This document provides instructions for disassembling and assembling the travel motor on a Cat 336F L excavator. The disassembly process involves removing 30 individual parts from the travel motor in 27 steps. Key steps include removing the motor head assembly, piston assemblies, barrel assembly, swashplate, and shaft assembly. The assembly process reverses the disassembly with 29 steps and provides illustrations to aid in correctly reinstalling each part in the proper orientation. Safety precautions are noted regarding parts under spring tension.
This document provides instructions for disassembling and assembling the travel motor on 336F and 336F L Excavator models. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process provides instructions in reverse order with 27 steps to reassemble the travel motor. Tools required are listed for both the disassembly and assembly procedures.
This document provides instructions for disassembling and assembling the travel motor on 336F and 336F L Excavator models. The disassembly process involves 30 steps to remove components like springs, seals, plates, and assemblies. Tools and safety precautions are listed. The assembly process reverses the disassembly with 27 steps and also lists required tools.
This document provides instructions for disassembling and assembling the travel motor of a 336F excavator. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process reverses the disassembly with 27 steps and requires various tools to reinstall components in the proper order and orientation. Precautions are outlined to prevent injury from spring forces.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...djdksmmdmd
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and plates. Special care must be taken when handling springs to avoid injury. Tools required include wrenches, pliers, presses, and specialty Caterpillar tools.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...didkkmmdm
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly, instructing technicians to install parts like seals, springs, and retaining rings back into the travel motor in the proper order and orientation. Precautions are provided to contain fluids and release spring forces safely.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...f8uejkdkdmm3e
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to warn of potential injuries from springs under pressure. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...shun96145luo
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and notches. Special care must be taken when removing or installing components under spring pressure to avoid injury.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...f7useijdkdmd1
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
This document provides instructions for disassembling and assembling the travel motor on 336F and 336F L Excavator models. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process provides instructions in reverse order with 27 steps to reassemble the travel motor. Tools required are listed for both the disassembly and assembly procedures.
This document provides instructions for disassembling and assembling the travel motor on 336F and 336F L Excavator models. The disassembly process involves 30 steps to remove components like springs, seals, plates, and assemblies. Tools and safety precautions are listed. The assembly process reverses the disassembly with 27 steps and also lists required tools.
This document provides instructions for disassembling and assembling the travel motor of a 336F excavator. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process reverses the disassembly with 27 steps and requires various tools to reinstall components in the proper order and orientation. Precautions are outlined to prevent injury from spring forces.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...djdksmmdmd
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and plates. Special care must be taken when handling springs to avoid injury. Tools required include wrenches, pliers, presses, and specialty Caterpillar tools.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...didkkmmdm
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly, instructing technicians to install parts like seals, springs, and retaining rings back into the travel motor in the proper order and orientation. Precautions are provided to contain fluids and release spring forces safely.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...f8uejkdkdmm3e
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to warn of potential injuries from springs under pressure. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...shun96145luo
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and notches. Special care must be taken when removing or installing components under spring pressure to avoid injury.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...f7useijdkdmd1
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...shibi1322
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to warn of potential injuries from spring forces. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...fucheng89
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to prevent injury from parts under spring pressure. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...8foskkdjdkdm3e
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly, instructing technicians to install parts like seals, springs, and retaining rings back into the travel motor in the proper order and orientation. Safety precautions are provided throughout to warn of potential injuries from released spring forces.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...jiazhi27185
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to prevent injury from parts under spring tension. Tools required are also listed.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekkdmnem
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fhhjsjekmdme
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 individual parts from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like keys and plates. Special care must be taken when handling springs to avoid injury. Tools required include wrenches, pliers, presses, and specialty Caterpillar tools.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...fjdkksmemd
This document provides disassembly and assembly instructions for the travel motor of a 336F L excavator. The disassembly process involves removing 30 components of the travel motor in a specific sequence. This includes removing springs, seals, plates, pistons, and the motor head assembly. The assembly process reverses this, involving installing 30 components back into the travel motor in the proper sequence and orientation, taking care to lubricate parts and apply locking agents as specified. Tools required for disassembly and assembly are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...f7siejdkdmd
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...yin9niaojiao
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different components of the travel motor in 29 steps. Precautions are provided to safely release spring forces. The assembly process reverses the disassembly steps and includes lubricating seals before installing. Tools required are listed for both the disassembly and assembly procedures.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...dxem8295569
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and notches. Special care must be taken when handling springs to avoid injury. Tools required include lifting devices, presses, pliers and drivers.
