This document provides instructions for disassembling and assembling the final drive of an excavator model 323F SA. It describes:
1) Removing over 30 individual components of the final drive such as the cover, carrier assembly, ring gears, and seals.
2) Reassembling the components in reverse order, including pressing bearings into the main housing and determining the correct shim thickness.
3) Applying anti-seize compound to bearings and sealant between ring gears during assembly.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...yin9niaojiao
The document provides instructions for disassembling an excavator final drive transmission. It begins by removing the final drive from the excavator and securing it to a repair stand. Various components are then removed in the following order: cover, gears, carrier assembly, planetary gears, ring gear, and coupling gear. Cleanliness is emphasized and tools/lifting devices are specified. The process involves over 30 individual steps.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...shibi1322
The document provides instructions for disassembling an excavator final drive transmission. It involves removing over 30 individual parts in a specific sequence, starting with removing the final drive from the machine and securing it to a repair stand. Key steps include removing the transmission cover, carrier assemblies, planetary gears, and separating the main housing from the motor housing. Cleanliness is emphasized and special tools are required to remove several components due to their weight.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...8foskkdjdkdm3e
The document provides instructions for servicing the transmission of a 329D L Excavator. It begins by having the technician remove the final drive by referring to another section of the manual. It then lists 33 steps to fully disassemble the transmission components, identifying required tools and cautioning to mark parts for reinstallation. Key steps include removing the cover, carrier assembly, planetary gears, and separating housing components, weighing parts to assist with lifting. Thorough cleaning is stressed before disassembly to prevent dirt intrusion.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...jkdkkdsmmd
The document provides instructions for disassembling a final drive transmission. It begins by removing the final drive from the excavator and securing it to a repair stand. Various components are then removed in sequential order, including the cover, gears, carrier assembly, planetary gears, and seals. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanism. Over 30 individual steps are outlined with descriptions and illustrations.
Caterpillar cat 329 d l excavator (prefix czf) service repair manual (czf0000...ufjskefsmekm
The document provides instructions for disassembling a final drive assembly. It involves removing 33 parts in 23 steps, including removing the cover, gears, carrier assembly, planetary carrier, and seals. Cleanliness is important to prevent dirt from entering during reassembly. Tools include a transmission repair stand, link brackets, retaining ring pliers, and eyebolts to lift components by weight.
Caterpillar cat 329 d l excavator (prefix czf) service repair manual (czf0000...fjjskekdmem
The document provides instructions for disassembling a final drive assembly. It involves removing 33 parts in 23 steps, including removing the cover, gears, carrier assembly, planetary carrier, and seals. Cleanliness is important to prevent dirt from entering during reassembly. Tools include a transmission repair stand, link brackets, retaining ring pliers, and eyebolts to lift components by weight.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 29 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, gears, and housing pieces in the reverse order of disassembly. Precautions are provided regarding cleanliness and applying lubricants to ensure proper operation of the reassembled final drive.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It details 33 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. It then details 13 steps for assembly, including pressing in bearings, installing seals with a special tool, and applying sealant between components. Proper cleaning and use of new parts is emphasized throughout.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...yin9niaojiao
The document provides instructions for disassembling an excavator final drive transmission. It begins by removing the final drive from the excavator and securing it to a repair stand. Various components are then removed in the following order: cover, gears, carrier assembly, planetary gears, ring gear, and coupling gear. Cleanliness is emphasized and tools/lifting devices are specified. The process involves over 30 individual steps.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...shibi1322
The document provides instructions for disassembling an excavator final drive transmission. It involves removing over 30 individual parts in a specific sequence, starting with removing the final drive from the machine and securing it to a repair stand. Key steps include removing the transmission cover, carrier assemblies, planetary gears, and separating the main housing from the motor housing. Cleanliness is emphasized and special tools are required to remove several components due to their weight.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...8foskkdjdkdm3e
The document provides instructions for servicing the transmission of a 329D L Excavator. It begins by having the technician remove the final drive by referring to another section of the manual. It then lists 33 steps to fully disassemble the transmission components, identifying required tools and cautioning to mark parts for reinstallation. Key steps include removing the cover, carrier assembly, planetary gears, and separating housing components, weighing parts to assist with lifting. Thorough cleaning is stressed before disassembly to prevent dirt intrusion.
