This document provides instructions for disassembling and assembling components of the front and rear axle housings for a 438C BACKHOE LOADER. It describes removing components such as planetary carriers, hubs, gears, bearings, seals and pins. Care is advised to contain fluids and note placement of parts like shims. Detailed steps are provided with notes and torque specifications for reassembling the components.
Caterpillar cat 330 c l excavator (prefix mca) service repair manual (mca0000...hhjsekmdmm
1) The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
3) It then describes 23 steps for assembling the travel motor, including installing seals, plates, springs, and tightening bolts to the specified torques.
Caterpillar cat 140 h motor grader (prefix xzh) service repair manual (xzh000...fusjejfksemem
The document provides instructions for removing the parking brake from a 140H Motor Grader. It is a 26 step process that includes draining transmission oil, removing guards and universal joints, releasing air pressure, and removing bolts, plugs, seals, springs, discs, and other components from the parking brake housing and transmission. Tools required include a transmission jack. Precautions are provided regarding cleaning components and plugging openings to prevent contamination during removal.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix tpb) service...fujsjekkekmme
This document provides instructions for removing the front track roller frame from a D11T track-type tractor. It outlines 26 steps, including lifting the machine, draining oil, removing bolts and plates, and using various tools to detach the frame. Proper safety precautions are noted due to the frame's large weight of approximately 9979 kg. Once detached, additional components like seals and bearings can be removed from the frame as needed.
Caterpillar cat 330 c l excavator (prefix jab) service repair manual (jab0000...hhjsekmdmm
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 f ln excavator (prefix kfa) service repair manual (kfa000...fksjksmmde
The document provides instructions to remove the rear power take-off (RPTO) from an excavator engine. It involves removing gears, hubs, adapters and sleeve bearings from the flywheel housing using press tools. O-rings and seals should also be replaced before installing the components in reverse order. Proper alignment of oil holes and lubrication of parts is important for correct installation.
Caterpillar cat 312 c excavator (prefix cba) service repair manual (cba00001 ...fjskkksmemm
This document provides instructions for removing and installing the engine oil bypass valve on Caterpillar 312C and 312C L excavators. It describes removing the threaded plug, shim, spring, and spring seat from the cylinder block. When installing, the spring seat, spring, shim, and threaded plug are reinstalled and tightened to the specified torque. The document also notes steps for checking components and adjusting valve opening pressure.
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...ufjjsjekkmdme
The document provides instructions for disassembling components of an axle housing, including:
1. Removing the axle housing, axle shafts, wheel flanges, and other components. Bearings, seals, and other parts must then be removed from the housing and flanges.
2. Dismantling the service brakes in the housing by removing plates, discs, pistons, springs and other brake components.
3. Additional steps are outlined to remove a differential and bevel gear from the axle housing. Thorough cleaning is important before and during disassembly to prevent contamination of parts.
Caterpillar cat 330 f ln excavator (prefix wba) service repair manual (wba000...fksjksmmde
The document provides step-by-step instructions to disassemble a travel motor. It begins by listing required tools and fasteners. The procedures then describe how to remove 27 components of the travel motor including the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Detailed illustrations accompany each step to show how to properly disassemble the travel motor.
Caterpillar cat 330 c l excavator (prefix mca) service repair manual (mca0000...hhjsekmdmm
1) The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
3) It then describes 23 steps for assembling the travel motor, including installing seals, plates, springs, and tightening bolts to the specified torques.
Caterpillar cat 140 h motor grader (prefix xzh) service repair manual (xzh000...fusjejfksemem
The document provides instructions for removing the parking brake from a 140H Motor Grader. It is a 26 step process that includes draining transmission oil, removing guards and universal joints, releasing air pressure, and removing bolts, plugs, seals, springs, discs, and other components from the parking brake housing and transmission. Tools required include a transmission jack. Precautions are provided regarding cleaning components and plugging openings to prevent contamination during removal.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix tpb) service...fujsjekkekmme
This document provides instructions for removing the front track roller frame from a D11T track-type tractor. It outlines 26 steps, including lifting the machine, draining oil, removing bolts and plates, and using various tools to detach the frame. Proper safety precautions are noted due to the frame's large weight of approximately 9979 kg. Once detached, additional components like seals and bearings can be removed from the frame as needed.
Caterpillar cat 330 c l excavator (prefix jab) service repair manual (jab0000...hhjsekmdmm
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 f ln excavator (prefix kfa) service repair manual (kfa000...fksjksmmde
The document provides instructions to remove the rear power take-off (RPTO) from an excavator engine. It involves removing gears, hubs, adapters and sleeve bearings from the flywheel housing using press tools. O-rings and seals should also be replaced before installing the components in reverse order. Proper alignment of oil holes and lubrication of parts is important for correct installation.