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components in reverse order and noting proper positioning and torque specifications. Tools required include a transmission repair stand, lifting eyes, bolts, drivers, retaining ring pliers, and Loctite. Personal safety precautions are noted for spring-loaded components.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...zatao0179249295
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
This document provides instructions for disassembling and assembling the travel motor on 336F L and 336F LN Excavator models. It outlines 30 steps to disassemble the travel motor by removing components like caps, springs, spools, plugs, relief valves and more. It then outlines 29 steps for reassembling the travel motor by installing components like O-rings, seals, pistons, springs, plates and more back into their original positions. Tools required are also listed. The goal is to properly disassemble and reassemble the travel motor while containing fluids and following safety precautions.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...luanxianshi27
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...wfu089267
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting devices, presses, pliers, and loctite. Safety precautions are provided to avoid injury from released springs or striking by parts.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar Cat 349F L Excavator (Prefix TEW) Service Repair Manual (TEW00001...zatao0179249295
The document provides instructions to disassemble and assemble the travel motor of 349F and 349F L excavators. It describes 31 steps to disassemble the travel motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It then describes assembling the motor in reverse order, noting specifications like part numbers, torque values, and lubrication points to reinstall components in their original positions.
Caterpillar Cat 349F L Excavator (Prefix KEA) Service Repair Manual (KEA00001...zatao0179249295
The document provides instructions for disassembling and assembling the travel motor of a 349F L excavator. It lists 30 steps to disassemble the motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It also provides specifications for assembling the motor, such as torque specifications for plugs and bolts, and notes on lubricating sliding surfaces before assembly. The goal is to take the motor apart in a specific sequence and then rebuild it correctly using the provided specifications.
Caterpillar Cat 349F L Excavator (Prefix HPD) Service Repair Manual (HPD00001...zatao0179249295
This document provides instructions for disassembling the travel motor on 349F and 349F L Excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations are provided for each step along with safety notices and required tools. The goal is to break down the travel motor into its core components for repair or replacement.
Caterpillar Cat 349F L Excavator (Prefix HLB) Service Repair Manual (HLB00001...zatao0179249295
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L Excavators. It describes 31 steps to disassemble the travel motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It also provides specifications for components like plug torque values and spring dimensions to follow when reassembling the travel motor in reverse order.
Caterpillar Cat 349F L Excavator (Prefix BZ2) Service Repair Manual (BZ200001...zatao0179249295
This document provides instructions for disassembling the travel motor on 349F and 349F L Excavator models. It describes 27 steps to fully disassemble the travel motor, including draining fluids, removing housing components, plates, seals, bearings, and other internal parts. Various tools are required, and safety precautions are provided to remove parts under spring tension. The goal is to break down the travel motor into its core components to facilitate repair or replacement of parts.
