This document provides instructions for disassembling and assembling a travel motor and final drive for Caterpillar 336F L and 336F LN excavators. It lists required tools and parts and includes diagrams illustrating the 27 steps to assemble the travel motor. These include installing seals, springs, plates, and fasteners in the proper sequence and orientation. The instructions also describe removing the final drive and travel motor as a unit and then separating the individual components.
Caterpillar cat 336 f l excavator (prefix zbj) service repair manual (zbj0000...fjsjekdmmeme
This document provides instructions for servicing the travel motor on Caterpillar 336F L and 336F LN excavators. It describes the disassembly and assembly procedures, which include 27 individual steps. The document lists required tools and includes illustrations to clarify each step. The summary is:
1. The document provides a service repair manual for Caterpillar 336F L and 336F LN excavators, outlining the process for travel motor disassembly and assembly in 27 steps.
2. Illustrations and lists of required tools accompany the step-by-step instructions.
3. Reassembly requires applying sealant and torquing bolts to the specified values.
Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj000...fjsjekdmmeme
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators. It lists the required tools and parts and includes illustrations of each step. The assembly procedure involves installing seals, springs, pistons, bearings, and other components in the proper order. The disassembly and removal process describes draining fluid, disconnecting hoses, and using lifting devices to remove the final drive and travel motor assembly.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...zatao0179249295
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly involving installation of seals, springs, pistons and other components. For removal, it outlines 13 steps including draining fluid, disconnecting hoses, and removing bolts to separate the final drive, travel motor and coupling. Tools required are listed for both assembly and removal procedures.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...luanxianshi27
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...wfu089267
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly and 13 steps for removal of the final drive and travel motor. Tools required are listed in tables. Safety precautions are provided to prevent injury from hydraulic pressure.
Caterpillar cat 336 f l excavator (prefix zbj) service repair manual (zbj0000...fjsjekdmmeme
This document provides instructions for servicing the travel motor on Caterpillar 336F L and 336F LN excavators. It describes the disassembly and assembly procedures, which include 27 individual steps. The document lists required tools and includes illustrations to clarify each step. The summary is:
1. The document provides a service repair manual for Caterpillar 336F L and 336F LN excavators, outlining the process for travel motor disassembly and assembly in 27 steps.
2. Illustrations and lists of required tools accompany the step-by-step instructions.
3. Reassembly requires applying sealant and torquing bolts to the specified values.
Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj000...fjsjekdmmeme
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators. It lists the required tools and parts and includes illustrations of each step. The assembly procedure involves installing seals, springs, pistons, bearings, and other components in the proper order. The disassembly and removal process describes draining fluid, disconnecting hoses, and using lifting devices to remove the final drive and travel motor assembly.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...zatao0179249295
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly involving installation of seals, springs, pistons and other components. For removal, it outlines 13 steps including draining fluid, disconnecting hoses, and removing bolts to separate the final drive, travel motor and coupling. Tools required are listed for both assembly and removal procedures.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...luanxianshi27
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...wfu089267
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly and 13 steps for removal of the final drive and travel motor. Tools required are listed in tables. Safety precautions are provided to prevent injury from hydraulic pressure.
Clark GPH 60 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal or severe operation. Records of inspections indicate maintenance needed and help set proper intervals tailored to each application. Critical checks include visual inspections, lubrication, fluid levels, belts, hoses, brakes, and adjustments.
Clark GPH 50 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal operation of 8 hours indoors or severe operation outdoors in dirty conditions. Records of inspections indicate maintenance needed to keep trucks running safely and efficiently.
Clark GPH 70 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal operation of 8 hours indoors or severe operation outdoors in dirty conditions. Records of inspections indicate maintenance needed to keep trucks running safely and efficiently.
Clark ECG20-30X Forklift Service Repair Manual.pdffjdkksmemd
Lifting, jacking, and blocking the truck must be done safely to prevent injury or equipment damage. The drive wheels must be raised using a hydraulic jack with safety stands. Working under a raised truck requires safety stands under the frame. The entire truck can be raised using an overhead hoist and slings under the frame. Shipping requires tie-down straps over the uprights and around the frame.
Clark EPG20-30 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and safety guidelines for maintaining lift trucks. It discusses identifying and understanding safety signs, recommended safe maintenance practices, and general shop precautions. Safe practices include only allowing trained personnel to perform maintenance, following manufacturer recommendations, properly preparing the work area, and taking safety precautions like disconnecting batteries before working on electrical systems.
