This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It describes:
1) Required tools for the process.
2) Detailed step-by-step instructions for disassembling the final drive components and housing.
3) Instructions for using a final drive disassembly bench to aid in removal of specific parts.
4) Steps for disassembling the main and motor housings.
5) Procedures for assembling the main housing, motor housing, and attaching the two housings.
Caterpillar cat 324 d fm excavator (prefix jkr) service repair manual (jkr000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It begins with a list of required tools. The disassembly procedure describes removing over 20 components of the final drive in detailed steps. It then describes using a special bench and tools to disassemble additional parts. The assembly section provides the reverse steps to reassemble the final drive components back into the main housing and motor housing.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f89siekkmdmm2w
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It describes in 21 steps how to disassemble the final drive components using various tools. It then describes in 13 steps the process for assembling the final drive components and housing, including installing bearings and seals. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and other components back into the final drive housing using various tools. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...shibi1322
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...8foskkdjdkdm3e
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmmdmdm
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps to disassemble the final drive, including removing gears, seals, springs, and other components. It then describes 17 steps for assembling the final drive components using various tools, applying hydraulic pressure to install components like locknuts, and reinstalling parts in reverse order of disassembly.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmdmmdd
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm excavator (prefix jkr) service repair manual (jkr000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It begins with a list of required tools. The disassembly procedure describes removing over 20 components of the final drive in detailed steps. It then describes using a special bench and tools to disassemble additional parts. The assembly section provides the reverse steps to reassemble the final drive components back into the main housing and motor housing.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f89siekkmdmm2w
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It describes in 21 steps how to disassemble the final drive components using various tools. It then describes in 13 steps the process for assembling the final drive components and housing, including installing bearings and seals. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and other components back into the final drive housing using various tools. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...shibi1322
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...8foskkdjdkdm3e
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmmdmdm
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps to disassemble the final drive, including removing gears, seals, springs, and other components. It then describes 17 steps for assembling the final drive components using various tools, applying hydraulic pressure to install components like locknuts, and reinstalling parts in reverse order of disassembly.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmdmmdd
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...yin9niaojiao
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...ifoseidkkd
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like springs, pistons, gears, sprockets, bearings, seals and housings. It also describes 14 steps for assembling components using tools like pullers, drivers and a hydraulic bench. The overall procedure involves carefully removing and installing small parts using various specialized tools to take the final drive apart and rebuild it.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...JayHaines2
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fujsekksmem
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing gears, seals, springs, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fjskkmemem
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install parts like the locknut.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...dikskedmdm
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shun96145luo
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7useijdkdmd1
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...fjdkksmemd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7siejdkdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the process, which includes removing components like the sprocket, planetary gear sets, pistons, and seals. It also describes using a special bench and tooling to remove and install components while applying precise torque levels. The overall procedure involves dismantling the entire final drive assembly down to individual parts and then reassembling it in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...dxem8295569
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskedmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing the sprocket, planetary gear sets, piston, and other components. It also describes using a special bench and tooling to remove the locknut requiring high torque. The assembly procedure is listed but not described in detail.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fhjsjekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tools to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shudun96087
This document provides instructions for disassembling and assembling the final drive on a 324D FM excavator. It lists required tools and parts and provides detailed step-by-step instructions and illustrations for removing components like springs, pistons, gears, and seals. It also describes using a special final drive bench assembly tool to assist with removing the final drive locknut which requires up to 2000 PSI of pressure.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...qme229722
1. The document provides instructions for disassembling and assembling the final drive of a 324D FM excavator.
2. It lists required tools and parts and provides step-by-step procedures with accompanying illustrations for removing components like springs, pistons, gears, and seals from the final drive housing.
3. Reassembly instructions are also provided, showing how to install bearings, seals, and other components back into the housings in the reverse order of disassembly.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...kesi7153062
1. The document provides assembly and disassembly instructions for the final drive of a 324D FM excavator.
2. It details the required tools and parts, and provides a step-by-step procedure to disassemble and assemble the various components of the final drive.
3. The components include the main housing, motor housing, planetary gear sets, sprocket, piston, springs, and other internal parts. Detailed illustrations supplement the assembly/disassembly steps.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It describes in detail how to remove over 20 different components of the final drive including gears, seals, plates, and housing pieces. Detailed illustrations are provided to supplement the text instructions. Specialized tools are listed that are required for tasks like removing retaining rings and planetary gear sets. Proper safety precautions are noted, and references to other documents are provided for additional information.
