements for safety, health, and the environment, allowing access to 27 countries with nearly 500 million people. Their experts can guide manufacturers through the correct procedures for CE marking and certification so a valid CE approval is obtained.
Report
Share
Report
Share
Recommended
Esclab 2016
ESCLAB is an Algerian scientific equipment company founded in 2004 that works with over 20 global partners. It has offices in Béjaïa, Algiers, Oran, and Annaba, with plans to expand. ESCLAB's staff has grown from 15 employees in 2004 to over 28 currently. The company focuses on sales, maintenance, calibration, and validation of laboratory equipment. It has four divisions - analytical, measurement, electrochemistry, and laboratory. ESCLAB's annual turnover, which does not include indirect sales, has increased from millions of euros initially to millions currently. It serves customers across various sectors including universities, research institutions, oil and gas companies, pharmaceutical companies, and more.
D&C June Ingress article
GAMBICA has represented UK industry in over 100 standards committees to influence European and international standards. A new group called Ingress was formed by 16 European industry associations including GAMBICA's partners Orgalime, CAPIEL and CEMEP. Ingress aims to inform European policymakers about industry's interests and priorities for using harmonized standards to demonstrate compliance with EU legislation. The group wants industry to be formally included as observers in the regulatory Committee on Standards which makes decisions impacting European companies.
Mẫu thiết kế hồ sơ năng lực công ty cơ khi HTMP
This document provides information about Vietnam HTMP Mechanical.,LTD and Vietnam HTMP Joint Stock Company. It summarizes the companies' establishment, facilities, production capabilities, and customers. Vietnam HTMP Mechanical was established in 2006 and produces molds and dies from its factory in Hanoi. Vietnam HTMP Joint Stock produces plastic parts from its factory located at the same site. Both companies have grown significantly over the years and now produce for major international customers in industries such as automotive, electronics, and appliances.
5756219
This certificate confirms that Ausra Rickute successfully completed Compressed Air Emergency Breathing System Initial Deployment Training. The training was approved by OPITO and took place on March 19, 2015 at an offsite location in Billingham, United Kingdom. The certificate includes details of the training provider, participant, course code, and authorized signature.
CE Certification (2).pdf
CE Marking is a certification that determines product conformity with health, safety and environmental protection standards. CE marking applies to product sold within the European economic area (EEA).
CE Certification.ppt
Türkiye’de CE Sertifikası Nasıl Alınır?
Entegre Değerlendirme Hizmetleri (IAS), Türkiye’de CE Uyumluluğu için CE sertifikası sağlar. Bir ürün üzerindeki CE İşareti, üretici tarafından ürünün Avrupa Birliği üye ülkelerinde uygulanan tüm ilgili direktiflere uygun olduğuna dair bir beyandır.
Benefits of CE Mark Certification in Denmark.pdf
The CE mark certification in Denmark provides several key benefits:
1) It allows for free trade of products within the EU as the CE mark ensures products meet European safety, health, and environmental standards.
2) It provides assurance to users that certified products are safe to use as intended based on compliance with European regulations.
3) It opens up global markets for Danish manufacturers as the CE mark is internationally recognized as demonstrating a product's compliance with European standards.
CE marking
In your daily life, while using and handling items such as mobile phones, music players, toys, cables, and other
electronic equipment or machines, you might have noticed two letters, CE, on these products. Forasmuch as
this is a mark applicable to products traded within the European Economic Area (EEA, the 27 Member States
of the European Union [EU] and 3 countries of the European Free Trade Association [EFTA]: Norway, Iceland
and Liechtenstein), consumers living in these areas may be familiar with it as it can be found in almost every
product. But yet many people may wonder why it is applied to products or what does it serve for.
Recommended
Esclab 2016
ESCLAB is an Algerian scientific equipment company founded in 2004 that works with over 20 global partners. It has offices in Béjaïa, Algiers, Oran, and Annaba, with plans to expand. ESCLAB's staff has grown from 15 employees in 2004 to over 28 currently. The company focuses on sales, maintenance, calibration, and validation of laboratory equipment. It has four divisions - analytical, measurement, electrochemistry, and laboratory. ESCLAB's annual turnover, which does not include indirect sales, has increased from millions of euros initially to millions currently. It serves customers across various sectors including universities, research institutions, oil and gas companies, pharmaceutical companies, and more.
