The document provides instructions for disassembling a final drive assembly. Key steps include:
1. Marking parts for alignment and securing the assembly to a repair stand using brackets.
2. Removing bolts and covers, lifting off heavy parts like the cover using lifting devices.
3. Dismantling internal components such as gears, plates, and plugs from the housing and covers.
Cleanliness is emphasized to prevent dirt from entering during reassembly.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, weights of parts, and cleaning requirements before disassembly. The overall process breaks the final drive down into its core sub-assemblies and parts.
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with attention to alignment marks and component weights. The carrier assembly, ring gears, and housing components are then further disassembled to access internal planetary gears and bearings.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...jdkskmdmdm
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...ufjksemd8ujd
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fujkskemdmdm4r
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, weights of parts, and cleaning requirements before disassembly. The overall process breaks the final drive down into its core sub-assemblies and parts.
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with attention to alignment marks and component weights. The carrier assembly, ring gears, and housing components are then further disassembled to access internal planetary gears and bearings.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...jdkskmdmdm
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...ufjksemd8ujd
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...fujkskemdmdm4r
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components given their significant weights ranging from 30-550 kg.
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...f8uesjdkdmdm
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...km7seydwuhdw
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...f7fujksekmdm8u
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...prmy389342
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...8ufjsekddm8u
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleaning requirements. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, weights of parts, and cleaning requirements before disassembly. The overall process breaks the final drive down into its core sub-assemblies and parts.
Caterpillar cat 324 d l excavator (prefix mnd) service repair manual (mnd0000...udjdkdkdmm
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleaning requirements. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...ujdkdkdmdm
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar cat 324 d l excavator (prefix mnd) service repair manual (mnd0000...fhhsjdkmem
The document provides instructions for disassembling the final drive of a 324D excavator. It involves removing over 30 individual parts in a specific sequence, including the cover, gears, carrier assembly, planetary carrier, shafts and seals. Cleanliness is important to prevent dirt entering during disassembly. Tools including link brackets, eyebolts and retaining ring pliers are required. The procedure removes components step-by-step and identifies each part and subassembly that must be dismantled from the final drive.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekazswdmme
The document provides instructions for disassembling the final drive of a 324D excavator. It involves removing over 30 individual parts in a specific sequence, including the cover, gears, carrier assembly, planetary carrier, shafts and seals. Cleanliness is important to prevent dirt entering during disassembly. Tools including link brackets, eyebolts, and retaining ring pliers are required. The procedure removes components step-by-step and identifies each part and subassembly that must be dismantled from the final drive.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekdmmem
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and 33 steps to completely disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, sun gears, and housing components. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
The document provides instructions for disassembling a final drive component. It lists required tools and outlines 33 steps to disassemble the final drive. Key steps include removing the cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms. Weights of removed parts are provided.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...yfbr995309
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and removing gears and shafts.
The process separates the final drive into its main individual parts for repair or replacement.
The document provides instructions for disassembling a final drive component. It lists required tools and outlines 33 steps to disassemble the final drive. Key steps include removing the cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering parts. Weights of components are provided to assist with lifting.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...shudun96087
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and separating planetary gears.
The process requires cleaning components and noting part locations for reassembly.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...kesi7153062
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and separating planetary gears.
The process requires cleaning components and noting part locations for reassembly.
The document provides instructions for removing and installing various engine components on a 325C excavator with a 3126B engine, including:
- Removing the camshaft by wiring the valve lifters away, removing retaining bolts and plate, and lifting out the camshaft.
- Installing the camshaft by ensuring timing marks are aligned, installing the retaining plate and bolts, and reinstalling the lifter group and front cover.
- Removing the camshaft gear by wrapping the camshaft, pressing it out of the gear, and removing any key if needed.
- Installing the camshaft gear by heating it, aligning the keyway, and pressing the
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine. It describes removing the lifter group and front cover, turning the crankshaft to top dead center, and wiring the valve lifters away from the camshaft. It then details removing the camshaft retainer plate and bolts and removing the camshaft from the cylinder block. Reinstallation is described as well.
More Related Content
Similar to Caterpillar Cat 324D Excavator (Prefix MND) Service Repair Manual (MND00001 and up).pdf
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...f8uesjdkdmdm
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleanliness. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like pressing out pins and removing thrust washers and gears.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...km7seydwuhdw
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...f7fujksekmdm8u
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...prmy389342
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including link brackets and eyebolts to lift components by weight.