Caterpillar cat 312 c excavator (prefix cba) service repair manual (cba00001 ...fjskkksmemm
This document provides instructions for removing and installing the engine oil bypass valve on Caterpillar 312C and 312C L excavators. It describes removing the threaded plug, shim, spring, and spring seat from the cylinder block. When installing, the spring seat, spring, shim, and threaded plug are reinstalled and tightened to the specified torque. The document also notes steps for checking components and adjusting valve opening pressure.
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...ufjjsjekkmdme
The document provides instructions for disassembling components of an axle housing, including:
1. Removing the axle housing, axle shafts, wheel flanges, and other components. Bearings, seals, and other parts must then be removed from the housing and flanges.
2. Dismantling the service brakes in the housing by removing plates, discs, pistons, springs and other brake components.
3. Additional steps are outlined to remove a differential and bevel gear from the axle housing. Thorough cleaning is important before and during disassembly to prevent contamination of parts.
Caterpillar cat 330 f ln excavator (prefix wba) service repair manual (wba000...fksjksmmde
The document provides step-by-step instructions to disassemble a travel motor. It begins by listing required tools and fasteners. The procedures then describe how to remove 27 components of the travel motor including the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Detailed illustrations accompany each step to show how to properly disassemble the travel motor.
Caterpillar cat 312 b l track type excavator (prefix 3fs) service repair manu...fjskkksmemm
This document provides instructions for removing and installing a flywheel on a Caterpillar 3064 engine. It describes:
1) Using various tools to remove the adapter, inner ring, and bolts securing the flywheel.
2) Lifting the flywheel off using a strap and lifting device, as it weighs 50 kg.
3) Instructions for removing the ring gear by heating and tapping it off.
4) The installation procedure lists cleaning and applying compounds before securing the flywheel back onto the crankshaft using bolts and checking the runout.
Caterpillar cat 436 c backhoe loader (prefix 8tn) service repair manual (8tn0...fusjejfskekfmsme
The document provides instructions for removing and installing camshaft bearings on a Caterpillar 3054 engine:
1. Remove the camshaft and clean the bearing areas before removing the old bearings.
2. Press or drive out the old bearings and inspect them for wear or damage.
3. Lubricate the new bearings, press or drive them into place, and check that they rotate freely without play or restriction.
Caterpillar cat 330 c fm excavator (prefix b3m) service repair manual (b3m000...hhjsekmdmm
This document contains instructions for removing and installing various components on a 330C FM Excavator including:
1) The air compressor drive gear which involves removing a nut, washer and gear from the air compressor.
2) Releasing hydraulic pressure from single or multiple circuits by moving components and levers to release pressure before disconnecting lines.
3) Removing the batteries which requires disconnecting cables and removing covers.
4) Removing the alternator which involves disconnecting wiring, removing a belt with a tool, and removing a bolt from a guard.
Caterpillar cat 330 c fm excavator (prefix b1k) service repair manual (b1k000...hfjsekekmmd
This document provides instructions for installing a camshaft on a Caterpillar 330C FM excavator engine. It begins by describing the required tools and safety precautions. The instructions then detail how to position the piston, align the camshaft gear marks, apply lubricant to the camshaft, and insert the camshaft into the cylinder block. It concludes by stating to rotate the camshaft in both directions during installation to ensure proper movement.
Caterpillar cat 330 f excavator (prefix hbt) service repair manual (hbt00001 ...fjskekdmjekm
This document provides instructions for removing and installing a front cover on a 330F excavator engine. The key steps are:
1. Remove the crankshaft pulley, fan if equipped, and front seal from the front cover.
2. Remove bolts from the front cover and housing, then remove the cover and gasket.
3. Clean the cover, housing, and install a new gasket. Use guide studs to position the cover and hand tighten bolts.
4. Align the cover and tighten the bolts. Install a new front seal. Reinstall the pulley, fan if equipped.
Caterpillar cat 330 f excavator (prefix hck) service repair manual (hck00001 ...fjskkksmemm
The document is a service repair manual that provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to fully disassemble the travel motor, removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and more. Various tools are required to remove fasteners and components. Safety precautions are provided throughout to warn of spring forces, pressurized fluids, and other hazards during disassembly.
Caterpillar cat 436 c backhoe loader (prefix 1pr) service repair manual (1pr0...fusjejfskekfmsme
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar 3054 engine. It lists the required tools and describes the steps, which include removing the V-belts, taking out the three bolts holding the pulley, and installing the pulley using the bolts. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar cat 330 d excavator (prefix eah) service repair manual (eah00001 ...hhjsekmdmm
This document provides instructions for disassembling and assembling the swing drive of 330D and 330D L excavator models. The disassembly procedure involves removing 17 parts from the swing drive including the cover, carrier assemblies, gears, and housing. The assembly procedure describes installing these 17 parts in the reverse order and includes cleaning, lubricating, and setting components into place using various tools. Proper alignment and torque specifications are noted throughout.
