Ccna
•
1 like•615 views
The document outlines the curriculum for the CCNA (640-802) certification. It is divided into two parts (ICND1 and ICND2) that cover topics such as networking fundamentals, Ethernet, wireless networking, routing, switching, VLANs, OSPF, EIGRP, ACLs, NAT, IPv6, VPNs, WAN technologies and more. The curriculum aims to teach students how to build, configure and troubleshoot networks with Cisco devices. The total estimated duration to complete the entire CCNA curriculum is 62 hours.
Report
Share
Report
Share
Download to read offline
Recommended
Cisco
This document discusses network requirements and issues with nonhierarchical network devices that have large collision domains and broadcast domains and high latency that make them difficult to troubleshoot. It also covers issues with layer 2 switching, including that there is no traffic between VLANs, an unbounded broadcast domain, and servers not being centrally located, as well as hardware-based bridging.
CCNA part 3
This document provides an outline for Cisco Certified Network Associate certification preparation. It includes 7 topics: 1) introduction to switching, 2) switch configuration, 3) VLANs, 4) VTP protocol, 5) Spanning Tree protocol, 6) inter-VLAN routing, and 7) wireless foundations.
Virtualizing the ubc network
The document summarizes the network architecture at the University of British Columbia (UBC) and introduces a new concept of network virtualization using Virtual Routing and Forwarding instances (VRFs). Key points include:
- UBC operates a two-layer core network with 10GIG links and uses VLANs within buildings.
- A new concept of VRFs allows network virtualization across the entire campus by creating private virtual routing tables. This gives departments their own private campus-wide networks.
- "Virtual networks" combine VLANs, subnets, and VRFs belonging to a department, along with a virtual firewall, to provide security and connectivity across buildings.
Drastic vsat installer_course
The document summarizes a VSAT installation course provided by DRASTIC that covers [1] the basics of satellite communications theory, [2] practical VSAT installation techniques, and [3] hands-on training with iDirect satellite modem equipment. The 4-5 day course includes both classroom lectures and practical activities like assembling antenna mounts and electronics. Regular course dates are listed on DRASTIC's website, with the goal of training installers to properly set up VSAT systems and avoid interference with other networks.
World Connect Training
World Connect Service provides encryption of data transmissions over public IP networks using Certes boxes. Certes boxes use IPSec technology to encrypt entire IP packets in tunnel mode and encapsulate them for secure network-to-network communications. Benefits include data confidentiality, encryption/decryption, key management, and automatic session management. Certes boxes support full mesh, hub-and-spoke, and peer-to-peer topologies over layer 3 IPsec tunnels. WTD teams play a role in understanding the customer topology and performing basic speed/duplex settings during circuit turn up.
Ccna (200 125)
Hello!
Welcome to our CCNA Training (R&S) 200-125 series in Urdu.
CCNA stands for Cisco Certified Network Associate. R&S means Routing & Switching. The Exam Code of this course in 200-125. It's the basic course of CCNA track. If you want to start any certification like CCNA Security then you must pass the exam of CCNA R&S first. The exam time of this course is 90-120 mints. Here 90 mints time is for English Speaking Person & 120 mints time for non-native speakers. Total Marks of Exam is 1000 & Passing mark is 860. Number of Questions in Exam is 55 to 65.
You can book the exam from Pearson testing service.
Here is the link of Exam website.
https://home.pearsonvue.com
EZXPRT an IT Trainnig Institute offers CISCO , Microsoft, Vmware, Huawei, Trainings in Rawalpindi, Lahore, Mirpur and Wah Cant campuses,
We offer ONLINE Live and Recorded Training's on demand and we provide services of Career Counseling, Motivation etc.
For more details you may contact
WhatsApp/Call :+923-23-4699123
shafqaat@ezprt.com
www.ezxprt.com
www.facebook.com/ezxprt
www.youtube.com/c/ezxprt
Ceh
This course teaches ethical hacking skills through 25 modules that immerse students in scanning, testing, hacking, and securing their own systems in a simulated environment. The course is intended to benefit security officers, auditors, and professionals concerned with network integrity. Modules cover topics like footprinting, scanning, enumeration, system hacking, social engineering, wireless hacking, and cryptography. Later modules address more advanced techniques like exploit writing, covert hacking, and virus writing.
Php
The document outlines a 10-part curriculum for PHP programming. It covers best practices like coding standards and documentation. It also covers topics like variables, functions, file uploads/downloads, database interaction, sessions, authentication, security, debugging, and building a sample web application. The goal is to teach students proper PHP programming techniques and skills to develop web applications.
Recommended
Cisco
This document discusses network requirements and issues with nonhierarchical network devices that have large collision domains and broadcast domains and high latency that make them difficult to troubleshoot. It also covers issues with layer 2 switching, including that there is no traffic between VLANs, an unbounded broadcast domain, and servers not being centrally located, as well as hardware-based bridging.
CCNA part 3
This document provides an outline for Cisco Certified Network Associate certification preparation. It includes 7 topics: 1) introduction to switching, 2) switch configuration, 3) VLANs, 4) VTP protocol, 5) Spanning Tree protocol, 6) inter-VLAN routing, and 7) wireless foundations.
Virtualizing the ubc network
The document summarizes the network architecture at the University of British Columbia (UBC) and introduces a new concept of network virtualization using Virtual Routing and Forwarding instances (VRFs). Key points include:
- UBC operates a two-layer core network with 10GIG links and uses VLANs within buildings.