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...8ufjsekddm8u
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleaning requirements. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar Cat 324D and 324D L Excavator (Prefix MND) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, weights of parts, and cleaning requirements before disassembly. The overall process breaks the final drive down into its core sub-assemblies and parts.
Caterpillar cat 324 d l excavator (prefix mnd) service repair manual (mnd0000...udjdkdkdmm
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleaning requirements. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...ujdkdkdmdm
The document provides instructions for disassembling a final drive assembly. Key steps include removing the cover, gears, carrier assembly, planetary carrier, and planetary gears. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations and alignment marks can aid this. Various tools are required, including lifting devices, brackets, retaining ring pliers, and a press.
Caterpillar cat 324 d l excavator (prefix mnd) service repair manual (mnd0000...fhhsjdkmem
The document provides instructions for disassembling the final drive of a 324D excavator. It involves removing over 30 individual parts in a specific sequence, including the cover, gears, carrier assembly, planetary carrier, shafts and seals. Cleanliness is important to prevent dirt entering during disassembly. Tools including link brackets, eyebolts and retaining ring pliers are required. The procedure removes components step-by-step and identifies each part and subassembly that must be dismantled from the final drive.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekazswdmme
The document provides instructions for disassembling the final drive of a 324D excavator. It involves removing over 30 individual parts in a specific sequence, including the cover, gears, carrier assembly, planetary carrier, shafts and seals. Cleanliness is important to prevent dirt entering during disassembly. Tools including link brackets, eyebolts, and retaining ring pliers are required. The procedure removes components step-by-step and identifies each part and subassembly that must be dismantled from the final drive.
Caterpillar cat 324 d excavator (prefix mnd) service repair manual (mnd00001 ...fjskekdmmem
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and 33 steps to completely disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, sun gears, and housing components. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
The document provides instructions for disassembling a final drive component. It lists required tools and outlines 33 steps to disassemble the final drive. Key steps include removing the cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms. Weights of removed parts are provided.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...yfbr995309
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and removing gears and shafts.
The process separates the final drive into its main individual parts for repair or replacement.
The document provides instructions for disassembling a final drive component. It lists required tools and outlines 33 steps to disassemble the final drive. Key steps include removing the cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering parts. Weights of components are provided to assist with lifting.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...shudun96087
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and separating planetary gears.
The process requires cleaning components and noting part locations for reassembly.
Caterpillar Cat 325D L Excavator (Prefix AZP) Service Repair Manual (AZP00001...kesi7153062
The document provides instructions to disassemble the final drive of an excavator. Key steps include:
1. Marking and removing the final drive cover, gears, carrier assemblies, and planetary components.
2. Using tools like retaining ring pliers and a press to remove rings and shafts.
3. Dismantling the carrier assemblies by driving out spring pins and separating planetary gears.
The process requires cleaning components and noting part locations for reassembly.
Similar to Caterpillar Cat 324D Excavator (Prefix MND) Service Repair Manual (MND00001 and up).pdf (20)
The document provides instructions for removing and installing various engine components on a 325C excavator with a 3126B engine, including:
- Removing the camshaft by wiring the valve lifters away, removing retaining bolts and plate, and lifting out the camshaft.
- Installing the camshaft by ensuring timing marks are aligned, installing the retaining plate and bolts, and reinstalling the lifter group and front cover.
- Removing the camshaft gear by wrapping the camshaft, pressing it out of the gear, and removing any key if needed.
- Installing the camshaft gear by heating it, aligning the keyway, and pressing the
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine. It describes removing the lifter group and front cover, turning the crankshaft to top dead center, and wiring the valve lifters away from the camshaft. It then details removing the camshaft retainer plate and bolts and removing the camshaft from the cylinder block. Reinstallation is described as well.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, inlet and exhaust valves, and inlet and exhaust valve guides on a 325B L excavator with a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound and sealer, installing new gaskets, and torquing bolts to the specified values. Tools required include an anti-seize compound, high temperature sealer, valve spring compressor, and valve guide driver.
Caterpillar Cat 325B L Excavator (Prefix 4DS) Service Repair Manual (4DS00001...qme229722
This document provides instructions for removing and installing exhaust manifold, inlet manifold, inlet and exhaust valves, and inlet and exhaust valve guides on a 325B L excavator with a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound and sealant, installing new gaskets, and torquing bolts to the specified values. Tools required include a valve spring compressor, valve guide driver, anti-seize compound, and high temperature sealer.
