This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like races, bearings, gears and housing pieces using the appropriate tools. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like seals, bearings, gears and housing pieces using the appropriate tools. Precautions are noted for releasing spring forces during disassembly and reassembly.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor such as removing the head, brake piston, plates and discs, bearings and seals.
3) Detailed step-by-step instructions for assembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d2 l excavator (prefix eft) service repair manual (eft000...pfiskdmjekm
This document provides instructions for disassembling and assembling the travel motor on 336D2 and 336D2 L Excavator models. The disassembly process involves using various tools to remove 12 components from the motor in sequential order. The assembly process similarly involves installing the components in reverse order using the same tools, ensuring proper alignment and applying thread lock compound as needed. Cleanliness is emphasized throughout.
Caterpillar cat 325 d mobile hyd power unit (prefix c3n) service repair manua...fikkskmmdm
The document provides instructions for removing and installing an alternator from an engine that is still installed in a machine. The procedure involves:
1. Disconnecting the positive battery terminal to prevent wiring damage.
2. Removing the belt from the alternator pulley.
3. Removing bolts securing the alternator and removing it from the engine.
4. Installing the new alternator using the securing bolts and adjusting the belt tension.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...jfksekmmdme
This document provides disassembly and assembly instructions for a travel motor on 324D L and 324D LN excavator models. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor including removing seals, plates, springs, and bearings.
3) Detailed step-by-step instructions for reassembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. It lists 25 steps for disassembly, which include removing bolts, springs, gears, seals and other components. It then lists 25 steps for assembly in reverse order, providing details on installing components like seals, bearings, gears and housing pieces using the appropriate tools. Precautions are noted for releasing spring forces during disassembly and reassembly.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskemdme
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor such as removing the head, brake piston, plates and discs, bearings and seals.
3) Detailed step-by-step instructions for assembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d2 l excavator (prefix eft) service repair manual (eft000...pfiskdmjekm
This document provides instructions for disassembling and assembling the travel motor on 336D2 and 336D2 L Excavator models. The disassembly process involves using various tools to remove 12 components from the motor in sequential order. The assembly process similarly involves installing the components in reverse order using the same tools, ensuring proper alignment and applying thread lock compound as needed. Cleanliness is emphasized throughout.
Caterpillar cat 325 d mobile hyd power unit (prefix c3n) service repair manua...fikkskmmdm
The document provides instructions for removing and installing an alternator from an engine that is still installed in a machine. The procedure involves:
1. Disconnecting the positive battery terminal to prevent wiring damage.
2. Removing the belt from the alternator pulley.
3. Removing bolts securing the alternator and removing it from the engine.
4. Installing the new alternator using the securing bolts and adjusting the belt tension.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...jfksekmmdme
This document provides disassembly and assembly instructions for a travel motor on 324D L and 324D LN excavator models. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor including removing seals, plates, springs, and bearings.
3) Detailed step-by-step instructions for reassembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekdmmem
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and 33 steps to completely disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, sun gears, and housing components. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 336 d2 l excavator (prefix zct) service repair manual (zct000...fjjskekdm
The document provides instructions for disassembling and assembling the main hydraulic pump of a 336D2 L excavator. It lists 51 steps to fully disassemble the pump by removing components like valves, springs, pistons, seals, and bearings. The assembly section lists 13 steps, including installing bearings, covers, pins and pistons back into their original positions. Precautions are provided for working with pressurized springs. Required specialty tools are also listed.
Caterpillar cat 336 d excavator (prefix jbt) service repair manual (jbt00001 ...fjskemdme
The document provides instructions for servicing the piston pump (hydraulic fan) on a 336D excavator. It describes how to remove the fan motor by bending tabs, removing bolts and hub, and lifting the fan motor assembly. It then details disassembling the fan motor by removing the head, port plate, poppet springs, pistons, bearings and other components. Reassembly instructions are also provided, describing how to install components in reverse order and noting any special tools or precautions needed.
Caterpillar cat 330 d excavator (prefix eah) service repair manual (eah00001 ...hhjsekmdmm
This document provides instructions for disassembling and assembling the swing drive of 330D and 330D L excavator models. The disassembly procedure involves removing 17 parts from the swing drive including the cover, carrier assemblies, gears, and housing. The assembly procedure describes installing these 17 parts in the reverse order and includes cleaning, lubricating, and setting components into place using various tools. Proper alignment and torque specifications are noted throughout.