D&C June Ingress article
GAMBICA has represented UK industry in over 100 standards committees to influence European and international standards. A new group called Ingress was formed by 16 European industry associations including GAMBICA's partners Orgalime, CAPIEL and CEMEP. Ingress aims to inform European policymakers about industry's interests and priorities for using harmonized standards to demonstrate compliance with EU legislation. The group wants industry to be formally included as observers in the regulatory Committee on Standards which makes decisions impacting European companies.
Mẫu thiết kế hồ sơ năng lực công ty cơ khi HTMP
This document provides information about Vietnam HTMP Mechanical.,LTD and Vietnam HTMP Joint Stock Company. It summarizes the companies' establishment, facilities, production capabilities, and customers. Vietnam HTMP Mechanical was established in 2006 and produces molds and dies from its factory in Hanoi. Vietnam HTMP Joint Stock produces plastic parts from its factory located at the same site. Both companies have grown significantly over the years and now produce for major international customers in industries such as automotive, electronics, and appliances.
5756219
This certificate confirms that Ausra Rickute successfully completed Compressed Air Emergency Breathing System Initial Deployment Training. The training was approved by OPITO and took place on March 19, 2015 at an offsite location in Billingham, United Kingdom. The certificate includes details of the training provider, participant, course code, and authorized signature.
CE Certification (2).pdf
CE Marking is a certification that determines product conformity with health, safety and environmental protection standards. CE marking applies to product sold within the European economic area (EEA).
CE Certification.ppt
Türkiye’de CE Sertifikası Nasıl Alınır?
Entegre Değerlendirme Hizmetleri (IAS), Türkiye’de CE Uyumluluğu için CE sertifikası sağlar. Bir ürün üzerindeki CE İşareti, üretici tarafından ürünün Avrupa Birliği üye ülkelerinde uygulanan tüm ilgili direktiflere uygun olduğuna dair bir beyandır.
Benefits of CE Mark Certification in Denmark.pdf
The CE mark certification in Denmark provides several key benefits:
1) It allows for free trade of products within the EU as the CE mark ensures products meet European safety, health, and environmental standards.
2) It provides assurance to users that certified products are safe to use as intended based on compliance with European regulations.
3) It opens up global markets for Danish manufacturers as the CE mark is internationally recognized as demonstrating a product's compliance with European standards.
CE marking
In your daily life, while using and handling items such as mobile phones, music players, toys, cables, and other
electronic equipment or machines, you might have noticed two letters, CE, on these products. Forasmuch as
this is a mark applicable to products traded within the European Economic Area (EEA, the 27 Member States
of the European Union [EU] and 3 countries of the European Free Trade Association [EFTA]: Norway, Iceland
and Liechtenstein), consumers living in these areas may be familiar with it as it can be found in almost every
product. But yet many people may wonder why it is applied to products or what does it serve for.
Why Choose IAS to Achieve CE Certification in Australia?
CE stands for “conformitéeuropéenne”, which translates to European conformity. For a product to be admitted into the European business market, it must have this mark. CE certification guarantees that the product and its packaging meet European safety and quality requirements. CE Certification in Australia certifies to buyers that a product has been made in compliance with European health, safety, and environmental laws.
The Important of CE Marking Certification.pdf
CE marking certification is a conformity marking that indicates a product's compliance with the essential health, safety, and environmental requirements set by the European Union (EU). The CE marking demonstrates that a product meets the applicable directives and regulations within the EU's single market. It is mandatory for many products sold or distributed within the EU and the European Economic Area (EEA).
Get ce marking certificate in india
URS India can help you gain easier access into the European market by ensuring your product meets all the CE marking requirements. Contact our Expert CE Marking and Get CE Marking Certificate in India.
CE marking and CE certification
CE marking and CE certification what is it why you need it who can apply
CE marking certification for medical devices. Medical Device Regulations. It Is Easy To Make Mistakes In The Regulatory Process That Can Delay.