More Related Content
Similar to Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001 and up).pdf
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...shibi1322
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to warn of potential injuries from spring forces. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...fucheng89
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to prevent injury from parts under spring pressure. Tools required are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...8foskkdjdkdm3e
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly, instructing technicians to install parts like seals, springs, and retaining rings back into the travel motor in the proper order and orientation. Safety precautions are provided throughout to warn of potential injuries from released spring forces.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...jiazhi27185
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 components from the travel motor in 30 steps. The assembly process reverses the disassembly steps and involves installing the components back into the travel motor in 19 steps. Safety precautions are provided to prevent injury from parts under spring tension. Tools required are also listed.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekkdmnem
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fhhjsjekmdme
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 individual parts from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like keys and plates. Special care must be taken when handling springs to avoid injury. Tools required include wrenches, pliers, presses, and specialty Caterpillar tools.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...fjdkksmemd
This document provides disassembly and assembly instructions for the travel motor of a 336F L excavator. The disassembly process involves removing 30 components of the travel motor in a specific sequence. This includes removing springs, seals, plates, pistons, and the motor head assembly. The assembly process reverses this, involving installing 30 components back into the travel motor in the proper sequence and orientation, taking care to lubricate parts and apply locking agents as specified. Tools required for disassembly and assembly are also listed.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...f7siejdkdmd
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different parts from the travel motor in 29 steps. Key steps include removing the motor head assembly, piston assembly, barrel assembly, and swashplate. The assembly process reverses the disassembly with 30 steps to reinstall the parts in the proper order and orientation, applying lubricants and fasteners as needed. Safety precautions are provided to warn of spring loads that could cause injury.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual Instant D...yin9niaojiao
This document provides instructions for disassembling and assembling the travel motor of a 336F L Excavator. The disassembly process involves removing 30 different components of the travel motor in 29 steps. Precautions are provided to safely release spring forces. The assembly process reverses the disassembly steps and includes lubricating seals before installing. Tools required are listed for both the disassembly and assembly procedures.
Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001...dxem8295569
This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and notches. Special care must be taken when handling springs to avoid injury. Tools required include lifting devices, presses, pliers and drivers.
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components in reverse order and noting proper positioning and torque specifications. Tools required include a transmission repair stand, lifting eyes, bolts, drivers, retaining ring pliers, and Loctite. Personal safety precautions are noted for spring-loaded components.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...zatao0179249295
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
This document provides instructions for disassembling and assembling the travel motor on 336F L and 336F LN Excavator models. It outlines 30 steps to disassemble the travel motor by removing components like caps, springs, spools, plugs, relief valves and more. It then outlines 29 steps for reassembling the travel motor by installing components like O-rings, seals, pistons, springs, plates and more back into their original positions. Tools required are also listed. The goal is to properly disassemble and reassemble the travel motor while containing fluids and following safety precautions.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...luanxianshi27
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting eyes, drivers, retaining ring pliers, and presses. Safety precautions are noted, like wearing protective equipment when releasing spring forces.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...wfu089267
The document provides instructions for disassembling and assembling a 336F excavator travel motor. It lists 30 steps for disassembly, removing components like springs, seals, plates, and housing pieces. It then lists 27 steps for reassembly, replacing components and ensuring proper positioning and torque of fasteners. Tools required include lifting devices, presses, pliers, and loctite. Safety precautions are provided to avoid injury from released springs or striking by parts.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Similar to Caterpillar Cat 336F L Excavator (Prefix SSN) Service Repair Manual (SSN00001 and up).pdf (17)
Caterpillar Cat 349F L Excavator (Prefix TEW) Service Repair Manual (TEW00001...zatao0179249295
The document provides instructions to disassemble and assemble the travel motor of 349F and 349F L excavators. It describes 31 steps to disassemble the travel motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It then describes assembling the motor in reverse order, noting specifications like part numbers, torque values, and lubrication points to reinstall components in their original positions.
Caterpillar Cat 349F L Excavator (Prefix KEA) Service Repair Manual (KEA00001...zatao0179249295
The document provides instructions for disassembling and assembling the travel motor of a 349F L excavator. It lists 30 steps to disassemble the motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It also provides specifications for assembling the motor, such as torque specifications for plugs and bolts, and notes on lubricating sliding surfaces before assembly. The goal is to take the motor apart in a specific sequence and then rebuild it correctly using the provided specifications.
