This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 individual parts from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like keys and plates. Special care must be taken when handling springs to avoid injury. Tools required include wrenches, pliers, presses, and specialty Caterpillar tools.
Caterpillar cat 336 f excavator (prefix nbl) service repair manual (nbl00001 ...fjsqazkekdmme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. It describes 30 steps to disassemble the travel motor, removing components like springs, seals, plates, and housing pieces. It then describes 31 steps to reassemble the travel motor, replacing components in the reverse order and noting specifics like torque settings and lubrication points. The overall document provides detailed instructions to take apart and rebuild the travel motor.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 349 f excavator (prefix hpd) service repair manual (hpd00001 ...fjsjjekdkme
The document provides instructions to disassemble a travel motor over 27 steps. It begins by draining the motor and removing external components like plugs, seals, and the motor head assembly. Internally, it describes removing the barrel assembly, piston assemblies, separator and friction plates, springs, and swashplate. Safety notices are provided throughout to warn of potential spring hazards and to mark components for proper reassembly.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...cdsaas
This document provides disassembly and assembly instructions for the final drive of a 349E L excavator. It includes specifications for parts, required tools, and a step-by-step procedure for assembling the final drive. The procedure involves installing bearings, seals, gears, shims, and other components in the proper order and ensuring correct torque and clearance specifications are followed.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 336 f excavator (prefix nbl) service repair manual (nbl00001 ...fjsqazkekdmme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. It describes 30 steps to disassemble the travel motor, removing components like springs, seals, plates, and housing pieces. It then describes 31 steps to reassemble the travel motor, replacing components in the reverse order and noting specifics like torque settings and lubrication points. The overall document provides detailed instructions to take apart and rebuild the travel motor.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 349 f excavator (prefix hpd) service repair manual (hpd00001 ...fjsjjekdkme
The document provides instructions to disassemble a travel motor over 27 steps. It begins by draining the motor and removing external components like plugs, seals, and the motor head assembly. Internally, it describes removing the barrel assembly, piston assemblies, separator and friction plates, springs, and swashplate. Safety notices are provided throughout to warn of potential spring hazards and to mark components for proper reassembly.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...cdsaas
This document provides disassembly and assembly instructions for the final drive of a 349E L excavator. It includes specifications for parts, required tools, and a step-by-step procedure for assembling the final drive. The procedure involves installing bearings, seals, gears, shims, and other components in the proper order and ensuring correct torque and clearance specifications are followed.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
Caterpillar cat 345 c hydraulic excavator (prefix tdg) service repair manual ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing pieces. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and measure clearances during assembly to ensure proper operation. Tools required are listed for both disassembly and assembly.
Caterpillar cat 349 d2 l excavator (prefix xac) service repair manual (xac000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, housing keys and more. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and ensure proper orientation of washers and spacers. Tools required are listed for both disassembly and assembly processes.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 336 e l excavator (prefix cmr) service repair manual (cmr0000...fjskekmdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove all components of the travel motor. Key steps include using an air pressure tool to remove the brake piston, pressing out bearing races, and removing springs. The assembly procedure reverses the disassembly process in 27 steps and provides details on lubricating parts and ensuring proper alignment of components like pistons and keys. Tools required include an adapter, nuts, washers, eyebolts, retaining ring pliers, a bearing puller, and Loctite.
Caterpillar cat 349 d2 l excavator (prefix zae) service repair manual (zae000...cdsaas
This document provides instructions for removing and installing the rear gear group and crankshaft rear seal on a C13 engine. The removal procedure involves using various tools to remove 11 components in 9 steps. The installation procedure involves preparing and installing 14 components in 12 steps, ensuring proper dimensions and torque specifications are followed. Proper cleaning and use of locking compounds is emphasized.
Caterpillar cat 349 f l excavator (prefix bz2) service repair manual (bz20000...fjsjjekdkme
The document provides step-by-step instructions to disassemble a travel motor on an excavator model 349F L. It details 27 steps to remove components such as plugs, seals, springs, pistons, plates, and housings. Safety precautions are provided to wear protective equipment when removing parts with stored spring energy. Diagrams illustrate each step for clarifying proper disassembly procedures.
Caterpillar cat 390 f mobile hydraulic excavator (prefix b37) service repair ...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, swashplate, shaft and bearings. The assembly procedure instructs to clean parts, apply oil, and install components like the lip seal, bearing, retaining ring, and shaft in the reverse order of disassembly. Proper tooling and safety precautions are noted throughout.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are described to prevent injury from spring forces. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fjsjekkdmnem
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure involves 19 steps and begins with installing O-rings, seals, and pistons before assembling the barrel assembly, rotating assembly, and housing components. Special care must be taken when handling springs or rotating components to avoid injury.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...shibi1322
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Proper disassembly and reinstallation of springs and other components is emphasized to avoid injury.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...8foskkdjdkdm3e
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Personal safety warnings are included throughout regarding spring loaded components.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekkdmnem
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and bearings safely.