- A new concept of VRFs allows network virtualization across the entire campus by creating private virtual routing tables. This gives departments their own private campus-wide networks.
- "Virtual networks" combine VLANs, subnets, and VRFs belonging to a department, along with a virtual firewall, to provide security and connectivity across buildings.
Drastic vsat installer_course
The document summarizes a VSAT installation course provided by DRASTIC that covers [1] the basics of satellite communications theory, [2] practical VSAT installation techniques, and [3] hands-on training with iDirect satellite modem equipment. The 4-5 day course includes both classroom lectures and practical activities like assembling antenna mounts and electronics. Regular course dates are listed on DRASTIC's website, with the goal of training installers to properly set up VSAT systems and avoid interference with other networks.
World Connect Training
World Connect Service provides encryption of data transmissions over public IP networks using Certes boxes. Certes boxes use IPSec technology to encrypt entire IP packets in tunnel mode and encapsulate them for secure network-to-network communications. Benefits include data confidentiality, encryption/decryption, key management, and automatic session management. Certes boxes support full mesh, hub-and-spoke, and peer-to-peer topologies over layer 3 IPsec tunnels. WTD teams play a role in understanding the customer topology and performing basic speed/duplex settings during circuit turn up.
Ccna (200 125)
Hello!
Welcome to our CCNA Training (R&S) 200-125 series in Urdu.
CCNA stands for Cisco Certified Network Associate. R&S means Routing & Switching. The Exam Code of this course in 200-125. It's the basic course of CCNA track. If you want to start any certification like CCNA Security then you must pass the exam of CCNA R&S first. The exam time of this course is 90-120 mints. Here 90 mints time is for English Speaking Person & 120 mints time for non-native speakers. Total Marks of Exam is 1000 & Passing mark is 860. Number of Questions in Exam is 55 to 65.
You can book the exam from Pearson testing service.
Here is the link of Exam website.
https://home.pearsonvue.com
EZXPRT an IT Trainnig Institute offers CISCO , Microsoft, Vmware, Huawei, Trainings in Rawalpindi, Lahore, Mirpur and Wah Cant campuses,
We offer ONLINE Live and Recorded Training's on demand and we provide services of Career Counseling, Motivation etc.
For more details you may contact
WhatsApp/Call :+923-23-4699123
shafqaat@ezprt.com
www.ezxprt.com
www.facebook.com/ezxprt
www.youtube.com/c/ezxprt
Ceh
This course teaches ethical hacking skills through 25 modules that immerse students in scanning, testing, hacking, and securing their own systems in a simulated environment. The course is intended to benefit security officers, auditors, and professionals concerned with network integrity. Modules cover topics like footprinting, scanning, enumeration, system hacking, social engineering, wireless hacking, and cryptography. Later modules address more advanced techniques like exploit writing, covert hacking, and virus writing.
Php
The document outlines a 10-part curriculum for PHP programming. It covers best practices like coding standards and documentation. It also covers topics like variables, functions, file uploads/downloads, database interaction, sessions, authentication, security, debugging, and building a sample web application. The goal is to teach students proper PHP programming techniques and skills to develop web applications.
Cvoice
This document outlines a course on Cisco Unified Communications solutions. The course objectives are to learn Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Presence. The curriculum contains 7 lessons that cover an overview of the solutions, call flows, endpoint and user administration, enabling telephony and mobility features, Cisco Unity Connection and Cisco Unified Presence, and maintenance of the systems.
Maintenance
This course teaches students how to maintain and troubleshoot personal computers. Over 10 lessons, students will learn to identify PC components, install and configure operating systems like Windows XP, maintain peripheral devices, and solve common hardware and software issues. They will also learn basic network fundamentals. The goal is for students to gain skills in PC installation, maintenance, troubleshooting, and repair so they can support end users and professionally service computers. Program requirements include basic Windows skills like file management and internet browsing.
Web develop diploma
The document outlines a web development diploma program consisting of 5 courses: HTML, PHP or ASP.net, an introduction to programming, Dreamweaver CS3 level 1 and 2, and JavaScript. The HTML course covers coding basics and working with text, images, lists, tables, frames and forms over 12 hours. The PHP/ASP.net course covers conditional statements, functions, arrays, data files, MySQL, scripting and operators over 16 hours. The intro to programming course provides an overview of software development, program execution and problem solving techniques over 6 hours. Dreamweaver covers page layout, templates, forms, multimedia and publishing over 24 hours. The JavaScript course covers basics, programming, user interaction, objects and advanced features over
Mcse messaging
This document provides information about the Microsoft Certified Systems Engineer (MCSE) Messaging certification track. The MCSE program targets professionals with at least 2 years of IT experience and certifies skills in planning, designing, and implementing Windows server solutions. The messaging specialization track requires candidates to pass 6 core exams covering Windows server administration, networking, and design, as well as 2 exams on implementing and managing Microsoft Exchange Server 2003. The total estimated time to complete the program is 336 hours.
Security+
This document provides information on the Security+ certification course. The course teaches skills for implementing basic security services on computer networks, including identifying security threats and concepts, hardening systems and network devices, securing communications, and managing public key infrastructure. The course objectives are to learn fundamental security concepts, threats, and how to harden systems, secure communications, manage PKI, enforce policies, and monitor security infrastructure. Basic Windows and networking skills are required to take the course.