Visit: http://www.meddevicecorp.com/
CE marking.pptx
This document provides an overview of CE marking requirements for medical devices being sold in the European Union. It explains that CE marking demonstrates compliance with European safety and performance standards and is required for medical devices to enter the EU market. The document outlines the classification of medical devices, the benefits of CE marking, applicable directives, requirements for affixing the marking and generating the necessary technical documentation and declaration of conformity.
The CPR and mandatory CE marking: what is changing and what will it mean for you
Starting in July this year, all construction products covered by harmonized European Standards under the Construction Products Regulation (CPR) will have to be CE marked to be legally sold in the UK and Ireland. This is a good thing for the building industry, as it will give purchasers the peace of mind that all the products they buy meet minimum criteria, as shown by CE Marking supported by test reports and documentation. For critical products, such as fixed fire fighting equipment, the CE marking has to be backed up by Independent testing and certification by a Notified Body.
CB Scheme and CE Marking Services
The product that has once been awarded as CE marking then it is able to move freely within the European free trade association and the European Union Countries. and The CB Certification is valid for three years or less. The CB scheme is for manufacturers who want a smooth export process for electrical products. For more information: info@urs-labs.com
7 Steps - How to Get a CE Marking Certification for Medical Devices?
The document outlines the 7 steps to obtain CE marking certification for a medical device: 1) Classify the device, 2) Identify relevant standards and regulations, 3) Compile technical documentation and testing results, 4) Appoint a European authorized representative if located outside the EU, 5) Obtain certification from a notified body for class II/III devices or self-certify for class I, 6) Affix the CE marking, and 7) Comply with any national requirements. The service described can assist manufacturers with all aspects of the certification process.
CE Marking - Product Certification
CE marking is a self-declaration where a manufacturer proves compliance with EU health, safety and environmental protection legislation and confirms a product’s compliance with relevant requirements.
what does the ce on products mean (1).pdf
The CE marking indicates that a product complies with applicable EU health, safety, and environmental protection legislation. It must be applied to products sold in the European Economic Area. To obtain the CE marking, manufacturers or importers must ensure the product conforms to all relevant EU standards, decide if self-evaluation or a notified body assessment is required, sign a declaration of conformity, and compile a technical dossier demonstrating compliance. The CE marking allows for the free circulation of products within the EEA markets.
CE Marking folder EN
The document summarizes the process of CE marking for construction products in the European Union. It explains that CE marking allows free movement of products within the EU and signifies that a product meets all relevant European regulations and directives. It outlines the key aspects of the CE marking process including identifying if a harmonized product standard exists, determining the assessment and verification of constancy of performance level, assessing product conformity, compiling technical documentation, and affixing the CE mark with a declaration of performance.
Doc1
CE marking is a mandatory conformity marking for certain products sold in Europe that indicates the product complies with European directives and can be legally sold. USL India helps manufacturers obtain CE marking through testing products and preparing technical files to demonstrate compliance. They assist with identifying applicable directives and standards, performing evaluations and audits, and obtaining certification. This enables clients to gain access to the European market.
CE Marking Presentation
Many products require CE marking before they can be sold in the EU. CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health, and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU.
When is CE marking mandatory?
CE marking is only obligatory for products for which EU specifications exist and require the affixing of CE marking.
Some products are subject to several EU requirements at the same time. You must make sure that your product complies with all the relevant requirements before affixing the CE marking to it. It is forbidden to affix the CE marking to products for which EU specifications do not exist or do not require the affixing of CE marking.
Ce marking
This webinar provides an overview of the European Union directives governing medical devices, in vitro diagnostic devices, and active implantable medical devices. It discusses the regulatory requirements and quality standards of the Medical Device Directive, Active Implantable Medical Device Directive, and In Vitro Diagnostic Device Directive. The objectives are to explain how EU laws are made, provide an overview of the EU regulatory framework for medical devices, and cover topics like device classification, technical files, declarations of conformity, clinical evaluation, and post-market requirements. The webinar aims to help participants understand EU regulations to efficiently achieve compliance and bring innovative medical products to the EU market faster.