Caterpillar Cat 329D L Excavator (Prefix CZF) Service Repair Manual Instant D...jkdkkdsmmd
The document provides instructions for disassembling a final drive transmission. It begins by removing the final drive from the excavator and securing it to a repair stand. Various components are then removed in sequential order, including the cover, gears, carrier assembly, planetary gears, and seals. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanism. Over 30 individual steps are outlined with descriptions and illustrations.
Caterpillar cat 329 d l excavator (prefix czf) service repair manual (czf0000...ufjskefsmekm
The document provides instructions for disassembling a final drive assembly. It involves removing 33 parts in 23 steps, including removing the cover, gears, carrier assembly, planetary carrier, and seals. Cleanliness is important to prevent dirt from entering during reassembly. Tools include a transmission repair stand, link brackets, retaining ring pliers, and eyebolts to lift components by weight.
Caterpillar cat 329 d l excavator (prefix czf) service repair manual (czf0000...fjjskekdmem
The document provides instructions for disassembling a final drive assembly. It involves removing 33 parts in 23 steps, including removing the cover, gears, carrier assembly, planetary carrier, and seals. Cleanliness is important to prevent dirt from entering during reassembly. Tools include a transmission repair stand, link brackets, retaining ring pliers, and eyebolts to lift components by weight.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 29 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, gears, and housing pieces in the reverse order of disassembly. Precautions are provided regarding cleanliness and applying lubricants to ensure proper operation of the reassembled final drive.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It details 33 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. It then details 13 steps for assembly, including pressing in bearings, installing seals with a special tool, and applying sealant between components. Proper cleaning and use of new parts is emphasized throughout.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 29 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, gears, and housing pieces in the reverse order of disassembly. Precautions are provided regarding cleanliness and applying lubricants to ensure proper operation of the reassembled final drive.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 13 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, and gears, and using shims to set proper bearing preload. Cleanliness and applying lubricant to parts are emphasized throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...tingrm81805
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...fujskemdidk8u
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, with an emphasis on applying sealants, lubricants and torque specifications to reassemble components properly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...nkog14651119
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...yu5676962
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Precise steps are outlined for disassembling the carrier assemblies, separating the ring gears, and removing other parts from the main housing. Specifications and required tools are also provided to ensure proper reassembly of the final drive.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...fujjsekmdm3ed
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, with an emphasis on applying sealants, lubricants and torque specifications to reassemble components properly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...tengtui535
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, including torque specifications and types of sealant to apply between mating parts.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Instructions are provided with illustrations and include precautions for lifting heavy parts and applying sealants. Torque specifications and part numbers are listed for reassembly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Instructions are provided with illustrations and include precautions for lifting heavy parts and applying sealants. Torque specifications and part numbers are listed for reassembly.
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. The disassembly process involves removing 28 individual parts and components from the final drive and related assemblies using various tools. The assembly process reverses the disassembly steps and requires aligning identification marks to ensure correct positioning of parts.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps to reassemble the final drive, applying anti-seize compound to bearings, installing bearing cups and cones, and refitting the various components removed during disassembly. The document includes detailed illustrations and references other service manuals for additional information.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and attaching the sprocket housing using lifting devices. Tools required include retaining ring pliers, eyebolts, and a transmission repair stand.
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. It begins with removing the final drive and describes dismantling it into individual parts like the ring gear, carrier assemblies, planetary gears and shafts. Alignment marks are noted to aid reassembly. The instructions then describe assembling the final drive components back into the final drive housing.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fios9dkksd
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. It begins with removing the final drive and associated parts like the cover, ring gear, carrier assemblies, and sprocket housing. It then describes disassembling each of these components and their internal parts. The assembly section provides the reverse steps for reassembling the final drive.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the ring gear, carrier assemblies, planetary gears, and sprocket housing. It then lists 21 steps to reassemble the final drive, including pressing in new bearing cups, installing bearing cones and inner races, and attaching the sprocket housing using lifting devices. Tools required include retaining ring pliers, eyebolts, and a transmission repair stand.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps to reassemble the final drive, applying anti-seize compound to bearings, installing bearing cups and cones, and refitting the various components removed during disassembly. The document includes detailed illustrations and references other manuals for additional information.
This document provides disassembly and assembly instructions for the transmission of a D6R track-type tractor. It details removing and installing over 80 individual parts. Key steps include separating the transmission from the bevel gear, removing the planetary group and transmission cover, and disassembling the individual clutch housings, gears, shafts, and carriers. Proper inspection and cleaning of parts is noted.
