This document provides instructions for removing and installing various engine components on a Caterpillar 3306 engine, including:
- Inlet and exhaust valves, springs, and related parts. Tools are needed to compress springs during removal and installation.
- Inlet and exhaust valve guides. Guides are removed and installed using driver tools, and must be installed at the proper height.
- Inlet and exhaust valve seat inserts. Inserts are removed using an extractor tool and reinstalled after cleaning the cylinder head.
- The engine oil filter base. Several gaskets and seals are replaced as the base is removed using strap wrenches.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
1. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00962627
Inlet and Exhaust Valves - Remove and Install
SMCS - 1105-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
B 8S-2263 Valve Spring Tester 1
Start By:
A. Remove the cylinder head. Refer to Disassembly and assembly, "Cylinder Head - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Illustration 1 g00490614
1. Use Tool (A) to compress valve spring (2) and remove valve keepers (1) .
2. Remove Tool (A), the rotocoil, the valve spring and the valve stem oil shield. Remove the
valve from the cylinder head. Put identification marks on the valves for installation
purposes.
Illustration 2 g00490682
3. Check the valve spring force with Tool (B). Refer to Specifications, "Cylinder Head
Valves" for information on the valve springs.
4. Perform Steps 1 through 3 for the remaining inlet and exhaust valves.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
B 5S-1322 Valve Keeper Inserter 1
2/4
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Lubricate the inlet and exhaust valves with clean engine oil. Install the inlet and exhaust
valves in the original location in the cylinder head.
Illustration 3 g00508681
2. Install valves (3), oil shield (4), valve spring (2) and rotocoil (1) in the cylinder head.
Illustration 4 g00490777
3. Use Tool (A) to compress valve spring (2). Install valve keeper (5) on the valve stem with
Tool (B) .
3/4
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. The valve keepers can be thrown from the valve when the valve spring
compressor is released. Ensure that the valve keepers are properly
installed on the valve stem. To help prevent personal injury, keep away
from the front of the valve keepers and valve springs during the
installation of the valves.
4. Carefully remove Tool (A). Strike the top of the valve with a soft faced hammer in order to
ensure that the valve keepers are properly installed.
5. Repeat Steps 3 through 4 for the remaining inlet and exhaust valves.
End By: Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove
and Install".
4/4
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00962891
Inlet and Exhaust Valve Guides - Remove and Install
SMCS - 1104-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7349 Valve Guide Driver 1
Start By:
A. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 1 g00490787
1. Use Tool (A) to remove the inlet and exhaust valve guides from the cylinder head.
2. Repeat Step 1 for the remaining inlet and exhaust valve guides.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-7349 Valve Guide Driver 1
B 9U-6954 Valve Guide Collar 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 2 g00490790
1. Put clean engine oil on the outside diameter of the valve guide. Install the valve guide with
Tool (A) and Tool (B), as shown.
Illustration 3 g00508601
2. Dimension (X) from the top of the valve guide to the cylinder head must be 22.23 ± 0.25
mm (0.875 ± 0.010 inch). For more information on the inlet and exhaust valve guides, refer
to Specifications, "Cylinder Head Valves".
Note: In order to help prevent damage to the valve guides, Tool (B) must be used during
installation.
3. Repeat Steps 1 and 2 for the remaining inlet and exhaust valve guides.
End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
3/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107684
Inlet and Exhaust Valve Seat Inserts - Remove and Install
SMCS - 1103-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4805 Valve Seat Extractor Tool Group 1
Start By:
A. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00490857
1. Use Tooling (A) in order to remove the valve seat insert from the cylinder head.
2. Clean the valve seat in the cylinder head. Remove any rough areas from the valve seat in the
cylinder head.
3. Repeat Steps 1 and 2 for the remaining inlet valve seat inserts and exhaust valve seat inserts.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 6V-4805 Valve Seat Extractor Tool Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 2 g00508515
1. Shrink the new valve insert with reduced temperature. Use Tooling (A) in order to install
the new valve seat insert in the cylinder head.
Note: Do not increase the diameter of the extractor in the valve seat insert when the insert is
installed in the cylinder head.
2. Repeat Step 1 for the remaining inlet valve seat inserts and exhaust valve seat inserts.
End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
3/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00981264
Engine Oil Filter Base - Remove
SMCS - 1306-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
1/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00499430
1. Remove the oil filter from engine oil filter base (1) with Tool (A).
Illustration 2 g00499568
2. Remove bolts (5), tube assembly (3) and the gasket. Remove the O-ring seal in tube
assembly (3) and replace the O-ring seal, if necessary.
3. Remove the bolts that hold tube assembly (4) to the cylinder block. Remove tube assembly
(4) and the gasket. Remove the O-ring seal in tube assembly (4) and replace the O-ring seal,
if necessary.
4. Remove four bolts (2) and engine oil filter base (1) from the cylinder block. Remove the O-
ring seals from engine oil filter base (1), if necessary.