Ce marking and methods to apply presentation
CE Marking is the symbol as shown on the top of this page. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.
"CE Mark" is also in use, but it is NOT the official term. For instance, in the Directive 2007/47/ec, of 5 September 2007, amending the directives 90/385/eec, 93/42/eec & 98/8/ec, the term CE Marking appears 9 times whereas CE Mark appears nowhere in the entire 35-page document.
CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.*
Cpr literature
Eurotech is a UK-based certification company that has been providing CE marking certification services for various product categories for 10 years. They work with a notified body in Bulgaria called Dedal to support Indian manufacturers seeking CE certification. CE marking certification is mandatory for exporting products to the European Economic Area and ensures products meet technical standards and performance levels. Eurotech guides clients through the process of technical assessments, factory inspections, declaration of performance documentation, and affixing the CE marking.
C E MARK leaflet economic_operators_en
We are the first and only adviser for CE mark in the Arab region .
we operate from Stockholm to serve you faster .
just contact us
executive@qualitasintl.co.uk
نحن الخبراء العرب الوحيدون في العالم العربي لتمكينكم من التصدير الى اوربا الحصول على علامة سلامة استخدام منتجاتكم وفق الكودات الاوربية
CE MARK
just contact us
executive@qualitasintl.co.uk
Ce mark interdiction
This document provides information about CE marking requirements for exporting to Europe. It discusses:
1) The CE marking system aims to provide a single set of safety and environmental standards for products sold in Europe.
2) Manufacturers must follow procedures like developing a declaration of conformity and technical file to affix the CE marking.
3) Numerous European directives cover different product categories and specify the requirements to access the European market.
Ce marking
The document discusses CE marking requirements for products sold in the European Economic Area. CE marking indicates that a product has been assessed to meet EU safety, health, and environmental standards. It allows for free movement of products within the EEA market. Certain products, like windows and doors, require CE marking if they need to meet standards for properties like U-value. Manufacturers are responsible for conformity assessment, documentation, and affixing the CE mark. Hardware generally does not require separate testing unless it contributes to hazardous substances, U-values, or is a safety device like restrictors.
SQM Compliance Insp. Rev 1.4
This document provides information about SQM Group, a technical and legal organization that specializes in helping companies comply with European safety directives and regulations. SQM Group offers services such as product testing and certification, technical file preparation, factory audits, and acting as an authorized representative for importers. The document outlines the various European directives that SQM can assist with, including directives for electromagnetic compatibility, low voltage products, toys, chemicals, and more. It also describes the roles and responsibilities of different economic operators under European directives, such as manufacturers, importers, and distributors. Finally, it provides details on the compliance management and inspection services that SQM offers to help manufacturers and importers verify and maintain regulatory compliance.
More Related Content
Similar to Ce marking
Why Choose IAS to Achieve CE Certification in Australia?
CE stands for “conformitéeuropéenne”, which translates to European conformity. For a product to be admitted into the European business market, it must have this mark. CE certification guarantees that the product and its packaging meet European safety and quality requirements. CE Certification in Australia certifies to buyers that a product has been made in compliance with European health, safety, and environmental laws.
The Important of CE Marking Certification.pdf
CE marking certification is a conformity marking that indicates a product's compliance with the essential health, safety, and environmental requirements set by the European Union (EU). The CE marking demonstrates that a product meets the applicable directives and regulations within the EU's single market. It is mandatory for many products sold or distributed within the EU and the European Economic Area (EEA).
Get ce marking certificate in india
URS India can help you gain easier access into the European market by ensuring your product meets all the CE marking requirements. Contact our Expert CE Marking and Get CE Marking Certificate in India.
CE marking and CE certification
CE marking and CE certification what is it why you need it who can apply
CE marking certification for medical devices. Medical Device Regulations. It Is Easy To Make Mistakes In The Regulatory Process That Can Delay.