This document provides instructions for disassembling and assembling the final drive of a D6R track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, and hub. The assembly procedure describes installing these 19 components in reverse order and includes precautions for installing seals and bearings correctly.
More Related Content
Similar to Caterpillar Cat 323F LN Excavator (Prefix FA2) Service Repair Manual (FA210101 and up).pdf
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 29 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, gears, and housing pieces in the reverse order of disassembly. Precautions are provided regarding cleanliness and applying lubricants to ensure proper operation of the reassembled final drive.
This document provides instructions for disassembling and assembling the final drive of a 319D Excavator. It lists 33 steps for disassembly, which include removing covers, plates, gears, seals, and housing pieces. It also lists 13 steps for assembly, which include pressing bearings into place, measuring clearances, installing seals, pins, and gears, and using shims to set proper bearing preload. Cleanliness and applying lubricant to parts are emphasized throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...tingrm81805
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...fujskemdidk8u
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, with an emphasis on applying sealants, lubricants and torque specifications to reassemble components properly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...nkog14651119
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...yu5676962
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Precise steps are outlined for disassembling the carrier assemblies, separating the ring gears, and removing other parts from the main housing. Specifications and required tools are also provided to ensure proper reassembly of the final drive.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...fujjsekmdm3ed
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, with an emphasis on applying sealants, lubricants and torque specifications to reassemble components properly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...tengtui535
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Tools and specifications required for assembly are also listed, including torque specifications and types of sealant to apply between mating parts.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual (WZS00001...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Instructions are provided with illustrations and include precautions for lifting heavy parts and applying sealants. Torque specifications and part numbers are listed for reassembly.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, and housings. Instructions are provided with illustrations and include precautions for lifting heavy parts and applying sealants. Torque specifications and part numbers are listed for reassembly.
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. The disassembly process involves removing 28 individual parts and components from the final drive and related assemblies using various tools. The assembly process reverses the disassembly steps and requires aligning identification marks to ensure correct positioning of parts.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps to reassemble the final drive, applying anti-seize compound to bearings, installing bearing cups and cones, and refitting the various components removed during disassembly. The document includes detailed illustrations and references other service manuals for additional information.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and attaching the sprocket housing using lifting devices. Tools required include retaining ring pliers, eyebolts, and a transmission repair stand.
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. It begins with removing the final drive and describes dismantling it into individual parts like the ring gear, carrier assemblies, planetary gears and shafts. Alignment marks are noted to aid reassembly. The instructions then describe assembling the final drive components back into the final drive housing.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fios9dkksd
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345D Excavator. It begins with removing the final drive and associated parts like the cover, ring gear, carrier assemblies, and sprocket housing. It then describes disassembling each of these components and their internal parts. The assembly section provides the reverse steps for reassembling the final drive.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the ring gear, carrier assemblies, planetary gears, and sprocket housing. It then lists 21 steps to reassemble the final drive, including pressing in new bearing cups, installing bearing cones and inner races, and attaching the sprocket housing using lifting devices. Tools required include retaining ring pliers, eyebolts, and a transmission repair stand.
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the final drive cover, carrier assemblies, ring gear, and other parts. It then lists 21 steps to reassemble the final drive, applying anti-seize compound to bearings, installing bearing cups and cones, and refitting the various components removed during disassembly. The document includes detailed illustrations and references other manuals for additional information.
Similar to Caterpillar Cat 323F LN Excavator (Prefix FA2) Service Repair Manual (FA210101 and up).pdf (20)
This document provides disassembly and assembly instructions for the transmission of a D6R track-type tractor. It details removing and installing over 80 individual parts. Key steps include separating the transmission from the bevel gear, removing the planetary group and transmission cover, and disassembling the individual clutch housings, gears, shafts, and carriers. Proper inspection and cleaning of parts is noted.
This document provides instructions for disassembling and assembling the final drive of a D6R track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, and hub. The assembly procedure describes installing these 19 components in reverse order and includes precautions for installing seals and bearings correctly.
The document provides instructions for removing and installing final drives on a D6R track-type tractor. It describes:
1) Removing the final drives which involves draining oil, removing mounting bolts and hardware, and lifting the drive out.
2) Disassembling the final drives by removing planetary carriers, gears, shafts, seals, and other components.
3) Assembling the final drives by reversing the disassembly steps and ensuring proper installation of seals, gears, carriers, and mounting hardware.
