This service manual document provides instructions for removing and installing exhaust manifolds, inlet manifolds, valves, and valve guides on Caterpillar 325B L and 325B LN excavator models powered by 3116 engines. The document includes detailed removal and installation procedures, required tools, torque specifications, and illustrations.
Caterpillar cat 325 b l excavator (prefix 4ds) service repair manual (4ds0000...fjjskekdmme
This document provides instructions for removing and installing an exhaust manifold on a 325B L excavator powered by a 3116 engine. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure specifies applying anti-seize compound to mounting studs and high temperature sealer if the manifold has multiple pieces, installing new gaskets, and tightening bolts to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A excavator powered by a 3116 engine. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and torque specifications. Tools required are also listed.
Caterpillar cat 325 track type excavator (prefix 8 jg) service repair manual ...JayHaines2
This document provides instructions for removing and installing an exhaust manifold on a 325-A excavator. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure describes applying anti-seize compound, installing mounting studs and bolts, and tightening to the specified torques. Tools required include an anti-seize compound and high temperature sealer.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...JayHaines2
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A FM L EXCAVATOR 7LM. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and locking tabs, and torquing bolts to the specified values. Tools required are also listed. The document contains illustrations to supplement the written instructions.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to specified torques. Tools required are also listed.
Caterpillar cat 325 b ln excavator (prefix 4ds) service repair manual (4ds000...fjjskekdmme
This document provides instructions for removing and installing an exhaust manifold on a 325B L & 325B LN excavator powered by a 3116 engine. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure specifies applying anti-seize compound to mounting studs and bolts, installing new gaskets, and tightening bolts to the specified torques. Tools and torque specifications are provided. Safety notices are also included to keep parts clean and contain fluids.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...jdfjskekmdme
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove the inlet and exhaust valves, springs, retainers and seals from the cylinder head.
Caterpillar cat 325 b l excavator (prefix 4ds) service repair manual (4ds0000...fjjskekdmme
This document provides instructions for removing and installing an exhaust manifold on a 325B L excavator powered by a 3116 engine. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure specifies applying anti-seize compound to mounting studs and high temperature sealer if the manifold has multiple pieces, installing new gaskets, and tightening bolts to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A excavator powered by a 3116 engine. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and torque specifications. Tools required are also listed.
Caterpillar cat 325 track type excavator (prefix 8 jg) service repair manual ...JayHaines2
This document provides instructions for removing and installing an exhaust manifold on a 325-A excavator. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure describes applying anti-seize compound, installing mounting studs and bolts, and tightening to the specified torques. Tools required include an anti-seize compound and high temperature sealer.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...JayHaines2
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A FM L EXCAVATOR 7LM. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and locking tabs, and torquing bolts to the specified values. Tools required are also listed. The document contains illustrations to supplement the written instructions.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to specified torques. Tools required are also listed.
Caterpillar cat 325 b ln excavator (prefix 4ds) service repair manual (4ds000...fjjskekdmme
This document provides instructions for removing and installing an exhaust manifold on a 325B L & 325B LN excavator powered by a 3116 engine. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure specifies applying anti-seize compound to mounting studs and bolts, installing new gaskets, and tightening bolts to the specified torques. Tools and torque specifications are provided. Safety notices are also included to keep parts clean and contain fluids.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...jdfjskekmdme
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove the inlet and exhaust valves, springs, retainers and seals from the cylinder head.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to specified torques. Tools required are also listed.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...cdfzxs
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove inlet and exhaust valves, springs, retainers, and seals from the cylinder head.
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove inlet and exhaust valves, springs, retainers, and seals from the cylinder head.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...hfjsekekmmd
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are listed to prevent contamination and contain fluids. Required tools are also identified.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are listed to prevent contamination and contain fluids. Required tools are also identified.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are outlined to prevent contamination and contain fluids. Required tools are listed for each job.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing bolts and studs, applying sealant, and torquing fasteners to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...diskkdkdmdm
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing bolts and other fasteners, applying sealant if needed, and reinstalling components in reverse order while torquing bolts to the specified values. Tools required are also listed for each procedure.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
This document provides instructions for removing and installing exhaust manifolds, inlet manifolds, and inlet/exhaust valves on Caterpillar 325, 325L, and 325LN excavators powered by 3116 engines. It describes removing components like bolts, studs, gaskets and manifolds. It also details installing new gaskets and reinstalling components, noting specific torques for bolts. Tools required are listed for tasks like compressing valve springs during valve removal and installation.