Visit: http://www.meddevicecorp.com/
CE marking.pptx
This document provides an overview of CE marking requirements for medical devices being sold in the European Union. It explains that CE marking demonstrates compliance with European safety and performance standards and is required for medical devices to enter the EU market. The document outlines the classification of medical devices, the benefits of CE marking, applicable directives, requirements for affixing the marking and generating the necessary technical documentation and declaration of conformity.
The CPR and mandatory CE marking: what is changing and what will it mean for you
Starting in July this year, all construction products covered by harmonized European Standards under the Construction Products Regulation (CPR) will have to be CE marked to be legally sold in the UK and Ireland. This is a good thing for the building industry, as it will give purchasers the peace of mind that all the products they buy meet minimum criteria, as shown by CE Marking supported by test reports and documentation. For critical products, such as fixed fire fighting equipment, the CE marking has to be backed up by Independent testing and certification by a Notified Body.
CB Scheme and CE Marking Services
The product that has once been awarded as CE marking then it is able to move freely within the European free trade association and the European Union Countries. and The CB Certification is valid for three years or less. The CB scheme is for manufacturers who want a smooth export process for electrical products. For more information: info@urs-labs.com
7 Steps - How to Get a CE Marking Certification for Medical Devices?
The document outlines the 7 steps to obtain CE marking certification for a medical device: 1) Classify the device, 2) Identify relevant standards and regulations, 3) Compile technical documentation and testing results, 4) Appoint a European authorized representative if located outside the EU, 5) Obtain certification from a notified body for class II/III devices or self-certify for class I, 6) Affix the CE marking, and 7) Comply with any national requirements. The service described can assist manufacturers with all aspects of the certification process.
CE Marking - Product Certification
CE marking is a self-declaration where a manufacturer proves compliance with EU health, safety and environmental protection legislation and confirms a product’s compliance with relevant requirements.
what does the ce on products mean (1).pdf
The CE marking indicates that a product complies with applicable EU health, safety, and environmental protection legislation. It must be applied to products sold in the European Economic Area. To obtain the CE marking, manufacturers or importers must ensure the product conforms to all relevant EU standards, decide if self-evaluation or a notified body assessment is required, sign a declaration of conformity, and compile a technical dossier demonstrating compliance. The CE marking allows for the free circulation of products within the EEA markets.
CE Marking folder EN
The document summarizes the process of CE marking for construction products in the European Union. It explains that CE marking allows free movement of products within the EU and signifies that a product meets all relevant European regulations and directives. It outlines the key aspects of the CE marking process including identifying if a harmonized product standard exists, determining the assessment and verification of constancy of performance level, assessing product conformity, compiling technical documentation, and affixing the CE mark with a declaration of performance.
Doc1
CE marking is a mandatory conformity marking for certain products sold in Europe that indicates the product complies with European directives and can be legally sold. USL India helps manufacturers obtain CE marking through testing products and preparing technical files to demonstrate compliance. They assist with identifying applicable directives and standards, performing evaluations and audits, and obtaining certification. This enables clients to gain access to the European market.
CE Marking Presentation
Many products require CE marking before they can be sold in the EU. CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health, and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU.
When is CE marking mandatory?
CE marking is only obligatory for products for which EU specifications exist and require the affixing of CE marking.
Some products are subject to several EU requirements at the same time. You must make sure that your product complies with all the relevant requirements before affixing the CE marking to it. It is forbidden to affix the CE marking to products for which EU specifications do not exist or do not require the affixing of CE marking.
Ce marking
This webinar provides an overview of the European Union directives governing medical devices, in vitro diagnostic devices, and active implantable medical devices. It discusses the regulatory requirements and quality standards of the Medical Device Directive, Active Implantable Medical Device Directive, and In Vitro Diagnostic Device Directive. The objectives are to explain how EU laws are made, provide an overview of the EU regulatory framework for medical devices, and cover topics like device classification, technical files, declarations of conformity, clinical evaluation, and post-market requirements. The webinar aims to help participants understand EU regulations to efficiently achieve compliance and bring innovative medical products to the EU market faster.
Ce marking and methods to apply presentation
CE Marking is the symbol as shown on the top of this page. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.
