This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, plates, and housings. The 21 step assembly procedure describes installing these same components in reverse order, noting torque specifications and use of locking adhesives. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are provided for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskkkdmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like races, bearings, gears and housing pieces using the appropriate tools. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like seals, bearings, gears and housing pieces using the appropriate tools. Precautions are noted for releasing spring forces during disassembly and reassembly.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fijsekkdmdm2w
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...zan2736ban
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, plates, and housings.
3) The assembly procedure is the reverse of disassembly and provides instructions for installing the components using loctite and torquing bolts to the specified values.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are provided for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall the components in reverse order. Precautions are provided for releasing spring forces and proper torque specifications.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include link brackets, bolts, crossblocks and drivers to compress springs and position parts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...ze3xiandiao
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskkkdmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like races, bearings, gears and housing pieces using the appropriate tools. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like seals, bearings, gears and housing pieces using the appropriate tools. Precautions are noted for releasing spring forces during disassembly and reassembly.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fijsekkdmdm2w
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...zan2736ban
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, plates, and housings.
3) The assembly procedure is the reverse of disassembly and provides instructions for installing the components using loctite and torquing bolts to the specified values.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are provided for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall the components in reverse order. Precautions are provided for releasing spring forces and proper torque specifications.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include link brackets, bolts, crossblocks and drivers to compress springs and position parts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...ze3xiandiao
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include link brackets, bolts, crossblocks and drivers to compress springs and position parts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...jdkskmmdmd1
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...pwg56547003
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include lifting devices, pry bars, driver groups and torque wrenches.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...zatao0179249295
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...kesi7153062
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...cnp692569
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskkkdmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...zatao0179249295
1) The document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) It describes 25 steps to disassemble the final drive including removing bolts, springs, gears, seals and bearings.
3) It then describes 18 steps for reassembling the final drive, reversing the disassembly steps and noting torque specifications for bolts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...kesi7153062
1) The document provides disassembly and assembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly instructions describe removing 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly instructions describe installing the same 25 components in the reverse order and provide torque specifications for certain bolts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...cnp692569
1) The document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) It describes 25 steps to disassemble the final drive including removing bolts, springs, gears, seals and bearings.
3) It then describes 18 steps for reassembling the final drive, including installing bearings, gears, seals and torquing bolts.
Caterpillar Cat 329DL MOBILE HYD POWER UNIT Excavator (Prefix L5G) Service Re...jdjkskmikdkmd
This document provides instructions for disassembling the final drive of a 329D L Mobile Hydraulic Power Unit. It outlines 30 steps to fully disassemble the final drive, including removing gears, carriers, shafts, seals and other components. Various tools are required to secure, lift and remove parts. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 329DL MOBILE HYD POWER UNIT Excavator (Prefix L5G) Service Re...paws21610697
This document provides instructions for disassembling and assembling the final drive of a 329DL Mobile Hydraulic Power Unit. It lists the required tools and presents 36 steps for disassembly, including removing gears, carriers, seals, and housing components. The final drive assembly weighs approximately 550 kg and its individual parts require lifting devices and stands during removal and installation.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix l5g) service r...ifse9diodkdk
This document provides instructions for disassembling the final drive of a 329D L Mobile Hydraulic Power Unit. It outlines 30 steps to fully disassemble the final drive, including removing gears, carriers, shafts, seals and other components. Various tools are required to secure, lift and remove parts. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix l5g) service r...udjdkkmdmdm
This document provides instructions for disassembling and assembling the final drive of a 329DL Mobile Hydraulic Power Unit. It lists the required tools and presents 36 steps for disassembly, including removing gears, carriers, seals, and housing components. The final drive assembly weighs approximately 550 kg and its individual parts require lifting devices due to their weights ranging from 32 to 254 kg.
Caterpillar Cat 325C FM EXCAVATOR (Prefix Y4P) Service Repair Manual (Y4P0000...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 325C FM excavator. It lists the required tools and parts. The disassembly procedure involves removing over 30 components of the final drive including sprockets, gears, seals, plates, and housings. Detailed illustrations are provided to show how to remove each part correctly. The assembly procedure is not included.
