This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. It then lists 19 steps for assembly, installing components like seals, pistons, bearings, springs and housing pieces in the reverse order of disassembly. Safety notices are provided throughout to warn of pinch points and released spring forces during the procedures. Required tools are listed for both disassembly and assembly.
Caterpillar cat 336 f excavator (prefix nbl) service repair manual (nbl00001 ...fjsqazkekdmme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. It describes 30 steps to disassemble the travel motor, removing components like springs, seals, plates, and housing pieces. It then describes 31 steps to reassemble the travel motor, replacing components in the reverse order and noting specifics like torque settings and lubrication points. The overall document provides detailed instructions to take apart and rebuild the travel motor.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...fujskekfmsme
This document provides disassembly and assembly instructions for the travel motor on a 390D Excavator. It details 40 steps to disassemble the travel motor by removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. It then lists 13 steps for reassembling the travel motor, applying oil to components and ensuring cleanliness during assembly.
The document provides instructions for disassembling the travel motor of an excavator model 326D2. It involves 28 steps including removing the head, brake piston, plates and discs, seals, bearings, and other components. Various tools are required including an adapter, bolts, retaining ring pliers, and a bearing puller group. Safety precautions are provided regarding spring forces.
Caterpillar cat 313 b cr excavator (prefix bas) service repair manual (bas000...fjkskefksmeme
This document provides instructions for disassembling and assembling the final drive, travel motor, and travel brake valve on a 313B excavator. It lists 27 steps to disassemble the travel brake valve, including removing o-rings, springs, and other components. 20 steps are provided to disassemble the travel motor, such as removing friction plates, piston shoes, and o-rings. 50 steps describe disassembling the final drive, which involves removing gears, bearings, seals, and other parts. The document is intended as a service repair manual for technicians working on this excavator model.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix jr8) service ...fujsjejfkskekem
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D8R track-type tractor. It outlines 31 steps to disassemble the components, removing parts like the planetary group, brake hub, friction discs, pins and seals. It then outlines 28 steps for assembly, including installing new parts like bearings and seals and reassembling components like the carrier, housing and brake hub. Precautions are provided around spring pressure and recommended temperatures for installing bearings. Diagrams illustrate each step.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
Caterpillar cat 390 f l excavator (prefix gay) service repair manual (gay0000...fujskekfmsme
This document provides instructions to disassemble a travel motor on a 390F L excavator. It lists 40 steps to completely disassemble the travel motor, removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. Detailed illustrations accompany each step to show how to position the component for removal and what tools are required. Safety notices are included to warn of potential hazards like stored energy in springs.
Caterpillar cat 336 f excavator (prefix nbl) service repair manual (nbl00001 ...fjsqazkekdmme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. It describes 30 steps to disassemble the travel motor, removing components like springs, seals, plates, and housing pieces. It then describes 31 steps to reassemble the travel motor, replacing components in the reverse order and noting specifics like torque settings and lubrication points. The overall document provides detailed instructions to take apart and rebuild the travel motor.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...fujskekfmsme
This document provides disassembly and assembly instructions for the travel motor on a 390D Excavator. It details 40 steps to disassemble the travel motor by removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. It then lists 13 steps for reassembling the travel motor, applying oil to components and ensuring cleanliness during assembly.
The document provides instructions for disassembling the travel motor of an excavator model 326D2. It involves 28 steps including removing the head, brake piston, plates and discs, seals, bearings, and other components. Various tools are required including an adapter, bolts, retaining ring pliers, and a bearing puller group. Safety precautions are provided regarding spring forces.