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...fjkskedmme
The document provides instructions for disassembling and assembling the travel motor of a 390F excavator. It describes 40 steps to disassemble the various components of the travel motor including removing the head, relief valves, spools, pistons, plates, seals and bearings. It then describes 36 steps for reassembling the components in reverse order, making sure to align marks and reinstall parts in their original locations. Precautions are provided regarding spring loaded components.
Caterpillar cat 330 c l excavator (prefix jab) service repair manual (jab0000...hhjsekmdmm
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
1. The document provides instructions for removing and installing the flywheel and crankshaft rear seal on a Caterpillar 323 excavator with a C7.1 engine.
2. To remove the flywheel, bolts must first be removed and guide studs installed before lifting the flywheel off using a lifting device. The flywheel ring gear can then be removed by heating and punching.
3. Flywheel installation requires cleaning, installing the ring gear by heating and pressing it on, checking the rear seal for leaks, lifting the flywheel onto guide studs and torquing the bolts.
Caterpillar cat 336 e excavator (prefix t3z) service repair manual (t3z00001 ...f8isoeidkdk
This document provides instructions for disassembling and assembling the travel motor of a 336E excavator. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, plates, and seals. The assembly process reverses the disassembly steps and provides details on lubricating parts and ensuring proper alignment of components like the cam plate and brake piston. Special tools are required for tasks like removing the rotating assembly and installing seals and bearings.
Caterpillar cat 318 c excavator (prefix mdy) service repair manual (mdy00001 ...fjskekdmjekm
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps for disassembly, including removing components like the cover, carrier assembly, ring gears, and seals. It then lists 4 notes about cleanliness and applying lubricants before presenting 29 steps for assembly, reversing the disassembly process and adding components like bearings and seals.
Caterpillar cat 416 d backhoe loader (prefix bfp) service repair manual (bfp1...fujsjefjsekkem
The document provides instructions for disassembling and assembling the transmission of a 416D Backhoe Loader. It lists the required tools and gives step-by-step details on how to remove each transmission component and reassemble it. The transmission is disassembled into its major components, which are then further disassembled into individual parts like gears, shafts, seals and housings. Precautions are given to ensure cleanliness during disassembly and assembly.
Caterpillar cat 442 d backhoe loader (prefix tbd) service repair manual (tbd0...fjsjjfkskeme
This document provides instructions for disassembling and assembling the transmission of a Caterpillar 442D backhoe loader. It lists the required tools and steps to disassemble the transmission case and various internal components such as shafts, gears, bearings, and pistons. The assembly procedure is also outlined.
Caterpillar cat 330 c fm excavator (prefix b3m) service repair manual (b3m000...hhjsekmdmm
This document contains instructions for removing and installing various components on a 330C FM Excavator including:
1) The air compressor drive gear which involves removing a nut, washer and gear from the air compressor.
2) Releasing hydraulic pressure from single or multiple circuits by moving components and levers to release pressure before disconnecting lines.
3) Removing the batteries which requires disconnecting cables and removing covers.
4) Removing the alternator which involves disconnecting wiring, removing a belt with a tool, and removing a bolt from a guard.
Caterpillar cat 326 d2 l excavator (prefix hm4) service repair manual (hm4000...fjsjekkmdmme
The document provides instructions for disassembling a travel motor. It involves 28 steps including removing the head, port plate, springs, pistons, seals, and other components. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, a bearing puller group, and other specialized tools to remove components in a specific sequence while taking safety precautions for parts under spring pressure.
The document provides assembly instructions for installing a swing gear and bearing on an excavator. It lists required tools and parts. The procedure involves cleaning the swing gear and bearing, applying lubricant and sealant, lifting it into position using links, and securing it with bolts torqued to specification. Inner and outer dust seals are installed in seal grooves before completing reassembly of the undercarriage frame.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...zan2736ban
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, springs, gears, seals and housings. The 22 step assembly procedure describes installing these same components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, plates, and housings. The 21 step assembly procedure describes installing these components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, springs, gears, seals and housings. The 22 step assembly procedure describes installing these same components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekdmmem
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and 33 steps to completely disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, sun gears, and housing components. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 336 d2 l excavator (prefix zct) service repair manual (zct000...fjjskekdm
The document provides instructions for disassembling and assembling the main hydraulic pump of a 336D2 L excavator. It lists 51 steps to fully disassemble the pump by removing components like valves, springs, pistons, seals, and bearings. The assembly section lists 13 steps, including installing bearings, covers, pins and pistons back into their original positions. Precautions are provided for working with pressurized springs. Required specialty tools are also listed.
