This document provides disassembly and assembly instructions for the travel motor on a 336F L excavator. The disassembly process involves removing 30 different components of the travel motor in a specific sequence. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like keys and notches. Special care must be taken when handling springs to avoid injury. Tools required include lifting devices, presses, pliers and drivers.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are described to prevent injury from spring forces. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fjsjekkdmnem
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure involves 19 steps and begins with installing O-rings, seals, and pistons before assembling the barrel assembly, rotating assembly, and housing components. Special care must be taken when handling springs or rotating components to avoid injury.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...shibi1322
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Proper disassembly and reinstallation of springs and other components is emphasized to avoid injury.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...8foskkdjdkdm3e
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Personal safety warnings are included throughout regarding spring loaded components.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekkdmnem
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and bearings safely.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are described to prevent injury from spring forces. Tools required are listed for both procedures.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...fjsjekkdmnem
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure involves 19 steps and begins with installing O-rings, seals, and pistons before assembling the barrel assembly, rotating assembly, and housing components. Special care must be taken when handling springs or rotating components to avoid injury.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...shibi1322
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides instructions to reinstall components in their proper positions and orientations. Precautions are listed to prevent injury from spring forces. Tools required are also identified.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fhhjsjekmdme
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Proper disassembly and reinstallation of springs and other components is emphasized to avoid injury.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...8foskkdjdkdm3e
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides important notes on component orientation and tooling used. Personal safety warnings are included throughout regarding spring loaded components.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekkdmnem
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and bearings safely.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...dxem8295569
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfdxem8295569
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines and their fuel and electrical systems, including theory of operation, diagnostics, and testing procedures. The manual is intended to be used along with machine technical manuals and provides repair specifications, procedures, and other information for servicing engine components. It emphasizes diagnosis, testing, safety, and step-by-step instructions for repairs.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...dxem8295569
This document provides information about Powertech 4.5L and 6.8L diesel engines, including:
- Identification of engine models and serial numbers
- Guidelines for fuels, lubricants, and coolants
- Sections covering repair and maintenance of engine components
- Theory of operation and diagnostics
- Lists of required tools and specifications
The document contains technical details to assist experienced technicians in servicing Powertech diesel engines. Safety messages are included throughout and other companion manuals provide additional information on electronic fuel systems.
John Deere Alternators & Starter Motors Service Repair Manual.pdfdxem8295569
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and using protective equipment. The document provides tables of standard torque values for bolts and includes wiring diagrams.
John Deere 6605 Tractor Service Repair Manual (TM4866).pdfdxem8295569
This document contains sections and groups related to repairing Tractors 4235 and 4435. It includes instructions for repairing and replacing components like the transmission, brakes, hydraulics, steering, electrical systems, and more. Safety procedures and proper assembly techniques are emphasized throughout.
John Deere 6405 Tractor Service Repair Manual (TM4866).pdfdxem8295569
This document contains sections and groups describing the assembly and operation of various tractor components. It includes descriptions of assembling the differential, installing transmissions and shafts, and setting up hydraulic and electrical systems. Safety precautions and specifications are provided for components like pumps, valves, cylinders, and brakes.
John Deere 3410X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3410 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3310X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3310 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3210X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3210 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 113 172 Clipper Service Repair Manual.pdfdxem8295569
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid reaching or pointing tools toward the body, and ensure proper maintenance and inspections are conducted.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfdxem8295569
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid reaching or pointing tools toward the body, and ensure proper maintenance and inspections are conducted.
John Deere 14SZ Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14SX Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides remove/install and repair procedures, component locations, theory of operation, and diagnostic information to service technicians.
John Deere 14ST Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on the mowers.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...dxem8295569
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfdxem8295569
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines and their fuel and electrical systems, including theory of operation, diagnostics, and testing procedures. The manual is intended to be used along with machine technical manuals and provides repair specifications, procedures, and other information for servicing engine components. It emphasizes diagnosis, testing, safety, and step-by-step instructions for repairs.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...dxem8295569
This document provides information about Powertech 4.5L and 6.8L diesel engines, including:
- Identification of engine models and serial numbers
- Guidelines for fuels, lubricants, and coolants
- Sections covering repair and maintenance of engine components
- Theory of operation and diagnostics
- Lists of required tools and specifications
The document contains technical details to assist experienced technicians in servicing Powertech diesel engines. Safety messages are included throughout and other companion manuals provide additional information on electronic fuel systems.
John Deere Alternators & Starter Motors Service Repair Manual.pdfdxem8295569
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and using protective equipment. The document provides tables of standard torque values for bolts and includes wiring diagrams.
John Deere 6605 Tractor Service Repair Manual (TM4866).pdfdxem8295569
This document contains sections and groups related to repairing Tractors 4235 and 4435. It includes instructions for repairing and replacing components like the transmission, brakes, hydraulics, steering, electrical systems, and more. Safety procedures and proper assembly techniques are emphasized throughout.
John Deere 6405 Tractor Service Repair Manual (TM4866).pdfdxem8295569
This document contains sections and groups describing the assembly and operation of various tractor components. It includes descriptions of assembling the differential, installing transmissions and shafts, and setting up hydraulic and electrical systems. Safety precautions and specifications are provided for components like pumps, valves, cylinders, and brakes.
John Deere 3410X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3410 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3310X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3310 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3210X Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 3210 Tractor Service Repair Manual (tm4663).pdfdxem8295569
This document provides safety instructions and warnings for operating various tractor models. It instructs the operator to carefully read all safety messages in this manual and on the tractor, follow recommended precautions and safe operating practices, and ensure any maintenance or repairs are done correctly to avoid accidents or injury. Operators should learn proper machine operation and control methods before use.
John Deere 113 172 Clipper Service Repair Manual.pdfdxem8295569
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid reaching or pointing tools toward the body, and ensure proper maintenance and inspections are conducted.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfdxem8295569
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid reaching or pointing tools toward the body, and ensure proper maintenance and inspections are conducted.
John Deere 14SZ Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14SX Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides remove/install and repair procedures, component locations, theory of operation, and diagnostic information to service technicians.
John Deere 14ST Walk-Behind Mower Service Repair Manual.pdfdxem8295569
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on the mowers.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 14 08:53:05 UTC+0800 2020
10/10
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR SSN
Configuration: 336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07197988
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C 6V-2055 Grease -
D 1P-0510 Driver Gp 1
Illustration 1 g06250080
1. Use a suitable press to press bearing (48) onto shaft (47).
1/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 2 g06249762
Illustration 3 g06250732
Lip seal orientation.
2. Install lip seal (46).
Illustration 4 g06250082
3. Install O-ring seal (45).
4. Use a soft faced hammer to install shaft assembly (44). Install shaft assembly (44) in the
direction that is indicated by the arrow.
2/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 5 g06249755
Illustration 6 g06249758
5. Use a suitable press and Tooling (D) to install spacers (42), spring (43), and snap ring (41).
3/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 7 g06249751
6. Install springs (40) and the balls.
Illustration 8 g06249682
7. Install pistons (39).
Illustration 9 g06249657
8. Install swashplate (38).
4/14
336F L Excavator SSN00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP65...
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...