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, and piston assemblies. Proper cleaning and identification of parts is emphasized to ensure correct reassembly. Tools required are listed in a table.
The document provides instructions for disassembling and assembling the travel motor of a 345C excavator. It lists 31 steps to disassemble the various components of the travel motor, including removing the head, brake piston, disks, rotating group, and seals. Proper identification and cleaning of parts is emphasized to avoid contamination. The appropriate tools are also listed.
More Related Content
Similar to Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001 and up).pdf
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include link brackets, bolts, crossblocks and drivers to compress springs and position parts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...jdkskmmdmd1
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...pwg56547003
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include lifting devices, pry bars, driver groups and torque wrenches.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...zatao0179249295
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...kesi7153062
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...cnp692569
This document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit. The instructions include 25 steps to disassemble the final drive by removing components like bolts, seals, gears, and housings. It also includes 22 steps to reassemble the final drive by installing these same components in the reverse order. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches to properly position and fasten parts. Safety precautions are noted for releasing spring forces during disassembly and assembly.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskkkdmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...zatao0179249295
1) The document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) It describes 25 steps to disassemble the final drive including removing bolts, springs, gears, seals and bearings.
3) It then describes 18 steps for reassembling the final drive, reversing the disassembly steps and noting torque specifications for bolts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...kesi7153062
1) The document provides disassembly and assembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly instructions describe removing 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly instructions describe installing the same 25 components in the reverse order and provide torque specifications for certain bolts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...cnp692569
1) The document provides assembly and disassembly instructions for the final drive of a 336D L Mobile Hydraulic Power Unit.
2) It describes 25 steps to disassemble the final drive including removing bolts, springs, gears, seals and bearings.
3) It then describes 18 steps for reassembling the final drive, including installing bearings, gears, seals and torquing bolts.
Caterpillar Cat 329DL MOBILE HYD POWER UNIT Excavator (Prefix L5G) Service Re...jdjkskmikdkmd
This document provides instructions for disassembling the final drive of a 329D L Mobile Hydraulic Power Unit. It outlines 30 steps to fully disassemble the final drive, including removing gears, carriers, shafts, seals and other components. Various tools are required to secure, lift and remove parts. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 329DL MOBILE HYD POWER UNIT Excavator (Prefix L5G) Service Re...paws21610697
This document provides instructions for disassembling and assembling the final drive of a 329DL Mobile Hydraulic Power Unit. It lists the required tools and presents 36 steps for disassembly, including removing gears, carriers, seals, and housing components. The final drive assembly weighs approximately 550 kg and its individual parts require lifting devices and stands during removal and installation.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix l5g) service r...ifse9diodkdk
This document provides instructions for disassembling the final drive of a 329D L Mobile Hydraulic Power Unit. It outlines 30 steps to fully disassemble the final drive, including removing gears, carriers, shafts, seals and other components. Various tools are required to secure, lift and remove parts. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix l5g) service r...udjdkkmdmdm
This document provides instructions for disassembling and assembling the final drive of a 329DL Mobile Hydraulic Power Unit. It lists the required tools and presents 36 steps for disassembly, including removing gears, carriers, seals, and housing components. The final drive assembly weighs approximately 550 kg and its individual parts require lifting devices due to their weights ranging from 32 to 254 kg.
Similar to Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001 and up).pdf (19)
Caterpillar Cat 325C FM EXCAVATOR (Prefix Y4P) Service Repair Manual (Y4P0000...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 325C FM excavator. It lists the required tools and parts. The disassembly procedure involves removing over 30 components of the final drive including sprockets, gears, seals, plates, and housings. Detailed illustrations are provided to show how to remove each part correctly. The assembly procedure is not included.
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, and piston assemblies. Proper cleaning and identification of parts is emphasized to ensure correct reassembly. Tools required are listed in a table.
The document provides instructions for disassembling and assembling the travel motor of a 345C excavator. It lists 31 steps to disassemble the various components of the travel motor, including removing the head, brake piston, disks, rotating group, and seals. Proper identification and cleaning of parts is emphasized to avoid contamination. The appropriate tools are also listed.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. Identification marks should be made on parts for reassembly. Cleaning is important to prevent contamination. The assembly procedure is not described.
Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001...ufs89eodkdmdm
This document provides the disassembly and assembly procedures for the travel motor of a 336E excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installing them and ensuring proper alignment of parts using marks made during disassembly. Special safety precautions and tools are noted throughout to properly release spring forces and install seals and bearings.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...ufs89eodkdmdm
The document provides instructions for assembling a travel motor on an excavator. It details 27 steps including installing seals, springs, pistons and other components into the motor housing. The motor is then installed onto the final drive assembly and excavator frame using bolts. Proper lubrication and torque specifications are emphasized to correctly assemble the travel motor.
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It describes 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Precautions are provided to ensure fluids are contained and parts are cleaned before assembly. Tools required are listed. Lubrication and heating of some parts is specified before installation.
3. Once assembled, the pump is attached to the tractor using bolts and hoses are connected to the manifold and slip joints.
This document provides instructions for removing and installing the front housing of a C27 Industrial Engine. The removal procedure involves detaching various components from the front of the engine like the water pump, oil filter housing, and brackets. Tools are required to remove some parts. The installation procedure specifies applying sealant, positioning the front housing and gasket, and installing bolts and other parts in the reverse order of removal. Tightening torques are provided for the bolts.
This document provides instructions for disassembling and assembling components of a C27 Industrial Engine, including:
1. Removing and installing the auxiliary drive by removing nuts, studs, pulley, gear, bearings, seals, and shaft.
2. Removing and installing the valve mechanism cover by removing and installing bolts and covers.
3. Removing and installing the valve mechanism cover base by removing tubes, harnesses, bolts, and installing seals and components.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C9 Industrial Engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing a unit injector from the cylinder head
The procedures describe draining fluids, removing bolts and hoses, cleaning parts, replacing seals, and torquing fasteners to the specified values. Special tools are listed for many of the removal and installation steps.
This document provides instructions for removing and installing inlet and exhaust valves on a C27 Industrial Engine. It describes:
- Using a valve spring compressor tool to remove the valve springs and valve spring retainers.
- Inspecting the valves and checking the spring force.
- Lubricating the valve stems before installation and compressing the springs with a tool to install the retainers.
- Cautions for wearing protective equipment when working with springs to avoid injury from parts propelled by the springs.
This document provides instructions for removing and installing various engine components on a Caterpillar C27 Industrial Engine, including:
1) Valves, springs, and related parts using specialized tools to compress springs.
2) Valve guides using a driver tool and ensuring proper height.
3) Valve seat inserts using an extractor tool and driver to install new inserts.
4) The engine oil filter base and related internal parts, noting any spring pressure hazards.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil cooler
- Reversing the removal procedures for installation, including applying oil to seals and tightening bolts in a specific sequence
1) The document provides instructions for removing and installing various components of a Caterpillar C9.3 industrial engine, including disconnecting snap-to-connect fittings, removing and installing a muffler, and removing and installing a fuel priming pump and fuel filter base.
2) The procedures include illustrations showing the components and numbered steps for disassembly and reassembly. Safety warnings are provided at the beginning regarding relieving pressures before disconnection.
3) Torque specifications and required tools are listed for relevant installation steps.
This document provides instructions for removing and installing various engine components on a Caterpillar C9 Industrial Engine, including:
1. Valves, valve guides, and valve seat inserts. It describes using specialized tools to compress springs and extract/install parts.
2. The engine oil filter base, oil cooler, and oil pump. It emphasizes cleaning parts and contains fluids properly during removal and installation.
3. Safety precautions are provided, such as wearing protective equipment when working with spring-loaded parts and ensuring contaminants are avoided. Numerical sequences and specifications are given for installing certain parts correctly.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil cooler
- Reversing the removal procedures for installation, including applying oil to seals and tightening bolts in a specific sequence
Caterpillar Cat 345D L Excavator (Prefix RGG) Service Repair Manual (RGG00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pins, bearing, and piston assemblies. Special care must be taken to clean parts and ensure they are reinstalled in their original locations. Proper assembly prevents damage and contamination of parts.