Ic3
The document describes the Internet and Computing Core Certification (IC3). The certification has three exams that cover computing fundamentals, key applications, and living online. Computing fundamentals addresses computer hardware, software, operating systems and their functions. Key applications focuses on common functions of word processing, spreadsheets and presentations. Living online covers networks, email, using the internet, and its social impact. The curriculum aims to provide guidelines for basic computer and internet literacy.
Oracle 11g certified associate (oca)
This course provides hands-on training to effectively plan, install, configure, administer, query, troubleshoot and manage Oracle databases. Students will learn how to install and manage Oracle databases, perform administrative tasks such as backup and recovery, and tune database performance. The course prepares students for the Oracle 11g Certified Associate certification exam.
CCNA
The document outlines the curriculum for a CCNA (640-802) certification course. The curriculum is divided into two parts: Part 1 covers basic networking concepts like Ethernet, switching, routing, and wireless networking. Part 2 builds on these concepts and covers more advanced topics like VLANs, OSPF, EIGRP, ACLs, NAT, IPv6, and WAN technologies. The course is estimated to take 62 hours to complete.
Ccna courses
The document provides information about the CCNA certification course offered by IITC in Libya. The CCNA certification demonstrates knowledge in deploying, maintaining, and operating medium-sized networks using Cisco technologies. The course is divided into two parts (ICND1 and ICND2) that cover topics such as Ethernet, switching, routing, WAN technologies, and network security. It will take students 90 hours to complete and has no prerequisites, though some networking knowledge is useful.
Ccnp switch (300 115)
1. The document provides information about the CCNP (Cisco Certified Network Professional) training course offered by the Afghanistan Technical Vocational Institute.
2. The CCNP training focuses on routing, switching, and troubleshooting technologies and consists of modules on ROUTE, SWITCH, and TSHOOT.
3. Upon completion of the CCNP training, candidates will be able to plan, implement, verify and troubleshoot local and wide-area enterprise Cisco networks.
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - Certification
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - CertificationMohamed Haathim Sharfraz
Certificate for completing Cisco CCNA - Switching, Routing & Wireless Essentials on Cisco Networking AcademyN+
This course aims to prepare students for the CompTIA Network+ certification. The course will cover networking technologies, systems, skills and tools used in modern computer networks. It is divided into sections that will address topics such as networking protocols, media and topologies, network devices, management and security. The course assumes some basic computer knowledge but does not require any formal qualifications.
Cisco Certified Network Associate New
This document provides information about Cisco certification courses for the CCNA Routing and Switching certification. The courses cover topics such as networking fundamentals, Ethernet, wireless networking, routing, WAN technologies, VLANs, ACLs, OSPF, EIGRP, and network address translation. The courses are divided into two modules, with the first module focusing on basic networking topics and the second module expanding on those topics for medium-sized networks. Upon completing both modules, students will be prepared to earn the CCNA Routing and Switching certification.
CCNA-Routing-and-Switching-Course-Outline
This document outlines the courses for the CCNA Routing and Switching certification. It describes 4 courses: CCNA 1 covers basic networking concepts like IP addressing and Ethernet; CCNA 2 teaches routing and switching configuration; CCNA 3 introduces scaling networks with technologies like OSPF, EIGRP, and wireless LANs; and CCNA 4 focuses on connecting networks through WAN technologies, VPNs, and network monitoring. Each course lists its chapter topics and skills students will gain in areas like routing, switching, IP addressing, and network troubleshooting.
Study Wireless Security Deployment - PKL
This document identifies vulnerabilities in PKL Autoparts' network infrastructure and provides recommendations to address them. It finds that PKL lacks firewalls, VPN access, strong wireless security, network monitoring tools, and other critical security controls. The document then outlines a restructured network topology with separate subnets for each site to prevent broadcast storms. It recommends implementing a Cisco firewall to detect and prevent intrusions. Finally, it defines several new security policies around wireless devices, remote access, servers, and passwords to secure the network and prevent future breaches.
Red hat linux networking and security administration
This course provides an overview of configuring and administering a Red Hat Linux server to run key network services and security applications. The curriculum covers 9 units that teach system performance and security, access controls, networking, file sharing, web services, email, encryption, and account management. Students will complete hands-on labs reinforcing topics like system monitoring, securing networking, implementing a DNS server, and electronic mail configuration.
Shaikh Mehemood CV
Mehemood Mustaqim Shaikh is seeking a position in networking or network engineering. He has over 5 years of experience working as a network engineer for SIFY Technologies Ltd where he maintains uptime of core network and data center devices. He has extensive experience configuring Cisco routers, switches, and other networking devices. He has certifications including CCNA, CCNP, and CCIE in routing and switching.