"CE Mark" is also in use, but it is NOT the official term. For instance, in the Directive 2007/47/ec, of 5 September 2007, amending the directives 90/385/eec, 93/42/eec & 98/8/ec, the term CE Marking appears 9 times whereas CE Mark appears nowhere in the entire 35-page document.
CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.*
Cpr literature
Eurotech is a UK-based certification company that has been providing CE marking certification services for various product categories for 10 years. They work with a notified body in Bulgaria called Dedal to support Indian manufacturers seeking CE certification. CE marking certification is mandatory for exporting products to the European Economic Area and ensures products meet technical standards and performance levels. Eurotech guides clients through the process of technical assessments, factory inspections, declaration of performance documentation, and affixing the CE marking.
C E MARK leaflet economic_operators_en
We are the first and only adviser for CE mark in the Arab region .
we operate from Stockholm to serve you faster .
just contact us
executive@qualitasintl.co.uk
نحن الخبراء العرب الوحيدون في العالم العربي لتمكينكم من التصدير الى اوربا الحصول على علامة سلامة استخدام منتجاتكم وفق الكودات الاوربية
CE MARK
just contact us
executive@qualitasintl.co.uk
Ce mark interdiction
This document provides information about CE marking requirements for exporting to Europe. It discusses:
1) The CE marking system aims to provide a single set of safety and environmental standards for products sold in Europe.
2) Manufacturers must follow procedures like developing a declaration of conformity and technical file to affix the CE marking.
3) Numerous European directives cover different product categories and specify the requirements to access the European market.
Ce marking
The document discusses CE marking requirements for products sold in the European Economic Area. CE marking indicates that a product has been assessed to meet EU safety, health, and environmental standards. It allows for free movement of products within the EEA market. Certain products, like windows and doors, require CE marking if they need to meet standards for properties like U-value. Manufacturers are responsible for conformity assessment, documentation, and affixing the CE mark. Hardware generally does not require separate testing unless it contributes to hazardous substances, U-values, or is a safety device like restrictors.
SQM Compliance Insp. Rev 1.4
This document provides information about SQM Group, a technical and legal organization that specializes in helping companies comply with European safety directives and regulations. SQM Group offers services such as product testing and certification, technical file preparation, factory audits, and acting as an authorized representative for importers. The document outlines the various European directives that SQM can assist with, including directives for electromagnetic compatibility, low voltage products, toys, chemicals, and more. It also describes the roles and responsibilities of different economic operators under European directives, such as manufacturers, importers, and distributors. Finally, it provides details on the compliance management and inspection services that SQM offers to help manufacturers and importers verify and maintain regulatory compliance.
Similar to Ce marking (20)
Why Choose IAS to Achieve CE Certification in Australia?
Why Choose IAS to Achieve CE Certification in Australia?
The CPR and mandatory CE marking: what is changing and what will it mean for you
The CPR and mandatory CE marking: what is changing and what will it mean for you
7 Steps - How to Get a CE Marking Certification for Medical Devices?
7 Steps - How to Get a CE Marking Certification for Medical Devices?
Ce marking
- 1. CE MARKING CERTIFICATION SERVICES CDG CERTIFICATION LTD. DELHI-9999974494 , MUMBAI-9769240046 KOLKATA-9874259106
- 2. INTRODUCTION OF CE MARKING CE Marking is European Product Safety Regulations. Products and installations that are put into use in the European market must comply to theCE marking and CE certification regulations. Only if products comply to the European Directives can they gain the CE approval and be supplied with a CE certificate.
- 3. The CE marking is required for many products. It states that the product is assessed before being placed on the market and meets EU safety, health and environmental protection requirements. Through this website the European Commission provides economic operators and consumers with information on how the process of affixing the CE marking on a product works. CE marking now provides product access to 27 countries with a population of nearly 500 million.
- 4. As a manufacturer, this will lead you through the process of affixing the CE marking to your specific product, by clearly illustrating the key steps to undertake from the beginning to the trading of the product. Our CE certification experts can indicate the correct procedures related to the CE mark the CE marking and CE certification so a correct CE approval can be achieved.