Caterpillar Cat 349F L Excavator (Prefix HPD) Service Repair Manual (HPD00001...zatao0179249295
This document provides instructions for disassembling the travel motor on 349F and 349F L Excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations are provided for each step along with safety notices and required tools. The goal is to break down the travel motor into its core components for repair or replacement.
Caterpillar Cat 349F L Excavator (Prefix HLB) Service Repair Manual (HLB00001...zatao0179249295
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L Excavators. It describes 31 steps to disassemble the travel motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It also provides specifications for components like plug torque values and spring dimensions to follow when reassembling the travel motor in reverse order.
Caterpillar Cat 349F L Excavator (Prefix BZ2) Service Repair Manual (BZ200001...zatao0179249295
This document provides instructions for disassembling the travel motor on 349F and 349F L Excavator models. It describes 27 steps to fully disassemble the travel motor, including draining fluids, removing housing components, plates, seals, bearings, and other internal parts. Various tools are required, and safety precautions are provided to remove parts under spring tension. The goal is to break down the travel motor into its core components to facilitate repair or replacement of parts.
The document provides instructions to disassemble and assemble the travel motor of 349F and 349F L excavators. It describes 31 steps to disassemble the travel motor by removing components like plugs, seals, springs, pistons, plates, and bearings. It then describes assembling the motor in reverse order, noting specifications like torque values and lubrication points for components like plugs, bolts, seals and bearings.
This document provides instructions to disassemble a travel motor on a 349F and 349F L Excavator. It outlines 27 steps to fully disassemble the travel motor, including draining fluids, removing housing components, plates, pistons, bearings, seals and other internal parts. Various tools are required, including bolts, nuts, pullers, eyebolts and other lifting devices to safely remove parts. Safety precautions are provided to wear protective equipment when removing parts with spring forces.
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L Excavators. It begins by listing the required tools and safety precautions. The 31 step disassembly process removes components like plugs, springs, pistons, plates and seals. The assembly section lists specifications for components and their installation, such as torque values and lubricants to use.
This document provides instructions for disassembling the travel motor on 349F and 349F L Excavator models. It describes 27 steps to fully disassemble the travel motor, including draining fluids, removing housing components, plates, bearings, seals, springs, and pistons. Special care must be taken when removing components under spring pressure. Various tools are required including lifting devices, pullers, bolts and eyebolts to securely support parts being removed.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...zatao0179249295
1. The document provides step-by-step instructions for disassembling and assembling a hydraulic fan drive for a 349E L excavator.
2. The disassembly process involves removing 22 components and parts from the fan drive assembly including sensors, retainers, seals, plates, discs, and housings.
3. The assembly process lists 8 steps including pressing components back together and installing new seals, sleeves and retaining rings. Precise instructions are provided along with required tools.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...zatao0179249295
The document provides instructions for disassembling and assembling a hydraulic fan drive on an excavator. The disassembly process involves removing 22 components from the fan drive including bolts, seals, retainers, discs, and bearings. The assembly process reverses the disassembly steps and provides illustrations of each step. Precautions are listed regarding cleanliness, handling components, and properly assembling spring-loaded parts.
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. The disassembly process involves removing 22 components from the fan drive including bolts, retainers, seals, discs, plates, and bearings. The assembly process is the reverse and includes applying sealant and installing the components in the proper order and orientation using various tools. Special care must be taken when handling springs and seals. Cleanliness is important to prevent contamination.
Caterpillar Cat 349D2 L Excavator (Prefix XAC) Service Repair Manual (XAC0000...zatao0179249295
This document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pistons, and housing. Proper tooling is required and parts must be cleaned, marked and replaced in their original locations and orientations. Safety notices warn of spring forces, contained fluids, and preventing contamination.
Caterpillar Cat 349D2 L Excavator (Prefix WEC) Service Repair Manual (WEC0000...zatao0179249295
This document provides instructions for removing and installing various engine components on a 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing gears, seals, bolts and bearings.