John deere 790 compact utility tractor service repair manualfhjsjekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and send it through the fuel filter and then to the injection pump. The injection pump meters the fuel and delivers it at high pressure to the injection nozzles. Excess fuel is returned to the tank. Air enters through the air filter and intake manifold. The cooling system uses a coolant pump to circulate coolant through the engine block and radiator to cool it.
John deere 770 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians.
John deere 756 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
John deere 755 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
John deere 670 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The document provides specifications, repair/removal instructions, and diagnostic information to assist technicians in servicing these tractor models. Safety messages are included throughout and components are organized by system for easy reference.
More Related Content
Similar to Caterpillar cat 325 b ln excavator (prefix 4ds) service repair manual (4ds00001 and up)
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to specified torques. Tools required are also listed.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...cdfzxs
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove inlet and exhaust valves, springs, retainers, and seals from the cylinder head.
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325, 325L, and 325LN excavator models powered by a 3116 engine. It describes removing the bolts and gaskets from the exhaust manifold and cylinder head, and installing new gaskets and bolts. It also details removing the inlet manifold bolts and gaskets, and reinstalling with new gaskets. Finally, it explains using a valve spring compressor tool to remove inlet and exhaust valves, springs, retainers, and seals from the cylinder head.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...hfjsekekmmd
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on Caterpillar 325, 325L, and 325LN excavator models powered by a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening fasteners to the specified torques. Tools required are also listed.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are listed to prevent contamination and contain fluids. Required tools are also identified.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are listed to prevent contamination and contain fluids. Required tools are also identified.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing mounting hardware, and replacing gaskets. Precautions are outlined to prevent contamination and contain fluids. Required tools are listed for each job.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the procedures properly helps prevent contamination and contain fluids.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing bolts and studs, applying sealant, and torquing fasteners to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
Caterpillar cat 325 l excavator (prefix 2sk) service repair manual (2sk00001 ...diskkdkdmdm
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting relevant components, removing bolts and other fasteners, applying sealant if needed, and reinstalling components in reverse order while torquing bolts to the specified values. Tools required are also listed for each procedure.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325 excavator. The removal and installation procedures include disconnecting components, removing mounting hardware, applying sealant or anti-seize compound, and torquing bolts to the specified values. Tools required are also listed. Following the provided steps helps ensure components are properly disassembled and reassembled.
This document provides instructions for removing and installing exhaust manifolds, inlet manifolds, and inlet/exhaust valves on Caterpillar 325, 325L, and 325LN excavators powered by 3116 engines. It describes removing components like bolts, studs, gaskets and manifolds. It also details installing new gaskets and reinstalling components, noting specific torques for bolts. Tools required are listed for tasks like compressing valve springs during valve removal and installation.
Similar to Caterpillar cat 325 b ln excavator (prefix 4ds) service repair manual (4ds00001 and up) (17)
John deere 790 compact utility tractor service repair manualfhjsjekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and send it through the fuel filter and then to the injection pump. The injection pump meters the fuel and delivers it at high pressure to the injection nozzles. Excess fuel is returned to the tank. Air enters through the air filter and intake manifold. The cooling system uses a coolant pump to circulate coolant through the engine block and radiator to cool it.
John deere 770 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians.
John deere 756 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
John deere 755 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
John deere 670 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The document provides specifications, repair/removal instructions, and diagnostic information to assist technicians in servicing these tractor models. Safety messages are included throughout and components are organized by system for easy reference.
John deere 667 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 657 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. It also includes tables listing torque specifications for fasteners and recommendations for hydraulic fittings and O-rings. Additional sections provide information on gasoline and engine oil requirements as well as lubricant types and storage.
John deere 655 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety notices, lubrication specifications, serial number locations, and step-by-step procedures for repairs, removals and installations. Technicians can use this manual as a guide for diagnosis, testing, repair and maintenance of these tractor models.