Caterpillar cat 325 d fm ll excavator (prefix c9m) service repair manual (c9m...kmf9ioseodk
The document provides disassembly and assembly instructions for a final drive on a 325D FM LL EXCAVATOR. It details 21 steps for disassembly, including removing springs, pistons, gears, and other components. It also notes tools required and safety precautions. Assembly is not described in the same level of detail, listing only the assembly procedure title and table of required tools.
This document provides maintenance information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes specifications, planned maintenance schedules, adjustment procedures, and electrical and transmission repair instructions. The planned maintenance section outlines safety checks and lubrication schedules to perform at regular intervals, such as daily, monthly, and yearly, to keep the trucks in good operating condition.
This document provides specifications, maintenance schedules, adjustment procedures, and safety guidelines for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to ensure safe operation and maximize component life. Safety practices for maintenance include properly positioning trucks, disconnecting power sources, and following the manufacturer's procedures. Only trained personnel should perform maintenance following the instructions in this manual.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
More Related Content
Similar to Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR00001 and up).pdf
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...yin9niaojiao
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...ifoseidkkd
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like springs, pistons, gears, sprockets, bearings, seals and housings. It also describes 14 steps for assembling components using tools like pullers, drivers and a hydraulic bench. The overall procedure involves carefully removing and installing small parts using various specialized tools to take the final drive apart and rebuild it.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...JayHaines2
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fujsekksmem
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing gears, seals, springs, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fjskkmemem
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install parts like the locknut.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...dikskedmdm
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shun96145luo
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7useijdkdmd1
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...fjdkksmemd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7siejdkdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the process, which includes removing components like the sprocket, planetary gear sets, pistons, and seals. It also describes using a special bench and tooling to remove and install components while applying precise torque levels. The overall procedure involves dismantling the entire final drive assembly down to individual parts and then reassembling it in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...dxem8295569
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskedmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing the sprocket, planetary gear sets, piston, and other components. It also describes using a special bench and tooling to remove the locknut requiring high torque. The assembly procedure is listed but not described in detail.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fhjsjekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tools to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shudun96087
This document provides instructions for disassembling and assembling the final drive on a 324D FM excavator. It lists required tools and parts and provides detailed step-by-step instructions and illustrations for removing components like springs, pistons, gears, and seals. It also describes using a special final drive bench assembly tool to assist with removing the final drive locknut which requires up to 2000 PSI of pressure.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...qme229722
1. The document provides instructions for disassembling and assembling the final drive of a 324D FM excavator.
2. It lists required tools and parts and provides step-by-step procedures with accompanying illustrations for removing components like springs, pistons, gears, and seals from the final drive housing.
3. Reassembly instructions are also provided, showing how to install bearings, seals, and other components back into the housings in the reverse order of disassembly.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...kesi7153062
1. The document provides assembly and disassembly instructions for the final drive of a 324D FM excavator.
2. It details the required tools and parts, and provides a step-by-step procedure to disassemble and assemble the various components of the final drive.
3. The components include the main housing, motor housing, planetary gear sets, sprocket, piston, springs, and other internal parts. Detailed illustrations supplement the assembly/disassembly steps.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It describes in detail how to remove over 20 different components of the final drive including gears, seals, plates, and housing pieces. Detailed illustrations are provided to supplement the text instructions. Specialized tools are listed that are required for tasks like removing retaining rings and planetary gear sets. Proper safety precautions are noted, and references to other documents are provided for additional information.
Caterpillar cat 325 d fm ll excavator (prefix c9m) service repair manual (c9m...kmf9ioseodk
The document provides disassembly and assembly instructions for a final drive on a 325D FM LL EXCAVATOR. It details 21 steps for disassembly, including removing springs, pistons, gears, and other components. It also notes tools required and safety precautions. Assembly is not described in the same level of detail, listing only the assembly procedure title and table of required tools.
Similar to Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR00001 and up).pdf (19)
This document provides maintenance information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes specifications, planned maintenance schedules, adjustment procedures, and electrical and transmission repair instructions. The planned maintenance section outlines safety checks and lubrication schedules to perform at regular intervals, such as daily, monthly, and yearly, to keep the trucks in good operating condition.