4) Reinstalling the final drives by lifting them into place, inserting mounting bolts and hardware, and refilling with oil.
This document provides instructions for removing and disassembling a final drive from a D6R track-type tractor, as well as assembling a final drive. Key steps include using specialized tools to remove the final drive and axle, disassembling internal components like planetary gears and carriers, and precisely installing seals and bearings during assembly. Safety notices warn of risks like uncontrolled machine movement if brakes are ineffective during removal.
This document provides instructions for disassembling and assembling the torque divider of a D6R track-type tractor. It describes removing and installing over 30 different components of the torque divider. Key steps include using tools and hoists to remove large components like the torque divider housing weighing 145 kg, and precisely measuring clearances between components like the stator and turbine wheel to be between 1.76 to 1.94 mm. Reassembly involves installing bearings and seals, heating components, and torquing bolts to specified values.
This document provides instructions for disassembling and assembling the bevel and transfer gears of a D6R track-type tractor. It describes removing over 30 individual components in 26 steps, including the transmission gears, bearings, seals, and housings. Reassembly is outlined in 38 steps, with specifics on heating and installing bearings, applying sealant, adjusting end play and backlash using shims and gauges, and torquing bolts. The document is highly technical and aimed at mechanics performing gearbox maintenance and repairs.
This document provides instructions for disassembling and assembling the swing drive of an excavator model 558. It details 25 steps for disassembly, removing components like gears, shafts, seals and housings. It notes cleaning and inspecting parts before assembly. The assembly section lists 13 steps to reinstall components in reverse order, applying compounds and ensuring cleanliness. Special tools are listed to aid in removal and installation of heavy components weighing up to 510kg. Safety precautions are provided to contain fluids and protect personnel.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...hdjsjndndnd
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
The document provides instructions for removing and installing final drives, steering clutches, and brakes on a D6R track-type tractor. Key steps include:
1) Draining oil from the final drive and removing covers, axles, and bolts holding components in place.
2) Using lifting tools and hoists to remove heavy components like final drives weighing over 600 kg.
3) Inspecting seals and bearings during disassembly and applying clean oil during assembly.
4) Heating and pressing bearings and seals into place during reassembly and torquing bolts to specified values.
Caterpillar Cat 390D L Excavator (Prefix WBT) Service Repair Manual (WBT00001...hdjsjndndnd
This document provides disassembly and assembly instructions for the travel motor on a 390D L excavator. It describes 40 steps to disassemble the travel motor, removing components like the head, relief valves, pistons, springs, seals and bearings. It then describes 3 steps to begin reassembling the travel motor, starting with installing the lip seal, bearing and retaining ring. Detailed illustrations are provided for each step. Cleanliness and applying lubricant to parts are emphasized during disassembly and assembly.
Caterpillar Cat 385C L Excavator (Prefix KKK) Service Repair Manual (KKK00001...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive of a 385C excavator. It begins with a list of required tools. The disassembly procedure has 33 steps that remove components like the housing cover, carrier assemblies, planetary gears, ring gear, and seals. The assembly procedure has 17 steps that install components in reverse order, noting the importance of cleanliness and applying lubricants where specified.
Caterpillar Cat D6R III TRACK-TYPE TRACTOR (Prefix JDL) Service Repair Manual...hdjsjndndnd
The document provides instructions for disassembling and assembling the final drive of a D6R III track-type tractor. The disassembly procedure involves 19 steps to remove components such as the planetary carrier, gears, seals, and hub. The assembly procedure describes 15 steps including pressing components, installing seals and bearings at specified temperatures, and torquing bolts to the correct specifications. Proper cleaning, lubrication, and use of specialized tools are emphasized to correctly perform the processes.
The document provides instructions for disassembling and assembling the travel motor of a 385C Excavator. It lists 40 steps for disassembly, including removing the head, relief valves, spools, pistons, springs, port plate, and other internal components. It then lists 16 steps for reassembly, starting with installing internal seals and moving outward to reinstalling the piston, port plate, spools, and head. Precautions are provided regarding cleaning parts, applying oil, and ensuring proper alignment of components.
Caterpillar Cat D6R III TRACK-TYPE TRACTOR (Prefix HCD) Service Repair Manual...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive components of a Caterpillar D6R III track-type tractor. The disassembly process involves using various tools to remove 19 components including planetary gears, bearings, seals, and hubs. The assembly process similarly uses tools to reinstall the components in the reverse order, taking care to clean parts and apply oil, and heat or cool components as needed to ensure proper installation. Special installation procedures are specified for seals and bearings.