John deere 647 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 550 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
John deere 365, 375, 380, 380 a, & 390 front blades service repair manualfhjsjekdmme
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications for proper installation.
John deere 300 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
Clark op15 x forklift service repair manualfhjsjekdmme
This document provides service and repair information for an OP15X battery-powered forklift truck. It includes sections on safety, components, maintenance procedures, troubleshooting, and repair/rebuild instructions for systems such as the chassis, operator platform, battery compartment, controls, motors, transmission, brakes, wheels, steering, and hydraulics. Technical specifications and diagrams are provided for identification and repair of parts.
Clark np20 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking/hoisting, mast, specifications, and troubleshooting. It warns that the truck should be checked for damage when received and that only qualified mechanics should perform repairs. It provides operating rules for drivers, including checking the truck before operation and handling loads safely.
Clark np15 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking, mast, specifications, and troubleshooting. The manual instructs mechanics to examine trucks for damage upon arrival and check fluid levels and brakes before operation. It provides warnings for safe operation and outlines rules for qualified operators.
Clark hwx forklift service repair manualfhjsjekdmme
This document provides information about periodic maintenance of HWX/PWX trucks, including:
1. A maintenance schedule listing tasks and suggested intervals for normal, severe, and extreme operating conditions.
2. Details of a planned maintenance program involving inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form for documenting inspections.
Clark hwd 36 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 30 40 se service repair manualfhjsjekdmme
This document provides maintenance schedules and procedures for Clark trucks. It discusses periodic service and planned maintenance, which includes basic inspections, adjustments, and lubrications performed on a scheduled basis, usually every 50-250 hours of operation. The document provides maintenance schedules that specify all maintenance tasks that should be performed periodically, including suggested intervals. It also contains sections covering planned maintenance procedures and inspections to be performed during scheduled maintenance.
Clark hwd 30 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 25 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01928788
Exhaust Manifold - Remove and Install
SMCS - 1059-010
Removal Procedure
Start By:
a. Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Illustration 1 g00652578
Typical example
1. Remove bolts (1), exhaust manifold (2), locks and the gaskets from the cylinder head
assembly.
2. If the engine is equipped with a three-piece exhaust manifold, disassemble exhaust manifold
(2) into three pieces.
3. Remove mounting studs (3) from exhaust manifold (2), if necessary.
1/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound 1
B 2P-2333 High Temperature Sealer 1
Illustration 2 g00652578
Typical example
1. Apply Tooling (A) to the threads of mounting studs (3).
2. Install mounting studs (3). Tighten mounting studs (3) to a torque of 35 ± 5 N·m
(26 ± 4 lb ft).
3. If the engine is equipped with a three-piece exhaust manifold, apply a thin coat of Tooling
(B) to the male ends of exhaust manifold (2). Coat the inside of the female ends of exhaust
manifold (2) with clean engine oil. Assemble exhaust manifold (2) and remove the excess
sealant from the joints.
4. Install new exhaust manifold gaskets.
5. Apply Tooling (A) to the threads of bolts (1). Position the gaskets and exhaust manifold (2)
on the cylinder head assembly. Install locks and bolts (1).
2/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00617739
Typical example of a three-piece exhaust manifold
Illustration 4 g00641026
Exhaust manifold for a Four cylinder engine
3/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g00641092
Water cooled exhaust manifold
6. Tighten bolts (1) in a numerical sequence to a torque of 4 ± 1 N·m (35 ± 9 lb in).
7. Tighten bolts (1) in a numerical sequence to a torque of 45 ± 5 N·m (33 ± 4 lb ft).
Illustration 6 g00675760
Typical example of locking tabs
8. Bend the locking tabs (4) over the flat of each bolt head.
End By:
a. Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:27:10 UTC+0800 2020
4/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01328419
Inlet Manifold - Remove
SMCS - 1058-011
Removal Procedure
Start By:
a. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Dispose of all fluids according to local regulations and mandates.