Caterpillar cat 336 d excavator (prefix jbt) service repair manual (jbt00001 ...fjskemdme
The document provides instructions for servicing the piston pump (hydraulic fan) on a 336D excavator. It describes how to remove the fan motor by bending tabs, removing bolts and hub, and lifting the fan motor assembly. It then details disassembling the fan motor by removing the head, port plate, poppet springs, pistons, bearings and other components. Reassembly instructions are also provided, describing how to install components in reverse order and noting any special tools or precautions needed.
Caterpillar cat 330 d excavator (prefix eah) service repair manual (eah00001 ...hhjsekmdmm
This document provides instructions for disassembling and assembling the swing drive of 330D and 330D L excavator models. The disassembly procedure involves removing 17 parts from the swing drive including the cover, carrier assemblies, gears, and housing. The assembly procedure describes installing these 17 parts in the reverse order and includes cleaning, lubricating, and setting components into place using various tools. Proper alignment and torque specifications are noted throughout.
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...fjkskedmme
The document provides instructions for disassembling and assembling the travel motor of a 390F excavator. It describes 40 steps to disassemble the various components of the travel motor including removing the head, relief valves, spools, pistons, plates, seals and bearings. It then describes 36 steps for reassembling the components in reverse order, making sure to align marks and reinstall parts in their original locations. Precautions are provided regarding spring loaded components.
Caterpillar cat 330 c l excavator (prefix jab) service repair manual (jab0000...hhjsekmdmm
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
1. The document provides instructions for removing and installing the flywheel and crankshaft rear seal on a Caterpillar 323 excavator with a C7.1 engine.
2. To remove the flywheel, bolts must first be removed and guide studs installed before lifting the flywheel off using a lifting device. The flywheel ring gear can then be removed by heating and punching.
3. Flywheel installation requires cleaning, installing the ring gear by heating and pressing it on, checking the rear seal for leaks, lifting the flywheel onto guide studs and torquing the bolts.
Caterpillar cat 336 e excavator (prefix t3z) service repair manual (t3z00001 ...f8isoeidkdk
This document provides instructions for disassembling and assembling the travel motor of a 336E excavator. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, plates, and seals. The assembly process reverses the disassembly steps and provides details on lubricating parts and ensuring proper alignment of components like the cam plate and brake piston. Special tools are required for tasks like removing the rotating assembly and installing seals and bearings.
Caterpillar cat 318 c excavator (prefix mdy) service repair manual (mdy00001 ...fjskekdmjekm
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps for disassembly, including removing components like the cover, carrier assembly, ring gears, and seals. It then lists 4 notes about cleanliness and applying lubricants before presenting 29 steps for assembly, reversing the disassembly process and adding components like bearings and seals.
Caterpillar cat 416 d backhoe loader (prefix bfp) service repair manual (bfp1...fujsjefjsekkem
The document provides instructions for disassembling and assembling the transmission of a 416D Backhoe Loader. It lists the required tools and gives step-by-step details on how to remove each transmission component and reassemble it. The transmission is disassembled into its major components, which are then further disassembled into individual parts like gears, shafts, seals and housings. Precautions are given to ensure cleanliness during disassembly and assembly.
Caterpillar cat 442 d backhoe loader (prefix tbd) service repair manual (tbd0...fjsjjfkskeme
This document provides instructions for disassembling and assembling the transmission of a Caterpillar 442D backhoe loader. It lists the required tools and steps to disassemble the transmission case and various internal components such as shafts, gears, bearings, and pistons. The assembly procedure is also outlined.
Caterpillar cat 330 c fm excavator (prefix b3m) service repair manual (b3m000...hhjsekmdmm
This document contains instructions for removing and installing various components on a 330C FM Excavator including:
1) The air compressor drive gear which involves removing a nut, washer and gear from the air compressor.
2) Releasing hydraulic pressure from single or multiple circuits by moving components and levers to release pressure before disconnecting lines.
3) Removing the batteries which requires disconnecting cables and removing covers.
4) Removing the alternator which involves disconnecting wiring, removing a belt with a tool, and removing a bolt from a guard.