This document provides instructions for disassembling and assembling the torque converter and transmission of a 938F wheel loader. It describes removing over 20 components of the torque converter including the transmission cover, driver gear, stator carrier, and retaining rings. It then details disassembling the transmission by removing the shafts, gears, clutch plates, seals, and over 15 additional parts. The goal is to allow maintenance and repair of these core powertrain systems.
Caterpillar Cat 345D L Excavator (Prefix RGD) Service Repair Manual (RGD00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, plates, seals, pins, and piston assemblies. The instructions describe cleaning parts and ensuring they are reinstalled in their original locations to properly reassemble the travel motor.
Caterpillar Cat 345D L Excavator (Prefix YEE) Service Repair Manual (YEE00001...ufs89eodkdmdm
This document provides instructions for removing and installing various engine components on a 345D L Excavator, including:
1. The rear gear group, which involves removing several gears, seals, and bearings.
2. The flywheel, which requires lifting equipment and guide studs due to its weight.
3. The crankshaft rear seal, which is removed after removing the flywheel. Precise instructions are provided along with safety notices.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i05271119
Final Drive - Disassemble
SMCS - 4050-015
S/N - GGH1-UP
S/N - HHK1-UP
S/N - J6D1-UP
S/N - JRX1-UP
S/N - NBN1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
B 8T-0226 Bolt 2
C
5F-7366 Forcing Screw 1
1A-1935 Full Nut 1
D 150-1782 Crossblock 1
E 5P-8713 Plate 1
F 1P-0510 Driver Gp 1
G 384-8910 Torque Wrench 1
1/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 3S-6224 Electric Hydraulic Pump Gp 1
8H-8535 1 1/4 Socket 1
H 1U-9895 Crossblock 1
J 126-7183 Crossblock 1
K c M14 X 2.0 X 254mm -
L 417-6239 Lifting Adapter 1
Illustration 1 g03032222
1. Use Tooling (A) and a suitable lifting device in order to position final drive (1) . The weight
of final drive (1) is approximately 435 kg (960 lb).
Illustration 2 g03353849
2. Remove bolts (2) .
2/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g03034835
3. Use Tooling (B) and suitable pry bar to remove flange (3) . Remove o-ring (4) from flange
(3) .
Illustration 4 g03353852
Illustration 5 g03353878
3/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Use Tooling (C) , (D) , (E) , and (F) to compress spring retainer (6) .
5. Remove retaining ring (5) .
6. Remove spring retainer (6) .
Illustration 6 g03353908
7. Remove springs (7) and piston (8) . Remove gear (12) (not shown) .
4/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 7 g03032756
Illustration 8 g03032757
8. Remove discs (9) and plates (10) .
Illustration 9 g03033059
9. Remove seals (11) and gear (12) .
5/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g03033061
10. Use Tooling (A) and a suitable lifting device to reposition final drive (1) . The weight of
final (1) is approximately 435kg (960 lb).
Illustration 11 g03033065
11. Remove bolts (14) . Use a suitable lifting device to remove cover (13) .
Illustration 12 g03353916
12. The weight of cover (13) is approximately 73 kg (160 lb).
6/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 13 g03033067
13. Remove o-ring (15) from cover (13) .
Illustration 14 g03033069
14. Remove gear assembly (16) .
Illustration 15 g03033299
7/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 16 g03033318
15. Remove gear (18) from shaft (17) .
Illustration 17 g03033321
16. Remove gear assembly (19) .
Illustration 18 g03033322
8/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 17. Remove gear (20) .
Illustration 19 g03353922
18. Use Tooling (G) to remove bolts (21) . Bolts (21) may need the temperature raised for
assisting removal. (Note: disregard bolts (21) .)