This document provides specifications, maintenance schedules, adjustment procedures, and safety guidelines for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to ensure safe operation and maximize component life. Safety practices for maintenance include properly positioning trucks, disconnecting power sources, and following the manufacturer's procedures. Only trained personnel should perform maintenance following the instructions in this manual.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
Clark C500, Y350 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y300L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark CMP 45 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CMP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CMP 50S Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CGP 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 40 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides information about periodic maintenance schedules for Clark lift trucks. It discusses the terms "periodic service" and "planned maintenance" and how they relate to regularly scheduled maintenance tasks. It provides details on determining appropriate maintenance intervals based on operating conditions. The document includes a service chart that indicates basic maintenance tasks and recommended intervals. It also includes a recommended periodic service schedule chart that lists specific maintenance tasks, the suggested time intervals to perform them, and the service manual group where the task is covered.
Clark C500, Y300S Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their inspection findings and any needed repairs. Safety precautions are listed, such as disconnecting the battery before working on electrical components. A visual inspection of the entire truck is described, including components like the overhead guard, carriage, forks, and hydraulic and electrical systems. Records of inspections should be kept and repairs authorized by the appropriate personnel.
Clark C500, Y225S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance and repair are outlined.
Clark C500, Y180 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
Clark C500, Y250S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y225L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark C500, Y200 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and recommends using a PM report form to document the inspections. Safety precautions are described, such as disconnecting the battery before working on electrical components. A visual inspection process is outlined to check for issues like leaks, loose or damaged parts, and worn components. Inspections of specific systems like the uprights, forks, and hydraulic lines are detailed. Record-keeping of inspection results is advised to aid in maintenance planning.
Clark C15-32C LG Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely maintaining a forklift truck. It describes how to safely raise the truck using blocks or jacks, including lifting the front with chains under the upright rails or jacking under designated frame points. Blocking procedures are outlined to securely support lifted components like the upright for maintenance access. Workers are advised to follow manufacturer safety guidelines and use adequately rated equipment for any lifting, jacking or maintenance tasks.
Caterpillar Cat 336F L Excavator (Prefix RKB) Service Repair Manual (RKB00001...f7useijdkdmd1
This document provides instructions for disassembling the travel motor on a 336F L excavator. It describes 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Tools required include a transmission repair stand, lifting eye assembly, driver group, retaining ring pliers and bearing puller group. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324D FM EXCAVATOR JKR
Configuration: 324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D and 325D Forest Machines Machine Systems
Media Number -KENR5986-02 Publication Date -01/02/2012 Date Updated -27/06/2017
i02568643
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Start By:
a. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Table 1
Required Tools
Tool Part Number Part Description Qty
A
3H-0468 Puller Plate 2
5F-7366 Forcing Screw 1
8B-7548 Push-Puller Tool Gp 1
8T-0070 Bolt 2
8T-3282 Hard Washer 2
B 1P-0520 Driver Gp 1
C 1P-2321 Combination Puller 1
D 138-7573 Link Bracket 3
E
156-7100 Slide Hammer Puller Gp 1
M5x0.8x1.5 Bolt 1
F 10mm Drill 1
G 138-7575 Link Bracket 3
H 199-6557 Spanner Socket 1
1/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. J 127-8458 Final Drive Bench Ar 1
K 127-8468 Reaction Bar As 1
L
3S-6224 Electric Hydraulic Pump Gp 1
8T-0820 Hydraulic Pressure Gauge 1
3B-7722 Pipe Bushing 2
1P-2376 Quick Connect Coupler 2
1P-2377 Dust Plug 2
8F-0024 Hose As 2
M 128-4075 Shaft As 1
N 194-3885 Adapter Plate 1
Illustration 1 g00903052
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. 1. Install Tooling (A) and Tooling (B). Apply slight pressure to plate (1). Remove retaining
ring (2).
2. Carefully remove Tooling (A) and Tooling (B).
3. Remove plate (1).
4. Remove O-ring seal (3).
Illustration 2 g00903050
5. Remove springs (4).
6. Remove piston (5).
Illustration 3 g00903054
a. Remove piston seals (6) from piston (5).
3/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 4 g00903611
7. Remove coupler (7).
8. Remove brake discs (8).
Illustration 5 g00903613
9. Remove bottom brake plate (9).
Illustration 6 g01286968
10. Turn over the final drive.
4/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 11. Attach a suitable lifting device to sprocket (10). The weight of sprocket (10) is
approximately 41 kg (90 lb). Remove sprocket (10).
12. Remove cover (11).
Illustration 7 g00903120
13. Remove sun gear (12). Remove planetary gear set (13). Remove retaining rings (14).
Illustration 8 g00903432
a. Install Tooling (C). Remove gears (15).