Caterpillar cat 313 b cr excavator (prefix bas) service repair manual (bas000...fjkskefksmeme
This document provides instructions for disassembling and assembling the final drive, travel motor, and travel brake valve on a 313B excavator. It lists 27 steps to disassemble the travel brake valve, including removing o-rings, springs, and other components. 20 steps are provided to disassemble the travel motor, such as removing friction plates, piston shoes, and o-rings. 50 steps describe disassembling the final drive, which involves removing gears, bearings, seals, and other parts. The document is intended as a service repair manual for technicians working on this excavator model.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix jr8) service ...fujsjejfkskekem
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D8R track-type tractor. It outlines 31 steps to disassemble the components, removing parts like the planetary group, brake hub, friction discs, pins and seals. It then outlines 28 steps for assembly, including installing new parts like bearings and seals and reassembling components like the carrier, housing and brake hub. Precautions are provided around spring pressure and recommended temperatures for installing bearings. Diagrams illustrate each step.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
Caterpillar cat 390 f l excavator (prefix gay) service repair manual (gay0000...fujskekfmsme
This document provides instructions to disassemble a travel motor on a 390F L excavator. It lists 40 steps to completely disassemble the travel motor, removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. Detailed illustrations accompany each step to show how to position the component for removal and what tools are required. Safety notices are included to warn of potential hazards like stored energy in springs.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed in a table at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of potential injuries from parts under spring tension or residual fluid pressure. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 330 f excavator (prefix jfr) service repair manual (jfr00001 ...fjskekdmjekm
This document provides instructions for disassembling and assembling a final drive for 330F and 330F LN excavators. The disassembly procedure involves using various tools to remove 37 individual parts from the final drive assembly, including gears, shafts, housings, seals and bearings. The assembly procedure instructs putting the final drive back together in reverse order and adjusting the bearing preload using shims to achieve the proper clearance. Precise tools and torque specifications are required to correctly reassemble the 550 kg final drive transmission.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to safely release spring forces.
This document provides instructions for disassembling various components of a 313D2 excavator, including the final drive, travel motor, counterbalance valve, and barrel assembly. It lists required tools and outlines multi-step procedures involving draining fluids, removing fittings and fasteners, using pullers to remove bearings, and noting part locations and orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy lifting, and released spring forces.
Caterpillar cat 330 d fm excavator (prefix h3k) service repair manual (h3k000...jfdskekdmme
This document provides disassembly instructions for the final drive of a 330D FM excavator. It lists over 40 steps to completely disassemble the final drive and its components. This includes removing the travel motor, draining fluids, removing sprockets, planetary gear assemblies, carrier assemblies, discs, plates, springs, and other parts. Detailed illustrations are provided to identify each component. Special tools are required to remove retaining rings, bearings, and other secured pieces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 320 d lrr excavator (prefix gkl) service repair manual (gkl00...fjkskedmme
The document provides instructions for checking bearing clearances on excavator engines. It describes the required plastic gauge tools and notes that Cat does not recommend checking actual clearances due to the risk of damage or inaccurate results. It provides guidelines for using the plastic gauges including ensuring clean, dry surfaces and proper seating of bearing tabs. Technicians are instructed to insert a gauge between the crown of the bearing and cap to check clearance.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 320 c excavator (prefix ega) service repair manual (ega00001 ...ufjjsejkkemmd
This document provides instructions for disassembling and assembling the travel motor on a 320C excavator. It includes 28 steps for disassembly and 27 steps for assembly. Key steps include removing the piston motor, traction control valve, various seals, bearings, and internal components. Assembly involves installing these parts in reverse order and adjusting shims to ensure the output shaft meets torque and rotation requirements during checks. Proper cleaning, lubrication, and torque specifications are noted throughout.
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...cdsasw
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools required include various bolts, pins, adapters and pullers to securely hold parts in place and remove components. The process is detailed with illustrations to clearly show each step and ensure correct reassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...cdsasw
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...cdsasw
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing fasteners, and installing replacement parts in the reverse order of removal while applying sealants and lubricants as specified. Safety precautions are provided regarding working on hot or high voltage components and preventing fluid contamination.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided to prevent injury. Tools needed are also listed.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Detailed steps and illustrations are provided for each part. The assembly section similarly outlines 28 steps to reinstall the components in reverse order using the appropriate tools. Safety precautions are noted throughout regarding spring-loaded parts.
Caterpillar cat 336 e lnh excavator (prefix gny) service repair manual (gny00...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, sun gear, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Precautions are outlined to safely release spring forces. The assembly procedure instructs installing the same 27 components in reverse order and notes proper lubrication and torque specifications. Tools required are listed for each step.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, including installing seals, the brake piston, rotating assembly, springs, and head. Precautions are provided to prevent injury from spring forces. Tools required are also listed.