Caterpillar cat 312 b l track type excavator (prefix 9gr) service repair manu...fjskkksmemm
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 312B excavator engine. It describes:
1) Removing bolts and washers to detach the flywheel housing adapter, then removing the adapter.
2) Removing bolts to separate the inner ring from the flywheel, then removing the ring.
3) Lifting the flywheel out of the housing using straps and a lifting device, as it weighs 50kg.
The installation section reverses the removal steps, heating the ring gear if it was removed previously, and includes checking flywheel runout after installation.
This document provides instructions for removing and installing a pump control valve on a 725 Articulated Truck. It begins by noting safety precautions for working with hydraulic systems and outlines necessary tools. The removal procedure includes marking all lines and hoses for identification before disconnection, and disconnecting the tee fitting from the pump control valve by loosening the retaining nut. The installation procedure is not shown, but presumably involves reconnecting the tee fitting and any other disconnected components.
Caterpillar cat 416 c backhoe loader (prefix 1xr) service repair manual (1xr0...fujsjefksekmm
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. The removal procedure involves supporting the engine, removing mounting bolts from the top and sides of the housing, and lifting the housing off using lifting brackets. The installation procedure specifies cleaning mating surfaces, positioning the housing on dowels in the cylinder block, and installing mounting bolts to secure the housing. Tools required include lifting brackets and bolts of the appropriate sizes.
This document provides instructions for disassembling and assembling the front axle housing of a 438C BACKHOE LOADER. It describes removing components like the final drive planetary carrier hub, internal gear, hub, bearings and seals. It then describes assembling these components in reverse order, making sure to contain fluids, set proper bearing tolerances, and torque fasteners correctly.
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. It describes:
1) Removing bolts and the front housing, which contains gears and covers the camshaft.
2) Preparing and installing a new gasket and bolts to secure the front housing.
3) Ensuring proper alignment and torque specifications are followed for reinstallation.
The document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. To remove the front housing, bolts must be removed that fasten the housing to the cylinder block and oil pan. The front gear group and camshaft gear must first be removed. To install the front housing, a new gasket is applied with sealant and the housing is bolted back into place along with the oil pan. The front gear group and camshaft gear are then reinstalled.
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. It describes:
1) Removing bolts and the front housing, which contains gears and covers the camshaft.
2) Preparing and installing a new gasket and bolts to secure the front housing.
3) Ensuring proper alignment and torque specifications are followed for reinstallation.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in order, such as valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major components to facilitate repair or replacement of parts.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in sequential order, including valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major internal components to facilitate repair or replacement of parts.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in sequential order, including valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major internal components to facilitate repair or replacement of parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids properly. Dismantling is done in order from exterior to interior components to fully separate the transmission into its major parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids properly. Dismantling is done in order from exterior to interior components to fully separate the transmission into its major parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids to prevent spills. Detailed illustrations accompany each step.
Caterpillar cat 416 c backhoe loader (prefix 5yn) service repair manual (5yn1...fjjsekkksemm
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. The removal procedure involves removing bolts to detach the front housing from the cylinder block. The installation procedure describes replacing the gasket, applying sealant, installing bolts to secure the front housing, and ensuring proper alignment. Tools and safety precautions are also listed. The document is part of a service manual for a Caterpillar 416C backhoe loader.
Caterpillar cat 312 b l track type excavator (prefix 3fs) service repair manu...fjskkksmemm
This document provides instructions for removing and installing a flywheel on a Caterpillar 3064 engine. It describes:
1) Using various tools to remove the adapter, inner ring, and bolts securing the flywheel.
2) Lifting the flywheel off using a strap and lifting device, as it weighs 50 kg.
3) Instructions for removing the ring gear by heating and tapping it off.
4) The installation procedure lists cleaning and applying compounds before securing the flywheel back onto the crankshaft using bolts and checking the runout.
Caterpillar cat 436 c backhoe loader (prefix 8tn) service repair manual (8tn0...fusjejfskekfmsme
The document provides instructions for removing and installing camshaft bearings on a Caterpillar 3054 engine:
1. Remove the camshaft and clean the bearing areas before removing the old bearings.
2. Press or drive out the old bearings and inspect them for wear or damage.
3. Lubricate the new bearings, press or drive them into place, and check that they rotate freely without play or restriction.
Caterpillar cat 330 c fm excavator (prefix b3m) service repair manual (b3m000...hhjsekmdmm
This document contains instructions for removing and installing various components on a 330C FM Excavator including:
1) The air compressor drive gear which involves removing a nut, washer and gear from the air compressor.
2) Releasing hydraulic pressure from single or multiple circuits by moving components and levers to release pressure before disconnecting lines.
3) Removing the batteries which requires disconnecting cables and removing covers.