This document provides instructions for disassembling and assembling the final drive of a 385C excavator. It begins with a list of required tools. The disassembly procedure has 33 steps that remove components like the housing cover, carrier assemblies, planetary gears, ring gear, and seals. The assembly procedure has 17 steps that install components in reverse order, noting the importance of cleanliness and applying lubricants where specified.
This document provides instructions for disassembling the control valve for the attachment, bucket, boom, right travel, left travel, and stick systems of a 385B Excavator. It outlines 25 steps to disassemble the various components of the control valve, including removing covers, seals, valves, pistons, solenoids, manifolds, and other parts. Precautions are provided to watch out for spring forces and to keep components clean during disassembly. Tools required include pliers. The goal is to disassemble the control valve into its individual parts to allow for inspection and replacement of any worn components.
Caterpillar Cat D6R II TRACK-TYPE TRACTOR (Prefix FDT) Service Repair Manual ...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive of a D6R II track-type tractor. The disassembly process involves using various tools to remove 19 different parts from the final drive assembly, including the planetary carrier, gears, seals, and hub. The assembly process describes 16 steps for reinstalling the parts in reverse order and includes safety notices and requirements for cleaning, lubricating, and heating components.
Caterpillar Cat D6R II TRACK-TYPE TRACTOR (Prefix BRJ) Service Repair Manual ...hdjsjndndnd
The document provides instructions for disassembling the transmission of a D6R II track-type tractor. It lists the required tools and gives step-by-step instructions to remove components such as tubes, valves, gears, housings, pistons, seals, and plates. Special care must be taken to keep parts like discs and plates organized according to their clutch assemblies. Dismantling involves using lifting devices and compression tools to handle heavy internal components.
Caterpillar Cat D6R II TRACK-TYPE TRACTOR (Prefix BLE) Service Repair Manual ...hdjsjndndnd
This document provides instructions for disassembling and assembling the final drive of a D6R II track-type tractor. The disassembly procedure involves using various tools to remove 19 parts from the final drive assembly, including the planetary carrier, gears, seals, and hub. The assembly procedure describes 16 steps for installing the parts in reverse order, noting the importance of cleanliness and applying oil during assembly. Torque specifications and heating instructions are provided for certain bolts and bearings.
Caterpillar Cat D6R II TRACK-TYPE TRACTOR (Prefix BMK) Service Repair Manual ...hdjsjndndnd
The document provides instructions for disassembling and assembling the final drive of a D6R II track-type tractor. It describes in detail how to remove and install components such as the planetary carrier, hub, ring gear, and seals using the proper tools. Cleanliness is emphasized throughout the process to prevent dirt from entering parts. Proper bearing installation and torque specifications are also outlined to ensure correct assembly.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F SA EXCAVATOR FA2
Configuration: 323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
320F, 323F Excavators Machine Systems
Media Number -M0066628-06 Publication Date -01/09/2018 Date Updated -18/09/2018
i06226012
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 154-6181 Forcing Bolt 1
D 138-7574 Link Bracket 2
E
5F-7366 Forcing Bolt 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
F 1U-8846 Gasket Sealant 1
Start By:
a. Remove the final drive.
1/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1 g00708089
2. Fasten the final drive to Tooling (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. The weight of cover (2) is approximately 32 kg (70 lb). Remove cover
(2).
2/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00708091
5. Remove thrust plate (3) from cover (2).
6. Remove plugs (4) from cover (2).
Illustration 4 g00708235
7. Remove O-ring seals (5) from both plugs (4) that were in the cover.
Illustration 5 g00708092
8. Remove spacer (6) from carrier assembly (7).
9. Remove sun gear (8) from carrier assembly (7).
10. Remove carrier assembly (7) by lifting the carrier assembly straight up. The weight of
carrier assembly (7) is approximately 14 kg (30 lb).
3/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g01304883
11. Disassemble carrier assembly (7), as follows.
a. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
Illustration 7 g00708144
b. Remove planetary shaft (9) with spring pin (10) from the carrier assembly.
c. Remove spring pin (10) from planetary shaft (9) with a hammer and a punch.
Illustration 8 g00708218
d. Remove thrust washers (11) and planetary gear (13) from the carrier assembly.
4/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. e. Remove bearing (12) from planetary gear (13).