Illustration 20 g03033380
19. Remove housing (22) .
9/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 21 g03033496
20. Remove gear assemblies (23) .
Illustration 22 g03033497
21. Compress retaining ring (25) in order to remove plate assembly (24) .
Illustration 23 g03033498
22. Use Tooling (C) , (H, and) (J) in order to separate housing (26) from hub (27) .
10/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 24 g03033500
23. Remove race (28) and use Tooling (A) and a suitable lifting device to lift off housing (26) .
The housing (26) weighs approximately 113 kg (250 lb)
Illustration 25 g03033502
24. Remove seal (29) and bearing assemblies (30) .
11/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 26 g03353991
25. Remove race (32) and seal (31) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 1 14:52:55 UTC+0800 2020
12/12
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i05271457
Final Drive - Assemble
SMCS - 4050-016
S/N - GGH1-UP
S/N - HHK1-UP
S/N - J6D1-UP
S/N - JRX1-UP
S/N - NBN1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
B 8T-0226 Bolt 2
D 150-1782 Crossblock 1
E
1P-0520 Driver Gp 1
1P-0510 Driver Gp
F 123-8527 Adapter 1
G 132-8122 TorqueWrench 1
3S-6224 Electric Hydraulic Pump Gp 1
1/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 8H-8535 1 1/4 Socket 1
J 126-7183 Crossblock 1
L 417-6239 Lifting Adapter 1
M - Loctite 242 -
N 8T-9206 Duo Cone Installer As 1
Illustration 1 g03353991
1. Install spacer (33) . Use Tooling (N) to install seal (31) . Install race (32) .
Illustration 2 g03039360
2. Use Tooling (N) to install seal (29) . Install bearing assemblies (30) .
2/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 3 g03039376
3. Use Tooling (A) and a suitable lifting device to position housing (26) onto the hub (27) .
The weight of housing (26) is approximately 113 kg (250 lb). Install race (28) .
Illustration 4 g03039398
4. Compress retaining ring (25) in order to install plate assembly (24) .
Illustration 5 g03039401
3/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 5. Install gear assemblies (23) .
Illustration 6 g03039405
6. Install housing (22) .
Illustration 7 g03354042
7. Install bolts (21) . Use Tooling (G) and tighten bolts (21) to a torque of 1440 N·m (1062 lb
ft).
4/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 8 g03039410
8. Install gear (20) .
Illustration 9 g03039413
9. Install gear assembly (19) .
Illustration 10 g03039415
5/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 11 g03039418
10. Position shaft (17) in gear assembly (16) and install gear (18) .
Illustration 12 g03039420
11. Install gear assembly (16) .
Illustration 13 g03039422
6/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. 12. Install o-ring (15) onto cover (13) .
Illustration 14 g03353916
13. Use Tooling (L) to position cover (13) .
Illustration 15 g03039426
14. Apply Tooling (M) to bolts (14) and install. Tighten bolts (14) to a torque of 190 N·m (140
lb ft).
7/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 16 g03039429
15. Use Tooling (A) and a suitable lifting device to reposition final drive (1) . The weight of
final drive (1) is approximately 435 kg (960 lb).
Illustration 17 g03039432
16. Install gear (12) ( not shown ) and seals (11) .
Illustration 18 g03039433
8/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 19 g03039435
17. Install discs (9) and plates (10) .
Illustration 20 g03039437
18. Install piston (8) and springs (7) .
9/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 21 g03353878
Illustration 22 g03353852
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Position spring retainer (6) and retaining ring (5) .
20. Use Tooling (C) , (D) , (E) , and (F) to compress spring retainer (6) in order to install
retaining ring (5) .
Illustration 23 g03039456
10/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 21. Install O-ring (4) . Use Tooling (B) to position flange (3) .
Illustration 24 g03039457
22. Install bolts (2) . Tighten bolts (2) to a torque of 215 N·m (159 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 1 14:53:51 UTC+0800 2020
11/11
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02451126
Final Drive and Travel Motor - Remove
SMCS - 4050-011; 4351-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 138-7573 Link Bracket 1
Note: Put identification marks on all hose assemblies, fittings and ports so that all the components
can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the
fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the
system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g01223707
2/6
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. 1. Remove bolts (1) and cover (2).
2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Illustration 2 g00944947
3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 3 g01223711
4. Disconnect hose assemblies (3) and remove fitting (4).
3/6
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...