4) Removing the alternator which involves disconnecting wiring, removing a belt with a tool, and removing a bolt from a guard.
Caterpillar cat 330 c fm excavator (prefix b1k) service repair manual (b1k000...hfjsekekmmd
This document provides instructions for installing a camshaft on a Caterpillar 330C FM excavator engine. It begins by describing the required tools and safety precautions. The instructions then detail how to position the piston, align the camshaft gear marks, apply lubricant to the camshaft, and insert the camshaft into the cylinder block. It concludes by stating to rotate the camshaft in both directions during installation to ensure proper movement.
Caterpillar cat 330 f excavator (prefix hbt) service repair manual (hbt00001 ...fjskekdmjekm
This document provides instructions for removing and installing a front cover on a 330F excavator engine. The key steps are:
1. Remove the crankshaft pulley, fan if equipped, and front seal from the front cover.
2. Remove bolts from the front cover and housing, then remove the cover and gasket.
3. Clean the cover, housing, and install a new gasket. Use guide studs to position the cover and hand tighten bolts.
4. Align the cover and tighten the bolts. Install a new front seal. Reinstall the pulley, fan if equipped.
Caterpillar cat 330 f excavator (prefix hck) service repair manual (hck00001 ...fjskkksmemm
The document is a service repair manual that provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to fully disassemble the travel motor, removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and more. Various tools are required to remove fasteners and components. Safety precautions are provided throughout to warn of spring forces, pressurized fluids, and other hazards during disassembly.
Caterpillar cat 436 c backhoe loader (prefix 1pr) service repair manual (1pr0...fusjejfskekfmsme
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar 3054 engine. It lists the required tools and describes the steps, which include removing the V-belts, taking out the three bolts holding the pulley, and installing the pulley using the bolts. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar cat 330 d excavator (prefix eah) service repair manual (eah00001 ...hhjsekmdmm
This document provides instructions for disassembling and assembling the swing drive of 330D and 330D L excavator models. The disassembly procedure involves removing 17 parts from the swing drive including the cover, carrier assemblies, gears, and housing. The assembly procedure describes installing these 17 parts in the reverse order and includes cleaning, lubricating, and setting components into place using various tools. Proper alignment and torque specifications are noted throughout.
Caterpillar cat 312 b l track type excavator (prefix 9gr) service repair manu...fjskkksmemm
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 312B excavator engine. It describes:
1) Removing bolts and washers to detach the flywheel housing adapter, then removing the adapter.
2) Removing bolts to separate the inner ring from the flywheel, then removing the ring.
3) Lifting the flywheel out of the housing using straps and a lifting device, as it weighs 50kg.
The installation section reverses the removal steps, heating the ring gear if it was removed previously, and includes checking flywheel runout after installation.
This document provides instructions for removing and installing a pump control valve on a 725 Articulated Truck. It begins by noting safety precautions for working with hydraulic systems and outlines necessary tools. The removal procedure includes marking all lines and hoses for identification before disconnection, and disconnecting the tee fitting from the pump control valve by loosening the retaining nut. The installation procedure is not shown, but presumably involves reconnecting the tee fitting and any other disconnected components.
Caterpillar cat 416 c backhoe loader (prefix 1xr) service repair manual (1xr0...fujsjefksekmm
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. The removal procedure involves supporting the engine, removing mounting bolts from the top and sides of the housing, and lifting the housing off using lifting brackets. The installation procedure specifies cleaning mating surfaces, positioning the housing on dowels in the cylinder block, and installing mounting bolts to secure the housing. Tools required include lifting brackets and bolts of the appropriate sizes.
This document provides instructions for disassembling and assembling the front axle housing of a 438C BACKHOE LOADER. It describes removing components like the final drive planetary carrier hub, internal gear, hub, bearings and seals. It then describes assembling these components in reverse order, making sure to contain fluids, set proper bearing tolerances, and torque fasteners correctly.
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. It describes:
1) Removing bolts and the front housing, which contains gears and covers the camshaft.
2) Preparing and installing a new gasket and bolts to secure the front housing.
3) Ensuring proper alignment and torque specifications are followed for reinstallation.
The document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. To remove the front housing, bolts must be removed that fasten the housing to the cylinder block and oil pan. The front gear group and camshaft gear must first be removed. To install the front housing, a new gasket is applied with sealant and the housing is bolted back into place along with the oil pan. The front gear group and camshaft gear are then reinstalled.
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. It describes:
1) Removing bolts and the front housing, which contains gears and covers the camshaft.
2) Preparing and installing a new gasket and bolts to secure the front housing.
3) Ensuring proper alignment and torque specifications are followed for reinstallation.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in order, such as valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major components to facilitate repair or replacement of parts.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in sequential order, including valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major internal components to facilitate repair or replacement of parts.