12. Repeat Steps 11.a through 11.e in order to remove the remaining planetary gears from the
carrier assembly.
Illustration 9 g00708162
13. Remove sun gear (14) from carrier assembly (15).
Illustration 10 g00708325
14. Remove spacer (16).
Illustration 11 g00708184
5/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Note: It will be necessary to pry ring gears (17) away from main housing (18) in order to
install the lifting slings.
15. Fasten a suitable lifting device to ring gears (17), as shown. Remove the ring gears from
main housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
Illustration 12 g00708360
16. Use a screwdriver or a chisel in order to separate the two ring gears (17).
Note: The two ring gears are held together with Tooling (F). It may be necessary to heat the
ring gears in order to soften the sealant. Do not heat over 135 °C (275 °F) for more than
thirty minutes.
Illustration 13 g00708172
17. Position a 12.7 mm (0.50 inch) shackle under carrier assembly (15).
18. Fasten a suitable lifting device to the shackle.
19. Slowly lift carrier assembly (15) from the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Disassemble carrier assembly (15), as follows.
6/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00708175
a. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
Illustration 15 g00708370
Illustration 16 g00708220
b. Remove planetary shaft (19) with spring pin (20) from the carrier assembly.
c. Remove spring pin (20) from planetary shaft (19) with a hammer and a punch.
d. Remove thrust washers (21) and planetary gear (23) from the carrier assembly.
e. Remove bearings (22) from planetary gear (23).
7/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 21. Repeat Steps 20.a through 20.e in order to remove the remaining planetary gears from the
carrier.
Illustration 17 g00708186
22. Remove O-ring seal (24) from main housing (18).
Illustration 18 g00708187
23. Remove bolts (25) from gear (26).
Illustration 19 g00708202
24. Use Tooling (C) in order to remove gear (26) from main housing (18).
8/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Note: The motor housing will separate from the main housing (18) once gear (26) is
removed. Make sure that the motor housing is supported.
Illustration 20 g00708211
25. Remove shims (27) from the main housing.
Illustration 21 g00708212
26. Fasten Tooling (D) and a suitable lifting device to main housing (18), as shown.
27. Use a hammer and a punch in order to separate main housing (18) and the final drive
sprocket from the motor housing (28). The combined weight of main housing (18) and the
final drive sprocket is approximately 82 kg (180 lb).
9/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 22 g00708214
28. Remove Duo-Cone seal (29) from motor housing (28).
29. Remove alignment pins (30).
Illustration 23 g00708215
Illustration 24 g00708216
30. Remove Duo-Cone seal (31) from main housing (18).
31. Use Tooling (E) in order to remove bearings (32) and (33) from the main housing.
32. If necessary, remove the final drive sprocket from the main housing.
33. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 7 22:36:16 UTC+0800 2020
10/10
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M00...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F SA EXCAVATOR FA2
Configuration: 323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
320F, 323F Excavators Machine Systems
Media Number -M0066628-06 Publication Date -01/09/2018 Date Updated -18/09/2018
i06226016
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
D 138-7574 Link Bracket 2
G 126-3994 Duo-Cone Seal Installer 1
H 5P-3931 Anti-Seize Compound
F 1U-8846 Gasket Sealant
Note: Apply a light film of hydraulic oil to all components before assembly.
1. Install the final drive sprocket if the sprocket was removed from the main housing.
2. Remove the final drive sprocket.
1/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g00708215
3. Apply Tooling (H) to the outer diameter of the bearings.
4. Install bearings (32) and (33) in main housing (18) with a suitable press.
5. Make sure that bearing (32) and bearing (33) contact the counterbore in the main housing.
6. Use the following procedure to preload the bearings and determine the correct thickness of
shims.
Illustration 2 g00713058
a. Fasten Tooling (D) and a suitable lifting device to main housing (18). Install the main
housing on the motor housing.
b. Put the main housing and the motor housing in a suitable press.
2/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g00709278
(a) Bearing surface
(b) Housing surface
c. Use a suitable press and a spacer in order to apply a load of 4000 kg (8819 lb) on the
bearings. Rotate the housing in order to seat the bearings.
d. Reduce the load on the bearings to 1000 ± 100 kg (2205 ± 221 lb).
e. Use a depth micrometer in order to measure the step length between the bearing
surface and the housing surface. Take measurements at several different locations
around the housing. Compute the average of the measured dimensions and record the
number. Call this Dimension (Y).