2/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00983225
Engine Oil Filter Base - Disassemble
SMCS - 1306-015
Disassembly Procedure
Start By:
A. Remove the engine oil filter and the engine oil filter base. Refer to Disassembly and
Assembly, "Engine Oil Filter Base - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00500551
1/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Typical Example
Illustration 2 g00500559
Typical Example
1. Remove O-ring seals (1) from the engine oil filter base. Remove four bolts (2), two covers
(3) and two gaskets (6) .
Note: Plunger (4) is for the oil filter bypass. Plunger (7) is for the engine oil cooler bypass.
2. Remove springs (5), plunger (4) and plunger (7) from the engine oil filter base.
2/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00983561
Engine Oil Filter Base - Assemble
SMCS - 1306-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00500559
1/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 2 g00500551
1. Install plunger (7), plunger (4) and springs (5) .
Note: Plunger (7) is for the engine oil cooler bypass. Plunger (4) is for the oil filter bypass.
Note: Check the condition of the O-ring seals and gaskets. If the seals or gaskets are worn
or damaged, use new parts for replacement.
2. Install two gaskets (6), two covers (3), four bolts (2) and O-ring seals (1) .
End By: Install the engine oil filter base and the oil filter. Refer to Disassembly and Assembly,
"Engine Oil Filter Base - Install".
2/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00981970
Engine Oil Filter Base - Install
SMCS - 1306-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Check the condition of the O-ring seals and the gaskets. If the seals or the gaskets are worn
or damaged, use new parts for replacement.
1/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 1 g00499568
Note: Coat all of the O-ring seals with clean engine oil prior to installation.
2. Put the O-ring seals on engine oil filter base (1). Install engine oil filter base (1) on the
cylinder block with four bolts (2) .
3. Put the O-ring seal and the gasket in position on tube assembly (4). Install tube assembly (4)
on the cylinder block. Install the bolts that hold tube assembly (4) in position.
4. Put the O-ring seal and the gasket in position on tube assembly (3). Fasten the clip to tube
assembly (4). Position tube assembly (3) onto the cylinder block and install bolts (5).
Illustration 2 g00499430
5. Install engine oil filter (1) with Tool (A) .
Note: Follow the installation procedure on the engine oil filter in order to install the engine
oil filter on the engine oil filter base.
2/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01111322
Engine Oil Cooler - Remove
SMCS - 1378-011
3304B Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g00590134
3304B engine
(1) Remove bolts (4), elbow (5) and the gasket from the engine block.
(2) Remove oil cooler (2) and the gasket.
(3) If necessary, loosen clamp (1), and remove pipe (7) from the engine.
3306B Removal Procedure
Start By:
A. Remove the engine oil filter and the engine oil filter base. Refer to Disassembly and
Assembly, "Engine Oil Filter Base - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
2/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Dispose of all fluids according to local regulations and mandates.
Illustration 2 g00468427
1. Loosen two hose clamps (1) .
Illustration 3 g00468428
2. Disconnect hose assembly (5). Disconnect clip (3) for the engine oil level gauge. Remove
three bolts (4) and remove engine oil cooler (2).
3/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921081
Engine Oil Cooler - Disassemble
SMCS - 1378-015
Disassembly Procedure
Start By:
A. Remove the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00470817
1/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 1. Remove pipe (1), two elbows (2) and bonnet (3) from cooler core (4) .
Illustration 2 g00470818
2. Clean the tubes of cooler core (4) with 3.96 mm (.156 inch) rod (5) .
Note: The O-ring seals should be removed and inspected for damage. If the O-ring seals are
worn or damaged, use new parts for replacement.
2/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921158
Engine Oil Cooler - Assemble
SMCS - 1378-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Before assembly, check the condition of the gaskets and the O-ring seals. If the
gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 1 g00470817
1/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 1. Install bonnet (3), two elbows (2) and pipe (1) on oil cooler core (4) .
End By: Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler -
Install".
2/2
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Product: TRACK LOADER
Model: 973 TRACK LOADER 26Z
Configuration: 973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01111458
Engine Oil Cooler - Install
SMCS - 1378-012
3304B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts for
replacement.
1/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 1 g00590134
(1) Position pipe (7) on the engine block. Install bolts (4) and clamp (1).
(2) Place oil cooler (2) and the gasket in position on the pipe (7). Install bolts (4).
End By: Install the engine oil filter and the engine oil filter base. Refer to Disassembly and
Assembly, "Engine Oil Filter Base - Install".
3306B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
2/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
29. Illustration 2 g00468428
1. Install engine oil cooler (2) and three bolts (4). Connect clip (3) for the engine oil level
gauge. Connect hose assembly (5) .
Illustration 3 g00468427
2. Tighten two hose clamps (1) .
End By: Install the engine oil filter and the engine oil filter base. Refer to Disassembly and
Assembly, "Engine Oil Filter Base - Install".
3/3
973 LGP TRACK LOADER 26Z00001-UP (MACHINE) POWERED BY 3306 ENGI...
2021/12/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...