1. Disconnect air inlet piping from the turbocharger to the aftercooler, if necessary.
Illustration 1 g00629952
2. Remove bolts (1) and disconnect air inlet heater solenoid (3).
3. Remove air inlet elbows (2) from air inlet manifold (5).
4. Remove bolts (4) from air inlet manifold (5).
5. Remove air inlet manifold (5) and the gasket.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:28:06 UTC+0800 2020
2/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01414226
Inlet Manifold - Install
SMCS - 1058-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00675794
1. Install a new gasket (6) on the cylinder head.
Illustration 2 g00629952
2. Position the air inlet manifold (5) on the engine.
3. Install bolts (4). Tighten the bolts to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
4. Install air inlet elbows (2) on air inlet manifold (5).
5. Install bolts (1) and connect air inlet heater solenoid (3).
End By:
a. Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:29:02 UTC+0800 2020
2/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01943334
Inlet and Exhaust Valves - Remove and Install
SMCS - 1105-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Start By:
a. Remove the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the inlet valves, the exhaust valves and the springs,
refer to Guideline For Reusable Parts And Salvage Operations, SEBF8002, "Valves, Valve
Springs, Valve Rotators, and Locks", Guideline For Reusable Parts And Salvage Operations,
SEBF8034, "Valve and Valve Spring Specifications", and Guideline For Reusable Parts And
Salvage Operations, SEBF8162, "Specifications to Measure and Salvage Cylinder Head
Assemblies and Related Components".
1/5
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g01011225
Note: The following components of the exhaust valves are different from the components of
the inlet valves: spring retainer (2), valve spring (3) and valve (5).
Illustration 2 g01011269
1. Use Tooling (A) to compress valve spring (3). Remove retainer lock (1).
2. Remove Tooling (A).
3. Remove spring retainer (2). Remove valve spring (3).
2/5
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 4. Remove valve seal (4) and valve (5).
5. Repeat Steps 1 through 4 in order to remove the remaining inlet valves and exhaust valves.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the inlet valves, the exhaust valves and the springs,
refer to Guideline For Reusable Parts And Salvage Operations, SEBF8002, "Valves, Valve
Springs, Valve Rotators, and Locks", Guideline For Reusable Parts And Salvage Operations,
SEBF8034, "Valve and Valve Spring Specifications", and Guideline For Reusable Parts And
Salvage Operations, SEBF8162, "Specifications to Measure and Salvage Cylinder Head
Assemblies and Related Components".
3/5
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 3 g01011225
1. Lubricate valve (5) with clean engine oil. Install valve (5) in the cylinder head assembly.
Install new valve seal (4) against the valve guide.
2. Place the following items on the valve stem: valve spring (3) and spring retainer (2).
The valve keepers can be thrown from the valve when the valve spring
compressor is released. Ensure that the valve keepers are properly
installed on the valve stem. To help prevent personal injury, keep away
from the front of the valve keepers and valve springs during the
installation of the valves.
Note: A small amount of grease can be used to hold retainer locks (1) in position during
installation.
4/5
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 4 g01011269
3. Use Tooling (A) to compress valve spring (3). Install retainer lock (1).
4. Repeat Steps 1 through 3 in order to install the remaining inlet valves and exhaust valves.
End By:
a. Install the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head -
Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:29:58 UTC+0800 2020
5/5
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01961680
Inlet and Exhaust Valve Guides - Remove and Install
SMCS - 1104-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7793 Valve Guide Driver (1)
1
( 1 )
Part of 1U-6685 Valve Guide Tool Kit
Start By:
A. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the valve guides, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Asseblies 3114, 3116, and
3126 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8162, "Procedure
to Measure and Salvage Cylinder Head Assemblies and Related Components".
1/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g00745735
Typical example
1. Use Tooling (A) to remove the inlet valve guides from the cylinder head assembly. Use
Tooling (A) to remove the exhaust valve guides from the cylinder head assembly.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-7793 Valve Guide Driver (1)
1
B 1U-7792 Guide Collar (1)
1
C 9U-6895 Valve Guide Driver 1
D 149-4008 Guide Collar 1
( 1 )
Part of 1U-6685 Valve Guide Tool Kit
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Note: For information on the reusability of the valve guides, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Assemblies 3114, 3116,
and 3126 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8162,
"Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components".