Clark EPG 15-18 Forklift Service Repair Manual.pdffjdkksmemd
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark ECG20-32 Forklift Service Repair Manual.pdffjdkksmemd
Lifting, jacking, and blocking the truck must be done safely to prevent injury or equipment damage. The drive wheels must be raised using a hydraulic jack with safety stands. Working under a raised truck requires safety stands under the frame. The entire truck can be raised using an overhead hoist and slings under the frame. Shipping requires tie-down straps over major components.
Clark DPH 60 Forklift Service Repair Manual.pdffjdkksmemd
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends maintaining records using a provided report form. The summary describes inspection and maintenance tasks categorized into groups like:
1. Performing a visual inspection and checking for leaks, loose fasteners, and ensuring safety decals are intact.
2. Inspecting components like the carriage, forks, wheels, and hydraulic connections.
3. Testing functions like the horn, lights, brakes, hydraulic controls and steering while the engine is running.
4. Checking fluid levels, filters, belts, and hoses and performing scheduled fluid changes.
Clark DPH 75 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for damage, leaks, loose parts, and worn components.
2. Testing functions like the starting system, gauges, controls, lift mechanisms, and accessories to ensure proper operation.
3. Inspecting specific systems and components, such as the engine, wheels and tires, brakes, hydraulic and electrical systems, and looking for issues that require repair or adjustment.
4. Documenting inspection results
Clark C500, Y350 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their inspection findings and any needed repairs. Safety precautions are listed, such as disconnecting the battery before working on electrical components. A visual inspection of the entire truck is described, including components like the overhead guard, carriage, forks, and hydraulic and electrical systems.
Clark DPH 70 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for issues like leaks, loose fasteners, and worn/damaged components.
2. Using a maintenance report form to document inspections and any needed repairs.
3. Testing functions like the starting system, gauges, controls, brakes and steering to ensure proper operation.
4. Inspecting and lubricating specific components, such as the engine, hydraulic and electrical systems, wheels/
Clark DPH 50 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for issues like leaks, loose fasteners, and worn/damaged components.
2. Using a planned maintenance report form to document inspections and any needed repairs.
3. Testing functions like the starting system, gauges, controls, brakes and steering to ensure proper operation.
4. Inspecting and lubricating specific components, like the engine, hydraulic and electrical systems, wheels/
Clark C500, Y300S Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and maintenance procedures for Clark lift trucks. It begins with introductory information on safety signs, user safe maintenance practices, and how to perform periodic maintenance using the provided report form. The bulk of the document consists of an index that lists maintenance groups and sections to guide the user through the maintenance process. Safety is emphasized throughout with warnings and cautions provided where potentially hazardous situations may occur.
Clark CMP 50S Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark C500, Y300L Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their visual inspections of components like the overhead guard, carriage, forks, and hydraulic and electrical systems. Safety precautions are also described, such as disconnecting the battery before working on electrical components. The document is intended to help technicians safely and properly complete routine maintenance.
Clark CGP 70 Forklift Service Repair Manual.pdffjdkksmemd
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CMP 45 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CMP 40 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CGC 70 Forklift Service Repair Manual.pdffjdkksmemd
This document provides information about periodic maintenance schedules for Clark lift trucks. It discusses the terms "periodic service" and "planned maintenance" and how they relate to regularly scheduled maintenance tasks. It provides details on determining appropriate maintenance intervals based on operating conditions. The document includes a service chart that indicates basic maintenance tasks and recommended intervals. It also includes a recommended periodic service schedule chart that lists specific maintenance tasks, the suggested time intervals to complete them, and the service manual group where the task is covered.
Clark CGP 40 Forklift Service Repair Manual.pdffjdkksmemd
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark GPH 60 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal or severe operation. Records of inspections indicate maintenance needed and help set proper intervals tailored to each application. Critical checks include visual inspections, lubrication, fluid levels, belts, hoses, brakes, and adjustments.
Clark GPH 50 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal operation of 8 hours indoors or severe operation outdoors in dirty conditions. Records of inspections indicate maintenance needed to keep trucks running safely and efficiently.
Clark GPH 70 Forklift Service Repair Manual.pdffjdkksmemd
Planned maintenance is important for the long life and trouble-free operation of lift trucks. Regular inspections and lubrication on established intervals can help prevent major problems. Time intervals in maintenance manuals are based on operating hours and condition classifications like normal operation of 8 hours indoors or severe operation outdoors in dirty conditions. Records of inspections indicate maintenance needed to keep trucks running safely and efficiently.
Clark ECG20-30X Forklift Service Repair Manual.pdffjdkksmemd
Lifting, jacking, and blocking the truck must be done safely to prevent injury or equipment damage. The drive wheels must be raised using a hydraulic jack with safety stands. Working under a raised truck requires safety stands under the frame. The entire truck can be raised using an overhead hoist and slings under the frame. Shipping requires tie-down straps over the uprights and around the frame.