5/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 9 g00903928
b. Cut a notch in the bearing cup. Remove one row of bearing rollers through the notch.
After the bearing rollers are out, the remaining parts will drop out. Remove the
retaining ring from the bearing cup.
Illustration 10 g00903433
14. Remove planetary gear set (16).
a. Remove retaining rings (17).
6/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 11 g00903459
b. Install Tooling (C). Remove gear (18).
Illustration 12 g00903465
15. Remove bolts (19).
16. Remove retainer ring (19A).
7/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 13 g01041035
17. Install Tooling (D) and a suitable lifting device to planetary gear set (20). The weight of
planetary gear set (20) is approximately 36 kg (80 lb).
Illustration 14 g00903517
Illustration 15 g00903699
a. Install Tooling (C). Remove gear (21).
b. Remove retaining ring (22).
Illustration 16 g00903703
8/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 18. Rotate ring (23) for one notch.
19. Remove ring (23).
Illustration 17 g00903711
20. Install Tooling (E) into dowel pin (24). Remove dowel pin (24) from locknut (25).
Note: The threads for the nut will be damaged from the dowel pins.
21. Use Tooling (F) to drill the holes in order to remove the damaged threads.
127-8458 Final Drive Disassembly and Assembly Bench
Note: The following procedure is for the 127-8458 Final Drive Disassembly and Assembly
Bench.
Reference: Refer to the Tool Operating Manual, NEHS0673 for further procedures concerning
127-8458 Bench.
Illustration 18 g00910492
1. Remove the suitable lifting device from Tooling (G) and attach the suitable lifting device to
the upper half of Tooling (J).
9/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 2. Remove the upper half of Tooling (J). The weight of the upper half of Tooling (J) is
approximately 816 kg (1800 lb).
3. Install Tooling (N) onto the lower half of Tooling (J). The weight of Tooling (N) is
approximately 100 kg (221 lb).
Illustration 19 g01041039
4. Fasten Tooling (G) and a suitable lifting device to the final drive.
5. Fasten the final drive onto the lower half of Tooling (N).
Illustration 20 g00910490
6. Install bolts (27) in the final drive through adapter ring (26).
10/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 21 g01041044
7. Fasten Tooling (G) and a suitable lifting device to Tooling (H). The weight of Tooling (H)
is approximately 45 kg (100 lb).
8. Lower Tooling (H) into the final drive. Make sure that the notches in nut (25) are aligned
with the keys on Tooling (H).
9. Remove Tooling (I) and the suitable lifting device.
Illustration 22 g00910496
10. Place Tooling (K) onto Tooling (H).
11. Fasten a suitable lifting device to the upper half of Tooling (J) and install the upper half of
Tooling (J) to the lower half of Tooling (J). Pin the two halves together.
11/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 23 g00910497
12. Attach Tooling (L) to the pressure reducing valve manifold, as shown.
13. Set the torque level for the bench to 2000 psi (14500 lb ft). Do not exceed this pressure.
Reference: Refer to the Tool Operating Manual, NEHS0673 for setting the torque level.
Illustration 24 g00910500
14. Place Tooling (M) through the bench and into Tooling (K).
15. Remove locknut (25). The breakaway torque will vary. The nut will loosen usually at
1400 psi (10750 lb ft).
16. Fasten a suitable lifting device to the upper half of Tooling (J).
17. Remove the upper half of Tooling (J).
Disassembly Procedure for the Main Housing and the Motor Housing
12/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 25 g01041039
1. Fasten Tooling (G) and a suitable lifting device to main housing (29), as shown.
2. Separate the main housing (29) from the motor housing (30). The weight of the main
housing is approximately 123 kg (270 lb).
Note: Two outer races and one roller bearing will be removed with the main housing. The
other roller bearing and the two Duo-cone seal kits will remain with the motor housing.
3. Disassemble motor housing (30), as follows:
Illustration 26 g00910506
a. Use two screwdrivers and remove bearing (31) from the motor housing.
b. Remove the Duo-cone seal kit (32) from the motor housing.
13/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 27 g00910508
c. Remove the two backup rings and O-ring seal (33) from the motor housing.
4. Disassemble the main housing (29), as follows:
Illustration 28 g00910510
a. Remove bearing (34) from the main housing (29).