Illustration 2 g00745782
Typical example
1. Position inlet valve guide (1) and tap on the top of inlet valve guide (1). This is done in
order to start inlet valve guide (1) into the cylinder head assembly.
2. Use Tooling (A) and Tooling (B) to install inlet valve guide (1). Install inlet valve guides
(1) until tooling (B) contacts the cylinder head.
3/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 3 g00745672
Typical example
3. Position exhaust valve guide (2) and tap on the top of exhaust valve guide (2). This is done
in order to start the exhaust valve guide into the cylinder head assembly.
Note: Some of the early engines have inlet valves and exhaust valves that are identical in
size. Use the same specifications and the same tools for both valves. Proceed to Step 4 if the
valves are not the same size.
4. Use Tooling (C) and Tooling (D) to install exhaust valve guide (2). Install inlet valve guides
(2) until tooling (D) contacts the cylinder head.
End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:30:53 UTC+0800 2020
4/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929146
Inlet and Exhaust Valve Seat Inserts - Remove and Install
SMCS - 1103-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1)
6V-4194 Valve Seat Extractor 1
B(1)
165-5647 Valve Seat Extractor 1
C(1)
6V-4804 Handle 1
D(1)
6V-4192 Threaded Shaft 1
E(1)
6V-4199 Lifting Bracket 1
(1)
Part of the 166-7441 Valve Seat Extractor Tool
Start By:
a. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Note: For information on the reusability of the valve seats, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Assemblies 3114, 3116,
and 3126 Engines".
Illustration 1 g00615519
Illustration 2 g00656459
Note: Replace Tooling (A) with Tooling (B) for the removal of the inlet valve seat insert.
1. Install Tooling (A) in the exhaust valve seat insert.
2. Install Tooling (C) and Tooling (D) in Tooling (A). Hand tighten Tooling (D). Tooling (A)
will expand below the edge of valve seat insert (1).
2/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 3 g00656462
3. Install Tooling (E) on the cylinder head under Tooling (C). Hold Tooling (D) while you turn
Tooling (C). Remove valve seat insert (1).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
F 1U-6685 Guide and Insert Tool Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the valve seats, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Assemblies 3114, 3116,
and 3126 Engines".
1. Cool the valve seat inserts for easier installation.
3/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 4 g01003799
2. Turn Tooling (F) upside-down and use Tooling (F) and a press to install the valve seat
inserts in the cylinder head assembly.
3. After the valve seat inserts are installed, grind the inserts to the final specification. Refer to
Guideline for Reusable Parts and Salvage Operation, SEBF8218, "Specifications for
Cylinder Head Assemblies 3114, 3116, and 3126 Engines" for the specifications.
End By:
a. Install the inlet valves and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:31:49 UTC+0800 2020
4/4
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929163
Engine Oil Filter Base - Remove
SMCS - 1306-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench 1
Start By:
a. Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01009468
1. Use Tooling (A) to remove engine oil filter (3).
2. Disconnect the tube assembly for the turbocharger inlet (1) from the engine oil filter base
(4).
3. Remove bolts (2) and the washers that hold engine oil filter base (4) to the cylinder block.
4. Remove engine oil filter base (4) and the gasket.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:32:45 UTC+0800 2020
2/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929612
Engine Oil Filter Base - Disassemble
SMCS - 1306-015
Disassembly Procedure
Start By:
a. Remove the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Remove".
Illustration 1 g01011623
Personal injury can result from being struck by parts propelled by a
released spring force.
1/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove plugs (1) and (3) from oil filter base (2).
Illustration 2 g01011627
2. Remove springs (4) and valves (6). Remove O-ring seals (5) from plugs (1) and (3). Inspect
the parts for wear or damage. If the parts are worn or damaged, use new parts for
replacement.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:33:41 UTC+0800 2020
2/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 4DS
Configuration: 325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929615
Engine Oil Filter Base - Assemble
SMCS - 1306-016
Assembly Procedure
Illustration 1 g01011627
1. Install O-ring seals (5) onto plugs (1) and (3). Install valves (6) and springs (4).
1/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 2 g01011623
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2. Install plugs (1) and (3) onto oil filter base (2).
End By:
a. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 19:34:37 UTC+0800 2020
2/2
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 En...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...