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...qme229722
This document provides instructions for removing and installing inlet and exhaust valve seats in a Caterpillar 325L excavator engine. It outlines the required tools and gives a step-by-step process that includes using a valve seat extractor tool to remove the valve seat inserts from the cylinder head. New valve seat inserts are then installed using the appropriate tool and following the specified procedure. Safety notices are included to keep parts clean and contain fluids when working on the engine components.
Caterpillar Cat 325 L EXCAVATOR (Prefix 2SL) Service Repair Manual (2SL00001 ...qme229722
This document provides instructions for removing and installing inlet and exhaust valve seat inserts on a 325 L excavator. It begins with an overview of the required tools and safety notices. The removal procedure involves using a valve seat extractor tool to expand below the edge of the valve seat insert in order to remove it from the cylinder head. The installation procedure is not described, but refers the technician to install the new valve seat inserts using the same tools. Proper cleaning and inspection of parts is emphasized to prevent premature wear.
This document provides instructions for removing and installing inlet and exhaust valve seat inserts on a 325 L excavator. It begins with an overview of the required tools and safety notices. The removal procedure involves using a valve seat extractor tool to expand below the edge of the valve seat insert in order to remove it from the cylinder head. The installation procedure is not described, but refers the technician to install the new valve seat inserts using the same tools. Proper cleaning and inspection of parts is emphasized to prevent premature wear.
This document provides instructions for removing and installing exhaust manifold, inlet manifold, inlet and exhaust valves, and inlet and exhaust valve guides on a 325, 325L, 325LN excavator with a 3116 engine. The procedures include removing mounting bolts and studs, applying anti-seize compound, installing new gaskets, and tightening bolts to the specified torques. Tools required are also listed.
The document provides step-by-step instructions for disassembling and assembling a travel motor. Key steps include using various tools to remove the head, brake piston, rotating assembly, seals and other components. Assembly involves reversing the removal steps and ensuring proper installation of components like springs, seals, plates and bearing races in their correct positions and with lubrication.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...qme229722
The document provides step-by-step instructions for disassembling and assembling a travel motor. Key steps include using various tools to remove the head, brake piston, rotating assembly, seals and other components. Assembly involves reversing the removal steps and ensuring proper installation of components like springs, seals, plates and bearing races in their correct positions and with lubrication.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...qme229722
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head, seals, springs, brake piston, plates and discs.
2. Removing races, seals and other components from the housing and shaft.
3. Reassembling the components in reverse order, ensuring proper installation of seals, springs, plates and discs. Lubrication and torque specifications are provided.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual (JCZ00001...qme229722
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head, seals, springs, brake piston, plates, and friction discs from the motor body.
2. Using pullers and pry bars to remove the rotating assembly, shafts, races, and cam plate.
3. Reassembling involves installing seals, plates, springs, shafts, races, and the head in reverse order, taking care with alignment and torque specifications.
The document provides instructions for disassembling and assembling the travel motor of 324E and 324E L excavator models. It lists the required tools and presents step-by-step instructions to remove and install various components of the travel motor including the head, brake piston, seals, bearings, and more. Detailed illustrations accompany each step to show how to position components and use specialty tools for removal and installation. Proper lubrication and alignment of parts is emphasized to ensure correct assembly.
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like pistons, plates, seals.
2. Using specialized tools to pull bearings and races from the shaft and housing.
3. Reassembling the components in reverse order, making sure to lubricate seals and mating surfaces, and aligning parts properly. Precise reinstallation of pieces is emphasized.
This document provides the disassembly and assembly procedures for a travel motor on 324D L and 324D LN Excavator models. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, pistons, bearings, and seals. The assembly procedure reverses the disassembly steps and provides illustrations and notes for installing components back into the travel motor. Tools and torque specifications are listed that are required for the procedures.
Caterpillar Cat 324D L Excavator (Prefix T2D) Service Repair Manual (T2D00001...qme229722
The document provides instructions for disassembling a final drive assembly. It lists required tools and outlines 33 steps to disassemble the various components of the final drive. Key steps include removing the cover, carrier assembly, ring gears, and other internal parts. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 324D L Excavator (Prefix PYT) Service Repair Manual (PYT00001...qme229722
This document provides assembly instructions for a final drive on an excavator. It lists the required tools and parts. The instructions describe how to install bearings and seals into housings using presses and special tools. Shims are used to preload the bearings and are sized based on measurements taken with micrometers. Cleanliness is emphasized throughout the assembly process.