The document provides instructions for disassembling a 428D backhoe loader transmission. It lists the required tools and begins by removing the transmission from the vehicle. It then describes removing various components in sequential order, including valve groups, filters, seals, and shafts. The goal is to disassemble the transmission into its major internal components to facilitate repair or replacement of parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids properly. Dismantling is done in order from exterior to interior components to fully separate the transmission into its major parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids properly. Dismantling is done in order from exterior to interior components to fully separate the transmission into its major parts.
The document provides instructions for disassembling the transmission of a 428D backhoe loader. It lists required tools and outlines 19 steps to remove components like valve groups, seals, filters, shafts, and more. Technicians are advised to clean parts thoroughly before disassembly and contain fluids to prevent spills. Detailed illustrations accompany each step.
Caterpillar cat 416 c backhoe loader (prefix 5yn) service repair manual (5yn1...fjjsekkksemm
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. The removal procedure involves removing bolts to detach the front housing from the cylinder block. The installation procedure describes replacing the gasket, applying sealant, installing bolts to secure the front housing, and ensuring proper alignment. Tools and safety precautions are also listed. The document is part of a service manual for a Caterpillar 416C backhoe loader.
Caterpillar cat 416 c backhoe loader (prefix 5yn) service repair manual (5yn1...fjjsekfkksefm
This document provides instructions for removing and installing the front housing on a Caterpillar 3054 engine. The removal procedure involves removing bolts to detach the front housing from the cylinder block. The installation procedure describes replacing the gasket, applying sealant, installing bolts to secure the front housing, and ensuring proper alignment. Precautions are provided to keep parts clean and contain fluids. Tools required include Loctite gasket sealant.
Similar to Caterpillar cat 438 c backhoe loader (prefix 2dr) service repair manual (2dr00001 02716) (12)
New holland l221 tier 4 b final [nem479941 ]europe skid steer loader service...fujsjexswfksekmfm
This document is a service manual for New Holland C227, C232, L221, and L228 compact track loaders and skid steer loaders that comply with Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety and environmental guidelines are provided regarding the handling and disposal of fluids and components.
New holland cx6090 elevation combine harvesters service repair manualfujsjexswfksekmfm
This document is a service manual for CNH Industrial combine harvesters and provides technical information on the machines' systems and components. It contains over 55 chapters organized into sections covering the engine, transmission, axles, hydraulics, brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, and unloading systems. Each chapter provides technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical and hydraulic components.
New holland cx760 combine harvesters service repair manualfujsjexswfksekmfm
The document provides a repair manual for New Holland CX720-CX880 combines. It details the combines' primary hydraulic power system which operates all work hydraulics and steering. The high pressure circuit is fed by a variable displacement pump and distributes oil through a mainframe valve block to components like the steering valve, drum variator control, and header height control. It also links to the hydrostatic circuit which powers the hydrostatic pump.
New holland cl560 combine harvesters service repair manualfujsjexswfksekmfm
This repair manual provides technical information for repairing and servicing New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. The manual is divided into sections covering different machine systems. Section topics include distribution systems, power production, power train, travelling, body and structure, tool positioning, and crop processing. Each section contains chapters that provide technical specifications, operational descriptions, diagnostic procedures, and service/repair instructions for the components in that system. Information is coded using ICE (Information, Classification, Equipment) to uniquely identify each technical specification or procedure and allow easy retrieval of the relevant information needed to resolve issues.
New holland c232 tier 4 b (final) north america compact track loader service ...fujsjexswfksekmfm
This document provides service information for Tier 4B engines used in New Holland C227, C232, L221, and L228 skid steer and compact track loaders. It contains over 150 sections covering the engine and all related systems, with detailed removal and installation instructions. Safety precautions are provided throughout regarding handling heavy components, draining fluids, battery connection and more.
New holland b115 ctc stage iv tractor loader backhoe service repair manualfujsjexswfksekmfm
This document is a service manual for various tractor loader backhoe models including the B100C, B110C, and B115C. It contains over 200 sections covering all major systems of the machines from the engine and transmission to hydraulics, steering, and electrical systems. Each section provides information for servicing components and repairing issues. Safety rules are also outlined to prevent personal injury and machine damage while working.
New holland b110 ctc stage iv tractor loader backhoe service repair manualfujsjexswfksekmfm
This document is a service manual for various tractor loader backhoe models including the B100C, B110C, and B115C. It contains over 200 sections covering all major systems of the machines from the engine and transmission to hydraulics, steering, and electrical systems. Each section provides information for servicing components and repairing issues. Safety precautions are outlined at the beginning regarding working on the equipment.
New holland b110 c stage iv tractor loader backhoe service repair manualfujsjexswfksekmfm
This document is a service manual for various tractor loader backhoe models including the B100C, B110C, and B115C. It contains over 200 sections covering all major systems of the machines from the engine and transmission to hydraulics, steering, and electrical systems. Each section provides information for servicing components and repairing issues. Safety precautions are outlined to prevent personal injury and machine damage while working.