Elite Training Consultacy
The CCNAB Cisco Boot Camp is an intensive 5-day instructor-led course to help students pass the CCNA certification exams. The course provides both self-paced online learning and hands-on lab exercises to teach students how to install, configure, operate, and troubleshoot medium-sized routed and switched networks. Topics include Ethernet, wireless, routing, WAN technologies, VLANs, ACLs, NAT, and IPv6. The course is suitable for network professionals seeking CCNA certification and a career in Cisco networking.
main_phase1 _3.pptx
This document describes a network design project for a university campus implemented using Cisco Packet Tracer. The network incorporates various protocols including VLAN, DNS, DHCP, HSRP, FTP, email services, OSPF, and Internet of Things (IoT) technologies to connect devices on the campus network. Python and JavaScript were used as programming languages, and the network was simulated using Cisco Packet Tracer. The results demonstrated functionality of key network services and communication between endpoints on the LAN and WAN. Future work is proposed to implement software-defined networking (SDN) for greater reliability, efficiency, cost savings and scalability of the campus network.
Ccnp
The document outlines the curriculum for Cisco's CCNP certification exams 642-902 ROUTE, 642-813 SWITCH, and 642-832 TSHOOT. The ROUTE exam focuses on implementing EIGRP, OSPF, eBGP, IPv6, and redistribution routing solutions. The SWITCH exam focuses on VLANs, security, Layer 3 services, wireless/VoIP support, and high availability. The TSHOOT exam focuses on monitoring and troubleshooting routing protocols, DHCP, NAT, IPv6, switching technologies, advanced services, security, and AAA authentication.
Security Issues of IEEE 802.11b
The document discusses security issues with IEEE 802.11b wireless local area networks (WLANs). It outlines 7 main security problems: 1) easy access to networks, 2) unauthorized access points, 3) unauthorized use of services, 4) constraints on service and performance, 5) MAC spoofing and session hijacking, 6) traffic analysis and eavesdropping, 7) higher level attacks once access is gained. It then analyzes weaknesses in the Wired Equivalent Privacy (WEP) encryption used by 802.11b and outlines improvements made in later standards like Wi-Fi Protected Access (WPA) and 802.11i.
More Related Content
Viewers also liked
Cvoice
This document outlines a course on Cisco Unified Communications solutions. The course objectives are to learn Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Presence. The curriculum contains 7 lessons that cover an overview of the solutions, call flows, endpoint and user administration, enabling telephony and mobility features, Cisco Unity Connection and Cisco Unified Presence, and maintenance of the systems.
Maintenance
This course teaches students how to maintain and troubleshoot personal computers. Over 10 lessons, students will learn to identify PC components, install and configure operating systems like Windows XP, maintain peripheral devices, and solve common hardware and software issues. They will also learn basic network fundamentals. The goal is for students to gain skills in PC installation, maintenance, troubleshooting, and repair so they can support end users and professionally service computers. Program requirements include basic Windows skills like file management and internet browsing.
Web develop diploma
The document outlines a web development diploma program consisting of 5 courses: HTML, PHP or ASP.net, an introduction to programming, Dreamweaver CS3 level 1 and 2, and JavaScript. The HTML course covers coding basics and working with text, images, lists, tables, frames and forms over 12 hours. The PHP/ASP.net course covers conditional statements, functions, arrays, data files, MySQL, scripting and operators over 16 hours. The intro to programming course provides an overview of software development, program execution and problem solving techniques over 6 hours. Dreamweaver covers page layout, templates, forms, multimedia and publishing over 24 hours. The JavaScript course covers basics, programming, user interaction, objects and advanced features over
Mcse messaging
This document provides information about the Microsoft Certified Systems Engineer (MCSE) Messaging certification track. The MCSE program targets professionals with at least 2 years of IT experience and certifies skills in planning, designing, and implementing Windows server solutions. The messaging specialization track requires candidates to pass 6 core exams covering Windows server administration, networking, and design, as well as 2 exams on implementing and managing Microsoft Exchange Server 2003. The total estimated time to complete the program is 336 hours.
Security+
This document provides information on the Security+ certification course. The course teaches skills for implementing basic security services on computer networks, including identifying security threats and concepts, hardening systems and network devices, securing communications, and managing public key infrastructure. The course objectives are to learn fundamental security concepts, threats, and how to harden systems, secure communications, manage PKI, enforce policies, and monitor security infrastructure. Basic Windows and networking skills are required to take the course.
Ic3
The document describes the Internet and Computing Core Certification (IC3). The certification has three exams that cover computing fundamentals, key applications, and living online. Computing fundamentals addresses computer hardware, software, operating systems and their functions. Key applications focuses on common functions of word processing, spreadsheets and presentations. Living online covers networks, email, using the internet, and its social impact. The curriculum aims to provide guidelines for basic computer and internet literacy.
Oracle 11g certified associate (oca)
This course provides hands-on training to effectively plan, install, configure, administer, query, troubleshoot and manage Oracle databases. Students will learn how to install and manage Oracle databases, perform administrative tasks such as backup and recovery, and tune database performance. The course prepares students for the Oracle 11g Certified Associate certification exam.
Viewers also liked (8)
Similar to Ccna
CCNA
The document outlines the curriculum for a CCNA (640-802) certification course. The curriculum is divided into two parts: Part 1 covers basic networking concepts like Ethernet, switching, routing, and wireless networking. Part 2 builds on these concepts and covers more advanced topics like VLANs, OSPF, EIGRP, ACLs, NAT, IPv6, and WAN technologies. The course is estimated to take 62 hours to complete.
Ccna courses
The document provides information about the CCNA certification course offered by IITC in Libya. The CCNA certification demonstrates knowledge in deploying, maintaining, and operating medium-sized networks using Cisco technologies. The course is divided into two parts (ICND1 and ICND2) that cover topics such as Ethernet, switching, routing, WAN technologies, and network security. It will take students 90 hours to complete and has no prerequisites, though some networking knowledge is useful.