Caterpillar cat 326 d2 l excavator (prefix hm4) service repair manual (hm4000...fjsjekkmdmme
The document provides instructions for disassembling a travel motor. It involves 28 steps including removing the head, port plate, springs, pistons, seals, and other components. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, a bearing puller group, and other specialized tools to remove components in a specific sequence while taking safety precautions for parts under spring pressure.
The document provides assembly instructions for installing a swing gear and bearing on an excavator. It lists required tools and parts. The procedure involves cleaning the swing gear and bearing, applying lubricant and sealant, lifting it into position using links, and securing it with bolts torqued to specification. Inner and outer dust seals are installed in seal grooves before completing reassembly of the undercarriage frame.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...zan2736ban
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, springs, gears, seals and housings. The 22 step assembly procedure describes installing these same components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, plates, and housings. The 21 step assembly procedure describes installing these components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d0000...fjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, springs, gears, seals and housings. The 22 step assembly procedure describes installing these same components in reverse order and provides torque specifications for fasteners. Tools required include link brackets, crossblocks, drivers, sockets and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, plates, and housings. The 21 step assembly procedure describes installing these same components in reverse order, noting torque specifications and use of locking adhesives. Tools required include link brackets, crossblocks, drivers, sockets, and torque wrenches. Safety precautions are provided for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...jdkskmmdmd1
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure describes how to remove components like bolts, seals, gears, plates, and housings. The assembly section lists 21 steps for installing these same components in reverse order, and notes that some bolts require a torque wrench and threadlocker. Tools required include link brackets, crossblocks, drivers, sockets, and lifting devices to maneuver heavy parts weighing up to 435kg.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual (J6D00001...pwg56547003
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar cat 336 d l excavator (prefix jrx) service repair manual (jrx0000...fjskkkdmem
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly process involves 25 steps to remove components like bolts, flanges, springs, gears, seals and bearings. The assembly process reverses the disassembly with 21 steps and notes to lubricate components and tighten bolts to the specified torques. Tools required include lifting devices, pry bars, crossblocks, adapters and torque wrenches. Personal protective equipment is advised when compressing springs.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fijsekkdmdm2w
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...zan2736ban
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, plates, and housings.
3) The assembly procedure is the reverse of disassembly and provides instructions for installing the components using loctite and torquing bolts to the specified values.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall components in reverse order. Precautions are provided for releasing spring forces.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall the components in reverse order. Precautions are provided for releasing spring forces and proper torque specifications.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components like gears, seals, springs and housings. The assembly procedure reverses the disassembly process in 22 steps and provides torque specifications for reinstalling components. Tools required include link brackets, bolts, crossblocks and drivers to compress springs and position parts.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual Instant D...ze3xiandiao
1) The document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit.
2) The disassembly procedure involves using various tools to remove 25 components of the final drive including gears, seals, springs, and housings.
3) The assembly procedure lists the same 25 components and provides instructions for installing them in reverse order using the same tools.
Similar to Caterpillar cat 336 d l excavator (prefix j6d) service repair manual (j6d00001 and up) (20)
Mc cormick c series c50 tractor service repair manualfjskkkdmem
This document contains parts lists and diagrams for engine, cooling system, hydraulic system, air intake, exhaust, and other components for McCormick C50 and C60 tractors. It includes over 100 individual part numbers with descriptions like "manifold", "hose", "bracket", "bolt", and provides the relevant diagrams to identify each part's location. The document also specifies that it covers replacement parts for C50 and C60 tractors from McCormick.
Massey ferguson mf 274 c crawler parts catalogue manualfjskkkdmem
This document provides part numbers and descriptions for components of a Massey Ferguson 274 C Crawler engine. It includes lists of parts for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, and camshaft. The document contains detailed information on 65 individual parts that make up these engine systems.
Kubota b26 tractor loader backhoe parts catalogue manualfjskkkdmem
This parts book provides information on parts for an engine. It lists part numbers, names, quantities, serial number ranges, and other details across 19 pages covering major engine components like the crankcase, cylinder head, oil pan, camshaft, pistons, and crankshaft. The document also includes notes on country codes that may apply and definitions for column headings on the parts listing pages.
Komatsu wa180 l 3 wheel loader service repair manual sn54001 and upfjskkkdmem
The document provides instructions for removing and installing the starting motor, alternator, and fuel injection pump on an engine. It lists the specific steps to disconnect wiring, remove mounting bolts, and disconnect any fluid lines. Safety precautions are provided, such as parking the machine, lowering attachments, and disconnecting the battery before beginning work.