New holland b100 clr backhoe loader service repair manualfujsjexswfksekmfm
This document is a service manual that contains instructions and specifications for maintenance and repair of backhoe loaders. It includes sections on safety rules, maintenance, technical specifications, dimensions and performance data. The technical specifications section provides details on the diesel engine, transmission, axles, brakes, steering, hydraulic system, buckets and tires of the backhoe loaders. The document also has sections that provide instructions for removing and installing major components like the engine, transmission, radiator and hood.
New holland b90 blr backhoe loader service repair manualfujsjexswfksekmfm
This document contains service manual sections for various backhoe loader models. It includes information on safety rules, maintenance, technical specifications, transmission systems, front axles, and other components. Technical specifications include details on the diesel engine, transmission, axles, brakes, steering, hydraulic system, buckets, tires, and machine dimensions and performance specs. The transmission and front axle sections provide specifications, lubrication instructions, removal/installation procedures, and troubleshooting guides.
New holland b90 b backhoe loader service repair manualfujsjexswfksekmfm
This document contains service manual sections for various backhoe loader models. It includes information on safety rules, maintenance, technical specifications, transmission systems, front axles, and other components. Technical specifications include details on the diesel engine, transmission, axles, brakes, steering, hydraulic system, buckets, tires, and machine dimensions and performance specs. The transmission and front axle sections provide specifications, lubrication instructions, removal/installation procedures, and troubleshooting guides.
Komatsu pc180 lc 7k crawler excavator parts catalogue manual - sn k40001 and upfujsjexswfksekmfm
This document provides part numbers and descriptions for components related to the cooling system of a Komatsu PC180LC-7K excavator with serial number K40001 and up. It includes 52 line items describing the radiator core assembly, radiator sheets, radiator frames, oil cooler, hoses, caps, plugs, bolts, washers, and other parts that make up the radiator, oil cooler, and their mounting systems.
This document provides instructions for removing and installing the transmission on a 963 Track Loader. It describes in detail the 27 steps to remove the transmission, which includes draining fluids, disconnecting lines and hoses, removing mounting hardware, and lifting the transmission out. It then describes the 15 steps to install the transmission, which involves placing it back in position, reconnecting all lines and hoses, replacing mounting hardware, and refilling fluids. The overall process is to carefully disconnect and reconnect all transmission components and connections when removing and installing the transmission.
The document provides instructions for removing and installing various engine components on a Caterpillar 963 Track Loader including:
- Balancer shafts, removing the shafts and installing new bearings
- Camshaft, removing the shaft and gear and installing replacements
- Camshaft bearings, removing old bearings and pressing in new ones
- Connecting rod bearings, taking off old bearings and replacing them
The document gives detailed step-by-step directions and diagrams to guide mechanics through the disassembly and reassembly process.
This document provides instructions for servicing components of a 963 Track Loader engine, including:
- Removing and installing the engine oil cooler, describing 11 steps
- Disassembling and assembling the oil filter base, describing removing and installing various parts
- Removing the oil pan and oil pan plate, describing 7 removal steps and 5 installation steps
- Removing and installing the oil pump, describing 4 removal steps and 5 installation steps
- Disassembling and assembling the oil pump, describing 10 disassembly steps and procedures for installing bearings and gears
Caterpillar cat 955 l track loader (prefix 13x) service repair manual (13x000...fujsjexswfksekmfm
The document provides instructions for disassembling and assembling various components of a Caterpillar 3304 vehicular engine used in a 955L track loader, including:
- Removing and installing valve lifters, pistons, valves, valve seats, water directors, and valve guides. Detailed steps are provided for each procedure.
- Disassembling and assembling pistons, including removing rings and connecting rods and installing them back on pistons.
- Guidelines are given for checking spring force on valves and grinding valve seat inserts.
The document is intended as a service repair manual for mechanics, providing maintenance and overhaul instructions for the specified engine model.
Caterpillar cat 963 b track loader (prefix 9bl) service repair manual (9bl000...fujsjexswfksekmfm
The document provides instructions for disassembling and assembling the air suspension system on a Caterpillar 963B track loader seat. It describes 22 steps to disassemble parts like the air spring, indicator, adjustment knob, and compressor. It then describes 19 steps to reassemble these parts in reverse order. Diagrams are provided to illustrate each step. Safety notices advise releasing air pressure before disassembly and wearing protective equipment when working with springs.
Caterpillar cat 955 k track loader (prefix 71j) service repair manual (71j045...fujsjexswfksekmfm
This document provides instructions for servicing the power train of a Caterpillar 955K track loader, including:
- Checking and adjusting the alignment between the engine and transmission.
- Removing and installing the transmission, torque converter, and various transmission components.
- Disassembling and assembling the planetary transmission and torque converter.