Ccnp switch (300 115)
1. The document provides information about the CCNP (Cisco Certified Network Professional) training course offered by the Afghanistan Technical Vocational Institute.
2. The CCNP training focuses on routing, switching, and troubleshooting technologies and consists of modules on ROUTE, SWITCH, and TSHOOT.
3. Upon completion of the CCNP training, candidates will be able to plan, implement, verify and troubleshoot local and wide-area enterprise Cisco networks.
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - Certification
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - CertificationMohamed Haathim Sharfraz
Certificate for completing Cisco CCNA - Switching, Routing & Wireless Essentials on Cisco Networking AcademyN+
This course aims to prepare students for the CompTIA Network+ certification. The course will cover networking technologies, systems, skills and tools used in modern computer networks. It is divided into sections that will address topics such as networking protocols, media and topologies, network devices, management and security. The course assumes some basic computer knowledge but does not require any formal qualifications.
Cisco Certified Network Associate New
This document provides information about Cisco certification courses for the CCNA Routing and Switching certification. The courses cover topics such as networking fundamentals, Ethernet, wireless networking, routing, WAN technologies, VLANs, ACLs, OSPF, EIGRP, and network address translation. The courses are divided into two modules, with the first module focusing on basic networking topics and the second module expanding on those topics for medium-sized networks. Upon completing both modules, students will be prepared to earn the CCNA Routing and Switching certification.
CCNA-Routing-and-Switching-Course-Outline
This document outlines the courses for the CCNA Routing and Switching certification. It describes 4 courses: CCNA 1 covers basic networking concepts like IP addressing and Ethernet; CCNA 2 teaches routing and switching configuration; CCNA 3 introduces scaling networks with technologies like OSPF, EIGRP, and wireless LANs; and CCNA 4 focuses on connecting networks through WAN technologies, VPNs, and network monitoring. Each course lists its chapter topics and skills students will gain in areas like routing, switching, IP addressing, and network troubleshooting.
Study Wireless Security Deployment - PKL
This document identifies vulnerabilities in PKL Autoparts' network infrastructure and provides recommendations to address them. It finds that PKL lacks firewalls, VPN access, strong wireless security, network monitoring tools, and other critical security controls. The document then outlines a restructured network topology with separate subnets for each site to prevent broadcast storms. It recommends implementing a Cisco firewall to detect and prevent intrusions. Finally, it defines several new security policies around wireless devices, remote access, servers, and passwords to secure the network and prevent future breaches.
Red hat linux networking and security administration
This course provides an overview of configuring and administering a Red Hat Linux server to run key network services and security applications. The curriculum covers 9 units that teach system performance and security, access controls, networking, file sharing, web services, email, encryption, and account management. Students will complete hands-on labs reinforcing topics like system monitoring, securing networking, implementing a DNS server, and electronic mail configuration.
Shaikh Mehemood CV
Mehemood Mustaqim Shaikh is seeking a position in networking or network engineering. He has over 5 years of experience working as a network engineer for SIFY Technologies Ltd where he maintains uptime of core network and data center devices. He has extensive experience configuring Cisco routers, switches, and other networking devices. He has certifications including CCNA, CCNP, and CCIE in routing and switching.
Elite Training Consultacy
The CCNAB Cisco Boot Camp is an intensive 5-day instructor-led course to help students pass the CCNA certification exams. The course provides both self-paced online learning and hands-on lab exercises to teach students how to install, configure, operate, and troubleshoot medium-sized routed and switched networks. Topics include Ethernet, wireless, routing, WAN technologies, VLANs, ACLs, NAT, and IPv6. The course is suitable for network professionals seeking CCNA certification and a career in Cisco networking.
main_phase1 _3.pptx
This document describes a network design project for a university campus implemented using Cisco Packet Tracer. The network incorporates various protocols including VLAN, DNS, DHCP, HSRP, FTP, email services, OSPF, and Internet of Things (IoT) technologies to connect devices on the campus network. Python and JavaScript were used as programming languages, and the network was simulated using Cisco Packet Tracer. The results demonstrated functionality of key network services and communication between endpoints on the LAN and WAN. Future work is proposed to implement software-defined networking (SDN) for greater reliability, efficiency, cost savings and scalability of the campus network.
Ccnp
The document outlines the curriculum for Cisco's CCNP certification exams 642-902 ROUTE, 642-813 SWITCH, and 642-832 TSHOOT. The ROUTE exam focuses on implementing EIGRP, OSPF, eBGP, IPv6, and redistribution routing solutions. The SWITCH exam focuses on VLANs, security, Layer 3 services, wireless/VoIP support, and high availability. The TSHOOT exam focuses on monitoring and troubleshooting routing protocols, DHCP, NAT, IPv6, switching technologies, advanced services, security, and AAA authentication.
Security Issues of IEEE 802.11b
The document discusses security issues with IEEE 802.11b wireless local area networks (WLANs). It outlines 7 main security problems: 1) easy access to networks, 2) unauthorized access points, 3) unauthorized use of services, 4) constraints on service and performance, 5) MAC spoofing and session hijacking, 6) traffic analysis and eavesdropping, 7) higher level attacks once access is gained. It then analyzes weaknesses in the Wired Equivalent Privacy (WEP) encryption used by 802.11b and outlines improvements made in later standards like Wi-Fi Protected Access (WPA) and 802.11i.