Illustration 4 g00709276
f. Use a depth micrometer in order to measure the step length of the coupling gear (26).
Take measurements at several different locations around the gear. Compute the
average of the measured dimensions and record the number. Call this Dimension (X).
g. The thickness of the shims is equal to (X − Y) ± 0.05 mm (0.002 inch).
Note: Use no more than two shims. If two shims are required, install the thinner shim
next to the gear.
h. Remove the main housing from the motor housing.
3/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g01021370
7. Use Tooling (G) in order to install Duo-Cone seal (31) in main housing (18). Refer to
Disassembly and Assembly, "Duo-Cone Conventional Seals - Install".
Note: The rubber seals and all surfaces that contact the seals must be clean and dry. After
installation of the seals, put clean SAE 30 oil on the contact surfaces of the metal seals.
Illustration 6 g01021371
8. Use Tooling (G) in order to install Duo-Cone seal (29) in motor housing (28).
Illustration 7 g00708214
4/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 9. Apply Tooling (H) to the surfaces that contact pins (30).
10. Install alignment pins (30).
Note: Do not damage the Duo-Cone seals in the main housing or in the motor housing
during the assembly of the two components. After installation of the main housing on the
motor housing, there will be a small gap between the components. The gap is caused by the
Duo-Cone seals. This gap will be eliminated during installation of gear (26).
Illustration 8 g00713058
11. Fasten Tooling (D) and a suitable lifting device to main housing (18). Install the main
housing on the motor housing.
Illustration 9 g00708211
12. Install shims (27) that were determined in Step 6.g in the main housing.
Note: If two shims are required, install the thinner shim next to the gear.
5/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 10 g00708187
13. Install gear (26).
14. Install bolts (25) in gear (26). Install the bolts in an even pattern until the gear is seated
against the bearing. Tighten bolts (25) in a crisscross pattern.
Illustration 11 g00708186
15. Install O-ring seal (24) to main housing (18).
Illustration 12 g00708175
16. Assemble carrier assembly (15), as follows.
6/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 13 g00708220
a. Install bearings (22) in planetary gear (23).
b. Install thrust washers (21) and planetary gear (23) in the carrier assembly.
c. Use a deburring tool in order to remove the metal burr from the openings in the
carrier. Install planetary shaft (19) in the carrier assembly.
d. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
Illustration 14 g00513451
e. Orient the split in spring pin (20) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 1.50 mm (0.059 inch) from
the outside diameter of the spring pin hole.
17. Repeat Steps 16.a through 16.e in order to install the remaining planetary gears in the carrier
assembly.
7/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 15 g00708172
18. Install a lifting sling through the middle of carrier assembly (15). Fasten a 12.7 mm
(0.50 inch) shackle to the suitable lifting device.
19. Install carrier assembly (15) on the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Remove the shackle and the suitable lifting device.
Illustration 16 g00713148
21. Apply Tooling (F) to the mating surface of ring gear (17b).
22. Install ring gear (17a) on ring gear (17b).
8/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 17 g00708184
23. Fasten a suitable lifting device to ring gears (17), as shown. Install the ring gears to main
housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
Illustration 18 g00708325
24. Install spacer (16) in the carrier assembly.
Illustration 19 g00708162
25. Install sun gear (14) in carrier assembly (15).
9/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 20 g01304883
Illustration 21 g00708218
26. Assemble carrier assembly (7), as follows.
a. Install bearing (12) in planetary gear (13).
b. Install thrust washers (11) and planetary gear (13) in the carrier assembly.
c. Install planetary shaft (9) in the carrier assembly.
d. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
Illustration 22 g00513451
e. Orient the split in spring pin (10) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 1.50 mm (0.059 inch) from
the outside diameter of the spring pin hole.
10/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M00...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 27. Repeat Steps 26.a through 26.e in order to install the remaining planetary gears in the carrier
assembly.
Illustration 23 g00708092
28. Install carrier assembly (7) in the ring gear. The weight of carrier assembly (7) is
approximately 14 kg (30 lb).
29. Install sun gear (8) in carrier assembly (7).
30. Install spacer (6) in carrier assembly (7).
Illustration 24 g00708235
31. Install new O-ring seals (5) on plugs (4) that were in the cover.
11/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M00...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 25 g00708091
32. Install plugs (4) in cover (2). Tighten plugs (4) to a torque of 80 ± 10 N·m (59 ± 7 lb ft).
33. Install thrust plate (3) in cover (2).
34. Apply Tooling (F) to the mating surface of the ring gear.
Illustration 26 g00708090
35. Fasten Tooling (B) and a suitable lifting device to cover (2), as shown. The weight of cover
(2) is approximately 32 kg (70 lb). Install cover (2).