- Servicing the transmission hydraulic controls, lubrication system, and mounting adapter.
Detailed step-by-step instructions and diagrams are provided for servicing each component. Tolerances and specifications are given for checking alignments.
This document provides assembly instructions for an alternator and turbocharger. It includes 29 steps to assemble the alternator, ensuring cleanliness and proper installation of components like diodes, coils, housings and terminals. It also details removing and installing a turbocharger, including disconnecting lines, removing four bolts, installing a new gasket if needed and reconnecting lines. Further, it lists 13 steps for disassembling a turbocharger, including removing compressor and turbine wheels, bearings, seals and housing pieces, and 16 steps for reassembly, noting proper installation of snap rings, bearings, seals and alignment of components.
Caterpillar cat 953 c track loader (prefix bbx) service repair manual (bbx000...fujsjexswfksekmfm
This document provides instructions for removing and installing track components on a Caterpillar 953C track loader. It describes using various tools to loosen and separate the track. Steps include removing guards and covers, loosening the track using a hydraulic jack or pin, and lifting the machine to separate the track. Reinstallation involves aligning and bolting components in the reverse order of removal.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 438C BACKHOE LOADER 2DR
Configuration: 438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWERED BY 3054 Engine
Disassembly and Assembly
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Media Number -SENR1206-02 Publication Date -01/11/2003 Date Updated -26/02/2018
SENR12060008
Axle Housing (Front) (All Wheel Drive)
SMCS - 3260-016; 3260-015
Disassemble Axle Housing (Front) (All Wheel Drive)
Start By:
a. remove final drive planetary carrier hub
1/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during performance of inspection,
maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or disassembling any component containing
fluids. Refer to "Tools And Shop Products Guide", NENG2500 for tools and supplies suitable to
collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations
and mandates.
NOTE: Front axle removed for better photographic illustration
1. Remove eight bolts (1).
2. Remove internal gear (2) using Tooling (A).
3. Remove hub (3) from steering housing hub (4) using Tooling (B).
2/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Pry shaft seal (5) out of hub (3). If necessary, drive the two bearing outer races out of the hub
bores.
5. Remove bearing inner race from the axle housing hub (4) using Tooling (C) and Tooling (D).
6. Loosen nut (9), but do not remove from tie rod (10).
7. Push tie rod (10) out of the axle housing hub (4) using Tooling (E).
8. Remove nut (9) from tie rod (10).
3/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 9. Remove bolts (11) and king pins (12) from the top and bottom of axle housing hub (4).
10. Remove shim (13) from top king pin.
NOTE: Check king pin bearings and if needed replace them using the following procedure:
4/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. a. Press bearing inner race (14) and shaft seal (15) from the king pin using Tooling (F).
b. Press shaft seal (15) and bearing inner race (14) on the king pin using Tooling (G).
11. Attach hoist and pull complete axle housing hub (4) along with double-joint shaft (16) out of
the axle housing (17(.
5/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 12. Remove retaining ring (18) and separate double-joint shaft (16) from the axle housing hub (4).
13. Expand retainer ring (19) and separate sun gear (20) from the double-joint shaft (16).
14. Pull shaft seal (21) out of the axle housing hub (4) using Tooling (H).
15. Press sleeve and shield (22) from the double-joint shaft (16) using Tooling (F).
16. Remove the two bearing outer races out of the axle housing bores using Tooling (H).
6/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 17. Pull out shaft seal using Tooling (H).
18. Pull sleeve out of the bore using Tooling (J).
Assemble Axle Housing (Front) (All Wheel Drive)
Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during performance of inspection,
maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or disassembling any component containing
fluids. Refer to "Tools And Shop Products Guide", NENG2500 for tools and supplies suitable to
collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations
and mandates.
NOTE: Front axle removed for better photographic illustration
7/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 1. Drive sleeve in axle housing using Tooling (A).
2. Drive shaft seal, seal lip facing the oil chamber against shoulder using Tooling (B).
3. Insert the two bearing outer races in the steering housing bores until contact is obtained using
Tooling (C).
4. Press ball bearing in the bore of the axle housing hub until contact is obtained.
8/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 5. Install the retainer ring.
6. Press shaft seal with the sealing lips facing the ball bearing until seated using Tooling (D).
7. Insert shield and shaft seal in the bore of the steering housing.
8. Install sun gear (3) in double-joint (1) and install retainer ring (2).
9/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 9. Assemble shield (5) and heated sleeve (4) upon double-joint (1) and place them against
shoulder.
10. Install pre-assembled double-joint shaft (1) in the axle housing hub (6).
12. Install retainer ring to secure in double joint-shaft using Tool (E).
13. Install steering housing hub (6) with double-joint shaft in the axle housing until the double-
joint shaft splines are seated in the side gear.