Security Issues of 802.11b
Seminar Paper on Security Issues of 802.11b based on IEEE Whitepaper by Boland, H. and Mousavi, H., Carleton University, Ottawa, Ont., Canada, IEEE Canadian Conference on Electrical and Computer Engineering, 2-5 May 2004
CCNA(R&S) By Ezxprt
EZXPRT an IT Trainnig Institute offers CISCO , Microsoft, Vmware, Huawei, Trainings in Rawalpindi, Lahore, Mirpur and Wah Cant campuses, We offer ONLINE Live and Recorded Training's on demand and we provide services of Career Counseling, Motivation etc.
.
CCNA stands for Cisco Certified Network Associate. R&S means Routing & Switching. The Exam Code of this course in 200-125. It's the basic course of CCNA track. If you want to start any certification like CCNA Security then you must pass the exam of CCNA R&S first. The exam time of this course is 90-120 mints. Here 90 mints time is for English Speaking Person & 120 mints time for non-native speakers. Total Marks of Exam is 1000 & Passing mark is 860. Number of Questions in Exam is 55 to 65.
You can book the exam from Pearson testing service.
Here is the link of Exam website.
https://home.pearsonvue.com
For more details you may contact
WhatsApp/Call :+923-23-4699123
shafqaat@ezprt.com
www.ezxprt.com
www.facebook.com/ezxprt
www.youtube.com/c/ezxprt
Cisco CCNA ENSA - (Enterprise Networking, Security and Automation) - Certific...
Cisco CCNA ENSA - (Enterprise Networking, Security and Automation) - Certific...Mohamed Haathim Sharfraz
Certificate for completing Cisco CCNA - Enterprise Networking, Security and Automation on Cisco Networking AcademyBrosur network2 server
This document describes a 5-day training course on LAN Switching & Wireless and Accessing the WAN from Two Sigma Technologies. The course covers CCNA curriculum including LAN design, switch configuration, VLANs, VTP, STP, wireless networking, WAN technologies, PPP, Frame Relay, network security, ACLs, IP addressing services and network troubleshooting. It provides an overview of the daily topics and schedule. Participants should have knowledge of networking fundamentals and routing concepts. The course aims to provide both theoretical knowledge and hands-on labs to IT professionals seeking CCNA certification.
Ccna 2nd Edition
The document summarizes a CCNA Complete Guide 2nd Edition book that covers the CCNA 640-802 exam syllabus. It contains theory and practical knowledge needed to pass the CCNA exam and work as a network engineer. The book includes lab setups and outputs to verify concepts. Obtaining this guide is described as the best investment for becoming an accomplished network engineer.
Final CV
Junaid Ihsan has a B.E. in Electrical and Computer Engineering and CCNA certification. He has experience as an intern in the networks department of PTCL and ZTBL. His networking skills include routing, switching, security, and software like Wireshark. He is proficient in Microsoft Office, Linux, networking and operating systems courses. His final year project involved modifying and analyzing congestion control mechanisms in ns2 and integrating it into a VOIP application. He aims to enhance his skills and help organizations meet their goals with integrity.
Similar to Ccna (20)
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - Certification
Cisco CCNA ENSA - (Switching, Routing & Wireless Essentials) - Certification
Red hat linux networking and security administration
Red hat linux networking and security administration
Cisco CCNA ENSA - (Enterprise Networking, Security and Automation) - Certific...
Cisco CCNA ENSA - (Enterprise Networking, Security and Automation) - Certific...
More from elshiekh1980
Adavanced maintenance diploma
The Maintenance Diploma document outlines the objectives, benefits and requirements of a course designed to expose participants to skills in computer hardware, software, network fundamentals and Windows 7. The course objectives are to identify components of desktop PCs and operating systems, install and configure system components, maintain and troubleshoot peripherals, and install and manage operating systems and network connections. Benefits include end-user skills with Windows PCs and the ability to browse the internet, start up/shut down computers, and manage files. The program consists of 15 lessons covering topics like PC hardware, components, troubleshooting, building computers, operating system fundamentals, Windows basics, managing Windows, viruses, networking technologies, media/topologies and maintenance
Web design diploma
The document outlines a web design diploma program consisting of 6 courses: HTML (12 hours), Photoshop CS3 (20 hours), Flash (15 hours), Swish Max (6 hours), Dreamweaver CS3 (24 hours split between levels 1 and 2), and JavaScript (3 hours). It also includes a 9-hour project. The goal is to teach students key skills for web design like coding in HTML, image editing in Photoshop, animation in Flash, website building in Dreamweaver, and programming with JavaScript.
Sql server 2005
This course teaches students how to implement and maintain Microsoft SQL Server 2005 databases. It covers how to create databases and tables, implement data integrity features like constraints and triggers, and perform administrative tasks like backup, restore, monitoring and troubleshooting. After taking the course students will be able to create and optimize databases, implement views, stored procedures and other SQL Server 2005 features.
Red hat linux system administration
The RH133 Red Hat System Administration course provides skills to manage Linux workstations and connect them to networks. The curriculum covers topics like package management, system initialization, kernel services, system services, file system management, user administration, network configuration, advanced user administration, advanced file system management, installation, virtualization with Xen, and troubleshooting. The course prepares students for professional responsibilities as a Linux systems administrator at the Technician level.