2. Removing the flywheel by detaching lifting brackets, installing guide studs, and removing bolts and the flywheel.
3. Installing the flywheel by heating the ring gear, attaching lifting brackets, applying threadlocker to bolts, and tightening bolts to specification.
4. Removing the crankshaft rear seal by removing bolts and the seal, and inspecting the crankshaft surface.
5. Installing
The document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1) Removing the rear gear group by removing bolts, seals, gears, bushings, and bearings.
2) Removing the flywheel by attaching lifting tools and removing bolts.
3) Removing the crankshaft rear seal by removing bolts.
Installation procedures are also provided with details on cleaning, heating, cooling, and applying threadlocker to parts before tightening to specified torques. Tools required are listed for each procedure.
Caterpillar Cat 349D L Excavator (Prefix FLA) Service Repair Manual (FLA00001...zatao0179249295
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing and installing the rear gear group components like gears, covers, seals, and bearings. Precise measurements and tooling are required for proper installation.
- Procedures for removing and installing the flywheel, which requires lifting equipment due to its weight. The ring gear must be heated for removal and cooled for installation.
- Removing and installing the crankshaft rear seal using specific bolts and torque specifications. Inspection of the crankshaft surface is also noted.
Precise measurements and use of the correct tools are emphasized for correct re
Caterpillar Cat 345D L Excavator (Prefix YEE) Service Repair Manual (YEE00001...zatao0179249295
This document provides instructions for removing and installing various engine components on a Caterpillar 345D L excavator, including:
1. The rear gear group is removed by taking off bolts, seals, gears, and covers. Proper bearing installation is emphasized.
2. Flywheel removal requires lifting equipment due to its weight. Installation involves heating the ring gear, applying loctite, and torqueing bolts.
3. Removing the crankshaft rear seal involves taking off bolts. Inspection of the seal surface and crankshaft specifications is noted.
4. Installing the rear seal requires cleaning, applying primer and retaining compound, and following a tightening sequence.
Caterpillar Cat 345D L Excavator (Prefix PBT) Service Repair Manual (PBT00001...zatao0179249295
The document provides instructions for disassembling and assembling a swing drive. It lists the required tools and parts. The disassembly process involves removing components like the carrier assembly, ring gear, sun gear and planetary gears. The assembly process instructs to clean parts and apply lubricants before reinstalling components like bearings, seals and gears in the reverse order of disassembly. Proper alignment and pressing of components into place is emphasized.
Caterpillar Cat 345D L Excavator (Prefix KFH) Service Repair Manual (KFH00001...zatao0179249295
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine. The removal procedure includes removing the electric starting motor, flywheel, rear crankshaft seal, various gears and covers. The installation procedure describes installing these components in reverse order and provides details on properly positioning bearings and applying threadlocker to bolts. Tools required are also listed.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...zatao0179249295
This document provides instructions for removing and installing the rear gear group on a 345D L excavator with a C13 engine. The removal procedure involves 11 steps including removing bolts, gears, seals, and bearings. The installation procedure involves 11 steps in the reverse order and provides notes on properly installing bearings, seals, and gears. Tools required are also listed.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 14 08:53:05 UTC+0800 2020
10/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07197988
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C 6V-2055 Grease -
D 1P-0510 Driver Gp 1
Illustration 1 g06250080
1. Use a suitable press to press bearing (48) onto shaft (47).
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 2 g06249762
Illustration 3 g06250732
Lip seal orientation.
2. Install lip seal (46).
Illustration 4 g06250082
3. Install O-ring seal (45).
4. Use a soft faced hammer to install shaft assembly (44). Install shaft assembly (44) in the
direction that is indicated by the arrow.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 5 g06249755
Illustration 6 g06249758
5. Use a suitable press and Tooling (D) to install spacers (42), spring (43), and snap ring (41).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Illustration 7 g06249751
6. Install springs (40) and the balls.
Illustration 8 g06249682
7. Install pistons (39).
Illustration 9 g06249657
8. Install swashplate (38).
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...