Caterpillar Cat 324D L Excavator (Prefix MND) Service Repair Manual (MND00001...qme229722
The document provides instructions for disassembling a final drive assembly. Key steps include:
1. Marking parts for alignment and securing the assembly to a repair stand using brackets.
2. Removing bolts and covers, lifting off heavy parts like the cover using lifting devices.
3. Dismantling internal components such as gears, plates, and plugs from the housing and covers.
Cleanliness is emphasized to prevent dirt from entering during reassembly.
Caterpillar Cat 324D L Excavator (Prefix JJG) Service Repair Manual (JJG00001...qme229722
The document provides instructions for disassembling the final drive of a 324D L Excavator. It lists required tools and outlines 33 steps to remove components such as the cover, carrier assembly, ring gears, and seals. Parts are to be removed using tools like lifting devices, hammers, punches, and retaining ring pliers. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 324D L Excavator (Prefix DFP) Service Repair Manual (DFP00001...qme229722
This service repair manual provides instructions for disassembling and assembling various components of a Caterpillar 324D and 324D L excavator engine, including:
- Removing and installing the front housing
- Removing and installing the camshaft idler gear
- Removing and installing the valve mechanism cover and valve mechanism cover base
- Removing the rocker shaft and pushrods
Detailed step-by-step instructions are provided for each procedure, along with illustrations to identify the specific components and torque specifications for fasteners. Technicians are advised to keep components clean and free of contaminants during disassembly and assembly.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 154-6181 Forcing Screw 1
D 138-7574 Link Bracket 2
E
5F-7366 Forcing Screw 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
F 1U-8846 Gasket Sealant 1
Start By:
a. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1 g00708089
2. Fasten the final drive to Tooling (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 312 kg (688 lb).
3/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. The weight of cover (2) is approximately 32 kg (70 lb). Remove cover
(2).
Illustration 3 g00708091
5. Remove thrust plate (3) from cover (2).
6. Remove plugs (4) from cover (2).
4/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 4 g00708235
7. Remove O-ring seals (5) from both plugs (4) that were in the cover.
Illustration 5 g00708092
8. Remove spacer (6) from carrier assembly (7).
9. Remove sun gear (8) from carrier assembly (7).
10. Remove carrier assembly (7) by lifting the carrier assembly straight up. The weight of
carrier assembly (7) is approximately 14 kg (30 lb).
Illustration 6 g01304883
11. Disassemble carrier assembly (7), as follows.
a. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
5/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 7 g00708144
b. Remove planetary shaft (9) with spring pin (10) from the carrier assembly.
c. Remove spring pin (10) from planetary shaft (9) with a hammer and a punch.
Illustration 8 g00708218
d. Remove thrust washers (11) and planetary gear (13) from the carrier assembly.
e. Remove bearing (12) from planetary gear (13).
12. Repeat Steps 11.a through 11.e in order to remove the remaining planetary gears from the
carrier assembly.
6/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 9 g00708162
13. Remove sun gear (14) from carrier assembly (15).
Illustration 10 g00708325
14. Remove spacer (16).
Illustration 11 g00708184
Note: It will be necessary to pry ring gears (17) away from main housing (18) in order to
install the lifting slings.
15. Fasten a suitable lifting device to ring gears (17), as shown. Remove the ring gears from
main housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
7/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 12 g00708360
16. Use a screwdriver or a chisel in order to separate the two ring gears (17).
Note: The two ring gears are held together with Tooling (F). It may be necessary to heat the
ring gears in order to soften the sealant. Do not heat over 135 °C (275 °F) for more than
thirty minutes.
Illustration 13 g00708172
17. Position a 12.7 mm (0.50 inch) shackle under carrier assembly (15).
18. Fasten a suitable lifting device to the shackle.
19. Slowly lift carrier assembly (15) from the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Disassemble carrier assembly (15), as follows.
Illustration 14 g00708175
a. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
8/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 15 g00708370
Illustration 16 g00708220
b. Remove planetary shaft (19) with spring pin (20) from the carrier assembly.
c. Remove spring pin (20) from planetary shaft (19) with a hammer and a punch.
d. Remove thrust washers (21) and planetary gear (23) from the carrier assembly.
e. Remove bearings (22) from planetary gear (23).