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...fjdkksmemd
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides notes on proper installation of springs, seals, and ensuring alignment of keys and notches. Tools required include a transmission repair stand, lifting eyes, bolts, drivers and pullers. Personal protective equipment is recommended when handling springs.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
Caterpillar cat 345 c hydraulic excavator (prefix tdg) service repair manual ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing pieces. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and measure clearances during assembly to ensure proper operation. Tools required are listed for both disassembly and assembly.
Caterpillar cat 349 d2 l excavator (prefix xac) service repair manual (xac000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, housing keys and more. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and ensure proper orientation of washers and spacers. Tools required are listed for both disassembly and assembly processes.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 336 e l excavator (prefix cmr) service repair manual (cmr0000...fjskekmdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove all components of the travel motor. Key steps include using an air pressure tool to remove the brake piston, pressing out bearing races, and removing springs. The assembly procedure reverses the disassembly process in 27 steps and provides details on lubricating parts and ensuring proper alignment of components like pistons and keys. Tools required include an adapter, nuts, washers, eyebolts, retaining ring pliers, a bearing puller, and Loctite.
Caterpillar cat 349 d2 l excavator (prefix zae) service repair manual (zae000...cdsaas
This document provides instructions for removing and installing the rear gear group and crankshaft rear seal on a C13 engine. The removal procedure involves using various tools to remove 11 components in 9 steps. The installation procedure involves preparing and installing 14 components in 12 steps, ensuring proper dimensions and torque specifications are followed. Proper cleaning and use of locking compounds is emphasized.
Caterpillar cat 349 f l excavator (prefix bz2) service repair manual (bz20000...fjsjjekdkme
The document provides step-by-step instructions to disassemble a travel motor on an excavator model 349F L. It details 27 steps to remove components such as plugs, seals, springs, pistons, plates, and housings. Safety precautions are provided to wear protective equipment when removing parts with stored spring energy. Diagrams illustrate each step for clarifying proper disassembly procedures.
Caterpillar cat 390 f mobile hydraulic excavator (prefix b37) service repair ...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, swashplate, shaft and bearings. The assembly procedure instructs to clean parts, apply oil, and install components like the lip seal, bearing, retaining ring, and shaft in the reverse order of disassembly. Proper tooling and safety precautions are noted throughout.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are described to prevent injury from spring forces. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fjsjekkdmnem
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure involves 19 steps and begins with installing O-rings, seals, and pistons before assembling the barrel assembly, rotating assembly, and housing components. Special care must be taken when handling springs or rotating components to avoid injury.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...shibi1322
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Proper disassembly and reinstallation of springs and other components is emphasized to avoid injury.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...8foskkdjdkdm3e
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Personal safety warnings are included throughout regarding spring loaded components.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekkdmnem
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and bearings safely.
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar Cat 336F L Excavator (Prefix WTZ) Service Repair Manual (WTZ00001...fjdkksmemd
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides notes on proper installation of springs, seals, and ensuring alignment of keys and notches. Tools required include a transmission repair stand, lifting eyes, bolts, drivers and pullers. Personal protective equipment is recommended when handling springs.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...yin9niaojiao
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides notes on proper installation of springs, seals, and ensuring alignment of keys and notches. Tools required include a transmission repair stand, lifting eyes, bolts, drivers and pullers. Personal protective equipment is recommended when working with springs.
Similar to Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn00001 and up) (12)
John deere 1565 front mower service repair manualfhhjsjekmdme
The brakes on the machine are not engaging or holding the machine. Possible causes include issues with the park brake lock lever assembly, brake linkage adjustment, brake return springs, brake friction disks, or brake separator plates. The manual provides procedures to check each component and make any necessary repairs or adjustments.
John deere 1545 front mower service repair manualfhhjsjekmdme
The brakes on the machine are not engaging or holding the machine. Possible causes include issues with the park brake lock lever assembly, brake linkage adjustment, brake return springs, brake friction disks, or brake separator plates. The manual provides procedures to check each component and make any necessary repairs or adjustments.
John deere 1445 front mower service repair manualfhhjsjekmdme
The brakes on the machine are not engaging or holding the machine. Possible causes include issues with the park brake lock lever assembly, brake linkage adjustment, brake return springs, brake friction disks, or brake separator plates. The manual provides instructions to check each component and make any necessary repairs or adjustments.