Clark EPG20-30 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and safety guidelines for maintaining lift trucks. It discusses identifying and understanding safety signs, recommended safe maintenance practices, and general shop precautions. Safe practices include only allowing trained personnel to perform maintenance, following manufacturer recommendations, properly preparing the work area, and taking safety precautions like disconnecting batteries before working on electrical systems.
Clark EPG 15-18 Forklift Service Repair Manual.pdffjdkksmemd
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark ECG20-32 Forklift Service Repair Manual.pdffjdkksmemd
Lifting, jacking, and blocking the truck must be done safely to prevent injury or equipment damage. The drive wheels must be raised using a hydraulic jack with safety stands. Working under a raised truck requires safety stands under the frame. The entire truck can be raised using an overhead hoist and slings under the frame. Shipping requires tie-down straps over major components.
Clark DPH 60 Forklift Service Repair Manual.pdffjdkksmemd
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends maintaining records using a provided report form. The summary describes inspection and maintenance tasks categorized into groups like:
1. Performing a visual inspection and checking for leaks, loose fasteners, and ensuring safety decals are intact.
2. Inspecting components like the carriage, forks, wheels, and hydraulic connections.
3. Testing functions like the horn, lights, brakes, hydraulic controls and steering while the engine is running.
4. Checking fluid levels, filters, belts, and hoses and performing scheduled fluid changes.
Clark DPH 75 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for damage, leaks, loose parts, and worn components.
2. Testing functions like the starting system, gauges, controls, lift mechanisms, and accessories to ensure proper operation.
3. Inspecting specific systems and components, such as the engine, wheels and tires, brakes, hydraulic and electrical systems, and looking for issues that require repair or adjustment.
4. Documenting inspection results
Clark C500, Y350 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their inspection findings and any needed repairs. Safety precautions are listed, such as disconnecting the battery before working on electrical components. A visual inspection of the entire truck is described, including components like the overhead guard, carriage, forks, and hydraulic and electrical systems.
Clark DPH 70 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for issues like leaks, loose fasteners, and worn/damaged components.
2. Using a maintenance report form to document inspections and any needed repairs.
3. Testing functions like the starting system, gauges, controls, brakes and steering to ensure proper operation.
4. Inspecting and lubricating specific components, such as the engine, hydraulic and electrical systems, wheels/
Clark DPH 50 Forklift Service Repair Manual.pdffjdkksmemd
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for issues like leaks, loose fasteners, and worn/damaged components.
2. Using a planned maintenance report form to document inspections and any needed repairs.
3. Testing functions like the starting system, gauges, controls, brakes and steering to ensure proper operation.
4. Inspecting and lubricating specific components, like the engine, hydraulic and electrical systems, wheels/
Clark C500, Y300S Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and maintenance procedures for Clark lift trucks. It begins with introductory information on safety signs, user safe maintenance practices, and how to perform periodic maintenance using the provided report form. The bulk of the document consists of an index that lists maintenance groups and sections to guide the user through the maintenance process. Safety is emphasized throughout with warnings and cautions provided where potentially hazardous situations may occur.
Clark CMP 50S Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark C500, Y300L Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their visual inspections of components like the overhead guard, carriage, forks, and hydraulic and electrical systems. Safety precautions are also described, such as disconnecting the battery before working on electrical components. The document is intended to help technicians safely and properly complete routine maintenance.
Clark CGP 70 Forklift Service Repair Manual.pdffjdkksmemd
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CMP 45 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CMP 40 Forklift Service Repair Manual.pdffjdkksmemd
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CGC 70 Forklift Service Repair Manual.pdffjdkksmemd
This document provides information about periodic maintenance schedules for Clark lift trucks. It discusses the terms "periodic service" and "planned maintenance" and how they relate to regularly scheduled maintenance tasks. It provides details on determining appropriate maintenance intervals based on operating conditions. The document includes a service chart that indicates basic maintenance tasks and recommended intervals. It also includes a recommended periodic service schedule chart that lists specific maintenance tasks, the suggested time intervals to complete them, and the service manual group where the task is covered.
Clark CGP 40 Forklift Service Repair Manual.pdffjdkksmemd
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i07175112
Travel Motor - Assemble
SMCS - 4351-016
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:52:56 UTC+0800 2020
10/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 E...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
1/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
3/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
4/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
5/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:53:51 UTC+0800 2020
6/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i03885522
Final Drive - Disassemble
SMCS - 4050-015
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
1/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 1 g02131413
1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:54:47 UTC+0800 2020
8/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i05103849
Final Drive - Assemble
SMCS - 4050-016
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
1/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. L 8T-9206 Seal Installer 1
Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...