Cub cadet lt 1045 lawn tractor service repair manualfjskkkdmem
This service manual provides instructions for servicing 1000/1500 Series riding tractors manufactured by MTD Products Inc. It covers a range of models from 2001-2006 with various engines and drive systems. The manual outlines procedures for removing and replacing components like the hood, fenders, deck, drive belts, brakes, and transaxle. Safety notices advise that the manual is intended for trained technicians experienced with outdoor power equipment.
Claas dominator 78 (type 091) combine service repair manualfjskkkdmem
This document provides specifications for the CLAAS Dominator 106 combine harvester, including technical data, dimensions, weights, settings, capacities, and descriptions of components. Key details include the cutterbar widths ranging from 3.90 to 7.50 meters, overall transport width of 4365 to 8025 mm depending on cutterbar size, 6500 liter grain tank capacity, 151 kW six-cylinder engine, hydrostatic ground drive system with variable speeds up to 20 km/h, and straw walker system with six racks and two crankshafts for separation and cleaning.
Claas dominator 76 (type 084) combine service repair manualfjskkkdmem
This document provides specifications for the CLAAS Dominator 106 combine harvester, including technical data, dimensions, weights, settings, capacities, and descriptions of components. Key details include the cutterbar widths ranging from 3.90 to 7.50 meters, overall transport width of 4365 to 8025 mm depending on cutterbar size, 6500 liter grain tank capacity, 151 kW six-cylinder engine, hydrostatic three-gear range transmission, and hydraulic lift system with 180 bar pressure relief valve.
Allis chalmers models 7020 tractor service repair manualfjskkkdmem
This shop manual provides specifications and repair procedures for Allis-Chalmers tractor models 7010 through 7080. It includes an index of repairs by model and starting paragraph number. The condensed service data section lists specifications such as engine details, tune-up procedures, sizes, capacities and clearances for each model. Tightening torques are also provided.
Allis chalmers models 7010 tractor service repair manualfjskkkdmem
This shop manual provides specifications and repair procedures for Allis-Chalmers tractor models 7010 through 7080. It includes an index of repairs by model and starting paragraph. The condensed service data section lists specifications such as engine details, tune-up procedures, sizes, capacities and clearances for each model. Tightening torques are also provided.
New holland w170 d zbar tier2 wheel loader service repair manualfjskkkdmem
This service manual provides information on servicing the W130D and W170D wheel loaders. It contains sections covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, platform/cab, and safety information. The manual instructs technicians on authorized repairs and safety precautions when working on the equipment.
New holland tt75 tier3 engine, 4 wd tractor service repair manualfjskkkdmem
The document is a service manual for tractor models TT55, TT65, and TT75. It contains safety information and instructions for servicing various tractor systems, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, and electrical systems. The manual provides part numbers and diagrams to aid technicians in maintenance and repairs. Safety is emphasized throughout, warning technicians to follow procedures, wear protective equipment, and avoid hazards like operating machinery with the engine running.
New holland tk4040 m tractor service repair manualfjskkkdmem
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland td95 tractor service repair manualfjskkkdmem
This document is the service manual for TD60-TD95 straddle mount model tractors. It contains sections on general information, the engine system, clutches, mechanical transmission (12x4), reverser (12x12), and other systems. Each section provides specifications, views, removal and installation instructions, and troubleshooting information for the components covered. The manual is intended to guide service technicians in repairing and maintaining these tractors.
New holland t7030 tractor service repair manualfjskkkdmem
This document is a service manual that contains contents, introduction, and safety rules sections. It provides information on various tractor systems including primary and secondary hydraulic power systems, pneumatic systems, electrical systems, engine systems, power train systems, travelling systems, and working arm systems. The introduction section emphasizes the importance of following safety precautions and only having authorized personnel conduct repairs. It outlines notices for parts identification and provides general safety rules for conducting maintenance and repairs.
New holland t4030 f tractor service repair manualfjskkkdmem
This service manual provides maintenance and repair information for CNH Industrial T4030F, T4040F, T4050F, and T4060F tractors. It includes specifications, safety procedures, maintenance instructions, and repair procedures for engine systems, transmission, axles, hydraulics, electrical systems, cab components, and more. The manual is intended to guide trained technicians in properly servicing and troubleshooting issues with these tractor models.
