The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive assembly, including removing hoses, bolts, seals and other parts. Precautions are given regarding weight of components and proper torque specifications for reinstallation. Detailed illustrations accompany each step of disassembly and assembly.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive assembly, including removing hoses, bolts, seals and other parts. Precautions are given regarding weight of components and proper torque specifications for reinstallation. Detailed illustrations accompany each step of disassembly and assembly.
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...cdsasw
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools required include various bolts, pins, adapters and pullers to securely hold parts in place and remove components. The process is detailed with illustrations to clearly show each step and ensure correct reassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...cdsasw
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...cdsasw
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing fasteners, and installing replacement parts in the reverse order of removal while applying sealants and lubricants as specified. Safety precautions are provided regarding working on hot or high voltage components and preventing fluid contamination.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided to prevent injury. Tools needed are also listed.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Detailed steps and illustrations are provided for each part. The assembly section similarly outlines 28 steps to reinstall the components in reverse order using the appropriate tools. Safety precautions are noted throughout regarding spring-loaded parts.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, sun gear, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Precautions are outlined to safely release spring forces. The assembly procedure instructs installing the same 27 components in reverse order and notes proper lubrication and torque specifications. Tools required are listed for each step.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, including installing seals, the brake piston, rotating assembly, springs, and head. Precautions are provided to prevent injury from spring forces. Tools required are also listed.
Caterpillar cat 336 e lh excavator (prefix hdw) service repair manual (hdw000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e h excavator (prefix jea) service repair manual (jea0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It describes 27 steps to disassemble the motor by removing components like the motor head, seals, springs, brake piston, rotating assembly, bearings and housing cover. It then describes 28 steps for reassembling the motor components in reverse order, making sure to align parts properly, apply lubricants to seals and mating surfaces, and torque fasteners to the specified values. The proper assembly procedure is important to avoid damage and ensure correct functioning of the travel motor.
Caterpillar cat 336 e h excavator (prefix hdw) service repair manual (hdw0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. The assembly section lists 19 steps to reinstall these components in reverse order, noting proper installation of keys, seals, springs and ensuring notches align. Tools required are also listed.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to contain pressurized fluids.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. It then lists 19 steps for assembly, installing components like seals, pistons, bearings, springs and housing pieces in the reverse order of disassembly. Safety notices are provided throughout to warn of pinch points and released spring forces during the procedures. Required tools are listed for both disassembly and assembly.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolts, pins, pullers, pry bars and other equipment to carefully take apart the motor while maintaining proper orientation of parts for reassembly.
Caterpillar cat 336 d2 l excavator (prefix hbk) service repair manual (hbk000...cdsasw
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to aid reassembly.
Caterpillar cat 336 d2 l excavator (prefix fbt) service repair manual (fbt000...cdsasw
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions and illustrations are provided for each component. Safety precautions are noted throughout.
Caterpillar cat 336 d2 l excavator (prefix faj) service repair manual (faj000...cdsasw
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to ensure correct reassembly.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...cdsasw
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools required include various bolts, pins, adapters and pullers to securely hold parts in place and remove components. The process is detailed with illustrations to clearly show each step and ensure correct reassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...cdsasw
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...cdsasw
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing fasteners, and installing replacement parts in the reverse order of removal while applying sealants and lubricants as specified. Safety precautions are provided regarding working on hot or high voltage components and preventing fluid contamination.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided to prevent injury. Tools needed are also listed.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Detailed steps and illustrations are provided for each part. The assembly section similarly outlines 28 steps to reinstall the components in reverse order using the appropriate tools. Safety precautions are noted throughout regarding spring-loaded parts.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, sun gear, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Precautions are outlined to safely release spring forces. The assembly procedure instructs installing the same 27 components in reverse order and notes proper lubrication and torque specifications. Tools required are listed for each step.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, including installing seals, the brake piston, rotating assembly, springs, and head. Precautions are provided to prevent injury from spring forces. Tools required are also listed.
Caterpillar cat 336 e lh excavator (prefix hdw) service repair manual (hdw000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e h excavator (prefix jea) service repair manual (jea0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It describes 27 steps to disassemble the motor by removing components like the motor head, seals, springs, brake piston, rotating assembly, bearings and housing cover. It then describes 28 steps for reassembling the motor components in reverse order, making sure to align parts properly, apply lubricants to seals and mating surfaces, and torque fasteners to the specified values. The proper assembly procedure is important to avoid damage and ensure correct functioning of the travel motor.
Caterpillar cat 336 e h excavator (prefix hdw) service repair manual (hdw0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. The assembly section lists 19 steps to reinstall these components in reverse order, noting proper installation of keys, seals, springs and ensuring notches align. Tools required are also listed.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to contain pressurized fluids.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. It then lists 19 steps for assembly, installing components like seals, pistons, bearings, springs and housing pieces in the reverse order of disassembly. Safety notices are provided throughout to warn of pinch points and released spring forces during the procedures. Required tools are listed for both disassembly and assembly.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolts, pins, pullers, pry bars and other equipment to carefully take apart the motor while maintaining proper orientation of parts for reassembly.
Caterpillar cat 336 d2 l excavator (prefix hbk) service repair manual (hbk000...cdsasw
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to aid reassembly.
Caterpillar cat 336 d2 l excavator (prefix fbt) service repair manual (fbt000...cdsasw
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions and illustrations are provided for each component. Safety precautions are noted throughout.
Caterpillar cat 336 d2 l excavator (prefix faj) service repair manual (faj000...cdsasw
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to ensure correct reassembly.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E LH EXCAVATOR GNY
Configuration: 336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator Machine Systems
Media Number -UENR0190-01 Publication Date -01/10/2014 Date Updated -04/11/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 23 23:53:07 UTC+0800 2020
10/10
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWER...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E LH EXCAVATOR GNY
Configuration: 336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator Machine Systems
Media Number -UENR0190-01 Publication Date -01/10/2014 Date Updated -04/11/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 23 23:54:02 UTC+0800 2020
5/5
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E LH EXCAVATOR GNY
Configuration: 336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator Machine Systems
Media Number -UENR0190-01 Publication Date -01/10/2014 Date Updated -04/11/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 23 23:54:58 UTC+0800 2020
8/8
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E LH EXCAVATOR GNY
Configuration: 336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator Machine Systems
Media Number -UENR0190-01 Publication Date -01/10/2014 Date Updated -04/11/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERE...
2020/7/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...