Caterpillar cat 336 e lh excavator (prefix hdw) service repair manual (hdw000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e h excavator (prefix jea) service repair manual (jea0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It describes 27 steps to disassemble the motor by removing components like the motor head, seals, springs, brake piston, rotating assembly, bearings and housing cover. It then describes 28 steps for reassembling the motor components in reverse order, making sure to align parts properly, apply lubricants to seals and mating surfaces, and torque fasteners to the specified values. The proper assembly procedure is important to avoid damage and ensure correct functioning of the travel motor.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed in a table at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of potential injuries from parts under spring tension or residual fluid pressure. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 330 f excavator (prefix jfr) service repair manual (jfr00001 ...fjskekdmjekm
This document provides instructions for disassembling and assembling a final drive for 330F and 330F LN excavators. The disassembly procedure involves using various tools to remove 37 individual parts from the final drive assembly, including gears, shafts, housings, seals and bearings. The assembly procedure instructs putting the final drive back together in reverse order and adjusting the bearing preload using shims to achieve the proper clearance. Precise tools and torque specifications are required to correctly reassemble the 550 kg final drive transmission.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to safely release spring forces.
This document provides instructions for disassembling various components of a 313D2 excavator, including the final drive, travel motor, counterbalance valve, and barrel assembly. It lists required tools and outlines multi-step procedures involving draining fluids, removing fittings and fasteners, using pullers to remove bearings, and noting part locations and orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy lifting, and released spring forces.
Caterpillar cat 330 d fm excavator (prefix h3k) service repair manual (h3k000...jfdskekdmme
This document provides disassembly instructions for the final drive of a 330D FM excavator. It lists over 40 steps to completely disassemble the final drive and its components. This includes removing the travel motor, draining fluids, removing sprockets, planetary gear assemblies, carrier assemblies, discs, plates, springs, and other parts. Detailed illustrations are provided to identify each component. Special tools are required to remove retaining rings, bearings, and other secured pieces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 320 d lrr excavator (prefix gkl) service repair manual (gkl00...fjkskedmme
The document provides instructions for checking bearing clearances on excavator engines. It describes the required plastic gauge tools and notes that Cat does not recommend checking actual clearances due to the risk of damage or inaccurate results. It provides guidelines for using the plastic gauges including ensuring clean, dry surfaces and proper seating of bearing tabs. Technicians are instructed to insert a gauge between the crown of the bearing and cap to check clearance.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 320 c excavator (prefix ega) service repair manual (ega00001 ...ufjjsejkkemmd
This document provides instructions for disassembling and assembling the travel motor on a 320C excavator. It includes 28 steps for disassembly and 27 steps for assembly. Key steps include removing the piston motor, traction control valve, various seals, bearings, and internal components. Assembly involves installing these parts in reverse order and adjusting shims to ensure the output shaft meets torque and rotation requirements during checks. Proper cleaning, lubrication, and torque specifications are noted throughout.
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...cdsasw
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools required include various bolts, pins, adapters and pullers to securely hold parts in place and remove components. The process is detailed with illustrations to clearly show each step and ensure correct reassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...cdsasw
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...cdsasw
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing fasteners, and installing replacement parts in the reverse order of removal while applying sealants and lubricants as specified. Safety precautions are provided regarding working on hot or high voltage components and preventing fluid contamination.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided to prevent injury. Tools needed are also listed.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Detailed steps and illustrations are provided for each part. The assembly section similarly outlines 28 steps to reinstall the components in reverse order using the appropriate tools. Safety precautions are noted throughout regarding spring-loaded parts.
Caterpillar cat 336 e lnh excavator (prefix gny) service repair manual (gny00...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...cdsasw
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, sun gear, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...cdsasw
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 different components of the travel motor including the head, springs, brake piston, rotating assembly, and housing cover. Precautions are outlined to safely release spring forces. The assembly procedure instructs installing the same 27 components in reverse order and notes proper lubrication and torque specifications. Tools required are listed for each step.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, including installing seals, the brake piston, rotating assembly, springs, and head. Precautions are provided to prevent injury from spring forces. Tools required are also listed.