New holland t8.330 tractor service repair manualfjskkkdmem
This document is a service manual for CNH America LLC tractor models T8.275, T8.300, T8.330, T8.360, and T8.390 from May 2013. It contains introduction sections on safety rules, basic instructions, torque specifications, and capacities. The bulk of the document provides detailed sections on servicing and repairing the engine, transmission, axles, hydraulics, electrical systems, and other components of the tractors. Each major section includes subsections covering specific subsystems.
New holland t7.230 tractor service repair manualfjskkkdmem
This document is a service manual for CNH Industrial tractor models T7.230, T7.245, T7.260, and T7.270. It provides specifications and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is divided into sections covering specific systems such as the engine, clutch, transmission, front and rear axles, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. It also includes a table linking the tractor models to their engines.
New holland t7.220 power command tractor service repair manualfjskkkdmem
1. Drain fluids like coolant, oil, and transmission fluid.
2. Disconnect wiring harnesses and electrical connections.
3. Disconnect fuel, air, and exhaust lines.
4. Remove components attached to the engine like the cooling fan, air conditioning compressor, and power steering pump.
5. Remove mounting brackets and bolts to separate the engine from the chassis.
New holland t7.185 auto command tractor service repair manualfjskkkdmem
This service manual provides information on servicing various systems for a line of tractor models. The systems covered include hydraulic, pneumatic, electrical, electronic, engine, transmission, axles, brakes, steering, suspension, frame, cab, hitch and working tools. The manual contains specifications, functional descriptions, diagnostic procedures and service instructions.
New holland t7.175 auto command stage iv tractor service repair manualfjskkkdmem
This document is a service manual that provides information on servicing various components of tractor models T7.175 AutoCommandTM, T7.175, T7.190 AutoCommandTM, T7.190, T7.210 AutoCommandTM, T7.210, and T7.225 AutoCommandTM. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork and decals. Each section provides removal and installation instructions, specifications
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i05271119
Final Drive - Disassemble
SMCS - 4050-015
S/N - GGH1-UP
S/N - HHK1-UP
S/N - J6D1-UP
S/N - JRX1-UP
S/N - NBN1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
B 8T-0226 Bolt 2
C
5F-7366 Forcing Screw 1
1A-1935 Full Nut 1
D 150-1782 Crossblock 1
E 5P-8713 Plate 1
F 1P-0510 Driver Gp 1
G 384-8910 Torque Wrench 1
1/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 3S-6224 Electric Hydraulic Pump Gp 1
8H-8535 1 1/4 Socket 1
H 1U-9895 Crossblock 1
J 126-7183 Crossblock 1
K c M14 X 2.0 X 254mm -
L 417-6239 Lifting Adapter 1
Illustration 1 g03032222
1. Use Tooling (A) and a suitable lifting device in order to position final drive (1) . The weight
of final drive (1) is approximately 435 kg (960 lb).
Illustration 2 g03353849
2. Remove bolts (2) .
2/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g03034835
3. Use Tooling (B) and suitable pry bar to remove flange (3) . Remove o-ring (4) from flange
(3) .
Illustration 4 g03353852
Illustration 5 g03353878
3/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Use Tooling (C) , (D) , (E) , and (F) to compress spring retainer (6) .
5. Remove retaining ring (5) .
6. Remove spring retainer (6) .
Illustration 6 g03353908
7. Remove springs (7) and piston (8) . Remove gear (12) (not shown) .
4/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 7 g03032756
Illustration 8 g03032757
8. Remove discs (9) and plates (10) .
Illustration 9 g03033059
9. Remove seals (11) and gear (12) .
5/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g03033061
10. Use Tooling (A) and a suitable lifting device to reposition final drive (1) . The weight of
final (1) is approximately 435kg (960 lb).
Illustration 11 g03033065
11. Remove bolts (14) . Use a suitable lifting device to remove cover (13) .
Illustration 12 g03353916
12. The weight of cover (13) is approximately 73 kg (160 lb).
6/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 13 g03033067
13. Remove o-ring (15) from cover (13) .
Illustration 14 g03033069
14. Remove gear assembly (16) .
Illustration 15 g03033299
7/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 16 g03033318
15. Remove gear (18) from shaft (17) .
Illustration 17 g03033321
16. Remove gear assembly (19) .
Illustration 18 g03033322
8/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 17. Remove gear (20) .
Illustration 19 g03353922
18. Use Tooling (G) to remove bolts (21) . Bolts (21) may need the temperature raised for
assisting removal. (Note: disregard bolts (21) .)