36. Remove Tooling (B). Install the setscrews in cover (2).
Illustration 27 g00708089
37. Install bolts (1) and the washers that hold the cover in position. Tighten bolts (1) in a
crisscross pattern.
38. Remove the final drive from Tooling (A). The combined weight of the final drive and final
drive sprocket is approximately 310 kg (683 lb).
End By:
a. Install the final drive.
12/13
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M00...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F SA EXCAVATOR FA2
Configuration: 323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
320F, 323F Excavators Machine Systems
Media Number -M0066628-06 Publication Date -01/09/2018 Date Updated -18/09/2018
i07240392
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
S/N - FA21-UP
S/N - MFY1-UP
S/N - NHD1-UP
S/N - REW1-UP
S/N - YBM1-UP
S/N - YEC1-UP
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439–3939 Link Bracket As 1
B - Loctite C5A Copper Anti-Seize -
Start By:
a. Separate the track.
1. Drain the oil from the final drive.
1/3
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g02708415
2. Remove bolts (1) and cover (2).
Illustration 2 g02708757
3. Remove six bolts (3). Relocate the counterbalance valve.
Illustration 3 g02708761
2/3
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 4 g02708759
4. Attach Tooling (A) and a suitable lifting device to final drive (4). The weight of final drive
(4) is approximately 312 kg (688 lb).
5. Disconnect hose assemblies (5). Remove bolts (6) and remove final drive (4).
Installation Procedure
1. Install final drive (4) in the reverse order of removal.
a. Before assembly, remove compound, oil, and dust from female threads, then apply
Tooling (B) to the threads of bolts (6).
b. Tighten bolts (6) in an alternating sequence to a torque of 150 ± 25 N·m
(111 ± 18 lb ft). Turn an additional angle of 55 ± 5 degrees. Refer to Service
Magazine , M0083843 , "An Improved Bolt Tightening Procedure for the Critical
Joints Is Now Used on all Excavators" for more detailed information.
c. Tighten bolts (3) to a torque of 80 ± 8 N·m (59 ± 6 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 7 22:38:15 UTC+0800 2020
3/3
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F SA EXCAVATOR FA2
Configuration: 323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
320F, 323F Excavators Machine Systems
Media Number -M0066628-06 Publication Date -01/09/2018 Date Updated -18/09/2018
i06280845
Swivel - Remove and Install
SMCS - 5060-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 5P-3050 Floor Jack Gp 1
C 138-7575 Link Bracket 2
D - Loctite 242 -
E 1P-2420 Transmission Repair Stand 1
Illustration 1 g02726974
1/5
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g02615566
2. Attach Tooling (B) under guard (2). The weight of guard (2) is approximately 75 kg
(165 lb). Loosen bolts (1), slide bolts inward to release the locks. Remove guard (2).
Illustration 3 g02626110
3. Remove bracket (3). Remove hose assemblies (4).
Illustration 4 g02626112
2/5
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
30. 4. Remove hose assemblies (6). Remove fittings (5).
Illustration 5 g02615556
5. Remove hose assemblies (7), hose assemblies (8), and fittings (9) from swivel (10).
Illustration 6 g02615564
6. Remove hose assemblies and fittings (11). Remove bolts (12).
Illustration 7 g02727286
7. Attach Tooling (C) and a suitable lifting device to swivel (10). The weight of the swivel
(10) is approximately 50 kg (110 lb). Remove clamp (13), retainer (14) and boot (15).
3/5
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Illustration 11 g02615562
10. Attach Tooling (C) and a suitable lifting device to the swivel and locate in Tooling (E). The
weight of swivel (10) is approximately 45 kg (100 lb). Remove rotor (18) from swivel
housing (19).
Illustration 12 g02615563
11. Remove seals (20).
Installation Procedure
1. Install swivel (10) in the reverse order of removal.
Note: Lubricate seals (20) and rotor (18) with clean hydraulic oil for assembly.
a. Apply sealant between the mating surface of swivel (10) and the undercarriage before
installing swivel (10). Apply Tooling (D) to bolts (12).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 7 22:39:14 UTC+0800 2020
5/5
323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine(M0092...
2020/10/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...