Red hat linux essentials
This document describes the RH033 Red Hat Linux Essentials course. The course is an introduction to fundamental end-user and administrative tools in Red Hat Enterprise Linux designed for those with little or no Linux experience. The course covers shell and command line essentials to prepare students for further Red Hat courses. It is aimed at IT professionals with no prior UNIX or Linux experience, experienced Linux administrators seeking RHCE certification, and experienced Solaris administrators. The curriculum is made up of 17 units covering topics like the Linux filesystem, users and permissions, shell usage, text editing and processing tools.
Oracle 11g with sql
This course provides an introduction to PL/SQL, Oracle's proprietary programming language. The course is designed for individuals with SQL knowledge and covers topics like PL/SQL environment, stored procedures, functions, triggers, variables, constants, control structures, error handling, packages, triggers and views used with PL/SQL. More information on the course or Oracle career paths can be obtained by calling 703-993-1551.
Oracle 11g structured query language (sql)
This course teaches students how to effectively query and manipulate data in an Oracle 11g database. The curriculum covers retrieving, restricting, and sorting data; using functions; aggregating data; joining tables; using subqueries, set operators, and DDL statements; and creating objects like tables, views, and indexes. The hands-on course assumes some computer and database experience and provides all necessary materials.
Oracle 11g rac administration
This course provides an introduction to installing, configuring, and administering Oracle Real Application Clusters (RAC) with Oracle Database 11g. The course benefits students by teaching them how to install Oracle Clusterware and RAC, configure services and storage, back up and recover RAC databases, and perform other administrative tasks. The curriculum is divided into multiple modules covering topics such as RAC installation, database creation, administration, monitoring, high availability, and disaster recovery.
Oracle 11g database security
This course teaches students how to secure their Oracle database to meet regulatory compliance requirements. It covers features like auditing, encryption, virtual private databases, labeling security and more. The hands-on training is designed for database administrators who want to enhance their Oracle 11g security knowledge. Topics include fundamental security concepts, choosing and implementing security solutions, authentication, access controls, encryption and securing network components.
Oracle 11g certified professional (ocp)
This course teaches students to effectively plan, install, configure, administer, query, troubleshoot and manage Oracle Databases. The curriculum covers topics such as database architecture, backup and recovery, performance tuning, and globalization. The course prepares students for Oracle certification exams and provides real-world skills in working with Oracle databases.
Mcse security
This document provides information about the Microsoft Certified Systems Engineer (MCSE) Security certification program. The MCSE Security certification focuses on designing, implementing, and administering security for Microsoft Windows Server 2003 networks. To earn the MCSE Security certification, candidates must pass eight exams: five core exams related to networking systems and client operating systems, and three specialization exams focused on security. The course covers topics like installing and maintaining Windows Server 2003, designing Active Directory networks with a focus on security, and implementing Internet security and acceleration servers. The program is intended for IT professionals with at least two years of experience seeking to demonstrate expertise in securing Windows server environments.
Mcsa security
The document provides information about the Microsoft Certified Systems Administrator (MCSA) Security certification program. It describes the program as assessing and maintaining IT networking and administration skills. It is intended for individuals employed or seeking employment as a systems administrator managing medium to large company computing environments. The program requires completing core exams in client operating systems, networking systems, and two security specialization exams over a total of 240 hours. It provides details on the specific exams and topics covered.
Mcitp server administrator 2008
The document provides information about the MCITP: Server Administrator 2008 certification course. The course aims to validate skills in installing, configuring, and administering Windows Server 2008 and computer networks. It is designed for individuals with computer and networking experience. The 153-hour course prepares students to take the MCTS exams for Configuring Windows Server 2008 Active Directory, Configuring Windows Server 2008 Network Infrastructure, and Windows Server Administration. Upon completion, students will be prepared for server administrator and network administrator roles.
Mcitp enterprise administrator 2008
This document outlines a course to prepare IT professionals to earn the MCITP: Enterprise Administrator certification for Windows Server 2008. To earn the certification, students must pass five exams, including four Microsoft Certified Technology Specialist prerequisite exams and one Professional Series exam, covering topics such as Active Directory configuration, network infrastructure configuration, and applications infrastructure configuration. The 296-hour course uses hands-on training to teach planning, installing, configuring, administering and troubleshooting Windows Server 2008 environments.
Jsp
This document provides an introduction and overview of a course on Java Server Pages (JSP) technology. The course will explore the main concepts of JSP through hands-on exercises, covering JSP architecture, the lifecycle of JSP pages, JSP syntax, and how to connect JSP pages to databases. The 6-week course will also cover JSP tags, HTML forms, the JavaServer Pages Standard Tag Library (JSTL), controlling application flow, and reviewing course material. Students should be familiar with HTML, Java programming, and object-oriented concepts. The required software includes Java, Tomcat server, a text editor, and a database like Microsoft Access. The hardware requirement is a Windows computer with at least 512
Java with android
This document describes a course for developing Android applications with Java. The course will teach students how to effectively build professional mobile apps using Java and the Android SDK. Students will learn to create user interfaces, store and retrieve data, integrate apps with web services, and publish completed apps in the Android Market. The curriculum covers topics like the Android platform, application fundamentals, user interfaces, data storage, networking, and publishing apps.