Illustration 20 g03033380
19. Remove housing (22) .
9/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 21 g03033496
20. Remove gear assemblies (23) .
Illustration 22 g03033497
21. Compress retaining ring (25) in order to remove plate assembly (24) .
Illustration 23 g03033498
22. Use Tooling (C) , (H, and) (J) in order to separate housing (26) from hub (27) .
10/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 24 g03033500
23. Remove race (28) and use Tooling (A) and a suitable lifting device to lift off housing (26) .
The housing (26) weighs approximately 113 kg (250 lb)
Illustration 25 g03033502
24. Remove seal (29) and bearing assemblies (30) .
11/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 26 g03353991
25. Remove race (32) and seal (31) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 1 14:52:55 UTC+0800 2020
12/12336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i05271457
Final Drive - Assemble
SMCS - 4050-016
S/N - GGH1-UP
S/N - HHK1-UP
S/N - J6D1-UP
S/N - JRX1-UP
S/N - NBN1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
B 8T-0226 Bolt 2
D 150-1782 Crossblock 1
E
1P-0520 Driver Gp 1
1P-0510 Driver Gp
F 123-8527 Adapter 1
G 132-8122 TorqueWrench 1
3S-6224 Electric Hydraulic Pump Gp 1
1/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 8H-8535 1 1/4 Socket 1
J 126-7183 Crossblock 1
L 417-6239 Lifting Adapter 1
M - Loctite 242 -
N 8T-9206 Duo Cone Installer As 1
Illustration 1 g03353991
1. Install spacer (33) . Use Tooling (N) to install seal (31) . Install race (32) .
Illustration 2 g03039360
2. Use Tooling (N) to install seal (29) . Install bearing assemblies (30) .
2/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 3 g03039376
3. Use Tooling (A) and a suitable lifting device to position housing (26) onto the hub (27) .
The weight of housing (26) is approximately 113 kg (250 lb). Install race (28) .
Illustration 4 g03039398
4. Compress retaining ring (25) in order to install plate assembly (24) .
Illustration 5 g03039401
3/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 5. Install gear assemblies (23) .
Illustration 6 g03039405
6. Install housing (22) .
Illustration 7 g03354042
7. Install bolts (21) . Use Tooling (G) and tighten bolts (21) to a torque of 1440 N·m (1062 lb
ft).
4/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 8 g03039410
8. Install gear (20) .
Illustration 9 g03039413
9. Install gear assembly (19) .
Illustration 10 g03039415
5/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 11 g03039418
10. Position shaft (17) in gear assembly (16) and install gear (18) .
Illustration 12 g03039420
11. Install gear assembly (16) .
Illustration 13 g03039422
6/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. 12. Install o-ring (15) onto cover (13) .
Illustration 14 g03353916
13. Use Tooling (L) to position cover (13) .
Illustration 15 g03039426
14. Apply Tooling (M) to bolts (14) and install. Tighten bolts (14) to a torque of 190 N·m (140
lb ft).
7/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 16 g03039429
15. Use Tooling (A) and a suitable lifting device to reposition final drive (1) . The weight of
final drive (1) is approximately 435 kg (960 lb).
Illustration 17 g03039432
16. Install gear (12) ( not shown ) and seals (11) .
Illustration 18 g03039433
8/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 19 g03039435
17. Install discs (9) and plates (10) .
Illustration 20 g03039437
18. Install piston (8) and springs (7) .
9/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 21 g03353878
Illustration 22 g03353852
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Position spring retainer (6) and retaining ring (5) .
20. Use Tooling (C) , (D) , (E) , and (F) to compress spring retainer (6) in order to install
retaining ring (5) .
Illustration 23 g03039456
10/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 21. Install O-ring (4) . Use Tooling (B) to position flange (3) .
Illustration 24 g03039457
22. Install bolts (2) . Tighten bolts (2) to a torque of 215 N·m (159 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 1 14:53:51 UTC+0800 2020
11/11336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY ...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 336D L MOBILE HYD POWER UNIT J6D
Configuration: 336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02451126
Final Drive and Travel Motor - Remove
SMCS - 4050-011; 4351-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 138-7573 Link Bracket 1
Note: Put identification marks on all hose assemblies, fittings and ports so that all the components
can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the
fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the
system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g01223707
2/6336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. 1. Remove bolts (1) and cover (2).
2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Illustration 2 g00944947
3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 3 g01223711
4. Disconnect hose assemblies (3) and remove fitting (4).
3/6336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C...
2020/9/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...