21. Repeat Steps 20.a through 20.e in order to remove the remaining planetary gears from the
carrier.
9/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 17 g00708186
22. Remove O-ring seal (24) from main housing (18).
Illustration 18 g00708187
23. Remove bolts (25) from gear (26).
Illustration 19 g00708202
24. Use Tooling (C) in order to remove gear (26) from main housing (18).
Note: The motor housing will separate from the main housing (18) once gear (26) is
removed. Make sure that the motor housing is supported.
10/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 20 g00708211
25. Remove shims (27) from the main housing.
Illustration 21 g00708212
26. Fasten Tooling (D) and a suitable lifting device to main housing (18), as shown.
27. Use a hammer and a punch in order to separate main housing (18) and the final drive
sprocket from the motor housing (28). The combined weight of main housing (18) and the
final drive sprocket is approximately 82 kg (180 lb).
Illustration 22 g00708214
28. Remove Duo-Cone seal (29) from motor housing (28).
29. Remove alignment pins (30).
11/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 23 g00708215
Illustration 24 g00708216
30. Remove Duo-Cone seal (31) from main housing (18).
31. Use Tooling (E) in order to remove bearings (32) and (33) from the main housing.
32. If necessary, remove the final drive sprocket from the main housing.
33. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 3 09:56:29 UTC+0800 2020
12/12
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324D EXCAVATOR MND
Configuration: 324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8646-22 Publication Date -01/02/2015 Date Updated -12/09/2018
i03508206
Final Drive - Disassemble
SMCS - 4050-015
S/N - A3R1022-UP
S/N - BFC1-UP
S/N - BYS1-UP
S/N - CYW1-UP
S/N - CZF1-UP
S/N - DBH380-UP
S/N - DJF1-UP
S/N - DTZ1-UP
S/N - EBM1-UP
S/N - EJC644-UP
S/N - GPB802-UP
S/N - J8D1-UP
S/N - J9D1-UP
S/N - JAT1-UP
S/N - JHJ1-UP
S/N - JJG814-UP
1/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G 138-7576 Link Bracket 2
Start By:
a. Start by removing the final drive. Refer to Disassembly and Assembly, "Final Drive -
Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled to the original locations.
Illustration 1 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto
Tooling (A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
3/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 2 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 3 g00892888
5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn.
Remove plugs (5) from cover (2).
Illustration 4 g00892906
6. Remove O-ring seals (7) from plugs (5).
4/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 5 g00892930
7. Remove gear (8) and spacer (9).
Illustration 6 g00892965
8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 7 g00892968
10. Remove retaining ring (15).
5/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 8 g00892975
11. Remove carrier assembly (16).
Illustration 9 g01389804
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 10 g00892977
6/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 13. Remove gear (17) and spacer (18).
Illustration 11 g00892997
14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 12 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 13 g00896860
16. Drive spring pin (23) into planetary shaft (22).
7/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 14 g00893043
17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 15 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 16 g01842853
20. Remove gear (27). Remove spacer (27A).
8/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 17 g01842974
21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 18 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 19 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
9/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engine...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 20 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 21 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring
gear (34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg
(146 lb).
Illustration 22 g01208542
10/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. 27. Remove O-ring seal (36) from sprocket housing (35).
Illustration 23 g01208553
28. Remove bolts (37) from coupling gear (38).
Illustration 24 g01208572
29. Install suitable forcing bolts (39) in coupling gear (38). Tighten the forcing bolts evenly in
order to loosen coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 25 g01208578
11/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Illustration 26 g01208625
30. Remove shims (40) from the motor housing.
Note: Inner cones and outer bearing cones (42) are a slip fit on the motor housing. While
you remove sprocket housing (35) from the motor housing, inner bearing cone (42) may
stay with the sprocket housing or the inner bearing cone may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the
sprocket housing from the motor housing. The weight of sprocket housing (35) is
approximately 109 kg (240 lb).
Illustration 27 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing
cone.
12/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 28 g01208633
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If inner bearing cone (42) remained on the sprocket housing, then remove the inner bearing
cone.
37. Remove the bearing cups from the sprocket housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 3 09:57:28 UTC+0800 2020
13/13
324D & 324D L Excavators MND00001-UP (MACHINE) POWERED BY C7 Engi...
2020/8/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...