John deere 1435 front mower service repair manualfhhjsjekmdme
This technical manual provides service information for John Deere front mowers models 1420, 1435, 1445, 1545, and 1565. The manual is organized into specific sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, operation and diagnostics, tests and adjustments, repair, and safety precautions. Technicians are advised to follow all safety procedures when servicing equipment to avoid injury from hazards like high pressure fluids, moving parts, hot surfaces, and heavy components.
John deere 1420 front mower service repair manualfhhjsjekmdme
The brakes on the machine are not engaging or holding the machine. Possible causes include issues with the park brake lock lever assembly, brake linkage adjustment, brake return springs, brake friction disks, or brake separator plates. The manual provides procedures to check each component and make any necessary repairs or adjustments.
John deere 1070 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. The manual is divided into sections covering safety, general specifications, repair specifications, fuel and lubricants, engine repair, electrical systems, power train repair, steering and brakes, hydraulics, and operational testing. Safety messages in the introduction warn of hazards such as high pressure fluids, battery explosions, and working with fuels and chemicals. Technicians are advised to follow safety precautions and use recommended tools and materials for repairs.
John deere 990 compact utility tractor service repair manualfhhjsjekmdme
The technical manual provides instructions for servicing a 990 Compact Utility Tractor. It contains sections on specific systems organized by contents, specifications, component location, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. Safety procedures are outlined, including precautions for working with batteries, high pressure lines, and following proper service procedures. The document provides guidance on safely working on and repairing the tractor.
John deere 970 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians repairing and maintaining these tractor models.
John deere 955 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
John deere 870 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians.
John deere 856 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It covers general information, diesel engine repair, fuel and air repair, alternator repair, power train repair, steering and brakes repair, hydraulics repair, and miscellaneous repair. Repair sections provide instructions for repairing components, while diagnostic sections help identify common failures. Information is organized into groups for easy reference to specifications, tools, parts, and repair instructions for various components.
John deere 855 compact utility tractor service repair manualfhhjsjekmdme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
The document provides maintenance and safety information for a Clark lift truck model SM-560. It includes sections on safety signs/messages, user safe maintenance practices, a planned maintenance program, and procedures for various maintenance tasks such as inspecting wheels/tires, testing controls and brakes, checking batteries, and cleaning the truck. Regular maintenance in accordance with the manufacturer's recommendations is emphasized as important for safety and long equipment life.
Clark tmg 13 20 x forklift service repair manualfhhjsjekmdme
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark tmg 12 25 forklift service repair manualfhhjsjekmdme
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark sf20 30 dlg forklift service repair manual #2fhhjsjekmdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is accessed through openings in the backing plate or wheel hub/drum.
Clark pwx forklift service repair manualfhhjsjekmdme
This document provides information about periodic maintenance of HWX/PWX trucks, including:
1. A maintenance schedule listing tasks and suggested intervals for normal, severe, and extreme operating conditions.
2. Details of a planned maintenance program involving inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form for documenting inspections.
This service manual covers Clark PWT tow tractors and PWC center controlled pallet trucks manufactured after 1989, providing specifications and maintenance information. Standard PWT models have a 1.0 or 2.5 HP motor and can tow up to 10,000 lbs, while PWC models have a 2.5 HP motor and 6000 or 8000 lb capacity. The document includes sections on general information, electrical systems, hydraulics, drive systems, brakes, steering, load carriers, frames, and optional equipment.
Clark pwd 36 forklift service repair manualfhhjsjekmdme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate components that are OK, need adjustment, repair or replacement, or require immediate shop repair.
Clark pwd 30 40 se service repair manualfhhjsjekmdme
This document provides maintenance schedules and procedures for Clark trucks. It discusses periodic service and planned maintenance, which involve regularly scheduled inspections, adjustments, and lubrications. The document provides maintenance schedules that specify all maintenance tasks that should be performed periodically, along with suggested time intervals. It also contains sections covering planned maintenance procedures and inspection forms. The overall document provides guidance to service technicians on maintaining Clark trucks through routine maintenance.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 14 08:53:05 UTC+0800 2020
10/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07197988
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C 6V-2055 Grease -
D 1P-0510 Driver Gp 1
Illustration 1 g06250080
1. Use a suitable press to press bearing (48) onto shaft (47).
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 2 g06249762
Illustration 3 g06250732
Lip seal orientation.
2. Install lip seal (46).
Illustration 4 g06250082
3. Install O-ring seal (45).
4. Use a soft faced hammer to install shaft assembly (44). Install shaft assembly (44) in the
direction that is indicated by the arrow.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 5 g06249755
Illustration 6 g06249758
5. Use a suitable press and Tooling (D) to install spacers (42), spring (43), and snap ring (41).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 7 g06249751
6. Install springs (40) and the balls.
Illustration 8 g06249682
7. Install pistons (39).
Illustration 9 g06249657
8. Install swashplate (38).
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...