14/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 29 g00910511
b. Turn main housing (29) over 180 degrees, as shown.
c. Remove seal (35).
d. Remove bearing (36).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Aug 8 00:45:45 UTC+0800 2020
15/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324D FM EXCAVATOR JKR
Configuration: 324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D and 325D Forest Machines Machine Systems
Media Number -KENR5986-02 Publication Date -01/02/2012 Date Updated -27/06/2017
i07141171
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 126-3994 Duo-Cone Seal Installer As 1
B 138-7573 Link Bracket 3
C 127-8458 Final Drive Bench Ar 1
D 154-9315 Thread File Group 1
E 138-7575 Link Bracket 2
F 199-6557 Spanner Wrench As 1
G 127-8468 Reaction Bar As 1
H
3S-6224 Electric Hydraulic Pump Gp 1
8T-0820 Hydraulic Pressure Gauge 1
3B-7722 Pipe Bushing 2
1P-2376 Quick Connect Coupler 2
1P-2377 Dust Plug 2
8F-0024 Hose As 2
I 128-4075 Shaft As 1
K 1P-0520 Driver Gp 1
1/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. L 1U-8223 Lifting Sling 2
M
3H-0468 Puller Plate 2
5F-7366 Forcing Screw 1
8B-7548 Push-Puller Tool Gp 1
8T-0070 Bolt 2
8T-3282 Hard Washer 2
1P-0520 Driver Gp 1
Assembly Procedure for the Main Housing
1. Assemble main housing (3), as follows:
Illustration 1 g00911498
a. Install bearing race (2).
b. Install seal (1).
Illustration 2 g00911499
c. Turn main housing (3) over 180 degrees, as shown.
2/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. d. Install bearing (4).
2. Assemble motor housing (6), as follows:
Illustration 3 g00911506
a. Install the two backup rings and O-ring seal (7) in the motor housing.
Illustration 4 g00911509
b. Install bearing (8).
c. Use Tooling (A) to install Duo-cone seal kit (9).
3/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 5 g01041120
3. Place main housing (3) on motor housing (6).
4. Remove Tooling (B) and the suitable lifting device.
Illustration 6 g00913031
5. Use Tooling (D) to clean the threads that are on locknut (10).
6. Install locknut (10).
Illustration 7 g01041121
4/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. 7. Fasten Tooling (E) and a suitable lifting device to Tooling (F).
8. Lower Tooling (F) into the final drive. Make sure that the notches in locknut (10) are
aligned with the keys on Tooling (F). The weight of Tooling (F) is approximately 45 kg
(100 lb).
Illustration 8 g00914371
9. Place Tooling (G) onto Tooling (F).
10. Fasten a suitable lifting device to the upper half of Tooling (C) and install the upper half of
Tooling (C) to the lower half of Tooling (C). Pin the two halves together.
Illustration 9 g00914422
11. Attach Tooling (H) to the pressure reducing valve manifold, as shown.
12. Set the torque level for the bench to 4000 N·m (2950 lb ft). Do not exceed this pressure.
Reference: Refer to the Tool Operating Manual, NEHS0673 for setting the torque level.
5/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 10 g00914423
13. Place Tooling (I) through the bench and into Tooling (G).
Illustration 11 g00913894
14. Install locknut (10). Tighten locknut (10) to a torque of 4000 N·m (2950 lb ft).
15. Fasten a hoist to the upper half of Tooling (C).
16. Remove the upper half of Tooling (C).
6/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 12 g00913936
17. Install dowel pin (11) into locknut (10).
Note: Do not reuse the old holes for the dowel pins.
Illustration 13 g00904392
18. Rotate ring (12) for one notch until the ring locks in place.
Illustration 14 g00904394
7/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 15 g00904395
19. Install retaining ring (15).
20. Install gears (14).
21. Install retaining ring (13).
Illustration 16 g01041133
22. Install Tooling (B) and a suitable lifting device to planetary gear set (16). The weight of
planetary gear set (16) is approximately 36 kg (80 lb). Position the planetary gear set into
the housing.
8/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 17 g00904396
23. Install bolts (17).
Illustration 18 g06234329
Typical Example
24. Install gears (18). Install sun gear (18A) and the retaining ring.
9/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 19 g00904397
25. Install planetary gear set (19).
a. Install retaining ring (20).
Illustration 20 g06234330
26. Install gears (21). Install sun gear (21A) and the retaining ring.
Illustration 21 g00904411
a. Install retaining rings (24). Install planetary gear set (23). Install sun gear (22).
10/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...