14. Install 0.08 mm (.003 in) shim (7) and king pin (8) in the top of steering housing hub (6) and
install king pin without shim in the bottom of the steering housing hub.
15. Install bolts and tighten to a torque of 117 N·m (86 lb ft).
10/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) PO...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 16. While moving the steering housing back and forth use a torque wrench to check the rolling
resistance. The rolling resistance should be 18 to 20 N·m (13 to 15 lb ft). If the rolling resistance
is more than the specified value, remove shim (7) and replace it with a thicker shim. If the rolling
resistance is less than the specified value, remove shim (7) and replace it with a thinner shim.
17. Press both bearing outer races firmly against shoulder using Tool (F).
18. Press in the shaft seal with the words out side outwards (on top) until it is flush using Tool (G).
19. Assemble heated bearing inner race (9) upon the axle housing hub (6) until contact is obtained.
20. Assemble pre-assembled hub (10) to the steering housing (6) and fix it by means of heated
bearing inner race (11).
11/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) PO...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 21. Assemble internal gear (12) and install bolts (13). Tighten bolts (13) to the torque of 68 N·m
(51 lb ft).
End By:
a. install fine drive planetary carrier hub
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 9 07:32:07 UTC+0800 2019
12/12438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) PO...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 438C BACKHOE LOADER 2DR
Configuration: 438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWERED BY 3054 Engine
Disassembly and Assembly
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Media Number -SENR1206-02 Publication Date -01/11/2003 Date Updated -26/02/2018
SENR12060009
Final Drive And Axle Housing (Rear) (All Wheel Steer)
SMCS - 4050-016; 4050-015
Disassemble Final Drive And Axle Housing (Rear) (All Wheel
Steer)
Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during performance of inspection,
maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or disassembling any component containing
fluids. Refer to "Tools And Shop Products Guide", NENG2500 for tools and supplies suitable to
collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations
and mandates.
NOTE: For photographic purposes, the all wheel steer axle has been removed from the machine.
1/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. NOTE: The left and right axle housing assemblies are identical. All operations covered in this
section must be performed on both the right and the left axle housing assemblies.
1. Secure axle assembly to tooling (A) prior to starting any work.
2. Loosen plug (1) in final drive and drain oil in suitable container.
2/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 3. Loosen two socket head bolts (2) and separate the planetary carrier (3) from hub (4). Attach
strap and remove carrier (3). Approximate weight is 34 kg (75 lb).
4. Remove snap ring (5).
5. Install tooling (B) and remove planetary gears (6).
6. Remove snap ring (7) and remove thrust washer (8).
3/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. 7. Loosen both hex head screws (9) and remove lock plate (10).
8. Using tooling (C) loosen and remove slotted nut (11).
9. Separate internal gear (12) from steering knuckle housing (13).
10. Using tooling (D), separate hub (14) from steering knuckle housing (13).
4/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 11. Remove bearing (15), O-ring (16), and bearing race (17) from hub (14).
12. Turn hub (13) over and pry out seal ring (18) and remove bearing race (19) from bore of hub
(14).
13. Using tooling (C) remove bearing and bearing inner race (20) from steering knuckle housing
(13).
14. Remove snap ring (21).
5/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 15. Remove two thrust washers (22).
16. Measure the the distance (X) between the bottom of adjustment nut (23) and the top of bolt
(24). Record this measurement for assembly purposes and remove nut and bolt (23) and (24).
17. Remove cotter key (25) and loosen castle nut (26).
18. Install tooling (E) remove tie rod end (27) from bore.
6/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 19. Remove four bolts (28). Remove two plastic caps and install two forcing screws.
20. Attach suitable lifting device to steering knuckle housing. Apply pressure to forcing screws
and remove bearing and pin (29) using forcing screws.
21. Install forcing screws to the lower bearing and pin (30) and remove remove second bearing
and pin (30).
7/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. NOTE: It is important to note the placement of shims (33). Retain the proper shim with its
corresponding pin.
22. Separate bearing (31), O-ring (32), shims (33) from pin (29) or (30) on both the top and
bottom for both sides.
23. Remove steering knuckle housing (13) from the axle.
24. Remove seal (34) from steering knuckle housing bore.
NOTE: It may be necessary to destroy seal to remove it.
25. Remove bushing (35) from knuckle housing bore.
NOTE: The direction of the grooves in bushing (35) are important. The direction of these grooves
are important for proper lubrication of the axle shaft. It will be necessary to replace this bushing in
exactly the same manner.
8/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 26. Remove both bearing races (36) and (37) out of the axle housing.
27. Remove axle shaft and sun gear (38) with both universals from the axle housing.
28. Remove snap ring (39) from axle shaft (38).
NOTE: It may be necessary to destroy seal to remove it.
9/23438C Backhoe Loader Side Shift, Parallel Lift 2DR00001-02716 (MACHINE) POWE...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...