J2 se
This document outlines a 40-hour Java programming course curriculum that covers fundamental programming concepts like data types, selection statements, and loops. It then covers object-oriented programming principles such as abstraction, inheritance, polymorphism, and encapsulation. The course also teaches GUI components, layout managers, and event handling, as well as relational database systems, SQL, and a JDBC project. The course is intended to teach students Java programming from basic syntax to more advanced topics.
J2 se course outline
The J2SE course outline covers fundamentals of programming in Java including data types, operators, selection statements, loops, methods and arrays. It also covers object-oriented programming concepts like abstraction, inheritance, polymorphism and encapsulation. Additional topics are GUI components, layout managers, event handling, relational database systems, SQL and a JDBC project. The course duration is 40 hours.
Graphic diploma
The document outlines a graphic design curriculum covering 6 software programs: Adobe Illustrator, InDesign, Photoshop, Flash, CorelDraw, and a final project. For each program, it lists multiple lessons on tools and functions like creating shapes, logos, manipulating objects and type, enhancing images, and creating animations and publications. The total duration is 96 hours, divided among the individual programs and a final 9-hour project.
More from elshiekh1980 (19)
Recently uploaded
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
These are the slides for the presentation, "Component Testing: Bridging the gap between frontend applications" that was presented at QA or the Highway 2024 in Columbus, OH by Zachary Hamm.
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
"What does it really mean for your system to be available, or how to define w...
We will talk about system monitoring from a few different angles. We will start by covering the basics, then discuss SLOs, how to define them, and why understanding the business well is crucial for success in this exercise.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications."NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Recently uploaded (20)
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
"What does it really mean for your system to be available, or how to define w...
"What does it really mean for your system to be available, or how to define w...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Ccna
- 1. Vision for future CCNA ( 640-802 ) Curriculum Part 1 (ICND1) 1 - Interconnecting Cisco® Networking Devices Lesson 1: Building a Simple Network Exploring the Functions of Networking Securing the Network Understanding the Host-to-Host Communications Model Understanding the TCP/IP Internet Layer Understanding the TCP/IP Transport Layer Exploring the Packet Delivery Process Understanding Ethernet Connecting to an Ethernet LAN Lesson 2: Ethernet Local Area Networks Understanding the Challenges of Shared LANs Solving Network Challenges with Switched LAN Technology Exploring the Packet Delivery Process Operating Cisco IOS Software Starting a Switch Understanding Switch Security Maximizing the Benefits of Switching Troubleshooting Switch Issues Al Baraka-2 Tower Mogamaa Elmawakef St, Shebin El-Kom. Tel : 048/9102897 Customer Service : 0102502304 Email : info@ideal-generation.com Website: www.ideal-generation.com
- 2. Vision for future Lesson 3: Wireless Local Area Networks Exploring Wireless Networking Understanding WLAN Security Implementing a WLAN Lesson 4: Local Area Network Connections Exploring the Functions of Routing Understanding Binary Basics Constructing a Network Addressing Scheme Starting a Cisco Router Configuring a Cisco Router Exploring the Packet Delivery Process Understanidn Cisco Router Security Using Cisco SDM Using a Cisco Router as a DHCP Server Accessing Remove Devices Lesson 5: Wide Area Networks Connections Understanding WAN Technologies Enabling the Internet Connection Enabling Static Routing Configuring Serial Encapsulation Enabling RIP Al Baraka-2 Tower Mogamaa Elmawakef St, Shebin El-Kom. Tel : 048/9102897 Customer Service : 0102502304 Email : info@ideal-generation.com Website: www.ideal-generation.com
- 3. Vision for future Lesson 6: Network Environment Management Discovering Neighbors on the Network Managing Cisco Router Startup and Configuration Managing Cisco De Part 2 (ICND2) 2 - Interconnecting Cisco® Networking Devices Lesson 1: Small Network Implementation Lesson 2: Medium-Sized Switched Network Construction Implementing VLANs and Trunks Improving Performance with Spanning Tree Routing Between VLANs Securing the Expanded Network Troubleshooting Switched Networks Lesson 3: Medium-Sized Routed Network Construction Reviewing Routing Operations Implementing VLSM Lesson 4: Single Area OSPF Implementation Implementing OSPF Troubleshooting OSPF Al Baraka-2 Tower Mogamaa Elmawakef St, Shebin El-Kom. Tel : 048/9102897 Customer Service : 0102502304 Email : info@ideal-generation.com Website: www.ideal-generation.com
- 4. Vision for future Lesson 5: EIGRP Implementation Implementing EIGRP Troubleshooting EIGRP Lesson 6: Access Control Lists Introducing ACL Operation Configuring and Troubleshooting ACLs Lesson 7: Address Space Management Scaling the Network with NAT and PAT Transitioning to IPv6 Lesson 8: LAN Extensionin to a WAN Introducing VPN Solutions Establishing a Point-to-Point WAN Connection with PPP Establishing a WAN Connection with Frame Relay Troubleshooting Frame Relay WA Duration: 62 Hours Al Baraka-2 Tower Mogamaa Elmawakef St, Shebin El-Kom. Tel : 048/9102897 Customer Service : 0102502304 Email : info@ideal-generation.com Website: www.ideal-generation.com