Caterpillar cat 336 e lh excavator (prefix hdw) service repair manual (hdw000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...cdsasw
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e h excavator (prefix jea) service repair manual (jea0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It describes 27 steps to disassemble the motor by removing components like the motor head, seals, springs, brake piston, rotating assembly, bearings and housing cover. It then describes 28 steps for reassembling the motor components in reverse order, making sure to align parts properly, apply lubricants to seals and mating surfaces, and torque fasteners to the specified values. The proper assembly procedure is important to avoid damage and ensure correct functioning of the travel motor.
Caterpillar cat 336 e h excavator (prefix hdw) service repair manual (hdw0000...cdsasw
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes installing seals, springs, plates, pistons, bearings and other parts back into their proper positions, taking care to align markings and lubricate components. Tools and torque specifications are provided for each step.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. The assembly section lists 19 steps to reinstall these components in reverse order, noting proper installation of keys, seals, springs and ensuring notches align. Tools required are also listed.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to contain pressurized fluids.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolts, pins, pullers, pry bars and other equipment to carefully take apart the motor while maintaining proper orientation of parts for reassembly.
Caterpillar cat 336 d2 l excavator (prefix hbk) service repair manual (hbk000...cdsasw
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to aid reassembly.
Caterpillar cat 336 d2 l excavator (prefix fbt) service repair manual (fbt000...cdsasw
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions and illustrations are provided for each component. Safety precautions are noted throughout.
Caterpillar cat 336 d2 l excavator (prefix faj) service repair manual (faj000...cdsasw
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to ensure correct reassembly.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 LXE EXCAVATOR NAH
Configuration: 336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D2 Excavator Machine Systems
Media Number -UENR6561-02 Publication Date -01/08/2015 Date Updated -29/10/2018
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 LXE EXCAVATOR NAH
Configuration: 336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D2 Excavator Machine Systems
Media Number -UENR6561-02 Publication Date -01/08/2015 Date Updated -29/10/2018
i06242093
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 243 -
1/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 1 g03870784
1. Install O-ring seal (34) onto the housing of the travel motor.
Illustration 2 g03870780
2. Install seal (33) and piston actuator (32). Lubricate the surfaces of piston actuator (32) with
lubricant that is being sealed.
Illustration 3 g03870779
3. Install backup ring (31) and seal (30).
2/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 4 g03870778
4. Install cover (29) and bolts (28). Tighten bolts (28) to a torque of 28 ± 7 N·m
(248 ± 62 lb in).
Illustration 5 g03870770
5. Apply Tooling (G) to the mating surface of lip seal (27). Use Tooling (E) in order to install
lip seal (27). Lubricate the sealing lip of lip seal (27) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (26).
Illustration 6 g03870766
3/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 7. Rotate the housing.
8. Install keys (25) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (24).
Illustration 7 g03870760
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (23) into the barrel assembly. Install ball (22) onto springs (23). Lubricate
ball (22) with lubricant that is being sealed.
Illustration 8 g03870754
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (21) into barrel assembly (16).
4/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g03870686
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (16).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
6/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 14 g03870820
17. Place the pump housing into Tooling (A).
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
Illustration 15 g03870825
Illustration 16 g03870827
19. The notches in cam plate (20) must align with keys (25). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
8/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 6 08:56:15 UTC+0800 2020
10/10
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 LXE EXCAVATOR NAH
Configuration: 336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D2 Excavator Machine Systems
Media Number -UENR6561-02 Publication Date -01/08/2015 Date Updated -29/10/2018
i07197988
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C 6V-2055 Grease -
D 1P-0510 Driver Gp 1
Illustration 1 g06250080
1. Use a suitable press to press bearing (48) onto shaft (47).
1/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Illustration 2 g06249762
Illustration 3 g06250732
Lip seal orientation.
2. Install lip seal (46).
Illustration 4 g06250082
3. Install O-ring seal (45).
4. Use a soft faced hammer to install shaft assembly (44). Install shaft assembly (44) in the
direction that is indicated by the arrow.
2/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 5 g06249755
Illustration 6 g06249758
5. Use a suitable press and Tooling (D) to install spacers (42), spring (43), and snap ring (41).
3/14
336D2 XE &336D2 LXE Excavators NAH00001-UP (MACHINE) POWERED BY C...
2020/8/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...